summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)AuthorFilesLines
2020-07-22genirq/affinity: Handle affinity setting on inactive interrupts correctlyThomas Gleixner1-17/+5
commit baedb87d1b53532f81b4bd0387f83b05d4f7eb9a upstream. Setting interrupt affinity on inactive interrupts is inconsistent when hierarchical irq domains are enabled. The core code should just store the affinity and not call into the irq chip driver for inactive interrupts because the chip drivers may not be in a state to handle such requests. X86 has a hacky workaround for that but all other irq chips have not which causes problems e.g. on GIC V3 ITS. Instead of adding more ugly hacks all over the place, solve the problem in the core code. If the affinity is set on an inactive interrupt then: - Store it in the irq descriptors affinity mask - Update the effective affinity to reflect that so user space has a consistent view - Don't call into the irq chip driver This is the core equivalent of the X86 workaround and works correctly because the affinity setting is established in the irq chip when the interrupt is activated later on. Note, that this is only effective when hierarchical irq domains are enabled by the architecture. Doing it unconditionally would break legacy irq chip implementations. For hierarchial irq domains this works correctly as none of the drivers can have a dependency on affinity setting in inactive state by design. Remove the X86 workaround as it is not longer required. Fixes: 02edee152d6e ("x86/apic/vector: Ignore set_affinity call for inactive interrupts") Reported-by: Ali Saidi <alisaidi@amazon.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Ali Saidi <alisaidi@amazon.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200529015501.15771-1-alisaidi@amazon.com Link: https://lkml.kernel.org/r/877dv2rv25.fsf@nanos.tec.linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-22arm64: compat: Ensure upper 32 bits of x0 are zero on syscall returnWill Deacon2-1/+14
commit 15956689a0e60aa0c795174f3c310b60d8794235 upstream. Although we zero the upper bits of x0 on entry to the kernel from an AArch32 task, we do not clear them on the exception return path and can therefore expose 64-bit sign extended syscall return values to userspace via interfaces such as the 'perf_regs' ABI, which deal exclusively with 64-bit registers. Explicitly clear the upper 32 bits of x0 on return from a compat system call. Cc: <stable@vger.kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Keno Fischer <keno@juliacomputing.com> Cc: Luis Machado <luis.machado@linaro.org> Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-22arm64: ptrace: Consistently use pseudo-singlestep exceptionsWill Deacon4-16/+23
commit ac2081cdc4d99c57f219c1a6171526e0fa0a6fff upstream. Although the arm64 single-step state machine can be fast-forwarded in cases where we wish to generate a SIGTRAP without actually executing an instruction, this has two major limitations outside of simply skipping an instruction due to emulation. 1. Stepping out of a ptrace signal stop into a signal handler where SIGTRAP is blocked. Fast-forwarding the stepping state machine in this case will result in a forced SIGTRAP, with the handler reset to SIG_DFL. 2. The hardware implicitly fast-forwards the state machine when executing an SVC instruction for issuing a system call. This can interact badly with subsequent ptrace stops signalled during the execution of the system call (e.g. SYSCALL_EXIT or seccomp traps), as they may corrupt the stepping state by updating the PSTATE for the tracee. Resolve both of these issues by injecting a pseudo-singlestep exception on entry to a signal handler and also on return to userspace following a system call. Cc: <stable@vger.kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Tested-by: Luis Machado <luis.machado@linaro.org> Reported-by: Keno Fischer <keno@juliacomputing.com> Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-22arm64: ptrace: Override SPSR.SS when single-stepping is enabledWill Deacon3-6/+20
commit 3a5a4366cecc25daa300b9a9174f7fdd352b9068 upstream. Luis reports that, when reverse debugging with GDB, single-step does not function as expected on arm64: | I've noticed, under very specific conditions, that a PTRACE_SINGLESTEP | request by GDB won't execute the underlying instruction. As a consequence, | the PC doesn't move, but we return a SIGTRAP just like we would for a | regular successful PTRACE_SINGLESTEP request. The underlying problem is that when the CPU register state is restored as part of a reverse step, the SPSR.SS bit is cleared and so the hardware single-step state can transition to the "active-pending" state, causing an unexpected step exception to be taken immediately if a step operation is attempted. In hindsight, we probably shouldn't have exposed SPSR.SS in the pstate accessible by the GPR regset, but it's a bit late for that now. Instead, simply prevent userspace from configuring the bit to a value which is inconsistent with the TIF_SINGLESTEP state for the task being traced. Cc: <stable@vger.kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Keno Fischer <keno@juliacomputing.com> Link: https://lore.kernel.org/r/1eed6d69-d53d-9657-1fc9-c089be07f98c@linaro.org Reported-by: Luis Machado <luis.machado@linaro.org> Tested-by: Luis Machado <luis.machado@linaro.org> Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-22powerpc/pseries/svm: Fix incorrect check for shared_lppaca_sizeSatheesh Rajendran1-1/+1
commit b710d27bf72068b15b2f0305d825988183e2ff28 upstream. Early secure guest boot hits the below crash while booting with vcpus numbers aligned with page boundary for PAGE size of 64k and LPPACA size of 1k i.e 64, 128 etc. Partition configured for 64 cpus. CPU maps initialized for 1 thread per core ------------[ cut here ]------------ kernel BUG at arch/powerpc/kernel/paca.c:89! Oops: Exception in kernel mode, sig: 5 [#1] LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA pSeries This is due to the BUG_ON() for shared_lppaca_total_size equal to shared_lppaca_size. Instead the code should only BUG_ON() if we have exceeded the total_size, which indicates we've overflowed the array. Fixes: bd104e6db6f0 ("powerpc/pseries/svm: Use shared memory for LPPACA structures") Cc: stable@vger.kernel.org # v5.4+ Signed-off-by: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com> Reviewed-by: Laurent Dufour <ldufour@linux.ibm.com> Reviewed-by: Thiago Jung Bauermann <bauerman@linux.ibm.com> [mpe: Reword change log to clarify we're fixing not removing the check] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200619070113.16696-1-sathnaga@linux.vnet.ibm.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-22powerpc/book3s64/pkeys: Fix pkey_access_permitted() for execute disable pkeyAneesh Kumar K.V1-5/+7
commit 192b6a780598976feb7321ff007754f8511a4129 upstream. Even if the IAMR value denies execute access, the current code returns true from pkey_access_permitted() for an execute permission check, if the AMR read pkey bit is cleared. This results in repeated page fault loop with a test like below: #define _GNU_SOURCE #include <errno.h> #include <stdio.h> #include <stdlib.h> #include <signal.h> #include <inttypes.h> #include <assert.h> #include <malloc.h> #include <unistd.h> #include <pthread.h> #include <sys/mman.h> #ifdef SYS_pkey_mprotect #undef SYS_pkey_mprotect #endif #ifdef SYS_pkey_alloc #undef SYS_pkey_alloc #endif #ifdef SYS_pkey_free #undef SYS_pkey_free #endif #undef PKEY_DISABLE_EXECUTE #define PKEY_DISABLE_EXECUTE 0x4 #define SYS_pkey_mprotect 386 #define SYS_pkey_alloc 384 #define SYS_pkey_free 385 #define PPC_INST_NOP 0x60000000 #define PPC_INST_BLR 0x4e800020 #define PROT_RWX (PROT_READ | PROT_WRITE | PROT_EXEC) static int sys_pkey_mprotect(void *addr, size_t len, int prot, int pkey) { return syscall(SYS_pkey_mprotect, addr, len, prot, pkey); } static int sys_pkey_alloc(unsigned long flags, unsigned long access_rights) { return syscall(SYS_pkey_alloc, flags, access_rights); } static int sys_pkey_free(int pkey) { return syscall(SYS_pkey_free, pkey); } static void do_execute(void *region) { /* jump to region */ asm volatile( "mtctr %0;" "bctrl" : : "r"(region) : "ctr", "lr"); } static void do_protect(void *region) { size_t pgsize; int i, pkey; pgsize = getpagesize(); pkey = sys_pkey_alloc(0, PKEY_DISABLE_EXECUTE); assert (pkey > 0); /* perform mprotect */ assert(!sys_pkey_mprotect(region, pgsize, PROT_RWX, pkey)); do_execute(region); /* free pkey */ assert(!sys_pkey_free(pkey)); } int main(int argc, char **argv) { size_t pgsize, numinsns; unsigned int *region; int i; /* allocate memory region to protect */ pgsize = getpagesize(); region = memalign(pgsize, pgsize); assert(region != NULL); assert(!mprotect(region, pgsize, PROT_RWX)); /* fill page with NOPs with a BLR at the end */ numinsns = pgsize / sizeof(region[0]); for (i = 0; i < numinsns - 1; i++) region[i] = PPC_INST_NOP; region[i] = PPC_INST_BLR; do_protect(region); return EXIT_SUCCESS; } The fix is to only check the IAMR for an execute check, the AMR value is not relevant. Fixes: f2407ef3ba22 ("powerpc: helper to validate key-access permissions of a pte") Cc: stable@vger.kernel.org # v4.16+ Reported-by: Sandipan Das <sandipan@linux.ibm.com> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> [mpe: Add detail to change log, tweak wording & formatting] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200712132047.1038594-1-aneesh.kumar@linux.ibm.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-22riscv: use 16KB kernel stack on 64-bitAndreas Schwab1-0/+4
commit 0cac21b02ba5f3095fd2dcc77c26a25a0b2432ed upstream. With the current 8KB stack size there are frequent overflows in a 64-bit configuration. We may split IRQ stacks off in the future, but this fixes a number of issues right now. Signed-off-by: Andreas Schwab <schwab@suse.de> Reviewed-by: Anup Patel <anup@brainfault.org> [Palmer: mention irqstack in the commit text] Fixes: 7db91e57a0ac ("RISC-V: Task implementation") Cc: stable@vger.kernel.org Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-22arm: dts: mt7623: add phy-mode property for gmac2Sean Wang1-0/+1
commit ff5b89c2858f28006f9f9c0a88c55a679488192c upstream. Add phy-mode property required by phylink on gmac2 Fixes: b8fc9f30821e ("net: ethernet: mediatek: Add basic PHYLINK support") Signed-off-by: Sean Wang <sean.wang@mediatek.com> Link: https://lore.kernel.org/r/70e3eff31ecd500ed4862d9de28325a4dbd15105.1583648927.git.sean.wang@mediatek.com Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-22copy_xstate_to_kernel: Fix typo which caused GDB regressionKevin Buettner1-1/+1
commit 5714ee50bb4375bd586858ad800b1d9772847452 upstream. This fixes a regression encountered while running the gdb.base/corefile.exp test in GDB's test suite. In my testing, the typo prevented the sw_reserved field of struct fxregs_state from being output to the kernel XSAVES area. Thus the correct mask corresponding to XCR0 was not present in the core file for GDB to interrogate, resulting in the following behavior: [kev@f32-1 gdb]$ ./gdb -q testsuite/outputs/gdb.base/corefile/corefile testsuite/outputs/gdb.base/corefile/corefile.core Reading symbols from testsuite/outputs/gdb.base/corefile/corefile... [New LWP 232880] warning: Unexpected size of section `.reg-xstate/232880' in core file. With the typo fixed, the test works again as expected. Signed-off-by: Kevin Buettner <kevinb@redhat.com> Fixes: 9e4636545933 ("copy_xstate_to_kernel(): don't leave parts of destination uninitialized") Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Dave Airlie <airlied@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-22arm64: dts: spcfpga: Align GIC, NAND and UART nodenames with dtschemaKrzysztof Kozlowski1-4/+4
[ Upstream commit 681a5c71fb829fc2193e3bb524af41525477f5c3 ] Fix dtschema validator warnings like: intc@fffc1000: $nodename:0: 'intc@fffc1000' does not match '^interrupt-controller(@[0-9a-f,]+)*$' Fixes: 78cd6a9d8e15 ("arm64: dts: Add base stratix 10 dtsi") Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Dinh Nguyen <dinguyen@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-07-22ARM: dts: socfpga: Align L2 cache-controller nodename with dtschemaKrzysztof Kozlowski2-2/+2
[ Upstream commit d7adfe5ffed9faa05f8926223086b101e14f700d ] Fix dtschema validator warnings like: l2-cache@fffff000: $nodename:0: 'l2-cache@fffff000' does not match '^(cache-controller|cpu)(@[0-9a-f,]+)*$' Fixes: 475dc86d08de ("arm: dts: socfpga: Add a base DTSI for Altera's Arria10 SOC") Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Dinh Nguyen <dinguyen@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-07-22ARM: dts: Fix dcan driver probe failed on am437x platformdillon min1-4/+10
[ Upstream commit 2a4117df9b436a0e4c79d211284ab2097bcd00dc ] Got following d_can probe errors with kernel 5.8-rc1 on am437x [ 10.730822] CAN device driver interface Starting Wait for Network to be Configured... [ OK ] Reached target Network. [ 10.787363] c_can_platform 481cc000.can: probe failed [ 10.792484] c_can_platform: probe of 481cc000.can failed with error -2 [ 10.799457] c_can_platform 481d0000.can: probe failed [ 10.804617] c_can_platform: probe of 481d0000.can failed with error -2 actually, Tony has fixed this issue on am335x with the patch [3] Since am437x has the same clock structure with am335x [1][2], so reuse the code from Tony Lindgren's patch [3] to fix it. [1]: https://www.ti.com/lit/pdf/spruh73 Chapter-23, Figure 23-1. DCAN Integration [2]: https://www.ti.com/lit/pdf/spruhl7 Chapter-25, Figure 25-1. DCAN Integration [3]: commit 516f1117d0fb ("ARM: dts: Configure osc clock for d_can on am335x") Fixes: 1a5cd7c23cc5 ("bus: ti-sysc: Enable all clocks directly during init to read revision") Signed-off-by: dillon min <dillon.minfei@gmail.com> [tony@atomide.com: aligned commit message a bit for readability] Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-07-22arm64: dts: meson-gxl-s805x: reduce initial Mali450 core frequencyNeil Armstrong3-2/+26
[ Upstream commit b2037dafcf082cd24b88ae9283af628235df36e1 ] When starting at 744MHz, the Mali 450 core crashes on S805X based boards: lima d00c0000.gpu: IRQ ppmmu3 not found lima d00c0000.gpu: IRQ ppmmu4 not found lima d00c0000.gpu: IRQ ppmmu5 not found lima d00c0000.gpu: IRQ ppmmu6 not found lima d00c0000.gpu: IRQ ppmmu7 not found Internal error: synchronous external abort: 96000210 [#1] PREEMPT SMP Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.7.2+ #492 Hardware name: Libre Computer AML-S805X-AC (DT) pstate: 40000005 (nZcv daif -PAN -UAO) pc : lima_gp_init+0x28/0x188 ... Call trace: lima_gp_init+0x28/0x188 lima_device_init+0x334/0x534 lima_pdev_probe+0xa4/0xe4 ... Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b Reverting to a safer 666Mhz frequency on the S805X that doesn't use the GP0 PLL makes it more stable. Fixes: fd47716479f5 ("ARM64: dts: add S805X based P241 board") Fixes: 0449b8e371ac ("arm64: dts: meson: add libretech aml-s805x-ac board") Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Link: https://lore.kernel.org/r/20200618132737.14243-1-narmstrong@baylibre.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-07-22arm64: dts: meson: add missing gxl rng clockJerome Brunet1-0/+5
[ Upstream commit 95ca6f06dd4827ff63be5154120c7a8511cd9a41 ] The peripheral clock of the RNG is missing for gxl while it is present for gxbb. Fixes: 1b3f6d148692 ("ARM64: dts: meson-gx: add clock CLKID_RNG0 to hwrng node") Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lore.kernel.org/r/20200617125346.1163527-1-jbrunet@baylibre.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-07-22arm64: dts: g12-common: add parkmode_disable_ss_quirk on DWC3 controllerNeil Armstrong1-0/+1
[ Upstream commit a81bcfb6ac20cdd2e8dec3da14c8bbe1d18f6321 ] When high load on the DWC3 SuperSpeed port, the controller crashes with: [ 221.141621] xhci-hcd xhci-hcd.0.auto: xHCI host not responding to stop endpoint command. [ 221.157631] xhci-hcd xhci-hcd.0.auto: Host halt failed, -110 [ 221.157635] xhci-hcd xhci-hcd.0.auto: xHCI host controller not responding, assume dead [ 221.159901] xhci-hcd xhci-hcd.0.auto: xHCI host not responding to stop endpoint command. [ 221.159961] hub 2-1.1:1.0: hub_ext_port_status failed (err = -22) [ 221.160076] xhci-hcd xhci-hcd.0.auto: HC died; cleaning up [ 221.165946] usb 2-1.1-port1: cannot reset (err = -22) Setting the parkmode_disable_ss_quirk quirk fixes the issue. Reported-by: Tim <elatllat@gmail.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Cc: Jianxin Pan <jianxin.pan@amlogic.com> CC: Dongjin Kim <tobetter@gmail.com> Link: https://lore.kernel.org/r/20200221091532.8142-4-narmstrong@baylibre.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-07-22scsi: sr: remove references to BLK_DEV_SR_VENDOR, leave it enabledDiego Elio Pettenò43-43/+0
[ Upstream commit 679b2ec8e060ca7a90441aff5e7d384720a41b76 ] This kernel configuration is basically enabling/disabling sr driver quirks detection. While these quirks are for fairly rare devices (very old CD burners, and a glucometer), the additional detection of these models is a very minimal amount of code. The logic behind the quirks is always built into the sr driver. This also removes the config from all the defconfig files that are enabling this already. Link: https://lore.kernel.org/r/20200223191144.726-1-flameeyes@flameeyes.com Reviewed-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Diego Elio Pettenò <flameeyes@flameeyes.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-07-22ARM: at91: pm: add quirk for sam9x60's ulp1Claudiu Beznea1-0/+4
[ Upstream commit bb1a0e87e1c54cd884e9b92b1cec06b186edc7a0 ] On SAM9X60 2 nop operations has to be introduced after setting WAITMODE bit in CKGR_MOR. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/1579522208-19523-9-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-07-22ARM: OMAP2+: use separate IOMMU pdata to fix DRA7 IPU1 bootSuman Anna1-0/+21
[ Upstream commit 4601832f40501efc3c2fd264a5a69bd1ac17d520 ] The IPU1 MMU has been using common IOMMU pdata quirks defined and used by all IPU IOMMU devices on OMAP4 and beyond. Separate out the pdata for IPU1 MMU with the additional .set_pwrdm_constraint ops plugged in, so that the IPU1 power domain can be restricted to ON state during the boot and active period of the IPU1 remote processor. This eliminates the pre-conditions for the IPU1 boot issue as described in commit afe518400bdb ("iommu/omap: fix boot issue on remoteprocs with AMMU/Unicache"). NOTE: 1. RET is not a valid target power domain state on DRA7 platforms, and IPU power domain is normally programmed for OFF. The IPU1 still fails to boot though, and an unclearable l3_noc error is thrown currently on 4.14 kernel without this fix. This behavior is slightly different from previous 4.9 LTS kernel. 2. The fix is currently applied only to IPU1 on DRA7xx SoC, as the other affected processors on OMAP4/OMAP5/DRA7 are in domains that are not entering RET. IPU2 on DRA7 is in CORE power domain which is only programmed for ON power state. The fix can be easily scaled if these domains do hit RET in the future. 3. The issue was not seen on current DRA7 platforms if any of the DSP remote processors were booted and using one of the GPTimers 5, 6, 7 or 8 on previous 4.9 LTS kernel. This was due to the errata fix for i874 implemented in commit 1cbabcb9807e ("ARM: DRA7: clockdomain: Implement timer workaround for errata i874") which keeps the IPU1 power domain from entering RET when the timers are active. But the timer workaround did not make any difference on 4.14 kernel, and an l3_noc error was seen still without this fix. Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-07-22ARM: OMAP2+: Add workaround for DRA7 DSP MStandby errata i879Suman Anna1-3/+40
[ Upstream commit 2f14101a1d760db72393910d481fbf7768c44530 ] Errata Title: i879: DSP MStandby requires CD_EMU in SW_WKUP Description: The DSP requires the internal emulation clock to be actively toggling in order to successfully enter a low power mode via execution of the IDLE instruction and PRCM MStandby/Idle handshake. This assumes that other prerequisites and software sequence are followed. Workaround: The emulation clock to the DSP is free-running anytime CCS is connected via JTAG debugger to the DSP subsystem or when the CD_EMU clock domain is set in SW_WKUP mode. The CD_EMU domain can be set in SW_WKUP mode via the CM_EMU_CLKSTCTRL [1:0]CLKTRCTRL field. Implementation: This patch implements this workaround by denying the HW_AUTO mode for the EMU clockdomain during the power-up of any DSP processor and re-enabling the HW_AUTO mode during the shutdown of the last DSP processor (actually done during the enabling and disabling of the respective DSP MDMA MMUs). Reference counting has to be used to manage the independent sequencing between the multiple DSP processors. This switching is done at runtime rather than a static clockdomain flags value to meet the target power domain state for the EMU power domain during suspend. Note that the DSP MStandby behavior is not consistent across all boards prior to this fix. Please see commit 45f871eec6c0 ("ARM: OMAP2+: Extend DRA7 IPU1 MMU pdata quirks to DSP MDMA MMUs") for details. Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-07-22ARM: OMAP4+: remove pdata quirks for omap4+ iommusTero Kristo1-14/+0
[ Upstream commit e4c4b540e1e6c21ff8b987e92b2bd170ee006a94 ] IOMMU driver will be using ti-sysc bus driver for power management control going forward, and the pdata quirks are not needed for anything anymore. Signed-off-by: Tero Kristo <t-kristo@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-07-22arm64/alternatives: don't patch up internal branchesArd Biesheuvel1-14/+2
[ Upstream commit 5679b28142193a62f6af93249c0477be9f0c669b ] Commit f7b93d42945c ("arm64/alternatives: use subsections for replacement sequences") moved the alternatives replacement sequences into subsections, in order to keep the as close as possible to the code that they replace. Unfortunately, this broke the logic in branch_insn_requires_update, which assumed that any branch into kernel executable code was a branch that required updating, which is no longer the case now that the code sequences that are patched in are in the same section as the patch site itself. So the only way to discriminate branches that require updating and ones that don't is to check whether the branch targets the replacement sequence itself, and so we can drop the call to kernel_text_address() entirely. Fixes: f7b93d42945c ("arm64/alternatives: use subsections for replacement sequences") Reported-by: Alexandru Elisei <alexandru.elisei@arm.com> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Tested-by: Alexandru Elisei <alexandru.elisei@arm.com> Link: https://lore.kernel.org/r/20200709125953.30918-1-ardb@kernel.org Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-07-22arm64/alternatives: use subsections for replacement sequencesArd Biesheuvel2-11/+8
[ Upstream commit f7b93d42945cc71e1346dd5ae07c59061d56745e ] When building very large kernels, the logic that emits replacement sequences for alternatives fails when relative branches are present in the code that is emitted into the .altinstr_replacement section and patched in at the original site and fixed up. The reason is that the linker will insert veneers if relative branches go out of range, and due to the relative distance of the .altinstr_replacement from the .text section where its branch targets usually live, veneers may be emitted at the end of the .altinstr_replacement section, with the relative branches in the sequence pointed at the veneers instead of the actual target. The alternatives patching logic will attempt to fix up the branch to point to its original target, which will be the veneer in this case, but given that the patch site is likely to be far away as well, it will be out of range and so patching will fail. There are other cases where these veneers are problematic, e.g., when the target of the branch is in .text while the patch site is in .init.text, in which case putting the replacement sequence inside .text may not help either. So let's use subsections to emit the replacement code as closely as possible to the patch site, to ensure that veneers are only likely to be emitted if they are required at the patch site as well, in which case they will be in range for the replacement sequence both before and after it is transported to the patch site. This will prevent alternative sequences in non-init code from being released from memory after boot, but this is tolerable given that the entire section is only 512 KB on an allyesconfig build (which weighs in at 500+ MB for the entire Image). Also, note that modules today carry the replacement sequences in non-init sections as well, and any of those that target init code will be emitted into init sections after this change. This fixes an early crash when booting an allyesconfig kernel on a system where any of the alternatives sequences containing relative branches are activated at boot (e.g., ARM64_HAS_PAN on TX2) Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Cc: Suzuki K Poulose <suzuki.poulose@arm.com> Cc: James Morse <james.morse@arm.com> Cc: Andre Przywara <andre.przywara@arm.com> Cc: Dave P Martin <dave.martin@arm.com> Link: https://lore.kernel.org/r/20200630081921.13443-1-ardb@kernel.org Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-07-22m68k: mm: fix node memblock initAngelo Dureghello1-1/+1
[ Upstream commit c43e55796dd4d13f4855971a4d7970ce2cd94db4 ] After pulling 5.7.0 (linux-next merge), mcf5441x mmu boot was hanging silently. memblock_add() seems not appropriate, since using MAX_NUMNODES as node id, while memblock_add_node() sets up memory for node id 0. Signed-off-by: Angelo Dureghello <angelo.dureghello@timesys.com> Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Greg Ungerer <gerg@linux-m68k.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-07-22m68k: nommu: register start of the memory with memblockMike Rapoport1-1/+2
[ Upstream commit d63bd8c81d8ab64db506ffde569cc8ff197516e2 ] The m68k nommu setup code didn't register the beginning of the physical memory with memblock because it was anyway occupied by the kernel. However, commit fa3354e4ea39 ("mm: free_area_init: use maximal zone PFNs rather than zone sizes") changed zones initialization to use memblock.memory to detect the zone extents and this caused inconsistency between zone PFNs and the actual PFNs: BUG: Bad page state in process swapper pfn:20165 page:41fe0ca0 refcount:0 mapcount:1 mapping:00000000 index:0x0 flags: 0x0() raw: 00000000 00000100 00000122 00000000 00000000 00000000 00000000 00000000 page dumped because: nonzero mapcount CPU: 0 PID: 1 Comm: swapper Not tainted 5.8.0-rc1-00001-g3a38f8a60c65-dirty #1 Stack from 404c9ebc: 404c9ebc 4029ab28 4029ab28 40088470 41fe0ca0 40299e21 40299df1 404ba2a4 00020165 00000000 41fd2c10 402c7ba0 41fd2c04 40088504 41fe0ca0 40299e21 00000000 40088a12 41fe0ca0 41fe0ca4 0000020a 00000000 00000001 402ca000 00000000 41fe0ca0 41fd2c10 41fd2c10 00000000 00000000 402b2388 00000001 400a0934 40091056 404c9f44 404c9f44 40088db4 402c7ba0 00000001 41fd2c04 41fe0ca0 41fd2000 41fe0ca0 40089e02 4026ecf4 40089e4e 41fe0ca0 ffffffff Call Trace: [<40088470>] 0x40088470 [<40088504>] 0x40088504 [<40088a12>] 0x40088a12 [<402ca000>] 0x402ca000 [<400a0934>] 0x400a0934 Adjust the memory registration with memblock to include the beginning of the physical memory and make sure that the area occupied by the kernel is marked as reserved. Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Greg Ungerer <gerg@linux-m68k.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-07-22x86/fpu: Reset MXCSR to default in kernel_fpu_begin()Petteri Aimonen2-0/+11
[ Upstream commit 7ad816762f9bf89e940e618ea40c43138b479e10 ] Previously, kernel floating point code would run with the MXCSR control register value last set by userland code by the thread that was active on the CPU core just before kernel call. This could affect calculation results if rounding mode was changed, or a crash if a FPU/SIMD exception was unmasked. Restore MXCSR to the kernel's default value. [ bp: Carve out from a bigger patch by Petteri, add feature check, add FNINIT call too (amluto). ] Signed-off-by: Petteri Aimonen <jpa@git.mail.kapsi.fi> Signed-off-by: Borislav Petkov <bp@suse.de> Link: https://bugzilla.kernel.org/show_bug.cgi?id=207979 Link: https://lkml.kernel.org/r/20200624114646.28953-2-bp@alien8.de Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-07-22arm64: arch_timer: Allow an workaround descriptor to disable compat vdsoMarc Zyngier1-0/+1
commit c1fbec4ac0d701f350a581941d35643d5a9cd184 upstream. As we are about to disable the vdso for compat tasks in some circumstances, let's allow a workaround descriptor to express exactly that. Signed-off-by: Marc Zyngier <maz@kernel.org> Acked-by: Mark Rutland <mark.rutland@arm.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200706163802.1836732-3-maz@kernel.org Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-22arm64: Introduce a way to disable the 32bit vdsoMarc Zyngier7-10/+37
commit 97884ca8c2925d14c32188e865069f21378b4b4f upstream. [this is a redesign rather than a backport] We have a class of errata (grouped under the ARM64_WORKAROUND_1418040 banner) that force the trapping of counter access from 32bit EL0. We would normally disable the whole vdso for such defect, except that it would disable it for 64bit userspace as well, which is a shame. Instead, add a new vdso_clock_mode, which signals that the vdso isn't usable for compat tasks. This gets checked in the new vdso_clocksource_ok() helper, now provided for the 32bit vdso. Signed-off-by: Marc Zyngier <maz@kernel.org> Acked-by: Mark Rutland <mark.rutland@arm.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200706163802.1836732-2-maz@kernel.org Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-16s390/maccess: add no DAT mode to kernel_writeVasily Gorbik1-5/+9
[ Upstream commit d6df52e9996dcc2062c3d9c9123288468bb95b52 ] To be able to patch kernel code before paging is initialized do plain memcpy if DAT is off. This is required to enable early jump label initialization. Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-07-16s390: Change s390_kernel_write() return type to match memcpy()Josh Poimboeuf2-4/+7
[ Upstream commit cb2cceaefb4c4dc28fc27ff1f1b2d258bfc10353 ] s390_kernel_write()'s function type is almost identical to memcpy(). Change its return type to "void *" so they can be used interchangeably. Cc: linux-s390@vger.kernel.org Cc: heiko.carstens@de.ibm.com Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Acked-by: Joe Lawrence <joe.lawrence@redhat.com> Acked-by: Miroslav Benes <mbenes@suse.cz> Acked-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> # s390 Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-07-16s390/mm: fix huge pte soft dirty copyingJanosch Frank1-1/+1
commit 528a9539348a0234375dfaa1ca5dbbb2f8f8e8d2 upstream. If the pmd is soft dirty we must mark the pte as soft dirty (and not dirty). This fixes some cases for guest migration with huge page backings. Cc: <stable@vger.kernel.org> # 4.8 Fixes: bc29b7ac1d9f ("s390/mm: clean up pte/pmd encoding") Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Janosch Frank <frankja@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-16s390/setup: init jump labels before command line parsingVasily Gorbik1-0/+1
commit 95e61b1b5d6394b53d147c0fcbe2ae70fbe09446 upstream. Command line parameters might set static keys. This is true for s390 at least since commit 6471384af2a6 ("mm: security: introduce init_on_alloc=1 and init_on_free=1 boot options"). To avoid the following WARN: static_key_enable_cpuslocked(): static key 'init_on_alloc+0x0/0x40' used before call to jump_label_init() call jump_label_init() just before parse_early_param(). jump_label_init() is safe to call multiple times (x86 does that), doesn't do any memory allocations and hence should be safe to call that early. Fixes: 6471384af2a6 ("mm: security: introduce init_on_alloc=1 and init_on_free=1 boot options") Cc: <stable@vger.kernel.org> # 5.3: d6df52e9996d: s390/maccess: add no DAT mode to kernel_write Cc: <stable@vger.kernel.org> # 5.3 Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-16ARC: elf: use right ELF_ARCHVineet Gupta1-1/+1
commit b7faf971081a4e56147f082234bfff55135305cb upstream. Cc: <stable@vger.kernel.org> Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-16ARC: entry: fix potential EFA clobber when TIF_SYSCALL_TRACEVineet Gupta1-11/+5
commit 00fdec98d9881bf5173af09aebd353ab3b9ac729 upstream. Trap handler for syscall tracing reads EFA (Exception Fault Address), in case strace wants PC of trap instruction (EFA is not part of pt_regs as of current code). However this EFA read is racy as it happens after dropping to pure kernel mode (re-enabling interrupts). A taken interrupt could context-switch, trigger a different task's trap, clobbering EFA for this execution context. Fix this by reading EFA early, before re-enabling interrupts. A slight side benefit is de-duplication of FAKE_RET_FROM_EXCPN in trap handler. The trap handler is common to both ARCompact and ARCv2 builds too. This just came out of code rework/review and no real problem was reported but is clearly a potential problem specially for strace. Cc: <stable@vger.kernel.org> Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-16KVM: arm64: Fix kvm_reset_vcpu() return code being incorrect with SVESteven Price1-3/+7
If SVE is enabled then 'ret' can be assigned the return value of kvm_vcpu_enable_sve() which may be 0 causing future "goto out" sites to erroneously return 0 on failure rather than -EINVAL as expected. Remove the initialisation of 'ret' and make setting the return value explicit to avoid this situation in the future. Fixes: 9a3cdf26e336 ("KVM: arm64/sve: Allow userspace to enable SVE for vcpus") Cc: stable@vger.kernel.org Reported-by: James Morse <james.morse@arm.com> Signed-off-by: Steven Price <steven.price@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20200617105456.28245-1-steven.price@arm.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-07-16KVM: x86: Mark CR4.TSD as being possibly owned by the guestSean Christopherson2-1/+3
commit 7c83d096aed055a7763a03384f92115363448b71 upstream. Mark CR4.TSD as being possibly owned by the guest as that is indeed the case on VMX. Without TSD being tagged as possibly owned by the guest, a targeted read of CR4 to get TSD could observe a stale value. This bug is benign in the current code base as the sole consumer of TSD is the emulator (for RDTSC) and the emulator always "reads" the entirety of CR4 when grabbing bits. Add a build-time assertion in to ensure VMX doesn't hand over more CR4 bits without also updating x86. Fixes: 52ce3c21aec3 ("x86,kvm,vmx: Don't trap writes to CR4.TSD") Cc: stable@vger.kernel.org Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Message-Id: <20200703040422.31536-2-sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-16KVM: x86: Inject #GP if guest attempts to toggle CR4.LA57 in 64-bit modeSean Christopherson1-0/+2
commit d74fcfc1f0ff4b6c26ecef1f9e48d8089ab4eaac upstream. Inject a #GP on MOV CR4 if CR4.LA57 is toggled in 64-bit mode, which is illegal per Intel's SDM: CR4.LA57 57-bit linear addresses (bit 12 of CR4) ... blah blah blah ... This bit cannot be modified in IA-32e mode. Note, the pseudocode for MOV CR doesn't call out the fault condition, which is likely why the check was missed during initial development. This is arguably an SDM bug and will hopefully be fixed in future release of the SDM. Fixes: fd8cb433734ee ("KVM: MMU: Expose the LA57 feature to VM.") Cc: stable@vger.kernel.org Reported-by: Sebastien Boeuf <sebastien.boeuf@intel.com> Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Message-Id: <20200703021714.5549-1-sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-16KVM: x86: bit 8 of non-leaf PDPEs is not reservedPaolo Bonzini1-1/+1
commit 5ecad245de2ae23dc4e2dbece92f8ccfbaed2fa7 upstream. Bit 8 would be the "global" bit, which does not quite make sense for non-leaf page table entries. Intel ignores it; AMD ignores it in PDEs and PDPEs, but reserves it in PML4Es. Probably, earlier versions of the AMD manual documented it as reserved in PDPEs as well, and that behavior made it into KVM as well as kvm-unit-tests; fix it. Cc: stable@vger.kernel.org Reported-by: Nadav Amit <namit@vmware.com> Fixes: a0c0feb57992 ("KVM: x86: reserve bit 8 of non-leaf PDPEs and PML4Es in 64-bit mode on AMD", 2014-09-03) Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-16KVM: arm64: Annotate hyp NMI-related functions as __always_inlineAlexandru Elisei2-2/+2
commit 7733306bd593c737c63110175da6c35b4b8bb32c upstream. The "inline" keyword is a hint for the compiler to inline a function. The functions system_uses_irq_prio_masking() and gic_write_pmr() are used by the code running at EL2 on a non-VHE system, so mark them as __always_inline to make sure they'll always be part of the .hyp.text section. This fixes the following splat when trying to run a VM: [ 47.625273] Kernel panic - not syncing: HYP panic: [ 47.625273] PS:a00003c9 PC:0000ca0b42049fc4 ESR:86000006 [ 47.625273] FAR:0000ca0b42049fc4 HPFAR:0000000010001000 PAR:0000000000000000 [ 47.625273] VCPU:0000000000000000 [ 47.647261] CPU: 1 PID: 217 Comm: kvm-vcpu-0 Not tainted 5.8.0-rc1-ARCH+ #61 [ 47.654508] Hardware name: Globalscale Marvell ESPRESSOBin Board (DT) [ 47.661139] Call trace: [ 47.663659] dump_backtrace+0x0/0x1cc [ 47.667413] show_stack+0x18/0x24 [ 47.670822] dump_stack+0xb8/0x108 [ 47.674312] panic+0x124/0x2f4 [ 47.677446] panic+0x0/0x2f4 [ 47.680407] SMP: stopping secondary CPUs [ 47.684439] Kernel Offset: disabled [ 47.688018] CPU features: 0x240402,20002008 [ 47.692318] Memory Limit: none [ 47.695465] ---[ end Kernel panic - not syncing: HYP panic: [ 47.695465] PS:a00003c9 PC:0000ca0b42049fc4 ESR:86000006 [ 47.695465] FAR:0000ca0b42049fc4 HPFAR:0000000010001000 PAR:0000000000000000 [ 47.695465] VCPU:0000000000000000 ]--- The instruction abort was caused by the code running at EL2 trying to fetch an instruction which wasn't mapped in the EL2 translation tables. Using objdump showed the two functions as separate symbols in the .text section. Fixes: 85738e05dc38 ("arm64: kvm: Unmask PMR before entering guest") Cc: stable@vger.kernel.org Signed-off-by: Alexandru Elisei <alexandru.elisei@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Acked-by: James Morse <james.morse@arm.com> Link: https://lore.kernel.org/r/20200618171254.1596055-1-alexandru.elisei@arm.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-16KVM: arm64: Stop clobbering x0 for HVC_SOFT_RESTARTAndrew Scull1-4/+7
commit b9e10d4a6c9f5cbe6369ce2c17ebc67d2e5a4be5 upstream. HVC_SOFT_RESTART is given values for x0-2 that it should installed before exiting to the new address so should not set x0 to stub HVC success or failure code. Fixes: af42f20480bf1 ("arm64: hyp-stub: Zero x0 on successful stub handling") Cc: stable@vger.kernel.org Signed-off-by: Andrew Scull <ascull@google.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20200706095259.1338221-1-ascull@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-16KVM: arm64: Fix definition of PAGE_HYP_DEVICEWill Deacon1-1/+1
commit 68cf617309b5f6f3a651165f49f20af1494753ae upstream. PAGE_HYP_DEVICE is intended to encode attribute bits for an EL2 stage-1 pte mapping a device. Unfortunately, it includes PROT_DEVICE_nGnRE which encodes attributes for EL1 stage-1 mappings such as UXN and nG, which are RES0 for EL2, and DBM which is meaningless as TCR_EL2.HD is not set. Fix the definition of PAGE_HYP_DEVICE so that it doesn't set RES0 bits at EL2. Acked-by: Marc Zyngier <maz@kernel.org> Cc: Marc Zyngier <maz@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: James Morse <james.morse@arm.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200708162546.26176-1-will@kernel.org Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-16arm64: kgdb: Fix single-step exception handling oopsWei Li1-1/+1
[ Upstream commit 8523c006264df65aac7d77284cc69aac46a6f842 ] After entering kdb due to breakpoint, when we execute 'ss' or 'go' (will delay installing breakpoints, do single-step first), it won't work correctly, and it will enter kdb due to oops. It's because the reason gotten in kdb_stub() is not as expected, and it seems that the ex_vector for single-step should be 0, like what arch powerpc/sh/parisc has implemented. Before the patch: Entering kdb (current=0xffff8000119e2dc0, pid 0) on processor 0 due to Keyboard Entry [0]kdb> bp printk Instruction(i) BP #0 at 0xffff8000101486cc (printk) is enabled addr at ffff8000101486cc, hardtype=0 installed=0 [0]kdb> g / # echo h > /proc/sysrq-trigger Entering kdb (current=0xffff0000fa878040, pid 266) on processor 3 due to Breakpoint @ 0xffff8000101486cc [3]kdb> ss Entering kdb (current=0xffff0000fa878040, pid 266) on processor 3 Oops: (null) due to oops @ 0xffff800010082ab8 CPU: 3 PID: 266 Comm: sh Not tainted 5.7.0-rc4-13839-gf0e5ad491718 #6 Hardware name: linux,dummy-virt (DT) pstate: 00000085 (nzcv daIf -PAN -UAO) pc : el1_irq+0x78/0x180 lr : __handle_sysrq+0x80/0x190 sp : ffff800015003bf0 x29: ffff800015003d20 x28: ffff0000fa878040 x27: 0000000000000000 x26: ffff80001126b1f0 x25: ffff800011b6a0d8 x24: 0000000000000000 x23: 0000000080200005 x22: ffff8000101486cc x21: ffff800015003d30 x20: 0000ffffffffffff x19: ffff8000119f2000 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000 x8 : ffff800015003e50 x7 : 0000000000000002 x6 : 00000000380b9990 x5 : ffff8000106e99e8 x4 : ffff0000fadd83c0 x3 : 0000ffffffffffff x2 : ffff800011b6a0d8 x1 : ffff800011b6a000 x0 : ffff80001130c9d8 Call trace: el1_irq+0x78/0x180 printk+0x0/0x84 write_sysrq_trigger+0xb0/0x118 proc_reg_write+0xb4/0xe0 __vfs_write+0x18/0x40 vfs_write+0xb0/0x1b8 ksys_write+0x64/0xf0 __arm64_sys_write+0x14/0x20 el0_svc_common.constprop.2+0xb0/0x168 do_el0_svc+0x20/0x98 el0_sync_handler+0xec/0x1a8 el0_sync+0x140/0x180 [3]kdb> After the patch: Entering kdb (current=0xffff8000119e2dc0, pid 0) on processor 0 due to Keyboard Entry [0]kdb> bp printk Instruction(i) BP #0 at 0xffff8000101486cc (printk) is enabled addr at ffff8000101486cc, hardtype=0 installed=0 [0]kdb> g / # echo h > /proc/sysrq-trigger Entering kdb (current=0xffff0000fa852bc0, pid 268) on processor 0 due to Breakpoint @ 0xffff8000101486cc [0]kdb> g Entering kdb (current=0xffff0000fa852bc0, pid 268) on processor 0 due to Breakpoint @ 0xffff8000101486cc [0]kdb> ss Entering kdb (current=0xffff0000fa852bc0, pid 268) on processor 0 due to SS trap @ 0xffff800010082ab8 [0]kdb> Fixes: 44679a4f142b ("arm64: KGDB: Add step debugging support") Signed-off-by: Wei Li <liwei391@huawei.com> Tested-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20200509214159.19680-2-liwei391@huawei.com Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-07-16x86/entry: Increase entry_stack size to a full pagePeter Zijlstra1-1/+1
[ Upstream commit c7aadc09321d8f9a1d3bd1e6d8a47222ecddf6c5 ] Marco crashed in bad_iret with a Clang11/KCSAN build due to overflowing the stack. Now that we run C code on it, expand it to a full page. Suggested-by: Andy Lutomirski <luto@amacapital.net> Reported-by: Marco Elver <elver@google.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Lai Jiangshan <jiangshanlai@gmail.com> Tested-by: Marco Elver <elver@google.com> Link: https://lkml.kernel.org/r/20200618144801.819246178@infradead.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-07-16ARM: imx6: add missing put_device() call in imx6q_suspend_init()yu kuai1-4/+6
[ Upstream commit 4845446036fc9c13f43b54a65c9b757c14f5141b ] if of_find_device_by_node() succeed, imx6q_suspend_init() doesn't have a corresponding put_device(). Thus add a jump target to fix the exception handling for this function implementation. Signed-off-by: yu kuai <yukuai3@huawei.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-07-16s390/kasan: fix early pgm check handler executionVasily Gorbik1-0/+2
[ Upstream commit 998f5bbe3dbdab81c1cfb1aef7c3892f5d24f6c7 ] Currently if early_pgm_check_handler is called it ends up in pgm check loop. The problem is that early_pgm_check_handler is instrumented by KASAN but executed without DAT flag enabled which leads to addressing exception when KASAN checks try to access shadow memory. Fix that by executing early handlers with DAT flag on under KASAN as expected. Reported-and-tested-by: Alexander Egorenkov <egorenar@linux.ibm.com> Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-07-16powerpc/kvm/book3s64: Fix kernel crash with nested kvm & DEBUG_VIRTUALAneesh Kumar K.V1-1/+2
[ Upstream commit c1ed1754f271f6b7acb1bfdc8cfb62220fbed423 ] With CONFIG_DEBUG_VIRTUAL=y, __pa() checks for addr value and if it's less than PAGE_OFFSET it leads to a BUG(). #define __pa(x) ({ VIRTUAL_BUG_ON((unsigned long)(x) < PAGE_OFFSET); (unsigned long)(x) & 0x0fffffffffffffffUL; }) kernel BUG at arch/powerpc/kvm/book3s_64_mmu_radix.c:43! cpu 0x70: Vector: 700 (Program Check) at [c0000018a2187360] pc: c000000000161b30: __kvmhv_copy_tofrom_guest_radix+0x130/0x1f0 lr: c000000000161d5c: kvmhv_copy_from_guest_radix+0x3c/0x80 ... kvmhv_copy_from_guest_radix+0x3c/0x80 kvmhv_load_from_eaddr+0x48/0xc0 kvmppc_ld+0x98/0x1e0 kvmppc_load_last_inst+0x50/0x90 kvmppc_hv_emulate_mmio+0x288/0x2b0 kvmppc_book3s_radix_page_fault+0xd8/0x2b0 kvmppc_book3s_hv_page_fault+0x37c/0x1050 kvmppc_vcpu_run_hv+0xbb8/0x1080 kvmppc_vcpu_run+0x34/0x50 kvm_arch_vcpu_ioctl_run+0x2fc/0x410 kvm_vcpu_ioctl+0x2b4/0x8f0 ksys_ioctl+0xf4/0x150 sys_ioctl+0x28/0x80 system_call_exception+0x104/0x1d0 system_call_common+0xe8/0x214 kvmhv_copy_tofrom_guest_radix() uses a NULL value for to/from to indicate direction of copy. Avoid calling __pa() if the value is NULL to avoid the BUG(). Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> [mpe: Massage change log a bit to mention CONFIG_DEBUG_VIRTUAL] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200611120159.680284-1-aneesh.kumar@linux.ibm.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-07-16ARM: dts: omap4-droid4: Fix spi configuration and increase rateTony Lindgren1-1/+3
[ Upstream commit 0df12a01f4857495816b05f048c4c31439446e35 ] We can currently sometimes get "RXS timed out" errors and "EOT timed out" errors with spi transfers. These errors can be made easy to reproduce by reading the cpcap iio values in a loop while keeping the CPUs busy by also reading /dev/urandom. The "RXS timed out" errors we can fix by adding spi-cpol and spi-cpha in addition to the spi-cs-high property we already have. The "EOT timed out" errors we can fix by increasing the spi clock rate to 9.6 MHz. Looks similar MC13783 PMIC says it works at spi clock rates up to 20 MHz, so let's assume we can pick any rate up to 20 MHz also for cpcap. Cc: maemo-leste@lists.dyne.org Cc: Merlijn Wajer <merlijn@wizzup.org> Cc: Pavel Machek <pavel@ucw.cz> Cc: Sebastian Reichel <sre@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-07-16perf/x86/rapl: Fix RAPL config variable bugStephane Eranian1-1/+1
[ Upstream commit 16accae3d97f97d7f61c4ee5d0002bccdef59088 ] This patch fixes a bug introduced by: fd3ae1e1587d6 ("perf/x86/rapl: Move RAPL support to common x86 code") The Kconfig variable name was wrong. It was missing the CONFIG_ prefix. Signed-off-by: Stephane Eranian <eraniangoogle.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Tested-by: Kim Phillips <kim.phillips@amd.com> Acked-by: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20200528201614.250182-1-eranian@google.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-07-16perf/x86/rapl: Move RAPL support to common x86 codeStephane Eranian4-8/+10
[ Upstream commit fd3ae1e1587d64ef8cc8e361903d33625458073e ] To prepare for support of both Intel and AMD RAPL. As per the AMD PPR, Fam17h support Package RAPL counters to monitor power usage. The RAPL counter operates as with Intel RAPL, and as such it is beneficial to share the code. No change in functionality. Signed-off-by: Stephane Eranian <eranian@google.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lore.kernel.org/r/20200527224659.206129-2-eranian@google.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-07-16KVM: s390: reduce number of IO pins to 1Christian Borntraeger1-4/+4
[ Upstream commit 774911290c589e98e3638e73b24b0a4d4530e97c ] The current number of KVM_IRQCHIP_NUM_PINS results in an order 3 allocation (32kb) for each guest start/restart. This can result in OOM killer activity even with free swap when the memory is fragmented enough: kernel: qemu-system-s39 invoked oom-killer: gfp_mask=0x440dc0(GFP_KERNEL_ACCOUNT|__GFP_COMP|__GFP_ZERO), order=3, oom_score_adj=0 kernel: CPU: 1 PID: 357274 Comm: qemu-system-s39 Kdump: loaded Not tainted 5.4.0-29-generic #33-Ubuntu kernel: Hardware name: IBM 8562 T02 Z06 (LPAR) kernel: Call Trace: kernel: ([<00000001f848fe2a>] show_stack+0x7a/0xc0) kernel: [<00000001f8d3437a>] dump_stack+0x8a/0xc0 kernel: [<00000001f8687032>] dump_header+0x62/0x258 kernel: [<00000001f8686122>] oom_kill_process+0x172/0x180 kernel: [<00000001f8686abe>] out_of_memory+0xee/0x580 kernel: [<00000001f86e66b8>] __alloc_pages_slowpath+0xd18/0xe90 kernel: [<00000001f86e6ad4>] __alloc_pages_nodemask+0x2a4/0x320 kernel: [<00000001f86b1ab4>] kmalloc_order+0x34/0xb0 kernel: [<00000001f86b1b62>] kmalloc_order_trace+0x32/0xe0 kernel: [<00000001f84bb806>] kvm_set_irq_routing+0xa6/0x2e0 kernel: [<00000001f84c99a4>] kvm_arch_vm_ioctl+0x544/0x9e0 kernel: [<00000001f84b8936>] kvm_vm_ioctl+0x396/0x760 kernel: [<00000001f875df66>] do_vfs_ioctl+0x376/0x690 kernel: [<00000001f875e304>] ksys_ioctl+0x84/0xb0 kernel: [<00000001f875e39a>] __s390x_sys_ioctl+0x2a/0x40 kernel: [<00000001f8d55424>] system_call+0xd8/0x2c8 As far as I can tell s390x does not use the iopins as we bail our for anything other than KVM_IRQ_ROUTING_S390_ADAPTER and the chip/pin is only used for KVM_IRQ_ROUTING_IRQCHIP. So let us use a small number to reduce the memory footprint. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: David Hildenbrand <david@redhat.com> Link: https://lore.kernel.org/r/20200617083620.5409-1-borntraeger@de.ibm.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-07-09x86/resctrl: Fix memory bandwidth counter width for AMDBabu Moger3-1/+7
commit 2c18bd525c47f882f033b0a813ecd09c93e1ecdf upstream. Memory bandwidth is calculated reading the monitoring counter at two intervals and calculating the delta. It is the software’s responsibility to read the count often enough to avoid having the count roll over _twice_ between reads. The current code hardcodes the bandwidth monitoring counter's width to 24 bits for AMD. This is due to default base counter width which is 24. Currently, AMD does not implement the CPUID 0xF.[ECX=1]:EAX to adjust the counter width. But, the AMD hardware supports much wider bandwidth counter with the default width of 44 bits. Kernel reads these monitoring counters every 1 second and adjusts the counter value for overflow. With 24 bits and scale value of 64 for AMD, it can only measure up to 1GB/s without overflowing. For the rates above 1GB/s this will fail to measure the bandwidth. Fix the issue setting the default width to 44 bits by adjusting the offset. AMD future products will implement CPUID 0xF.[ECX=1]:EAX. [ bp: Let the line stick out and drop {}-brackets around a single statement. ] Fixes: 4d05bf71f157 ("x86/resctrl: Introduce AMD QOS feature") Signed-off-by: Babu Moger <babu.moger@amd.com> Signed-off-by: Borislav Petkov <bp@suse.de> Link: https://lkml.kernel.org/r/159129975546.62538.5656031125604254041.stgit@naples-babu.amd.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-03-15 08:12:03 +0300