summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)AuthorFilesLines
2015-12-21xen/arm: introduce HYPERVISOR_platform_op on arm and arm64Stefano Stabellini5-0/+12
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2015-12-21xen: rename dom0_op to platform_opStefano Stabellini4-9/+9
The dom0_op hypercall has been renamed to platform_op since Xen 3.2, which is ancient, and modern upstream Linux kernels cannot run as dom0 and it anymore anyway. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2015-12-21xen/arm: account for stolen ticksStefano Stabellini1-0/+19
Register the runstate_memory_area with the hypervisor. Use pv_time_ops.steal_clock to account for stolen ticks. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2015-12-21arm64: introduce CONFIG_PARAVIRT, PARAVIRT_TIME_ACCOUNTING and pv_time_opsStefano Stabellini4-0/+66
Introduce CONFIG_PARAVIRT and PARAVIRT_TIME_ACCOUNTING on ARM64. Necessary duplication of paravirt.h and paravirt.c with ARM. The only paravirt interface supported is pv_time_ops.steal_clock, so no runtime pvops patching needed. This allows us to make use of steal_account_process_tick for stolen ticks accounting. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com>
2015-12-21arm: introduce CONFIG_PARAVIRT, PARAVIRT_TIME_ACCOUNTING and pv_time_opsStefano Stabellini4-0/+66
Introduce CONFIG_PARAVIRT and PARAVIRT_TIME_ACCOUNTING on ARM. The only paravirt interface supported is pv_time_ops.steal_clock, so no runtime pvops patching needed. This allows us to make use of steal_account_process_tick for stolen ticks accounting. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Acked-by: Christopher Covington <cov@codeaurora.org> Acked-by: Ian Campbell <ian.campbell@citrix.com> Acked-by: Russell King <linux@arm.linux.org.uk>
2015-12-21xen: move xen_setup_runstate_info and get_runstate_snapshot to ↵Stefano Stabellini1-75/+1
drivers/xen/time.c Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Acked-by: Ian Campbell <ian.campbell@citrix.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2015-12-20Merge tag 'powerpc-4.4-5' of ↵Linus Torvalds4-26/+26
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: - Partial revert of "powerpc: Individual System V IPC system calls" - pr_warn_once on unsupported OPAL_MSG type from Stewart - Fix deadlock in opal-irqchip introduced by "Fix double endian conversion" from Alistair * tag 'powerpc-4.4-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/opal-irqchip: Fix deadlock introduced by "Fix double endian conversion" powerpc/powernv: pr_warn_once on unsupported OPAL_MSG type Partial revert of "powerpc: Individual System V IPC system calls"
2015-12-18Merge tag 'for-linus-4.4-rc5-tag' of ↵Linus Torvalds2-17/+12
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen bug fixes from David Vrabel: - XSA-155 security fixes to backend drivers. - XSA-157 security fixes to pciback. * tag 'for-linus-4.4-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen-pciback: fix up cleanup path when alloc fails xen/pciback: Don't allow MSI-X ops if PCI_COMMAND_MEMORY is not set. xen/pciback: For XEN_PCI_OP_disable_msi[|x] only disable if device has MSI(X) enabled. xen/pciback: Do not install an IRQ handler for MSI interrupts. xen/pciback: Return error on XEN_PCI_OP_enable_msix when device has MSI or MSI-X enabled xen/pciback: Return error on XEN_PCI_OP_enable_msi when device has MSI or MSI-X enabled xen/pciback: Save xen_pci_op commands before processing it xen-scsiback: safely copy requests xen-blkback: read from indirect descriptors only once xen-blkback: only read request operation from shared ring once xen-netback: use RING_COPY_REQUEST() throughout xen-netback: don't use last request to determine minimum Tx credit xen: Add RING_COPY_REQUEST() xen/x86/pvh: Use HVM's flush_tlb_others op xen: Resume PMU from non-atomic context xen/events/fifo: Consume unprocessed events when a CPU dies
2015-12-18Merge tag 'arc-fixes-for-4.4-rc6' of ↵Linus Torvalds14-68/+97
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc Pull ARC architecture fixes from Vineet Gupta: "Fixes for: - perf interrupts on SMP: Not enabled (at boot) and disabled (at runtime) - stack unwinder regression (for modules, ignoring dwarf3) - nsim hosed for non default kernel link base builds" * tag 'arc-fixes-for-4.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: ARC: smp: Rename platform hook @init_cpu_smp -> @init_per_cpu ARC: rename smp operation init_irq_cpu() to init_per_cpu() ARC: dw2 unwind: Ignore CIE version !=1 gracefully instead of bailing ARC: dw2 unwind: Reinstante unwinding out of modules ARC: [plat-sim] unbork non default CONFIG_LINUX_LINK_BASE ARC: intc: Document arc_request_percpu_irq() better ARCv2: perf: Ensure perf intr gets enabled on all cores ARC: intc: No need to clear IRQ_NOAUTOEN ARCv2: intc: Fix random perf irq disabling in SMP setup ARC: [axs10x] cap ethernet phy to 100 Mbit/sec
2015-12-18powerpc/opal-irqchip: Fix deadlock introduced by "Fix double endian conversion"Alistair Popple1-1/+13
Commit 25642e1459ac ("powerpc/opal-irqchip: Fix double endian conversion") fixed an endian bug by calling opal_handle_events() in opal_event_unmask(). However this introduced a deadlock if we find an event is active during unmasking and call opal_handle_events() again. The bad call sequence is: opal_interrupt() -> opal_handle_events() -> generic_handle_irq() -> handle_level_irq() -> raw_spin_lock(&desc->lock) handle_irq_event(desc) unmask_irq(desc) -> opal_event_unmask() -> opal_handle_events() -> generic_handle_irq() -> handle_level_irq() -> raw_spin_lock(&desc->lock) (BOOM) When generating multiple opal events in quick succession this would lead to the following stall warnings: EEH: Fenced PHB#0 detected, location: U78C9.001.WZS09XA-P1-C32 INFO: rcu_sched detected stalls on CPUs/tasks: 12-...: (1 GPs behind) idle=68f/140000000000001/0 softirq=860/861 fqs=2065 15-...: (1 GPs behind) idle=be5/140000000000001/0 softirq=1142/1143 fqs=2065 (detected by 13, t=2102 jiffies, g=1325, c=1324, q=602) NMI watchdog: BUG: soft lockup - CPU#18 stuck for 22s! [irqbalance:2696] INFO: rcu_sched detected stalls on CPUs/tasks: 12-...: (1 GPs behind) idle=68f/140000000000001/0 softirq=860/861 fqs=8371 15-...: (1 GPs behind) idle=be5/140000000000001/0 softirq=1142/1143 fqs=8371 (detected by 20, t=8407 jiffies, g=1325, c=1324, q=1290) This patch corrects the problem by queuing the work if an event is active during unmasking, which is similar to the pre-endian fix behaviour. Fixes: 25642e1459ac ("powerpc/opal-irqchip: Fix double endian conversion") Signed-off-by: Alistair Popple <alistair@popple.id.au> Reported-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-12-17Merge branch 'libnvdimm-fixes' of ↵Linus Torvalds2-2/+3
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull libnvdimm fixes from Dan Williams: - Two bug fixes for misuse of PAGE_MASK in scatterlist and dma-debug. These are tagged for -stable. The scatterlist impact is potentially corrupted dma addresses on HIGHMEM enabled platforms. - A minor locking fix for the NFIT hot-add implementation that is new in 4.4-rc. This would only trigger in the case a hot-add raced driver removal. * 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: dma-debug: Fix dma_debug_entry offset calculation Revert "scatterlist: use sg_phys()" nfit: acpi_nfit_notify(): Do not leave device locked
2015-12-17powerpc/powernv: pr_warn_once on unsupported OPAL_MSG typeStewart Smith1-1/+1
When running on newer OPAL firmware that supports sending extra OPAL_MSG types, we would print a warning on *every* message received. This could be a problem for kernels that don't support OPAL_MSG_OCC on machines that are running real close to thermal limits and the OCC is throttling the chip. For a kernel that is paying attention to the message queue, we could get these notifications quite often. Conceivably, future message types could also come fairly often, and printing that we didn't understand them 10,000 times provides no further information than printing them once. Cc: stable@vger.kernel.org Signed-off-by: Stewart Smith <stewart@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-12-17ARC: smp: Rename platform hook @init_cpu_smp -> @init_per_cpuVineet Gupta3-6/+6
Makes it similar to smp_ops which also has callback with same name Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2015-12-17ARC: rename smp operation init_irq_cpu() to init_per_cpu()Noam Camus4-7/+7
This will better reflect its description i.e. "any needed setup..." and not just do an "IPI request". Signed-off-by: Noam Camus <noamc@ezchip.com> Acked-by: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2015-12-17ARC: dw2 unwind: Ignore CIE version !=1 gracefully instead of bailingVineet Gupta1-4/+9
ARC dwarf unwinder only supports CIE version == 1 The boot time dwarf sanitizer (part of binary lookup table constructor) would simply bail if it saw CIE version == 3, rendering unwinder with a NULL lookup table. It seems libgcc linked with kernel does have such entries. With fallback linear search removed, and a NULL binary lookup table, unwinder fails to generate any stack trace. So allow graceful ignoring of unsupported CIE entries. This problem was initially seen in Alexey's setup (and not mine) as he was using buildroot built toolchain (libgcc) which doesn't get built with CFLAGS_FOR_TARGET="-gdwarf-2 which is my default Fixes STAR 9000985048: "kernel unwinder broken with stock tools" Fixes: 2e22502c080f ARC: dw2 unwind: Remove falllback linear search thru FDE entries Reported-by Alexey Brodkin <abrodkin@synopsys.com> Cc: <stable@vger.kernel.org> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2015-12-17ARC: dw2 unwind: Reinstante unwinding out of modulesVineet Gupta3-19/+26
The fix which removed linear searching of dwarf (because binary lookup data always exists) missed out on the fact that modules don't get the binary lookup tables info. This caused unwinding out of modules to stop working. So add binary lookup header setup (equivalent of eh_frame_hdr setup) to modules as well. While at it, confine the header setup to within unwinder code, reducing one API exposed out of unwinder code. Fixes: 2e22502c080f ARC: dw2 unwind: Remove falllback linear search thru FDE entries Cc: <stable@vger.kernel.org> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2015-12-17ARC: [plat-sim] unbork non default CONFIG_LINUX_LINK_BASEVineet Gupta3-2/+6
HIGHMEM support bumped the default memory size for nsim platform to 1G. Thus total memory ended at the very edge of start of peripherals address space. With linux link base shifted, memory started bleeding into peripheral space which caused early boot bad_page spew ! Fixes: 29e332261d2 ("ARC: mm: HIGHMEM: populate high memory from DT") Reported-by: Anton Kolesov <akolesov@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2015-12-16Merge branch 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-armLinus Torvalds7-68/+138
Pull ARM fixes from Russell King: "Further ARM fixes: - Anson Huang noticed that we were corrupting a register we shouldn't be during suspend on some CPUs. - Shengjiu Wang spotted a bug in the 'swp' instruction emulation. - Will Deacon fixed a bug in the ASID allocator. - Laura Abbott fixed the kernel permission protection to apply to all threads running in the system. - I've fixed two bugs with the domain access control register handling, one to do with printing an appropriate value at oops time, and the other to further fix the uaccess_with_memcpy code" * 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: ARM: 8475/1: SWP emulation: Restore original *data when failed ARM: 8471/1: need to save/restore arm register(r11) when it is corrupted ARM: fix uaccess_with_memcpy() with SW_DOMAIN_PAN ARM: report proper DACR value in oops dumps ARM: 8464/1: Update all mm structures with section adjustments ARM: 8465/1: mm: keep reserved ASIDs in sync with mm after multiple rollovers
2015-12-16Partial revert of "powerpc: Individual System V IPC system calls"Michael Ellerman2-24/+12
This partially reverts commit a34236155afb1cc41945e58388ac988431bcb0b8. While reviewing the glibc patch to exploit the individual IPC calls, Arnd & Andreas noticed that we were still requiring userspace to pass IPC_64 in order to get the new style IPC API. With a bit of cleanup in the kernel we can drop that requirement, and instead only provide the new style API, which will simplify things for userspace. Rather than try and sneak that patch into 4.4, instead we will drop the individual IPC calls for powerpc, and merge them again in 4.5 once the cleanup patch has gone in. Because we've already added sys_mlock2() as syscall #378, we don't do a full revert of the IPC calls. Instead we drop the __NR #defines, and send those now undefined syscall numbers to sys_ni_syscall(). This leaves a gap in the syscall numbers, but we'll reuse them when we merge the individual IPC calls. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Acked-by: Arnd Bergmann <arnd@arndb.de>
2015-12-15Revert "scatterlist: use sg_phys()"Dan Williams2-2/+3
commit db0fa0cb0157 "scatterlist: use sg_phys()" did replacements of the form: phys_addr_t phys = page_to_phys(sg_page(s)); phys_addr_t phys = sg_phys(s) & PAGE_MASK; However, this breaks platforms where sizeof(phys_addr_t) > sizeof(unsigned long). Revert for 4.3 and 4.4 to make room for a combined helper in 4.5. Cc: <stable@vger.kernel.org> Cc: Jens Axboe <axboe@fb.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Russell King <linux@arm.linux.org.uk> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Fixes: db0fa0cb0157 ("scatterlist: use sg_phys()") Suggested-by: Joerg Roedel <joro@8bytes.org> Reported-by: Vitaly Lavrov <vel21ripn@gmail.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2015-12-15Merge tag 'please-pull-mlock2' of ↵Linus Torvalds3-1/+3
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux Pull ia64 fix from Tony Luck: "Wire up mlock2() syscall for ia64" * tag 'please-pull-mlock2' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux: [IA64] Enable mlock2 syscall for ia64
2015-12-15Fix user-visible spelling errorLinus Torvalds1-1/+1
Pavel Machek reports a warning about W+X pages found in the "Persisent" kmap area. After grepping for it (using the correct spelling), and not finding it, I noticed how the debug printk was just misspelled. Fix it. The actual mapping bug that Pavel reported is still open. It's apparently a separate issue from the known EFI page tables, looks like it's related to the HIGHMEM mappings. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-12-15ARM: 8475/1: SWP emulation: Restore original *data when failedShengjiu Wang1-3/+3
__user_swpX_asm maybe failed in first STREX operation, emulate_swpX will try again, but the *data has been changed in first time. which causes the result is wrong. This patch is to fix this issue. When STREX succeed, change the *data. if it fail, *data is not changed. Signed-off-by: Shengjiu Wang <shengjiu.wang@freescale.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-12-15ARM: 8471/1: need to save/restore arm register(r11) when it is corruptedAnson Huang1-2/+2
In cpu_v7_do_suspend routine, r11 is used while it is NOT saved/restored, different compiler may have different usage of ARM general registers, so it may cause issues during calling cpu_v7_do_suspend. We meet kernel fault occurs when using GCC 4.8.3, r11 contains valid value before calling into cpu_v7_do_suspend, but when returned from this routine, r11 is corrupted and lead to kernel fault. Doing save/restore for those corrupted registers is a must in assemble code. Signed-off-by: Anson Huang <Anson.Huang@freescale.com> Reviewed-by: Nicolas Pitre <nico@linaro.org> Cc: <stable@vger.kernel.org> # v3.3+ Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-12-15ARM: fix uaccess_with_memcpy() with SW_DOMAIN_PANRussell King2-6/+27
The uaccess_with_memcpy() code is currently incompatible with the SW PAN code: it takes locks within the region that we've changed the DACR, potentially sleeping as a result. As we do not save and restore the DACR across co-operative sleep events, can lead to an incorrect DACR value later in this code path. Reported-by: Peter Rosin <peda@axentia.se> Tested-by: Peter Rosin <peda@axentia.se> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-12-14[IA64] Enable mlock2 syscall for ia64Tony Luck3-1/+3
New system call added in commit a8ca5d0ecbdde5cc3d7accacbd69968b0c98764e mm: mlock: add new mlock system call Signed-off-by: Tony Luck <tony.luck@intel.com>
2015-12-14xen/x86/pvh: Use HVM's flush_tlb_others opBoris Ostrovsky1-7/+2
Using MMUEXT_TLB_FLUSH_MULTI doesn't buy us much since the hypervisor will likely perform same IPIs as would have the guest. More importantly, using MMUEXT_INVLPG_MULTI may not to invalidate the guest's address on remote CPU (when, for example, VCPU from another guest is running there). Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Suggested-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-12-13Merge branch 'irq-urgent-for-linus' of ↵Linus Torvalds2-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fixlets from Thomas Gleixner: "Two trivial fixes which add missing header fileas and forward declarations so the code will compile even when the magic include chains are different" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/gic-v3: Add missing include for barrier.h irqchip/gic-v3: Add missing struct device_node declaration
2015-12-13Merge tag 'fixes-for-linus' of ↵Linus Torvalds17-27/+62
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Arnd Bergmann: "Here are a bunch of small bug fixes for various ARM platforms, nothing really sticks out this week, most of either fixes bugs in code that was just added in 4.4, or that has been broken for many years without anyone noticing. at91/sama5d2: - fix sama5de hardware setup of sd/mmc interface - proper selection of pinctrl drivers. PIO4 is necessary for sama5d2 berlin: - fix incorrect clock input for SDIO exynos: - Fix potential NULL pointer dereference in Exynos PMU driver. imx: - Fix vf610 SAI clock configuration bug which is discovered by the newly added master mode support in SAI audio driver. - Fix buggy L2 cache latency values in vf610 device trees, which may cause system hang when cpu runs at a higher frequency. ixp4xx: - fix prototypes for readl/writel functions ls2080a: - use little-endian register access for GPIO and SDHCI omap: - Fix clock source for ARM TWD and global timers on am437x - Always select REGULATOR_FIXED_VOLTAGE for omap2+ instead of when MACH_OMAP3_PANDORA is selected - Fix SPI DMA handles for dm816x as only some were mapped - Fix up mbox cells for dm816x to make mailbox usable pxa: - use PWM lookup table for all ezx machines s3c24xx: - Remove incorrect __init annotation from s3c24xx cpufreq driver structures. versatile: - fix PCI IRQ mapping on Versatile PB" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ls2080a/dts: Add little endian property for GPIO IP block dt-bindings: define little-endian property for QorIQ GPIO ARM64: dts: ls2080a: fix eSDHC endianness ARM: dts: vf610: use reset values for L2 cache latencies ARM: pxa: use PWM lookup table for all machines ARM: dts: berlin: add 2nd clock for BG2Q sdhci0 and sdhci1 ARM: dts: berlin: correct BG2Q's sdhci2 2nd clock ARM: dts: am4372: fix clock source for arm twd and global timers ARM: at91: fix pinctrl driver selection ARM: at91/dt: add always-on to 1.8V regulator ARM: dts: vf610: fix clock definition for SAI2 ARM: imx: clk-vf610: fix SAI clock tree ARM: ixp4xx: fix read{b,w,l} return types irqchip/versatile-fpga: Fix PCI IRQ mapping on Versatile PB ARM: OMAP2+: enable REGULATOR_FIXED_VOLTAGE ARM: dts: add dm816x missing spi DT dma handles ARM: dts: add dm816x missing #mbox-cells cpufreq: s3c24xx: Do not mark s3c2410_plls_add as __init ARM: EXYNOS: Fix potential NULL pointer access in exynos_sys_powerdown_conf
2015-12-13Merge tag 'powerpc-4.4-4' of ↵Linus Torvalds3-47/+33
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: - opal-irqchip: Fix double endian conversion from Alistair Popple - cxl: Set endianess of kernel contexts from Frederic Barrat - sbc8641: drop bogus PHY IRQ entries from DTS file from Paul Gortmaker - Revert "powerpc/eeh: Don't unfreeze PHB PE after reset" from Andrew Donnellan * tag 'powerpc-4.4-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: Revert "powerpc/eeh: Don't unfreeze PHB PE after reset" powerpc/sbc8641: drop bogus PHY IRQ entries from DTS file cxl: Set endianess of kernel contexts powerpc/opal-irqchip: Fix double endian conversion
2015-12-12Merge branch 'akpm' (patches from Andrew)Linus Torvalds2-2/+2
Merge misc fixes from Andrew Morton: "17 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: MIPS: fix DMA contiguous allocation sh64: fix __NR_fgetxattr ocfs2: fix SGID not inherited issue mm/oom_kill.c: avoid attempting to kill init sharing same memory drivers/base/memory.c: prohibit offlining of memory blocks with missing sections tmpfs: fix shmem_evict_inode() warnings on i_blocks mm/hugetlb.c: fix resv map memory leak for placeholder entries mm: hugetlb: call huge_pte_alloc() only if ptep is null kernel: remove stop_machine() Kconfig dependency mm: kmemleak: mark kmemleak_init prototype as __init mm: fix kerneldoc on mem_cgroup_replace_page osd fs: __r4w_get_page rely on PageUptodate for uptodate MAINTAINERS: make Vladimir co-maintainer of the memory controller mm, vmstat: allow WQ concurrency to discover memory reclaim doesn't make any progress mm: fix swapped Movable and Reclaimable in /proc/pagetypeinfo memcg: fix memory.high target mm: hugetlb: fix hugepage memory leak caused by wrong reserve count
2015-12-12Merge branch 'parisc-4.4-3' of ↵Linus Torvalds4-20/+5
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc fixes from Helge Deller: "Fix the boot crash on Mako machines with Huge Pages, prevent a panic with SATA controllers (and others) by correctly calculating the IOMMU space, hook up the mlock2 syscall and drop unneeded code in the parisc pci code" * 'parisc-4.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Disable huge pages on Mako machines parisc: Wire up mlock2 syscall parisc: Remove unused pcibios_init_bus() parisc iommu: fix panic due to trying to allocate too large region
2015-12-12Merge tag 'arm64-fixes' of ↵Linus Torvalds2-6/+11
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Catalin Marinas: - Update the linker script to use L1_CACHE_BYTES instead of hard-coded 64. We recently changed L1_CACHE_BYTES to 128 - Improve race condition reporting on set_pte_at() and change the BUG to WARN_ONCE. With hardware update of the accessed/dirty state, we need to ensure that set_pte_at() does not inadvertently override hardware updated state. The patch also makes the checks ignore !pte_valid() new entries * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: Improve error reporting on set_pte_at() checks arm64: update linker script to increased L1_CACHE_BYTES value
2015-12-12MIPS: fix DMA contiguous allocationQais Yousef1-1/+1
Recent changes to how GFP_ATOMIC is defined seems to have broken the condition to use mips_alloc_from_contiguous() in mips_dma_alloc_coherent(). I couldn't bottom out the exact change but I think it's this commit d0164adc89f6 ("mm, page_alloc: distinguish between being unable to sleep, unwilling to sleep and avoiding waking kswapd"). GFP_ATOMIC has multiple bits set and the check for !(gfp & GFP_ATOMIC) isn't enough. The reason behind this condition is to check whether we can potentially do a sleeping memory allocation. Use gfpflags_allow_blocking() instead which should be more robust. Signed-off-by: Qais Yousef <qais.yousef@imgtec.com> Acked-by: Mel Gorman <mgorman@techsingularity.net> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-12-12sh64: fix __NR_fgetxattrDmitry V. Levin1-1/+1
According to arch/sh/kernel/syscalls_64.S and common sense, __NR_fgetxattr has to be defined to 259, but it doesn't. Instead, it's defined to 269, which is of course used by another syscall, __NR_sched_setaffinity in this case. This bug was found by strace test suite. Signed-off-by: Dmitry V. Levin <ldv@altlinux.org> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-12-12parisc: Disable huge pages on Mako machinesHelge Deller1-1/+2
Mako-based machines (PA8800 and PA8900 CPUs) don't allow aliasing on non-equaivalent addresses. Signed-off-by: Helge Deller <deller@gmx.de>
2015-12-12parisc: Wire up mlock2 syscallHelge Deller2-1/+3
Signed-off-by: Helge Deller <deller@gmx.de>
2015-12-12parisc: Remove unused pcibios_init_bus()Bjorn Helgaas1-18/+0
There are no callers of pcibios_init_bus(), so remove it. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Helge Deller <deller@gmx.de>
2015-12-12ARC: intc: Document arc_request_percpu_irq() betterVineet Gupta1-0/+12
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2015-12-12ARCv2: perf: Ensure perf intr gets enabled on all coresVineet Gupta1-23/+9
This was the second perf intr issue perf sampling on multicore requires intr to be enabled on all cores. ARC perf probe code used helper arc_request_percpu_irq() which calls - request_percpu_irq() on core0 - enable_percpu_irq() on all all cores (including core0) genirq requires that request be made ahead of enable call. However if perf probe happened on non core0 (observed on a 3.18 kernel), enable would get called ahead of request, failing obviously and rendering perf intr disabled on all such cores [ 11.120000] 1 ARC perf : 8 counters (48 bits), 113 conditions, [overflow IRQ support] [ 11.130000] 1 -----> enable_percpu_irq() IRQ 20 failed [ 11.140000] 3 -----> enable_percpu_irq() IRQ 20 failed [ 11.140000] 2 -----> enable_percpu_irq() IRQ 20 failed [ 11.140000] 0 =====> request_percpu_irq() IRQ 20 [ 11.140000] 0 -----> enable_percpu_irq() IRQ 20 Fix this fragility, by calling request_percpu_irq() on whatever core calls probe (there is no requirement on which core calls this anyways) and then calling enable on each cores. Interestingly this started as invesigation of STAR 9000838902: "sporadically IRQs enabled on perf prob" which was about occassional boot spew as request_percpu_irq got called non-locally (from an IPI), and re-enabled interrupts in following path proc_mkdir -> spin_unlock_irq() which the irq work code didn't like. | ARC perf : 8 counters (48 bits), 113 conditions, [overflow IRQ support] | | BUG: failure at ../kernel/irq_work.c:135/irq_work_run_list()! | CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.18.10-01127-g285efb8e66d1 #2 | | Stack Trace: | arc_unwind_core.constprop.1+0x94/0x104 | dump_stack+0x62/0x98 | irq_work_run_list+0xb0/0xb4 | irq_work_run+0x22/0x3c | do_IPI+0x74/0x9c | handle_irq_event_percpu+0x34/0x164 | handle_percpu_irq+0x58/0x78 | generic_handle_irq+0x1e/0x2c | arch_do_IRQ+0x3c/0x60 | ret_from_exception+0x0/0x8 Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-snps-arc@lists.infradead.org Cc: linux-kernel@vger.kernel.org Cc: Alexey Brodkin <abrodkin@synopsys.com> Cc: <stable@vger.kernel.org> #4.2+ Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2015-12-12ARC: intc: No need to clear IRQ_NOAUTOENVineet Gupta1-5/+8
arc_request_percpu_irq() is called by all cores to request/enable percpu irq. It has some "prep" calls needed by genirq: - setup percpu devid - disable IRQ_NOAUTOEN However given that enable_percpu_irq() is called enayways, latter can be avoided. We are now left with irq_set_percpu_devid() quirk and that too for ARCompact builds only, since previous patch updated ARCv2 intc to do this in the "right" place, i.e. irq map function. By next release, this will ultimately be fixed for ARCompact as well. Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Alexey Brodkin <abrodkin@synopsys.com> Cc: linux-snps-arc@lists.infradead.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2015-12-12ARCv2: intc: Fix random perf irq disabling in SMP setupVineet Gupta1-2/+13
As part of fixing another perf issue, observed that after a perf run, the interrupt got disabled on one/more cores. Turns out that despite requesting perf irq as percpu, the flow handler registered was not handle_percpu_irq() Given that on ARCv2 cores, IRQs < 24 are always private to cpu, we register the right handler at the very onset. Before Fix | [ARCLinux]# cat /proc/interrupts | grep perf | 20: 0 0 0 0 ARCv2 core Intc 20 ARC perf counters | | [ARCLinux]# perf record -c 20000 /sbin/hackbench | Running with 10*40 (== 400) tasks. | | [ARCLinux]# cat /proc/interrupts | grep perf | 20: 0 522 8 51916 ARCv2 core Intc 20 ARC perf counters | | [ARCLinux]# perf record -c 20000 /sbin/hackbench | Running with 10*40 (== 400) tasks. | | [ARCLinux]# cat /proc/interrupts | grep perf | 20: 0 522 8 104368 ARCv2 core Intc 20 ARC perf counters After Fix | [ARCLinux]# cat /proc/interrupts | grep perf | 20: 0 0 0 0 ARCv2 core Intc 20 ARC perf counters | | [ARCLinux]# perf record -c 20000 /sbin/hackbench | Running with 10*40 (== 400) tasks. | | [ARCLinux]# cat /proc/interrupts | grep perf | 20: 64198 62012 62697 67803 ARCv2 core Intc 20 ARC perf counters | | [ARCLinux]# perf record -c 20000 /sbin/hackbench | Running with 10*40 (== 400) tasks. | | [ARCLinux]# cat /proc/interrupts | grep perf | 20: 126014 122792 123301 133654 ARCv2 core Intc 20 ARC perf counters Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Alexey Brodkin <abrodkin@synopsys.com> Cc: stable@vger.kernel.org #4.2+ Cc: linux-kernel@vger.kernel.org Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2015-12-12Merge tag 'imx-fixes-4.4-2' of ↵Kevin Hilman3-8/+5
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into fixes Merge "ARM: imx: fixes for 4.4, 2nd round" from Shawn Guo: The i.MX fixes for 4.4, 2nd round: - Fix vf610 SAI clock configuration bug which is discovered by the newly added master mode support in SAI audio driver. - Fix buggy L2 cache latency values in vf610 device trees, which may cause system hang when cpu runs at a higher frequency. * tag 'imx-fixes-4.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: dts: vf610: use reset values for L2 cache latencies ARM: dts: vf610: fix clock definition for SAI2 ARM: imx: clk-vf610: fix SAI clock tree
2015-12-12ls2080a/dts: Add little endian property for GPIO IP blockLiu Gang1-0/+4
The GPIO block for ls2080a platform has little endian registers, the GPIO driver needs this property to read/write registers by right interface. Signed-off-by: Liu Gang <Gang.Liu@freescale.com> Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Kevin Hilman <khilman@linaro.org>
2015-12-12ARM64: dts: ls2080a: fix eSDHC endiannessyangbo lu1-0/+1
Add the "little-endian" property to fix the issue that eSDHC is not working and dumping out "mmc0: Controller never released inhibit bit(s)." error messages constantly. Fixes: 5461597f6ce0 ("dts/ls2080a: Update DTSI to add support of various peripherals") Signed-off-by: Yangbo Lu <yangbo.lu@freescale.com> Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Kevin Hilman <khilman@linaro.org>
2015-12-11arm64: Improve error reporting on set_pte_at() checksCatalin Marinas1-4/+8
Currently the BUG_ON() checks do not give enough information about the PTEs being set. This patch changes BUG_ON to WARN_ONCE and dumps the values of the old and new PTEs. In addition, the checks are only made if the new PTE entry is valid. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Reported-by: Ming Lei <tom.leiming@gmail.com> Cc: Will Deacon <will.deacon@arm.com>
2015-12-11ARM: dts: vf610: use reset values for L2 cache latenciesStefan Agner2-6/+1
Linux on Vybrid used several different L2 latencies so far, none of them seem to be the right ones. According to the application note AN4947 ("Understanding Vybrid Architecture"), the tag portion runs on CPU clock and is inside the L2 cache controller, whereas the data portion is stored in the external SRAM running on platform clock. Hence it is likely that the correct value requires a higher data latency then tag latency. These are the values which have been used so far: - The mainline values: arm,data-latency = <1 1 1>; arm,tag-latency = <2 2 2>; Those values have lead to problems on higher clocks. They look like a poor translation from the reset values (missing +1 offset and a mix up between tag/latency values). - The Linux 3.0 (SoC vendor BSP) values (converted to DT notation): arm,data-latency = <4 2 3> arm,tag-latency = <4 2 3> The cache initialization function along with the value matches the i.MX6 code from the same kernel, so it seems that those values have just been copied. - The Colibri values: arm,data-latency = <2 1 2>; arm,tag-latency = <3 2 3>; Those were a mix between the values of the Linux 3.0 based BSP and the mainline values above. - The SoC Reset values (converted to DT notation): arm,data-latency = <3 3 3>; arm,tag-latency = <2 2 2>; So far there is no official statement on what the correct values are. See also the related Freescale community thread: https://community.freescale.com/message/579785#579785 For now, the reset values seem to be the best bet. Remove all other "bogus" values and use the reset value on vf610.dtsi level. Signed-off-by: Stefan Agner <stefan@agner.ch> Cc: <stable@vger.kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2015-12-11Merge tag 'omap-for-v4.4/fixes-rc4' of ↵Arnd Bergmann4-5/+17
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes Merge "omap fixes against v4.4-rc4" from Tony Lindgren Few fixes for omaps for v4.4-rc cycle: - Fix clock source for ARM TWD and global timers on am437x - Always select REGULATOR_FIXED_VOLTAGE for omap2+ instead of when MACH_OMAP3_PANDORA is selected - Fix SPI DMA handles for dm816x as only some were mapped - Fix up mbox cells for dm816x to make mailbox usable * tag 'omap-for-v4.4/fixes-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: am4372: fix clock source for arm twd and global timers ARM: OMAP2+: enable REGULATOR_FIXED_VOLTAGE ARM: dts: add dm816x missing spi DT dma handles ARM: dts: add dm816x missing #mbox-cells
2015-12-11ARM: pxa: use PWM lookup table for all machinesArnd Bergmann1-0/+5
The recent change to use a pwm lookup table for the ezx machines was incomplete and only changed the a780 model, but not the other ones in the same file. This adds the missing calls to pwm_add_table(). Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: c3322022897c ("ARM: pxa: ezx: Use PWM lookup table") Acked-by: Thierry Reding <thierry.reding@gmail.com> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
2015-12-11Merge tag 'berlin-fixes-for-4.4-rc1-1' of ↵Arnd Bergmann1-3/+5
git://git.infradead.org/users/hesselba/linux-berlin into fixes Merge "Marvell Berlin fixes for 4.4-rc1 (round 1)" from Sebastian Hesselbarth: - fix wrong SDIO DT clocks on BG2Q * tag 'berlin-fixes-for-4.4-rc1-1' of git://git.infradead.org/users/hesselba/linux-berlin: ARM: dts: berlin: add 2nd clock for BG2Q sdhci0 and sdhci1 ARM: dts: berlin: correct BG2Q's sdhci2 2nd clock
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-11 14:34:14 +0300