summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)AuthorFilesLines
2017-02-28kprobes: move kprobe declarations to asm-generic/kprobes.hLuis R. Rodriguez36-14/+96
Often all is needed is these small helpers, instead of compiler.h or a full kprobes.h. This is important for asm helpers, in fact even some asm/kprobes.h make use of these helpers... instead just keep a generic asm file with helpers useful for asm code with the least amount of clutter as possible. Likewise we need now to also address what to do about this file for both when architectures have CONFIG_HAVE_KPROBES, and when they do not. Then for when architectures have CONFIG_HAVE_KPROBES but have disabled CONFIG_KPROBES. Right now most asm/kprobes.h do not have guards against CONFIG_KPROBES, this means most architecture code cannot include asm/kprobes.h safely. Correct this and add guards for architectures missing them. Additionally provide architectures that not have kprobes support with the default asm-generic solution. This lets us force asm/kprobes.h on the header include/linux/kprobes.h always, but most importantly we can now safely include just asm/kprobes.h on architecture code without bringing the full kitchen sink of header files. Two architectures already provided a guard against CONFIG_KPROBES on its kprobes.h: sh, arch. The rest of the architectures needed gaurds added. We avoid including any not-needed headers on asm/kprobes.h unless kprobes have been enabled. In a subsequent atomic change we can try now to remove compiler.h from include/linux/kprobes.h. During this sweep I've also identified a few architectures defining a common macro needed for both kprobes and ftrace, that of the definition of the breakput instruction up. Some refer to this as BREAKPOINT_INSTRUCTION. This must be kept outside of the #ifdef CONFIG_KPROBES guard. [mcgrof@kernel.org: fix arm64 build] Link: http://lkml.kernel.org/r/CAB=NE6X1WMByuARS4mZ1g9+W=LuVBnMDnh_5zyN0CLADaVh=Jw@mail.gmail.com [sfr@canb.auug.org.au: fixup for kprobes declarations moving] Link: http://lkml.kernel.org/r/20170214165933.13ebd4f4@canb.auug.org.au Link: http://lkml.kernel.org/r/20170203233139.32682-1-mcgrof@kernel.org Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: Ingo Molnar <mingo@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-26Merge tag 'platform-drivers-x86-v4.11-1' of ↵Linus Torvalds1-0/+6
git://git.infradead.org/linux-platform-drivers-x86 Pull x86 platform driver updates from Darren Hart: "Big picture: - New intel_turbo_max_3 driver, providing max core frequency information to the scheduler. Intel PMC APL support, s0ix read API, and fixes. - New Silead touchscreen platform touchscreen descriptions. Additional hotkey support for the intel-hid driver. - New model support for dell-laptop and hp_accel. - Several cleanups, especially to the fujitsu-laptop and intel_mid_powerbtn drivers. Detail summary: platorm/x86: - silead depends on I2C being built-in - add support for devices with Silead touchscreens - Support Turbo Boost Max 3.0 for non HWP systems intel_turbo_max_3: - make it explicitly non-modular dell-laptop: - Add Latitude 7480 and others to the DMI whitelist intel-hid: - Support 5 button array thinkpad_acpi: - Call led_classdev_notify_brightness_hw_changed on kbd brightness change - Use brightness_set_blocking callback for LEDs - Stop setting led_classdev brightness directly acer-wmi: - add another KEY_WLAN keycode - Inform firmware that RF Button Driver is active - setup accelerometer when machine has appropriate notify event asus-wireless: - Fix indentation - Use per-HID HSWC parameters intel_pmc_ipc: - Add APL PMC PCI Id - read s0ix residency API - Remove unused iTCO_version variable alienware-wmi: - Remove header duplicate intel_pmc_core: - fix out-of-bounds accesses on stack intel_mid_powerbtn: - Use SCU IPC directly - Unify IRQ acknowledgment - Move comment to where it belongs - Unify PBSTATUS access - Remove snail address - Sort headers alphabetically - Join string literals - Enable driver for Merrifield - Acknowledge interrupts - Factor out mfld_ack() - Introduce driver data - Substitute mfld by mid - Convert to use devm_*() fujitsu-laptop: - make hotkey handling functions more similar - break up complex loop condition - move keycode processing to separate functions - decrease indentation in acpi_fujitsu_hotkey_notify() - simplify logolamp_get() - rework logolamp_set() to properly handle errors - set default trigger for radio LED to rfkill-any dell-smbios: - Auto-select as needed intel_mid_thermal: - Fix module autoload - Remove duplicated platform device ID mlx-platform: - mlxcpld-hotplug driver style fixes hp_accel: - Add support for HP ZBook 17" * tag 'platform-drivers-x86-v4.11-1' of git://git.infradead.org/linux-platform-drivers-x86: (45 commits) platform/x86: intel_turbo_max_3: make it explicitly non-modular platform/x86: dell-laptop: Add Latitude 7480 and others to the DMI whitelist platform/x86: intel-hid: Support 5 button array platform/x86: thinkpad_acpi: Call led_classdev_notify_brightness_hw_changed on kbd brightness change platform/x86: thinkpad_acpi: Use brightness_set_blocking callback for LEDs platform/x86: thinkpad_acpi: Stop setting led_classdev brightness directly leds: class: Add new optional brightness_hw_changed attribute platform/x86: acer-wmi: add another KEY_WLAN keycode platform/x86: acer-wmi: Inform firmware that RF Button Driver is active platform/x86: asus-wireless: Fix indentation platform/x86: asus-wireless: Use per-HID HSWC parameters platform/x86: intel_pmc_ipc: Add APL PMC PCI Id platform/x86: intel_pmc_ipc: read s0ix residency API platform/x86: alienware-wmi: Remove header duplicate platform/x86: intel_mid_powerbtn: Use SCU IPC directly platform/x86: intel_mid_powerbtn: Unify IRQ acknowledgment platform/x86: intel_mid_powerbtn: Move comment to where it belongs platform/x86: intel_mid_powerbtn: Unify PBSTATUS access platform/x86: intel_pmc_core: fix out-of-bounds accesses on stack platform/x86: silead depends on I2C being built-in ...
2017-02-26Merge tag 'clk-for-linus' of ↵Linus Torvalds10-1897/+238
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "The usual collection of new drivers, non-critical fixes, and updates to existing clk drivers. The bulk of the work is on Allwinner and Rockchip SoCs, but there's also an Intel Atom driver in here too. New Drivers: - Tegra BPMP firmware - Hisilicon hi3660 SoCs - Rockchip rk3328 SoCs - Intel Atom PMC - STM32F746 - IDT VersaClock 5P49V5923 and 5P49V5933 - Marvell mv98dx3236 SoCs - Allwinner V3s SoCs Removed Drivers: - Samsung Exynos4415 SoCs Updates: - Migrate ABx500 to OF - Qualcomm IPQ4019 CPU clks and general PLL support - Qualcomm MSM8974 RPM - Rockchip non-critical fixes and clk id additions - Samsung Exynos4412 CPUs - Socionext UniPhier NAND and eMMC support - ZTE zx296718 i2s and other audio clks - Renesas CAN and MSIOF clks for R-Car M3-W - Renesas resets for R-Car Gen2 and Gen3 and RZ/G1 - TI CDCE913, CDCE937, and CDCE949 clk generators - Marvell Armada ap806 CPU frequencies - STM32F4* I2S/SAI support - Broadcom BCM2835 DSI support - Allwinner sun5i and A80 conversion to new style clk bindings" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (130 commits) clk: renesas: mstp: ensure register writes complete clk: qcom: Do not drop device node twice clk: mvebu: adjust clock handling for the CP110 system controller clk: mvebu: Expand mv98dx3236-core-clock support clk: zte: add i2s clocks for zx296718 clk: sunxi-ng: sun9i-a80: Fix wrong pointer passed to PTR_ERR() clk: sunxi-ng: select SUNXI_CCU_MULT for sun5i clk: sunxi-ng: Check kzalloc() for errors and cleanup error path clk: tegra: Add BPMP clock driver clk: uniphier: add eMMC clock for LD11 and LD20 SoCs clk: uniphier: add NAND clock for all UniPhier SoCs ARM: dts: sun9i: Switch to new clock bindings clk: sunxi-ng: Add A80 Display Engine CCU clk: sunxi-ng: Add A80 USB CCU clk: sunxi-ng: Add A80 CCU clk: sunxi-ng: Support separately grouped PLL lock status register clk: sunxi-ng: mux: Get closest parent rate possible with CLK_SET_RATE_PARENT clk: sunxi-ng: mux: honor CLK_SET_RATE_NO_REPARENT flag clk: sunxi-ng: mux: Fix determine_rate for mux clocks with pre-dividers clk: qcom: SDHCI enablement on Nexus 5X / 6P ...
2017-02-26Merge tag 'for-next-dma_ops' of ↵Linus Torvalds108-278/+218
git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma Pull rdma DMA mapping updates from Doug Ledford: "Drop IB DMA mapping code and use core DMA code instead. Bart Van Assche noted that the ib DMA mapping code was significantly similar enough to the core DMA mapping code that with a few changes it was possible to remove the IB DMA mapping code entirely and switch the RDMA stack to use the core DMA mapping code. This resulted in a nice set of cleanups, but touched the entire tree and has been kept separate for that reason." * tag 'for-next-dma_ops' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (37 commits) IB/rxe, IB/rdmavt: Use dma_virt_ops instead of duplicating it IB/core: Remove ib_device.dma_device nvme-rdma: Switch from dma_device to dev.parent RDS: net: Switch from dma_device to dev.parent IB/srpt: Modify a debug statement IB/srp: Switch from dma_device to dev.parent IB/iser: Switch from dma_device to dev.parent IB/IPoIB: Switch from dma_device to dev.parent IB/rxe: Switch from dma_device to dev.parent IB/vmw_pvrdma: Switch from dma_device to dev.parent IB/usnic: Switch from dma_device to dev.parent IB/qib: Switch from dma_device to dev.parent IB/qedr: Switch from dma_device to dev.parent IB/ocrdma: Switch from dma_device to dev.parent IB/nes: Remove a superfluous assignment statement IB/mthca: Switch from dma_device to dev.parent IB/mlx5: Switch from dma_device to dev.parent IB/mlx4: Switch from dma_device to dev.parent IB/i40iw: Remove a superfluous assignment statement IB/hns: Switch from dma_device to dev.parent ...
2017-02-25treewide: Remove remaining executable attributes from source filesJoe Perches3-0/+0
These are the current source files that should not have executable attributes set. [ Normally this would be sent through Andrew Morton's tree but his quilt tools don't like permission only patches. ] Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-25Merge branch 'akpm' (patches from Andrew)Linus Torvalds42-101/+407
Merge more updates from Andrew Morton: - almost all of the rest of MM - misc bits - KASAN updates - procfs - lib/ updates - checkpatch updates * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (124 commits) checkpatch: remove false unbalanced braces warning checkpatch: notice unbalanced else braces in a patch checkpatch: add another old address for the FSF checkpatch: update $logFunctions checkpatch: warn on logging continuations checkpatch: warn on embedded function names lib/lz4: remove back-compat wrappers fs/pstore: fs/squashfs: change usage of LZ4 to work with new LZ4 version crypto: change LZ4 modules to work with new LZ4 module version lib/decompress_unlz4: change module to work with new LZ4 module version lib: update LZ4 compressor module lib/test_sort.c: make it explicitly non-modular lib: add CONFIG_TEST_SORT to enable self-test of sort() rbtree: use designated initializers linux/kernel.h: fix DIV_ROUND_CLOSEST to support negative divisors lib/find_bit.c: micro-optimise find_next_*_bit lib: add module support to atomic64 tests lib: add module support to glob tests lib: add module support to crc32 tests kernel/ksysfs.c: add __ro_after_init to bin_attribute structure ...
2017-02-25platform/x86: intel_pmc_ipc: read s0ix residency APIShanth Murthy1-0/+6
This patch adds a new API to indicate S0ix residency in usec. It utilizes the PMC Global Control Registers (GCR) to read deep and shallow S0ix residency. PMC MMIO resources: o Lower 4kB: IPC1 (PMC inter-processor communication) interface o Upper 4kB: GCR (Global Control Registers) This enables the power management framework to take corrective actions when the platform fails to enter S0ix after kernel freeze as part of the suspend to idle flow. (echo freeze > /sys/power/state). This is expected to be used with a S0ix failsafe framework such as: <https://lwn.net/Articles/689505/> [rajneesh: folded in "fix division in 32-bit case" from Andy Shevchenko] Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@intel.com> Signed-off-by: Shanth Murthy <shanth.murthy@intel.com> [andy: fixed kbuild error, removed "total" from variables, fixed macro] Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2017-02-25Merge tag 'openrisc-for-linus' of git://github.com/openrisc/linuxLinus Torvalds23-187/+1058
Pull OpenRISC updates from Stafford Horne: "Highlights include: - optimized memset and memcpy routines, ~20% boot time saving - support for cpu idling - adding support for l.swa and l.lwa atomic operations (in spec from 2014) - use atomics to implement: bitops, cmpxchg, futex - the atomics are in preparation for SMP support" * tag 'openrisc-for-linus' of git://github.com/openrisc/linux: (25 commits) openrisc: head: Init r0 to 0 on start openrisc: Export ioremap symbols used by modules arch/openrisc/lib/memcpy.c: use correct OR1200 option openrisc: head: Remove unused strings openrisc: head: Move init strings to rodata section openrisc: entry: Fix delay slot detection openrisc: entry: Whitespace and comment cleanups scripts/checkstack.pl: Add openrisc support MAINTAINERS: Add the openrisc official repository openrisc: Add .gitignore openrisc: Add optimized memcpy routine openrisc: Add optimized memset openrisc: Initial support for the idle state openrisc: Fix the bitmask for the unit present register openrisc: remove unnecessary stddef.h include openrisc: add futex_atomic_* implementations openrisc: add optimized atomic operations openrisc: add cmpxchg and xchg implementations openrisc: add atomic bitops openrisc: add l.lwa/l.swa emulation ...
2017-02-25m68k: replace gcc specific macros with ones from compiler.hGideon Israel Dsouza10-22/+29
There is <linux/compiler.h> which provides macros for various gcc specific constructs. Eg: __weak for __attribute__((weak)). I've cleaned all instances of gcc specific attributes with the right macros for all files under /arch/m68k Link: http://lkml.kernel.org/r/1485540901-1988-3-git-send-email-gidisrael@gmail.com Signed-off-by: Gideon Israel Dsouza <gidisrael@gmail.com> Cc: Greg Ungerer <gerg@linux-m68k.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-25alpha: use generic current.hDavidlohr Bueso2-9/+1
Given that the arch does not add its own implementations, simply use the asm-generic/current.h (generic-y) header instead of duplicating code. Link: http://lkml.kernel.org/r/1485992878-4780-2-git-send-email-dave@stgolabs.net Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Matt Turner <mattst88@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-25arch/frv/mb93090-mb00/pci-frv.c: fix build warningSudip Mukherjee1-3/+8
The build of frv defconfig gives warning: arch/frv/mb93090-mb00/pci-frv.c:176:5: warning: ignoring return value of 'pci_assign_resource', declared with attribute warn_unused_result Just print an error message to silence the warning. We can not do much here on error. Link: http://lkml.kernel.org/r/1484256471-5379-1-git-send-email-sudipm.mukherjee@gmail.com Signed-off-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk> Cc: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-25mm: remove shmem_mapping() shmem_zero_setup() duplicatesHugh Dickins2-0/+2
Remove the prototypes for shmem_mapping() and shmem_zero_setup() from linux/mm.h, since they are already provided in linux/shmem_fs.h. But shmem_fs.h must then provide the inline stub for shmem_mapping() when CONFIG_SHMEM is not set, and a few more cfiles now need to #include it. Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1702081658250.1549@eggly.anvils Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Simek <monstr@monstr.eu> Cc: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-25powerpc/mm/autonuma: switch ppc64 to its own implementation of saved writeAneesh Kumar K.V1-7/+45
With this our protnone becomes a present pte with READ/WRITE/EXEC bit cleared. By default we also set _PAGE_PRIVILEGED on such pte. This is now used to help us identify a protnone pte that as saved write bit. For such pte, we will clear the _PAGE_PRIVILEGED bit. The pte still remain non-accessible from both user and kernel. [aneesh.kumar@linux.vnet.ibm.com: v3] Link: http://lkml.kernel.org/r/1487498625-10891-4-git-send-email-aneesh.kumar@linux.vnet.ibm.com Link: http://lkml.kernel.org/r/1487050314-3892-3-git-send-email-aneesh.kumar@linux.vnet.ibm.com Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Acked-by: Michael Neuling <mikey@neuling.org> Cc: Rik van Riel <riel@surriel.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Michael Ellerman <michaele@au1.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-25mm: wire up GFP flag passing in dma_alloc_from_contiguousLucas Stach5-13/+17
The callers of the DMA alloc functions already provide the proper context GFP flags. Make sure to pass them through to the CMA allocator, to make the CMA compaction context aware. Link: http://lkml.kernel.org/r/20170127172328.18574-3-l.stach@pengutronix.de Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Radim Krcmar <rkrcmar@redhat.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Alexander Graf <agraf@suse.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-25mm: cma_alloc: allow to specify GFP maskLucas Stach1-1/+2
Most users of this interface just want to use it with the default GFP_KERNEL flags, but for cases where DMA memory is allocated it may be called from a different context. No functional change yet, just passing through the flag to the underlying alloc_contig_range function. Link: http://lkml.kernel.org/r/20170127172328.18574-2-l.stach@pengutronix.de Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Radim Krcmar <rkrcmar@redhat.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Alexander Graf <agraf@suse.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-25userfaultfd: non-cooperative: add event for memory unmapsMike Rapoport4-5/+5
When a non-cooperative userfaultfd monitor copies pages in the background, it may encounter regions that were already unmapped. Addition of UFFD_EVENT_UNMAP allows the uffd monitor to track precisely changes in the virtual memory layout. Since there might be different uffd contexts for the affected VMAs, we first should create a temporary representation for the unmap event for each uffd context and then notify them one by one to the appropriate userfault file descriptors. The event notification occurs after the mmap_sem has been released. [arnd@arndb.de: fix nommu build] Link: http://lkml.kernel.org/r/20170203165141.3665284-1-arnd@arndb.de [mhocko@suse.com: fix nommu build] Link: http://lkml.kernel.org/r/20170202091503.GA22823@dhcp22.suse.cz Link: http://lkml.kernel.org/r/1485542673-24387-3-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Signed-off-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Pavel Emelyanov <xemul@virtuozzo.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-25mm: fix get_user_pages() vs device-dax pud mappingsDan Williams1-4/+24
A new unit test for the device-dax 1GB enabling currently fails with this warning before hanging the test thread: WARNING: CPU: 0 PID: 21 at lib/percpu-refcount.c:155 percpu_ref_switch_to_atomic_rcu+0x1e3/0x1f0 percpu ref (dax_pmem_percpu_release [dax_pmem]) <= 0 (0) after switching to atomic [..] CPU: 0 PID: 21 Comm: rcuos/1 Tainted: G O 4.10.0-rc7-next-20170207+ #944 [..] Call Trace: dump_stack+0x86/0xc3 __warn+0xcb/0xf0 warn_slowpath_fmt+0x5f/0x80 ? rcu_nocb_kthread+0x27a/0x510 ? dax_pmem_percpu_exit+0x50/0x50 [dax_pmem] percpu_ref_switch_to_atomic_rcu+0x1e3/0x1f0 ? percpu_ref_exit+0x60/0x60 rcu_nocb_kthread+0x339/0x510 ? rcu_nocb_kthread+0x27a/0x510 kthread+0x101/0x140 The get_user_pages() path needs to arrange for references to be taken against the dev_pagemap instance backing the pud mapping. Refactor the existing __gup_device_huge_pmd() to also account for the pud case. Link: http://lkml.kernel.org/r/148653181153.38226.9605457830505509385.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Matthew Wilcox <mawilcox@microsoft.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Nilesh Choudhury <nilesh.choudhury@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-25mm, x86: add support for PUD-sized transparent hugepagesMatthew Wilcox10-0/+251
The current transparent hugepage code only supports PMDs. This patch adds support for transparent use of PUDs with DAX. It does not include support for anonymous pages. x86 support code also added. Most of this patch simply parallels the work that was done for huge PMDs. The only major difference is how the new ->pud_entry method in mm_walk works. The ->pmd_entry method replaces the ->pte_entry method, whereas the ->pud_entry method works along with either ->pmd_entry or ->pte_entry. The pagewalk code takes care of locking the PUD before calling ->pud_walk, so handlers do not need to worry whether the PUD is stable. [dave.jiang@intel.com: fix SMP x86 32bit build for native_pud_clear()] Link: http://lkml.kernel.org/r/148719066814.31111.3239231168815337012.stgit@djiang5-desk3.ch.intel.com [dave.jiang@intel.com: native_pud_clear missing on i386 build] Link: http://lkml.kernel.org/r/148640375195.69754.3315433724330910314.stgit@djiang5-desk3.ch.intel.com Link: http://lkml.kernel.org/r/148545059381.17912.8602162635537598445.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Tested-by: Alexander Kapshuk <alexander.kapshuk@gmail.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Jan Kara <jack@suse.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Nilesh Choudhury <nilesh.choudhury@oracle.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-25mm, fs: reduce fault, page_mkwrite, and pfn_mkwrite to take only vmfDave Jiang2-22/+21
->fault(), ->page_mkwrite(), and ->pfn_mkwrite() calls do not need to take a vma and vmf parameter when the vma already resides in vmf. Remove the vma parameter to simplify things. [arnd@arndb.de: fix ARM build] Link: http://lkml.kernel.org/r/20170125223558.1451224-1-arnd@arndb.de Link: http://lkml.kernel.org/r/148521301778.19116.10840599906674778980.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Theodore Ts'o <tytso@mit.edu> Cc: Darrick J. Wong <darrick.wong@oracle.com> Cc: Matthew Wilcox <mawilcox@microsoft.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Jan Kara <jack@suse.com> Cc: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-25memblock: embed memblock type name within struct memblock_typeHeiko Carstens1-0/+1
Provide the name of each memblock type with struct memblock_type. This allows to get rid of the function memblock_type_name() and duplicating the type names in __memblock_dump_all(). The only memblock_type usage out of mm/memblock.c seems to be arch/s390/kernel/crash_dump.c. While at it, give it a name. Link: http://lkml.kernel.org/r/20170120123456.46508-4-heiko.carstens@de.ibm.com Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Philipp Hachtmann <phacht@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-25cris: use generic current.hDavidlohr Bueso2-15/+1
Given that the arch does not add its own implementations, simply use the asm-generic/current.h (generic-y) header instead of duplicating code. Link: http://lkml.kernel.org/r/1485992878-4780-3-git-send-email-dave@stgolabs.net Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Cc: Mikael Starvik <starvik@axis.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparcLinus Torvalds13-171/+449
Pull sparc updates from David Miller: 1) Support multiple huge page sizes, from Nitin Gupta. 2) Improve boot time on large memory configurations, from Pavel Tatashin. 3) Make BRK handling more consistent and documented, from Vijay Kumar. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: sparc64: Fix build error in flush_tsb_user_page sparc64: memblock resizes are not handled properly sparc64: use latency groups to improve add_node_ranges speed sparc64: Add 64K page size support sparc64: Multi-page size support Documentation/sparc: Steps for sending break on sunhv console sparc64: Send break twice from console to return to boot prom sparc64: Migrate hvcons irq to panicked cpu sparc64: Set cpu state to offline when stopped sunvdc: Add support for setting physical sector size sparc64: fix for user probes in high memory sparc: topology_64.h: Fix condition for including cpudata.h sparc32: mm: srmmu: add __ro_after_init to sparc32_cachetlb_ops structures
2017-02-24openrisc: head: Init r0 to 0 on startStafford Horne1-1/+4
Originally openrisc spec 0 specified that r0 would be wired to ground. This is no longer the case. r0 is not guaranteed to be 0 at init, so we need to initialize it to 0 before using it. Also, if we are clearing r0 we cant use r0 to clear itself. Change the the CLEAR_GPR macro to use movhi for clearing. Reported-by: Jakob Viketoft <jakob.viketoft@aacmicrotec.com> Signed-off-by: Stafford Horne <shorne@gmail.com>
2017-02-24openrisc: Export ioremap symbols used by modulesStafford Horne1-0/+2
Noticed this when building with allyesconfig. Got build failures due to iounmap and __ioremap symbols missing. This patch exports them so modules can use them. This is inline with other architectures. Signed-off-by: Stafford Horne <shorne@gmail.com>
2017-02-24arch/openrisc/lib/memcpy.c: use correct OR1200 optionValentin Rothberg1-1/+1
The Kconfig option for OR12000 is OR1K_1200. Signed-off-by: Valentin Rothberg <valentinrothberg@gmail.com> Signed-off-by: Stafford Horne <shorne@gmail.com>
2017-02-24openrisc: head: Remove unused stringsStafford Horne1-11/+0
These string definitions are no longer used removed them. Noticed this while working on a CONFIG_DEBUG_INFO build issue. Signed-off-by: Stafford Horne <shorne@gmail.com>
2017-02-24openrisc: head: Move init strings to rodata sectionStafford Horne1-0/+1
The strings used during the head/init phase of openrisc bootup were stored in the executable section of the binary. This causes compilation to fail when using CONFIG_DEBUG_INFO with error: Error: unaligned opcodes detected in executable segment Signed-off-by: Stafford Horne <shorne@gmail.com>
2017-02-24openrisc: entry: Fix delay slot detectionStafford Horne1-2/+2
Use execption SR stored in pt_regs for detection, the current SR is not correct as the handler is running after return from exception. Also, The code that checks for a delay slot uses a flag bitmask and then wants to check if the result is not zero. The test it implemented was wrong. Correct it by changing the test to check result against non zero. Signed-off-by: Stafford Horne <shorne@gmail.com>
2017-02-24openrisc: entry: Whitespace and comment cleanupsStafford Horne1-20/+18
Cleanups to whitespace and add some comments. Reading through the delay slot logic I noticed some things: - Delay slot instructions were not indented - Some comments are not lined up - Use tabs and spaces consistent with other code No functional change Signed-off-by: Stafford Horne <shorne@gmail.com>
2017-02-24openrisc: Add .gitignoreStafford Horne1-0/+1
This helps to suppress the vmlinux.lds file. Signed-off-by: Stafford Horne <shorne@gmail.com>
2017-02-24openrisc: Add optimized memcpy routineStafford Horne4-2/+128
The generic memcpy routine provided in kernel does only byte copies. Using word copies we can lower boot time and cycles spend in memcpy quite significantly. Booting on my de0 nano I see boot times go from 7.2 to 5.6 seconds. The avg cycles in memcpy during boot go from 6467 to 1887. I tested several algorithms (see code in previous patch mails) The implementations I tested and avg cycles: - Word Copies + Loop Unrolls + Non Aligned 1882 - Word Copies + Loop Unrolls 1887 - Word Copies 2441 - Byte Copies + Loop Unrolls 6467 - Byte Copies 7600 In the end I ended up going with Word Copies + Loop Unrolls as it provides best tradeoff between simplicity and boot speedups. Signed-off-by: Stafford Horne <shorne@gmail.com>
2017-02-24openrisc: Add optimized memsetOlof Kindgren4-1/+107
This adds a hand-optimized assembler version of memset and sets __HAVE_ARCH_MEMSET to use this version instead of the generic C routine Signed-off-by: Olof Kindgren <olof.kindgren@gmail.com> Signed-off-by: Stafford Horne <shorne@gmail.com>
2017-02-24openrisc: Initial support for the idle stateSebastian Macke1-0/+11
This patch adds basic support for the idle state of the cpu. The patch overrides the regular idle function, enables the interupts, checks for the power management unit and enables the cpu doze mode if available. Signed-off-by: Sebastian Macke <sebastian@macke.de> [shorne@gmail.com: Fixed checkpatch, blankline after declarations] Signed-off-by: Stafford Horne <shorne@gmail.com>
2017-02-24openrisc: Fix the bitmask for the unit present registerSebastian Macke1-2/+2
The bits were swapped, as per spec and processor implementation the power management present bit is 9 and PIC bit is 8. This patch brings the definitions into spec. Signed-off-by: Sebastian Macke <sebastian@macke.de> [shorne@gmail.com: Added commit body] Signed-off-by: Stafford Horne <shorne@gmail.com>
2017-02-24openrisc: remove unnecessary stddef.h includeStefan Kristiansson1-1/+0
This causes the build to fail when building with the or1k-musl-linux- toolchain and it is not needed. Signed-off-by: Stafford Horne <shorne@gmail.com>
2017-02-24openrisc: add futex_atomic_* implementationsStefan Kristiansson2-1/+135
Support for the futex_atomic_* operations by using the load-link/store-conditional l.lwa/l.swa instructions. Most openrisc cores provide these instructions now if not available, emulation is provided. Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> [shorne@gmail.com: remove OPENRISC_HAVE_INST_LWA_SWA config suggesed by Alan Cox https://lkml.org/lkml/2014/7/23/666] Signed-off-by: Stafford Horne <shorne@gmail.com>
2017-02-24openrisc: add optimized atomic operationsStefan Kristiansson2-1/+126
Using the l.lwa and l.swa atomic instruction pair. Most openrisc processor cores provide these instructions now. If the instructions are not available emulation is provided. Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> [shorne@gmail.com: remove OPENRISC_HAVE_INST_LWA_SWA config suggesed by Alan Cox https://lkml.org/lkml/2014/7/23/666] [shorne@gmail.com: expand to implement all ops suggested by Peter Zijlstra https://lkml.org/lkml/2017/2/20/317] Signed-off-by: Stafford Horne <shorne@gmail.com>
2017-02-24openrisc: add cmpxchg and xchg implementationsStefan Kristiansson2-2/+83
Optimized version that make use of the l.lwa and l.swa atomic instruction pair. Most openrisc cores provide these instructions now, if not available emulation is provided. Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> [shorne@gmail.com: remove OPENRISC_HAVE_INST_LWA_SWA config suggesed by Alan Cox https://lkml.org/lkml/2014/7/23/666] [shorne@gmail.com: fixed unused calculated value compiler warning in define cmpxchg] Signed-off-by: Stafford Horne <shorne@gmail.com>
2017-02-24openrisc: add atomic bitopsStefan Kristiansson2-1/+124
This utilize the load-link/store-conditional l.lwa and l.swa instructions to implement the atomic bitops. When those instructions are not available emulation is provided. Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> [shorne@gmail.com: remove OPENRISC_HAVE_INST_LWA_SWA config suggesed by Alan Cox https://lkml.org/lkml/2014/7/23/666, implement test_and_change_bit] Signed-off-by: Stafford Horne <shorne@gmail.com>
2017-02-24sparc64: Fix build error in flush_tsb_user_pageNitin Gupta2-6/+19
Patch "sparc64: Add 64K page size support" unconditionally used __flush_huge_tsb_one_entry() which is available only when hugetlb support is enabled. Another issue was incorrect TSB flushing for 64K pages in flush_tsb_user(). Signed-off-by: Nitin Gupta <nitin.m.gupta@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-24Merge tag 'drm-for-v4.11-less-shouty' of ↵Linus Torvalds1-0/+1
git://people.freedesktop.org/~airlied/linux Pull drm updates from Dave Airlie: "This is the main drm pull request for v4.11. Nothing too major, the tinydrm and mmu-less support should make writing smaller drivers easier for some of the simpler platforms, and there are a bunch of documentation updates. Intel grew displayport MST audio support which is hopefully useful to people, and FBC is on by default for GEN9+ (so people know where to look for regressions). AMDGPU has a lot of fixes that would like new firmware files installed for some GPUs. Other than that it's pretty scattered all over. I may have a follow up pull request as I know BenH has a bunch of AST rework and fixes and I'd like to get those in once they've been tested by AST, and I've got at least one pull request I'm just trying to get the author to fix up. Core: - drm_mm reworked - Connector list locking and iterators - Documentation updates - Format handling rework - MMU-less support for fbdev helpers - drm_crtc_from_index helper - Core CRC API - Remove drm_framebuffer_unregister_private - Debugfs cleanup - EDID/Infoframe fixes - Release callback - Tinydrm support (smaller drivers for simple hw) panel: - Add support for some new simple panels i915: - FBC by default for gen9+ - Shared dpll cleanups and docs - GEN8 powerdomain cleanup - DMC support on GLK - DP MST audio support - HuC loading support - GVT init ordering fixes - GVT IOMMU workaround fix amdgpu/radeon: - Power/clockgating improvements - Preliminary SR-IOV support - TTM buffer priority and eviction fixes - SI DPM quirks removed due to firmware fixes - Powerplay improvements - VCE/UVD powergating fixes - Cleanup SI GFX code to match CI/VI - Support for > 2 displays on 3/5 crtc asics - SI headless fixes nouveau: - Rework securre boot code in prep for GP10x secure boot - Channel recovery improvements - Initial power budget code - MMU rework preperation vmwgfx: - Bunch of fixes and cleanups exynos: - Runtime PM support for MIC driver - Cleanups to use atomic helpers - UHD Support for TM2/TM2E boards - Trigger mode fix for Rinato board etnaviv: - Shader performance fix - Command stream validator fixes - Command buffer suballocator rockchip: - CDN DisplayPort support - IOMMU support for arm64 platform imx-drm: - Fix i.MX5 TV encoder probing - Remove lower fb size limits msm: - Support for HW cursor on MDP5 devices - DSI encoder cleanup - GPU DT bindings cleanup sti: - stih410 cleanups - Create fbdev at binding - HQVDP fixes - Remove stih416 chip functionality - DVI/HDMI mode selection fixes - FPS statistic reporting omapdrm: - IRQ code cleanup dwi-hdmi bridge: - Cleanups and fixes adv-bridge: - Updates for nexus sii8520 bridge: - Add interlace mode support - Rework HDMI and lots of fixes qxl: - probing/teardown cleanups ZTE drm: - HDMI audio via SPDIF interface - Video Layer overlay plane support - Add TV encoder output device atmel-hlcdc: - Rework fbdev creation logic tegra: - OF node fix fsl-dcu: - Minor fixes mali-dp: - Assorted fixes sunxi: - Minor fix" [ This was the "fixed" pull, that still had build warnings due to people not even having build tested the result. I'm not a happy camper I've fixed the things I noticed up in this merge. - Linus ] * tag 'drm-for-v4.11-less-shouty' of git://people.freedesktop.org/~airlied/linux: (1177 commits) lib/Kconfig: make PRIME_NUMBERS not user selectable drm/tinydrm: helpers: Properly fix backlight dependency drm/tinydrm: mipi-dbi: Fix field width specifier warning drm/tinydrm: mipi-dbi: Silence: ‘cmd’ may be used uninitialized drm/sti: fix build warnings in sti_drv.c and sti_vtg.c files drm/amd/powerplay: fix PSI feature on Polars12 drm/amdgpu: refuse to reserve io mem for split VRAM buffers drm/ttm: fix use-after-free races in vm fault handling drm/tinydrm: Add support for Multi-Inno MI0283QT display dt-bindings: Add Multi-Inno MI0283QT binding dt-bindings: display/panel: Add common rotation property of: Add vendor prefix for Multi-Inno drm/tinydrm: Add MIPI DBI support drm/tinydrm: Add helper functions drm: Add DRM support for tiny LCD displays drm/amd/amdgpu: post card if there is real hw resetting performed drm/nouveau/tmr: provide backtrace when a timeout is hit drm/nouveau/pci/g92: Fix rearm drm/nouveau/drm/therm/fan: add a fallback if no fan control is specified in the vbios drm/nouveau/hwmon: expose power_max and power_crit ..
2017-02-24Merge tag 'armsoc-drivers' of ↵Linus Torvalds2-15/+3
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver updates from Arnd Bergmann: "Driver updates for ARM SoCs. A handful of driver changes this time around. The larger changes are: - Reset drivers for hi3660 and zx2967 - AHCI driver for Davinci, acked by Tejun and brought in here due to platform dependencies - Cleanups of atmel-ebi (External Bus Interface) - Tweaks for Rockchip GRF (General Register File) usage (kitchensink misc register range on the SoCs) - PM domains changes for support of two new ZTE SoCs (zx296718 and zx2967)" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (53 commits) soc: samsung: pmu: Add register defines for pad retention control reset: make zx2967 explicitly non-modular reset: core: fix reset_control_put soc: samsung: pm_domains: Read domain name from the new label property soc: samsung: pm_domains: Remove message about failed memory allocation soc: samsung: pm_domains: Remove unused name field soc: samsung: pm_domains: Use full names in subdomains registration log sata: ahci-da850: un-hardcode the MPY bits sata: ahci-da850: add a workaround for controller instability sata: ahci: export ahci_do_hardreset() locally sata: ahci-da850: implement a workaround for the softreset quirk sata: ahci-da850: add device tree match table sata: ahci-da850: get the sata clock using a connection id soc: samsung: pmu: Remove duplicated define for ARM_L2_OPTION register memory: atmel-ebi: Enable the SMC clock if specified soc: samsung: pmu: Remove unused and duplicated defines memory: atmel-ebi: Properly handle multiple reference to the same CS memory: atmel-ebi: Fix the test to enable generic SMC logic soc: samsung: pm_domains: Add new Exynos5433 compatible soc: samsung: pmu: Add dummy support for Exynos5433 SoC ...
2017-02-24Merge tag 'armsoc-dt64' of ↵Linus Torvalds66-1503/+4749
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM 64-bit DT updates from Arnd Bergmann: "ARM64 DT updates are fairly small this time, only two new SoCs and a handful of new machines get added, all of them similar to other hardware we already support. New SoC: - HiSilicon Kirin960/Hi3660 and HiKey960 development board - NXP LS1012a with three reference boards: http://www.nxp.com/products/microcontrollers-and-processors/arm-processors/qoriq-layerscape-arm-processors/qoriq-layerscape-1012a-low-power-communication-processor:LS1012A New development board: - Banana Pi M64, based on Allwinner A64: http://www.banana-pi.org/m64.html - SolidRun MACCHIATOBin based on Marvell Armada 8K: https://www.solid-run.com/marvell-armada-family/armada-8040-community-board/ - Broadcom BCM958712DxXMC NorthStar2 reference board (another one) A lot of platforms improve support for existing machines by adding extra devices for which a binding and driver is availabe: Allwinner: - MMC, USB ARM Juno: - Coresight, STM Broadcom: - NS2 GICv2m irqchip and PCIe Marvell: - Armada 3700 SPI, I2C, ethernet switch Mediatek: - MT8173 thermal NXP i.MX: - LS1046A thermal Qualcomm: - coresight on MSM8916, HDMI, WCNSS, SCM Renesas: - r8a779[56] thermal, powerdomain, ethernet, sound, pwm, can, can fd Rockchip: - thermal, eDP, pinctrl enhancements Samsung: - TM2 touchkey, Exynos5433 HDMI and power management improvements UniPhier: - SD reset, eMMC controller ZTE: - oppv2 cpufreq" * tag 'armsoc-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (110 commits) arm64: dts: qcom: Add msm8916 CoreSight components arm64: dts: marvell: adjust name of sd-mmc-gop clock in syscon arm64: allwinner: add BananaPi-M64 support arm64: allwinner: a64: add UART1 pin nodes arm64: allwinner: pine64: add MMC support arm64: allwinner: a64: Increase the MMC max frequency arm64: allwinner: a64: Add MMC pinctrl nodes arm64: allwinner: a64: Add MMC nodes dt-bindings: clockgen: Add compatible string for LS1012A Documentation: DT: add LS1012A compatible for SCFG and DCFG Documentation: DT: Add entry for FSL LS1012A RDB, FRDM, QDS boards arm64: dts: marvell: add generic-ahci compatibles for CP110 ahci arm64: tegra: Use symbolic reset identifiers arm64: dts: r8a7796: Mark EthernetAVB device node disabled arm64: dts: r8a7795: Mark EthernetAVB device node disabled arm64: dts: r8a7795: tidyup audma definition order arm64: dts: r8a7796: Link ARM GIC to clock and clock domain arm64: dts: r8a7795: Link ARM GIC to clock and clock domain arm64: dts: r8a7796: Add R-Car Gen3 thermal support arm64: dts: r8a7795: Add R-Car Gen3 thermal support ...
2017-02-24Merge tag 'armsoc-dt' of ↵Linus Torvalds553-5568/+16797
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM DT updates from Arnd Bergmann: "A total of 380 patches this time, mostly adding support for more hardware in the device tree descriptions. There is not much exciting here for 4.11, but I've tried my best to condense the information from the pull requests I got into a readable summary. Noteworthy changes to existing platforms include: - The GIC memory map was a bit wrong almost everywhere and now gets fixed up - The Allwinner platforms convert to the generic pinmux properties - The Marvell EBU platforms now use the new DSA binding - Samsung Exynos4212 was unused and gets removed - The Renesas power management got improved New production machines: - Lego Mindstorms EV3: https://www.lego.com/en-us/mindstorms/about-ev3 - Beelink X2 Android media box: http://linux-sunxi.org/Beelink_X2 - "Romulus" baseboard management controller for OpenPower - Axentia TSE-850 Data Radio Channel (DARC) encoder: http://www.axentia.se/db/equipment.html - Luxul XAP-1410 and XWR-1200 wireless access points: https://luxul.com/xap-1410 New SoCs: - Allwinner H2+ and V3s, both minor variations of already supported chips: http://www.allwinnertech.com/index.php?c=product&a=index&id=38 - Marvell Prestera DX packet processors based on Armada XP architecture: http://www.marvell.com/switching/prestera-dx/ - Samsung Exynos4412 Prime gets added, a minor variation of Exynos4412 New developer and reference boards: - Lichee Pi One, Lichee Pi Zero and Orange Pi Zero, all based on Allwinner SoCs: http://linux-sunxi.org/LicheePi_One http://www.orangepi.org/orangepizero/ - SAMA5d36ek Reference platform: http://www.atmel.com/tools/sama5d36-ek.aspx - Beaglebone Green Wireless and Black Wireless: https://beagleboard.org/black-wireless https://beagleboard.org/green-wireless - phyCORE-AM335x System on Module: http://phytec.com/products/system-on-modules/phycore/am335x/ - New revision of "vf610-zii" Zodiac Inflight Innovations board - Various i.MX System-on-Module: Is.IoT MX6UL, SavageBoard, Engicam i.Core: http://www.opossom.com/english/index.html http://www.savageboard.org/ http://www.engicam.com/en/products/embedded/som/sodimm/is-iot-mx6ul http://www.engicam.com/en/products/embedded/som/sodimm/i-core-m6s-dl-d-q - Liebherr (LWN) monitor 6 based on i.MX6 Quad, no idea what this is - Cleanups and bugfixes on at91, bcm53xx, i.MX, mvebu, omap, oxnas, qcom, rockchip, sti, stm32 and tegra New device supports added to some boards and SoCs, briefly by platform: - Allwinner: SPDIF, A33 cpufreq, A33 Mali GPU - Aspeed: network, ipmi bt, gpio, pinmux - Broadcom: video encoder for raspberry pi, qspi, ethernet, sd/mmc - TI DaVinci: gpio, lcdc, usb, video-in, uart - TI Keystone 2: MSM RAM, power/reset, uart - Mediatek MT2701: clocks, iommu, spi, nand, adc, thermal - Marvell EBU: ethernet switch on Turris Omnia - NXP i.MX: otp ram, USB, wifi, bluetooth, spdif, spi, pmic, eeprom, mmc, nand - TI OMAP: - Qualcomm: coresight, gyro/accelerometer, hdmi - Renesas: pmic, soc-id - Rockchip: qos - Samsung: audio on Odroid-X - Socfpga: FPGA manager, i2c, led, can, watchdog, nand, power monitor - STi: video in/out - STM32: timer, pwm, i2c, rtc, add, i2s - NVIDIA Tegra: tpm - Uniphier: mmc/sd pinmux" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (380 commits) ARM: dts: armada-385-linksys: fix DSA compatible property ARM: dts: Fix typo in armada-xp-98dx4251 ARM: DTS: Fix register map for virt-capable GIC dt-bindings: arm,gic: Fix binding example for a virt-capable GIC ARM: dts: sun8i: sinlinx: Enable audio nodes ARM: dts: sun8i: parrot: Enable audio nodes ARM: dts: sun8i: Add audio codec, dai and card for A33 ARM: dts: Add EMAC AXI settings for Arria10 ARM: dts: am335x-chiliboard: Support charger ARM: dts: am335x-chiliboard: Support power button ARM: sun8i: dt: Add mali node dt-bindings: gpu: Add Mali Utgard bindings ARM: dts: stm32: Add I2C1 support for STM32429 eval board ARM: dts: stm32: Add I2C1 support for STM32F429 SoC ARM: dts: stm32: Use clock DT binding definition on stm32f429 family dt-bindings: mfd: stm32f4: Add missing binding definition dt-bindings: mfd: stm32f4: Fix STM32F4_X_CLOCK() macro ARM: dts: stm32: Enable pwm1 and pwm3 for stm32f469-disco ARM: dts: stm32: add Timers driver for stm32f429 MCU ARM: dts: add the AB8500 sysclk to the device trees ...
2017-02-24Merge tag 'armsoc-defconfig' of ↵Linus Torvalds21-20/+299
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC defconfig updates from Arnd Bergmann: "Defconfig additions, removals, etc. Almost all of them just turn on drivers that we want on some platform, usually after the driver has been merged into mainline. There is now a new defconfig file for tango4" * tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (44 commits) ARM: multi_v7_defconfig: enable pstore configs ARM: multi_v7_defconfig: enable some newly added crypto modules ARM: davinci_all_defconfig: enable SATA modules arm64: defconfig: enable CONFIG_MTD_NAND and CONFIG_MTD_NAND_DENALI_DT arm64: defconfig: enable CONFIG_MTD_BLOCK ARM: Import tango4_defconfig ARM: omap2plus_defconfig: Enable support for RTC M41T80 ARM: omap2plus_defconfig: Enable support for micrell phys ARM: vf610m4: defconfig: enable EXT4 filesystem ARM: omap2plus_defconfig: Fix probe errors on UARTs 5 and 6 arm64: defconfig: Enable NUMA and NUMA_BALANCING arm64: defconfig: enable SMMUv3 config ARM: davinci_all_defconfig: enable iio ARM: Keystone: Enable ARCH_HAS_RESET_CONTROLLER ARM: configs: stm32: Add RTC support in STM32 defconfig ARM: defconfig: qcom: add APQ8060 DragonBoard devices ARM: qcom_defconfig: enable thermal sensors ARM: qcom_defconfig: add ahci configs ARM: qcom_defconfig: add pcie and atl1c ethernet configs ARM: qcom_defconfig: add usb related configs ...
2017-02-24Merge tag 'armsoc-arm64' of ↵Linus Torvalds2-0/+10
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC 64-bit updates from Arnd Bergmann: "Changes to platform code for 64-bit ARM platforms, only trivial stuff this time, a few defconfig changes to enable drivers, and a new entry for the Cavium ThunderX2 platform" * tag 'armsoc-arm64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: MAINTAINERS: Add Cavium ThunderX2 entry arm64: add ARCH_THUNDER2 to defconfig arm64: add THUNDER2 processor family MAINTAINERS: Extend ARM/Mediatek SoC support section arm64: defconfig: enable CONFIG_MMC_SDHCI_CADENCE arm64: defconfig: enable XORv2 for Marvell Armada 7K/8K
2017-02-24Merge tag 'armsoc-soc' of ↵Linus Torvalds59-1427/+353
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC platform updates from Arnd Bergmann: "In the SoC branch we normally collect classic arch/arm/mach-* contents, i.e. C code changes for SoC platforms. This release cycle the diffstat is quite nice, in that we're removing 3x the amount of code that's being added. The main reason for this is that there's a removal of camera drivers for Freescale i.MX chips (driver was removed so the device registration isn't needed any more). There's also removal of display initialization code for OMAP that is no longer needed. The rest are mostly minor tweaks and cleanups; constification on Samsung platforms, cleanup of ux500 platform data, purge of other unused platform data/device seutp on i.MX and other good stuff. New SoC support this cycle is for two Allwinner platforms, H2+ and V3s" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (55 commits) ARM: ux500: remove deleted file from Makefile ARM: ep93xx: Disable TS-72xx watchdog before uncompressing ARM: ux500: cut some platform data MAINTAINERS: Update for the current location of the bcm2835 tree. ARM: davinci: remove BUG_ON() from da850_register_sata() ARM: davinci: da850: model the SATA refclk ARM: davinci: da850: add con_id for the SATA clock ARM: davinci: da8xx-dt: add OF_DEV_AUXDATA entry for SATA arm: mvebu: support for SMP on 98DX3336 SoC dt-bindings: video: exynos7-decon: Remove obsolete samsung,power-domain property soc: dove: constify reset_control_ops structures ARM: mv78xx0: fix possible PCI buffer overflow MAINTAINERS: transfer maintainership for the EZX platform ARM: shmobile: rcar-gen2: Add more register documentation ARM: tegra: paz00: Fix __initdata placement ARM: OMAP: clock: Remove unused mpurate cmdline option ARM: davinci: add skeleton for pdata-quirks arm: sunxi: add support for V3s SoC ARM: OMAP2+: omap_hwmod: Add support for earlycon arm: hisi: drop extern hip01_cpu_die ...
2017-02-24Merge tag 'armsoc-fixes-nc' of ↵Linus Torvalds7-17/+44
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC non-urgent fixes from Arnd Bergmann: "We sometimes collect non-critical fixes that come in during the later part of the merge window in a branch for the next release instead, and this is that contents for v4.11. Most of these are OMAP fixes, dealing with OMAP36/37 detection, quirks and setup. There's also some fixes for Davinci and a Kconfig fix for SCPI to only enable on ARM{,64}" * tag 'armsoc-fixes-nc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: firmware: arm_scpi: Add hardware dependencies ARM: OMAP3: Fix SoC detection of OMAP36/37 Family ARM: OMAP5: Add HWMOD_SWSUP_SIDLE_ACT flag for UART ARM: dts: Fix compatible for ti81xx uarts for 8250 ARM: dts: Fix am335x and dm814x scm syscon to probe children ARM: OMAP2+: Fix init for multiple quirks for the same SoC ARM: dts: Fix omap3 off mode pull defines bus: da850-mstpri: fix my e-mail address ARM: davinci: da850: fix da850_set_pll0rate() ARM: davinci: da850: coding style fix
2017-02-23Merge tag 'pci-v4.11-changes' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: - add ASPM L1 substate support - enable PCIe Extended Tags when supported - configure PCIe MPS settings on iProc, Versatile, X-Gene, and Xilinx - increase VPD access timeout - add ACS quirks for Intel Union Point, Qualcomm QDF2400 and QDF2432 - use new pci_irq_alloc_vectors() in more drivers - fix MSI affinity memory leak - remove unused MSI interfaces and update documentation - remove unused AER .link_reset() callback - avoid pci_lock / p->pi_lock deadlock seen with perf - serialize sysfs enable/disable num_vfs operations - move DesignWare IP from drivers/pci/host/ to drivers/pci/dwc/ and refactor so we can support both hosts and endpoints - add DT ECAM-like support for HiSilicon Hip06/Hip07 controllers - add Rockchip system power management support - add Thunder-X cn81xx and cn83xx support - add Exynos 5440 PCIe PHY support * tag 'pci-v4.11-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (93 commits) PCI: dwc: Remove dependency of designware on CONFIG_PCI PCI: dwc: Add CONFIG_PCIE_DW_HOST to enable PCI dwc host PCI: dwc: Split pcie-designware.c into host and core files PCI: dwc: designware: Fix style errors in pcie-designware.c PCI: dwc: designware: Parse "num-lanes" property in dw_pcie_setup_rc() PCI: dwc: all: Split struct pcie_port into host-only and core structures PCI: dwc: designware: Get device pointer at the start of dw_pcie_host_init() PCI: dwc: all: Rename cfg_read/cfg_write to read/write PCI: dwc: all: Use platform_set_drvdata() to save private data PCI: dwc: designware: Move register defines to designware header file PCI: dwc: Use PTR_ERR_OR_ZERO to simplify code PCI: dra7xx: Group PHY API invocations PCI: dra7xx: Enable MSI and legacy interrupts simultaneously PCI: dra7xx: Add support to force RC to work in GEN1 mode PCI: dra7xx: Simplify probe code with devm_gpiod_get_optional() PCI: Move DesignWare IP support to new drivers/pci/dwc/ directory PCI: exynos: Support the PHY generic framework Documentation: binding: Modify the exynos5440 PCIe binding phy: phy-exynos-pcie: Add support for Exynos PCIe PHY Documentation: samsung-phy: Add exynos-pcie-phy binding ...
2017-02-23Merge branch 'linus' of ↵Linus Torvalds68-7272/+5337
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto update from Herbert Xu: "API: - Try to catch hash output overrun in testmgr - Introduce walksize attribute for batched walking - Make crypto_xor() and crypto_inc() alignment agnostic Algorithms: - Add time-invariant AES algorithm - Add standalone CBCMAC algorithm Drivers: - Add NEON acclerated chacha20 on ARM/ARM64 - Expose AES-CTR as synchronous skcipher on ARM64 - Add scalar AES implementation on ARM64 - Improve scalar AES implementation on ARM - Improve NEON AES implementation on ARM/ARM64 - Merge CRC32 and PMULL instruction based drivers on ARM64 - Add NEON acclerated CBCMAC/CMAC/XCBC AES on ARM64 - Add IPsec AUTHENC implementation in atmel - Add Support for Octeon-tx CPT Engine - Add Broadcom SPU driver - Add MediaTek driver" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (142 commits) crypto: xts - Add ECB dependency crypto: cavium - switch to pci_alloc_irq_vectors crypto: cavium - switch to pci_alloc_irq_vectors crypto: cavium - remove dead MSI-X related define crypto: brcm - Avoid double free in ahash_finup() crypto: cavium - fix Kconfig dependencies crypto: cavium - cpt_bind_vq_to_grp could return an error code crypto: doc - fix typo hwrng: omap - update Kconfig help description crypto: ccm - drop unnecessary minimum 32-bit alignment crypto: ccm - honour alignmask of subordinate MAC cipher crypto: caam - fix state buffer DMA (un)mapping crypto: caam - abstract ahash request double buffering crypto: caam - fix error path for ctx_dma mapping failure crypto: caam - fix DMA API leaks for multiple setkey() calls crypto: caam - don't dma_map key for hash algorithms crypto: caam - use dma_map_sg() return code crypto: caam - replace sg_count() with sg_nents_for_len() crypto: caam - check sg_count() return value crypto: caam - fix HW S/G in ablkcipher_giv_edesc_alloc() ..