summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)AuthorFilesLines
2009-10-20omap: headers: Create headers necessary for compile under mach-omap1 and ↵Tony Lindgren30-0/+100
mach-omap2 Create the headers needed for compiling under mach-omap1/include/mach and mach-omap2/include/mach. This was done with the following script: #!/bin/bash mach_files="clkdev.h gpio.h hardware.h io.h irqs.h memory.h \ smp.h system.h timex.h uncompress.h vmalloc.h" omaps="mach-omap1 mach-omap2" mach_dir_old="arch/arm/plat-omap/include/mach" plat_dir_new="arch/arm/plat-omap/include/plat" mkdir -p $plat_dir_new git add $plat_dir_new for dir in $omaps; do mach_dir_new="arch/arm/$dir/include/mach" for header in $mach_files; do file="$mach_dir_new/$header" if [ ! -f $file ]; then echo -ne "/*\n * $file\n */\n\n#include <plat/$header>\n" > $file git add $file if [ ! -f $plat_dir_new/$header ]; then git mv $mach_dir_old/$header $plat_dir_new/$header fi fi done done Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-10-20omap: headers: Move mtd-xip.h to be mach-omap1 specificTony Lindgren1-0/+0
These registers are omap1 specific. Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-10-20omap: Split vmalloc.h for mach-omap1 and mach-omap2Tony Lindgren2-5/+21
Earlier patch "omap: Remap L3, L4 to get more kernel io address space" changed the VMALLOC_END. However, this change causes problems on mach-omap1: BUG: mapping for 0xe0000000 at 0xe0000000 overlaps vmalloc space BUG: mapping for 0xe1000000 at 0xe1000000 overlaps vmalloc space Fix this by creating separate vmalloc.h files for mach-omap1 and mach-omap2. Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-10-20omap: headers: Split entry-macro.S for mach-omap1 and mach-omap2Tony Lindgren2-50/+58
Split entry-macro.S for mach-omap1 and mach-omap2 Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-10-20omap: headers: Split debug-macro.S for mach-omap1 and mach-omap2Tony Lindgren2-13/+47
This also creates the include/mach subdirectories under mach-omap1 and mach-omap2. Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-10-20omap: headers: Add mach path to include filesTony Lindgren1-6/+6
This is to prepare for moving hardware.h to live under plat instead of mach. Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-10-20omap: Add OMAP4 L3 and L4 peripherals.Santosh Shilimkar4-3/+55
This patch adds few necessary peripherals for OMAP4. Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-10-20omap: Fix DEBUG_LL UART io addressSantosh Shilimkar15-18/+18
This patch fixes the low level debug UART io address as per this series. The change is essential to have CONFIG_DEBUG_LL working. Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-10-20omap: Move SRAM map to claim more io spaceSantosh Shilimkar1-3/+3
This patch moves SRAM map to free up more kernel address io space. Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-10-20omap: Remap L3, L4 to get more kernel io address spaceSantosh Shilimkar2-40/+64
This patch remap L3 and L4 io space to get more kernel address space. With this patch, 512 MB of IO space is reclaimed. Some more combinations are possible but to make it uniform across OMAP24XX, OMAP34XX and OMAP4430, these io combinations are chosen Once this is reviewed and tested sufficiently, a documentation entry can be created to ease up reading and debugging. Like "Documentation/arm/omap/io_map.txt" Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-10-20omap: Split OMAP2_IO_ADDRESS to L3 and L4Santosh Shilimkar13-66/+75
This patch splits OMAP2_IO_ADDRESS to OMAP2_L3_IO_ADDRESS and OMAP2_L4_IO_ADDRESS to reclaim more IO space. The omap_read*() and omap_write*() functions will work only over L4 address space. Current omap kernel stack uses these functions only to access registers over L4 io address space Note that these macros should only be used when ioremap does not work. Please use ioremap instead in all new code. Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-10-20omap: Use ioremap for omap4 L4 codeTony Lindgren7-16/+42
Use ioremap for omap4 L4 code Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-10-20omap: Use getnstimeofday for omap_deviceTony Lindgren1-31/+19
Use getnstimeofday for omap_device Acked-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-10-20omap: Use ioremap in omap_hwmod.cTony Lindgren1-6/+12
Use ioremap in omap_hwmod.c Acked-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-10-20omap: Use ioremap in gpio.cTony Lindgren1-95/+129
Use ioremap in gpio.c Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-10-20omap: Use ioremap in dmtimer.cTony Lindgren1-7/+9
Use ioremap in dmtimer.c Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-10-20omap: Use ioremap in dma.cTony Lindgren1-10/+24
Use ioremap in dma.c Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-10-20omap: Use ioremap in irq.cTony Lindgren1-2/+10
Use ioremap in irq.c Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-10-16omap: Change low-level serial init to use ioremapTony Lindgren2-7/+18
Change low-level serial init to use ioremap Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-10-16Merge branch 'omap7xx-fortony-rc3' of git://robotfuzz.com/linwizard-kernel ↵Tony Lindgren22-676/+476
into omap7xx
2009-10-16Merge branch 'x86-fixes-for-linus' of ↵Linus Torvalds3-12/+13
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: Revert "x86: linker script syntax nits" x86, perf_event: Rename 'performance counter interrupt'
2009-10-16Merge branch 'merge' of ↵Linus Torvalds11-28/+28
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc/pci: Fix MODPOST warning powerpc/oprofile: Add ppc750 CL as supported by oprofile powerpc: warning: allocated section `.data_nosave' not in segment powerpc/kgdb: Fix build failure caused by "kgdb.c: unused variable 'acc'" powerpc: Fix hypervisor TLB batching powerpc/mm: Fix hang accessing top of vmalloc space powerpc: Fix memory leak in axon_msi.c powerpc/pmac: Fix issues with sleep on some powerbooks powerpc64/ftrace: use PACA to retrieve TOC in mod_return_to_handler powerpc/ftrace: show real return addresses in modules
2009-10-16Merge branch 'omap-fixes-for-linus' of ↵Linus Torvalds7-40/+59
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 * 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: OMAP2xxx clock: set up clockdomain pointer in struct clk OMAP: Fix race condition with autodeps omap: McBSP: Fix incorrect receiver stop in omap_mcbsp_stop omap: Initialization of SDRC params on Zoom2 omap: RX-51: Drop I2C-1 speed to 2200 omap: SDMA: Fixing bug in omap_dma_set_global_params() omap: CONFIG_ISP1301_OMAP redefined in Beagle defconfig
2009-10-15Revert "x86: linker script syntax nits"Ingo Molnar2-10/+11
This reverts commit e9a63a4e559fbdc522072281d05e6b13c1022f4b. This breaks older binutils, where sink-less asserts are broken. See this commit for further details: d2ba8b2: x86: Fix assert syntax in vmlinux.lds.S Acked-by: "H. Peter Anvin" <hpa@zytor.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> LKML-Reference: <4AD6523D.5030909@zytor.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-15Merge branch 'linus' into x86/urgentIngo Molnar331-5084/+1936
Merge reason: pull in latest, to be able to revert a patch there. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-15Merge commit 'ftrace/ppc' into mergeBenjamin Herrenschmidt2-5/+8
2009-10-15Merge branch '2_6_32rc4_fixes' of git://git.pwsan.com/linux-2.6 into ↵Tony Lindgren2-30/+45
omap-fixes-for-linus
2009-10-15OMAP2xxx clock: set up clockdomain pointer in struct clkPaul Walmsley1-0/+1
clock24xx.c is missing a omap2_init_clk_clkdm() in its omap2_clk_init() function. Among other bad effects, this causes the OMAP hwmod layer to oops on boot. Thanks to Carlos Aguiar <carlos.aguiar@indt.org.br> and Stefano Panella <Stefano.Panella@csr.com> for reporting this bug. Thanks to Tony Lindgren <tony@atomide.com> for N800 booting advice. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Carlos Aguiar <carlos.aguiar@indt.org.br> Cc: Stefano Panella <Stefano.Panella@csr.com> Cc: Tony Lindgren <tony@atomide.com>
2009-10-15OMAP: Fix race condition with autodepsKalle Jokiniemi1-30/+44
There is a possible race condition in clockdomain code handling hw supported idle transitions. When multiple autodeps dependencies are being added or removed, a transition of still remaining dependent powerdomain can result in false readings of the state counter. This is especially fatal for off mode state counter, as it could result in a driver not noticing a context loss. Fixed by disabling hw supported state transitions when autodeps are being changed. Signed-off-by: Kalle Jokiniemi <kalle.jokiniemi@digia.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2009-10-15Merge branch 'topic/x86-lds-nits' of ↵Linus Torvalds2-11/+10
git://git.kernel.org/pub/scm/linux/kernel/git/frob/linux-2.6-roland * 'topic/x86-lds-nits' of git://git.kernel.org/pub/scm/linux/kernel/git/frob/linux-2.6-roland: x86: linker script syntax nits
2009-10-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6Linus Torvalds3-4/+4
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6: watchdog: Fix rio watchdog probe function sparc64: Set IRQF_DISABLED on LDC channel IRQs. sparc64: Fix D-cache flushing on swapin from SW devices. sparc64: Fix niagara2 perf IRQ bits.
2009-10-15Merge branch 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6Linus Torvalds2-4/+4
* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6: [S390] sclp_vt220 build fix [S390] cio: change misleading console logic [S390] call home support: fix proc handler [S390] dasd: use idal for device characteristics [S390] Add highgprs facility to /proc/cpuinfo [S390] dasd: fix locking bug [S390] tape390: Fix request queue handling in block driver [S390] hypfs: Use subcode 6 if subcode 7 is not available
2009-10-15Merge branch 'sh/for-2.6.32' of ↵Linus Torvalds7-20/+41
git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6 * 'sh/for-2.6.32' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: sh: Fix a TRACE_IRQS_OFF typo. sh: Optimize the setup_rt_frame() I-cache flush. sh: Populate initial secondary CPU info from boot_cpu_data. sh: Tidy up SMP cpuinfo. sh: Use boot_cpu_data for FPU tests in sigcontext paths. sh: ftrace: Fix up syscall tracepoint support. sh: force dcache flush if dcache_dirty bit set. sh: update die() output.
2009-10-15Merge branch 'sched-fixes-for-linus' of ↵Linus Torvalds2-3/+0
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: sched: Fix missing kernel-doc notation Revert "x86, timers: Check for pending timers after (device) interrupts" sched: Update the clock of runqueue select_task_rq() selected
2009-10-15Merge branch 'x86-fixes-for-linus' of ↵Linus Torvalds7-33/+37
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86/paravirt: Use normal calling sequences for irq enable/disable x86: fix kernel panic on 32 bits when profiling x86: Fix Suspend to RAM freeze on Acer Aspire 1511Lmi laptop x86, vmi: Mark VMI deprecated and schedule it for removal
2009-10-15x86: linker script syntax nitsRoland McGrath2-11/+10
The linker scripts grew some use of weirdly wrong linker script syntax. It happens to work, but it's not what the syntax is documented to be. Clean it up to use the official syntax. Signed-off-by: Roland McGrath <roland@redhat.com> CC: Ian Lance Taylor <iant@google.com>
2009-10-14omap: McBSP: Fix incorrect receiver stop in omap_mcbsp_stopJarkko Nikula1-1/+1
This small typo written by author causes that McBSP receiver is disabled on OMAP2430 and OMAP3430 even if only transmitter is stopped. This was noted with ALSA SoC where simultaneous recording halted if playback was stopped first. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-10-14omap: Initialization of SDRC params on Zoom2Teerth Reddy1-1/+3
This patch initializes the correct SDRC settings required for DVFS on Zoom2. Signed-off-by: Teerth Reddy <teerth@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-10-14omap: RX-51: Drop I2C-1 speed to 2200Aaro Koskinen1-1/+1
The I2C-1 bus frequency on RX-51 should be 2.2 MHz. The speed is limited by TWL5030/GAIA; a higher speed could lead to errors on the interface. The maximum speed depends on the system clock for GAIA: 2.2 MHz (if 19.2 MHz), 2.4 MHz (26 MHz) or 2.9 MHz (38.4 MHz). Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-10-14omap: SDMA: Fixing bug in omap_dma_set_global_params()Anuj Aggarwal1-6/+9
Argument tparams was not being used to program global register GCR.HI_THREAD_RESERVED. This patch fixes the same. Signed-off-by: Anuj Aggarwal <anuj.aggarwal@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-10-14omap: CONFIG_ISP1301_OMAP redefined in Beagle defconfigSanjeev Premi1-1/+0
The symbol CONFIG_ISP1301_OMAP was defined twice in the defconfig. This was causing the warning: arch/arm/configs/omap3_beagle_defconfig:972:warning: override: reassigning to symbol ISP1301_OMAP Signed-off-by: Sanjeev Premi <premi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-10-14x86, perf_event: Rename 'performance counter interrupt'Li Hong1-2/+2
In 'cdd6c482c9ff9c55475ee7392ec8f672eddb7be6', we renamed Performance Counters -> Performance Events. The name showed up in /proc/interrupts also needs a change. I use PMI (Performance monitoring interrupt) here, since it is the official name used in Intel's documents. Signed-off-by: Li Hong <lihong.hi@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <20091014105039.GA22670@uhli> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-14[S390] Add highgprs facility to /proc/cpuinfoAndreas Krebbel1-3/+3
This patch makes the hwcap bit for the high gprs feature to be visible in /proc/cpuinfo. Signed-off-by: Andreas Krebbel <Andreas.Krebbel@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-10-14[S390] hypfs: Use subcode 6 if subcode 7 is not availableMichael Holzheu1-1/+1
Hypfs never worked on systems that only provide D204 subcode 6. In these cases we nevertheless used subcode 7. With this fix, we use subcode 6, if it is available and the system does not provide subcode 7. Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-10-14sh: Fix a TRACE_IRQS_OFF typo.Paul Mundt1-1/+1
The resume_userspace path had TRACE_IRQS_OFF written incorrectly and so never handled the transition properly. This was fixed once before but seems to have made it back in the tree. Fix it for good. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-14sh: Optimize the setup_rt_frame() I-cache flush.Paul Mundt1-2/+1
This only needs to flush the return code via the legacy path, and just invalidates uselessly otherwise. This makes the behaviour consistent for all of the trampoline setup paths. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-14sh: Populate initial secondary CPU info from boot_cpu_data.Paul Mundt1-0/+2
The secondary CPU info was seeing corrupted results due to not entering all of the setup paths taken by the boot CPU. So we just memcpy() the boot cpu data over directly, and then fix up the per-CPU bits. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-14sh: Tidy up SMP cpuinfo.Paul Mundt1-0/+2
Trivial change for cleaning up the cpuinfo pretty printing on SMP, adds a newline between CPUs. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-14sh: Use boot_cpu_data for FPU tests in sigcontext paths.Paul Mundt1-3/+3
We do not want to use smp_processor_id() from these paths, as they trip preempt BUGs. Switch the test over to the boot cpu directly. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-14powerpc/pci: Fix MODPOST warningHeiko Schocher1-1/+1
making a powerpc target with PCI support, shows the following warning: MODPOST vmlinux.o WARNING: vmlinux.o(.text+0x10430): Section mismatch in reference from the function pcibios_allocate_bus_resources() to the function .init.text:reparent_resources() The function pcibios_allocate_bus_resources() references the function __init reparent_resources(). This is often because pcibios_allocate_bus_resources lacks a __init annotation or the annotation of reparent_resources is wrong. This patch fix this warning by removing the __init annotation before reparent_resources. Signed-off-by: Heiko Schocher <hs@denx.de> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-26 23:14:21 +0300