summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)AuthorFilesLines
2019-05-07Merge branches 'clk-doc', 'clk-more-critical', 'clk-meson' and ↵Stephen Boyd1-3/+6
'clk-basic-be' into clk-next - Remove clk_readl() and introduce BE versions of basic clk types * clk-doc: clk: Drop duplicate clk_register() documentation clk: Document and simplify clk_core_get_rate_nolock() clk: Remove 'flags' member of struct clk_fixed_rate clk: nxp: Drop 'flags' on fixed_rate clk macro clk: Document __clk_mux_determine_rate() clk: Document CLK_MUX_READ_ONLY mux flag clk: Document deprecated things clk: Collapse gpio clk kerneldoc * clk-more-critical: clk: highbank: Convert to CLK_IS_CRITICAL * clk-meson: (21 commits) clk: meson: axg-audio: add g12a support clk: meson: axg-audio: don't register inputs in the onecell data clk: meson: axg_audio: replace prefix axg by aud dt-bindings: clk: axg-audio: add g12a support clk: meson: meson8b: add the video decoder clock trees clk: meson: meson8b: add the VPU clock trees clk: meson: meson8b: add support for the GP_PLL clock on Meson8m2 clk: meson: meson8b: use a separate clock table for Meson8m2 dt-bindings: clock: meson8b: export the video decoder clocks clk: meson-g12a: add video decoder clocks dt-bindings: clock: meson8b: export the VPU clock clk: meson-g12a: add PCIE PLL clocks dt-bindings: clock: g12a-aoclk: expose CLKID_AO_CTS_OSCIN clk: meson-pll: add reduced specific clk_ops for G12A PCIe PLL dt-bindings: clock: meson8b: drop the "ABP" clock definition clk: meson: g12a: add cpu clocks dt-bindings: clk: g12a-clkc: add VDEC clock IDs dt-bindings: clock: axg-audio: unexpose controller inputs dt-bindings: clk: g12a-clkc: add PCIE PLL clock ID clk: g12a-aoclk: re-export CLKID_AO_SAR_ADC_SEL clock id ... * clk-basic-be: clk: core: replace clk_{readl,writel} with {readl,writel} clk: core: remove powerpc special handling powerpc/512x: mark clocks as big endian clk: mux: add explicit big endian support clk: multiplier: add explicit big endian support clk: gate: add explicit big endian support clk: fractional-divider: add explicit big endian support clk: divider: add explicit big endian support
2019-05-06Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds3-8/+116
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Ingo Molnar: "I'd like to apologize for this very late pull request: I was dithering through the week whether to send the fixes, and then yesterday Jiri's crash fix for a regression introduced in this cycle clearly marked perf/urgent as 'must merge now'. Most of the commits are tooling fixes, plus there's three kernel fixes via four commits: - race fix in the Intel PEBS code - fix an AUX bug and roll back a previous attempt - fix AMD family 17h generic HW cache-event perf counters The largest diffstat contribution comes from the AMD fix - a new event table is introduced, which is a fairly low risk change but has a large linecount" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/intel: Fix race in intel_pmu_disable_event() perf/x86/intel/pt: Remove software double buffering PMU capability perf/ring_buffer: Fix AUX software double buffering perf tools: Remove needless asm/unistd.h include fixing build in some places tools arch uapi: Copy missing unistd.h headers for arc, hexagon and riscv tools build: Add -ldl to the disassembler-four-args feature test perf cs-etm: Always allocate memory for cs_etm_queue::prev_packet perf cs-etm: Don't check cs_etm_queue::prev_packet validity perf report: Report OOM in status line in the GTK UI perf bench numa: Add define for RUSAGE_THREAD if not present tools lib traceevent: Change tag string for error perf annotate: Fix build on 32 bit for BPF annotation tools uapi x86: Sync vmx.h with the kernel perf bpf: Return value with unlocking in perf_env__find_btf() MAINTAINERS: Include vendor specific files under arch/*/events/* perf/x86/amd: Update generic hardware cache events for Family 17h
2019-05-06Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds1-0/+12
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fix from Ingo Molnar: "Disable function tracing during early SME setup to fix a boot crash on SME-enabled kernels running distro kernels (some of which have function tracing enabled)" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mm/mem_encrypt: Disable all instrumentation for early SME setup
2019-05-05perf/x86/intel: Fix race in intel_pmu_disable_event()Jiri Olsa1-3/+7
New race in x86_pmu_stop() was introduced by replacing the atomic __test_and_clear_bit() of cpuc->active_mask by separate test_bit() and __clear_bit() calls in the following commit: 3966c3feca3f ("x86/perf/amd: Remove need to check "running" bit in NMI handler") The race causes panic for PEBS events with enabled callchains: BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 ... RIP: 0010:perf_prepare_sample+0x8c/0x530 Call Trace: <NMI> perf_event_output_forward+0x2a/0x80 __perf_event_overflow+0x51/0xe0 handle_pmi_common+0x19e/0x240 intel_pmu_handle_irq+0xad/0x170 perf_event_nmi_handler+0x2e/0x50 nmi_handle+0x69/0x110 default_do_nmi+0x3e/0x100 do_nmi+0x11a/0x180 end_repeat_nmi+0x16/0x1a RIP: 0010:native_write_msr+0x6/0x20 ... </NMI> intel_pmu_disable_event+0x98/0xf0 x86_pmu_stop+0x6e/0xb0 x86_pmu_del+0x46/0x140 event_sched_out.isra.97+0x7e/0x160 ... The event is configured to make samples from PEBS drain code, but when it's disabled, we'll go through NMI path instead, where data->callchain will not get allocated and we'll crash: x86_pmu_stop test_bit(hwc->idx, cpuc->active_mask) intel_pmu_disable_event(event) { ... intel_pmu_pebs_disable(event); ... EVENT OVERFLOW -> <NMI> intel_pmu_handle_irq handle_pmi_common TEST PASSES -> test_bit(bit, cpuc->active_mask)) perf_event_overflow perf_prepare_sample { ... if (!(sample_type & __PERF_SAMPLE_CALLCHAIN_EARLY)) data->callchain = perf_callchain(event, regs); CRASH -> size += data->callchain->nr; } </NMI> ... x86_pmu_disable_event(event) } __clear_bit(hwc->idx, cpuc->active_mask); Fixing this by disabling the event itself before setting off the PEBS bit. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: David Arcari <darcari@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Lendacky Thomas <Thomas.Lendacky@amd.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Fixes: 3966c3feca3f ("x86/perf/amd: Remove need to check "running" bit in NMI handler") Link: http://lkml.kernel.org/r/20190504151556.31031-1-jolsa@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-05-04Merge tag 'powerpc-5.1-7' of ↵Linus Torvalds1-4/+14
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fix from Michael Ellerman: "One regression fix. Changes we merged to STRICT_KERNEL_RWX on 32-bit were causing crashes under load on some machines depending on memory layout. Thanks to Christophe Leroy" * tag 'powerpc-5.1-7' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/32s: Fix BATs setting with CONFIG_STRICT_KERNEL_RWX
2019-05-04Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds13-42/+120
Pull KVM fixes from Paolo Bonzini: - PPC and ARM bugfixes from submaintainers - Fix old Windows versions on AMD (recent regression) - Fix old Linux versions on processors without EPT - Fixes for LAPIC timer optimizations * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (21 commits) KVM: nVMX: Fix size checks in vmx_set_nested_state KVM: selftests: make hyperv_cpuid test pass on AMD KVM: lapic: Check for in-kernel LAPIC before deferencing apic pointer KVM: fix KVM_CLEAR_DIRTY_LOG for memory slots of unaligned size x86/kvm/mmu: reset MMU context when 32-bit guest switches PAE KVM: x86: Whitelist port 0x7e for pre-incrementing %rip Documentation: kvm: fix dirty log ioctl arch lists KVM: VMX: Move RSB stuffing to before the first RET after VM-Exit KVM: arm/arm64: Don't emulate virtual timers on userspace ioctls kvm: arm: Skip stage2 huge mappings for unaligned ipa backed by THP KVM: arm/arm64: Ensure vcpu target is unset on reset failure KVM: lapic: Convert guest TSC to host time domain if necessary KVM: lapic: Allow user to disable adaptive tuning of timer advancement KVM: lapic: Track lapic timer advance per vCPU KVM: lapic: Disable timer advancement if adaptive tuning goes haywire x86: kvm: hyper-v: deal with buggy TLB flush requests from WS2012 KVM: x86: Consider LAPIC TSC-Deadline timer expired if deadline too short KVM: PPC: Book3S: Protect memslots while validating user address KVM: PPC: Book3S HV: Perserve PSSCR FAKE_SUSPEND bit on guest exit KVM: arm/arm64: vgic-v3: Retire pending interrupts on disabling LPIs ...
2019-05-03perf/x86/intel/pt: Remove software double buffering PMU capabilityAlexander Shishkin1-2/+1
Now that all AUX allocations are high-order by default, the software double buffering PMU capability doesn't make sense any more, get rid of it. In case some PMUs choose to opt out, we can re-introduce it. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: adrian.hunter@intel.com Link: http://lkml.kernel.org/r/20190503085536.24119-3-alexander.shishkin@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-05-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds1-2/+3
Pull networking fixes from David Miller: 1) Out of bounds access in xfrm IPSEC policy unlink, from Yue Haibing. 2) Missing length check for esp4 UDP encap, from Sabrina Dubroca. 3) Fix byte order of RX STBC access in mac80211, from Johannes Berg. 4) Inifnite loop in bpftool map create, from Alban Crequy. 5) Register mark fix in ebpf verifier after pkt/null checks, from Paul Chaignon. 6) Properly use rcu_dereference_sk_user_data in L2TP code, from Eric Dumazet. 7) Buffer overrun in marvell phy driver, from Andrew Lunn. 8) Several crash and statistics handling fixes to bnxt_en driver, from Michael Chan and Vasundhara Volam. 9) Several fixes to the TLS layer from Jakub Kicinski (copying negative amounts of data in reencrypt, reencrypt frag copying, blind nskb->sk NULL deref, etc). 10) Several UDP GRO fixes, from Paolo Abeni and Eric Dumazet. 11) PID/UID checks on ipv6 flow labels are inverted, from Willem de Bruijn. 12) Use after free in l2tp, from Eric Dumazet. 13) IPV6 route destroy races, also from Eric Dumazet. 14) SCTP state machine can erroneously run recursively, fix from Xin Long. 15) Adjust AF_PACKET msg_name length checks, add padding bytes if necessary. From Willem de Bruijn. 16) Preserve skb_iif, so that forwarded packets have consistent values even if fragmentation is involved. From Shmulik Ladkani. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (69 commits) udp: fix GRO packet of death ipv6: A few fixes on dereferencing rt->from rds: ib: force endiannes annotation selftests: fib_rule_tests: print the result and return 1 if any tests failed ipv4: ip_do_fragment: Preserve skb_iif during fragmentation net/tls: avoid NULL pointer deref on nskb->sk in fallback selftests: fib_rule_tests: Fix icmp proto with ipv6 packet: validate msg_namelen in send directly packet: in recvmsg msg_name return at least sizeof sockaddr_ll sctp: avoid running the sctp state machine recursively stmmac: pci: Fix typo in IOT2000 comment Documentation: fix netdev-FAQ.rst markup warning ipv6: fix races in ip6_dst_destroy() l2ip: fix possible use-after-free appletalk: Set error code if register_snap_client failed net: dsa: bcm_sf2: fix buffer overflow doing set_rxnfc rxrpc: Fix net namespace cleanup ipv6/flowlabel: wait rcu grace period before put_pid() vrf: Use orig netdev to count Ip6InNoRoutes and a fresh route lookup when sending dest unreach tcp: add sanity tests in tcp_add_backlog() ...
2019-05-02perf/x86/amd: Update generic hardware cache events for Family 17hKim Phillips1-3/+108
Add a new amd_hw_cache_event_ids_f17h assignment structure set for AMD families 17h and above, since a lot has changed. Specifically: L1 Data Cache The data cache access counter remains the same on Family 17h. For DC misses, PMCx041's definition changes with Family 17h, so instead we use the L2 cache accesses from L1 data cache misses counter (PMCx060,umask=0xc8). For DC hardware prefetch events, Family 17h breaks compatibility for PMCx067 "Data Prefetcher", so instead, we use PMCx05a "Hardware Prefetch DC Fills." L1 Instruction Cache PMCs 0x80 and 0x81 (32-byte IC fetches and misses) are backward compatible on Family 17h. For prefetches, we remove the erroneous PMCx04B assignment which counts how many software data cache prefetch load instructions were dispatched. LL - Last Level Cache Removing PMCs 7D, 7E, and 7F assignments, as they do not exist on Family 17h, where the last level cache is L3. L3 counters can be accessed using the existing AMD Uncore driver. Data TLB On Intel machines, data TLB accesses ("dTLB-loads") are assigned to counters that count load/store instructions retired. This is inconsistent with instruction TLB accesses, where Intel implementations report iTLB misses that hit in the STLB. Ideally, dTLB-loads would count higher level dTLB misses that hit in lower level TLBs, and dTLB-load-misses would report those that also missed in those lower-level TLBs, therefore causing a page table walk. That would be consistent with instruction TLB operation, remove the redundancy between dTLB-loads and L1-dcache-loads, and prevent perf from producing artificially low percentage ratios, i.e. the "0.01%" below: 42,550,869 L1-dcache-loads 41,591,860 dTLB-loads 4,802 dTLB-load-misses # 0.01% of all dTLB cache hits 7,283,682 L1-dcache-stores 7,912,392 dTLB-stores 310 dTLB-store-misses On AMD Families prior to 17h, the "Data Cache Accesses" counter is used, which is slightly better than load/store instructions retired, but still counts in terms of individual load/store operations instead of TLB operations. So, for AMD Families 17h and higher, this patch assigns "dTLB-loads" to a counter for L1 dTLB misses that hit in the L2 dTLB, and "dTLB-load-misses" to a counter for L1 DTLB misses that caused L2 DTLB misses and therefore also caused page table walks. This results in a much more accurate view of data TLB performance: 60,961,781 L1-dcache-loads 4,601 dTLB-loads 963 dTLB-load-misses # 20.93% of all dTLB cache hits Note that for all AMD families, data loads and stores are combined in a single accesses counter, so no 'L1-dcache-stores' are reported separately, and stores are counted with loads in 'L1-dcache-loads'. Also note that the "% of all dTLB cache hits" string is misleading because (a) "dTLB cache": although TLBs can be considered caches for page tables, in this context, it can be misinterpreted as data cache hits because the figures are similar (at least on Intel), and (b) not all those loads (technically accesses) technically "hit" at that hardware level. "% of all dTLB accesses" would be more clear/accurate. Instruction TLB On Intel machines, 'iTLB-loads' measure iTLB misses that hit in the STLB, and 'iTLB-load-misses' measure iTLB misses that also missed in the STLB and completed a page table walk. For AMD Family 17h and above, for 'iTLB-loads' we replace the erroneous instruction cache fetches counter with PMCx084 "L1 ITLB Miss, L2 ITLB Hit". For 'iTLB-load-misses' we still use PMCx085 "L1 ITLB Miss, L2 ITLB Miss", but set a 0xff umask because without it the event does not get counted. Branch Predictor (BPU) PMCs 0xc2 and 0xc3 continue to be valid across all AMD Families. Node Level Events Family 17h does not have a PMCx0e9 counter, and corresponding counters have not been made available publicly, so for now, we mark them as unsupported for Families 17h and above. Reference: "Open-Source Register Reference For AMD Family 17h Processors Models 00h-2Fh" Released 7/17/2018, Publication #56255, Revision 3.03: https://www.amd.com/system/files/TechDocs/56255_OSRR.pdf [ mingo: tidied up the line breaks. ] Signed-off-by: Kim Phillips <kim.phillips@amd.com> Cc: <stable@vger.kernel.org> # v4.9+ Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Janakarajan Natarajan <Janakarajan.Natarajan@amd.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Martin Liška <mliska@suse.cz> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Pu Wen <puwen@hygon.cn> Cc: Stephane Eranian <eranian@google.com> Cc: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Thomas Lendacky <Thomas.Lendacky@amd.com> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: linux-kernel@vger.kernel.org Cc: linux-perf-users@vger.kernel.org Fixes: e40ed1542dd7 ("perf/x86: Add perf support for AMD family-17h processors") Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-05-02powerpc/32s: Fix BATs setting with CONFIG_STRICT_KERNEL_RWXChristophe Leroy1-4/+14
Serge reported some crashes with CONFIG_STRICT_KERNEL_RWX enabled on a book3s32 machine. Analysis shows two issues: - BATs addresses and sizes are not properly aligned. - There is a gap between the last address covered by BATs and the first address covered by pages. Memory mapped with DBATs: 0: 0xc0000000-0xc07fffff 0x00000000 Kernel RO coherent 1: 0xc0800000-0xc0bfffff 0x00800000 Kernel RO coherent 2: 0xc0c00000-0xc13fffff 0x00c00000 Kernel RW coherent 3: 0xc1400000-0xc23fffff 0x01400000 Kernel RW coherent 4: 0xc2400000-0xc43fffff 0x02400000 Kernel RW coherent 5: 0xc4400000-0xc83fffff 0x04400000 Kernel RW coherent 6: 0xc8400000-0xd03fffff 0x08400000 Kernel RW coherent 7: 0xd0400000-0xe03fffff 0x10400000 Kernel RW coherent Memory mapped with pages: 0xe1000000-0xefffffff 0x21000000 240M rw present dirty accessed This patch fixes both issues. With the patch, we get the following which is as expected: Memory mapped with DBATs: 0: 0xc0000000-0xc07fffff 0x00000000 Kernel RO coherent 1: 0xc0800000-0xc0bfffff 0x00800000 Kernel RO coherent 2: 0xc0c00000-0xc0ffffff 0x00c00000 Kernel RW coherent 3: 0xc1000000-0xc1ffffff 0x01000000 Kernel RW coherent 4: 0xc2000000-0xc3ffffff 0x02000000 Kernel RW coherent 5: 0xc4000000-0xc7ffffff 0x04000000 Kernel RW coherent 6: 0xc8000000-0xcfffffff 0x08000000 Kernel RW coherent 7: 0xd0000000-0xdfffffff 0x10000000 Kernel RW coherent Memory mapped with pages: 0xe0000000-0xefffffff 0x20000000 256M rw present dirty accessed Fixes: 63b2bc619565 ("powerpc/mm/32s: Use BATs for STRICT_KERNEL_RWX") Reported-by: Serge Belyshev <belyshev@depni.sinp.msu.ru> Acked-by: Segher Boessenkool <segher@kernel.crashing.org> Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-05-01Merge tag 'arc-5.1-final' of ↵Linus Torvalds3-23/+25
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc Pull ARC fixes from Vineet Gupta: "A few minor fixes for ARC. - regression in memset if line size !64 - avoid panic if PAE and IOC" * tag 'arc-5.1-final' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: ARC: memset: fix build with L1_CACHE_SHIFT != 6 ARC: [hsdk] Make it easier to add PAE40 region to DTB ARC: PAE40: don't panic and instead turn off hw ioc
2019-05-01gcc-9: properly declare the {pv,hv}clock_page storageLinus Torvalds1-2/+2
The pvlock_page and hvclock_page variables are (as the name implies) addresses to pages, created by the linker script. But we declared them as just "extern u8" variables, which _works_, but now that gcc does some more bounds checking, it causes warnings like warning: array subscript 1 is outside array bounds of ‘u8[1]’ when we then access more than one byte from those variables. Fix this by simply making the declaration of the variables match reality, which makes the compiler happy too. Signed-off-by: Linus Torvalds <torvalds@-linux-foundation.org>
2019-05-01KVM: nVMX: Fix size checks in vmx_set_nested_stateJim Mattson1-2/+2
The size checks in vmx_nested_state are wrong because the calculations are made based on the size of a pointer to a struct kvm_nested_state rather than the size of a struct kvm_nested_state. Reported-by: Felix Wilhelm <fwilhelm@google.com> Signed-off-by: Jim Mattson <jmattson@google.com> Reviewed-by: Drew Schmitt <dasch@google.com> Reviewed-by: Marc Orr <marcorr@google.com> Reviewed-by: Peter Shier <pshier@google.com> Reviewed-by: Krish Sadhukhan <krish.sadhukhan@oracle.com> Fixes: 8fcc4b5923af5de58b80b53a069453b135693304 Cc: stable@ver.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-04-30KVM: lapic: Check for in-kernel LAPIC before deferencing apic pointerSean Christopherson2-4/+2
...to avoid dereferencing a null pointer when querying the per-vCPU timer advance. Fixes: 39497d7660d98 ("KVM: lapic: Track lapic timer advance per vCPU") Reported-by: syzbot+f7e65445a40d3e0e4ebf@syzkaller.appspotmail.com Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-04-30x86/kvm/mmu: reset MMU context when 32-bit guest switches PAEVitaly Kuznetsov2-0/+2
Commit 47c42e6b4192 ("KVM: x86: fix handling of role.cr4_pae and rename it to 'gpte_size'") introduced a regression: 32-bit PAE guests stopped working. The issue appears to be: when guest switches (enables) PAE we need to re-initialize MMU context (set context->root_level, do reset_rsvds_bits_mask(), ...) but init_kvm_tdp_mmu() doesn't do that because we threw away is_pae(vcpu) flag from mmu role. Restore it to kvm_mmu_extended_role (as we now don't need it in base role) to fix the issue. Fixes: 47c42e6b4192 ("KVM: x86: fix handling of role.cr4_pae and rename it to 'gpte_size'") Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-04-30KVM: x86: Whitelist port 0x7e for pre-incrementing %ripSean Christopherson2-2/+20
KVM's recent bug fix to update %rip after emulating I/O broke userspace that relied on the previous behavior of incrementing %rip prior to exiting to userspace. When running a Windows XP guest on AMD hardware, Qemu may patch "OUT 0x7E" instructions in reaction to the OUT itself. Because KVM's old behavior was to increment %rip before exiting to userspace to handle the I/O, Qemu manually adjusted %rip to account for the OUT instruction. Arguably this is a userspace bug as KVM requires userspace to re-enter the kernel to complete instruction emulation before taking any other actions. That being said, this is a bit of a grey area and breaking userspace that has worked for many years is bad. Pre-increment %rip on OUT to port 0x7e before exiting to userspace to hack around the issue. Fixes: 45def77ebf79e ("KVM: x86: update %rip after emulating IO") Reported-by: Simon Becherer <simon@becherer.de> Reported-and-tested-by: Iakov Karpov <srid@rkmail.ru> Reported-by: Gabriele Balducci <balducci@units.it> Reported-by: Antti Antinoja <reader@fennosys.fi> Cc: stable@vger.kernel.org Cc: Takashi Iwai <tiwai@suse.com> Cc: Jiri Slaby <jslaby@suse.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-04-30x86/mm/mem_encrypt: Disable all instrumentation for early SME setupGary Hook1-0/+12
Enablement of AMD's Secure Memory Encryption feature is determined very early after start_kernel() is entered. Part of this procedure involves scanning the command line for the parameter 'mem_encrypt'. To determine intended state, the function sme_enable() uses library functions cmdline_find_option() and strncmp(). Their use occurs early enough such that it cannot be assumed that any instrumentation subsystem is initialized. For example, making calls to a KASAN-instrumented function before KASAN is set up will result in the use of uninitialized memory and a boot failure. When AMD's SME support is enabled, conditionally disable instrumentation of these dependent functions in lib/string.c and arch/x86/lib/cmdline.c. [ bp: Get rid of intermediary nostackp var and cleanup whitespace. ] Fixes: aca20d546214 ("x86/mm: Add support to make use of Secure Memory Encryption") Reported-by: Li RongQing <lirongqing@baidu.com> Signed-off-by: Gary R Hook <gary.hook@amd.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Boris Brezillon <bbrezillon@kernel.org> Cc: Coly Li <colyli@suse.de> Cc: "dave.hansen@linux.intel.com" <dave.hansen@linux.intel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Kees Cook <keescook@chromium.org> Cc: Kent Overstreet <kent.overstreet@gmail.com> Cc: "luto@kernel.org" <luto@kernel.org> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: "mingo@redhat.com" <mingo@redhat.com> Cc: "peterz@infradead.org" <peterz@infradead.org> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: x86-ml <x86@kernel.org> Link: https://lkml.kernel.org/r/155657657552.7116.18363762932464011367.stgit@sosrh3.amd.com
2019-04-29x86: make ZERO_PAGE() at least parse its argumentLinus Torvalds1-1/+1
This doesn't really do anything, but at least we now parse teh ZERO_PAGE() address argument so that we'll catch the most obvious errors in usage next time they'll happen. See commit 6a5c5d26c4c6 ("rdma: fix build errors on s390 and MIPS due to bad ZERO_PAGE use") what happens when we don't have any use of the macro argument at all. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-04-28Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-armLinus Torvalds4-6/+20
Pull ARM fixes from Russell King: "A small number of ARM fixes - Fix function tracer and unwinder dependencies so that we don't end up building kernels that will crash - Fix ARMv7M nommu initialisation (missing register initialisation) - Fix EFI decompressor entry (ensuring barrier instructions are enabled prior to use)" * tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: 8857/1: efi: enable CP15 DMB instructions before cleaning the cache ARM: 8856/1: NOMMU: Fix CCR register faulty initialization when MPU is disabled ARM: fix function graph tracer and unwinder dependencies
2019-04-28Merge tag 'powerpc-5.1-6' of ↵Linus Torvalds3-40/+60
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: "A one-liner to make our Radix MMU support depend on HUGETLB_PAGE. We use some of the hugetlb inlines (eg. pud_huge()) when operating on the linear mapping and if they're compiled into empty wrappers we can corrupt memory. Then two fixes to our VFIO IOMMU code. The first is not a regression but fixes the locking to avoid a user-triggerable deadlock. The second does fix a regression since rc1, and depends on the first fix. It makes it possible to run guests with large amounts of memory again (~256GB). Thanks to Alexey Kardashevskiy" * tag 'powerpc-5.1-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/mm_iommu: Allow pinning large regions powerpc/mm_iommu: Fix potential deadlock powerpc/mm/radix: Make Radix require HUGETLB_PAGE
2019-04-27Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds2-1/+7
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar: - Fix an early boot crash in the RSDP parsing code by effectively turning off the parsing call - we ran out of time but want to fix the regression. The more involved fix is being worked on. - Fix a crash that can trigger in the kmemlek code. * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mm: Fix a crash with kmemleak_scan() x86/boot: Disable RSDP parsing temporarily
2019-04-27Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds1-5/+5
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fix from Ingo Molnar: "A cstate event enumeration fix for Kaby/Coffee Lake CPUs" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/intel: Update KBL Package C-state events to also include PC8/PC9/PC10 counters
2019-04-27KVM: VMX: Move RSB stuffing to before the first RET after VM-ExitRick Edgecombe2-3/+12
The not-so-recent change to move VMX's VM-Exit handing to a dedicated "function" unintentionally exposed KVM to a speculative attack from the guest by executing a RET prior to stuffing the RSB. Make RSB stuffing happen immediately after VM-Exit, before any unpaired returns. Alternatively, the VM-Exit path could postpone full RSB stuffing until its current location by stuffing the RSB only as needed, or by avoiding returns in the VM-Exit path entirely, but both alternatives are beyond ugly since vmx_vmexit() has multiple indirect callers (by way of vmx_vmenter()). And putting the RSB stuffing immediately after VM-Exit makes it much less likely to be re-broken in the future. Note, the cost of PUSH/POP could be avoided in the normal flow by pairing the PUSH RAX with the POP RAX in __vmx_vcpu_run() and adding an a POP to nested_vmx_check_vmentry_hw(), but such a weird/subtle dependency is likely to cause problems in the long run, and PUSH/POP will take all of a few cycles, which is peanuts compared to the number of cycles required to fill the RSB. Fixes: 453eafbe65f7 ("KVM: VMX: Move VM-Enter + VM-Exit handling to non-inline sub-routines") Reported-by: Rick Edgecombe <rick.p.edgecombe@intel.com> Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com> Co-developed-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-04-26Merge tag 'arm64-fixes' of ↵Linus Torvalds2-3/+8
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Catalin Marinas: - keep the tail of an unaligned initrd reserved - adjust ftrace_make_call() to deal with the relative nature of PLTs * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64/module: ftrace: deal with place relative nature of PLTs arm64: mm: Ensure tail of unaligned initrd is reserved
2019-04-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller1-2/+3
Alexei Starovoitov says: ==================== pull-request: bpf 2019-04-25 The following pull-request contains BPF updates for your *net* tree. The main changes are: 1) the bpf verifier fix to properly mark registers in all stack frames, from Paul. 2) preempt_enable_no_resched->preempt_enable fix, from Peter. 3) other misc fixes. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-26MIPS: eBPF: Make ebpf_to_mips_reg() staticYueHaibing1-2/+3
Fix sparse warning: arch/mips/net/ebpf_jit.c:196:5: warning: symbol 'ebpf_to_mips_reg' was not declared. Should it be static? Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Yonghong Song <yhs@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-04-25perf/x86/intel: Update KBL Package C-state events to also include ↵Harry Pan1-5/+5
PC8/PC9/PC10 counters Kaby Lake (and Coffee Lake) has PC8/PC9/PC10 residency counters. This patch updates the list of Kaby/Coffee Lake PMU event counters from the snb_cstates[] list of events to the hswult_cstates[] list of events, which keeps all previously supported events and also adds the PKG_C8, PKG_C9 and PKG_C10 residency counters. This allows user space tools to profile them through the perf interface. Signed-off-by: Harry Pan <harry.pan@intel.com> Cc: <stable@vger.kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: gs0622@gmail.com Link: http://lkml.kernel.org/r/20190424145033.1924-1-harry.pan@intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-04-24x86/mm: Fix a crash with kmemleak_scan()Qian Cai1-0/+6
The first kmemleak_scan() call after boot would trigger the crash below because this callpath: kernel_init free_initmem mem_encrypt_free_decrypted_mem free_init_pages unmaps memory inside the .bss when DEBUG_PAGEALLOC=y. kmemleak_init() will register the .data/.bss sections and then kmemleak_scan() will scan those addresses and dereference them looking for pointer references. If free_init_pages() frees and unmaps pages in those sections, kmemleak_scan() will crash if referencing one of those addresses: BUG: unable to handle kernel paging request at ffffffffbd402000 CPU: 12 PID: 325 Comm: kmemleak Not tainted 5.1.0-rc4+ #4 RIP: 0010:scan_block Call Trace: scan_gray_list kmemleak_scan kmemleak_scan_thread kthread ret_from_fork Since kmemleak_free_part() is tolerant to unknown objects (not tracked by kmemleak), it is fine to call it from free_init_pages() even if not all address ranges passed to this function are known to kmemleak. [ bp: Massage. ] Fixes: b3f0907c71e0 ("x86/mm: Add .bss..decrypted section to hold shared variables") Signed-off-by: Qian Cai <cai@lca.pw> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Brijesh Singh <brijesh.singh@amd.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: x86-ml <x86@kernel.org> Link: https://lkml.kernel.org/r/20190423165811.36699-1-cai@lca.pw
2019-04-23Merge tag 'syscalls-5.1' of ↵Linus Torvalds16-1/+65
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic Pull syscall numbering updates from Arnd Bergmann: "arch: add pidfd and io_uring syscalls everywhere This comes a bit late, but should be in 5.1 anyway: we want the newly added system calls to be synchronized across all architectures in the release. I hope that in the future, any newly added system calls can be added to all architectures at the same time, and tested there while they are in linux-next, avoiding dependencies between the architecture maintainer trees and the tree that contains the new system call" * tag 'syscalls-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: arch: add pidfd and io_uring syscalls everywhere
2019-04-23powerpc/512x: mark clocks as big endianJonas Gorski1-3/+6
These clocks' registers are accessed as big endian, so mark them as such. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-23ARM: 8857/1: efi: enable CP15 DMB instructions before cleaning the cacheArd Biesheuvel1-1/+15
The EFI stub is entered with the caches and MMU enabled by the firmware, and once the stub is ready to hand over to the decompressor, we clean and disable the caches. The cache clean routines use CP15 barrier instructions, which can be disabled via SCTLR. Normally, when using the provided cache handling routines to enable the caches and MMU, this bit is enabled as well. However, but since we entered the stub with the caches already enabled, this routine is not executed before we call the cache clean routines, resulting in undefined instruction exceptions if the firmware never enabled this bit. So set the bit explicitly in the EFI entry code, but do so in a way that guarantees that the resulting code can still run on v6 cores as well (which are guaranteed to have CP15 barriers enabled) Cc: <stable@vger.kernel.org> # v4.9+ Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2019-04-23ARM: 8856/1: NOMMU: Fix CCR register faulty initialization when MPU is disabledTigran Tadevosyan1-1/+1
When CONFIG_ARM_MPU is not defined, the base address of v7M SCB register is not initialized with correct value. This prevents enabling I/D caches when the L1 cache poilcy is applied in kernel. Fixes: 3c24121039c9da14692eb48f6e39565b28c0f3cf ("ARM: 8756/1: NOMMU: Postpone MPU activation till __after_proc_init") Signed-off-by: Tigran Tadevosyan <tigran.tadevosyan@arm.com> Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2019-04-23ARM: fix function graph tracer and unwinder dependenciesRussell King2-4/+4
Naresh Kamboju recently reported that the function-graph tracer crashes on ARM. The function-graph tracer assumes that the kernel is built with frame pointers. We explicitly disabled the function-graph tracer when building Thumb2, since the Thumb2 ABI doesn't have frame pointers. We recently changed the way the unwinder method was selected, which seems to have made it more likely that we can end up with the function- graph tracer enabled but without the kernel built with frame pointers. Fix up the function graph tracer dependencies so the option is not available when we have no possibility of having frame pointers, and adjust the dependencies on the unwinder option to hide the non-frame pointer unwinder options if the function-graph tracer is enabled. Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org> Tested-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2019-04-23arm64/module: ftrace: deal with place relative nature of PLTsArd Biesheuvel1-2/+7
Another bodge for the ftrace PLT code: plt_entries_equal() now takes the place relative nature of the ADRP/ADD based PLT entries into account, which means that a struct trampoline instance on the stack is no longer equal to the same set of opcodes in the module struct, given that they don't point to the same place in memory anymore. Work around this by using memcmp() in the ftrace PLT handling code. Acked-by: Will Deacon <will.deacon@arm.com> Tested-by: dann frazier <dann.frazier@canonical.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2019-04-23arm64: mm: Ensure tail of unaligned initrd is reservedBjorn Andersson1-1/+1
In the event that the start address of the initrd is not aligned, but has an aligned size, the base + size will not cover the entire initrd image and there is a chance that the kernel will corrupt the tail of the image. By aligning the end of the initrd to a page boundary and then subtracting the adjusted start address the memblock reservation will cover all pages that contains the initrd. Fixes: c756c592e442 ("arm64: Utilize phys_initrd_start/phys_initrd_size") Cc: stable@vger.kernel.org Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2019-04-22Merge tag 'mips_fixes_5.1_3' of ↵Linus Torvalds2-7/+1
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux Pull MIPS fixes from Paul Burton: "A couple more MIPS fixes: - Fix indirect syscall tracing & seccomp filtering for big endian MIPS64 kernels, which previously loaded the syscall number incorrectly & would always use zero. - Fix performance counter IRQ setup for Atheros/ath79 SoCs, allowing perf to function on those systems. And not really a fix, but a useful addition: - Add a Broadcom mailing list to the MAINTAINERS entry for BMIPS systems to allow relevant engineers to track patch submissions" * tag 'mips_fixes_5.1_3' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: MIPS: perf: ath79: Fix perfcount IRQ assignment MIPS: scall64-o32: Fix indirect syscall number load MAINTAINERS: BMIPS: Add internal Broadcom mailing list
2019-04-22x86/boot: Disable RSDP parsing temporarilyBorislav Petkov1-1/+1
The original intention to move RDSP parsing very early, before KASLR does its ranges selection, was to accommodate movable memory regions machines (CONFIG_MEMORY_HOTREMOVE) to still be able to do memory hotplug. However, that broke kexec'ing a kernel on EFI machines because depending on where the EFI systab was mapped, on at least one machine it isn't present in the kexec mapping of the second kernel, leading to a triple fault in the early code. Fixing this properly requires significantly involved surgery and we cannot allow ourselves to do that, that close to the merge window. So disable the RSDP parsing code temporarily until it is fixed properly in the next release cycle. Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Baoquan He <bhe@redhat.com> Cc: Chao Fan <fanc.fnst@cn.fujitsu.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: indou.takao@jp.fujitsu.com Cc: Ingo Molnar <mingo@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: kasong@redhat.com Cc: Kees Cook <keescook@chromium.org> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: msys.mizuma@gmail.com Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: x86-ml <x86@kernel.org> Link: https://lkml.kernel.org/r/20190419141952.GE10324@zn.tnic
2019-04-20Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds4-31/+92
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Ingo Molnar: "Misc fixes: - various tooling fixes - kretprobe fixes - kprobes annotation fixes - kprobes error checking fix - fix the default events for AMD Family 17h CPUs - PEBS fix - AUX record fix - address filtering fix" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/kprobes: Avoid kretprobe recursion bug kprobes: Mark ftrace mcount handler functions nokprobe x86/kprobes: Verify stack frame on kretprobe perf/x86/amd: Add event map for AMD Family 17h perf bpf: Return NULL when RB tree lookup fails in perf_env__find_btf() perf tools: Fix map reference counting perf evlist: Fix side band thread draining perf tools: Check maps for bpf programs perf bpf: Return NULL when RB tree lookup fails in perf_env__find_bpf_prog_info() tools include uapi: Sync sound/asound.h copy perf top: Always sample time to satisfy needs of use of ordered queuing perf evsel: Use hweight64() instead of hweight_long(attr.sample_regs_user) tools lib traceevent: Fix missing equality check for strcmp perf stat: Disable DIR_FORMAT feature for 'perf stat record' perf scripts python: export-to-sqlite.py: Fix use of parent_id in calls_view perf header: Fix lock/unlock imbalances when processing BPF/BTF info perf/x86: Fix incorrect PEBS_REGS perf/ring_buffer: Fix AUX record suppression perf/core: Fix the address filtering fix kprobes: Fix error check when reusing optimized probes
2019-04-20Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds11-14/+41
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar: "Misc fixes all over the place: a console spam fix, section attributes fixes, a KASLR fix, a TLB stack-variable alignment fix, a reboot quirk, boot options related warnings fix, an LTO fix, a deadlock fix and an RDT fix" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/cpu/intel: Lower the "ENERGY_PERF_BIAS: Set to normal" message's log priority x86/cpu/bugs: Use __initconst for 'const' init data x86/mm/KASLR: Fix the size of the direct mapping section x86/Kconfig: Fix spelling mistake "effectivness" -> "effectiveness" x86/mm/tlb: Revert "x86/mm: Align TLB invalidation info" x86/reboot, efi: Use EFI reboot for Acer TravelMate X514-51T x86/mm: Prevent bogus warnings with "noexec=off" x86/build/lto: Fix truncated .bss with -fdata-sections x86/speculation: Prevent deadlock on ssb_state::lock x86/resctrl: Do not repeat rdtgroup mode initialization
2019-04-19x86/cpu/intel: Lower the "ENERGY_PERF_BIAS: Set to normal" message's log ↵Hans de Goede1-2/+2
priority The "ENERGY_PERF_BIAS: Set to 'normal', was 'performance'" message triggers on pretty much every Intel machine. The purpose of log messages with a warning level is to notify the user of something which potentially is a problem, or at least somewhat unexpected. This message clearly does not match those criteria, so lower its log priority from warning to info. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20181230172715.17469-1-hdegoede@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-04-19x86/cpu/bugs: Use __initconst for 'const' init dataAndi Kleen1-3/+3
Some of the recently added const tables use __initdata which causes section attribute conflicts. Use __initconst instead. Fixes: fa1202ef2243 ("x86/speculation: Add command line control") Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20190330004743.29541-9-andi@firstfloor.org
2019-04-19x86/kprobes: Avoid kretprobe recursion bugMasami Hiramatsu1-2/+20
Avoid kretprobe recursion loop bg by setting a dummy kprobes to current_kprobe per-CPU variable. This bug has been introduced with the asm-coded trampoline code, since previously it used another kprobe for hooking the function return placeholder (which only has a nop) and trampoline handler was called from that kprobe. This revives the old lost kprobe again. With this fix, we don't see deadlock anymore. And you can see that all inner-called kretprobe are skipped. event_1 235 0 event_2 19375 19612 The 1st column is recorded count and the 2nd is missed count. Above shows (event_1 rec) + (event_2 rec) ~= (event_2 missed) (some difference are here because the counter is racy) Reported-by: Andrea Righi <righi.andrea@gmail.com> Tested-by: Andrea Righi <righi.andrea@gmail.com> Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Acked-by: Steven Rostedt <rostedt@goodmis.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Fixes: c9becf58d935 ("[PATCH] kretprobe: kretprobe-booster") Link: http://lkml.kernel.org/r/155094064889.6137.972160690963039.stgit@devbox Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-04-19x86/kprobes: Verify stack frame on kretprobeMasami Hiramatsu1-0/+26
Verify the stack frame pointer on kretprobe trampoline handler, If the stack frame pointer does not match, it skips the wrong entry and tries to find correct one. This can happen if user puts the kretprobe on the function which can be used in the path of ftrace user-function call. Such functions should not be probed, so this adds a warning message that reports which function should be blacklisted. Tested-by: Andrea Righi <righi.andrea@gmail.com> Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Acked-by: Steven Rostedt <rostedt@goodmis.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/155094059185.6137.15527904013362842072.stgit@devbox Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-04-18Merge tag 'arm64-fixes' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fix from Catalin Marinas: "Avoid compiler uninitialised warning introduced by recent arm64 futex fix" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: futex: Restore oldval initialization to work around buggy compilers
2019-04-18arm64: futex: Restore oldval initialization to work around buggy compilersNathan Chancellor1-1/+1
Commit 045afc24124d ("arm64: futex: Fix FUTEX_WAKE_OP atomic ops with non-zero result value") removed oldval's zero initialization in arch_futex_atomic_op_inuser because it is not necessary. Unfortunately, Android's arm64 GCC 4.9.4 [1] does not agree: ../kernel/futex.c: In function 'do_futex': ../kernel/futex.c:1658:17: warning: 'oldval' may be used uninitialized in this function [-Wmaybe-uninitialized] return oldval == cmparg; ^ In file included from ../kernel/futex.c:73:0: ../arch/arm64/include/asm/futex.h:53:6: note: 'oldval' was declared here int oldval, ret, tmp; ^ GCC fails to follow that when ret is non-zero, futex_atomic_op_inuser returns right away, avoiding the uninitialized use that it claims. Restoring the zero initialization works around this issue. [1]: https://android.googlesource.com/platform/prebuilts/gcc/linux-x86/aarch64/aarch64-linux-android-4.9/ Cc: stable@vger.kernel.org Fixes: 045afc24124d ("arm64: futex: Fix FUTEX_WAKE_OP atomic ops with non-zero result value") Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2019-04-18KVM: lapic: Convert guest TSC to host time domain if necessarySean Christopherson1-3/+21
To minimize the latency of timer interrupts as observed by the guest, KVM adjusts the values it programs into the host timers to account for the host's overhead of programming and handling the timer event. In the event that the adjustments are too aggressive, i.e. the timer fires earlier than the guest expects, KVM busy waits immediately prior to entering the guest. Currently, KVM manually converts the delay from nanoseconds to clock cycles. But, the conversion is done in the guest's time domain, while the delay occurs in the host's time domain. This is perfectly ok when the guest and host are using the same TSC ratio, but if the guest is using a different ratio then the delay may not be accurate and could wait too little or too long. When the guest is not using the host's ratio, convert the delay from guest clock cycles to host nanoseconds and use ndelay() instead of __delay() to provide more accurate timing. Because converting to nanoseconds is relatively expensive, e.g. requires division and more multiplication ops, continue using __delay() directly when guest and host TSCs are running at the same ratio. Cc: Liran Alon <liran.alon@oracle.com> Cc: Wanpeng Li <wanpengli@tencent.com> Cc: stable@vger.kernel.org Fixes: 3b8a5df6c4dc6 ("KVM: LAPIC: Tune lapic_timer_advance_ns automatically") Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-04-18KVM: lapic: Allow user to disable adaptive tuning of timer advancementSean Christopherson3-5/+17
The introduction of adaptive tuning of lapic timer advancement did not allow for the scenario where userspace would want to disable adaptive tuning but still employ timer advancement, e.g. for testing purposes or to handle a use case where adaptive tuning is unable to settle on a suitable time. This is epecially pertinent now that KVM places a hard threshold on the maximum advancment time. Rework the timer semantics to accept signed values, with a value of '-1' being interpreted as "use adaptive tuning with KVM's internal default", and any other value being used as an explicit advancement time, e.g. a time of '0' effectively disables advancement. Note, this does not completely restore the original behavior of lapic_timer_advance_ns. Prior to tracking the advancement per vCPU, which is necessary to support autotuning, userspace could adjust lapic_timer_advance_ns for *running* vCPU. With per-vCPU tracking, the module params are snapshotted at vCPU creation, i.e. applying a new advancement effectively requires restarting a VM. Dynamically updating a running vCPU is possible, e.g. a helper could be added to retrieve the desired delay, choosing between the global module param and the per-VCPU value depending on whether or not auto-tuning is (globally) enabled, but introduces a great deal of complexity. The wrapper itself is not complex, but understanding and documenting the effects of dynamically toggling auto-tuning and/or adjusting the timer advancement is nigh impossible since the behavior would be dependent on KVM's implementation as well as compiler optimizations. In other words, providing stable behavior would require extremely careful consideration now and in the future. Given that the expected use of a manually-tuned timer advancement is to "tune once, run many", use the vastly simpler approach of recognizing changes to the module params only when creating a new vCPU. Cc: Liran Alon <liran.alon@oracle.com> Cc: Wanpeng Li <wanpengli@tencent.com> Reviewed-by: Liran Alon <liran.alon@oracle.com> Cc: stable@vger.kernel.org Fixes: 3b8a5df6c4dc6 ("KVM: LAPIC: Tune lapic_timer_advance_ns automatically") Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-04-18KVM: lapic: Track lapic timer advance per vCPUSean Christopherson5-25/+28
Automatically adjusting the globally-shared timer advancement could corrupt the timer, e.g. if multiple vCPUs are concurrently adjusting the advancement value. That could be partially fixed by using a local variable for the arithmetic, but it would still be susceptible to a race when setting timer_advance_adjust_done. And because virtual_tsc_khz and tsc_scaling_ratio are per-vCPU, the correct calibration for a given vCPU may not apply to all vCPUs. Furthermore, lapic_timer_advance_ns is marked __read_mostly, which is effectively violated when finding a stable advancement takes an extended amount of timer. Opportunistically change the definition of lapic_timer_advance_ns to a u32 so that it matches the style of struct kvm_timer. Explicitly pass the param to kvm_create_lapic() so that it doesn't have to be exposed to lapic.c, thus reducing the probability of unintentionally using the global value instead of the per-vCPU value. Cc: Liran Alon <liran.alon@oracle.com> Cc: Wanpeng Li <wanpengli@tencent.com> Reviewed-by: Liran Alon <liran.alon@oracle.com> Cc: stable@vger.kernel.org Fixes: 3b8a5df6c4dc6 ("KVM: LAPIC: Tune lapic_timer_advance_ns automatically") Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-04-18KVM: lapic: Disable timer advancement if adaptive tuning goes haywireSean Christopherson1-0/+4
To minimize the latency of timer interrupts as observed by the guest, KVM adjusts the values it programs into the host timers to account for the host's overhead of programming and handling the timer event. Now that the timer advancement is automatically tuned during runtime, it's effectively unbounded by default, e.g. if KVM is running as L1 the advancement can measure in hundreds of milliseconds. Disable timer advancement if adaptive tuning yields an advancement of more than 5000ns, as large advancements can break reasonable assumptions of the guest, e.g. that a timer configured to fire after 1ms won't arrive on the next instruction. Although KVM busy waits to mitigate the case of a timer event arriving too early, complications can arise when shifting the interrupt too far, e.g. kvm-unit-test's vmx.interrupt test will fail when its "host" exits on interrupts as KVM may inject the INTR before the guest executes STI+HLT. Arguably the unit test is "broken" in the sense that delaying a timer interrupt by 1ms doesn't technically guarantee the interrupt will arrive after STI+HLT, but it's a reasonable assumption that KVM should support. Furthermore, an unbounded advancement also effectively unbounds the time spent busy waiting, e.g. if the guest programs a timer with a very large delay. 5000ns is a somewhat arbitrary threshold. When running on bare metal, which is the intended use case, timer advancement is expected to be in the general vicinity of 1000ns. 5000ns is high enough that false positives are unlikely, while not being so high as to negatively affect the host's performance/stability. Note, a future patch will enable userspace to disable KVM's adaptive tuning, which will allow priveleged userspace will to specifying an advancement value in excess of this arbitrary threshold in order to satisfy an abnormal use case. Cc: Liran Alon <liran.alon@oracle.com> Cc: Wanpeng Li <wanpengli@tencent.com> Cc: stable@vger.kernel.org Fixes: 3b8a5df6c4dc6 ("KVM: LAPIC: Tune lapic_timer_advance_ns automatically") Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-04-18x86: kvm: hyper-v: deal with buggy TLB flush requests from WS2012Vitaly Kuznetsov1-1/+10
It was reported that with some special Multi Processor Group configuration, e.g: bcdedit.exe /set groupsize 1 bcdedit.exe /set maxgroup on bcdedit.exe /set groupaware on for a 16-vCPU guest WS2012 shows BSOD on boot when PV TLB flush mechanism is in use. Tracing kvm_hv_flush_tlb immediately reveals the issue: kvm_hv_flush_tlb: processor_mask 0x0 address_space 0x0 flags 0x2 The only flag set in this request is HV_FLUSH_ALL_VIRTUAL_ADDRESS_SPACES, however, processor_mask is 0x0 and no HV_FLUSH_ALL_PROCESSORS is specified. We don't flush anything and apparently it's not what Windows expects. TLFS doesn't say anything about such requests and newer Windows versions seem to be unaffected. This all feels like a WS2012 bug, which is, however, easy to workaround in KVM: let's flush everything when we see an empty flush request, over-flushing doesn't hurt. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-21 18:16:06 +0300