| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
[ Upstream commit e6a4eedd49ce27c16a80506c66a04707e0ee0116 ]
RTC interrupt level should be set to "LOW". This was revealed by the
introduction of commit:
f181987ef477 ("rtc: m41t80: use IRQ flags obtained from fwnode")
which changed the way IRQ type is obtained.
Fixes: 56c27310c1b4 ("ARM: dts: imx: Add Advantech BA-16 Qseven module")
Signed-off-by: Ian Ray <ian.ray@gehealthcare.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 9aeed9041929812a10a6d693af050846942a1d16 ]
Similar in nature to ab107276607af90b13a5994997e19b7b9731e251. glibc-2.42
drops the legacy termio struct, but the ioctls.h header still defines some
TC* constants in terms of termio (via sizeof). Hardcode the values instead.
This fixes building Python for example, which falls over like:
./Modules/termios.c:1119:16: error: invalid application of 'sizeof' to incomplete type 'struct termio'
Link: https://bugs.gentoo.org/961769
Link: https://bugs.gentoo.org/962600
Signed-off-by: Sam James <sam@gentoo.org>
Reviewed-by: Magnus Lindholm <linmag7@gmail.com>
Link: https://lore.kernel.org/r/6ebd3451908785cad53b50ca6bc46cfe9d6bc03c.1764922497.git.sam@gentoo.org
Signed-off-by: Magnus Lindholm <linmag7@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit fedadc4137234c3d00c4785eeed3e747fe9036ae ]
gup_pgd_range() is invoked with disabled interrupts and invokes
__kmap_local_page_prot() via pte_offset_map(), gup_p4d_range().
With HIGHPTE enabled, __kmap_local_page_prot() invokes kmap_high_get()
which uses a spinlock_t via lock_kmap_any(). This leads to an
sleeping-while-atomic error on PREEMPT_RT because spinlock_t becomes a
sleeping lock and must not be acquired in atomic context.
The loop in map_new_virtual() uses wait_queue_head_t for wake up which
also is using a spinlock_t.
Since HIGHPTE is rarely needed at all, turn it off for PREEMPT_RT
to allow the use of get_user_pages_fast().
[arnd: rework patch to turn off HIGHPTE instead of HAVE_PAST_GUP]
Co-developed-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0da2ba35c0d532ca0fe7af698b17d74c4d084b9a ]
Let's properly adjust BALLOON_MIGRATE like the other drivers.
Note that the INFLATE/DEFLATE events are triggered from the core when
enqueueing/dequeueing pages.
This was found by code inspection.
Link: https://lkml.kernel.org/r/20251021100606.148294-3-david@redhat.com
Fixes: fe030c9b85e6 ("powerpc/pseries/cmm: Implement balloon compaction")
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 15504b1163007bbfbd9a63460d5c14737c16e96d ]
Let's move the removal of the page from the balloon list into the single
caller, to remove the dependency on the PG_isolated flag and clarify
locking requirements.
Note that for now, balloon_page_delete() was used on two paths:
(1) Removing a page from the balloon for deflation through
balloon_page_list_dequeue()
(2) Removing an isolated page from the balloon for migration in the
per-driver migration handlers. Isolated pages were already removed from
the balloon list during isolation.
So instead of relying on the flag, we can just distinguish both cases
directly and handle it accordingly in the caller.
We'll shuffle the operations a bit such that they logically make more
sense (e.g., remove from the list before clearing flags).
In balloon migration functions we can now move the balloon_page_finalize()
out of the balloon lock and perform the finalization just before dropping
the balloon reference.
Document that the page lock is currently required when modifying the
movability aspects of a page; hopefully we can soon decouple this from the
page lock.
Link: https://lkml.kernel.org/r/20250704102524.326966-3-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Brendan Jackman <jackmanb@google.com>
Cc: Byungchul Park <byungchul@sk.com>
Cc: Chengming Zhou <chengming.zhou@linux.dev>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Eugenio Pé rez <eperezma@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Gregory Price <gourry@gourry.net>
Cc: Harry Yoo <harry.yoo@oracle.com>
Cc: "Huang, Ying" <ying.huang@linux.alibaba.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Jerrin Shaji George <jerrin.shaji-george@broadcom.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Joshua Hahn <joshua.hahnjy@gmail.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Mathew Brost <matthew.brost@intel.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Naoya Horiguchi <nao.horiguchi@gmail.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Peter Xu <peterx@redhat.com>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Rakie Kim <rakie.kim@sk.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Cc: xu xin <xu.xin16@zte.com.cn>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stable-dep-of: 0da2ba35c0d5 ("powerpc/pseries/cmm: adjust BALLOON_MIGRATE when migrating pages")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
CONFIG_BALLOON_COMPACTION
[ Upstream commit fc6bcf9ac4de76f5e7bcd020b3c0a86faff3f2d5 ]
Patch series "powerpc/pseries/cmm: two smaller fixes".
Two smaller fixes identified while doing a bigger rework.
This patch (of 2):
We always have to initialize the balloon_dev_info, even when compaction is
not configured in: otherwise the containing list and the lock are left
uninitialized.
Likely not many such configs exist in practice, but let's CC stable to
be sure.
This was found by code inspection.
Link: https://lkml.kernel.org/r/20251021100606.148294-1-david@redhat.com
Link: https://lkml.kernel.org/r/20251021100606.148294-2-david@redhat.com
Fixes: fe030c9b85e6 ("powerpc/pseries/cmm: Implement balloon compaction")
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
[ moved balloon_devinfo_init() call from inside cmm_balloon_compaction_init() to cmm_init() ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 00312419f0863964625d6dcda8183f96849412c6 ]
On systems using the hash MMU, there is a software SLB preload cache that
mirrors the entries loaded into the hardware SLB buffer. This preload
cache is subject to periodic eviction — typically after every 256 context
switches — to remove old entry.
To optimize performance, the kernel skips switch_mmu_context() in
switch_mm_irqs_off() when the prev and next mm_struct are the same.
However, on hash MMU systems, this can lead to inconsistencies between
the hardware SLB and the software preload cache.
If an SLB entry for a process is evicted from the software cache on one
CPU, and the same process later runs on another CPU without executing
switch_mmu_context(), the hardware SLB may retain stale entries. If the
kernel then attempts to reload that entry, it can trigger an SLB
multi-hit error.
The following timeline shows how stale SLB entries are created and can
cause a multi-hit error when a process moves between CPUs without a
MMU context switch.
CPU 0 CPU 1
----- -----
Process P
exec swapper/1
load_elf_binary
begin_new_exc
activate_mm
switch_mm_irqs_off
switch_mmu_context
switch_slb
/*
* This invalidates all
* the entries in the HW
* and setup the new HW
* SLB entries as per the
* preload cache.
*/
context_switch
sched_migrate_task migrates process P to cpu-1
Process swapper/0 context switch (to process P)
(uses mm_struct of Process P) switch_mm_irqs_off()
switch_slb
load_slb++
/*
* load_slb becomes 0 here
* and we evict an entry from
* the preload cache with
* preload_age(). We still
* keep HW SLB and preload
* cache in sync, that is
* because all HW SLB entries
* anyways gets evicted in
* switch_slb during SLBIA.
* We then only add those
* entries back in HW SLB,
* which are currently
* present in preload_cache
* (after eviction).
*/
load_elf_binary continues...
setup_new_exec()
slb_setup_new_exec()
sched_switch event
sched_migrate_task migrates
process P to cpu-0
context_switch from swapper/0 to Process P
switch_mm_irqs_off()
/*
* Since both prev and next mm struct are same we don't call
* switch_mmu_context(). This will cause the HW SLB and SW preload
* cache to go out of sync in preload_new_slb_context. Because there
* was an SLB entry which was evicted from both HW and preload cache
* on cpu-1. Now later in preload_new_slb_context(), when we will try
* to add the same preload entry again, we will add this to the SW
* preload cache and then will add it to the HW SLB. Since on cpu-0
* this entry was never invalidated, hence adding this entry to the HW
* SLB will cause a SLB multi-hit error.
*/
load_elf_binary continues...
START_THREAD
start_thread
preload_new_slb_context
/*
* This tries to add a new EA to preload cache which was earlier
* evicted from both cpu-1 HW SLB and preload cache. This caused the
* HW SLB of cpu-0 to go out of sync with the SW preload cache. The
* reason for this was, that when we context switched back on CPU-0,
* we should have ideally called switch_mmu_context() which will
* bring the HW SLB entries on CPU-0 in sync with SW preload cache
* entries by setting up the mmu context properly. But we didn't do
* that since the prev mm_struct running on cpu-0 was same as the
* next mm_struct (which is true for swapper / kernel threads). So
* now when we try to add this new entry into the HW SLB of cpu-0,
* we hit a SLB multi-hit error.
*/
WARNING: CPU: 0 PID: 1810970 at arch/powerpc/mm/book3s64/slb.c:62
assert_slb_presence+0x2c/0x50(48 results) 02:47:29 [20157/42149]
Modules linked in:
CPU: 0 UID: 0 PID: 1810970 Comm: dd Not tainted 6.16.0-rc3-dirty #12
VOLUNTARY
Hardware name: IBM pSeries (emulated by qemu) POWER8 (architected)
0x4d0200 0xf000004 of:SLOF,HEAD hv:linux,kvm pSeries
NIP: c00000000015426c LR: c0000000001543b4 CTR: 0000000000000000
REGS: c0000000497c77e0 TRAP: 0700 Not tainted (6.16.0-rc3-dirty)
MSR: 8000000002823033 <SF,VEC,VSX,FP,ME,IR,DR,RI,LE> CR: 28888482 XER: 00000000
CFAR: c0000000001543b0 IRQMASK: 3
<...>
NIP [c00000000015426c] assert_slb_presence+0x2c/0x50
LR [c0000000001543b4] slb_insert_entry+0x124/0x390
Call Trace:
0x7fffceb5ffff (unreliable)
preload_new_slb_context+0x100/0x1a0
start_thread+0x26c/0x420
load_elf_binary+0x1b04/0x1c40
bprm_execve+0x358/0x680
do_execveat_common+0x1f8/0x240
sys_execve+0x58/0x70
system_call_exception+0x114/0x300
system_call_common+0x160/0x2c4
>>From the above analysis, during early exec the hardware SLB is cleared,
and entries from the software preload cache are reloaded into hardware
by switch_slb. However, preload_new_slb_context and slb_setup_new_exec
also attempt to load some of the same entries, which can trigger a
multi-hit. In most cases, these additional preloads simply hit existing
entries and add nothing new. Removing these functions avoids redundant
preloads and eliminates the multi-hit issue. This patch removes these
two functions.
We tested process switching performance using the context_switch
benchmark on POWER9/hash, and observed no regression.
Without this patch: 129041 ops/sec
With this patch: 129341 ops/sec
We also measured SLB faults during boot, and the counts are essentially
the same with and without this patch.
SLB faults without this patch: 19727
SLB faults with this patch: 19786
Fixes: 5434ae74629a ("powerpc/64s/hash: Add a SLB preload cache")
cc: stable@vger.kernel.org
Suggested-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Donet Tom <donettom@linux.ibm.com>
Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/0ac694ae683494fe8cadbd911a1a5018d5d3c541.1761834163.git.ritesh.list@gmail.com
[ Adjust context ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 5fb1d3ce3e74a4530042795e1e065422295f1371 upstream.
When the kernel leaves to userspace via syscall_restore_rfi(), the
W bit is not set in the new PSW. This doesn't cause any problems
because there's no 64 bit userspace for parisc. Simple static binaries
are usually loaded at addresses way below the 32 bit limit so the W bit
doesn't matter.
Fix this by setting the W bit when TIF_32BIT is not set.
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Cc: stable@vger.kernel.org
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 1aa4524c0c1b54842c4c0a370171d11b12d0709b upstream.
In wide mode, the IASQ contain the upper part of the GVA
during interruption. This needs to be reversed before
the space is used - otherwise it contains parts of IAOQ.
See Page 2-13 "Processing Resources / Interruption Instruction
Address Queues" in the Parisc 2.0 Architecture Manual page 2-13
for an explanation.
The IAOQ/IASQ space_adjust was skipped for other interruptions
than itlb misses. However, the code in handle_interruption()
checks whether iasq[0] contains a valid space. Due to the not
masked out bits this match failed and the process was killed.
Also add space_adjust for IAOQ1/IASQ1 so ptregs contains sane values.
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Cc: stable@vger.kernel.org # v6.0+
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit f402ecd7a8b6446547076f4bd24bd5d4dcc94481 upstream.
Set exit_code_hi to -1u as a temporary band-aid to fix a long-standing
(effectively since KVM's inception) bug where KVM treats the exit code as
a 32-bit value, when in reality it's a 64-bit value. Per the APM, offset
0x70 is a single 64-bit value:
070h 63:0 EXITCODE
And a sane reading of the error values defined in "Table C-1. SVM Intercept
Codes" is that negative values use the full 64 bits:
–1 VMEXIT_INVALID Invalid guest state in VMCB.
–2 VMEXIT_BUSYBUSY bit was set in the VMSA
–3 VMEXIT_IDLE_REQUIREDThe sibling thread is not in an idle state
-4 VMEXIT_INVALID_PMC Invalid PMC state
And that interpretation is confirmed by testing on Milan and Turin (by
setting bits in CR0[63:32] to generate VMEXIT_INVALID on VMRUN).
Furthermore, Xen has treated exitcode as a 64-bit value since HVM support
was adding in 2006 (see Xen commit d1bd157fbc ("Big merge the HVM
full-virtualisation abstractions.")).
Cc: Jim Mattson <jmattson@google.com>
Cc: Yosry Ahmed <yosry.ahmed@linux.dev>
Cc: stable@vger.kernel.org
Reviewed-by: Yosry Ahmed <yosry.ahmed@linux.dev>
Link: https://patch.msgid.link/20251113225621.1688428-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 5674a76db0213f9db1e4d08e847ff649b46889c0 upstream.
When emulating L2 instructions, svm_check_intercept() checks whether a
write to CR0 should trigger a synthesized #VMEXIT with
SVM_EXIT_CR0_SEL_WRITE. For MOV-to-CR0, SVM_EXIT_CR0_SEL_WRITE is only
triggered if any bit other than CR0.MP and CR0.TS is updated. However,
according to the APM (24593—Rev. 3.42—March 2024, Table 15-7):
The LMSW instruction treats the selective CR0-write
intercept as a non-selective intercept (i.e., it intercepts
regardless of the value being written).
Skip checking the changed bits for x86_intercept_lmsw and always inject
SVM_EXIT_CR0_SEL_WRITE.
Fixes: cfec82cb7d31 ("KVM: SVM: Add intercept check for emulated cr accesses")
Cc: stable@vger.kernel.org
Reported-by: Matteo Rizzo <matteorizzo@google.com>
Signed-off-by: Yosry Ahmed <yosry.ahmed@linux.dev>
Link: https://patch.msgid.link/20251024192918.3191141-3-yosry.ahmed@linux.dev
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 18ab3fc8e880791aa9f7c000261320fc812b5465 upstream.
When advancing the target expiration for the guest's APIC timer in periodic
mode, set the expiration to "now" if the target expiration is in the past
(similar to what is done in update_target_expiration()). Blindly adding
the period to the previous target expiration can result in KVM generating
a practically unbounded number of hrtimer IRQs due to programming an
expired timer over and over. In extreme scenarios, e.g. if userspace
pauses/suspends a VM for an extended duration, this can even cause hard
lockups in the host.
Currently, the bug only affects Intel CPUs when using the hypervisor timer
(HV timer), a.k.a. the VMX preemption timer. Unlike the software timer,
a.k.a. hrtimer, which KVM keeps running even on exits to userspace, the
HV timer only runs while the guest is active. As a result, if the vCPU
does not run for an extended duration, there will be a huge gap between
the target expiration and the current time the vCPU resumes running.
Because the target expiration is incremented by only one period on each
timer expiration, this leads to a series of timer expirations occurring
rapidly after the vCPU/VM resumes.
More critically, when the vCPU first triggers a periodic HV timer
expiration after resuming, advancing the expiration by only one period
will result in a target expiration in the past. As a result, the delta
may be calculated as a negative value. When the delta is converted into
an absolute value (tscdeadline is an unsigned u64), the resulting value
can overflow what the HV timer is capable of programming. I.e. the large
value will exceed the VMX Preemption Timer's maximum bit width of
cpu_preemption_timer_multi + 32, and thus cause KVM to switch from the
HV timer to the software timer (hrtimers).
After switching to the software timer, periodic timer expiration callbacks
may be executed consecutively within a single clock interrupt handler,
because hrtimers honors KVM's request for an expiration in the past and
immediately re-invokes KVM's callback after reprogramming. And because
the interrupt handler runs with IRQs disabled, restarting KVM's hrtimer
over and over until the target expiration is advanced to "now" can result
in a hard lockup.
E.g. the following hard lockup was triggered in the host when running a
Windows VM (only relevant because it used the APIC timer in periodic mode)
after resuming the VM from a long suspend (in the host).
NMI watchdog: Watchdog detected hard LOCKUP on cpu 45
...
RIP: 0010:advance_periodic_target_expiration+0x4d/0x80 [kvm]
...
RSP: 0018:ff4f88f5d98d8ef0 EFLAGS: 00000046
RAX: fff0103f91be678e RBX: fff0103f91be678e RCX: 00843a7d9e127bcc
RDX: 0000000000000002 RSI: 0052ca4003697505 RDI: ff440d5bfbdbd500
RBP: ff440d5956f99200 R08: ff2ff2a42deb6a84 R09: 000000000002a6c0
R10: 0122d794016332b3 R11: 0000000000000000 R12: ff440db1af39cfc0
R13: ff440db1af39cfc0 R14: ffffffffc0d4a560 R15: ff440db1af39d0f8
FS: 00007f04a6ffd700(0000) GS:ff440db1af380000(0000) knlGS:000000e38a3b8000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000000d5651feff8 CR3: 000000684e038002 CR4: 0000000000773ee0
PKRU: 55555554
Call Trace:
<IRQ>
apic_timer_fn+0x31/0x50 [kvm]
__hrtimer_run_queues+0x100/0x280
hrtimer_interrupt+0x100/0x210
? ttwu_do_wakeup+0x19/0x160
smp_apic_timer_interrupt+0x6a/0x130
apic_timer_interrupt+0xf/0x20
</IRQ>
Moreover, if the suspend duration of the virtual machine is not long enough
to trigger a hard lockup in this scenario, since commit 98c25ead5eda
("KVM: VMX: Move preemption timer <=> hrtimer dance to common x86"), KVM
will continue using the software timer until the guest reprograms the APIC
timer in some way. Since the periodic timer does not require frequent APIC
timer register programming, the guest may continue to use the software
timer in perpetuity.
Fixes: d8f2f498d9ed ("x86/kvm: fix LAPIC timer drift when guest uses periodic mode")
Cc: stable@vger.kernel.org
Signed-off-by: fuqiang wang <fuqiang.wng@gmail.com>
[sean: massage comments and changelog]
Link: https://patch.msgid.link/20251113205114.1647493-4-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 9633f180ce994ab293ce4924a9b7aaf4673aa114 upstream.
When restarting an hrtimer to emulate a the guest's APIC timer in periodic
mode, explicitly set the expiration using the target expiration computed
by advance_periodic_target_expiration() instead of adding the period to
the existing timer. This will allow making adjustments to the expiration,
e.g. to deal with expirations far in the past, without having to implement
the same logic in both advance_periodic_target_expiration() and
apic_timer_fn().
Cc: stable@vger.kernel.org
Signed-off-by: fuqiang wang <fuqiang.wng@gmail.com>
[sean: split to separate patch, write changelog]
Link: https://patch.msgid.link/20251113205114.1647493-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 0ea9494be9c931ddbc084ad5e11fda91b554cf47 upstream.
WARN and don't restart the hrtimer if KVM's callback runs with the guest's
APIC timer in periodic mode but with a period of '0', as not advancing the
hrtimer's deadline would put the CPU into an infinite loop of hrtimer
events. Observing a period of '0' should be impossible, even when the
hrtimer is running on a different CPU than the vCPU, as KVM is supposed to
cancel the hrtimer before changing (or zeroing) the period, e.g. when
switching from periodic to one-shot.
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20251113205114.1647493-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 2f22115709fc7ebcfa40af3367a508fbbd2f71e9 upstream.
In the C code, the 'inc' argument to the assembly functions
blake2s_compress_ssse3() and blake2s_compress_avx512() is declared with
type u32, matching blake2s_compress(). The assembly code then reads it
from the 64-bit %rcx. However, the ABI doesn't guarantee zero-extension
to 64 bits, nor do gcc or clang guarantee it. Therefore, fix these
functions to read this argument from the 32-bit %ecx.
In theory, this bug could have caused the wrong 'inc' value to be used,
causing incorrect BLAKE2s hashes. In practice, probably not: I've fixed
essentially this same bug in many other assembly files too, but there's
never been a real report of it having caused a problem. In x86_64, all
writes to 32-bit registers are zero-extended to 64 bits. That results
in zero-extension in nearly all situations. I've only been able to
demonstrate a lack of zero-extension with a somewhat contrived example
involving truncation, e.g. when the C code has a u64 variable holding
0x1234567800000040 and passes it as a u32 expecting it to be truncated
to 0x40 (64). But that's not what the real code does, of course.
Fixes: ed0356eda153 ("crypto: blake2s - x86_64 SIMD implementation")
Cc: stable@vger.kernel.org
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20251102234209.62133-2-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 825ce89a3ef17f84cf2c0eacfa6b8dc9fd11d13f ]
The PUT_64[LB]E() macros need to cast the value to unsigned long long
like the GET_64[LB]E() macros. Caused lots of warnings when compiled
on 32-bit, and clobbered addresses (36-bit P4080).
Signed-off-by: Ben Collins <bcollins@kernel.org>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/2025042122-mustard-wrasse-694572@boujee-and-buff
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 680ad315caaa2860df411cb378bf3614d96c7648 ]
If gio_device_register fails, gio_dev_put() is required to
drop the gio_dev device reference.
Fixes: e84de0c61905 ("MIPS: GIO bus support for SGI IP22/28")
Signed-off-by: Haoxiang Li <haoxiang_li2024@163.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 1fe4002cf7f23d70c79bda429ca2a9423ebcfdfa ]
A KASAN build bloats these single load/store helpers such that
it fails to inline them:
vmlinux.o: error: objtool: irqentry_exit+0x5e8: call to instruction_pointer_set() with UACCESS enabled
Make sure the compiler isn't allowed to do stupid.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://patch.msgid.link/20251031105435.GU4068168@noisy.programming.kicks-ass.net
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 189e5deb944a6f9c7992355d60bffd8ec2e54a9c ]
Analogically to the x86 commit 881a9c9cb785 ("bpf: Do not audit
capability check in do_jit()"), change the capable() call to
ns_capable_noaudit() in order to avoid spurious SELinux denials in audit
log.
The commit log from that commit applies here as well:
"""
The failure of this check only results in a security mitigation being
applied, slightly affecting performance of the compiled BPF program. It
doesn't result in a failed syscall, an thus auditing a failed LSM
permission check for it is unwanted. For example with SELinux, it causes
a denial to be reported for confined processes running as root, which
tends to be flagged as a problem to be fixed in the policy. Yet
dontauditing or allowing CAP_SYS_ADMIN to the domain may not be
desirable, as it would allow/silence also other checks - either going
against the principle of least privilege or making debugging potentially
harder.
Fix it by changing it from capable() to ns_capable_noaudit(), which
instructs the LSMs to not audit the resulting denials.
"""
Fixes: f300769ead03 ("arm64: bpf: Only mitigate cBPF programs loaded by unprivileged users")
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Link: https://lore.kernel.org/r/20251204125916.441021-1-omosnace@redhat.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit edb924a7211c9aa7a4a415e03caee4d875e46b8e ]
In the inline assembly inside load_unaligned_zeropad(), the "addr" is
constrained as input-only operand. The compiler assumes that on exit
from the asm statement these operands contain the same values as they
had before executing the statement, but when kernel page fault happened, the assembly fixup code "bic %2 %2, #0x3" modify the value of "addr", which may lead to an unexpected behavior.
Use a temporary variable "tmp" to handle it, instead of modifying the
input-only operand, just like what arm64's load_unaligned_zeropad()
does.
Fixes: b9a50f74905a ("ARM: 7450/1: dcache: select DCACHE_WORD_ACCESS for little-endian ARMv6+ CPUs")
Co-developed-by: Xie Yuanbin <xieyuanbin1@huawei.com>
Signed-off-by: Xie Yuanbin <xieyuanbin1@huawei.com>
Signed-off-by: Liyuan Pang <pangliyuan1@huawei.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit eae40a6da63faa9fb63ff61f8fa2b3b57da78a84 ]
HPTE format was changed since Power9 (ISA 3.0) onwards. While dumping
kernel hash page tables, nothing gets printed on powernv P9+. This patch
utilizes the helpers added in the patch tagged as fixes, to convert new
format to old format and dump the hptes. This fix is only needed for
native_find() (powernv), since pseries continues to work fine with the
old format.
Fixes: 6b243fcfb5f1e ("powerpc/64: Simplify adaptation to new ISA v3.00 HPTE format")
Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/4c2bb9e5b3cfbc0dd80b61b67cdd3ccfc632684c.1761834163.git.ritesh.list@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 5e4e355ae7cdeb0fef5dbe908866e1f895abfacc ]
current large PEBS flag check only checks if sample_regs_user contains
unsupported GPRs but doesn't check if sample_regs_intr contains
unsupported GPRs.
Of course, currently PEBS HW supports to sample all perf supported GPRs,
the missed check doesn't cause real issue. But it won't be true any more
after the subsequent patches support to sample SSP register. SSP
sampling is not supported by adaptive PEBS HW and it would be supported
until arch-PEBS HW. So correct this issue.
Fixes: a47ba4d77e12 ("perf/x86: Enable free running PEBS for REGS_USER/INTR")
Signed-off-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20251029102136.61364-5-dapeng1.mi@linux.intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ced37e9ceae50e4cb6cd058963bd315ec9afa651 ]
When triggering a stack dump via sysrq (echo t > /proc/sysrq-trigger),
KASAN may report false-positive out-of-bounds access:
BUG: KASAN: out-of-bounds in __show_regs+0x4b/0x340
Call Trace:
dump_stack_lvl
print_address_description.constprop.0
print_report
__show_regs
show_trace_log_lvl
sched_show_task
show_state_filter
sysrq_handle_showstate
__handle_sysrq
write_sysrq_trigger
proc_reg_write
vfs_write
ksys_write
do_syscall_64
entry_SYSCALL_64_after_hwframe
The issue occurs as follows:
Task A (walk other tasks' stacks) Task B (running)
1. echo t > /proc/sysrq-trigger
show_trace_log_lvl
regs = unwind_get_entry_regs()
show_regs_if_on_stack(regs)
2. The stack value pointed by
`regs` keeps changing, and
so are the tags in its
KASAN shadow region.
__show_regs(regs)
regs->ax, regs->bx, ...
3. hit KASAN redzones, OOB
When task A walks task B's stack without suspending it, the continuous changes
in task B's stack (and corresponding KASAN shadow tags) may cause task A to
hit KASAN redzones when accessing obsolete values on the stack, resulting in
false positive reports.
Simply stopping the task before unwinding is not a viable fix, as it would
alter the state intended to inspect. This is especially true for diagnosing
misbehaving tasks (e.g., in a hard lockup), where stopping might fail or hide
the root cause by changing the call stack.
Therefore, fix this by disabling KASAN checks during asynchronous stack
unwinding, which is identified when the unwinding task does not match the
current task (task != current).
[ bp: Align arguments on function's opening brace. ]
Fixes: 3b3fa11bc700 ("x86/dumpstack: Print any pt_regs found on the stack")
Signed-off-by: Tengda Wu <wutengda@huaweicloud.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://patch.msgid.link/all/20251023090632.269121-1-wutengda@huaweicloud.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 37ad4ee8364255c73026a3c343403b5977fa7e79 ]
Upon function exit, KMSAN marks local variables as uninitialized. Further
function calls may result in the compiler creating the stack frame where
these local variables resided. This results in frame pointers being
marked as uninitialized data, which is normally correct, because they are
not stack-allocated.
However stack unwinding functions are supposed to read and dereference the
frame pointers, in which case KMSAN might be reporting uses of
uninitialized values.
To work around that, we mark update_stack_state(), unwind_next_frame() and
show_trace_log_lvl() with __no_kmsan_checks, preventing all KMSAN reports
inside those functions and making them return initialized values.
Link: https://lkml.kernel.org/r/20220915150417.722975-40-glider@google.com
Signed-off-by: Alexander Potapenko <glider@google.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Eric Biggers <ebiggers@google.com>
Cc: Eric Biggers <ebiggers@kernel.org>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Ilya Leoshkevich <iii@linux.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Marco Elver <elver@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vegard Nossum <vegard.nossum@oracle.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stable-dep-of: ced37e9ceae5 ("x86/dumpstack: Prevent KASAN false positive warnings in __show_regs()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 09a217c10504bcaef911cf2af74e424338efe629 ]
show_trace_log_lvl() is not used by other compilation units so make it
static and remove the declaration from the header file.
Signed-off-by: Hui Su <sh_def@163.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20201113133943.GA136221@rlk
Stable-dep-of: ced37e9ceae5 ("x86/dumpstack: Prevent KASAN false positive warnings in __show_regs()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 07a75d08cfa1b883a6e1256666e5f0617ee99231 ]
In case SCLP CPU detection does not work a fallback mechanism using SIGP is
in place. Since a cleanup this does not work correctly anymore: new CPUs
are only considered if their type matches the boot CPU.
Before the cleanup the information if a CPU type should be considered was
also part of a structure generated by the fallback mechanism and indicated
that a CPU type should not be considered when adding CPUs.
Since the rework a global SCLP state is used instead. If the global SCLP
state indicates that the CPU type should be considered and the fallback
mechanism is used, there may be a mismatch with CPU types if CPUs are
added. This can lead to a system with only a single CPU even tough there
are many more CPUs.
Address this by simply copying the boot cpu type into the generated data
structure from the fallback mechanism.
Reported-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Fixes: d08d94306e90 ("s390/smp: cleanup core vs. cpu in the SCLP interface")
Reviewed-by: Mete Durlu <meted@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 9f048fa487409e364cf866c957cf0b0d782ca5a3 upstream.
Depending on the particular CPU implementation a TLB shutdown may occur
if multiple matching entries are detected upon the execution of a TLBP
or the TLBWI/TLBWR instructions. Given that we don't know what entries
we have been handed we need to be very careful with the initial TLB
setup and avoid all these instructions.
Therefore read all the TLB entries one by one with the TLBR instruction,
bypassing the content addressing logic, and truncate any large pages in
place so as to avoid a case in the second step where an incoming entry
for a large page at a lower address overlaps with a replacement entry
chosen at another index. Then preinitialize the TLB using addresses
outside our usual unique range and avoiding clashes with any entries
received, before making the usual call to local_flush_tlb_all().
This fixes (at least) R4x00 cores if TLBP hits multiple matching TLB
entries (SGI IP22 PROM for examples sets up all TLBs to the same virtual
address).
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Fixes: 35ad7e181541 ("MIPS: mm: tlb-r4k: Uniquify TLB entries on init")
Cc: stable@vger.kernel.org
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com> # Boston I6400, M5150 sim
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 6d08340d1e354787d6c65a8c3cdd4d41ffb8a5ed upstream.
This reverts commit 83f44ae0f8afcc9da659799db8693f74847e66b3.
Currently we store initial stacktrace entry twice for non-HW ot_regs, which
means callers that fail perf_hw_regs(regs) condition in perf_callchain_kernel.
It's easy to reproduce this bpftrace:
# bpftrace -e 'tracepoint:sched:sched_process_exec { print(kstack()); }'
Attaching 1 probe...
bprm_execve+1767
bprm_execve+1767
do_execveat_common.isra.0+425
__x64_sys_execve+56
do_syscall_64+133
entry_SYSCALL_64_after_hwframe+118
When perf_callchain_kernel calls unwind_start with first_frame, AFAICS
we do not skip regs->ip, but it's added as part of the unwind process.
Hence reverting the extra perf_callchain_store for non-hw regs leg.
I was not able to bisect this, so I'm not really sure why this was needed
in v5.2 and why it's not working anymore, but I could see double entries
as far as v5.10.
I did the test for both ORC and framepointer unwind with and without the
this fix and except for the initial entry the stacktraces are the same.
Acked-by: Song Liu <song@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20251104215405.168643-2-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 88b61e3bff93f99712718db785b4aa0c1165f35c upstream.
cc-ifversion is GCC specific. Replace it with compiler specific
variants. Update the users of cc-ifversion to use these new macros.
Link: https://github.com/ClangBuiltLinux/linux/issues/350
Link: https://lore.kernel.org/llvm/CAGG=3QWSAUakO42kubrCap8fp-gm1ERJJAYXTnP1iHk_wrH=BQ@mail.gmail.com/
Suggested-by: Bill Wendling <morbo@google.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
[nathan: Backport to 5.10 and eliminate instances of cc-ifversion that
did not exist upstream when this change was original created]
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ebd729fef31620e0bf74cbf8a4c7fda73a2a4e7e upstream.
Fix a regression that has caused accesses to the PCI MMIO window to
complete unclaimed in non-EVA configurations with the SOC-it family of
system controllers, preventing PCI devices from working that use MMIO.
In the non-EVA case PHYS_OFFSET is set to 0, meaning that PCI_BAR0 is
set with an empty mask (and PCI_HEAD4 matches addresses starting from 0
accordingly). Consequently all addresses are matched for incoming DMA
accesses from PCI. This seems to confuse the system controller's logic
and outgoing bus cycles targeting the PCI MMIO window seem not to make
it to the intended devices.
This happens as well when a wider mask is used with PCI_BAR0, such as
0x80000000 or 0xe0000000, that makes addresses match that overlap with
the PCI MMIO window, which starts at 0x10000000 in our configuration.
Set the mask in PCI_BAR0 to 0xf0000000 for non-EVA then, covering the
non-EVA maximum 256 MiB of RAM, which is what YAMON does and which used
to work correctly up to the offending commit. Set PCI_P2SCMSKL to match
PCI_BAR0 as required by the system controller's specification, and match
PCI_P2SCMAPL to PCI_HEAD4 for identity mapping.
Verified with:
Core board type/revision = 0x0d (Core74K) / 0x01
System controller/revision = MIPS SOC-it 101 OCP / 1.3 SDR-FW-4:1
Processor Company ID/options = 0x01 (MIPS Technologies, Inc.) / 0x1c
Processor ID/revision = 0x97 (MIPS 74Kf) / 0x4c
for non-EVA and with:
Core board type/revision = 0x0c (CoreFPGA-5) / 0x00
System controller/revision = MIPS ROC-it2 / 0.0 FW-1:1 (CLK_unknown) GIC
Processor Company ID/options = 0x01 (MIPS Technologies, Inc.) / 0x00
Processor ID/revision = 0xa0 (MIPS interAptiv UP) / 0x20
for EVA/non-EVA, fixing:
defxx 0000:00:12.0: assign IRQ: got 10
defxx: v1.12 2021/03/10 Lawrence V. Stefani and others
0000:00:12.0: Could not read adapter factory MAC address!
vs:
defxx 0000:00:12.0: assign IRQ: got 10
defxx: v1.12 2021/03/10 Lawrence V. Stefani and others
0000:00:12.0: DEFPA at MMIO addr = 0x10142000, IRQ = 10, Hardware addr = 00-00-f8-xx-xx-xx
0000:00:12.0: registered as fddi0
for non-EVA and causing no change for EVA.
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Fixes: 422dd256642b ("MIPS: Malta: Allow PCI devices DMA to lower 2GB physical")
Cc: stable@vger.kernel.org # v4.9+
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 44e8241c51f762aafa50ed116da68fd6ecdcc954 upstream.
On big endian arm kernels, the arm optimized Curve25519 code produces
incorrect outputs and fails the Curve25519 test. This has been true
ever since this code was added.
It seems that hardly anyone (or even no one?) actually uses big endian
arm kernels. But as long as they're ostensibly supported, we should
disable this code on them so that it's not accidentally used.
Note: for future-proofing, use !CPU_BIG_ENDIAN instead of
CPU_LITTLE_ENDIAN. Both of these are arch-specific options that could
get removed in the future if big endian support gets dropped.
Fixes: d8f1308a025f ("crypto: arm/curve25519 - wire up NEON implementation")
Cc: stable@vger.kernel.org
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20251104054906.716914-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
errors
[ Upstream commit ae9e9f3d67dcef7582a4524047b01e33c5185ddb ]
openSBI v1.7 adds harts checks for ipi operations. Especially it
adds comparison between hmask passed as an argument from linux
and mask of online harts (from openSBI side). If they don't
fit each other the error occurs.
When cpu is offline, cpu_online_mask is explicitly cleared in
__cpu_disable. However, there is no explicit clearing of
mm_cpumask. mm_cpumask is used for rfence operations that
call openSBI RFENCE extension which uses ipi to remote harts.
If hart is offline there may be error if mask of linux is not
as mask of online harts in openSBI.
this patch adds explicit clearing of mm_cpumask for offline hart.
Signed-off-by: Danil Skrebenkov <danil.skrebenkov@cloudbear.ru>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20250919132849.31676-1-danil.skrebenkov@cloudbear.ru
[pjw@kernel.org: rewrote subject line for clarity]
Signed-off-by: Paul Walmsley <pjw@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a74f038fa50e0d33b740f44f862fe856f16de6a8 ]
The pt_dump_seq_puts() macro incorrectly uses seq_printf() instead of
seq_puts(). This is both a performance issue and conceptually wrong,
as the macro name suggests plain string output (puts) but the
implementation uses formatted output (printf).
The macro is used in ptdump.c:301 to output a newline character. Using
seq_printf() adds unnecessary overhead for format string parsing when
outputting this constant string.
This bug was introduced in commit 59c4da8640cc ("riscv: Add support to
dump the kernel page tables") in 2020, which copied the implementation
pattern from other architectures that had the same bug.
Fixes: 59c4da8640cc ("riscv: Add support to dump the kernel page tables")
Signed-off-by: Josephine Pfeiffer <hi@josie.lol>
Link: https://lore.kernel.org/r/20251018170451.3355496-1-hi@josie.lol
Signed-off-by: Paul Walmsley <pjw@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0c01fe49651d387776abed6a28541e80c8a93319 ]
Add a new word in assembly to store ACR value during the calls
to at91_plla_disable/at91_plla_enable macros and use it.
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
[cristian.birsan@microchip.com: remove ACR_DEFAULT_PLLA loading]
Signed-off-by: Cristian Birsan <cristian.birsan@microchip.com>
Link: https://lore.kernel.org/r/20250827145427.46819-4-nicolas.ferre@microchip.com
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 725e9d81868fcedaeef775948e699955b01631ae ]
Add the missing option name in the help message. Additionally,
switch to __uml_help(), because this is a global option rather
than a per-channel option.
Signed-off-by: Tiwei Bie <tiwei.btw@antgroup.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 05457d96175d25c976ab6241c332ae2eb5e07833 ]
This is needed so that the kernel can handle R_SPARC_UA64 relocations,
which is emitted by LLVM's IAS.
Signed-off-by: Koakuma <koachan@protonmail.com>
Reviewed-by: Andreas Larsson <andreas@gaisler.com>
Signed-off-by: Andreas Larsson <andreas@gaisler.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 960550503965094b0babd7e8c83ec66c8a763b0b ]
The commit b2798ba0b876 ("KVM: X86: Choose qspinlock when dedicated
physical CPUs are available") states that when PV_DEDICATED=1
(vCPU has dedicated pCPU), qspinlock should be preferred regardless of
PV_UNHALT. However, the current implementation doesn't reflect this: when
PV_UNHALT=0, we still use virt_spin_lock() even with dedicated pCPUs.
This is suboptimal because:
1. Native qspinlocks should outperform virt_spin_lock() for dedicated
vCPUs irrespective of HALT exiting
2. virt_spin_lock() should only be preferred when vCPUs may be preempted
(non-dedicated case)
So reorder the PV spinlock checks to:
1. First handle dedicated pCPU case (disable virt_spin_lock_key)
2. Second check single CPU, and nopvspin configuration
3. Only then check PV_UNHALT support
This ensures we always use native qspinlock for dedicated vCPUs, delivering
pretty performance gains at high contention levels.
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Tested-by: Wangyang Guo <wangyang.guo@intel.com>
Link: https://lore.kernel.org/r/20250722110005.4988-1-lirongqing@baidu.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b0d04fe6a633ada2c7bc1b5ddd011cbd85961868 ]
Bindig requires a node name matching ‘^gpio@[0-9a-f]+$’. This patch
changes the clock name from “stp” to “gpio”.
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d66949a1875352d2ddd52b144333288952a9e36f ]
This fixes the following warning:
arch/mips/boot/dts/lantiq/danube_easy50712.dtb: pci@e105400 (lantiq,pci-xway): 'device_type' is a required property
from schema $id: http://devicetree.org/schemas/pci/pci-bus-common.yaml#
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e8dee66c37085dc9858eb8608bc783c2900e50e7 ]
This fixes the following warnings:
arch/mips/boot/dts/lantiq/danube_easy50712.dtb: cpus: '#address-cells' is a required property
from schema $id: http://devicetree.org/schemas/cpus.yaml#
arch/mips/boot/dts/lantiq/danube_easy50712.dtb: cpus: '#size-cells' is a required property
from schema $id: http://devicetree.org/schemas/cpus.yaml#
arch/mips/boot/dts/lantiq/danube_easy50712.dtb: cpu@0 (mips,mips24Kc): 'reg' is a required property
from schema $id: http://devicetree.org/schemas/mips/cpus.yaml#
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 704e5dd1c02371dfc7d22e1520102b197a3b628b ]
Ever since uevent support was added for AER and EEH with commit
856e1eb9bdd4 ("PCI/AER: Add uevents in AER and EEH error/resume"), it
reported PCI_ERS_RESULT_NONE as uevent when recovery begins.
Commit 7b42d97e99d3 ("PCI/ERR: Always report current recovery status for
udev") subsequently amended AER to report the actual return value of
error_detected().
Make the same change to EEH to align it with AER and s390.
Suggested-by: Lukas Wunner <lukas@wunner.de>
Link: https://lore.kernel.org/linux-pci/aIp6LiKJor9KLVpv@wunner.de/
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Lukas Wunner <lukas@wunner.de>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Acked-by: Mahesh Salgaonkar <mahesh@linux.ibm.com>
Link: https://patch.msgid.link/20250807-add_err_uevents-v5-3-adf85b0620b0@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8ba38a7a9a699905b84fa97578a8291010dec273 ]
emulate_vsyscall() expects to see X86_PF_INSTR in PFEC on a vsyscall
page fault, but the CPU does not report X86_PF_INSTR if neither
X86_FEATURE_NX nor X86_FEATURE_SMEP are enabled.
X86_FEATURE_NX should be enabled on nearly all 64-bit CPUs, except for
early P4 processors that did not support this feature.
Instead of explicitly checking for X86_PF_INSTR, compare the fault
address to RIP.
On machines with X86_FEATURE_NX enabled, issue a warning if RIP is equal
to fault address but X86_PF_INSTR is absent.
[ dhansen: flesh out code comments ]
Originally-by: Dave Hansen <dave.hansen@intel.com>
Reported-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Link: https://lore.kernel.org/all/bd81a98b-f8d4-4304-ac55-d4151a1a77ab@intel.com
Link: https://lore.kernel.org/all/20250624145918.2720487-1-kirill.shutemov%40linux.intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a3fecb9160482367365cc384c59dd220b162b066 ]
While tracking down a problem where constant expressions used by
BUILD_BUG_ON() suddenly stopped working[1], we found that an added static
initializer was convincing the compiler that it couldn't track the state
of the prior statically initialized value. Tracing this down found that
ffs() was used in the initializer macro, but since it wasn't marked with
__attribute__const__, the compiler had to assume the function might
change variable states as a side-effect (which is not true for ffs(),
which provides deterministic math results).
For arc architecture with CONFIG_ISA_ARCV2=y, the __fls() function
uses __builtin_arc_fls() which lacks GCC's const attribute, preventing
compile-time constant folding, and KUnit testing of ffs/fls fails on
arc[3]. A patch[2] to GCC to solve this has been sent.
Add a fix for this by handling compile-time constants with the standard
__builtin_clzl() builtin (which has const attribute) while preserving
the optimized arc-specific builtin for runtime cases. This has the added
benefit of skipping runtime calculation of compile-time constant values.
Even with the GCC bug fixed (which is about "attribute const") this is a
good change to avoid needless runtime costs, and should be done
regardless of the state of GCC's bug.
Build tested ARCH=arc allyesconfig with GCC arc-linux 15.2.0.
Link: https://github.com/KSPP/linux/issues/364 [1]
Link: https://gcc.gnu.org/pipermail/gcc-patches/2025-August/693273.html
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202508031025.doWxtzzc-lkp@intel.com/ [3]
Signed-off-by: Kees Cook <kees@kernel.org>
Acked-by: Vineet Gupta <vgupta@kernel.org>
Signed-off-by: Yury Norov (NVIDIA) <yury.norov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
Recent fixes have been backported to < v5.18 to fix build issues with
GCC 5.15. They all force -std=gnu11 in the CFLAGS, "because [the kernel]
requests the gnu11 standard via '-std=' in the main Makefile".
This is true for >= 5.18 versions, but not before. This switch to
-std=gnu11 has been done in commit e8c07082a810 ("Kbuild: move to
-std=gnu11").
For a question of uniformity, force -std=gnu89, similar to what is done
in the main Makefile.
Note: the fixes tags below refers to upstream commits, but this fix is
only for kernels not having commit e8c07082a810 ("Kbuild: move to
-std=gnu11").
Fixes: 7cbb015e2d3d ("parisc: fix building with gcc-15")
Fixes: 3b8b80e99376 ("s390: Add '-std=gnu11' to decompressor and purgatory CFLAGS")
Fixes: b3bee1e7c3f2 ("x86/boot: Compile boot code with -std=gnu11 too")
Fixes: ee2ab467bddf ("x86/boot: Use '-std=gnu11' to fix build with GCC 15")
Fixes: 8ba14d9f490a ("efi: libstub: Use '-std=gnu11' to fix build with GCC 15")
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b3bee1e7c3f2b1b77182302c7b2131c804175870 upstream.
Use -std=gnu11 for consistency with main kernel code.
It doesn't seem to change anything in vmlinux.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: H. Peter Anvin (Intel) <hpa@zytor.com>
Link: https://lore.kernel.org/r/2058761e-12a4-4b2f-9690-3c3c1c9902a5@p183
[ This kernel version doesn't build with GCC 15:
In file included from include/uapi/linux/posix_types.h:5,
from include/uapi/linux/types.h:14,
from include/linux/types.h:6,
from arch/x86/realmode/rm/wakeup.h:11,
from arch/x86/realmode/rm/wakemain.c:2:
include/linux/stddef.h:11:9: error: cannot use keyword 'false' as enumeration constant
11 | false = 0,
| ^~~~~
include/linux/stddef.h:11:9: note: 'false' is a keyword with '-std=c23' onwards
include/linux/types.h:30:33: error: 'bool' cannot be defined via 'typedef'
30 | typedef _Bool bool;
| ^~~~
include/linux/types.h:30:33: note: 'bool' is a keyword with '-std=c23' onwards
include/linux/types.h:30:1: warning: useless type name in empty declaration
30 | typedef _Bool bool;
| ^~~~~~~
The fix is similar to commit ee2ab467bddf ("x86/boot: Use '-std=gnu11'
to fix build with GCC 15") which has been backported to this kernel.
Note: In < 5.18 version, -std=gnu89 is used instead of -std=gnu11, see
commit e8c07082a810 ("Kbuild: move to -std=gnu11"). I suggest not to
modify that in this commit here as all the other similar fixes to
support GCC 15 set -std=gnu11. This can be done in a dedicated commit
if needed.
There was a conflict, because commit 2838307b019d ("x86/build: Remove
-m16 workaround for unsupported versions of GCC") is not in this
version and change code in the context. -std=gnu11 can still be added
at the same place. ]
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
unavailable RMID
[ Upstream commit 15292f1b4c55a3a7c940dbcb6cb8793871ed3d92 ]
Users can create as many monitoring groups as the number of RMIDs supported
by the hardware. However, on AMD systems, only a limited number of RMIDs
are guaranteed to be actively tracked by the hardware. RMIDs that exceed
this limit are placed in an "Unavailable" state.
When a bandwidth counter is read for such an RMID, the hardware sets
MSR_IA32_QM_CTR.Unavailable (bit 62). When such an RMID starts being tracked
again the hardware counter is reset to zero. MSR_IA32_QM_CTR.Unavailable
remains set on first read after tracking re-starts and is clear on all
subsequent reads as long as the RMID is tracked.
resctrl miscounts the bandwidth events after an RMID transitions from the
"Unavailable" state back to being tracked. This happens because when the
hardware starts counting again after resetting the counter to zero, resctrl
in turn compares the new count against the counter value stored from the
previous time the RMID was tracked.
This results in resctrl computing an event value that is either undercounting
(when new counter is more than stored counter) or a mistaken overflow (when
new counter is less than stored counter).
Reset the stored value (arch_mbm_state::prev_msr) of MSR_IA32_QM_CTR to
zero whenever the RMID is in the "Unavailable" state to ensure accurate
counting after the RMID resets to zero when it starts to be tracked again.
Example scenario that results in mistaken overflow
==================================================
1. The resctrl filesystem is mounted, and a task is assigned to a
monitoring group.
$mount -t resctrl resctrl /sys/fs/resctrl
$mkdir /sys/fs/resctrl/mon_groups/test1/
$echo 1234 > /sys/fs/resctrl/mon_groups/test1/tasks
$cat /sys/fs/resctrl/mon_groups/test1/mon_data/mon_L3_*/mbm_total_bytes
21323 <- Total bytes on domain 0
"Unavailable" <- Total bytes on domain 1
Task is running on domain 0. Counter on domain 1 is "Unavailable".
2. The task runs on domain 0 for a while and then moves to domain 1. The
counter starts incrementing on domain 1.
$cat /sys/fs/resctrl/mon_groups/test1/mon_data/mon_L3_*/mbm_total_bytes
7345357 <- Total bytes on domain 0
4545 <- Total bytes on domain 1
3. At some point, the RMID in domain 0 transitions to the "Unavailable"
state because the task is no longer executing in that domain.
$cat /sys/fs/resctrl/mon_groups/test1/mon_data/mon_L3_*/mbm_total_bytes
"Unavailable" <- Total bytes on domain 0
434341 <- Total bytes on domain 1
4. Since the task continues to migrate between domains, it may eventually
return to domain 0.
$cat /sys/fs/resctrl/mon_groups/test1/mon_data/mon_L3_*/mbm_total_bytes
17592178699059 <- Overflow on domain 0
3232332 <- Total bytes on domain 1
In this case, the RMID on domain 0 transitions from "Unavailable" state to
active state. The hardware sets MSR_IA32_QM_CTR.Unavailable (bit 62) when
the counter is read and begins tracking the RMID counting from 0.
Subsequent reads succeed but return a value smaller than the previously
saved MSR value (7345357). Consequently, the resctrl's overflow logic is
triggered, it compares the previous value (7345357) with the new, smaller
value and incorrectly interprets this as a counter overflow, adding a large
delta.
In reality, this is a false positive: the counter did not overflow but was
simply reset when the RMID transitioned from "Unavailable" back to active
state.
Here is the text from APM [1] available from [2].
"In PQOS Version 2.0 or higher, the MBM hardware will set the U bit on the
first QM_CTR read when it begins tracking an RMID that it was not
previously tracking. The U bit will be zero for all subsequent reads from
that RMID while it is still tracked by the hardware. Therefore, a QM_CTR
read with the U bit set when that RMID is in use by a processor can be
considered 0 when calculating the difference with a subsequent read."
[1] AMD64 Architecture Programmer's Manual Volume 2: System Programming
Publication # 24593 Revision 3.41 section 19.3.3 Monitoring L3 Memory
Bandwidth (MBM).
[ bp: Split commit message into smaller paragraph chunks for better
consumption. ]
Fixes: 4d05bf71f157d ("x86/resctrl: Introduce AMD QOS feature")
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Reinette Chatre <reinette.chatre@intel.com>
Cc: stable@vger.kernel.org # needs adjustments for <= v6.17
Link: https://bugzilla.kernel.org/show_bug.cgi?id=206537 # [2]
(cherry picked from commit 15292f1b4c55a3a7c940dbcb6cb8793871ed3d92)
[babu.moger@amd.com: Needed backport for v5.10 stable]
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit d1cc1baef67ac6c09b74629ca053bf3fb812f7dc ]
The LFENCE retpoline mitigation is not secure but the kernel prints
inconsistent messages about this fact. The dmesg log says 'Mitigation:
LFENCE', implying the system is mitigated. But sysfs reports 'Vulnerable:
LFENCE' implying the system (correctly) is not mitigated.
Fix this by printing a consistent 'Vulnerable: LFENCE' string everywhere
when this mitigation is selected.
Signed-off-by: David Kaplan <david.kaplan@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/20250915134706.3201818-1-david.kaplan@amd.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 0c33aa1804d101c11ba1992504f17a42233f0e11 upstream.
Neoverse-V3AE is also affected by erratum #3312417, as described in its
Software Developer Errata Notice (SDEN) document:
Neoverse V3AE (MP172) SDEN v9.0, erratum 3312417
https://developer.arm.com/documentation/SDEN-2615521/9-0/
Enable the workaround for Neoverse-V3AE, and document this.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
[ Ryan: Trivial backport ]
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 3bbf004c4808e2c3241e5c1ad6cc102f38a03c39 upstream.
Add cputype definitions for Neoverse-V3AE. These will be used for errata
detection in subsequent patches.
These values can be found in the Neoverse-V3AE TRM:
https://developer.arm.com/documentation/SDEN-2615521/9-0/
... in section A.6.1 ("MIDR_EL1, Main ID Register").
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
[ Ryan: Trivial backport ]
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit bf5570590a981d0659d0808d2d4bcda21b27a2a5 upstream.
MIPS Malta platform code registers the PCI southbridge legacy port I/O
PS/2 keyboard range as a standard resource marked as busy. It prevents
the i8042 driver from registering as it fails to claim the resource in
a call to i8042_platform_init(). Consequently PS/2 keyboard and mouse
devices cannot be used with this platform.
Fix the issue by removing the busy marker from the standard reservation,
making the driver register successfully:
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
and the resource show up as expected among the legacy devices:
00000000-00ffffff : MSC PCI I/O
00000000-0000001f : dma1
00000020-00000021 : pic1
00000040-0000005f : timer
00000060-0000006f : keyboard
00000060-0000006f : i8042
00000070-00000077 : rtc0
00000080-0000008f : dma page reg
000000a0-000000a1 : pic2
000000c0-000000df : dma2
[...]
If the i8042 driver has not been configured, then the standard resource
will remain there preventing any conflicting dynamic assignment of this
PCI port I/O address range.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/alpine.DEB.2.21.2510211919240.8377@angie.orcam.me.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
