summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)AuthorFilesLines
2011-03-06avr32: at32ap700x: Specify DMA Flow Controller, Src and Dst msizeViresh Kumar1-0/+9
Now that the dw_dmac DMA driver supports configurable Flow Controller, source and destination burst or msize, we need to specify which ones to use. Msize or burst size was previously hardcoded to 1, Flow controller was DMA for both M2P & P2M transfers. Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-03-02dmaengine: mxs-dma: add dma support for i.MX23/28Shawn Guo1-0/+26
This patch adds dma support for Freescale MXS-based SoC i.MX23/28, including apbh-dma and apbx-dma. * apbh-dma and apbx-dma are supported in the driver as two mxs-dma instances. * apbh-dma is different between mx23 and mx28, hardware version register is used to differentiate. * mxs-dma supports pio function besides data transfer. The driver uses dma_data_direction DMA_NONE to identify the pio mode, and steals sgl and sg_len to get pio words and numbers from clients. * mxs dmaengine has some very specific features, like sense function and the special NAND support (nand_lock, nand_wait4ready). These are too specific to implemented in generic dmaengine driver. * The driver refers to imx-sdma and only a single descriptor is statically assigned to each channel. Signed-off-by: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-02-14Merge branch 'dw_dmac' into dmaengineDan Williams1-0/+6
2011-01-31dma40: remove export of stedma40_memcpy_sgRabin Vincent1-19/+0
The dmaengine framework has the API for this now. Acked-by: Per Forlin <per.forlin@stericsson.com> Acked-by: Jonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-01-31dma40: allow realtime and priority for event linesRabin Vincent1-0/+3
DB8500v2's DMA40 (revision 3) allows setting event lines as high priority and real time. Acked-by: Per Forlin <per.forlin@stericsson.com> Acked-by: Jonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-01-30avr32: at32ap700x: specify DMA src and dst mastersJamie Iles1-0/+6
Now that the dw_dmac DMA driver supports configurable source and destination masters we need to specify which ones to use. This was previously hardcoded to 0 and 1 respectively in the driver. Acked-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com> Signed-off-by: Jamie Iles <jamie@jamieiles.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-01-22Merge branch 'fixes-2.6.38' of ↵Linus Torvalds1-4/+4
git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu * 'fixes-2.6.38' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu: x86,percpu: Move out of place 64 bit ops into X86_64 section
2011-01-22Merge branch 'irq-cleanup-for-linus' of ↵Linus Torvalds31-912/+428
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'irq-cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (37 commits) um: Use generic irq Kconfig tile: Use generic irq Kconfig sparc: Use generic irq Kconfig score: Use generic irq Kconfig powerpc: Use generic irq Kconfig parisc: Use generic irq Kconfig mn10300: Use generic irq Kconfig microblaze: Use generic irq Kconfig m68knommu: Use generic irq Kconfig ia64: Use generic irq Kconfig frv: Use generic irq Kconfig blackfin: Use generic irq Kconfig alpha: Use generic irq Kconfig genirq: Remove __do_IRQ m32r: Convert to generic irq Kconfig m32r: Convert usrv platform irq handling m32r: Convert opsput_lcdpld irq chip m32r: Convert opsput lanpld irq chip m32r: Convert opsput pld irq chip m32r: Convert opsput irq chip ...
2011-01-22Merge branch 'stable/bug-fixes-rc1' of ↵Linus Torvalds2-2/+20
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen * 'stable/bug-fixes-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xen: p2m: correctly initialize partial p2m leaf xen: fix non-ANSI function warning in irq.c
2011-01-22Merge branch 'devicetree/merge' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds2-4/+4
* 'devicetree/merge' of git://git.secretlab.ca/git/linux-2.6: powerpc/83xx: fix build failures on dt compatible list.
2011-01-22Merge branch 'merge' of ↵Linus Torvalds34-344/+332
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (34 commits) powerpc/mpic: Fix mask/unmask timeout message powerpc/pseries: Add BNX2=m to defconfig powerpc: Enable 64kB pages and 1024 threads in pseries config powerpc: Disable mcount tracers in pseries defconfig powerpc/boot/dts: Install dts from the right directory powerpc: machine_check_generic is wrong on 64bit powerpc: Check RTAS extended log flag before checking length powerpc: Fix corruption when grabbing FWNMI data powerpc: Rework pseries machine check handler powerpc: Don't silently handle machine checks from userspace powerpc: Remove duplicate debugger hook in machine_check_exception powerpc: Never halt RTAS error logging after receiving an unrecoverable machine check powerpc: Don't force MSR_RI in machine_check_exception powerpc: Print 32 bits of DSISR in show_regs powerpc/kdump: Disable ftrace during kexec powerpc/kdump: Move crash_kexec_stop_spus to kdump crash handler powerpc/kexec: Remove empty ppc_md.machine_kexec_prepare powerpc/kexec: Don't initialise kexec hooks to default handlers powerpc/kdump: Remove ppc_md.machine_crash_shutdown powerpc/kexec: Remove ppc_md.machine_kexec ...
2011-01-21xen: p2m: correctly initialize partial p2m leafStefan Bader1-1/+19
After changing the p2m mapping to a tree by commit 58e05027b530ff081ecea68e38de8d59db8f87e0 xen: convert p2m to a 3 level tree and trying to boot a DomU with 615MB of memory, the following crash was observed in the dump: kernel direct mapping tables up to 26f00000 @ 1ec4000-1fff000 BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<c0107397>] xen_set_pte+0x27/0x60 *pdpt = 0000000000000000 *pde = 0000000000000000 Adding further debug statements showed that when trying to set up pfn=0x26700 the returned mapping was invalid. pfn=0x266ff calling set_pte(0xc1fe77f8, 0x6b3003) pfn=0x26700 calling set_pte(0xc1fe7800, 0x3) Although the last_pfn obtained from the startup info is 0x26700, which should in turn not be hit, the additional 8MB which are added as extra memory normally seem to be ok. This lead to looking into the initial p2m tree construction, which uses the smaller value and assuming that there is other code handling the extra memory. When the p2m tree is set up, the leaves are directly pointed to the array which the domain builder set up. But if the mapping is not on a boundary that fits into one p2m page, this will result in the last leaf being only partially valid. And as the invalid entries are not initialized in that case, things go badly wrong. I am trying to fix that by checking whether the current leaf is a complete map and if not, allocate a completely new page and copy only the valid pointers there. This may not be the most efficient or elegant solution, but at least it seems to allow me booting DomUs with memory assignments all over the range. BugLink: http://bugs.launchpad.net/bugs/686692 [v2: Redid a bit of commit wording and fixed a compile warning] Signed-off-by: Stefan Bader <stefan.bader@canonical.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-01-21um: Use generic irq KconfigThomas Gleixner1-5/+1
No functional change. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jeff Dike <jdike@addtoit.com>
2011-01-21tile: Use generic irq KconfigThomas Gleixner1-29/+21
No functional change. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Chris Metcalf <cmetcalf@tilera.com>
2011-01-21sparc: Use generic irq KconfigThomas Gleixner1-4/+1
No functional change. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: "David S. Miller" <davem@davemloft.net>
2011-01-21score: Use generic irq KconfigThomas Gleixner1-3/+4
No functional change Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Chen Liqin <liqin.chen@sunplusct.com>
2011-01-21powerpc: Use generic irq KconfigThomas Gleixner1-21/+3
No functional change. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-01-21parisc: Use generic irq KconfigThomas Gleixner1-10/+4
No functional change. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Kyle McMartin <kyle@mcmartin.ca> Acked-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2011-01-21mn10300: Use generic irq KconfigThomas Gleixner1-4/+1
No functional change. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: David Howells <dhowells@redhat.com>
2011-01-21microblaze: Use generic irq KconfigThomas Gleixner1-6/+2
No functional change. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Michal Simek <monstr@monstr.eu>
2011-01-21m68knommu: Use generic irq KconfigThomas Gleixner1-4/+1
No functional change. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Greg Ungerer <gerg@uclinux.org>
2011-01-21ia64: Use generic irq KconfigThomas Gleixner1-19/+4
No functional change. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Tony Luck <tony.luck@intel.com>
2011-01-21frv: Use generic irq KconfigThomas Gleixner1-4/+1
No functional change. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: David Howells <dhowells@redhat.com>
2011-01-21blackfin: Use generic irq KconfigThomas Gleixner1-11/+3
No functional change. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Mike Frysinger <vapier@gentoo.org>
2011-01-21alpha: Use generic irq KconfigThomas Gleixner1-13/+3
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Richard Henderson <rth@twiddle.net>
2011-01-21genirq: Remove __do_IRQThomas Gleixner14-47/+0
All architectures are finally converted. Remove the cruft. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Richard Henderson <rth@twiddle.net> Cc: Mike Frysinger <vapier@gentoo.org> Cc: David Howells <dhowells@redhat.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Greg Ungerer <gerg@uclinux.org> Cc: Michal Simek <monstr@monstr.eu> Acked-by: David Howells <dhowells@redhat.com> Cc: Kyle McMartin <kyle@mcmartin.ca> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Chen Liqin <liqin.chen@sunplusct.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Jeff Dike <jdike@addtoit.com>
2011-01-21m32r: Convert to generic irq KconfigThomas Gleixner1-8/+3
Use the generic irq Kconfig. Select GENERIC_HARDIRQS_NO_DEPRECATED as we have converted all irq_chip functions. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Hirokazu Takata <takata@linux-m32r.org> Cc: Paul Mundt <lethal@linux-sh.org>
2011-01-21m32r: Convert usrv platform irq handlingThomas Gleixner1-48/+40
Convert the irq chips to the new functions and use proper flow handlers. handle_level_irq is appropriate. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Hirokazu Takata <takata@linux-m32r.org> Cc: Paul Mundt <lethal@linux-sh.org>
2011-01-21m32r: Convert opsput_lcdpld irq chipThomas Gleixner1-26/+16
Convert the irq chips to the new functions and use proper flow handlers. handle_level_irq is appropriate. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Hirokazu Takata <takata@linux-m32r.org> Cc: Paul Mundt <lethal@linux-sh.org>
2011-01-21m32r: Convert opsput lanpld irq chipThomas Gleixner1-20/+12
Convert the irq chips to the new functions and use proper flow handlers. handle_level_irq is appropriate. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Hirokazu Takata <takata@linux-m32r.org> Cc: Paul Mundt <lethal@linux-sh.org>
2011-01-21m32r: Convert opsput pld irq chipThomas Gleixner1-26/+20
Convert the irq chips to the new functions and use proper flow handlers. handle_level_irq is appropriate. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Hirokazu Takata <takata@linux-m32r.org> Cc: Paul Mundt <lethal@linux-sh.org>
2011-01-21m32r: Convert opsput irq chipThomas Gleixner1-31/+27
Convert the irq chips to the new functions and use proper flow handlers. handle_level_irq is appropriate. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Hirokazu Takata <takata@linux-m32r.org> Cc: Paul Mundt <lethal@linux-sh.org>
2011-01-21m32r: Convert oaks32r irq chipsThomas Gleixner1-25/+22
Convert the irq chips to the new functions and use proper flow handlers. handle_level_irq is appropriate. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Hirokazu Takata <takata@linux-m32r.org> Cc: Paul Mundt <lethal@linux-sh.org>
2011-01-21m32r: Convert mappi3 irq chipThomas Gleixner1-31/+31
Convert the irq chips to the new functions and use proper flow handlers. handle_level_irq is appropriate. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Hirokazu Takata <takata@linux-m32r.org> Cc: Paul Mundt <lethal@linux-sh.org>
2011-01-21m32r: Convert mappi2 irq chipThomas Gleixner1-29/+30
Convert the irq chips to the new functions and use proper flow handlers. handle_level_irq is appropriate. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Hirokazu Takata <takata@linux-m32r.org> Cc: Paul Mundt <lethal@linux-sh.org>
2011-01-21m32r: Convert mappi irq chipsThomas Gleixner1-27/+26
Convert the irq chips to the new functions and use proper flow handlers. handle_level_irq is appropriate. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Hirokazu Takata <takata@linux-m32r.org> Cc: Paul Mundt <lethal@linux-sh.org>
2011-01-21m32r: Convert m32700ut lcdpld irq chipThomas Gleixner1-20/+12
Convert the irq chip to the new functions and use proper flow handlers. handle_level_irq is appropriate. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Hirokazu Takata <takata@linux-m32r.org> Cc: Paul Mundt <lethal@linux-sh.org>
2011-01-21m32r: Convert m32700ut lanpld irq chipThomas Gleixner1-20/+12
Convert the irq chips to the new functions and use proper flow handlers. handle_level_irq is appropriate. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Hirokazu Takata <takata@linux-m32r.org> Cc: Paul Mundt <lethal@linux-sh.org>
2011-01-21m32r: Convert m32700ut pld irq chipThomas Gleixner1-28/+20
Convert the irq chips to the new functions and use proper flow handlers. handle_level_irq is appropriate. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Hirokazu Takata <takata@linux-m32r.org> Cc: Paul Mundt <lethal@linux-sh.org>
2011-01-21m32r: Convert m32104ut irq chipThomas Gleixner1-29/+27
Convert the irq chips to the new functions and use proper flow handlers. handle_level_irq is appropriate. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Hirokazu Takata <takata@linux-m32r.org> Cc: Paul Mundt <lethal@linux-sh.org>
2011-01-21m32r: Convert m32104ut irq handlingThomas Gleixner1-25/+21
Convert the irq chips to the new functions and use proper flow handlers. handle_level_irq is appropriate. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Hirokazu Takata <takata@linux-m32r.org> Cc: Paul Mundt <lethal@linux-sh.org>
2011-01-21m32r: Cleanup direct irq_desc accessThomas Gleixner9-307/+83
The irq descriptors are already initialized by the generic code. Remove the redundant init code and set the irq chip with the proper accessor function. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Hirokazu Takata <takata@linux-m32r.org> Cc: Paul Mundt <lethal@linux-sh.org>
2011-01-21cris: Use generic irq KconfigThomas Gleixner2-5/+3
Use the generic irq Kconfig. Select GENERIC_HARDIRQS_NO_DEPRECATED as we have converted all irq_chip functions. Fix the fallout in show_interrupts(). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Mikael Starvik <starvik@axis.com>
2011-01-21cris: Convert V32 interrupt handlingThomas Gleixner1-35/+15
Convert the irq chip functions and install handle_simple_irq for each interrupt to get rid of __do_IRQ() Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Mikael Starvik <starvik@axis.com>
2011-01-21cris: Convert V10 interrupt handlingThomas Gleixner1-31/+10
Convert the irq_chip functions and install handle_simple_irq for each interrupt. This converts V10 to the flow handling and lets us remove __do_IRQ(). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Mikael Starvik <starvik@axis.com>
2011-01-21cris: Use irq handling wrapperThomas Gleixner1-2/+2
Use the wrapper around __do_IRQ() so we can convert V10 and V32 seperately. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Mikael Starvik <starvik@axis.com>
2011-01-21h8300: Use generic irq KconfigThomas Gleixner2-5/+3
Switch to the generic irq Kconfig. h8300 has all irq chips converted to the new functions, so select the GENERIC_HARDIRQS_NO_DEPRECATED switch as well. Fixup the resulting fallout in show_interrupts(). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Paul Mundt <lethal@linux-sh.org>
2011-01-21h8300: Convert interrupt handling to flow handlerThomas Gleixner1-12/+3
__do_IRQ is deprecated so h8300 needs to be converted to proper flow handling. The irq chip is simple and does not required any mask/ack/eoi functions, so we can use handle_simple_irq. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Paul Mundt <lethal@linux-sh.org>
2011-01-21h8300: Convert to new irq_chip functionsThomas Gleixner1-17/+16
No functional change, just straight forward conversion. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Paul Mundt <lethal@linux-sh.org>
2011-01-21powerpc/mpic: Fix mask/unmask timeout messageScott Wood1-2/+4
Don't say that enable timed out when it was disable, and show which IRQ had the problem. Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-28 23:44:15 +0300