summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)AuthorFilesLines
2022-09-28MIPS: Loongson32: Fix PHY-mode being left unspecifiedSerge Semin1-8/+8
[ Upstream commit e9f3f8f488005f6da3cfb66070706770ecaef747 ] commit 0060c8783330 ("net: stmmac: implement support for passive mode converters via dt") has changed the plat->interface field semantics from containing the PHY-mode to specifying the MAC-PCS interface mode. Due to that the loongson32 platform code will leave the phylink interface uninitialized with the PHY-mode intended by the means of the actual platform setup. The commit-author most likely has just missed the arch-specific code to fix. Let's mend the Loongson32 platform code then by assigning the PHY-mode to the phy_interface field of the STMMAC platform data. Fixes: 0060c8783330 ("net: stmmac: implement support for passive mode converters via dt") Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Signed-off-by: Keguang Zhang <keguang.zhang@gmail.com> Tested-by: Keguang Zhang <keguang.zhang@gmail.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-09-28MIPS: lantiq: export clk_get_io() for lantiq_wdt.koRandy Dunlap1-0/+1
[ Upstream commit 502550123bee6a2ffa438409b5b9aad4d6db3a8c ] The lantiq WDT driver uses clk_get_io(), which is not exported, so export it to fix a build error: ERROR: modpost: "clk_get_io" [drivers/watchdog/lantiq_wdt.ko] undefined! Fixes: 287e3f3f4e68 ("MIPS: lantiq: implement support for clkdev api") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: kernel test robot <lkp@intel.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: John Crispin <john@phrozen.org> Cc: linux-mips@vger.kernel.org Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-09-28arm64: dts: rockchip: Remove 'enable-active-low' from rk3399-pumaFabio Estevam1-1/+0
[ Upstream commit a994b34b9abb9c08ee09e835b4027ff2147f9d94 ] The 'enable-active-low' property is not a valid one. Only 'enable-active-high' is valid, and when this property is absent the gpio regulator will act as active low by default. Remove the invalid 'enable-active-low' property. Fixes: 2c66fc34e945 ("arm64: dts: rockchip: add RK3399-Q7 (Puma) SoM") Signed-off-by: Fabio Estevam <festevam@denx.de> Link: https://lore.kernel.org/r/20220827175140.1696699-1-festevam@denx.de Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-09-28arm64: dts: rockchip: Set RK3399-Gru PCLK_EDP to 24 MHzzain wang1-0/+8
[ Upstream commit 8123437cf46ea5a0f6ca5cb3c528d8b6db97b9c2 ] We've found the AUX channel to be less reliable with PCLK_EDP at a higher rate (typically 25 MHz). This is especially important on systems with PSR-enabled panels (like Gru-Kevin), since we make heavy, constant use of AUX. According to Rockchip, using any rate other than 24 MHz can cause "problems between syncing the PHY an PCLK", which leads to all sorts of unreliabilities around register operations. Fixes: d67a38c5a623 ("arm64: dts: rockchip: move core edp from rk3399-kevin to shared chromebook") Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: zain wang <wzz@rock-chips.com> Signed-off-by: Brian Norris <briannorris@chromium.org> Link: https://lore.kernel.org/r/20220830131212.v2.1.I98d30623f13b785ca77094d0c0fd4339550553b6@changeid Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-09-28arm64: dts: rockchip: Pull up wlan wake# on Gru-BobBrian Norris2-0/+6
[ Upstream commit e5467359a725de90b6b8d0dd865500f6373828ca ] The Gru-Bob board does not have a pull-up resistor on its WLAN_HOST_WAKE# pin, but Kevin does. The production/vendor kernel specified the pin configuration correctly as a pull-up, but this didn't get ported correctly to upstream. This means Bob's WLAN_HOST_WAKE# pin is floating, causing inconsistent wakeup behavior. Note that bt_host_wake_l has a similar dynamic, but apparently the upstream choice was to redundantly configure both internal and external pull-up on Kevin (see the "Kevin has an external pull up" comment in rk3399-gru.dtsi). This doesn't cause any functional problem, although it's perhaps wasteful. Fixes: 8559bbeeb849 ("arm64: dts: rockchip: add Google Bob") Signed-off-by: Brian Norris <briannorris@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20220822164453.1.I75c57b48b0873766ec993bdfb7bc1e63da5a1637@changeid Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-09-28KVM: SEV: add cache flush to solve SEV cache incoherency issuesMingwei Zhang5-0/+18
commit 683412ccf61294d727ead4a73d97397396e69a6b upstream. Flush the CPU caches when memory is reclaimed from an SEV guest (where reclaim also includes it being unmapped from KVM's memslots). Due to lack of coherency for SEV encrypted memory, failure to flush results in silent data corruption if userspace is malicious/broken and doesn't ensure SEV guest memory is properly pinned and unpinned. Cache coherency is not enforced across the VM boundary in SEV (AMD APM vol.2 Section 15.34.7). Confidential cachelines, generated by confidential VM guests have to be explicitly flushed on the host side. If a memory page containing dirty confidential cachelines was released by VM and reallocated to another user, the cachelines may corrupt the new user at a later time. KVM takes a shortcut by assuming all confidential memory remain pinned until the end of VM lifetime. Therefore, KVM does not flush cache at mmu_notifier invalidation events. Because of this incorrect assumption and the lack of cache flushing, malicous userspace can crash the host kernel: creating a malicious VM and continuously allocates/releases unpinned confidential memory pages when the VM is running. Add cache flush operations to mmu_notifier operations to ensure that any physical memory leaving the guest VM get flushed. In particular, hook mmu_notifier_invalidate_range_start and mmu_notifier_release events and flush cache accordingly. The hook after releasing the mmu lock to avoid contention with other vCPUs. Cc: stable@vger.kernel.org Suggested-by: Sean Christpherson <seanjc@google.com> Reported-by: Mingwei Zhang <mizhang@google.com> Signed-off-by: Mingwei Zhang <mizhang@google.com> Message-Id: <20220421031407.2516575-4-mizhang@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> [OP: applied kvm_arch_guest_memory_reclaimed() calls in kvm_set_memslot() and kvm_mmu_notifier_invalidate_range_start(); OP: adjusted kvm_arch_guest_memory_reclaimed() to not use static_call_cond()] Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com> Reviewed-by: Liam Merwick <liam.merwick@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-28riscv: fix a nasty sigreturn bug...Al Viro1-0/+2
commit 762df359aa5849e010ef04c3ed79d57588ce17d9 upstream. riscv has an equivalent of arm bug fixed by 653d48b22166 ("arm: fix really nasty sigreturn bug"); if signal gets caught by an interrupt that hits when we have the right value in a0 (-513), *and* another signal gets delivered upon sigreturn() (e.g. included into the blocked mask for the first signal and posted while the handler had been running), the syscall restart logics will see regs->cause equal to EXC_SYSCALL (we are in a syscall, after all) and a0 already restored to its original value (-513, which happens to be -ERESTARTNOINTR) and assume that we need to apply the usual syscall restart logics. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Fixes: e2c0cdfba7f6 ("RISC-V: User-facing API") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/YxJEiSq%2FCGaL6Gm9@ZenIV/ Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-28arm64/bti: Disable in kernel BTI when cross section thunks are brokenMark Brown1-0/+2
[ Upstream commit c0a454b9044fdc99486853aa424e5b3be2107078 ] GCC does not insert a `bti c` instruction at the beginning of a function when it believes that all callers reach the function through a direct branch[1]. Unfortunately the logic it uses to determine this is not sufficiently robust, for example not taking account of functions being placed in different sections which may be loaded separately, so we may still see thunks being generated to these functions. If that happens, the first instruction in the callee function will result in a Branch Target Exception due to the missing landing pad. While this has currently only been observed in the case of modules having their main code loaded sufficiently far from their init section to require thunks it could potentially happen for other cases so the safest thing is to disable BTI for the kernel when building with an affected toolchain. [1]: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=106671 Reported-by: D Scott Phillips <scott@os.amperecomputing.com> [Bits of the commit message are lifted from his report & workaround] Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20220905142255.591990-1-broonie@kernel.org Cc: <stable@vger.kernel.org> # v5.10+ Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-09-28arm64: Restrict ARM64_BTI_KERNEL to clang 12.0.0 and newerNathan Chancellor1-1/+2
[ Upstream commit 8cdd23c23c3d481a43b4aa03dcb5738812831115 ] Commit 97fed779f2a6 ("arm64: bti: Provide Kconfig for kernel mode BTI") disabled CONFIG_ARM64_BTI_KERNEL when CONFIG_GCOV_KERNEL was enabled and compiling with clang because of warnings that were seen with allmodconfig because LLVM was not emitting PAC/BTI instructions for compiler generated functions: | warning: some functions compiled with BTI and some compiled without BTI | warning: not setting BTI in feature flags This dependency was fine for avoiding the warnings with allmodconfig until commit 51c2ee6d121c ("Kconfig: Introduce ARCH_WANTS_NO_INSTR and CC_HAS_NO_PROFILE_FN_ATTR"), which prevents CONFIG_GCOV_KERNEL from being enabled with clang 12.0.0 or older because those versions do not support the no_profile_instrument_function attribute. As a result, CONFIG_ARM64_BTI_KERNEL gets enabled with allmodconfig and there are more warnings like the ones above due to CONFIG_KASAN, which suffers from the same problem as CONFIG_GCOV_KERNEL. This was most likely not noticed at the time because allmodconfig + CONFIG_GCOV_KERNEL=n was not tested. defconfig + CONFIG_KASAN=y is enough to reproduce the same warnings as above. The root cause of the warnings was resolved in LLVM during the 12.0.0 release so rather than play whack-a-mole with the dependencies, just update CONFIG_ARM64_BTI_KERNEL to require clang 12.0.0, which will have all of the issues ironed out. Link: https://github.com/ClangBuiltLinux/linux/issues/1428 Link: https://github.com/ClangBuiltLinux/continuous-integration2/runs/3010034706?check_suite_focus=true Link: https://github.com/ClangBuiltLinux/continuous-integration2/runs/3010035725?check_suite_focus=true Link: https://github.com/llvm/llvm-project/commit/a88c722e687e6780dcd6a58718350dc76fcc4cc9 Signed-off-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Link: https://lore.kernel.org/r/20210712214636.3134425-1-nathan@kernel.org Signed-off-by: Will Deacon <will@kernel.org> Stable-dep-of: c0a454b9044f ("arm64/bti: Disable in kernel BTI when cross section thunks are broken") Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-09-23MIPS: OCTEON: irq: Fix octeon_irq_force_ciu_mapping()Alexander Sverdlin1-0/+10
[ Upstream commit ba912afbd611d3a5f22af247721a071ad1d5b9e0 ] For irq_domain_associate() to work the virq descriptor has to be pre-allocated in advance. Otherwise the following happens: WARNING: CPU: 0 PID: 0 at .../kernel/irq/irqdomain.c:527 irq_domain_associate+0x298/0x2e8 error: virq128 is not allocated Modules linked in: CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.19.78-... #1 ... Call Trace: [<ffffffff801344c4>] show_stack+0x9c/0x130 [<ffffffff80769550>] dump_stack+0x90/0xd0 [<ffffffff801576d0>] __warn+0x118/0x130 [<ffffffff80157734>] warn_slowpath_fmt+0x4c/0x70 [<ffffffff801b83c0>] irq_domain_associate+0x298/0x2e8 [<ffffffff80a43bb8>] octeon_irq_init_ciu+0x4c8/0x53c [<ffffffff80a76cbc>] of_irq_init+0x1e0/0x388 [<ffffffff80a452cc>] init_IRQ+0x4c/0xf4 [<ffffffff80a3cc00>] start_kernel+0x404/0x698 Use irq_alloc_desc_at() to avoid the above problem. Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-09-23powerpc/pseries/mobility: ignore ibm, platform-facilities updatesNathan Lynch1-0/+34
[ Upstream commit 319fa1a52e438a6e028329187783a25ad498c4e6 ] On VMs with NX encryption, compression, and/or RNG offload, these capabilities are described by nodes in the ibm,platform-facilities device tree hierarchy: $ tree -d /sys/firmware/devicetree/base/ibm,platform-facilities/ /sys/firmware/devicetree/base/ibm,platform-facilities/ ├── ibm,compression-v1 ├── ibm,random-v1 └── ibm,sym-encryption-v1 3 directories The acceleration functions that these nodes describe are not disrupted by live migration, not even temporarily. But the post-migration ibm,update-nodes sequence firmware always sends "delete" messages for this hierarchy, followed by an "add" directive to reconstruct it via ibm,configure-connector (log with debugging statements enabled in mobility.c): mobility: removing node /ibm,platform-facilities/ibm,random-v1:4294967285 mobility: removing node /ibm,platform-facilities/ibm,compression-v1:4294967284 mobility: removing node /ibm,platform-facilities/ibm,sym-encryption-v1:4294967283 mobility: removing node /ibm,platform-facilities:4294967286 ... mobility: added node /ibm,platform-facilities:4294967286 Note we receive a single "add" message for the entire hierarchy, and what we receive from the ibm,configure-connector sequence is the top-level platform-facilities node along with its three children. The debug message simply reports the parent node and not the whole subtree. Also, significantly, the nodes added are almost completely equivalent to the ones removed; even phandles are unchanged. ibm,shared-interrupt-pool in the leaf nodes is the only property I've observed to differ, and Linux does not use that. So in practice, the sum of update messages Linux receives for this hierarchy is equivalent to minor property updates. We succeed in removing the original hierarchy from the device tree. But the vio bus code is ignorant of this, and does not unbind or relinquish its references. The leaf nodes, still reachable through sysfs, of course still refer to the now-freed ibm,platform-facilities parent node, which makes use-after-free possible: refcount_t: addition on 0; use-after-free. WARNING: CPU: 3 PID: 1706 at lib/refcount.c:25 refcount_warn_saturate+0x164/0x1f0 refcount_warn_saturate+0x160/0x1f0 (unreliable) kobject_get+0xf0/0x100 of_node_get+0x30/0x50 of_get_parent+0x50/0xb0 of_fwnode_get_parent+0x54/0x90 fwnode_count_parents+0x50/0x150 fwnode_full_name_string+0x30/0x110 device_node_string+0x49c/0x790 vsnprintf+0x1c0/0x4c0 sprintf+0x44/0x60 devspec_show+0x34/0x50 dev_attr_show+0x40/0xa0 sysfs_kf_seq_show+0xbc/0x200 kernfs_seq_show+0x44/0x60 seq_read_iter+0x2a4/0x740 kernfs_fop_read_iter+0x254/0x2e0 new_sync_read+0x120/0x190 vfs_read+0x1d0/0x240 Moreover, the "new" replacement subtree is not correctly added to the device tree, resulting in ibm,platform-facilities parent node without the appropriate leaf nodes, and broken symlinks in the sysfs device hierarchy: $ tree -d /sys/firmware/devicetree/base/ibm,platform-facilities/ /sys/firmware/devicetree/base/ibm,platform-facilities/ 0 directories $ cd /sys/devices/vio ; find . -xtype l -exec file {} + ./ibm,sym-encryption-v1/of_node: broken symbolic link to ../../../firmware/devicetree/base/ibm,platform-facilities/ibm,sym-encryption-v1 ./ibm,random-v1/of_node: broken symbolic link to ../../../firmware/devicetree/base/ibm,platform-facilities/ibm,random-v1 ./ibm,compression-v1/of_node: broken symbolic link to ../../../firmware/devicetree/base/ibm,platform-facilities/ibm,compression-v1 This is because add_dt_node() -> dlpar_attach_node() attaches only the parent node returned from configure-connector, ignoring any children. This should be corrected for the general case, but fixing that won't help with the stale OF node references, which is the more urgent problem. One way to address that would be to make the drivers respond to node removal notifications, so that node references can be dropped appropriately. But this would likely force the drivers to disrupt active clients for no useful purpose: equivalent nodes are immediately re-added. And recall that the acceleration capabilities described by the nodes remain available throughout the whole process. The solution I believe to be robust for this situation is to convert remove+add of a node with an unchanged phandle to an update of the node's properties in the Linux device tree structure. That would involve changing and adding a fair amount of code, and may take several iterations to land. Until that can be realized we have a confirmed use-after-free and the possibility of memory corruption. So add a limited workaround that discriminates on the node type, ignoring adds and removes. This should be amenable to backporting in the meantime. Fixes: 410bccf97881 ("powerpc/pseries: Partition migration in the kernel") Cc: stable@vger.kernel.org Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20211020194703.2613093-1-nathanl@linux.ibm.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-09-23powerpc/pseries/mobility: refactor node lookup during DT updateNathan Lynch1-32/+17
[ Upstream commit 2efd7f6eb9b7107e469837d8452e750d7d080a5d ] In pseries_devicetree_update(), with each call to ibm,update-nodes the partition firmware communicates the node to be deleted or updated by placing its phandle in the work buffer. Each of delete_dt_node(), update_dt_node(), and add_dt_node() have duplicate lookups using the phandle value and corresponding refcount management. Move the lookup and of_node_put() into pseries_devicetree_update(), and emit a warning on any failed lookups. Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20201207215200.1785968-29-nathanl@linux.ibm.com Stable-dep-of: 319fa1a52e43 ("powerpc/pseries/mobility: ignore ibm, platform-facilities updates") Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-09-23parisc: Flush kernel data mapping in set_pte_at() when installing pte for ↵John David Anglin2-4/+10
user page [ Upstream commit 38860b2c8bb1b92f61396eb06a63adff916fc31d ] For years, there have been random segmentation faults in userspace on SMP PA-RISC machines. It occurred to me that this might be a problem in set_pte_at(). MIPS and some other architectures do cache flushes when installing PTEs with the present bit set. Here I have adapted the code in update_mmu_cache() to flush the kernel mapping when the kernel flush is deferred, or when the kernel mapping may alias with the user mapping. This simplifies calls to update_mmu_cache(). I also changed the barrier in set_pte() from a compiler barrier to a full memory barrier. I know this change is not sufficient to fix the problem. It might not be needed. I have had a few days of operation with 5.14.16 to 5.15.1 and haven't seen any random segmentation faults on rp3440 or c8000 so far. Signed-off-by: John David Anglin <dave.anglin@bell.net> Signed-off-by: Helge Deller <deller@gmx.de> Cc: stable@kernel.org # 5.12+ Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-09-23parisc: Optimize per-pagetable spinlocksHelge Deller9-214/+110
[ Upstream commit b7795074a04669d0a023babf786d29bf67c68783 ] On parisc a spinlock is stored in the next page behind the pgd which protects against parallel accesses to the pgd. That's why one additional page (PGD_ALLOC_ORDER) is allocated for the pgd. Matthew Wilcox suggested that we instead should use a pointer in the struct page table for this spinlock and noted, that the comments for the PGD_ORDER and PMD_ORDER defines were wrong. Both suggestions are addressed with this patch. Instead of having an own spinlock to protect the pgd, we now switch to use the existing page_table_lock. Additionally, beside loading the pgd into cr25 in switch_mm_irqs_off(), the physical address of this lock is loaded into cr28 (tr4), so that we can avoid implementing a complicated lookup in assembly for this lock in the TLB fault handlers. The existing Hybrid L2/L3 page table scheme (where the pmd is adjacent to the pgd) has been dropped with this patch. Remove the locking in set_pte() and the huge-page pte functions too. They trigger a spinlock recursion on 32bit machines and seem unnecessary. Suggested-by: Matthew Wilcox <willy@infradead.org> Fixes: b37d1c1898b2 ("parisc: Use per-pagetable spinlock") Signed-off-by: John David Anglin <dave.anglin@bell.net> Signed-off-by: Helge Deller <deller@gmx.de> Stable-dep-of: 38860b2c8bb1 ("parisc: Flush kernel data mapping in set_pte_at() when installing pte for user page") Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-09-23KVM: PPC: Tick accounting should defer vtime accounting 'til after IRQ handlingLaurent Vivier2-3/+43
[ Upstream commit 235cee162459d96153d63651ce7ff51752528c96 ] Commit 112665286d08 ("KVM: PPC: Book3S HV: Context tracking exit guest context before enabling irqs") moved guest_exit() into the interrupt protected area to avoid wrong context warning (or worse). The problem is that tick-based time accounting has not yet been updated at this point (because it depends on the timer interrupt firing), so the guest time gets incorrectly accounted to system time. To fix the problem, follow the x86 fix in commit 160457140187 ("Defer vtime accounting 'til after IRQ handling"), and allow host IRQs to run before accounting the guest exit time. In the case vtime accounting is enabled, this is not required because TB is used directly for accounting. Before this patch, with CONFIG_TICK_CPU_ACCOUNTING=y in the host and a guest running a kernel compile, the 'guest' fields of /proc/stat are stuck at zero. With the patch they can be observed increasing roughly as expected. Fixes: e233d54d4d97 ("KVM: booke: use __kvm_guest_exit") Fixes: 112665286d08 ("KVM: PPC: Book3S HV: Context tracking exit guest context before enabling irqs") Cc: stable@vger.kernel.org # 5.12+ Signed-off-by: Laurent Vivier <lvivier@redhat.com> [np: only required for tick accounting, add Book3E fix, tweak changelog] Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20211027142150.3711582-1-npiggin@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-09-23KVM: PPC: Book3S HV: Context tracking exit guest context before enabling irqsNicholas Piggin1-2/+4
[ Upstream commit 112665286d08c87e66d699e7cba43c1497ad165f ] Interrupts that occur in kernel mode expect that context tracking is set to kernel. Enabling local irqs before context tracking switches from guest to host means interrupts can come in and trigger warnings about wrong context, and possibly worse. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210130130852.2952424-3-npiggin@gmail.com Stable-dep-of: 235cee162459 ("KVM: PPC: Tick accounting should defer vtime accounting 'til after IRQ handling") Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-09-20x86/ftrace: Use alternative RET encodingPeter Zijlstra1-2/+7
commit 1f001e9da6bbf482311e45e48f53c2bd2179e59c upstream. Use the return thunk in ftrace trampolines, if needed. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org> Signed-off-by: Borislav Petkov <bp@suse.de> [cascardo: use memcpy(text_gen_insn) as there is no __text_gen_insn] Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com> Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-20x86/ibt,ftrace: Make function-graph play nicePeter Zijlstra2-11/+17
commit e52fc2cf3f662828cc0d51c4b73bed73ad275fce upstream. Return trampoline must not use indirect branch to return; while this preserves the RSB, it is fundamentally incompatible with IBT. Instead use a retpoline like ROP gadget that defeats IBT while not unbalancing the RSB. And since ftrace_stub is no longer a plain RET, don't use it to copy from. Since RET is a trivial instruction, poke it directly. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Link: https://lore.kernel.org/r/20220308154318.347296408@infradead.org [cascardo: remove ENDBR] Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com> [OP: adjusted context for 5.10-stable] Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-20Revert "x86/ftrace: Use alternative RET encoding"Thadeu Lima de Souza Cascardo1-5/+2
This reverts commit 00b136bb6254e0abf6aaafe62c4da5f6c4fea4cb. This temporarily reverts the backport of upstream commit 1f001e9da6bbf482311e45e48f53c2bd2179e59c. It was not correct to copy the ftrace stub as it would contain a relative jump to the return thunk which would not apply to the context where it was being copied to, leading to ftrace support to be broken. Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com> Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-20ARM: dts: imx6qdl-kontron-samx6i: fix spi-flash compatibleMarco Felsch1-1/+1
[ Upstream commit af7d78c957017f8b3a0986769f6f18e57f9362ea ] Drop the "winbond,w25q16dw" compatible since it causes to set the MODALIAS to w25q16dw which is not specified within spi-nor id table. Fix this by use the common "jedec,spi-nor" compatible. Fixes: 2125212785c9 ("ARM: dts: imx6qdl-kontron-samx6i: add Kontron SMARC SoM Support") Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-09-20ARM: dts: imx: align SPI NOR node name with dtschemaKrzysztof Kozlowski32-34/+34
[ Upstream commit ba9fe460dc2cfe90dc115b22af14dd3f13cffa0f ] The node names should be generic and SPI NOR dtschema expects "flash". Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org> Stable-dep-of: af7d78c95701 ("ARM: dts: imx6qdl-kontron-samx6i: fix spi-flash compatible") Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-09-15arm64: errata: add detection for AMEVCNTR01 incrementing incorrectlyIonela Voinescu4-2/+33
commit e89d120c4b720e232cc6a94f0fcbd59c15d41489 upstream. The AMU counter AMEVCNTR01 (constant counter) should increment at the same rate as the system counter. On affected Cortex-A510 cores, AMEVCNTR01 increments incorrectly giving a significantly higher output value. This results in inaccurate task scheduler utilization tracking and incorrect feedback on CPU frequency. Work around this problem by returning 0 when reading the affected counter in key locations that results in disabling all users of this counter from using it either for frequency invariance or as FFH reference counter. This effect is the same to firmware disabling affected counters. Details on how the two features are affected by this erratum: - AMU counters will not be used for frequency invariance for affected CPUs and CPUs in the same cpufreq policy. AMUs can still be used for frequency invariance for unaffected CPUs in the system. Although unlikely, if no alternative method can be found to support frequency invariance for affected CPUs (cpufreq based or solution based on platform counters) frequency invariance will be disabled. Please check the chapter on frequency invariance at Documentation/scheduler/sched-capacity.rst for details of its effect. - Given that FFH can be used to fetch either the core or constant counter values, restrictions are lifted regarding any of these counters returning a valid (!0) value. Therefore FFH is considered supported if there is a least one CPU that support AMUs, independent of any counters being disabled or affected by this erratum. Clarifying comments are now added to the cpc_ffh_supported(), cpu_read_constcnt() and cpu_read_corecnt() functions. The above is achieved through adding a new erratum: ARM64_ERRATUM_2457168. Signed-off-by: Ionela Voinescu <ionela.voinescu@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will@kernel.org> Cc: James Morse <james.morse@arm.com> Link: https://lore.kernel.org/r/20220819103050.24211-1-ionela.voinescu@arm.com Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-15MIPS: loongson32: ls1c: Fix hang during startupYang Ling1-1/+0
[ Upstream commit 35508d2424097f9b6a1a17aac94f702767035616 ] The RTCCTRL reg of LS1C is obselete. Writing this reg will cause system hang. Fixes: 60219c563c9b6 ("MIPS: Add RTC support for Loongson1C board") Signed-off-by: Yang Ling <gnaygnil@gmail.com> Tested-by: Keguang Zhang <keguang.zhang@gmail.com> Acked-by: Keguang Zhang <keguang.zhang@gmail.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-09-15ARM: dts: at91: sama5d2_icp: don't keep vdd_other enabled all the timeClaudiu Beznea1-1/+0
[ Upstream commit 3d074b750d2b4c91962f10ea1df1c289ce0d3ce8 ] VDD_OTHER is not connected to any on board consumer thus it is not needed to keep it enabled all the time. Fixes: 68a95ef72cef ("ARM: dts: at91: sama5d2-icp: add SAMA5D2-ICP") Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20220826083927.3107272-9-claudiu.beznea@microchip.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-09-15ARM: dts: at91: sama5d27_wlsom1: don't keep ldo2 enabled all the timeClaudiu Beznea1-1/+0
[ Upstream commit 617a0d9fe6867bf5b3b7272629cd780c27c877d9 ] ldo2 is not used by any consumer on sama5d27_wlsom1 board, thus don't keep it enabled all the time. Fixes: 5d4c3cfb63fe ("ARM: dts: at91: sama5d27_wlsom1: add SAMA5D27 wlsom1 and wlsom1-ek") Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20220826083927.3107272-8-claudiu.beznea@microchip.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-09-15ARM: dts: at91: sama5d2_icp: specify proper regulator output rangesClaudiu Beznea1-10/+10
[ Upstream commit 7737d93666eea282febf95e5fa3b3fde1f2549f3 ] Min and max output ranges of regulators need to satisfy board requirements not PMIC requirements. Thus adjust device tree to cope with this. Fixes: 68a95ef72cef ("ARM: dts: at91: sama5d2-icp: add SAMA5D2-ICP") Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20220826083927.3107272-6-claudiu.beznea@microchip.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-09-15ARM: dts: at91: sama5d27_wlsom1: specify proper regulator output rangesClaudiu Beznea1-10/+10
[ Upstream commit addf7efec23af2b67547800aa232d551945e7de2 ] Min and max output ranges of regulators need to satisfy board requirements not PMIC requirements. Thus adjust device tree to cope with this. Fixes: 5d4c3cfb63fe ("ARM: dts: at91: sama5d27_wlsom1: add SAMA5D27 wlsom1 and wlsom1-ek") Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20220826083927.3107272-5-claudiu.beznea@microchip.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-09-15ARM: dts: imx6qdl-kontron-samx6i: remove duplicated nodeMarco Felsch1-10/+0
[ Upstream commit 204f67d86f55dd4fa757ed04757d7273f71a169c ] The regulator node 'regulator-3p3v-s0' was dupplicated. Remove it to clean the DTS. Fixes: 2a51f9dae13d ("ARM: dts: imx6qdl-kontron-samx6i: Add iMX6-based Kontron SMARC-sAMX6i module") Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-09-15arm64: cacheinfo: Fix incorrect assignment of signed error value to unsigned ↵Sudeep Holla1-1/+5
fw_level [ Upstream commit e75d18cecbb3805895d8ed64da4f78575ec96043 ] Though acpi_find_last_cache_level() always returned signed value and the document states it will return any errors caused by lack of a PPTT table, it never returned negative values before. Commit 0c80f9e165f8 ("ACPI: PPTT: Leave the table mapped for the runtime usage") however changed it by returning -ENOENT if no PPTT was found. The value returned from acpi_find_last_cache_level() is then assigned to unsigned fw_level. It will result in the number of cache leaves calculated incorrectly as a huge value which will then cause the following warning from __alloc_pages as the order would be great than MAX_ORDER because of incorrect and huge cache leaves value. | WARNING: CPU: 0 PID: 1 at mm/page_alloc.c:5407 __alloc_pages+0x74/0x314 | Modules linked in: | CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.19.0-10393-g7c2a8d3ac4c0 #73 | pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) | pc : __alloc_pages+0x74/0x314 | lr : alloc_pages+0xe8/0x318 | Call trace: | __alloc_pages+0x74/0x314 | alloc_pages+0xe8/0x318 | kmalloc_order_trace+0x68/0x1dc | __kmalloc+0x240/0x338 | detect_cache_attributes+0xe0/0x56c | update_siblings_masks+0x38/0x284 | store_cpu_topology+0x78/0x84 | smp_prepare_cpus+0x48/0x134 | kernel_init_freeable+0xc4/0x14c | kernel_init+0x2c/0x1b4 | ret_from_fork+0x10/0x20 Fix the same by changing fw_level to be signed integer and return the error from init_cache_level() early in case of error. Reported-and-Tested-by: Bruno Goncalves <bgoncalv@redhat.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Link: https://lore.kernel.org/r/20220808084640.3165368-1-sudeep.holla@arm.com Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-09-15parisc: Add runtime check to prevent PA2.0 kernels on PA1.x machinesHelge Deller1-1/+42
[ Upstream commit 591d2108f3abc4db9f9073cae37cf3591fd250d6 ] If a 32-bit kernel was compiled for PA2.0 CPUs, it won't be able to run on machines with PA1.x CPUs. Add a check and bail out early if a PA1.x machine is detected. Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-09-08s390: fix nospec table alignmentsJosh Poimboeuf1-0/+1
commit c9305b6c1f52060377c72aebe3a701389e9f3172 upstream. Add proper alignment for .nospec_call_table and .nospec_return_table in vmlinux. [hca@linux.ibm.com]: The problem with the missing alignment of the nospec tables exist since a long time, however only since commit e6ed91fd0768 ("s390/alternatives: remove padding generation code") and with CONFIG_RELOCATABLE=n the kernel may also crash at boot time. The above named commit reduced the size of struct alt_instr by one byte, so its new size is 11 bytes. Therefore depending on the number of cpu alternatives the size of the __alt_instructions array maybe odd, which again also causes that the addresses of the nospec tables will be odd. If the address of __nospec_call_start is odd and the kernel is compiled With CONFIG_RELOCATABLE=n the compiler may generate code that loads the address of __nospec_call_start with a 'larl' instruction. This will generate incorrect code since the 'larl' instruction only works with even addresses. In result the members of the nospec tables will be accessed with an off-by-one offset, which subsequently may lead to addressing exceptions within __nospec_revert(). Fixes: f19fbd5ed642 ("s390: introduce execute-trampolines for branches") Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org> Link: https://lore.kernel.org/r/8719bf1ce4a72ebdeb575200290094e9ce047bcc.1661557333.git.jpoimboe@kernel.org Cc: <stable@vger.kernel.org> # 4.16 Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-08s390/hugetlb: fix prepare_hugepage_range() check for 2 GB hugepagesGerald Schaefer1-2/+4
commit 7c8d42fdf1a84b1a0dd60d6528309c8ec127e87c upstream. The alignment check in prepare_hugepage_range() is wrong for 2 GB hugepages, it only checks for 1 MB hugepage alignment. This can result in kernel crash in __unmap_hugepage_range() at the BUG_ON(start & ~huge_page_mask(h)) alignment check, for mappings created with MAP_FIXED at unaligned address. Fix this by correctly handling multiple hugepage sizes, similar to the generic version of prepare_hugepage_range(). Fixes: d08de8e2d867 ("s390/mm: add support for 2GB hugepages") Cc: <stable@vger.kernel.org> # 4.8+ Acked-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-08mm: pagewalk: Fix race between unmap and page walkerSteven Price1-2/+2
[ Upstream commit 8782fb61cc848364e1e1599d76d3c9dd58a1cc06 ] The mmap lock protects the page walker from changes to the page tables during the walk. However a read lock is insufficient to protect those areas which don't have a VMA as munmap() detaches the VMAs before downgrading to a read lock and actually tearing down PTEs/page tables. For users of walk_page_range() the solution is to simply call pte_hole() immediately without checking the actual page tables when a VMA is not present. We now never call __walk_page_range() without a valid vma. For walk_page_range_novma() the locking requirements are tightened to require the mmap write lock to be taken, and then walking the pgd directly with 'no_vma' set. This in turn means that all page walkers either have a valid vma, or it's that special 'novma' case for page table debugging. As a result, all the odd '(!walk->vma && !walk->no_vma)' tests can be removed. Fixes: dd2283f2605e ("mm: mmap: zap pages with read mmap_sem in munmap") Reported-by: Jann Horn <jannh@google.com> Signed-off-by: Steven Price <steven.price@arm.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-09-08KVM: x86: Mask off unsupported and unknown bits of IA32_ARCH_CAPABILITIESJim Mattson1-4/+21
[ Upstream commit 0204750bd4c6ccc2fb7417618477f10373b33f56 ] KVM should not claim to virtualize unknown IA32_ARCH_CAPABILITIES bits. When kvm_get_arch_capabilities() was originally written, there were only a few bits defined in this MSR, and KVM could virtualize all of them. However, over the years, several bits have been defined that KVM cannot just blindly pass through to the guest without additional work (such as virtualizing an MSR promised by the IA32_ARCH_CAPABILITES feature bit). Define a mask of supported IA32_ARCH_CAPABILITIES bits, and mask off any other bits that are set in the hardware MSR. Cc: Paolo Bonzini <pbonzini@redhat.com> Fixes: 5b76a3cff011 ("KVM: VMX: Tell the nested hypervisor to skip L1D flush on vmentry") Signed-off-by: Jim Mattson <jmattson@google.com> Reviewed-by: Vipin Sharma <vipinsh@google.com> Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com> Message-Id: <20220830174947.2182144-1-jmattson@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-09-08powerpc: align syscall table for ppc32Masahiro Yamada1-0/+1
commit c7acee3d2f128a38b68fb7af85dbbd91bfd0b4ad upstream. Christophe Leroy reported that commit 7b4537199a4a ("kbuild: link symbol CRCs at final link, removing CONFIG_MODULE_REL_CRCS") broke mpc85xx_defconfig + CONFIG_RELOCATABLE=y. LD vmlinux SYSMAP System.map SORTTAB vmlinux CHKREL vmlinux WARNING: 451 bad relocations c0b312a9 R_PPC_UADDR32 .head.text-0x3ff9ed54 c0b312ad R_PPC_UADDR32 .head.text-0x3ffac224 c0b312b1 R_PPC_UADDR32 .head.text-0x3ffb09f4 c0b312b5 R_PPC_UADDR32 .head.text-0x3fe184dc c0b312b9 R_PPC_UADDR32 .head.text-0x3fe183a8 ... The compiler emits a bunch of R_PPC_UADDR32, which is not supported by arch/powerpc/kernel/reloc_32.S. The reason is there exists an unaligned symbol. $ powerpc-linux-gnu-nm -n vmlinux ... c0b31258 d spe_aligninfo c0b31298 d __func__.0 c0b312a9 D sys_call_table c0b319b8 d __func__.0 Commit 7b4537199a4a is not the root cause. Even before that, I can reproduce the same issue for mpc85xx_defconfig + CONFIG_RELOCATABLE=y + CONFIG_MODVERSIONS=n. It is just that nobody noticed because when CONFIG_MODVERSIONS is enabled, a __crc_* symbol inserted before sys_call_table was hiding the unalignment issue. Adding alignment to the syscall table for ppc32 fixes the issue. Cc: stable@vger.kernel.org Reported-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Tested-by: Christophe Leroy <christophe.leroy@csgroup.eu> [mpe: Trim change log discussion, add Cc stable] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/lkml/38605f6a-a568-f884-f06f-ea4da5b214f0@csgroup.eu/ Link: https://lore.kernel.org/r/20220820165129.1147589-1-masahiroy@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-05s390/hypfs: avoid error message under KVMJuergen Gross2-2/+2
[ Upstream commit 7b6670b03641ac308aaa6fa2e6f964ac993b5ea3 ] When booting under KVM the following error messages are issued: hypfs.7f5705: The hardware system does not support hypfs hypfs.7a79f0: Initialization of hypfs failed with rc=-61 Demote the severity of first message from "error" to "info" and issue the second message only in other error cases. Signed-off-by: Juergen Gross <jgross@suse.com> Acked-by: Heiko Carstens <hca@linux.ibm.com> Acked-by: Christian Borntraeger <borntraeger@linux.ibm.com> Link: https://lore.kernel.org/r/20220620094534.18967-1-jgross@suse.com [arch/s390/hypfs/hypfs_diag.c changed description] Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-09-05s390/mm: do not trigger write fault when vma does not allow VM_WRITEGerald Schaefer1-1/+3
commit 41ac42f137080bc230b5882e3c88c392ab7f2d32 upstream. For non-protection pXd_none() page faults in do_dat_exception(), we call do_exception() with access == (VM_READ | VM_WRITE | VM_EXEC). In do_exception(), vma->vm_flags is checked against that before calling handle_mm_fault(). Since commit 92f842eac7ee3 ("[S390] store indication fault optimization"), we call handle_mm_fault() with FAULT_FLAG_WRITE, when recognizing that it was a write access. However, the vma flags check is still only checking against (VM_READ | VM_WRITE | VM_EXEC), and therefore also calling handle_mm_fault() with FAULT_FLAG_WRITE in cases where the vma does not allow VM_WRITE. Fix this by changing access check in do_exception() to VM_WRITE only, when recognizing write access. Link: https://lkml.kernel.org/r/20220811103435.188481-3-david@redhat.com Fixes: 92f842eac7ee3 ("[S390] store indication fault optimization") Cc: <stable@vger.kernel.org> Reported-by: David Hildenbrand <david@redhat.com> Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-05x86/nospec: Fix i386 RSB stuffingPeter Zijlstra1-0/+12
commit 332924973725e8cdcc783c175f68cf7e162cb9e5 upstream. Turns out that i386 doesn't unconditionally have LFENCE, as such the loop in __FILL_RETURN_BUFFER isn't actually speculation safe on such chips. Fixes: ba6e31af2be9 ("x86/speculation: Add LFENCE to RSB fill sequence") Reported-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/Yv9tj9vbQ9nNlXoY@worktop.programming.kicks-ass.net Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-05x86/nospec: Unwreck the RSB stuffingPeter Zijlstra1-41/+39
commit 4e3aa9238277597c6c7624f302d81a7b568b6f2d upstream. Commit 2b1299322016 ("x86/speculation: Add RSB VM Exit protections") made a right mess of the RSB stuffing, rewrite the whole thing to not suck. Thanks to Andrew for the enlightening comment about Post-Barrier RSB things so we can make this code less magical. Cc: stable@vger.kernel.org Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/YvuNdDWoUZSBjYcm@worktop.programming.kicks-ass.net [bwh: Backported to 5.10: adjust context] Signed-off-by: Ben Hutchings <benh@debian.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-31perf/x86/intel/uncore: Fix broken read_counter() for SNB IMC PMUStephane Eranian1-1/+17
commit 11745ecfe8fea4b4a4c322967a7605d2ecbd5080 upstream. Existing code was generating bogus counts for the SNB IMC bandwidth counters: $ perf stat -a -I 1000 -e uncore_imc/data_reads/,uncore_imc/data_writes/ 1.000327813 1,024.03 MiB uncore_imc/data_reads/ 1.000327813 20.73 MiB uncore_imc/data_writes/ 2.000580153 261,120.00 MiB uncore_imc/data_reads/ 2.000580153 23.28 MiB uncore_imc/data_writes/ The problem was introduced by commit: 07ce734dd8ad ("perf/x86/intel/uncore: Clean up client IMC") Where the read_counter callback was replace to point to the generic uncore_mmio_read_counter() function. The SNB IMC counters are freerunnig 32-bit counters laid out contiguously in MMIO. But uncore_mmio_read_counter() is using a readq() call to read from MMIO therefore reading 64-bit from MMIO. Although this is okay for the uncore_perf_event_update() function because it is shifting the value based on the actual counter width to compute a delta, it is not okay for the uncore_pmu_event_start() which is simply reading the counter and therefore priming the event->prev_count with a bogus value which is responsible for causing bogus deltas in the perf stat command above. The fix is to reintroduce the custom callback for read_counter for the SNB IMC PMU and use readl() instead of readq(). With the change the output of perf stat is back to normal: $ perf stat -a -I 1000 -e uncore_imc/data_reads/,uncore_imc/data_writes/ 1.000120987 296.94 MiB uncore_imc/data_reads/ 1.000120987 138.42 MiB uncore_imc/data_writes/ 2.000403144 175.91 MiB uncore_imc/data_reads/ 2.000403144 68.50 MiB uncore_imc/data_writes/ Fixes: 07ce734dd8ad ("perf/x86/intel/uncore: Clean up client IMC") Signed-off-by: Stephane Eranian <eranian@google.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Kan Liang <kan.liang@linux.intel.com> Link: https://lore.kernel.org/r/20220803160031.1379788-1-eranian@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-31arm64: Fix match_list for erratum 1286807 on Arm Cortex-A76Zenghui Yu1-0/+2
commit 5e1e087457c94ad7fafbe1cf6f774c6999ee29d4 upstream. Since commit 51f559d66527 ("arm64: Enable repeat tlbi workaround on KRYO4XX gold CPUs"), we failed to detect erratum 1286807 on Cortex-A76 because its entry in arm64_repeat_tlbi_list[] was accidently corrupted by this commit. Fix this issue by creating a separate entry for Kryo4xx Gold. Fixes: 51f559d66527 ("arm64: Enable repeat tlbi workaround on KRYO4XX gold CPUs") Cc: Shreyas K K <quic_shrekk@quicinc.com> Signed-off-by: Zenghui Yu <yuzenghui@huawei.com> Acked-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220809043848.969-1-yuzenghui@huawei.com Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-31s390: fix double free of GS and RI CBs on fork() failureBrian Foster1-6/+16
commit 13cccafe0edcd03bf1c841de8ab8a1c8e34f77d9 upstream. The pointers for guarded storage and runtime instrumentation control blocks are stored in the thread_struct of the associated task. These pointers are initially copied on fork() via arch_dup_task_struct() and then cleared via copy_thread() before fork() returns. If fork() happens to fail after the initial task dup and before copy_thread(), the newly allocated task and associated thread_struct memory are freed via free_task() -> arch_release_task_struct(). This results in a double free of the guarded storage and runtime info structs because the fields in the failed task still refer to memory associated with the source task. This problem can manifest as a BUG_ON() in set_freepointer() (with CONFIG_SLAB_FREELIST_HARDENED enabled) or KASAN splat (if enabled) when running trinity syscall fuzz tests on s390x. To avoid this problem, clear the associated pointer fields in arch_dup_task_struct() immediately after the new task is copied. Note that the RI flag is still cleared in copy_thread() because it resides in thread stack memory and that is where stack info is copied. Signed-off-by: Brian Foster <bfoster@redhat.com> Fixes: 8d9047f8b967c ("s390/runtime instrumentation: simplify task exit handling") Fixes: 7b83c6297d2fc ("s390/guarded storage: simplify task exit handling") Cc: <stable@vger.kernel.org> # 4.15 Reviewed-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Link: https://lore.kernel.org/r/20220816155407.537372-1-bfoster@redhat.com Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-31x86/bugs: Add "unknown" reporting for MMIO Stale DataPawan Gupta3-19/+42
commit 7df548840c496b0141fb2404b889c346380c2b22 upstream. Older Intel CPUs that are not in the affected processor list for MMIO Stale Data vulnerabilities currently report "Not affected" in sysfs, which may not be correct. Vulnerability status for these older CPUs is unknown. Add known-not-affected CPUs to the whitelist. Report "unknown" mitigation status for CPUs that are not in blacklist, whitelist and also don't enumerate MSR ARCH_CAPABILITIES bits that reflect hardware immunity to MMIO Stale Data vulnerabilities. Mitigation is not deployed when the status is unknown. [ bp: Massage, fixup. ] Fixes: 8d50cdf8b834 ("x86/speculation/mmio: Add sysfs reporting for Processor MMIO Stale Data") Suggested-by: Andrew Cooper <andrew.cooper3@citrix.com> Suggested-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/a932c154772f2121794a5f2eded1a11013114711.1657846269.git.pawan.kumar.gupta@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-31x86/unwind/orc: Unwind ftrace trampolines with correct ORC entryChen Zhongjin1-5/+10
commit fc2e426b1161761561624ebd43ce8c8d2fa058da upstream. When meeting ftrace trampolines in ORC unwinding, unwinder uses address of ftrace_{regs_}call address to find the ORC entry, which gets next frame at sp+176. If there is an IRQ hitting at sub $0xa8,%rsp, the next frame should be sp+8 instead of 176. It makes unwinder skip correct frame and throw warnings such as "wrong direction" or "can't access registers", etc, depending on the content of the incorrect frame address. By adding the base address ftrace_{regs_}caller with the offset *ip - ops->trampoline*, we can get the correct address to find the ORC entry. Also change "caller" to "tramp_addr" to make variable name conform to its content. [ mingo: Clarified the changelog a bit. ] Fixes: 6be7fa3c74d1 ("ftrace, orc, x86: Handle ftrace dynamically allocated trampolines") Signed-off-by: Chen Zhongjin <chenzhongjin@huawei.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20220819084334.244016-1-chenzhongjin@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-31perf/x86/lbr: Enable the branch type for the Arch LBR by defaultKan Liang1-0/+8
commit 32ba156df1b1c8804a4e5be5339616945eafea22 upstream. On the platform with Arch LBR, the HW raw branch type encoding may leak to the perf tool when the SAVE_TYPE option is not set. In the intel_pmu_store_lbr(), the HW raw branch type is stored in lbr_entries[].type. If the SAVE_TYPE option is set, the lbr_entries[].type will be converted into the generic PERF_BR_* type in the intel_pmu_lbr_filter() and exposed to the user tools. But if the SAVE_TYPE option is NOT set by the user, the current perf kernel doesn't clear the field. The HW raw branch type leaks. There are two solutions to fix the issue for the Arch LBR. One is to clear the field if the SAVE_TYPE option is NOT set. The other solution is to unconditionally convert the branch type and expose the generic type to the user tools. The latter is implemented here, because - The branch type is valuable information. I don't see a case where you would not benefit from the branch type. (Stephane Eranian) - Not having the branch type DOES NOT save any space in the branch record (Stephane Eranian) - The Arch LBR HW can retrieve the common branch types from the LBR_INFO. It doesn't require the high overhead SW disassemble. Fixes: 47125db27e47 ("perf/x86/intel/lbr: Support Architectural LBR") Reported-by: Stephane Eranian <eranian@google.com> Signed-off-by: Kan Liang <kan.liang@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20220816125612.2042397-1-kan.liang@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-31parisc: Fix exception handler for fldw and fstw instructionsHelge Deller1-1/+1
commit 7ae1f5508d9a33fd58ed3059bd2d569961e3b8bd upstream. The exception handler is broken for unaligned memory acceses with fldw and fstw instructions, because it trashes or uses randomly some other floating point register than the one specified in the instruction word on loads and stores. The instruction "fldw 0(addr),%fr22L" (and the other fldw/fstw instructions) encode the target register (%fr22) in the rightmost 5 bits of the instruction word. The 7th rightmost bit of the instruction word defines if the left or right half of %fr22 should be used. While processing unaligned address accesses, the FR3() define is used to extract the offset into the local floating-point register set. But the calculation in FR3() was buggy, so that for example instead of %fr22, register %fr12 [((22 * 2) & 0x1f) = 12] was used. This bug has been since forever in the parisc kernel and I wonder why it wasn't detected earlier. Interestingly I noticed this bug just because the libime debian package failed to build on *native* hardware, while it successfully built in qemu. This patch corrects the bitshift and masking calculation in FR3(). Signed-off-by: Helge Deller <deller@gmx.de> Cc: <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-25MIPS: tlbex: Explicitly compare _PAGE_NO_EXEC against 0Nathan Chancellor1-2/+2
[ Upstream commit 74de14fe05dd6b151d73cb0c73c8ec874cbdcde6 ] When CONFIG_XPA is enabled, Clang warns: arch/mips/mm/tlbex.c:629:24: error: converting the result of '<<' to a boolean; did you mean '(1 << _PAGE_NO_EXEC_SHIFT) != 0'? [-Werror,-Wint-in-bool-context] if (cpu_has_rixi && !!_PAGE_NO_EXEC) { ^ arch/mips/include/asm/pgtable-bits.h:174:28: note: expanded from macro '_PAGE_NO_EXEC' # define _PAGE_NO_EXEC (1 << _PAGE_NO_EXEC_SHIFT) ^ arch/mips/mm/tlbex.c:2568:24: error: converting the result of '<<' to a boolean; did you mean '(1 << _PAGE_NO_EXEC_SHIFT) != 0'? [-Werror,-Wint-in-bool-context] if (!cpu_has_rixi || !_PAGE_NO_EXEC) { ^ arch/mips/include/asm/pgtable-bits.h:174:28: note: expanded from macro '_PAGE_NO_EXEC' # define _PAGE_NO_EXEC (1 << _PAGE_NO_EXEC_SHIFT) ^ 2 errors generated. _PAGE_NO_EXEC can be '0' or '1 << _PAGE_NO_EXEC_SHIFT' depending on the build and runtime configuration, which is what the negation operators are trying to convey. To silence the warning, explicitly compare against 0 so the result of the '<<' operator is not implicitly converted to a boolean. According to its documentation, GCC enables -Wint-in-bool-context with -Wall but this warning is not visible when building the same configuration with GCC. It appears GCC only warns when compiling C++, not C, although the documentation makes no note of this: https://godbolt.org/z/x39q3brxf Reported-by: Sudip Mukherjee (Codethink) <sudipm.mukherjee@gmail.com> Signed-off-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-25powerpc/64: Init jump labels before parse_early_param()Zhouyi Zhou1-0/+7
[ Upstream commit ca829e05d3d4f728810cc5e4b468d9ebc7745eb3 ] On 64-bit, calling jump_label_init() in setup_feature_keys() is too late because static keys may be used in subroutines of parse_early_param() which is again subroutine of early_init_devtree(). For example booting with "threadirqs": static_key_enable_cpuslocked(): static key '0xc000000002953260' used before call to jump_label_init() WARNING: CPU: 0 PID: 0 at kernel/jump_label.c:166 static_key_enable_cpuslocked+0xfc/0x120 ... NIP static_key_enable_cpuslocked+0xfc/0x120 LR static_key_enable_cpuslocked+0xf8/0x120 Call Trace: static_key_enable_cpuslocked+0xf8/0x120 (unreliable) static_key_enable+0x30/0x50 setup_forced_irqthreads+0x28/0x40 do_early_param+0xa0/0x108 parse_args+0x290/0x4e0 parse_early_options+0x48/0x5c parse_early_param+0x58/0x84 early_init_devtree+0xd4/0x518 early_setup+0xb4/0x214 So call jump_label_init() just before parse_early_param() in early_init_devtree(). Suggested-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Zhouyi Zhou <zhouzhouyi@gmail.com> [mpe: Add call trace to change log and minor wording edits.] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220726015747.11754-1-zhouzhouyi@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-25powerpc/32: Don't always pass -mcpu=powerpc to the compilerChristophe Leroy2-28/+19
[ Upstream commit 446cda1b21d9a6b3697fe399c6a3a00ff4a285f5 ] Since commit 4bf4f42a2feb ("powerpc/kbuild: Set default generic machine type for 32-bit compile"), when building a 32 bits kernel with a bi-arch version of GCC, or when building a book3s/32 kernel, the option -mcpu=powerpc is passed to GCC at all time, relying on it being eventually overriden by a subsequent -mcpu=xxxx. But when building the same kernel with a 32 bits only version of GCC, that is not done, relying on gcc being built with the expected default CPU. This logic has two problems. First, it is a bit fragile to rely on whether the GCC version is bi-arch or not, because today we can have bi-arch versions of GCC configured with a 32 bits default. Second, there are some versions of GCC which don't support -mcpu=powerpc, for instance for e500 SPE-only versions. So, stop relying on this approximative logic and allow the user to decide whether he/she wants to use the toolchain's default CPU or if he/she wants to set one, and allow only possible CPUs based on the selected target. Reported-by: Pali Rohár <pali@kernel.org> Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Tested-by: Pali Rohár <pali@kernel.org> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Segher Boessenkool <segher@kernel.crashing.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/d4df724691351531bf46d685d654689e5dfa0d74.1657549153.git.christophe.leroy@csgroup.eu Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-25RISC-V: Add fast call path of crash_kexec()Xianting Tian1-0/+4
[ Upstream commit 3f1901110a89b0e2e13adb2ac8d1a7102879ea98 ] Currently, almost all archs (x86, arm64, mips...) support fast call of crash_kexec() when "regs && kexec_should_crash()" is true. But RISC-V not, it can only enter crash system via panic(). However panic() doesn't pass the regs of the real accident scene to crash_kexec(), it caused we can't get accurate backtrace via gdb, $ riscv64-linux-gnu-gdb vmlinux vmcore Reading symbols from vmlinux... [New LWP 95] #0 console_unlock () at kernel/printk/printk.c:2557 2557 if (do_cond_resched) (gdb) bt #0 console_unlock () at kernel/printk/printk.c:2557 #1 0x0000000000000000 in ?? () With the patch we can get the accurate backtrace, $ riscv64-linux-gnu-gdb vmlinux vmcore Reading symbols from vmlinux... [New LWP 95] #0 0xffffffe00063a4e0 in test_thread (data=<optimized out>) at drivers/test_crash.c:81 81 *(int *)p = 0xdead; (gdb) (gdb) bt #0 0xffffffe00064d5c0 in test_thread (data=<optimized out>) at drivers/test_crash.c:81 #1 0x0000000000000000 in ?? () Test code to produce NULL address dereference in test_crash.c, void *p = NULL; *(int *)p = 0xdead; Reviewed-by: Guo Ren <guoren@kernel.org> Tested-by: Xianting Tian <xianting.tian@linux.alibaba.com> Signed-off-by: Xianting Tian <xianting.tian@linux.alibaba.com> Link: https://lore.kernel.org/r/20220606082308.2883458-1-xianting.tian@linux.alibaba.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-28 08:22:32 +0300