summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)AuthorFilesLines
2007-10-09[MIPS] Au1000: set the PCI controller IO baseFlorian Fainelli1-0/+1
The PCI controller IO base was not set in the au1000 pci code. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John Crispin <blogic@openwrt.org> Signed-off-by: Florian Fainelli <florian.fainelli@telecomint.eu> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-09[MIPS] Alchemy: Fix USB initialization.Florian Fainelli4-10/+10
This patch fixes a wrong ifdef in the board setup code, leading to the GPIO pin not being pulled high, and thus the USB switch not being powered at all. This finishes the rename of CONFIG_USB_OHCI to CONFIG_USB_OHCI_HCD, which started in 2005 (before 2.6.12-rc2), then probably because things were working anyway for most people got forgotten. [Ralf: Paolo's original patch didn't fix the module case, Florian's patch only fixed MTX1 etc. so this is a combined patch plus some cleanups.] Cc: Giuseppe Patanè <giuseppe.patane@tvblob.com> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John Crispin <blogic@openwrt.org> Signed-off-by: Florian Fainelli <florian.fainelli@telecomint.eu> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-09[MIPS] IP32: Fix fatal typo in address computation.Giuseppe Sacco1-1/+1
Signed-off-by: Giuseppe Sacco <eppesuig@debian.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-08Longhaul: add auto enabled "revid_errata" optionRafal Bilski1-3/+57
VIA C3 Ezra-T has RevisionID equal to 1, but it needs RevisionKey to be 0 or CPU will ignore new frequency and will continue to work at old frequency. New "revid_errata" option will force RevisionKey to be set to 0, whatever RevisionID is. Additionaly "Longhaul" will not silently ignore unsuccessful transition. It will try to check if "revid_errata" or "disable_acpi_c3" options need to be enabled for this processor/system. Same for Longhaul ver. 2 support. It will be disabled if none of above options will work. Best case scenario (with patch apllied and v2 enabled): longhaul: VIA C3 'Ezra' [C5C] CPU detected. Longhaul v2 supported. longhaul: Using northbridge support. longhaul: VRM 8.5 longhaul: Max VID=1.350 Min VID=1.050, 13 possible voltage scales longhaul: f: 300000 kHz, index: 0, vid: 1050 mV [...] longhaul: Voltage scaling enabled. Worst case scenario: longhaul: VIA C3 'Ezra-T' [C5M] CPU detected. Powersaver supported. longhaul: Using northbridge support. longhaul: Using ACPI support. longhaul: VRM 8.5 longhaul: Claims to support voltage scaling but min & max are both 1.250. Voltage scaling disabled longhaul: Failed to set requested frequency! longhaul: Enabling "Ignore Revision ID" option. longhaul: Failed to set requested frequency! longhaul: Disabling ACPI C3 support. longhaul: Disabling "Ignore Revision ID" option. longhaul: Failed to set requested frequency! longhaul: Enabling "Ignore Revision ID" option. [akpm@linux-foundation.org: coding-style cleanups] Signed-off-by: Rafal Bilski <rafalbilski@interia.pl> Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-07Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linusLinus Torvalds1-12/+9
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: [MIPS] IP32: Enable PCI bridges
2007-10-06Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds1-0/+18
* master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] 4598/2: OSIRIS: Ensure we do not get nRSTOUT during suspend [ARM] 4597/2: OSIRIS: ensure CPLD0 is preserved after suspend
2007-10-06[ARM] 4598/2: OSIRIS: Ensure we do not get nRSTOUT during suspendBen Dooks1-0/+6
Ensure nRSTOUT is not asserted during or on resume. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-10-06[ARM] 4597/2: OSIRIS: ensure CPLD0 is preserved after suspendBen Dooks1-0/+12
Ensure that CPLD is restored to the original state on resume, and that before going into suspend we select the NAND bank we booted from for restarting. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-10-05Merge branch 'master' of ↵Linus Torvalds5-9/+37
master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6 * 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6: [SPARC64]: Fix 'niu' complex IRQ probing. [SPARC64]: check fork_idle() error [SPARC64]: Temporary workaround for PCI-E slot on T1000. [SPARC64]: VIO device addition log message level is too high. [SPARC64]: Fix domain-services port probing. [SPARC64]: Don't use in/local regs for ldx/stx data in N1 memcpy.
2007-10-05[MIPS] IP32: Enable PCI bridgesGiuseppe Sacco1-12/+9
Fixe MACE PCI addressing by adding the bus number parameter. Remove check of the used slot since every slot should be valid. Converted mkaddr from #define to inline function. Signed-off-by: Giuseppe Sacco <eppesuig@debian.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-05[SPARC64]: Fix 'niu' complex IRQ probing.David S. Miller1-1/+2
They should be computed the same as how we compute them under 'virtual-devices'. Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-05[SPARC64]: check fork_idle() errorAkinobu Mita1-0/+2
Check the return value of fork_idle() to catch error. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-04[SPARC64]: Temporary workaround for PCI-E slot on T1000.David S. Miller1-2/+2
The PCI-E slot on T1000 connects directly to the Fire PCI chip with no intervening bridges visible in the OBP tree. Unfortunately the bus numbering of the device in that slot is different (2) from the PCI host controller (0), and thus the pci_bus_{read,write}_config_*() calls don't work out. Complicating things further the Fire PCI controller has no config space it responds to either. For now treat this case specially so that devices in the slot work. Longer term we need to perhaps cons up a dummy bridge between the Fire and the PCI-E slot so that the bus hierarchy is complete inside of the kernel and thus the bus numbering all works out right. Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-04[SPARC64]: VIO device addition log message level is too high.David S. Miller1-1/+1
There is no reason this should be KERN_ERR, KERN_INFO is just fine. Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-04[SPARC64]: Fix domain-services port probing.David S. Miller1-1/+26
We should only use ports underneath "domain-services", other DS ports in the MDESC aren't for us to use. Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-04Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linusLinus Torvalds1-1/+1
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: [MIPS] Terminally fix local_{dec,sub}_if_positive [MIPS] Type proof reimplementation of cmpxchg. [MIPS] pg-r4k.c: Fix a typo in an R4600 v2 erratum workaround
2007-10-03Blackfin arch: fix PORT_J BUG for BF537/6 EMAC driver reported by Kalle ↵Michael Hennerich1-8/+11
Pokki <kalle.pokki@iki.fi> Cc: Kalle Pokki <kalle.pokki@iki.fi> Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-10-03Blackfin arch: gpio pinmux and resource allocation API required by BF537 on ↵Michael Hennerich1-31/+241
chip ethernet mac driver Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-10-03[MIPS] pg-r4k.c: Fix a typo in an R4600 v2 erratum workaroundMaciej W. Rozycki1-1/+1
Restore a load from KSEG1 done as a workaround for an R4600 v2 erratum, dropped with 211be16de99a7424e66c0b6c0d00e2c970508ac2. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-03[SPARC64]: Don't use in/local regs for ldx/stx data in N1 memcpy.David S. Miller1-4/+4
It doesn't matter for use in 64-bit objects, but when used in 32-bit environments the top 32-bits of the local and in registers will get chopped off on the next register window spill/restore which leads to difficult to track down and subtle bugs. Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-02Merge branch 'master' of ↵Linus Torvalds6-169/+229
master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6 * 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6: [SPARC64]: Fix missing load-twin usage in Niagara-1 memcpy. [SPARC64]: Fix put_user() calls in binfmt_aout32.c [SPARC]: Fix EBUS use of uninitialized variable.
2007-10-02Merge branch 'merge' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: [POWERPC] Fix xics set_affinity code
2007-10-02[SPARC64]: Fix missing load-twin usage in Niagara-1 memcpy.David S. Miller3-166/+221
For the case where the source is not aligned modulo 8 we don't use load-twins to suck the data in and this kills performance since normal loads allocate in the L1 cache (unlike load-twin) and thus big memcpys swipe the entire L1 D-cache. We need to allocate a register window to implement this properly, but that actually simplifies a lot of things as a nice side-effect. Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-02Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linusLinus Torvalds1-0/+2
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: [MIPS] vmlinux.lds.S: Handle note sections [MIPS] Fix value of O_TRUNC
2007-10-02x86_64: increase VDSO_TEXT_OFFSET for ancient binutilsAndi Kleen1-1/+1
For some reason old binutils genertate larger headers so increase the text offset of the vdso to avoid linker errors. Roland McGrath explains: "There are extra symbols in the '.dynsym' section that are responsible for the size difference (They also cause corresponding inflation in '.gnu.version') Older ld's wrongly generated these unneeded symbols in .dynsym. This was fixed not all that long ago (2006); binutils-2.17.50.0.6 might be the first fixed version, but I have not verified for sure where the cutoff was. The unneeded symbols et al from old ld add almost 700 bytes excess. This limits fairly tightly the amount by which the actual text and data in the vDSO can grow in the future without pushing the whole file over 4kb. If it does grow later on, we should consider changing the layout with a config option or something to pack it better without that padding, when building the kernel with newer binutils." Signed-off-by: Andi Kleen <ak@suse.de> Cc: Roland McGrath <roland@redhat.com> Cc: Badari Pulavarty <pbadari@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-02[POWERPC] Fix xics set_affinity codeAnton Blanchard1-1/+1
On a POWER6 machine running 2.6.23-rc8 I sometimes see the following error: xics_set_affinity: No online cpus in the mask 00000000,00000000,00000000,00000001 for irq 20 In a desperate attempt to get a changelog entry in 2.6.23, I took a look into it. It turns out we are passing a real and not a virtual irq into get_irq_server. This works for the case where hwirq < NR_IRQS and we set virq = hwirq. In my case however hwirq = 590082 and we try and access irq_desc[590082], slightly past the end at 512 entries. Lucky we ship lots of memory with our machines. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-10-01[MIPS] vmlinux.lds.S: Handle note sectionsMaciej W. Rozycki1-0/+2
Store any note sections after the exception tables like the other architectures do. This is required for .note.gnu.build-id emitted from binutils 2.18 onwards if nothing else. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-01[SPARC64]: Fix put_user() calls in binfmt_aout32.cDavid S. Miller1-2/+2
argv and envp are pointers to u32's in userspace, so don't try to put_user() a NULL to them. Aparently gcc-4.2.x now warns about this, and since we use -Werror for arch/sparc64 code, this breaks the build. Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-30[ARM] Resolve PCI section warningsRussell King1-2/+2
Fix the following (valid) section warnings: WARNING: vmlinux.o(.text+0xf7b5c): Section mismatch: reference to .init.text:pcibios_fixup_bus (between 'pci_scan_child_bus' and 'pci_scan_bridge') WARNING: vmlinux.o(.text+0xfc5f4): Section mismatch: reference to .init.text:pcibios_resource_to_bus (between 'pci_map_rom' and 'pci_unmap_rom') WARNING: vmlinux.o(.text+0xfc824): Section mismatch: reference to .init.text:pcibios_resource_to_bus (between 'pci_update_resource' and 'pci_claim_resource') WARNING: vmlinux.o(.text+0xfd6d8): Section mismatch: reference to .init.text:pcibios_resource_to_bus (between 'pci_setup_cardbus' and 'find_free_bus_resource') WARNING: vmlinux.o(.text+0xfd730): Section mismatch: reference to .init.text:pcibios_resource_to_bus (between 'pci_setup_cardbus' and 'find_free_bus_resource') WARNING: vmlinux.o(.text+0xfd788): Section mismatch: reference to .init.text:pcibios_resource_to_bus (between 'pci_setup_cardbus' and 'find_free_bus_resource') WARNING: vmlinux.o(.text+0xfd7e0): Section mismatch: reference to .init.text:pcibios_resource_to_bus (between 'pci_setup_cardbus' and 'find_free_bus_resource') WARNING: vmlinux.o(.text+0xfe024): Section mismatch: reference to .init.text:pcibios_resource_to_bus (between 'pci_bus_assign_resources' and 'sys_pciconfig_read') WARNING: vmlinux.o(.text+0xfe0f4): Section mismatch: reference to .init.text:pcibios_resource_to_bus (between 'pci_bus_assign_resources' and 'sys_pciconfig_read') WARNING: vmlinux.o(.text+0xfe17c): Section mismatch: reference to .init.text:pcibios_resource_to_bus (between 'pci_bus_assign_resources' and 'sys_pciconfig_read') Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-09-29Merge branch 'for-2.6.23' of ↵Linus Torvalds4-4/+5
master.kernel.org:/pub/scm/linux/kernel/git/galak/powerpc * 'for-2.6.23' of master.kernel.org:/pub/scm/linux/kernel/git/galak/powerpc: [POWERPC] mpc8349emitx.dts: Setup USB-DR for peripheral mode. [POWERPC] Fix mpc834x USB-MPH configuration. [POWERPC] Fix cpm_uart driver for cpm1 machines [PPC] Fix cpm_dpram_addr returning phys mem instead of virt mem [POWERPC] Fix copy'n'paste typo in commproc.c
2007-09-28Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linusLinus Torvalds1-1/+1
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: [MIPS] Fix fallocate on o32 binary compat ABI [MIPS] Fix CONFIG_BUILD_ELF64 kernels with symbols in CKSEG0. [MIPS] IP32: Fix initialization of UART base addresses.
2007-09-28[MIPS] Fix fallocate on o32 binary compat ABIKyle McMartin1-1/+1
MIPS was mistakenly forgetting to use the fallocate compat wrapper, which I noticed while cleaning up all the duplicate fallocate wrappers. Signed-off-by: Kyle McMartin <kyle@mcmartin.ca> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-09-28[MIPS] IP32: Fix initialization of UART base addresses.Ralf Baechle1-2/+2
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-09-28Merge branch 'for-linus' of ↵Linus Torvalds1-3/+6
git://git.kernel.org/pub/scm/linux/kernel/git/hpa/linux-2.6-x86setup * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hpa/linux-2.6-x86setup: [x86 setup] Correct the SMAP check for INT 0x15, AX=0xe820
2007-09-28[x86 setup] Correct the SMAP check for INT 0x15, AX=0xe820H. Peter Anvin1-3/+6
The e820 probe code was checking %edx, not %eax, for the SMAP signature on return. This worked on *almost* all systems, since %edx still contained SMAP from the call on entry, but on a handful of systems it failed -- plus, we would have missed real mismatches. The error output is "=d" to make sure gcc knows %edx is clobbered here. Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2007-09-28[POWERPC] mpc8349emitx.dts: Setup USB-DR for peripheral mode.jacmet@sunsite.dk1-0/+1
Setup dr_mode for USB-DR to peripheral as the default (host mode) doesn't make much sense for the mini-AB connector on the ITX board. Peripheral mode is preferable to OTG as the fsl_usb2_udc.c driver doesn't yet properly support it. Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-09-28[POWERPC] Fix mpc834x USB-MPH configuration.jacmet@sunsite.dk1-2/+2
mpc834x USB-MPH configuration got broken by commit 6f442560021aecf08658e26ed9a37e6928ef0fa1. The selection bits in SICRL should be cleared rather than set to configure the USB MUXes for the MPH. Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-09-28[PPC] Fix cpm_dpram_addr returning phys mem instead of virt memJochen Friedrich1-1/+1
cpm_dpram_addr returns physical memory of the DP RAM instead of iomapped virtual memory. As there usually is a 1:1 MMU map of the IMMR area, this is often not noticed. However, cpm_dpram_phys assumes this iomapped virtual memory and returns garbage on the 1:1 mapped memory causing CPM1 uart console to fail. This patch fixes the problem (copied from the powerpc tree). Signed-off-by: Jochen Friedrich <jochen@scram.de> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-09-28[POWERPC] Fix copy'n'paste typo in commproc.cJochen Friedrich1-1/+1
The powerpc version of commproc.c exports cpm_dpram_addr twice and cpm_dpram_phys not at all due to a typo. This patch fixes this problem. CC arch/powerpc/sysdev/commproc.o arch/powerpc/sysdev/commproc.c:398: error: redefinition of '__kcrctab_cpm_dpram_addr' arch/powerpc/sysdev/commproc.c:392: error: previous definition of '__kcrctab_cpm_dpram_addr' was here arch/powerpc/sysdev/commproc.c:398: error: redefinition of '__kstrtab_cpm_dpram_addr' arch/powerpc/sysdev/commproc.c:392: error: previous definition of '__kstrtab_cpm_dpram_addr' was here arch/powerpc/sysdev/commproc.c:398: error: redefinition of '__ksymtab_cpm_dpram_addr' arch/powerpc/sysdev/commproc.c:392: error: previous definition of '__ksymtab_cpm_dpram_addr' was here make[1]: *** [arch/powerpc/sysdev/commproc.o] Error 1 make: *** [arch/powerpc/sysdev] Error 2 Signed-off-by: Jochen Friedrich <jochen@scram.de> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-09-28[MIPS] IP32: Fix initialization of UART base addresses.Ralf Baechle1-2/+2
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-09-28[SPARC]: Fix EBUS use of uninitialized variable.David S. Miller2-1/+6
If of_get_property() fails, it returns NULL and the 'len' parameter is undefined. So we need to explicitly set len to zero in such cases. Noticed by Al Viro. Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-27Merge branch 'for-linus' of ↵Linus Torvalds1-7/+23
git://git.kernel.org/pub/scm/linux/kernel/git/hpa/linux-2.6-x86setup * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hpa/linux-2.6-x86setup: [x86 setup] Handle case of improperly terminated E820 chain
2007-09-27Revert "x86-64: Disable local APIC timer use on AMD systems with C1E"Linus Torvalds1-34/+0
This reverts commit e66485d747505e9d960b864fc6c37f8b2afafaf0, since Rafael Wysocki noticed that the change only works for his in -mm, not in mainline (and that both "noapictimer" _and_ "apicmaintimer" are broken on his hardware, but that's apparently not a regression, just a symptom of the same issue that causes the automatic apic timer disable to not work). It turns out that it really doesn't work correctly on x86-64, since x86-64 doesn't use the generic clock events for timers yet. Thanks to Rafal for testing, and here's the ugly details on x86-64 as per Thomas: "I just looked into the code and the logic vs. noapictimer on SMP is completely broken. On i386 the noapictimer option not only disables the local APIC timer, it also registers the CPUs for broadcasting via IPI on SMP systems. The x86-64 code uses the broadcast only when the local apic timer is active, i.e. "noapictimer" is not on the command line. This defeats the whole purpose of "noapictimer". It should be there to make boxen work, where the local APIC timer actually has a hardware problem, e.g. the nx6325. The current implementation of x86_64 only fixes the ACPI c-states related problem where the APIC timer stops in C3(2), nothing else. On nx6325 and other AMD X2 equipped systems which have the C1E enabled we run into the following: PIT keeps jiffies (and the system) running, but the local APIC timer interrupts can get out of sync due to this C1E effect. I don't think this is a critical problem, but it is wrong nevertheless. I think it's safe to revert the C1E patch and postpone the fix to the clock events conversion." On further reflection, Thomas noted: "It's even worse than I thought on the first check: "noapictimer" on the command line of an SMP box prevents _ONLY_ the boot CPU apic timer from being used. But the secondary CPU is still unconditionally setting up the APIC timer and uses the non calibrated variable calibration_result, which is of course 0, to setup the APIC timer. Wreckage guaranteed." so we'll just have to wait for the x86 merge to hopefully fix this up for x86-64. Tested-and-requested-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-09-27[x86 setup] Handle case of improperly terminated E820 chainH. Peter Anvin1-7/+23
At least one system (a Geode system with a Digital Logic BIOS) has been found which suddenly stops reporting the SMAP signature when reading the E820 memory chain. We can't know what, exactly, broke in the BIOS, so if we detect this situation, declare the E820 data unusable and fall back to E801. Also, revert to original behavior of always probing all memory methods; that way all the memory information is available to the kernel. Signed-off-by: H. Peter Anvin <hpa@zytor.com> Cc: Jordan Crouse <jordan.crouse@amd.com> Cc: Joerg Pommnitz <pommnitz@yahoo.com>
2007-09-26xen: execve's error paths don't pin the mm before unpinningJeremy Fitzhardinge1-1/+4
execve's error paths don't activate (and therefore pin) the mm before calling exit_mmap to free it up, so don't try to unpin unless it is actually pinned. This prevents a BUG_ON from triggering. Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com> Cc: Christian Ostheimer <osth@freesurf.ch> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-09-26x86-64: Disable local APIC timer use on AMD systems with C1EThomas Gleixner1-0/+34
commit 3556ddfa9284a86a59a9b78fe5894430f6ab4eef titled [PATCH] x86-64: Disable local APIC timer use on AMD systems with C1E solves a problem with AMD dual core laptops e.g. HP nx6325 (Turion 64 X2) with C1E enabled: When both cores go into idle at the same time, then the system switches into C1E state, which is basically the same as C3. This stops the local apic timer. This was debugged right after the dyntick merge on i386 and despite the patch title it fixes only the 32 bit path. x86_64 is still missing this fix. It seems that mainline is not really affected by this issue, as the PIT is running and keeps jiffies incrementing, but that's just waiting for trouble. -mm suffers from this problem due to the x86_64 high resolution timer patches. This is a quick and dirty port of the i386 code to x86_64. I spent quite a time with Rafael to debug the -mm / hrt wreckage until someone pointed us to this. I really had forgotten that we debugged this half a year ago already. Sigh, is it just me or is there something yelling arch/x86 into my ear? Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-09-26[POWERPC] spufs: fix mismerge, making context signal{1,2} files readable againJeremy Kerr1-2/+2
The commit 8b6f50ef1d5cc86b278eb42bc91630fad455fb10 seems to have been affected by a mismerge of a duplicate patch (d054b36ffd302ec65aabec16a0c60ddd9e6b5a62) - both the spufs_dir_contents and spufs_dir_nosched_contents have been given write-only signal notification files. This change reverts the spufs_dir_contents array to use the readable signal notification file implementation. Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Acked-by: Arnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-25[POWERPC] Ensure FULL_REGS on execRoland McGrath1-0/+7
When PTRACE_O_TRACEEXEC is used, a ptrace call to fetch the registers at the PTRACE_EVENT_EXEC stop (PTRACE_PEEKUSR) will oops in CHECK_FULL_REGS. With recent versions, "gdb --args /bin/sh -c 'exec /bin/true'" and "run" at the (gdb) prompt is sufficient to produce this. I also have written an isolated test case, see https://bugzilla.redhat.com/show_bug.cgi?id=301791#c15. This change fixes the problem by clearing the low bit of pt_regs.trap in start_thread so that FULL_REGS is true again. This is correct since all of the GPRs that "full" refers to are cleared in start_thread. Signed-off-by: Roland McGrath <roland@redhat.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-24[MIPS] SMTC: Make ack_bad_irq() safe with no IM backstop.Ralf Baechle4-22/+8
Issue reported and original patch by Kevin Kissel, cleaner (imho) implementation by me. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-09-22Blackfin arch: add some missing syscallBryan Wu1-4/+19
When compiling the Blackfin kernel, checksyscalls.pl will report lots of missing syscalls warnings. This patch will add some missing syscalls which make sense on Blackfin arch After appling this patch, toolchain should be rebuilt. Then recompiling the kernel with the new toolchain. Signed-off-by: Bryan Wu <bryan.wu@analog.com>