summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)AuthorFilesLines
2010-02-24x86, mrst: Fill in PCI functions in x86_init layerJacob Pan2-0/+18
This patch added Moorestown platform specific PCI init functions. Signed-off-by: Jacob Pan <jacob.jun.pan@intel.com> LKML-Reference: <43F901BD926A4E43B106BF17856F07559FB80D0A@orsmsx508.amr.corp.intel.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-24x86, mrst: Add dummy legacy pic to platform setupJacob Pan1-0/+5
Moorestown has no legacy PIC; point it to the null legacy PIC. Signed-off-by: Jacob Pan <jacob.jun.pan@intel.com> LKML-Reference: <43F901BD926A4E43B106BF17856F07559FB80D09@orsmsx508.amr.corp.intel.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-24x86/PCI: Moorestown PCI supportJesse Barnes2-1/+259
The Moorestown platform only has a few devices that actually support PCI config cycles. The rest of the devices use an in-RAM MCFG space for the purposes of device enumeration and initialization. There are a few uglies in the fake support, like BAR sizes that aren't a power of two, sizing detection, and writes to the real devices, but other than that it's pretty straightforward. Another way to think of this is not really as PCI at all, but just a table in RAM describing which devices are present, their capabilities and their offsets in MMIO space. This could have been done with a special new firmware table on this platform, but given that we do have some real PCI devices too, simply describing things in an MCFG type space was pretty simple. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> LKML-Reference: <43F901BD926A4E43B106BF17856F07559FB80D08@orsmsx508.amr.corp.intel.com> Signed-off-by: Jacob Pan <jacob.jun.pan@intel.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-24x86, ioapic: Add dummy ioapic functionsJacob Pan1-0/+4
Some ioapic extern functions are used when CONFIG_X86_IO_APIC is not defined. We need the dummy functions to avoid a compile time error. Signed-off-by: Jacob Pan <jacob.jun.pan@intel.com> LKML-Reference: <43F901BD926A4E43B106BF17856F0755A318DA07@orsmsx508.amr.corp.intel.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-24x86, ioapic: Early enable ioapic for timer irqJacob Pan2-0/+22
Moorestown platform needs apic ready early for the system timer irq which is delievered via ioapic. Should not impact other platforms. In the longer term, once ioapic setup is moved before late time init, we will not need this patch to do early apic enabling. Signed-off-by: Jacob Pan <jacob.jun.pan@intel.com> LKML-Reference: <43F901BD926A4E43B106BF17856F07559FB80D07@orsmsx508.amr.corp.intel.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-24x86, pic: Fix section mismatch in legacy picJacob Pan1-3/+3
Move legacy_pic chip dummy functions out of init section as they might be referenced at run time. Signed-off-by: Jacob Pan <jacob.jun.pan@intel.com> LKML-Reference: <43F901BD926A4E43B106BF17856F0755A318D3AA@orsmsx508.amr.corp.intel.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-23Merge remote branch 'origin/x86/apic' into x86/mrstH. Peter Anvin17-179/+228
Conflicts: arch/x86/kernel/apic/io_apic.c
2010-02-23Merge branch 'x86/irq' into x86/apicH. Peter Anvin540-7170/+14762
Merge reason: Conflicts in arch/x86/kernel/apic/io_apic.c Resolved Conflicts: arch/x86/kernel/apic/io_apic.c Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-21Merge branch 'x86/urgent' into x86/irqH. Peter Anvin12-42/+99
Merge reason: conflict in arch/x86/kernel/apic/io_apic.c Resolved Conflicts: arch/x86/kernel/apic/io_apic.c Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-20x86, apic: Remove ioapic_disable_legacy()Jacob Pan2-7/+5
The ioapic_disable_legacy() call is no longer needed for platforms do not have legacy pic. the legacy pic abstraction has taken care it automatically. This patch also initialize irq-related static variables based on information obtained from legacy_pic. Signed-off-by: Jacob Pan <jacob.jun.pan@intel.com> LKML-Reference: <43F901BD926A4E43B106BF17856F0755A30A7660@orsmsx508.amr.corp.intel.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-20x86, pic: Make use of legacy_pic abstractionJacob Pan9-65/+59
This patch replaces legacy PIC-related global variable and functions with the new legacy_pic abstraction. Signed-off-by: Jacob Pan <jacob.jun.pan@intel.com> LKML-Reference: <43F901BD926A4E43B106BF17856F07559FB80D04@orsmsx508.amr.corp.intel.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-20x86, pic: Introduce legacy_pic abstractionJacob Pan2-0/+56
This patch makes i8259A like legacy programmable interrupt controller code into a driver so that legacy pic functions can be selected at runtime based on platform information, such as HW subarchitecure ID. Default structure of legacy_pic maintains the current code path for x86pc. Signed-off-by: Jacob Pan <jacob.jun.pan@intel.com> LKML-Reference: <43F901BD926A4E43B106BF17856F07559FB80D03@orsmsx508.amr.corp.intel.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-20x86: Initialize stack canary in secondary startJacob Pan1-0/+4
Some secondary clockevent setup code needs to call request_irq, which will cause fake stack check failure in schedule() if voluntary preemption model is chosen. It is safe to have stack canary initialized here early, since start_secondary() does not return. Signed-off-by: Jacob Pan <jacob.jun.pan@intel.com> LKML-Reference: <43F901BD926A4E43B106BF17856F07559FB80D02@orsmsx508.amr.corp.intel.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-20x86, ioapic: Improve handling of i8259A irq initAlek Du1-19/+4
Since we already track the number of legacy vectors by nr_legacy_irqs, we can avoid use static vector allocations -- we can use dynamic one. Signed-off-by: Alek Du <alek.du@intel.com> LKML-Reference: <43F901BD926A4E43B106BF17856F07559FB80D01@orsmsx508.amr.corp.intel.com> Signed-off-by: Jacob Pan <jacob.jun.pan@intel.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-20x86: Add pcibios_fixup_irqs to x86_initThomas Gleixner4-2/+9
Platforms like Moorestown want to override the pcibios_fixup_irqs default function. Add it to x86_init.pci. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> LKML-Reference: <43F901BD926A4E43B106BF17856F07559FB80D00@orsmsx508.amr.corp.intel.com> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Jacob Pan <jacob.jun.pan@intel.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-20x86: Add pci_init_irq to x86_initThomas Gleixner7-10/+13
Moorestown wants to reuse pcibios_init_irq but needs to provide its own implementation of pci_enable_irq. After we distangled the init we can move the init_irq call to x86_init and remove the pci_enable_irq != NULL check in pcibios_init_irq. pci_enable_irq is compile time initialized to pirq_enable_irq and the special cases which override it (visws and acpi) set the x86_init function pointer to noop. That allows MSRT to override pci_enable_irq and otherwise run pcibios_init_irq unmodified. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> LKML-Reference: <43F901BD926A4E43B106BF17856F07559FB80CFF@orsmsx508.amr.corp.intel.com> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Jacob Pan <jacob.jun.pan@intel.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-20x86: Move pci init function to x86_initThomas Gleixner15-46/+53
The PCI initialization in pci_subsys_init() is a mess. pci_numaq_init, pci_acpi_init, pci_visws_init and pci_legacy_init are called and each implementation checks and eventually modifies the global variable pcibios_scanned. x86_init functions allow us to do this more elegant. The pci.init function pointer is preset to pci_legacy_init. numaq, acpi and visws can modify the pointer in their early setup functions. The functions return 0 when they did the full initialization including bus scan. A non zero return value indicates that pci_legacy_init needs to be called either because the selected function failed or wants the generic bus scan in pci_legacy_init to happen (e.g. visws). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> LKML-Reference: <43F901BD926A4E43B106BF17856F07559FB80CFE@orsmsx508.amr.corp.intel.com> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Jacob Pan <jacob.jun.pan@intel.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-19x86, irq: Keep chip_data in create_irq_nr and destroy_irqBrandon Philips1-15/+5
Version 4: use get_irq_chip_data() in destroy_irq() to get rid of some local vars. When two drivers are setting up MSI-X at the same time via pci_enable_msix() there is a race. See this dmesg excerpt: [ 85.170610] ixgbe 0000:02:00.1: irq 97 for MSI/MSI-X [ 85.170611] alloc irq_desc for 99 on node -1 [ 85.170613] igb 0000:08:00.1: irq 98 for MSI/MSI-X [ 85.170614] alloc kstat_irqs on node -1 [ 85.170616] alloc irq_2_iommu on node -1 [ 85.170617] alloc irq_desc for 100 on node -1 [ 85.170619] alloc kstat_irqs on node -1 [ 85.170621] alloc irq_2_iommu on node -1 [ 85.170625] ixgbe 0000:02:00.1: irq 99 for MSI/MSI-X [ 85.170626] alloc irq_desc for 101 on node -1 [ 85.170628] igb 0000:08:00.1: irq 100 for MSI/MSI-X [ 85.170630] alloc kstat_irqs on node -1 [ 85.170631] alloc irq_2_iommu on node -1 [ 85.170635] alloc irq_desc for 102 on node -1 [ 85.170636] alloc kstat_irqs on node -1 [ 85.170639] alloc irq_2_iommu on node -1 [ 85.170646] BUG: unable to handle kernel NULL pointer dereference at 0000000000000088 As you can see igb and ixgbe are both alternating on create_irq_nr() via pci_enable_msix() in their probe function. ixgbe: While looping through irq_desc_ptrs[] via create_irq_nr() ixgbe choses irq_desc_ptrs[102] and exits the loop, drops vector_lock and calls dynamic_irq_init. Then it sets irq_desc_ptrs[102]->chip_data = NULL via dynamic_irq_init(). igb: Grabs the vector_lock now and starts looping over irq_desc_ptrs[] via create_irq_nr(). It gets to irq_desc_ptrs[102] and does this: cfg_new = irq_desc_ptrs[102]->chip_data; if (cfg_new->vector != 0) continue; This hits the NULL deref. Another possible race exists via pci_disable_msix() in a driver or in the number of error paths that call free_msi_irqs(): destroy_irq() dynamic_irq_cleanup() which sets desc->chip_data = NULL ...race window... desc->chip_data = cfg; Remove the save and restore code for cfg in create_irq_nr() and destroy_irq() and take the desc->lock when checking the irq_cfg. Reported-and-analyzed-by: Brandon Philips <bphilips@suse.de> Signed-off-by: Yinghai Lu <yinghai@kernel.org> LKML-Reference: <20100207210250.GB8256@jenkins.home.ifup.org> Signed-off-by: Brandon Phiilps <bphilips@suse.de> Cc: stable@kernel.org Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-19xen: Remove unnecessary arch specific xen irq functions.Eric W. Biederman1-4/+0
Right now xen's use of the x86 and ia64 handle_irq is just bizarre and very fragile as it is very non-obvious the function exists and is is used by code out in drivers/.... Luckily using handle_irq is completely unnecessary, and we can just use the generic irq apis instead. This still leaves drivers/xen/events.c as a problematic user of the generic irq apis it has "static struct irq_info irq_info[NR_IRQS]" but that can be fixed some other time. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> LKML-Reference: <4B7CAAD2.10803@kernel.org> Acked-by: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Ian Campbell <Ian.Campbell@citrix.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-18smp: Use nr_cpus= to set nr_cpu_ids earlyYinghai Lu2-5/+6
On x86, before prefill_possible_map(), nr_cpu_ids will be NR_CPUS aka CONFIG_NR_CPUS. Add nr_cpus= to set nr_cpu_ids. so we can simulate cpus <=8 are installed on normal config. -v2: accordging to Christoph, acpi_numa_init should use nr_cpu_ids in stead of NR_CPUS. -v3: add doc in kernel-parameters.txt according to Andrew. Signed-off-by: Yinghai Lu <yinghai@kernel.org> LKML-Reference: <1265793639-15071-34-git-send-email-yinghai@kernel.org> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: H. Peter Anvin <hpa@zytor.com> Cc: Tony Luck <tony.luck@intel.com>
2010-02-18x86, irq: Remove arch_probe_nr_irqsYinghai Lu1-22/+0
So keep nr_irqs == NR_IRQS. With radix trees is matters less. Signed-off-by: Yinghai Lu <yinghai@kernel.org> LKML-Reference: <1265793639-15071-33-git-send-email-yinghai@kernel.org> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-17x86: Add iMac9,1 to pci_reboot_dmi_tableJustin P. Mattock1-0/+8
On the iMac9,1 /sbin/reboot results in a black mangled screen. Adding this DMI entry gets the machine to reboot cleanly as it should. Signed-off-by: Justin P. Mattock <justinmattock@gmail.com> LKML-Reference: <1266362249-3337-1-git-send-email-justinmattock@gmail.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com> Cc: <stable@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-16x86: Convert i8259_lock to raw_spinlockThomas Gleixner5-23/+23
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2010-02-16x86: Convert nmi_lock to raw_spinlockThomas Gleixner1-3/+3
nmi_lock must be a spinning spinlock in -rt. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2010-02-16x86: Convert ioapic_lock and vector_lock to raw_spinlockThomas Gleixner1-53/+53
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2010-02-12parisc: fix tracing of signalsKyle McMartin1-1/+3
Mike Frysinger pointed out that calling tracehook_signal_handler with stepping=0 missed testing the thread flags, resulting in not calling ptrace_notify. Fix this by testing if we're single stepping or branch stepping and setting the flag accordingly. Tested, seems to work. Reported-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Kyle McMartin <kyle@mcmartin.ca> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-02-12Merge branch 'omap-fixes-for-linus' of ↵Linus Torvalds1-1/+6
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 * 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: OMAP: hsmmc: fix memory leak
2010-02-12Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linusLinus Torvalds6-194/+736
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: MIPS: Don't probe reserved EntryHi bits. MIPS: SNI: Correct NULL test MIPS: Fix __devinit __cpuinit confusion in cpu_cache_init MIPS: IP27: Make defconfig useful again. MIPS: Fixup of the r4k timer
2010-02-12Merge branch 'x86-fixes-for-linus' of ↵Linus Torvalds8-37/+31
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, apic: Don't use logical-flat mode when CPU hotplug may exceed 8 CPUs x86-32: Make AT_VECTOR_SIZE_ARCH=2 x86/agp: Fix amd64-agp module initialization regression x86, doc: Fix minor spelling error in arch/x86/mm/gup.c
2010-02-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6Linus Torvalds5-14/+20
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6: sparc32: Fix thinko in previous change. sparc: Align clone and signal stacks to 16 bytes.
2010-02-11sparc32: Fix thinko in previous change.David S. Miller1-1/+1
Should mask stack with 0xf not "0x15". Noticed by Blue Swirl <blauwirbel@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-11x86: Avoid race condition in pci_enable_msix()Brandon Phiilps1-13/+5
Keep chip_data in create_irq_nr and destroy_irq. When two drivers are setting up MSI-X at the same time via pci_enable_msix() there is a race. See this dmesg excerpt: [ 85.170610] ixgbe 0000:02:00.1: irq 97 for MSI/MSI-X [ 85.170611] alloc irq_desc for 99 on node -1 [ 85.170613] igb 0000:08:00.1: irq 98 for MSI/MSI-X [ 85.170614] alloc kstat_irqs on node -1 [ 85.170616] alloc irq_2_iommu on node -1 [ 85.170617] alloc irq_desc for 100 on node -1 [ 85.170619] alloc kstat_irqs on node -1 [ 85.170621] alloc irq_2_iommu on node -1 [ 85.170625] ixgbe 0000:02:00.1: irq 99 for MSI/MSI-X [ 85.170626] alloc irq_desc for 101 on node -1 [ 85.170628] igb 0000:08:00.1: irq 100 for MSI/MSI-X [ 85.170630] alloc kstat_irqs on node -1 [ 85.170631] alloc irq_2_iommu on node -1 [ 85.170635] alloc irq_desc for 102 on node -1 [ 85.170636] alloc kstat_irqs on node -1 [ 85.170639] alloc irq_2_iommu on node -1 [ 85.170646] BUG: unable to handle kernel NULL pointer dereference at 0000000000000088 As you can see igb and ixgbe are both alternating on create_irq_nr() via pci_enable_msix() in their probe function. ixgbe: While looping through irq_desc_ptrs[] via create_irq_nr() ixgbe choses irq_desc_ptrs[102] and exits the loop, drops vector_lock and calls dynamic_irq_init. Then it sets irq_desc_ptrs[102]->chip_data = NULL via dynamic_irq_init(). igb: Grabs the vector_lock now and starts looping over irq_desc_ptrs[] via create_irq_nr(). It gets to irq_desc_ptrs[102] and does this: cfg_new = irq_desc_ptrs[102]->chip_data; if (cfg_new->vector != 0) continue; This hits the NULL deref. Another possible race exists via pci_disable_msix() in a driver or in the number of error paths that call free_msi_irqs(): destroy_irq() dynamic_irq_cleanup() which sets desc->chip_data = NULL ...race window... desc->chip_data = cfg; Remove the save and restore code for cfg in create_irq_nr() and destroy_irq() and take the desc->lock when checking the irq_cfg. Reported-and-analyzed-by: Brandon Philips <bphilips@suse.de> Signed-off-by: Yinghai Lu <yinghai@kernel.org> LKML-Reference: <1265793639-15071-3-git-send-email-yinghai@kernel.org> Signed-off-by: Brandon Phililps <bphilips@suse.de> Cc: stable@kernel.org Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-11x86: Fix SCI on IOAPIC != 0Yinghai Lu3-1/+59
Thomas Renninger <trenn@suse.de> reported on IBM x3330 booting a latest kernel on this machine results in: PCI: PCI BIOS revision 2.10 entry at 0xfd61c, last bus=1 PCI: Using configuration type 1 for base access bio: create slab <bio-0> at 0 ACPI: SCI (IRQ30) allocation failed ACPI Exception: AE_NOT_ACQUIRED, Unable to install System Control Interrupt handler (20090903/evevent-161) ACPI: Unable to start the ACPI Interpreter Later all kind of devices fail... and bisect it down to this commit: commit b9c61b70075c87a8612624736faf4a2de5b1ed30 x86/pci: update pirq_enable_irq() to setup io apic routing it turns out we need to set irq routing for the sci on ioapic1 early. -v2: make it work without sparseirq too. -v3: fix checkpatch.pl warning, and cc to stable Reported-by: Thomas Renninger <trenn@suse.de> Bisected-by: Thomas Renninger <trenn@suse.de> Tested-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Yinghai Lu <yinghai@kernel.org> LKML-Reference: <1265793639-15071-2-git-send-email-yinghai@kernel.org> Cc: stable@kernel.org Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-11MIPS: Don't probe reserved EntryHi bits.David Daney1-2/+2
The patch that adds cpu_probe_vmbits is erroneously writing to reserved bit 12. Since we are really only probing high bits, don't write this bit with a one. Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Cc: Guenter Roeck <guenter.roeck@ericsson.com> Patchwork: http://patchwork.linux-mips.org/patch/949/ Acked-by: Guenter Roeck <guenter.roeck@ericsson.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-11MIPS: SNI: Correct NULL testJulia Lawall1-1/+1
Test the value that was just allocated rather than the previously tested one. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r@ expression *x; expression e; identifier l; @@ if (x == NULL || ...) { ... when forall return ...; } ... when != goto l; when != x = e when != &x *x == NULL // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> To: linux-mips@linux-mips.org To: linux-kernel@vger.kernel.org To: kernel-janitors@vger.kernel.org Patchwork: http://patchwork.linux-mips.org/patch/945/ Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-11MIPS: Fix __devinit __cpuinit confusion in cpu_cache_initDavid Daney2-3/+3
cpu_cache_init and the things it calls should all be __cpuinit instead of __devinit. Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/938/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-11MIPS: IP27: Make defconfig useful again.Ralf Baechle1-188/+729
RTC support was rewritten but the defconfig files were not updated. Enable IPv6 support which for some folks already is a must have. Assign useful values to other new options. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-11MIPS: Fixup of the r4k timerWu Zhangjin1-0/+1
As reported by Maxime Bizon, the commit "MIPS: PowerTV: Fix support for timer interrupts with > 64 external IRQs" have broken the r4k timer since it didn't initialize the cp0_compare_irq_shift variable used in c0_compare_int_pending() on the architectures whose cpu_has_mips_r2 is false. This patch fixes it via initializing the cp0_compare_irq_shift as the cp0_compare_irq used in the old c0_compare_int_pending(). Reported-by: Maxime Bizon <mbizon@freebox.fr> Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com> Cc: David VomLehn <dvomlehn@cisco.com> Cc: mbizon@freebox.fr Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/922/ Tested-by: Shane McDonald <mcdonald.shane@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-10x86, ia32_aout: do not kill argument mappingJiri Slaby1-1/+0
Do not set current->mm->mmap to NULL in 32-bit emulation on 64-bit load_aout_binary after flush_old_exec as it would destroy already set brpm mapping with arguments. Introduced by b6a2fea39318e43fee84fa7b0b90d68bed92d2ba mm: variable length argument support where the argument mapping in bprm was added. [ hpa: this is a regression from 2.6.22... time to kill a.out? ] Signed-off-by: Jiri Slaby <jslaby@suse.cz> LKML-Reference: <1265831716-7668-1-git-send-email-jslaby@suse.cz> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ollie Wild <aaw@google.com> Cc: x86@kernel.org Cc: <stable@kernel.org> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-10OMAP: hsmmc: fix memory leakAaro Koskinen1-1/+6
The platform data allocated with kmalloc() will become unreachable once the init is complete, so it should be freed. The problem was discovered by kmemleak. Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com> Acked-by: Adrian Hunter <adrian.hunter@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-10Merge branch 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6Linus Torvalds1-2/+2
* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6: [S390] Fix struct _lowcore layout. [S390] qdio: prevent call trace if CHPID is offline [S390] qdio: continue polling for buffer state ERROR
2010-02-10Merge branch 'kvm-updates/2.6.33' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds2-4/+6
* 'kvm-updates/2.6.33' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: PIT: control word is write-only kvmclock: count total_sleep_time when updating guest clock Export the symbol of getboottime and mmonotonic_to_bootbased
2010-02-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/hskinnemoen/avr32-2.6Linus Torvalds1-6/+9
* git://git.kernel.org/pub/scm/linux/kernel/git/hskinnemoen/avr32-2.6: avr32: clean up memory allocation in at32_add_device_mci arch/avr32: Fix build failure for avr32 caused by typo
2010-02-10x86, apic: Don't use logical-flat mode when CPU hotplug may exceed 8 CPUsSuresh Siddha6-34/+28
We need to fall back from logical-flat APIC mode to physical-flat mode when we have more than 8 CPUs. However, in the presence of CPU hotplug(with bios listing not enabled but possible cpus as disabled cpus in MADT), we have to consider the number of possible CPUs rather than the number of current CPUs; otherwise we may cross the 8-CPU boundary when CPUs are added later. 32bit apic code can use more cleanups (like the removal of vendor checks in 32bit default_setup_apic_routing()) and more unifications with 64bit code. Yinghai has some patches in works already. This patch addresses the boot issue that is reported in the virtualization guest context. [ hpa: incorporated function annotation feedback from Yinghai Lu ] Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> LKML-Reference: <1265767304.2833.19.camel@sbs-t61.sc.intel.com> Acked-by: Shaohui Zheng <shaohui.zheng@intel.com> Reviewed-by: Yinghai Lu <yinghai@kernel.org> Cc: <stable@kernel.org> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-10powerpc: Fix address masking bug in hpte_need_flush()David Gibson1-3/+9
Commit f71dc176aa06359681c30ba6877ffccab6fba3a6 'Make hpte_need_flush() correctly mask for multiple page sizes' introduced bug, which is triggered when a kernel with a 64k base page size is run on a system whose hardware does not 64k hash PTEs. In this case, we emulate 64k pages with multiple 4k hash PTEs, however in hpte_need_flush() we incorrectly only mask the hardware page size from the address, instead of the logical page size. This causes things to go wrong when we later attempt to iterate through the hardware subpages of the logical page. This patch corrects the error. It has been tested on pSeries bare metal by Michael Neuling. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-02-10sparc: Align clone and signal stacks to 16 bytes.David S. Miller5-14/+20
This is mandatory for 64-bit processes, and doing it also for 32-bit processes saves a conditional in the compat case. This fixes the glibc/nptl/tst-stdio1 test case, as well as many others, on 64-bit. Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-10x86-32: Make AT_VECTOR_SIZE_ARCH=2Serge E. Hallyn1-2/+2
Both x86-32 and x86-64 with 32-bit compat use ARCH_DLINFO_IA32, which defines two saved_auxv entries. But system.h only defines AT_VECTOR_SIZE_ARCH as 2 for CONFIG_IA32_EMULATION, not for CONFIG_X86_32. Fix that. Signed-off-by: Serge E. Hallyn <serue@us.ibm.com> LKML-Reference: <20100209023502.GA15408@us.ibm.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-09KVM: PIT: control word is write-onlyMarcelo Tosatti1-0/+3
PIT control word (address 0x43) is write-only, reads are undefined. Cc: stable@kernel.org Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-02-09kvmclock: count total_sleep_time when updating guest clockJason Wang1-4/+3
Current kvm wallclock does not consider the total_sleep_time which could cause wrong wallclock in guest after host suspend/resume. This patch solve this issue by counting total_sleep_time to get the correct host boot time. Cc: stable@kernel.org Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Glauber Costa <glommer@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-02-09[S390] Fix struct _lowcore layout.Heiko Carstens1-2/+2
Offsets and sizes are wrong for 32 bit. Got broken with 866ba284 "[S390] cleanup lowcore.h". Reported-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-29 07:44:12 +0300