summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)AuthorFilesLines
2015-10-17powerpc/fsl: Move Freescale device tree files into fsl folderHongtao Jia105-143/+146
It makes no sense that some Freescale device tree files are in fsl directory while some others not. This patch move Freescale device tree files into fsl folder. To do that the following two steps are made: - Move Freescale device tree files into fsl folder. - Update the include path in these files from "fsl/*.dtsi" to "*.dtsi". Please add "fsl/" prefix when you make dtb using Makefile. Signed-off-by: Jia Hongtao <hongtao.jia@freescale.com> [scottwood: fixed cuImage rule] Signed-off-by: Scott Wood <scottwood@freescale.com>
2015-10-17powerpc/b4860: Removed LIODN register from sRIO nodepoonam aggrwal1-2/+0
In case of B4860 LIODN register for sRIO is not in GUTs block but in the sRIO register space. Signed-off-by: Varun Sethi <Varun.Sethi@freescale.com> Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
2015-10-17powerpc/85xx: Add support for Varisys Cyrus boardAndy Fleming2-0/+156
This board uses a P5020 chip, and boots just fine using the corenet_generic code. The device tree is very similar to the P5020DS, except that there is no Flash memory. The environment is, instead, stored on an MMC card on the motherboard. Signed-off-by: Andy Fleming <afleming@gmail.com> [scottwood: fixed trailing whitespace] Signed-off-by: Scott Wood <scottwood@freescale.com>
2015-10-17powerpc/fsl_pci: Check for get_user/probe_kernel_address failureScott Wood1-1/+1
Signed-off-by: Scott Wood <scottwood@freescale.com> Reported-by: Andrew Morton <akpm@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Hongtao Jia <hongtao.jia@freescale.com>
2015-10-17powerpc/t104xd4rdb: add DS26522 nodes to device treeZhao Qiang1-0/+10
DS26522 is used for tdm, configured by SPI bus. Add nodes under spi node to t104xd4rdb.dtsi. Signed-off-by: Zhao Qiang <qiang.zhao@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
2015-10-17powerpc/dts: don't fall back to fsl,pq3-gpio for fsl,mpc8572-gpioUwe Kleine-König2-2/+2
While the handling of fsl,pq3-gpio and fsl,mpc8572-gpio is done in the same driver and the two hardly differ, the latter controller needs a workaround for an erratum in the gpio_get callback. To make this difference more explicit remove fsl,pq3-gpio from the list of compatibles for mpc8572 machines. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Scott Wood <scottwood@freescale.com>
2015-10-17powerpc/dts: Add and fix 1588 timer node for eTSECYangbo Lu8-6/+90
Add 1588 timer node in files: arch/powerpc/boot/dts/bsc9131rdb.dtsi arch/powerpc/boot/dts/bsc9132qds.dtsi arch/powerpc/boot/dts/p1010rdb.dtsi arch/powerpc/boot/dts/p1020rdb-pd.dts arch/powerpc/boot/dts/p1021rdb-pc.dtsi arch/powerpc/boot/dts/p1022ds.dtsi arch/powerpc/boot/dts/p1025twr.dtsi For P2020RDB-PC, registers' values should be calculated based on default 1588 reference clock(300MHz) not 250MHz, and fix this in file: arch/powerpc/boot/dts/p2020rdb-pc.dtsi Signed-off-by: Yangbo Lu <yangbo.lu@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
2015-10-17powerpc/corenet: use the mixed mode of MPIC when enabling CPU hotplugchenhui zhao1-0/+8
Core reset may cause issue if using the proxy mode of MPIC. Use the mixed mode of MPIC if enabling CPU hotplug. Signed-off-by: Chenhui Zhao <chenhui.zhao@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
2015-10-15powerpc/xmon: Add some more elements to the existing PACA dump listMichael Ellerman1-4/+57
This patch adds a set of new elements to the existing PACA dump list inside an xmon session which can be listed below improving the overall xmon debug support. With this patch, a typical xmon PACA dump looks something like this. paca for cpu 0x0 @ c00000000fdc0000: possible = yes present = yes online = yes lock_token = 0x8000 (0xa) paca_index = 0x0 (0x8) kernel_toc = 0xc000000001393200 (0x10) kernelbase = 0xc000000000000000 (0x18) kernel_msr = 0xb000000000001033 (0x20) emergency_sp = 0xc00000003fff0000 (0x28) mc_emergency_sp = 0xc00000003ffec000 (0x2e0) in_mce = 0x0 (0x2e8) hmi_event_available = 0x0 (0x2ea) data_offset = 0x1fe7b0000 (0x30) hw_cpu_id = 0x0 (0x38) cpu_start = 0x1 (0x3a) kexec_state = 0x0 (0x3b) slb_shadow[0]: = 0xc000000008000000 0x40016e7779000510 slb_shadow[1]: = 0xd000000008000001 0x400142add1000510 vmalloc_sllp = 0x510 (0x1b8) slb_cache_ptr = 0x4 (0x1ba) slb_cache[0]: = 0x000000000003f000 slb_cache[1]: = 0x0000000000000001 slb_cache[2]: = 0x0000000000000003 slb_cache[3]: = 0x0000000000001000 slb_cache[4]: = 0x0000000000001000 slb_cache[5]: = 0x0000000000000000 slb_cache[6]: = 0x0000000000000000 slb_cache[7]: = 0x0000000000000000 dscr_default = 0x0 (0x58) __current = 0xc000000001331e80 (0x290) kstack = 0xc000000001393e30 (0x298) stab_rr = 0x11 (0x2a0) saved_r1 = 0xc0000001fffef5e0 (0x2a8) trap_save = 0x0 (0x2b8) soft_enabled = 0x0 (0x2ba) irq_happened = 0x1 (0x2bb) io_sync = 0x0 (0x2bc) irq_work_pending = 0x0 (0x2bd) nap_state_lost = 0x0 (0x2be) sprg_vdso = 0x0 (0x2c0) tm_scratch = 0x8000000100009033 (0x2c8) core_idle_state_ptr = (null) (0x2d0) thread_idle_state = 0x0 (0x2d8) thread_mask = 0x0 (0x2d9) subcore_sibling_mask = 0x0 (0x2da) user_time = 0x0 (0x2f0) system_time = 0x0 (0x2f8) user_time_scaled = 0x0 (0x300) starttime = 0x3f462418b5cf4 (0x308) starttime_user = 0x3f4622a57092a (0x310) startspurr = 0xd62a5718 (0x318) utime_sspurr = 0x0 (0x320) stolen_time = 0x0 (0x328) Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com> [mpe: Endian swap slb_shadow before display, minor formatting] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-10-15powerpc/xmon: Paginate kernel log buffer displaySam bobroff1-3/+3
The kernel log buffer is often much longer than the size of a terminal so paginate it's output. Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-10-15powerpc/xmon: Paged output for paca displaySam bobroff3-2/+83
The paca display is already more than 24 lines, which can be problematic if you have an old school 80x24 terminal, or more likely you are on a virtual terminal which does not scroll for whatever reason. This patch adds a new command "#", which takes a single (hex) numeric argument: lines per page. It will cause the output of "dp" and "dpa" to be broken into pages, if necessary. Sample output: 0:mon> # 10 0:mon> dp1 paca for cpu 0x1 @ c00000000fdc0480: possible = yes present = yes online = yes lock_token = 0x8000 (0x8) paca_index = 0x1 (0xa) kernel_toc = 0xc000000000eb2400 (0x10) kernelbase = 0xc000000000000000 (0x18) kernel_msr = 0xb000000000001032 (0x20) emergency_sp = 0xc00000003ffe8000 (0x28) mc_emergency_sp = 0xc00000003ffe4000 (0x2e0) in_mce = 0x0 (0x2e8) data_offset = 0x7f170000 (0x30) hw_cpu_id = 0x8 (0x38) cpu_start = 0x1 (0x3a) kexec_state = 0x0 (0x3b) [Hit a key (a:all, q:truncate, any:next page)] 0:mon> __current = 0xc00000007e696620 (0x290) kstack = 0xc00000007e6ebe30 (0x298) stab_rr = 0xb (0x2a0) saved_r1 = 0xc00000007ef37860 (0x2a8) trap_save = 0x0 (0x2b8) soft_enabled = 0x0 (0x2ba) irq_happened = 0x1 (0x2bb) io_sync = 0x0 (0x2bc) irq_work_pending = 0x0 (0x2bd) nap_state_lost = 0x0 (0x2be) 0:mon> Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com> [mpe: Use bool, make some variables static] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-10-15powerpc/mpc5xxx: Use of_get_next_parent to simplify codeChristophe Jaillet1-4/+1
of_get_next_parent can be used to simplify the while() loop and avoid the need of a temp variable. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-10-15powerpc/numa: Use of_get_next_parent to simplify codeChristophe Jaillet1-4/+1
of_get_next_parent can be used to simplify the while() loop and avoid the need of a temp variable. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-10-15powerpc: Delete old orphaned PrPMC 280/2800 DTS and boot file.Paul Gortmaker2-868/+0
In commit 3c8464a9b12bf83807b6e2c896d7e7b633e1cae7 ("powerpc: Delete old PrPMC 280/2800 support") we got rid of most of the C code, and the Makefile/Kconfig hooks, but it seems I left the platform's DTS file orphaned in the tree as well as the boot code. Here we get rid of them both. Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-10-15powerpc: discard .exit.data at runtimeStephen Rothwell1-0/+6
.exit.text is discarded at run time and there are some references from that to .exit.data, so we need to discard .exit.data at run time as well. Fixes these errors: `.exit.data' referenced in section `.exit.text' of drivers/built-in.o: defined in discarded section `.exit.data' of drivers/built-in.o `.exit.data' referenced in section `.exit.text' of drivers/built-in.o: defined in discarded section `.exit.data' of drivers/built-in.o Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-10-15powerpc/eeh: atomic_dec_if_positive() to update passthru countGavin Shan1-2/+1
No need to have two atomic opertions (update and fetch/check) when decreasing PE's number of passed devices as one atomic operation is enough. Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-10-15powerpc/pci: export pcibios_free_controller()Andrew Donnellan1-0/+1
Export pcibios_free_controller(), so it can be used by the cxl module to free virtual PHBs. Signed-off-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-10-15powerpc: Individual System V IPC system callsSam bobroff3-1/+25
This patch provides individual system call numbers for the following System V IPC system calls, on PowerPC, so that they do not need to be multiplexed: * semop, semget, semctl, semtimedop * msgsnd, msgrcv, msgget, msgctl * shmat, shmdt, shmget, shmctl Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-10-15powerpc/pseries: Drop always true CONFIG_PSERIES_MSIMichael Ellerman2-7/+1
Now that pseries selects PCI_MSI && PCI, EEH will always be true, and therefore CONFIG_PSERIES_MSI will always be true. So drop it, and move msi.o to obj-y. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-10-15powerpc/pseries: Move PCI objects to obj-yMichael Ellerman1-3/+2
Make it entirely clear in the Makefile that we always build the pci related files by moving them to obj-y. Note that CONFIG_EEH is now always enabled on pseries, because it depends on PSERIES && PCI. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-10-15powerpc/pseries: Remove use of CONFIG_PCIMichael Ellerman2-14/+0
Now that we always have CONFIG_PCI=y for pseries, we can stop guarding code with CONFIG_PCI ifdefs. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-10-15powerpc/pseries: Make PCI non-optionalMichael Ellerman1-1/+1
The pseries build with PCI=n looks to have been broken for at least 5 years, and no one's noticed or cared. Following the obvious breakages backward, the first commit I can find that builds is the parent of 2eb4afb69ff3 ("powerpc/pci: Move pseries code into pseries platform specific area") from April 2009. A distro would never ship a PCI=n kernel, so it is only useful for folks building custom kernels. Also on KVM the virtio devices appear on PCI, so it would only be useful if you were building kernels specifically to run on PowerVM and with no PCI devices. The added code complexity, and testing load (which we've clearly not been doing), is not justified by the small reduction in kernel size for such a niche use case. So just make PCI non-optional on pseries. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-10-12powerpc/mm: Differentiate between hugetlb and THP during page walkAneesh Kumar K.V12-24/+49
We need to properly identify whether a hugepage is an explicit or a transparent hugepage in follow_huge_addr(). We used to depend on hugepage shift argument to do that. But in some case that can result in wrong results. For ex: On finding a transparent hugepage we set hugepage shift to PMD_SHIFT. But we can end up clearing the thp pte, via pmdp_huge_get_and_clear. We do prevent reusing the pfn page via the usage of kick_all_cpus_sync(). But that happens after we updated the pte to 0. Hence in follow_huge_addr() we can find hugepage shift set, but transparent huge page check fail for a thp pte. NOTE: We fixed a variant of this race against thp split in commit 691e95fd7396905a38d98919e9c150dbc3ea21a3 ("powerpc/mm/thp: Make page table walk safe against thp split/collapse") Without this patch, we may hit the BUG_ON(flags & FOLL_GET) in follow_page_mask occasionally. In the long term, we may want to switch ppc64 64k page size config to enable CONFIG_ARCH_WANT_GENERAL_HUGETLB Reported-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-10-12powerpc/mm: Disable hugepd for 64K page size.Aneesh Kumar K.V2-0/+34
After commit e2b3d202d1dba8f3546ed28224ce485bc50010be ("powerpc: Switch 16GB and 16MB explicit hugepages to a different page table format"), we don't need to support is_hugepd() for 64K page size. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-10-09powerpc/pseries/hvcserver: don't memset pi_buff if it is nullColin Ian King1-1/+1
pi_buff is being memset before it is sanity checked. Move the memset after the null pi_buff sanity check to avoid an oops. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-10-09powerpc: Fix _ALIGN_* errors due to type difference.Aneesh Kumar K.V2-4/+5
This avoid errors like unsigned int usize = 1 << 30; int size = 1 << 30; unsigned long addr = 64UL << 30 ; value = _ALIGN_DOWN(addr, usize); -> 0 value = _ALIGN_DOWN(addr, size); -> 0x1000000000 Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-10-06powerpc/kexec: Wait 1s for secondaries to enter OPALSamuel Mendoza-Jonas1-8/+13
Always include a timeout when waiting for secondary cpus to enter OPAL in the kexec path, rather than only when crashing. Signed-off-by: Samuel Mendoza-Jonas <sam.mj@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-10-06powerpc/8xx: Shorten irq_chip name for the SIUChristophe Leroy1-1/+1
show_interrupts() expects the irq_chip name to be max 8 characters otherwise everything get misaligned # cat /proc/interrupts CPU0 17: 0 CPM PIC 0 Level error 19: 0 MPC8XX SIU 15 Level tbint 20: 90 CPM PIC 4 Level cpm_uart 38: 29746 MPC8XX SIU 5 Level fs_enet-mac 39: 0 MPC8XX SIU 7 Level fs_enet-mac 47: 401 CPM PIC 5 Level fsl_spi 68: 1 MPC8XX SIU 2 Level phy_interrupt, phy_interrupt, phy_interrupt LOC: 7225485 Local timer interrupts for timer event device LOC: 9 Local timer interrupts for others SPU: 0 Spurious interrupts PMI: 0 Performance monitoring interrupts MCE: 0 Machine check exceptions Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-10-05powerpc/msi: Free the bitmap if it was slab allocatedDenis Kirjanov2-4/+13
During the MSI bitmap test on boot kmemleak spews the following trace: unreferenced object 0xc00000016e86c900 (size 64): comm "swapper/0", pid 1, jiffies 4294893173 (age 518.024s) hex dump (first 32 bytes): 00 00 01 ff 7f ff 7f 37 00 00 00 00 00 00 00 00 .......7........ ff ff ff ff ff ff ff ff 01 ff ff ff ff ff ff ff ................ backtrace: [<c00000000003eebc>] .zalloc_maybe_bootmem+0x3c/0x380 [<c000000000042d6c>] .msi_bitmap_alloc+0x3c/0xb0 [<c000000000a9aff8>] .msi_bitmap_selftest+0x30/0x2b4 [<c0000000000090f4>] .do_one_initcall+0xd4/0x270 [<c000000000a8e250>] .kernel_init_freeable+0x1a0/0x280 [<c000000000009b5c>] .kernel_init+0x1c/0x120 [<c000000000007fbc>] .ret_from_kernel_thread+0x58/0x9c Add a flag to msi_bitmap for tracking allocations from slab and memblock so we can properly free/handle memory in msi_bitmap_free(). Signed-off-by: Denis Kirjanov <kda@linux-powerpc.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> [mpe: Reword changelog & use bitmap_from_slab in the if] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-10-05powerpc/pseries: re-use code from of_helpers moduleAndy Shevchenko1-26/+5
The derive_parent() has similar semantics to what we have in newly introduced of_helpers module. The replacement reduces code base and propagates the actual error code to the caller. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-10-05powerpc/pseries: handle nodes without '/'Andy Shevchenko1-3/+3
In case we have node without '/' strrchr() returns NULL which might lead to crash. Replace strrchr() by kbasename() and modify condition to avoid such behaviour. Suggested-by: Segher Boessenkool <segher@kernel.crashing.org> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-10-05powerpc/pseries: replace kmalloc + strlcpyAndy Shevchenko1-2/+1
The helper kstrndup() will do the same in one line. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-10-05powerpc/pseries: fix a potential memory leakAndy Shevchenko1-4/+2
In case we have a full node name like /foo/bar and /foo is not found the parent_path left unfreed. So, free a memory before return to a caller. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-10-05powerpc/pseries: extract of_helpers moduleAndy Shevchenko4-32/+49
Extract a new module to share the code between other modules. There is no functional change. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-10-02powerpc/nvram: Fix function name in some errors messages.Christophe Jaillet1-7/+7
'nvram_create_os_partition' should be 'nvram_create_partition'. Use __func__ to have it right, as done elsewhere in this file. Signed-off-by: Christophe Jaillet <christophe.jaillet@wanadoo.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-10-02powerpc/nvram: Add missing kfree in error pathChristophe Jaillet1-0/+1
If 'nvram_write_header' fails, then 'new_part' should be freed, otherwise, there is a memory leak. Signed-off-by: Christophe Jaillet <christophe.jaillet@wanadoo.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-10-01powerpc: Add ppc64le_defconfigMichael Ellerman1-0/+4
Based directly on ppc64_defconfig using merge_config. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-10-01powerpc/mm: Add virt_to_pfn and use this instead of opencodingAneesh Kumar K.V1-2/+3
This add helper virt_to_pfn and remove the opencoded usage of the same. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-10-01powerpc/vdso: Avoid link stack corruption in __get_datapage()Michael Neuling2-10/+14
powerpc has a link register (lr) used for calling functions. We "bl <func>" to call a function, and "blr" to return back to the call site. The lr is only a single register, so if we call another function from inside this function (ie. nested calls), software must save away the lr on the software stack before calling the new function. Before returning (ie. before the "blr"), the lr is restored by software from the software stack. This makes branch prediction quite difficult for the processor as it will only know the branch target just before the "blr". To help with this, modern powerpc processors keep a (non-architected) hardware stack of lr called a "link stack". When a "bl <func>" is run, the lr is pushed onto this stack. When a "blr" is called, the branch predictor pops the lr value from the top of the link stack, and uses it to predict the branch target. Hence the processor pipeline knows a lot earlier the branch target. This works great but there are some cases where you call "bl" but without a matching "blr". Once such case is when trying to determine the program counter (which can't be read directly). Here you "bl+4; mflr" to get the program counter. If you do this, the link stack will get out of sync with reality, causing the branch predictor to mis-predict subsequent function returns. To avoid this, modern micro-architectures have a special case of bl. Using the form "bcl 20,31,+4", ensures the processor doesn't push to the link stack. The 32 and 64 bit variants of __get_datapage() use a "bl; mflr" to determine the loaded address of the VDSO. The current versions of these attempt to use this special bl variant. Unfortunately they use +8 rather than the required +4. Hence the current code results in the link stack getting out of sync with reality and hence the resulting performance degradation. This patch moves it to bcl+4 by moving __kernel_datapage_offset out of __get_datapage(). With this patch, running a gettimeofday() (which uses __get_datapage()) microbenchmark we get a decent bump in performance on POWER7/8. For the benchmark in tools/testing/selftests/powerpc/benchmarks/gettimeofday.c POWER8: 64bit gets ~4% improvement 32bit gets ~9% improvement POWER7: 64bit gets ~7% improvement Signed-off-by: Michael Neuling <mikey@neuling.org> Reported-by: Aaron Sawdey <sawdey@us.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-10-01powerpc/slb: Use a local to avoid multiple calls to get_slb_shadow()Michael Ellerman1-5/+5
For no reason other than it looks ugly. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-10-01powerpc/slb: Define an enum for the bolted indexesAnshuman Khandual1-21/+26
This patch defines macros for the three bolted SLB indexes we use. Switch the functions that take the indexes as an argument to use the enum. Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-10-01powerpc/vdso: Emit GNU & SysV hashesMichael Ellerman2-2/+2
Andy Lutomirski says: Some dynamic loaders may be slightly faster if a GNU hash is available. This is unlikely to have any measurable effect on the time it takes to resolve vdso symbols (since there are so few of them). In some contexts, it can be a win for a different reason: if every DSO has a GNU hash section, then libc can avoid calculating SysV hashes at all. Both musl and glibc appear to have this optimization. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-09-29powerpc/ps3: Refresh ps3_defconfigGeoff Levand1-5/+0
Refresh and remove obsolete CONFIG_EXT3_FS. Signed-off-by: Geoff Levand <geoff@infradead.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-09-29powerpc: Kconfig: remove BE-only platforms from LE kernel buildBoqun Feng5-6/+6
Currently, little endian is only supported on powernv and pseries, however, Kconfigs still allow us to include other platforms in a LE kernel, this may result in space wasting or even build error if some BE-only platforms always assume they are built for a BE kernel. So just modify the Kconfigs of BE-only platforms to remove them from being built for a LE kernel. For 32bit only platforms, nothing needs to be done, because CPU_LITTLE_ENDIAN depends on PPC64. For 64bit supported platforms, add CPU_BIG_ENDIAN to dependencies explicitly, so that these platforms will be disabled for LE [Suggested-by: Cédric Le Goater <clg@fr.ibm.com>]. Signed-off-by: Boqun Feng <boqun.feng@gmail.com> Acked-by: Geoff Levand <geoff@infradead.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-09-27Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds2-5/+27
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Thomas Gleixner: "Two bugfixes from Andy addressing at least some of the subtle NMI related wreckage which has been reported by Sasha Levin" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/nmi/64: Fix a paravirt stack-clobbering bug in the NMI code x86/paravirt: Replace the paravirt nop with a bona fide empty function
2015-09-27Merge branch 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-armLinus Torvalds4-6/+30
Pull ARM fixes from Russell King: "Just two fixes: wire up the new system calls added during the last merge window, and fix another user access site" * 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: ARM: alignment: fix alignment handling for uaccess changes ARM: wire up new syscalls
2015-09-27Merge tag 'armsoc-fixes' of ↵Linus Torvalds31-161/+205
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "Our first real batch of fixes this release cycle. Nothing really concerning, and diffstat is a bit inflated due to some DT contents moving around on STi platforms. There's a collection of them here: - A fixup for a build breakage that hits on arm64 allmodconfig in QCOM SCM firmware drivers - MMC fixes for OMAP that had quite a bit of breakage this merge window. - Misc build/warning fixes on PXA and OMAP - A couple of minor fixes for Beagleboard X15 which is now starting to see a few more users in the wild" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (31 commits) ARM: sti: dt: adapt DT to fix probe/bind issues in DRM driver ARM: dts: fix omap2+ address translation for pbias firmware: qcom: scm: Add function stubs for ARM64 ARM: dts: am57xx-beagle-x15: use palmas-usb for USB2 ARM: omap2plus_defconfig: enable GPIO_PCA953X ARM: dts: omap5-uevm.dts: fix i2c5 pinctrl offsets ARM: OMAP2+: AM43XX: Enable autoidle for clks in am43xx_init_late ARM: dts: am57xx-beagle-x15: Update Phy supplies ARM: pxa: balloon3: Fix build error ARM: dts: Fixup model name for HP t410 dts ARM: dts: DRA7: fix a typo in ethernet ARM: omap2plus_defconfig: make PCF857x built-in ARM: dts: Use ti,pbias compatible string for pbias ARM: OMAP5: Cleanup options for SoC only build ARM: DRA7: Select missing options for SoC only build ARM: OMAP2+: board-generic: Remove stale of_irq macros ARM: OMAP4+: PM: erratum is used by OMAP5 and DRA7 as well ARM: dts: omap3-igep: Move eth IRQ pinmux to IGEPv2 common dtsi ARM: dts: am57xx-beagle-x15: Add wakeup irq for mcp79410 ARM: dts: am335x-phycore-som: Fix mpu voltage ...
2015-09-27Merge tag 'pxa-fixes-v4.3' of https://github.com/rjarzmik/linux into fixesOlof Johansson4-3/+28
ARM: pxa: fixes for v4.3 These fixes are mainly regression fixes triggered by irq changes, common clock framework introduction and sound side-effect of other platforms. * tag 'pxa-fixes-v4.3' of https://github.com/rjarzmik/linux: ARM: pxa: balloon3: Fix build error ARM: pxa: ssp: Fix build error by removing originally incorrect DT binding ARM: pxa: fix DFI bus lockups on startup Signed-off-by: Olof Johansson <olof@lixom.net>
2015-09-27Merge tag 'omap-for-v4.3/fixes-rc2' of ↵Olof Johansson14-39/+63
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes Fixes for omaps for v4.3-rc cycle: - Two more patches to fix most of the MMC regressions with the PBIAS regulator changes. At least two MMC driver related issues still seems to remain for omap3 legacy booting and omap4 duovero. Note that the dts changes depend on a recent regulator fix, and are based on the regulator commit now in mainline kernel - Enable autoidle for am43xx clocks to prevent clocks from staying always on - Fix i2c5 pinctrl offsets for omap5-uevm - Enable PCA953X as that's needed for HDMI to work on omap5 - Update phy supplies for beagle x15 beta board - Use palmas-usb for on beagle x15 to start using the related driver that recently got merged * tag 'omap-for-v4.3/fixes-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: fix omap2+ address translation for pbias ARM: dts: am57xx-beagle-x15: use palmas-usb for USB2 ARM: omap2plus_defconfig: enable GPIO_PCA953X ARM: dts: omap5-uevm.dts: fix i2c5 pinctrl offsets ARM: OMAP2+: AM43XX: Enable autoidle for clks in am43xx_init_late ARM: dts: am57xx-beagle-x15: Update Phy supplies regulator: pbias: program pbias register offset in pbias driver ARM: omap2plus_defconfig: Enable MUSB DMA support ARM: DRA752: Add ID detect for ES2.0 ARM: OMAP3: vc: fix 'or' always true warning ARM: OMAP2+: Fix booting if no timer parent clock is available ARM: OMAP2+: omap-device: fix race deferred probe of omap_hsmmc vs omap_device_late_init Signed-off-by: Olof Johansson <olof@lixom.net>
2015-09-25Merge tag 'pci-v4.3-fixes-1' of ↵Linus Torvalds9-5/+38
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI fixes from Bjorn Helgaas: "These are fixes for things we merged for v4.3 (VPD, MSI, and bridge window management), and a new Renesas R8A7794 SoC device ID. Details: Resource management: - Revert pci_read_bridge_bases() unification (Bjorn Helgaas) - Clear IORESOURCE_UNSET when clipping a bridge window (Bjorn Helgaas) MSI: - Fix MSI IRQ domains for VFs on virtual buses (Alex Williamson) Renesas R-Car host bridge driver: - Add R8A7794 support (Sergei Shtylyov) Miscellaneous: - Fix devfn for VPD access through function 0 (Alex Williamson) - Use function 0 VPD only for identical functions (Alex Williamson)" * tag 'pci-v4.3-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI: rcar: Add R8A7794 support PCI: Use function 0 VPD for identical functions, regular VPD for others PCI: Fix devfn for VPD access through function 0 PCI/MSI: Fix MSI IRQ domains for VFs on virtual buses PCI: Clear IORESOURCE_UNSET when clipping a bridge window PCI: Revert "PCI: Call pci_read_bridge_bases() from core instead of arch code"
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-30 16:59:36 +0300