summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)AuthorFilesLines
2013-01-23KVM: ARM: Memory virtualization setupChristoffer Dall8-2/+488
This commit introduces the framework for guest memory management through the use of 2nd stage translation. Each VM has a pointer to a level-1 table (the pgd field in struct kvm_arch) which is used for the 2nd stage translations. Entries are added when handling guest faults (later patch) and the table itself can be allocated and freed through the following functions implemented in arch/arm/kvm/arm_mmu.c: - kvm_alloc_stage2_pgd(struct kvm *kvm); - kvm_free_stage2_pgd(struct kvm *kvm); Each entry in TLBs and caches are tagged with a VMID identifier in addition to ASIDs. The VMIDs are assigned consecutively to VMs in the order that VMs are executed, and caches and tlbs are invalidated when the VMID space has been used to allow for more than 255 simultaenously running guests. The 2nd stage pgd is allocated in kvm_arch_init_vm(). The table is freed in kvm_arch_destroy_vm(). Both functions are called from the main KVM code. We pre-allocate page table memory to be able to synchronize using a spinlock and be called under rcu_read_lock from the MMU notifiers. We steal the mmu_memory_cache implementation from x86 and adapt for our specific usage. We support MMU notifiers (thanks to Marc Zyngier) through kvm_unmap_hva and kvm_set_spte_hva. Finally, define kvm_phys_addr_ioremap() to map a device at a guest IPA, which is used by VGIC support to map the virtual CPU interface registers to the guest. This support is added by Marc Zyngier. Reviewed-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
2013-01-23KVM: ARM: Hypervisor initializationChristoffer Dall9-0/+755
Sets up KVM code to handle all exceptions taken to Hyp mode. When the kernel is booted in Hyp mode, calling an hvc instruction with r0 pointing to the new vectors, the HVBAR is changed to the the vector pointers. This allows subsystems (like KVM here) to execute code in Hyp-mode with the MMU disabled. We initialize other Hyp-mode registers and enables the MMU for Hyp-mode from the id-mapped hyp initialization code. Afterwards, the HVBAR is changed to point to KVM Hyp vectors used to catch guest faults and to switch to Hyp mode to perform a world-switch into a KVM guest. Also provides memory mapping code to map required code pages, data structures, and I/O regions accessed in Hyp mode at the same virtual address as the host kernel virtual addresses, but which conforms to the architectural requirements for translations in Hyp mode. This interface is added in arch/arm/kvm/arm_mmu.c and comprises: - create_hyp_mappings(from, to); - create_hyp_io_mappings(from, to, phys_addr); - free_hyp_pmds(); Reviewed-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
2013-01-23KVM: ARM: Initial skeleton to compile KVM supportChristoffer Dall19-0/+1385
Targets KVM support for Cortex A-15 processors. Contains all the framework components, make files, header files, some tracing functionality, and basic user space API. Only supported core is Cortex-A15 for now. Most functionality is in arch/arm/kvm/* or arch/arm/include/asm/kvm_*.h. Reviewed-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
2013-01-23ARM: Section based HYP idmapChristoffer Dall4-12/+51
Add a method (hyp_idmap_setup) to populate a hyp pgd with an identity mapping of the code contained in the .hyp.idmap.text section. Offer a method to drop this identity mapping through hyp_idmap_teardown. Make all the above depend on CONFIG_ARM_VIRT_EXT and CONFIG_ARM_LPAE. Reviewed-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
2013-01-23ARM: Add page table and page defines needed by KVMChristoffer Dall3-0/+47
KVM uses the stage-2 page tables and the Hyp page table format, so we define the fields and page protection flags needed by KVM. The nomenclature is this: - page_hyp: PL2 code/data mappings - page_hyp_device: PL2 device mappings (vgic access) - page_s2: Stage-2 code/data page mappings - page_s2_device: Stage-2 device mappings (vgic access) Reviewed-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Christoffer Dall <c.dall@virtualopensystems.com>
2013-01-18ARM: perf: simplify __hw_perf_event_init err handlingMark Rutland1-5/+3
Currently __hw_perf_event_init has an err variable that's ignored right until the end, where it's initialised, conditionally set, and then used as a boolean flag deciding whether to return another error code. This patch removes the err variable and simplifies the associated error handling logic. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2013-01-18ARM: perf: remove unnecessary checks for idx < 0Mark Rutland1-8/+0
We currently check for hwx->idx < 0 in armpmu_read and armpmu_del unnecessarily. The only case where hwc->idx < 0 is when armpmu_add fails, in which case the event's state is set to PERF_EVENT_STATE_INACTIVE. The perf core will not attempt to read from an event in PERF_EVENT_STATE_INACTIVE, and so the check in armpmu_read is unnecessary. Similarly, if perf core cannot add an event it will not attempt to delete it, so the WARN_ON in armpmu_del is unnecessary. This patch removes these two redundant checks. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2013-01-18ARM: perf: handle armpmu_register failingMark Rutland1-5/+10
Currently perf_pmu_register may fail for several reasons (e.g. being unable to allocate memory for the struct device it associates with each PMU), and while any error is propagated by armpmu_register, it is ignored by cpu_pmu_device_probe and not propagated to the caller. This also results in a leak of a struct arm_pmu. This patch adds cleanup if armpmu_register fails, and updates the info messages to better differentiate this type of failure from a failure to probe the PMU type from the hardware or dt. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2013-01-16ARM: perf: don't pretend to support counting of L1I writesWill Deacon3-12/+12
ARM has a harvard cache architecture and cannot write directly to the I-side. This patch removes the L1I write events from the cache map (which previously returned *read* events in many cases). Reported-by: Mike Williams <michael.williams@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2013-01-14ARM: perf: remove redundant NULL check on cpu_pmuWill Deacon1-1/+1
cpu_pmu has already been dereferenced before we consider invoking the ->reset function, so remove the redundant NULL check. Reported-by: Cong Ding <dinggnu@gmail.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2013-01-11ARM: Use implementor and part defines from cputype.hChristoffer Dall1-18/+16
Instead of decoding implementor numbers, part numbers and Xscale architecture masks inline in the pmu probing function, use defines and accessor functions from cputype.h, which can also be shared by other subsystems, such as KVM. Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2013-01-11ARM: Define CPU part numbers and implementorsChristoffer Dall1-0/+33
Define implementor IDs, part numbers and Xscale architecture versions in cputype.h. Also create accessor functions for reading the implementor, part number, and Xscale architecture versions from the CPUID regiser. Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2013-01-09Merge branch 'fixes' of git://git.linaro.org/people/rmk/linux-armLinus Torvalds7-22/+40
Pull ARM fixes from Russell King. * 'fixes' of git://git.linaro.org/people/rmk/linux-arm: ARM: 7616/1: cache-l2x0: aurora: Use writel_relaxed instead of writel ARM: 7615/1: cache-l2x0: aurora: Invalidate during clean operation with WT enable ARM: 7614/1: mm: fix wrong branch from Cortex-A9 to PJ4b ARM: 7612/1: imx: Do not select some errata that depends on !ARCH_MULTIPLATFORM ARM: 7611/1: VIC: fix bug in VIC irqdomain code ARM: 7610/1: versatile: bump IRQ numbers ARM: 7609/1: disable errata work-arounds which access secure registers ARM: 7608/1: l2x0: Only set .set_debug on PL310 r3p0 and earlier
2013-01-09Merge tag 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds43-137/+305
Pull ARM SoC fixes from Olof Johansson: "People are back from the holiday breaks, and it shows. Here are a bunch of fixes for a number of platforms: - A couple of small fixes for Nomadik - A larger set of changes for kirkwood/mvebu - uart driver selection, dt clocks, gpio-poweroff fixups, a few __init annotation fixes and some error handling improvement in their xor dma driver. - i.MX had a couple of minor fixes (and a critical one for flexcan2 clock setup) - MXS has a small board fix and a framebuffer bugfix - A set of fixes for Samsung Exynos, fixing default bootargs and some Exynos5440 clock issues - A set of OMAP changes including PM fixes and a few sparse warning fixups All in all a bit more positive code delta than we'd ideally want to see here, mostly from the OMAP PM changes, but nothing overly crazy." * tag 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (44 commits) ARM: clps711x: Fix bad merge of clockevents setup ARM: highbank: save and restore L2 cache and GIC on suspend ARM: highbank: add a power request clear ARM: highbank: fix secondary boot and hotplug ARM: highbank: fix typos with hignbank in power request functions ARM: dts: fix highbank cpu mpidr values ARM: dts: add device_type prop to cpu nodes on Calxeda platforms ARM: mx5: Fix MX53 flexcan2 clock ARM: OMAP2+: am33xx-hwmod: Fix wrongly terminated am33xx_usbss_mpu_irqs array pinctrl: mvebu: make pdma clock on dove mandatory ARM: Dove: Add pinctrl clock to DT dma: mv_xor: fix error handling for clocks dma: mv_xor: fix error handling of mv_xor_channel_add() arm: mvebu: Add missing ; for cpu node. arm: mvebu: Armada XP MV78230 has only three Ethernet interfaces arm: mvebu: Armada XP MV78230 has two cores, not one clk: mvebu: Remove inappropriate __init tagging ARM: Kirkwood: Use fixed-regulator instead of board gpio call ARM: Kirkwood: Fix missing sdio clock ARM: Kirkwood: Switch TWSI1 of 88f6282 to DT clock providers ...
2013-01-08Merge tag 'omap-for-v3.8-rc2/fixes-signed-v2' of ↵Olof Johansson11-38/+132
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes From Tony Lindgren: The biggest change is a fix to deal with different power state on omap2 registers that causes issues trying to use common PM code. Also fix few incorrect registers, and an issue for omap1 USB, and few sparse fixes for issues that sneaked in with all the clean-up. * tag 'omap-for-v3.8-rc2/fixes-signed-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP2+: am33xx-hwmod: Fix wrongly terminated am33xx_usbss_mpu_irqs array ARM: OMAP1: fix USB configuration use-after-release ARM: OMAP2/3: PRM: fix bogus OMAP2xxx powerstate return values ARM: OMAP3: clock data: Add missing enable/disable for EMU clock ARM: OMAP4: PRM: Correct wrong instance usage for reading reset sources ARM: OMAP4: PRM: fix RSTTIME and RSTST offsets ARM: OMAP4: PRM: Correct reset source map ARM: OMAP: SRAM: resolve sparse warnings ARM: OMAP AM33xx: hwmod data: resolve sparse warnings ARM: OMAP: 32k counter: resolve sparse warnings Signed-off-by: Olof Johansson <olof@lixom.net>
2013-01-08Merge branch 'v3.8-samsung-fixes-2' of ↵Olof Johansson6-4/+13
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into fixes From Kukjin Kim: Most of them are EXYNOS5440 fixes which are for changing uart console, cpu id (typo) and silent complaining gpio error in kernel boot. * 'v3.8-samsung-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: EXYNOS: skip the clock initialization for exynos5440 ARM: EXYNOS: enable PINCTRL for EXYNOS5440 ARM: dts: use uart port1 for console on exynos4210-smdkv310 ARM: dts: use uart port0 for console on exynos5440-ssdk5440 ARM: SAMSUNG: fix the cpu id for EXYNOS5440 ARM: EXYNOS: Revise HDMI resource size
2013-01-08Merge tag 'mxs-fixes-3.8' of git://git.linaro.org/people/shawnguo/linux-2.6 ↵Olof Johansson1-4/+4
into fixes From Shawn Guo: I have to send one critical mxsfb fix through arm-soc, as FB maintainer is unresponsive for quite a while. People start complaining the missing of such an important fix. * tag 'mxs-fixes-3.8' of git://git.linaro.org/people/shawnguo/linux-2.6: video: mxsfb: fix crash when unblanking the display ARM: dts: imx23-olinuxino: Fix IOMUX settings
2013-01-08Merge tag 'imx-fixes-3.8' of git://git.linaro.org/people/shawnguo/linux-2.6 ↵Olof Johansson2-2/+2
into fixes From Shawn Guo: It includes one critical fix - wrong flexcan2 clock will hang system when the port gets brought up. The other two are non-critical fixes, which are sent together here, since it's still early -rc stage. * tag 'imx-fixes-3.8' of git://git.linaro.org/people/shawnguo/linux-2.6: ARM: mx5: Fix MX53 flexcan2 clock ARM: dts: imx31-bug: Fix manufacturer compatible string clk: imx: Remove 'clock-output-names' from the examples
2013-01-08Merge tag 'mvebu_fixes_for_v3.8' of ↵Olof Johansson12-20/+57
git://git.infradead.org/users/jcooper/linux into fixes From Jason Cooper: fixes for mvebu/kirkwood v3.8 - use correct uart driver for mvebu boards - add a missing DT clocks - gpio-poweroff level vs. edge triggering, use gpio_is_valid() - remove an inappropriate __init, modules need to access function. - various DT fixes - error handling in mv_xor * tag 'mvebu_fixes_for_v3.8' of git://git.infradead.org/users/jcooper/linux: pinctrl: mvebu: make pdma clock on dove mandatory ARM: Dove: Add pinctrl clock to DT dma: mv_xor: fix error handling for clocks dma: mv_xor: fix error handling of mv_xor_channel_add() arm: mvebu: Add missing ; for cpu node. arm: mvebu: Armada XP MV78230 has only three Ethernet interfaces arm: mvebu: Armada XP MV78230 has two cores, not one clk: mvebu: Remove inappropriate __init tagging ARM: Kirkwood: Use fixed-regulator instead of board gpio call ARM: Kirkwood: Fix missing sdio clock ARM: Kirkwood: Switch TWSI1 of 88f6282 to DT clock providers Power: gpio-poweroff: Fix documentation and gpio_is_valid ARM: Kirkwood: Fix missing clk for USB device. arm: mvebu: Use dw-apb-uart instead of ns16650 as UART driver Signed-off-by: Olof Johansson <olof@lixom.net>
2013-01-08ARM: clps711x: Fix bad merge of clockevents setupOlof Johansson1-1/+0
I mismerged a previous branch from Alexander, and accidentally left in ARCH_USES_GETTIMEOFFSET. Remove it. Signed-off-by: Olof Johansson <olof@lixom.net> Cc: Alexander Shiyan <shc_work@mail.ru>
2013-01-08Merge tag 'nomadik-fixes-for-arm-soc' of ↵Olof Johansson2-40/+39
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik into fixes From Linus Walleij: Two fixes to the Nomadik: - Delete a dangling include - Bump IRQ numbers to offset at 32 * tag 'nomadik-fixes-for-arm-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik: ARM: nomadik: bump the IRQ numbers again ARM: nomadik: delete dangling include
2013-01-08ARM: highbank: save and restore L2 cache and GIC on suspendRob Herring1-1/+18
This fixes suspend to RAM adding necessary save and restore of L2 and GIC. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-01-08ARM: highbank: add a power request clearRob Herring1-0/+15
When we fail to power down, we need to clear out the power request. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-01-08ARM: highbank: fix secondary boot and hotplugRob Herring2-12/+2
With commit 384a290 (ARM: gic: use a private mapping for CPU target interfaces), wake-up IPIs now go to all cores as the gic cpu interface numbering may not follow core numbering. This broke secondary boot on highbank since the boot address was already set for all secondary cores, this caused all cores to boot before the kernel was ready. Fix this by moving the setting of the jump address to highbank_boot_secondary instead of highbank_smp_prepare_cpus and highbank_cpu_die. Also, clear the address when we boot. This prevents cores from booting before they are actually triggered and is also necessary to get suspend/resume to work. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Nicolas Pitre <nicolas.pitre@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-01-08ARM: highbank: fix typos with hignbank in power request functionsRob Herring4-8/+8
s/hignbank/highbank/ Signed-off-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-01-08ARM: dts: fix highbank cpu mpidr valuesRob Herring1-8/+8
With the addition of commit a0ae0240 (ARM: kernel: add device tree init map function), the cpu reg values must match the cpu mpidr register or we'll get warnings. For some reason, the CLUSTERID on highbank is 9, so the reg value needs to be 0x90n to quiet the warnings. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-01-08ARM: dts: add device_type prop to cpu nodes on Calxeda platformsRob Herring2-0/+8
While device_type is considered deprecated, it is still needed for tools like lshw to identify cpu nodes. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-01-08ARM: mx5: Fix MX53 flexcan2 clockMarek Vasut1-1/+1
The second FlexCAN port uses different clock than the first one, configure correct clock to prevent hanging of the system during bringing up of the port. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-01-08ARM: OMAP2+: am33xx-hwmod: Fix wrongly terminated am33xx_usbss_mpu_irqs arrayPantelis Antoniou1-1/+1
The IRQ array must be terminated by -1 and not by -1+OMAP_INTC_START This led to having a resource list of 100s of IRQs. Looks like this was caused by commit a2cfc509 (ARM: OMAP3+: hwmod: Add AM33XX HWMOD data) that probably had some search and replace updates done for the patch for sparse irq support. Signed-off-by: Pantelis Antoniou <panto@antoniou-consulting.com> Acked-by: Paul Walmsley <paul@pwsan.com> [tony@atomide.com: updated wit information about the breaking commit] Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-01-07ARM: Dove: Add pinctrl clock to DTSebastian Hesselbarth1-0/+1
During merge of the mvebu patches a clock gate for pinctrl was lost. This patch just readds the clock gate. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-01-07Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds22-104/+44
Pull MIPS fixes from Ralf Baechle: "Various fixes across the tree. The modpost error due to virt_addr_valid() not being usable from modules required a number of preparatory cleanups so a clean fix was possible." * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: MIPS: 64-bit: Fix build if !CONFIG_MODULES MIPS: Wire up finit_module syscall. MIPS: Fix modpost error in modules attepting to use virt_addr_valid(). MIPS: page.h: Remove now unnecessary #ifndef __ASSEMBLY__ wrapper. MIPS: Switch remaining assembler PAGE_SIZE users to <asm/asm-offsets.h>. MIPS: Include PAGE_S{IZE,HIFT} in <asm/offset.h>. MIPS: Don't include <asm/page.h> unnecessarily. MIPS: Fix comment. Revert "MIPS: Optimise TLB handlers for MIPS32/64 R2 cores." MIPS: perf: Fix build failure in XLP perf support. MIPS: Alchemy: Make 32kHz and r4k timer coexist peacefully
2013-01-07Merge branch 'next' of git://git.monstr.eu/linux-2.6-microblazeLinus Torvalds8-56/+90
Pull microblaze update from Michal Simek: "This fixes noMMU kernel and I have also added defconfig updates which fix issue with one external dependency and enable all xilinx device drivers for 0-day testing system. Additionally wire up finit_module system call, and do highmem fixup and pci warnings reported by the 0-day testing system" * 'next' of git://git.monstr.eu/linux-2.6-microblaze: microblaze: Update microblaze defconfigs microblaze: Fix pci compilation and sparse warnings microblaze: Add finit_module syscall microblaze: Kill __kmap_atomic() microblaze: Change section flags for noMMU microblaze: Microblaze wants sys_fork for noMMU too
2013-01-07ARM: 7616/1: cache-l2x0: aurora: Use writel_relaxed instead of writelGregory CLEMENT1-4/+5
The use of writel instead of writel_relaxed lead to deadlock in some situation (SMP on Armada 370 for instance). The use of writel_relaxed as it was done in the rest of this driver fixes this bug. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Jason Cooper <jason@lakedaemon.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-01-07ARM: 7615/1: cache-l2x0: aurora: Invalidate during clean operation with WT ↵Gregory CLEMENT1-8/+14
enable This patch fixes a bug for Aurora L2 cache controller when the write-through mode is enable. For the clean operation even if we don't have to flush the lines we still need to invalidate them. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Jason Cooper <jason@lakedaemon.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-01-06ARM: 7614/1: mm: fix wrong branch from Cortex-A9 to PJ4bHaojian Zhuang1-0/+1
If CONFIG_ARCH_MULTIPLATFORM & CONFIG_ARCH_MVEBU are both enabled, __v7_pj4b_setup is added between __v7_ca9mp_setup and __v7_setup. But there's no jump instruction added. If the chip is Cortex A5/A9, it goes through __v7_pj4b_setup also. It results in system hang. Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-01-06ARM: 7612/1: imx: Do not select some errata that depends on !ARCH_MULTIPLATFORMFabio Estevam1-2/+0
Since commit 62e4d357a (ARM: 7609/1: disable errata work-arounds which access secure registers) ARM_ERRATA_743622/751472 depends on !ARCH_MULTIPLATFORM. Since imx has been converted to multiplatform, the following warning happens: $ make imx_v6_v7_defconfig warning: (SOC_IMX6Q && ARCH_TEGRA_2x_SOC && ARCH_TEGRA_3x_SOC) selects ARM_ERRATA_751472 which has unmet direct dependencies (CPU_V7 && !ARCH_MULTIPLATFORM) warning: (SOC_IMX6Q && ARCH_TEGRA_3x_SOC) selects ARM_ERRATA_743622 which has unmet direct dependencies (CPU_V7 && !ARCH_MULTIPLATFORM) warning: (SOC_IMX6Q && ARCH_TEGRA_3x_SOC) selects ARM_ERRATA_743622 which has unmet direct dependencies (CPU_V7 && !ARCH_MULTIPLATFORM) warning: (SOC_IMX6Q && ARCH_TEGRA_2x_SOC && ARCH_TEGRA_3x_SOC) selects ARM_ERRATA_751472 which has unmet direct dependencies (CPU_V7 && !ARCH_MULTIPLATFORM) Recommended approach is to remove ARM_ERRATA_743622/751472 from being selected by SOC_IMX6Q and apply such workarounds into the bootloader. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-01-06arm: mvebu: Add missing ; for cpu node.Andrew Lunn1-1/+1
The Armada XP MV78230 DT include file is missing a ; at the end of the cpu node. Reported-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-01-06arm: mvebu: Armada XP MV78230 has only three Ethernet interfacesThomas Petazzoni3-8/+16
We originally thought that the MV78230 variant of the Armada XP had four Ethernet interfaces, like the other variants MV78260 and MV78460. In fact, this is not true, and the MV78230 has only three Ethernet interfaces. So, the definitions of the Ethernet interfaces is now done as follows: * armada-370-xp.dtsi: definitions of the first two interfaces, that are common to Armada 370 and Armada XP * armada-xp.dtsi: definition of the third interface, common to all Armada XP variants. * armada-xp-mv78260.dtsi and armada-xp-mv78460.dtsi: definition of the fourth interface. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-01-06arm: mvebu: Armada XP MV78230 has two cores, not oneThomas Petazzoni1-0/+7
Contrary to our understanding at the time armada-xp-mv78230.dtsi was written, the MV78230 variant of the Armada XP SoC has two cores and not one. This patch updates the .dtsi file to take into account this reality. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-01-06ARM: Kirkwood: Use fixed-regulator instead of board gpio callAndrew Lunn2-4/+17
With the change to a DT based pinctrl/gpio driver, using gpio API calls in board-*.c files no longer works, a dereferenced NULL pointer exception occurs instead. By converting the GPIO code into a fixed-regulator which gets probed later once pinctrl/gpio is available, we avoid the exception. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Stefan Peter <s.peter@mplch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-01-06ARM: Kirkwood: Fix missing sdio clockAndrew Lunn1-0/+4
We moved to declaring clk gates in DT. However, device which do not yet have a DT binding need to have a clkdev alias. This was missing for SDIO. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Stefan Peter <s.peter@mplch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-01-06ARM: Kirkwood: Switch TWSI1 of 88f6282 to DT clock providersNobuhiro Iwamatsu1-0/+1
Clock Management of kirkwood has moved to DT clock providers. However, TWSI1 has not yet been done. This switches TWSI1 of 88f6282 to DT clock providers. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-01-06ARM: Kirkwood: Fix missing clk for USB device.Andrew Lunn1-0/+1
Without the clock being held by a driver, it gets turned off at a bad time causing the SoC to lockup. This is often during reboot. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Stefan Peter <s.peter@mpl.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-01-06arm: mvebu: Use dw-apb-uart instead of ns16650 as UART driverGregory CLEMENT3-7/+9
The UART controller used in the Armada 370 and Armada XP SoCs is the Synopsys DesignWare 8250 (aka Synopsys DesignWare ABP UART). The improper use of the ns16550 can lead to a kernel oops during boot if a character is sent to the UART before the initialization of the driver. The DW APB has an extra interrupt that gets raised when writing to the LCR when busy. This explains why we need to use dw-apb-uart driver to handle this. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-01-05ARM: EXYNOS: skip the clock initialization for exynos5440Kukjin Kim1-0/+7
Since exynos5440 can support only common clk stuff, so this patch skips legacy exynos5 clock initialization. Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-01-04Merge tag 'arm64-fixes' of ↵Linus Torvalds2-1/+6
git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64 Pull ARM64 fixes from Catalin Marinas: - Missing include in asm/compat.h. - Kconfig updates. * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64: arm64: Always select ARM_AMBA and GENERIC_GPIO arm64: Keep the ARM64 Kconfig selects sorted arm64: Include linux/ptrace.h in asm/compat.h
2013-01-04arm64: Always select ARM_AMBA and GENERIC_GPIOCatalin Marinas1-0/+4
Needed for most SoCs. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2013-01-04microblaze: Update microblaze defconfigsMichal Simek2-45/+80
The main reason is 0-day testing system which can directly use these defconfigs for testing. Enable support for all xilinx drivers which Microblaze can use and disable dependency on external rootfs.cpio. There is only one exception which is axi ethernet driver which still uses NO_IRQ which is not defined for Microblaze. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2013-01-04microblaze: Fix pci compilation and sparse warningsMichal Simek1-6/+5
Warning log: CHECK arch/microblaze/pci/pci-common.c arch/microblaze/pci/pci-common.c:290:14: warning: Using plain integer as NULL pointer arch/microblaze/pci/pci-common.c:1127:6: warning: symbol 'pcibios_allocate_bus_resources' was not declared. Should it be static? arch/microblaze/pci/pci-common.c:1436:61: warning: incorrect type in argument 3 (different base types) arch/microblaze/pci/pci-common.c:1436:61: expected unsigned int [unsigned] [usertype] offset arch/microblaze/pci/pci-common.c:1436:61: got void [noderef] <asn:2>* CC arch/microblaze/pci/pci-common.o arch/microblaze/pci/pci-common.c: In function 'pci_proc_domain': arch/microblaze/pci/pci-common.c:825:25: warning: unused variable 'hose' [-Wunused-variable] arch/microblaze/pci/pci-common.c: In function 'pcibios_allocate_bus_resources': arch/microblaze/pci/pci-common.c:1182:1: warning: label 'clear_resource' defined but not used [-Wunused-label] arch/microblaze/pci/pci-common.c: In function 'pcibios_setup_phb_resources': arch/microblaze/pci/pci-common.c:1436:2: warning: passing argument 3 of 'pci_add_resource_offset' makes integer from pointer without a cast [enabled by default] include/linux/pci.h:999:6: note: expected 'resource_size_t' but argument is of type 'void *' Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2013-01-04ARM: dts: imx31-bug: Fix manufacturer compatible stringFabio Estevam1-1/+1
In the compatible field we should point the manufacturer of the board, which in this case is Buglabs. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-01-26 04:56:23 +0300