summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)AuthorFilesLines
2015-12-10ARM: shmobile: ape6evm dts: Add serial port config to chosen/stdout-pathGeert Uytterhoeven1-1/+1
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-12-10ARM: shmobile: alt dts: Add serial port config to chosen/stdout-pathGeert Uytterhoeven1-1/+1
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-12-10ARM: shmobile: koelsch dts: Add serial port config to chosen/stdout-pathGeert Uytterhoeven1-1/+1
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-12-08ARM: shmobile: r8a7778: tidyup #sound-dai-cells settingsKuninori Morimoto1-1/+6
Renesas sound driver needs #sound-dai-cells settings, but, this usage is a little bit confusable. It came from ALSA SoC historical reasons. The sound DAI naming method is different between Single/Multi DAI in the ALSA framework, and it is used for sound card matching. And this #sound-dai-cells has relationship to it. Current SoC dtsi has #sound-dai-cells = <1> as default settings (= it is assuming that board/platform has multi DAI), and board/platform side needs to overwrite it if board/platform was single DAI. This style is more confusable for users. This patch removes SoC side default settings, and force to set it by board/platform side. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-12-08ARM: shmobile: bockw dts: Override #sound-dai-cells to zeroGeert Uytterhoeven1-0/+5
The default value of #sound-dai-cells in r8a7778.dtsi is one, while the /sound/simple-audio-card,cpu device node in r8a7778-bockw.dts uses a phandle without any extra cells ("<&rcar_sound>"), causing: /sound/simple-audio-card,cpu: arguments longer than property asoc-simple-card sound: parse error -22 asoc-simple-card: probe of sound failed with error -22 Override #sound-dai-cells to zero to fix this. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-12-07ARM: shmobile: r8a7793: remove deprecated #gpio-range-cellsSimon Horman1-1/+0
Commit a1bc260bb5f5d9 ("gpio: clean up gpio-ranges documentation") declares the above property deprecated. That was more than 2 years ago. Remove it, so it doesn't get copied around needlessly. Based on similar work for the r8a7791 and r8a7794 by Wolfram Sang. Cc: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Reported-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
2015-12-07ARM: shmobile: r8a7791: add EtherAVB DT supportSergei Shtylyov1-0/+12
Define the generic R8A7791 part of the EtherAVB device node. Based on the commit f25d6b977240 ("ARM: shmobile: r8a7790: add EtherAVB DT support"). Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-12-07ARM: shmobile: r8a7791: add EtherAVB clockSergei Shtylyov1-4/+6
Add the EtherAVB clock to the R8A7791 device tree. Based on the commit 63d2d750c902 ("ARM: shmobile: r8a7790: add EtherAVB clocks"). Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-12-01ARM: shmobile: sh73a0: Add MSIOF device nodesGeert Uytterhoeven1-0/+44
The sh73a0 has 4 MSIOF devices, located in the A3SP power area. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-12-01ARM: shmobile: sh73a0: Add MSIOF clocksGeert Uytterhoeven1-12/+16
The 4 MSIOF clocks are MSTP clocks, and children of the SUB clock. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-11-25ARM: shmobile: sh73a0 dtsi: Add L2 cache-controller nodeGeert Uytterhoeven1-0/+14
Add the missing L2 cache-controller node, and link the CPU nodes to it. This will allow migration to the generic l2c OF initialization. The L2 cache is an ARM L2C-310 (r3p1), of size 512 KiB (64 KiB x 8 ways). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-11-25ARM: shmobile: r8a7740 dtsi: Add L2 cache-controller nodeGeert Uytterhoeven1-0/+13
Add the missing L2 cache-controller node, and link the CPU node to it. This will allow migration to the generic l2c OF initialization. The L2 cache is an ARM L2C-310 (r3p1-150rel0), of size 256 KiB (32 KiB x 8 ways). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-11-25ARM: shmobile: alt: Correct ether pfcSimon Horman1-3/+6
22b160713cb6 ("ARM: shmobile: alt: Add pfc pins to DT") introduced pfc pins to the alt device tree but did not reference them. This patch fixes ether pfc by: * Referencing ether pins * Adding and referencing phy1 pins * Removing ether b pins. These are not used in the configuration of the alt board used for testing and empirically their presence prevents ethernet from functioning correctly in that environment. Reported-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-11-25ARM: shmobile: alt: Correct scif2 pfcSimon Horman1-0/+3
22b160713cb6 ("ARM: shmobile: alt: Add pfc pins to DT") introduced pfc pins to the alt device tree but did not reference them. This patch fixes scif2 pfc by adding references to the scif2 pins. Reported-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-11-25ARM: shmobile: silk: Move SPI FLASH partitions to subnodeGeert Uytterhoeven1-15/+18
As of commits 5cfdedb7b9a0fe38 ("mtd: ofpart: move ofpart partitions to a dedicated dt node") and fe2585e9c29a650a ("doc: dt: mtd: support partitions in a special 'partitions' subnode"), having partitions as direct subnodes of an mtd device is discouraged. Hence move the SPI FLASH partitions to a "partitions" subnode. Based on similar work for the koelsch board by Geert Uytterhoeven. Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-11-25ARM: shmobile: lager: Move SPI FLASH partitions to subnodeGeert Uytterhoeven1-15/+18
As of commits 5cfdedb7b9a0fe38 ("mtd: ofpart: move ofpart partitions to a dedicated dt node") and fe2585e9c29a650a ("doc: dt: mtd: support partitions in a special 'partitions' subnode"), having partitions as direct subnodes of an mtd device is discouraged. Hence move the SPI FLASH partitions to a "partitions" subnode. Based on similar work for the koelsch board by Geert Uytterhoeven. Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-11-25ARM: shmobile: porter: Move SPI FLASH partitions to subnodeGeert Uytterhoeven1-15/+18
As of commits 5cfdedb7b9a0fe38 ("mtd: ofpart: move ofpart partitions to a dedicated dt node") and fe2585e9c29a650a ("doc: dt: mtd: support partitions in a special 'partitions' subnode"), having partitions as direct subnodes of an mtd device is discouraged. Hence move the SPI FLASH partitions to a "partitions" subnode. Based on similar work for the koelsch board by Geert Uytterhoeven. Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-11-25ARM: shmobile: bockw: Move SPI FLASH partition to subnodeGeert Uytterhoeven1-5/+8
As of commits 5cfdedb7b9a0fe38 ("mtd: ofpart: move ofpart partitions to a dedicated dt node") and fe2585e9c29a650a ("doc: dt: mtd: support partitions in a special 'partitions' subnode"), having partitions as direct subnodes of an mtd device is discouraged. Hence move the SPI FLASH partition to a "partitions" subnode. Based on similar work for the koelsch board by Geert Uytterhoeven. Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-11-25ARM: shmobile: r8a7791: koelsch: Fix pinmux for HDMILaurent Pinchart1-1/+1
The signals output by the DU to the HDMI transmitter use full 24-bit RGB. Make sure all pins are properly muxed. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-11-25ARM: shmobile: r8a7794: remove deprecated #gpio-range-cells from dtsiWolfram Sang1-1/+0
Commit a1bc260bb5f5d9 ("gpio: clean up gpio-ranges documentation") declares the above property deprecated. That was more than 2 years ago. Remove it, so it doesn't get copied around needlessly. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-11-25ARM: shmobile: r8a7791: remove deprecated #gpio-range-cells from dtsiWolfram Sang1-1/+0
Commit a1bc260bb5f5d9 ("gpio: clean up gpio-ranges documentation") declares the above property deprecated. That was more than 2 years ago. Remove it, so it doesn't get copied around needlessly. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-11-25ARM: shmobile: r8a7793: Add DU node to device treeLaurent Pinchart1-0/+30
Add the DU device with a disabled state. Boards that want to enable the DU need to specify the output topology. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-11-24ARM: shmobile: r8a7794: alt: Enable PFC DU for the VGA portMagnus Damm1-0/+7
Tie in r8a7794 PFC DU support to the VGA port on the r8a7794 ALT board. Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-11-24ARM: shmobile: bockw dts: define sdhi0 pins with pull-upsUlrich Hecht1-3/+7
Ensures that the pull-ups for pins SD0_CD and SD0_WP are enabled. This is one of two features from the DT reference platform that are still missing in MP. Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-11-24ARM: shmobile: r8a7790: switch console back to scif0Ulrich Hecht1-7/+7
The boot loader uses scif0, and so must we if we want earlycon to work. Partially reverts 7c0558941 ("ARM: shmobile: r8a7790: switch from scif to scifa"). Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-11-24Merge tag 'v4.4-rc1' into HEADSimon Horman1953-26273/+52381
Linux 4.4-rc1
2015-11-18ARM: shmobile: alt: add VIN0, ADV7180 DT supportUlrich Hecht1-0/+34
Adds the device board-dependent part of the VIN0 device and its ADV7180 video decoder on I2C1, and the interconnection between them. Based on silk patch by Sergei Shtylyov. Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-11-18ARM: shmobile: alt: add I2C1 DT supportUlrich Hecht1-0/+13
Defines the board-dependent part of the I2C1 device. Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-11-18ARM: shmobile: alt: Add pfc pins to DTSimon Horman1-0/+17
PFC is already enabled on the r8a7794. This adds pins for devices already enabled in DT on the r8a7794 based alt board. Based on work by Mitsuhiro Kimura and Hisashi Nakamura. Cc: Mitsuhiro Kimura <mitsuhiro.kimura.kc@renesas.com> Cc: Hisashi Nakamura <hisashi.nakamura.ak@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
2015-11-17ARM: shmobile: r8a7794: Use SoC specific binding for rcar-dmac nodesSimon Horman1-2/+2
Use the new SoC specific binding for rcar-dmac and the generic binding as a fall-back in the r8a7794 device tree. In general Renesas hardware is not documented to the extent where the relationship between IP blocks on different SoCs can be assumed although they may appear to operate the same way. Furthermore the documentation typically does not specify a version for individual IP blocks. For these reasons a convention of using the SoC name in place of a version and providing SoC-specific compat strings has been adopted. Although not universally liked this convention is used in the bindings for most drivers for Renesas hardware. The purpose of this patch is to update the Renesas R-Car DMA Controller nodes to follow this convention. Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-11-17ARM: shmobile: r8a7793: Use SoC specific binding for rcar-dmac nodesSimon Horman1-2/+2
Use the new SoC specific binding for rcar-dmac and the generic binding as a fall-back in the r8a7793 device tree. In general Renesas hardware is not documented to the extent where the relationship between IP blocks on different SoCs can be assumed although they may appear to operate the same way. Furthermore the documentation typically does not specify a version for individual IP blocks. For these reasons a convention of using the SoC name in place of a version and providing SoC-specific compat strings has been adopted. Although not universally liked this convention is used in the bindings for most drivers for Renesas hardware. The purpose of this patch is to update the Renesas R-Car DMA Controller nodes to follow this convention. Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-11-17ARM: shmobile: r8a7791: Use SoC specific binding for rcar-dmac nodesSimon Horman1-4/+4
Use the new SoC specific binding for rcar-dmac and the generic binding as a fall-back in the r8a7791 device tree. In general Renesas hardware is not documented to the extent where the relationship between IP blocks on different SoCs can be assumed although they may appear to operate the same way. Furthermore the documentation typically does not specify a version for individual IP blocks. For these reasons a convention of using the SoC name in place of a version and providing SoC-specific compat strings has been adopted. Although not universally liked this convention is used in the bindings for most drivers for Renesas hardware. The purpose of this patch is to update the Renesas R-Car DMA Controller nodes to follow this convention. Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-11-17ARM: shmobile: r8a7790: Use SoC specific binding for rcar-dmac nodesSimon Horman1-4/+4
Use the new SoC specific binding for rcar-dmac and the generic binding as a fall-back in the r8a7790 device tree. In general Renesas hardware is not documented to the extent where the relationship between IP blocks on different SoCs can be assumed although they may appear to operate the same way. Furthermore the documentation typically does not specify a version for individual IP blocks. For these reasons a convention of using the SoC name in place of a version and providing SoC-specific compat strings has been adopted. Although not universally liked this convention is used in the bindings for most drivers for Renesas hardware. The purpose of this patch is to update the Renesas R-Car DMA Controller nodes to follow this convention. Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-11-17ARM: shmobile: r8a7793: Add GPIO nodes to device treeMagnus Damm1-3/+118
Add r8a7793 GPIO device nodes that are assumed to be identical to r8a7791. This matches the data sheet for GPIO and MSTP bits. Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-11-17ARM: shmobile: r8a7794: alt: Enable VGA portMagnus Damm1-0/+61
Enable the DU device and the VGA port available on the r8a7794 ALT board. The VGA portion of the ALT board is somewhat similar to the Lager board but in case of ALT the DU1 pins are used and the X2 clock has a reduced frequency. This patch does not include any pinctrl (PFC) settings due to lack of PFC DT integration on r8a7794. At this point the default state of the boot loader is enough to keep the VGA port working without changing any pinctrl settings. Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-11-17ARM: shmobile: r8a7794: Add DU node to device treeLaurent Pinchart1-0/+28
Add the DU device with a disabled state. Boards that want to enable the DU need to specify the output topology. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-11-17ARM: shmobile: r8a7794: Add DU0 clockLaurent Pinchart1-3/+4
The DU0 clock is an MSTP clock, child of the CPG ZX clock. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-11-15Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds1-6/+0
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf updates from Thomas Gleixner: "Mostly updates to the perf tool plus two fixes to the kernel core code: - Handle tracepoint filters correctly for inherited events (Peter Zijlstra) - Prevent a deadlock in perf_lock_task_context (Paul McKenney) - Add missing newlines to some pr_err() calls (Arnaldo Carvalho de Melo) - Print full source file paths when using 'perf annotate --print-line --full-paths' (Michael Petlan) - Fix 'perf probe -d' when just one out of uprobes and kprobes is enabled (Wang Nan) - Add compiler.h to list.h to fix 'make perf-tar-src-pkg' generated tarballs, i.e. out of tree building (Arnaldo Carvalho de Melo) - Add the llvm-src-base.c and llvm-src-kbuild.c files, generated by the 'perf test' LLVM entries, when running it in-tree, to .gitignore (Yunlong Song) - libbpf error reporting improvements, using a strerror interface to more precisely tell the user about problems with the provided scriptlet, be it in C or as a ready made object file (Wang Nan) - Do not be case sensitive when searching for matching 'perf test' entries (Arnaldo Carvalho de Melo) - Inform the user about objdump failures in 'perf annotate' (Andi Kleen) - Improve the LLVM 'perf test' entry, introduce a new ones for BPF and kbuild tests to check the environment used by clang to compile .c scriptlets (Wang Nan)" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (32 commits) perf/x86/intel/rapl: Remove the unused RAPL_EVENT_DESC() macro tools include: Add compiler.h to list.h perf probe: Verify parameters in two functions perf session: Add missing newlines to some pr_err() calls perf annotate: Support full source file paths for srcline fix perf test: Add llvm-src-base.c and llvm-src-kbuild.c to .gitignore perf: Fix inherited events vs. tracepoint filters perf: Disable IRQs across RCU RS CS that acquires scheduler lock perf test: Do not be case sensitive when searching for matching tests perf test: Add 'perf test BPF' perf test: Enhance the LLVM tests: add kbuild test perf test: Enhance the LLVM test: update basic BPF test program perf bpf: Improve BPF related error messages perf tools: Make fetch_kernel_version() publicly available bpf tools: Add new API bpf_object__get_kversion() bpf tools: Improve libbpf error reporting perf probe: Cleanup find_perf_probe_point_from_map to reduce redundancy perf annotate: Inform the user about objdump failures in --stdio perf stat: Make stat options global perf sched latency: Fix thread pid reuse issue ...
2015-11-15Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds9-16/+73
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Thomas Gleixner: "A couple of fixes and updates related to x86: - Fix the W+X check regression on XEN - The real fix for the low identity map trainwreck - Probe legacy PIC early instead of unconditionally allocating legacy irqs - Add cpu verification to long mode entry - Adjust the cache topology to AMD Fam17H systems - Let Merrifield use the TSC across S3" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/cpu: Call verify_cpu() after having entered long mode too x86/setup: Fix low identity map for >= 2GB kernel range x86/mm: Skip the hypervisor range when walking PGD x86/AMD: Fix last level cache topology for AMD Fam17h systems x86/irq: Probe for PIC presence before allocating descs for legacy IRQs x86/cpu/intel: Enable X86_FEATURE_NONSTOP_TSC_S3 for Merrifield
2015-11-15Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds147-746/+4472
Pull MIPS updates from Ralf Baechle: "These are the highlists of the main MIPS pull request for 4.4: - Add latencytop support - Support appended DTBs - VDSO support and initially use it for gettimeofday. - Drop the .MIPS.abiflags and ELF NOTE sections from vmlinux - Support for the 5KE, an internal test core. - Switch all MIPS platfroms to libata drivers. - Improved support, cleanups for ralink and Lantiq platforms. - Support for the new xilfpga platform. - A number of DTB improvments for BMIPS. - Improved support for CM and CPS. - Minor JZ4740 and BCM47xx enhancements" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (120 commits) MIPS: idle: add case for CPU_5KE MIPS: Octeon: Support APPENDED_DTB MIPS: vmlinux: create a section for appended DTB MIPS: Clean up compat_siginfo_t MIPS: Fix PAGE_MASK definition MIPS: BMIPS: Enable GZIP ramdisk and timed printks MIPS: Add xilfpga defconfig MIPS: xilfpga: Add mipsfpga platform code MIPS: xilfpga: Add xilfpga device tree files. dt-bindings: MIPS: Document xilfpga bindings and boot style MIPS: Make MIPS_CMDLINE_DTB default MIPS: Make the kernel arguments from dtb available MIPS: Use USE_OF as the guard for appended dtb MIPS: BCM63XX: Use pr_* instead of printk MIPS: Loongson: Cleanup CONFIG_LOONGSON_SUSPEND. MIPS: lantiq: Disable xbar fpi burst mode MIPS: lantiq: Force the crossbar to big endian MIPS: lantiq: Initialize the USB core on boot MIPS: lantiq: Return correct value for fpi clock on ar9 MIPS: ralink: Add missing clock on rt305x ...
2015-11-14Merge tag 'arc-4.4-rc1-part2' of ↵Linus Torvalds7-55/+73
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc Pull ARC fixes from Vineet Gupta: "Found a couple of brown paper bag bugs with the prev pull request (including a SMP build breakage report from Guenter). Since these are urgent I also decided to send over a bunch of other pending fixes which could have otherwise waited an rc or two. Summary: - A bunch of brown paper bag bugs (MAINTAINERS list email, SMP build failure) - cpu_relax() now compiler barrier for UP as well - handling of userspace Bus Errors for ARCompact builds" * tag 'arc-4.4-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: ARC: Fix silly typo in MAINTAINERS file ARC: cpu_relax() to be compiler barrier even for UP ARC: use ASL assembler mnemonic ARC: [arcompact] Handle bus error from userspace as Interrupt not exception ARC: remove extraneous header include ARCv2: lib: memcpy: use local symbols
2015-11-14ARC: cpu_relax() to be compiler barrier even for UPVineet Gupta1-4/+0
cpu_relax() on ARC has been barrier only for SMP (and no-op for UP). Per recent discussions, it is safer to make it a compiler barrier unconditionally. Link: http://lkml.kernel.org/r/53A7D3AA.9020100@synopsys.com Acked-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2015-11-14ARC: use ASL assembler mnemonicVineet Gupta1-3/+3
ARCompact and ARCv2 only have ASL, while binutils used to support LSL as a alias mnemonic. Newer binutils (upstream) don't want to do that so replace it. Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2015-11-14ARC: [arcompact] Handle bus error from userspace as Interrupt not exceptionVineet Gupta3-21/+44
Bus errors from userspace on ARCompact based cores are handled by core as a high priority L2 interrupt but current code treated it as interrupt Handling an interrupt like exception is certainly not going to go unnoticed. (and it worked so far as we never saw a Bus error from userspace until IPPK guys tested a DDR controller with ECC error detection etc hence needed to explicitly trigger/handle such errors) - So move mem_service exception handler from common code into ARCv2 code. - In ARCompact code, define mem_service as L2 interrupt handler which just drops down to pure kernel mode and goes of to enqueue SIGBUS Reported-by: Nelson Pereira <npereira@synopsys.com> Tested-by: Ana Martins <amartins@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2015-11-14ARC: remove extraneous header includeVineet Gupta1-1/+0
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2015-11-13ARM: shmobile: gose: Add QSPI device to DTSimon Horman1-0/+43
Enable the QSPI controller in the gose device tree. Based on similar work for the silk board by Vladimir Barinov and Sergei Shtylyov. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
2015-11-13ARM: shmobile: r8a7793: Add QSPI device to DTSimon Horman1-0/+26
Instantiate the QSPI controller in the r8a7793 device tree. Based on similar work for the r8a7794 by Hisashi Nakamura and Sergei Shtylyov. Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-11-13ARM: shmobile: r8a7793: Add DMAC devices to DTSimon Horman1-0/+72
Instantiate the two system DMA controllers in the r8a7793 device tree. Based on similar work for the r8a7793 by Laurent Pinchart. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2015-11-13Merge tag 'arm64-fixes' of ↵Linus Torvalds14-33/+54
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes and clean-ups from Catalin Marinas: "Here's a second pull request for this merging window with some fixes/clean-ups: - __cmpxchg_double*() return type fix to avoid truncation of a long to int and subsequent logical "not" in cmpxchg_double() misinterpreting the operation success/failure - BPF fixes for mod and div by zero - Fix compilation with STRICT_MM_TYPECHECKS enabled - VDSO build fix without libgcov - Some static and __maybe_unused annotations - Kconfig clean-up (FRAME_POINTER) - defconfig update for CRYPTO_CRC32_ARM64" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: suspend: make hw_breakpoint_restore static arm64: mmu: make split_pud and fixup_executable static arm64: smp: make of_parse_and_init_cpus static arm64: use linux/types.h in kvm.h arm64: build vdso without libgcov arm64: mark cpus_have_hwcap as __maybe_unused arm64: remove redundant FRAME_POINTER kconfig option and force to select it arm64: fix R/O permissions of FDT mapping arm64: fix STRICT_MM_TYPECHECKS issue in PTE_CONT manipulation arm64: bpf: fix mod-by-zero case arm64: bpf: fix div-by-zero case arm64: Enable CRYPTO_CRC32_ARM64 in defconfig arm64: cmpxchg_dbl: fix return value type
2015-11-13Merge tag 'for-4.4' of git://git.osdn.jp/gitroot/uclinux-h8/linuxLinus Torvalds11-30/+29
Pull h8300 updates from Yoshinori Sato: "Some bug fixes" * tag 'for-4.4' of git://git.osdn.jp/gitroot/uclinux-h8/linux: h8300: enable CLKSRC_OF h8300: Don't set CROSS_COMPILE unconditionally asm-generic: {get,put}_user ptr argument evaluate only 1 time h8300: bit io fix h8300: zImage fix h8300: register address fix h8300: Fix alignment for .data h8300: unaligned divcr register support.
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-27 11:18:50 +0300