summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)AuthorFilesLines
2014-11-05Merge tag 'iio-for-3.19a' of ↵Greg Kroah-Hartman4-4/+8
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next Jonathan writes: First round of new drivers, features and cleanups for IIO in the 3.19 cycle. New drivers / supported parts * rockchip - rk3066-tsadc variant * si7020 humidity and temperature sensor * mcp320x - add mcp3001, mcp3002, mcp3004, mcp3008, mcp3201, mcp3202 * bmp280 pressure and temperature sensor * Qualcomm SPMI PMIC current ADC driver * Exynos_adc - support exynos7 New features * vf610-adc - add temperature sensor support * Documentation of current attributes, scaled pressure, offset and scaled humidity, RGBC intensity gain factor and scale applied to differential voltage channels. * Bring iio_event_monitor up to date with newer modifiers. * Add of_xlate function to allow for complex channel mappings from the device tree. * Add -g parameter to generic_buffer example to allow for devices with directly fed (no trigger) buffers. * Move exynos driver over to syscon for PMU register access. Cleanups, fixes for new drivers * lis3l02dq drop an unneeded else. * st sensors - renam st_sensors to st_sensor_settings (for clarity) * st sensors - drop an unused parameter from all the probe utility functions. * vf610 better error handling and tidy up. * si7020 - cleanups following merge * as3935 - drop some unnecessary semicolons. * bmp280 - fix the pressure calculation.
2014-11-05ARM: dts: exynos: Add sysreg phandle to ADC nodeNaveen Krishna Chatradhi4-4/+8
Instead of using the ADC_PHY register base address, use sysreg phandle in ADC node to control ADC_PHY configuration register. This patch adds syscon node for Exynos3250, Exynos4x12, Exynos5250, and Exynos5420, Exynos5800. Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com> To: linux-samsung-soc@vger.kernel.org Acked-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-11-02Merge branch 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-armLinus Torvalds5-9/+23
Pull ARM fixes from Russell King: - add the new bpf syscall to ARM. - drop a redundant return statement in __iommu_alloc_remap() - fix a performance issue noticed by Thomas Petazzoni with kmap_atomic(). - fix an issue with the L2 cache OF parsing code which caused it to incorrectly print warnings on each boot, and make the warning text more consistent with the rest of the code * 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: ARM: 8180/1: mm: implement no-highmem fast path in kmap_atomic_pfn() ARM: 8183/1: l2c: Improve l2c310_of_parse() error message ARM: 8181/1: Drop extra return statement ARM: 8182/1: l2c: Make l2x0_cache_size_of_parse() return 'int' ARM: enable bpf syscall
2014-11-02Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds2-16/+45
Pull kvm fixes from Paolo Bonzini: "A small set of x86 fixes. The most serious is an SRCU lockdep fix. A bit late - needed some time to test the SRCU fix, which only came in on Friday" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: vmx: defer load of APIC access page address during reset KVM: nVMX: Disable preemption while reading from shadow VMCS KVM: x86: Fix far-jump to non-canonical check KVM: emulator: fix execution close to the segment limit KVM: emulator: fix error code for __linearize
2014-11-02KVM: vmx: defer load of APIC access page address during resetPaolo Bonzini1-1/+1
Most call paths to vmx_vcpu_reset do not hold the SRCU lock. Defer loading the APIC access page to the next vmentry. This avoids the following lockdep splat: [ INFO: suspicious RCU usage. ] 3.18.0-rc2-test2+ #70 Not tainted ------------------------------- include/linux/kvm_host.h:474 suspicious rcu_dereference_check() usage! other info that might help us debug this: rcu_scheduler_active = 1, debug_locks = 0 1 lock held by qemu-system-x86/2371: #0: (&vcpu->mutex){+.+...}, at: [<ffffffffa037d800>] vcpu_load+0x20/0xd0 [kvm] stack backtrace: CPU: 4 PID: 2371 Comm: qemu-system-x86 Not tainted 3.18.0-rc2-test2+ #70 Hardware name: Dell Inc. OptiPlex 9010/0M9KCM, BIOS A12 01/10/2013 0000000000000001 ffff880209983ca8 ffffffff816f514f 0000000000000000 ffff8802099b8990 ffff880209983cd8 ffffffff810bd687 00000000000fee00 ffff880208a2c000 ffff880208a10000 ffff88020ef50040 ffff880209983d08 Call Trace: [<ffffffff816f514f>] dump_stack+0x4e/0x71 [<ffffffff810bd687>] lockdep_rcu_suspicious+0xe7/0x120 [<ffffffffa037d055>] gfn_to_memslot+0xd5/0xe0 [kvm] [<ffffffffa03807d3>] __gfn_to_pfn+0x33/0x60 [kvm] [<ffffffffa0380885>] gfn_to_page+0x25/0x90 [kvm] [<ffffffffa038aeec>] kvm_vcpu_reload_apic_access_page+0x3c/0x80 [kvm] [<ffffffffa08f0a9c>] vmx_vcpu_reset+0x20c/0x460 [kvm_intel] [<ffffffffa039ab8e>] kvm_vcpu_reset+0x15e/0x1b0 [kvm] [<ffffffffa039ac0c>] kvm_arch_vcpu_setup+0x2c/0x50 [kvm] [<ffffffffa037f7e0>] kvm_vm_ioctl+0x1d0/0x780 [kvm] [<ffffffff810bc664>] ? __lock_is_held+0x54/0x80 [<ffffffff812231f0>] do_vfs_ioctl+0x300/0x520 [<ffffffff8122ee45>] ? __fget+0x5/0x250 [<ffffffff8122f0fa>] ? __fget_light+0x2a/0xe0 [<ffffffff81223491>] SyS_ioctl+0x81/0xa0 [<ffffffff816fed6d>] system_call_fastpath+0x16/0x1b Reported-by: Takashi Iwai <tiwai@suse.de> Reported-by: Alexei Starovoitov <alexei.starovoitov@gmail.com> Reviewed-by: Wanpeng Li <wanpeng.li@linux.intel.com> Tested-by: Wanpeng Li <wanpeng.li@linux.intel.com> Fixes: 38b9917350cb2946e368ba684cfc33d1672f104e Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-11-02KVM: nVMX: Disable preemption while reading from shadow VMCSJan Kiszka1-0/+4
In order to access the shadow VMCS, we need to load it. At this point, vmx->loaded_vmcs->vmcs and the actually loaded one start to differ. If we now get preempted by Linux, vmx_vcpu_put and, on return, the vmx_vcpu_load will work against the wrong vmcs. That can cause copy_shadow_to_vmcs12 to corrupt the vmcs12 state. Fix the issue by disabling preemption during the copy operation. copy_vmcs12_to_shadow is safe from this issue as it is executed by vmx_vcpu_run when preemption is already disabled before vmentry. This bug is exposed by running Jailhouse within KVM on CPUs with shadow VMCS support. Jailhouse never expects an interrupt pending vmexit, but the bug can cause it if, after copy_shadow_to_vmcs12 is preempted, the active VMCS happens to have the virtual interrupt pending flag set in the CPU-based execution controls. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-11-02KVM: x86: Fix far-jump to non-canonical checkNadav Amit1-3/+5
Commit d1442d85cc30 ("KVM: x86: Handle errors when RIP is set during far jumps") introduced a bug that caused the fix to be incomplete. Due to incorrect evaluation, far jump to segment with L bit cleared (i.e., 32-bit segment) and RIP with any of the high bits set (i.e, RIP[63:32] != 0) set may not trigger #GP. As we know, this imposes a security problem. In addition, the condition for two warnings was incorrect. Fixes: d1442d85cc30ea75f7d399474ca738e0bc96f715 Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Nadav Amit <namit@cs.technion.ac.il> [Add #ifdef CONFIG_X86_64 to avoid complaints of undefined behavior. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-11-01x86_64, entry: Fix out of bounds read on sysenterAndy Lutomirski1-1/+1
Rusty noticed a Really Bad Bug (tm) in my NT fix. The entry code reads out of bounds, causing the NT fix to be unreliable. But, and this is much, much worse, if your stack is somehow just below the top of the direct map (or a hole), you read out of bounds and crash. Excerpt from the crash: [ 1.129513] RSP: 0018:ffff88001da4bf88 EFLAGS: 00010296 2b:* f7 84 24 90 00 00 00 testl $0x4000,0x90(%rsp) That read is deterministically above the top of the stack. I thought I even single-stepped through this code when I wrote it to check the offset, but I clearly screwed it up. Fixes: 8c7aa698baca ("x86_64, entry: Filter RFLAGS.NT on entry from userspace") Reported-by: Rusty Russell <rusty@ozlabs.org> Cc: stable@vger.kernel.org Signed-off-by: Andy Lutomirski <luto@amacapital.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-11-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds2-3/+2
Pull networking fixes from David Miller: "A bit has accumulated, but it's been a week or so since my last batch of post-merge-window fixes, so... 1) Missing module license in netfilter reject module, from Pablo. Lots of people ran into this. 2) Off by one in mac80211 baserate calculation, from Karl Beldan. 3) Fix incorrect return value from ax88179_178a driver's set_mac_addr op, which broke use of it with bonding. From Ian Morgan. 4) Checking of skb_gso_segment()'s return value was not all encompassing, it can return an SKB pointer, a pointer error, or NULL. Fix from Florian Westphal. This is crummy, and longer term will be fixed to just return error pointers or a real SKB. 6) Encapsulation offloads not being handled by skb_gso_transport_seglen(). From Florian Westphal. 7) Fix deadlock in TIPC stack, from Ying Xue. 8) Fix performance regression from using rhashtable for netlink sockets. The problem was the synchronize_net() invoked for every socket destroy. From Thomas Graf. 9) Fix bug in eBPF verifier, and remove the strong dependency of BPF on NET. From Alexei Starovoitov. 10) In qdisc_create(), use the correct interface to allocate ->cpu_bstats, otherwise the u64_stats_sync member isn't initialized properly. From Sabrina Dubroca. 11) Off by one in ip_set_nfnl_get_byindex(), from Dan Carpenter. 12) nf_tables_newchain() was erroneously expecting error pointers from netdev_alloc_pcpu_stats(). It only returna a valid pointer or NULL. From Sabrina Dubroca. 13) Fix use-after-free in _decode_session6(), from Li RongQing. 14) When we set the TX flow hash on a socket, we mistakenly do so before we've nailed down the final source port. Move the setting deeper to fix this. From Sathya Perla. 15) NAPI budget accounting in amd-xgbe driver was counting descriptors instead of full packets, fix from Thomas Lendacky. 16) Fix total_data_buflen calculation in hyperv driver, from Haiyang Zhang. 17) Fix bcma driver build with OF_ADDRESS disabled, from Hauke Mehrtens. 18) Fix mis-use of per-cpu memory in TCP md5 code. The problem is that something that ends up being vmalloc memory can't be passed to the crypto hash routines via scatter-gather lists. From Eric Dumazet. 19) Fix regression in promiscuous mode enabling in cdc-ether, from Olivier Blin. 20) Bucket eviction and frag entry killing can race with eachother, causing an unlink of the object from the wrong list. Fix from Nikolay Aleksandrov. 21) Missing initialization of spinlock in cxgb4 driver, from Anish Bhatt. 22) Do not cache ipv4 routing failures, otherwise if the sysctl for forwarding is subsequently enabled this won't be seen. From Nicolas Cavallari" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (131 commits) drivers: net: cpsw: Support ALLMULTI and fix IFF_PROMISC in switch mode drivers: net: cpsw: Fix broken loop condition in switch mode net: ethtool: Return -EOPNOTSUPP if user space tries to read EEPROM with lengh 0 stmmac: pci: set default of the filter bins net: smc91x: Fix gpios for device tree based booting mpls: Allow mpls_gso to be built as module mpls: Fix mpls_gso handler. r8152: stop submitting intr for -EPROTO netfilter: nft_reject_bridge: restrict reject to prerouting and input netfilter: nft_reject_bridge: don't use IP stack to reject traffic netfilter: nf_reject_ipv6: split nf_send_reset6() in smaller functions netfilter: nf_reject_ipv4: split nf_send_reset() in smaller functions netfilter: nf_tables_bridge: update hook_mask to allow {pre,post}routing drivers/net: macvtap and tun depend on INET drivers/net, ipv6: Select IPv6 fragment idents for virtio UFO packets drivers/net: Disable UFO through virtio net: skb_fclone_busy() needs to detect orphaned skb gre: Use inner mac length when computing tunnel length mlx4: Avoid leaking steering rules on flow creation error flow net/mlx4_en: Don't attempt to TX offload the outer UDP checksum for VXLAN ...
2014-11-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparcLinus Torvalds3-4/+5
Pull sparc update from David Miller: "Two changes: 1) It makes no sense to execute a VTOC partition table request in the Sun virtual block device driver and fail to load if it doesn't succeed because a) we don't use the result at all and b) it won't succeed if there is an EFI partition on the disk, for example. We read the partition table via the normal means in the block layer anyways, so this is really completely useless, so just remove it. From Dwight Engen. 2) Hook up new bpf system call" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: sunvdc: don't call VD_OP_GET_VTOC sparc: Hook up bpf system call.
2014-11-01Merge tag 'microblaze-3.18-rc3' of git://git.monstr.eu/linux-2.6-microblazeLinus Torvalds5-3/+14
Pull Microblaze updates from Michal Simek: - wire-up new bpf syscall - fix PCI bug - fix Kconfig warning * tag 'microblaze-3.18-rc3' of git://git.monstr.eu/linux-2.6-microblaze: microblaze: Wire up bpf syscall microblaze: Fix IO space breakage after of_pci_range_to_resource() change microblaze: Fix missing NR_CPUS in menuconfig
2014-11-01Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds12-29/+34
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar: "Fixes from all around the place: - hyper-V 32-bit PAE guest kernel fix - two IRQ allocation fixes on certain x86 boards - intel-mid boot crash fix - intel-quark quirk - /proc/interrupts duplicate irq chip name fix - cma boot crash fix - syscall audit fix - boot crash fix with certain TSC configurations (seen on Qemu) - smpboot.c build warning fix" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, pageattr: Prevent overflow in slow_virt_to_phys() for X86_PAE ACPI, irq, x86: Return IRQ instead of GSI in mp_register_gsi() x86, intel-mid: Create IRQs for APB timers and RTC timers x86: Don't enable F00F workaround on Intel Quark processors x86/irq: Fix XT-PIC-XT-PIC in /proc/interrupts x86, cma: Reserve DMA contiguous area after initmem_init() i386/audit: stop scribbling on the stack frame x86, apic: Handle a bad TSC more gracefully x86: ACPI: Do not translate GSI number if IOAPIC is disabled x86/smpboot: Move data structure to its primary usage scope
2014-11-01Merge branch 'sched-urgent-for-linus' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fixes from Ingo Molnar: "Various scheduler fixes all over the place: three SCHED_DL fixes, three sched/numa fixes, two generic race fixes and a comment fix" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/dl: Fix preemption checks sched: Update comments for CLONE_NEWNS sched: stop the unbound recursion in preempt_schedule_context() sched/fair: Fix division by zero sysctl_numa_balancing_scan_size sched/fair: Care divide error in update_task_scan_period() sched/numa: Fix unsafe get_task_struct() in task_numa_assign() sched/deadline: Fix races between rt_mutex_setprio() and dl_task_timer() sched/deadline: Don't replenish from a !SCHED_DEADLINE entity sched: Fix race between task_group and sched_task_group
2014-11-01Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds8-203/+14
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Ingo Molnar: "Mostly tooling fixes, plus on the kernel side: - a revert for a newly introduced PMU driver which isn't complete yet and where we ran out of time with fixes (to be tried again in v3.19) - this makes up for a large chunk of the diffstat. - compilation warning fixes - a printk message fix - event_idx usage fixes/cleanups" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf probe: Trivial typo fix for --demangle perf tools: Fix report -F dso_from for data without branch info perf tools: Fix report -F dso_to for data without branch info perf tools: Fix report -F symbol_from for data without branch info perf tools: Fix report -F symbol_to for data without branch info perf tools: Fix report -F mispredict for data without branch info perf tools: Fix report -F in_tx for data without branch info perf tools: Fix report -F abort for data without branch info perf tools: Make CPUINFO_PROC an array to support different kernel versions perf callchain: Use global caching provided by libunwind perf/x86/intel: Revert incomplete and undocumented Broadwell client support perf/x86: Fix compile warnings for intel_uncore perf: Fix typos in sample code in the perf_event.h header perf: Fix and clean up initialization of pmu::event_idx perf: Fix bogus kernel printk perf diff: Add missing hists__init() call at tool start
2014-10-31net: smc91x: Fix gpios for device tree based bootingTony Lindgren2-3/+2
With legacy booting, the platform init code was taking care of the configuring of GPIOs. With device tree based booting, things may or may not work depending what bootloader has configured or if the legacy platform code gets called. Let's add support for the pwrdn and reset GPIOs to the smc91x driver to fix the issues of smc91x not working properly when booted in device tree mode. And let's change n900 to use these settings as some versions of the bootloader do not configure things properly causing errors. Reported-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-30Merge branch 'akpm' (incoming from Andrew Morton)Linus Torvalds1-3/+3
Merge misc fixes from Andrew Morton: "21 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (21 commits) mm/balloon_compaction: fix deflation when compaction is disabled sh: fix sh770x SCIF memory regions zram: avoid NULL pointer access in concurrent situation mm/slab_common: don't check for duplicate cache names ocfs2: fix d_splice_alias() return code checking mm: rmap: split out page_remove_file_rmap() mm: memcontrol: fix missed end-writeback page accounting mm: page-writeback: inline account_page_dirtied() into single caller lib/bitmap.c: fix undefined shift in __bitmap_shift_{left|right}() drivers/rtc/rtc-bq32k.c: fix register value memory-hotplug: clear pgdat which is allocated by bootmem in try_offline_node() drivers/rtc/rtc-s3c.c: fix initialization failure without rtc source clock kernel/kmod: fix use-after-free of the sub_info structure drivers/rtc/rtc-pm8xxx.c: rework to support pm8941 rtc mm, thp: fix collapsing of hugepages on madvise drivers: of: add return value to of_reserved_mem_device_init() mm: free compound page with correct order gcov: add ARM64 to GCOV_PROFILE_ALL fsnotify: next_i is freed during fsnotify_unmount_inodes. mm/compaction.c: avoid premature range skip in isolate_migratepages_range ...
2014-10-30sh: fix sh770x SCIF memory regionsAndriy Skulysh1-3/+3
Resources scif1_resources & scif2_resources overlap. Actual SCIF region size is 0x10. This is regression from commit d850acf975be ("sh: Declare SCIF register base and IRQ as resources") Signed-off-by: Andriy Skulysh <askulysh@gmail.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-29Merge branch 'for-linus' of ↵Linus Torvalds9-11/+14
git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux Pull powerpc updates from Michael Ellerman: "There's some bug fixes or cleanups to facilitate fixes, a MAINTAINERS update, and a new syscall (bpf)" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux: powerpc/numa: ensure per-cpu NUMA mappings are correct on topology update powerpc/numa: use cached value of update->cpu in update_cpu_topology cxl: Fix PSL error due to duplicate segment table entries powerpc/mm: Use appropriate ESID mask in copro_calculate_slb() cxl: Refactor cxl_load_segment() and find_free_sste() cxl: Disable secondary hash in segment table Revert "powerpc/powernv: Fix endian bug in LPC bus debugfs accessors" powernv: Use _GLOBAL_TOC for opal wrappers powerpc: Wire up sys_bpf() syscall MAINTAINERS: nx-842 driver maintainer change powerpc/mm: Remove redundant #if case powerpc/mm: Fix build error with hugetlfs disabled
2014-10-29ARM: 8180/1: mm: implement no-highmem fast path in kmap_atomic_pfn()Thomas Petazzoni1-0/+3
Since CONFIG_HIGHMEM got enabled on ARMv5 Kirkwood, we have noticed a very significant drop in networking performance. The test were conducted on an OpenBlocks A7 board. Without this patch, the outgoing performance measured with iperf are: - highmem OFF, TSO OFF 544 Mbit/s - highmem OFF, TSO ON 942 Mbit/s - highmem ON, TSO OFF 306 Mbit/s - highmem ON, TSO ON 246 Mbit/s On this Kirkwood platform, the L2 cache is a Feroceon cache, and with this cache, all the range operations have to be done on virtual addresses and not physical addresses. Therefore, whenever CONFIG_HIGHMEM is enabled, the cache maintenance operations call kmap_atomic_pfn() and kunmap_atomic(). However, kmap_atomic_pfn() does not implement the same fast path for non-highmem pages as the one implemented in kmap_atomic(), and this is one of the reason for the performance drop. While this patch does not fully restore the performances, it clearly improves them a lot: without patch with patch - highmem ON, TSO OFF 306 Mbit/s 387 Mbit/s - highmem ON, TSO ON 246 Mbit/s 434 Mbit/s We're still far from the !CONFIG_HIGHMEM performances, but it does improve a bit the situation. Thanks a lot to Ezequiel Garcia and Gregory Clement for all the testing work around this topic. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-10-29ARM: 8183/1: l2c: Improve l2c310_of_parse() error messageFabio Estevam1-2/+2
Russell King suggested [1]: "I'd ask for one change. Please make all these messages start with "L2C-310 OF" not "PL310 OF:". The device is described in ARM documentation as a L2C-310 not PL310. (Also note the : is dropped too - most of the other messages don't have the : either.) The: "PL310 OF: cache setting yield illegal associativity PL310 OF: -1073346556 calculated, only 8 and 16 legal" message could also be changed to something like: "L2C-310 OF cache associativity %d invalid, only 8 or 16 permittedn" [1] http://www.spinics.net/lists/arm-kernel/msg372776.html Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-10-29ARM: 8181/1: Drop extra return statementLaura Abbott1-1/+0
Commit 513510ddba9650fc7da456eefeb0ead7632324f6 (common: dma-mapping: introduce common remapping functions) managed to end up with an extra return statement from the original patch. Drop it. Signed-off-by: Laura Abbott <lauraa@codeaurora.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-10-29KVM: emulator: fix execution close to the segment limitPaolo Bonzini1-10/+33
Emulation of code that is 14 bytes to the segment limit or closer (e.g. RIP = 0xFFFFFFF2 after reset) is broken because we try to read as many as 15 bytes from the beginning of the instruction, and __linearize fails when the passed (address, size) pair reaches out of the segment. To fix this, let __linearize return the maximum accessible size (clamped to 2^32-1) for usage in __do_insn_fetch_bytes, and avoid the limit check by passing zero for the desired size. For expand-down segments, __linearize is performing a redundant check. (u32)(addr.ea + size - 1) <= lim can only happen if addr.ea is close to 4GB; in this case, addr.ea + size - 1 will also fail the check against the upper bound of the segment (which is provided by the D/B bit). After eliminating the redundant check, it is simple to compute the *max_size for expand-down segments too. Now that the limit check is done in __do_insn_fetch_bytes, we want to inject a general protection fault there if size < op_size (like __linearize would have done), instead of just aborting. This fixes booting Tiano Core from emulated flash with EPT disabled. Cc: stable@vger.kernel.org Fixes: 719d5a9b2487e0562f178f61e323c3dc18a8b200 Reported-by: Borislav Petkov <bp@suse.de> Tested-by: Borislav Petkov <bp@suse.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-10-29KVM: emulator: fix error code for __linearizePaolo Bonzini1-2/+2
The error code for #GP and #SS is zero when the segment is used to access an operand or an instruction. It is only non-zero when a segment register is being loaded; for limit checks this means cases such as: * for #GP, when RIP is beyond the limit on a far call (before the first instruction is executed). We do not implement this check, but it would be in em_jmp_far/em_call_far. * for #SS, if the new stack overflows during an inter-privilege-level call to a non-conforming code segment. We do not implement stack switching at all. So use an error code of zero. Reviewed-by: Nadav Amit <namit@cs.technion.ac.il> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-10-29ARM: 8182/1: l2c: Make l2x0_cache_size_of_parse() return 'int'Fabio Estevam1-6/+16
Since commit f3354ab67476dc80 ("ARM: 8169/1: l2c: parse cache properties from ePAPR definitions") the following error is seen on imx6q: [ 0.000000] PL310 OF: cache setting yield illegal associativity [ 0.000000] PL310 OF: -2147097556 calculated, only 8 and 16 legal As imx6q does not pass the "cache-size" and "cache-sets" properties in DT, the function l2x0_cache_size_of_parse() returns early and keep the 'associativity' pointer uninitialized. To fix this problem, return error codes inside l2x0_cache_size_of_parse() and only use the 'associativity' pointer result if l2x0_cache_size_of_parse() succeeds. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-10-29perf/x86/intel: Revert incomplete and undocumented Broadwell client supportIngo Molnar3-181/+2
These patches: 86a349a28b24 ("perf/x86/intel: Add Broadwell core support") c46e665f0377 ("perf/x86: Add INST_RETIRED.ALL workarounds") fdda3c4aacec ("perf/x86/intel: Use Broadwell cache event list for Haswell") introduced magic constants and unexplained changes: https://lkml.org/lkml/2014/10/28/1128 https://lkml.org/lkml/2014/10/27/325 https://lkml.org/lkml/2014/8/27/546 https://lkml.org/lkml/2014/10/28/546 Peter Zijlstra has attempted to help out, to clean up the mess: https://lkml.org/lkml/2014/10/28/543 But has not received helpful and constructive replies which makes me doubt wether it can all be finished in time until v3.18 is released. Despite various review feedback the author (Andi Kleen) has answered only few of the review questions and has generally been uncooperative, only giving replies when prompted repeatedly, and only giving minimal answers instead of constructively explaining and helping along the effort. That kind of behavior is not acceptable. There's also a boot crash on Intel E5-1630 v3 CPUs reported for another commit from Andi Kleen: e735b9db12d7 ("perf/x86/intel/uncore: Add Haswell-EP uncore support") https://lkml.org/lkml/2014/10/22/730 Which is not yet resolved. The uncore driver is independent in theory, but the crash makes me worry about how well all these patches were tested and makes me uneasy about the level of interminging that the Broadwell and Haswell code has received by the commits above. As a first step to resolve the mess revert the Broadwell client commits back to the v3.17 version, before we run out of time and problematic code hits a stable upstream kernel. ( If the Haswell-EP crash is not resolved via a simple fix then we'll have to revert the Haswell-EP uncore driver as well. ) The Broadwell client series has to be submitted in a clean fashion, with single, well documented changes per patch. If they are submitted in time and are accepted during review then they can possibly go into v3.19 but will need additional scrutiny due to the rocky history of this patch set. Cc: Andi Kleen <ak@linux.intel.com> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: eranian@google.com Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/1409683455-29168-3-git-send-email-andi@firstfloor.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-10-29x86, pageattr: Prevent overflow in slow_virt_to_phys() for X86_PAEDexuan Cui1-1/+1
pte_pfn() returns a PFN of long (32 bits in 32-PAE), so "long << PAGE_SHIFT" will overflow for PFNs above 4GB. Due to this issue, some Linux 32-PAE distros, running as guests on Hyper-V, with 5GB memory assigned, can't load the netvsc driver successfully and hence the synthetic network device can't work (we can use the kernel parameter mem=3000M to work around the issue). Cast pte_pfn() to phys_addr_t before shifting. Fixes: "commit d76565344512: x86, mm: Create slow_virt_to_phys()" Signed-off-by: Dexuan Cui <decui@microsoft.com> Cc: K. Y. Srinivasan <kys@microsoft.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Cc: gregkh@linuxfoundation.org Cc: linux-mm@kvack.org Cc: olaf@aepfle.de Cc: apw@canonical.com Cc: jasowang@redhat.com Cc: dave.hansen@intel.com Cc: riel@redhat.com Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/1414580017-27444-1-git-send-email-decui@microsoft.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-10-29ACPI, irq, x86: Return IRQ instead of GSI in mp_register_gsi()Jiang Liu1-1/+1
Function mp_register_gsi() returns blindly the GSI number for the ACPI SCI interrupt. That causes a regression when the GSI for ACPI SCI is shared with other devices. The regression was caused by commit 84245af7297ced9e8fe "x86, irq, ACPI: Change __acpi_register_gsi to return IRQ number instead of GSI" and exposed on a SuperMicro system, which shares one GSI between ACPI SCI and PCI device, with following failure: http://sourceforge.net/p/linux1394/mailman/linux1394-user/?viewmonth=201410 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 20 low level) [ 2.699224] firewire_ohci 0000:06:00.0: failed to allocate interrupt 20 Return mp_map_gsi_to_irq(gsi, 0) instead of the GSI number. Reported-and-Tested-by: Daniel Robbins <drobbins@funtoo.org> Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Len Brown <len.brown@intel.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: <stable@vger.kernel.org> # 3.17 Link: http://lkml.kernel.org/r/1414387308-27148-4-git-send-email-jiang.liu@linux.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-10-29x86, intel-mid: Create IRQs for APB timers and RTC timersJiang Liu2-2/+2
Intel MID platforms has no legacy interrupts, so no IRQ descriptors preallocated. We need to call mp_map_gsi_to_irq() to create IRQ descriptors for APB timers and RTC timers, otherwise it may cause invalid memory access as: [ 0.116839] BUG: unable to handle kernel NULL pointer dereference at 0000003a [ 0.123803] IP: [<c1071c0e>] setup_irq+0xf/0x4d Tested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: H. Peter Anvin <hpa@linux.intel.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: David Cohen <david.a.cohen@linux.intel.com> Cc: <stable@vger.kernel.org> # 3.17 Link: http://lkml.kernel.org/r/1414387308-27148-3-git-send-email-jiang.liu@linux.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-10-29x86: Don't enable F00F workaround on Intel Quark processorsDave Jones1-2/+3
The Intel Quark processor is a part of family 5, but does not have the F00F bug present in Pentiums of the same family. Pentiums were models 0 through 8, Quark is model 9. Signed-off-by: Dave Jones <davej@redhat.com> Cc: Bryan O'Donoghue <pure.logic@nexus-software.ie> Link: http://lkml.kernel.org/r/20141028175753.GA12743@redhat.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-10-29ARM: enable bpf syscallRussell King2-0/+2
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-10-29powerpc/numa: ensure per-cpu NUMA mappings are correct on topology updateNishanth Aravamudan1-1/+4
We received a report of warning in kernel/sched/core.c where the sched group was NULL on an LPAR after a topology update. This seems to occur because after the topology update has moved the CPUs, cpu_to_node is returning the old value still, which ends up breaking the consistency of the NUMA topology in the per-cpu maps. Ensure that we update the per-cpu fields when we re-map CPUs. Signed-off-by: Nishanth Aravamudan <nacc@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-10-29powerpc/numa: use cached value of update->cpu in update_cpu_topologyNishanth Aravamudan1-2/+2
There isn't any need to keep referring to update->cpu, as we've already checked cpu == update->cpu at this point. Signed-off-by: Nishanth Aravamudan <nacc@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-10-28Merge branch 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-armLinus Torvalds2-5/+15
Pull ARM fixes from Russell King: "A couple of ARM fixes. We fix some printk formats for ptrdiff_t quantities which cause GCC 4.9 to complain, and we also blacklist known buggy GCC 4.8.x compilers as their miscompilation is serious enough to cause filesystem corruption, even through many distros have fixed their versions" * 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: ARM: fix some printk formats ARM: Blacklist GCC 4.8.0 to GCC 4.8.2 - PR58854
2014-10-28sparc: Hook up bpf system call.David S. Miller3-4/+5
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-28x86/irq: Fix XT-PIC-XT-PIC in /proc/interruptsMaciej W. Rozycki2-4/+2
Fix duplicate XT-PIC seen in /proc/interrupts on x86 systems that make use of 8259A Programmable Interrupt Controllers. Specifically convert output like this: CPU0 0: 76573 XT-PIC-XT-PIC timer 1: 11 XT-PIC-XT-PIC i8042 2: 0 XT-PIC-XT-PIC cascade 4: 8 XT-PIC-XT-PIC serial 6: 3 XT-PIC-XT-PIC floppy 7: 0 XT-PIC-XT-PIC parport0 8: 1 XT-PIC-XT-PIC rtc0 10: 448 XT-PIC-XT-PIC fddi0 12: 23 XT-PIC-XT-PIC eth0 14: 2464 XT-PIC-XT-PIC ide0 NMI: 0 Non-maskable interrupts ERR: 0 to one like this: CPU0 0: 122033 XT-PIC timer 1: 11 XT-PIC i8042 2: 0 XT-PIC cascade 4: 8 XT-PIC serial 6: 3 XT-PIC floppy 7: 0 XT-PIC parport0 8: 1 XT-PIC rtc0 10: 145 XT-PIC fddi0 12: 31 XT-PIC eth0 14: 2245 XT-PIC ide0 NMI: 0 Non-maskable interrupts ERR: 0 that is one like we used to have from ~2.2 till it was changed sometime. The rationale is there is no value in this duplicate information, it merely clutters output and looks ugly. We only have one handler for 8259A interrupts so there is no need to give it a name separate from the name already given to irq_chip. We could define meaningful names for handlers based on bits in the ELCR register on systems that have it or the value of the LTIM bit we use in ICW1 otherwise (hardcoded to 0 though with MCA support gone), to tell edge-triggered and level-triggered inputs apart. While that information does not affect 8259A interrupt handlers it could help people determine which lines are shareable and which are not. That is material for a separate change though. Any tools that parse /proc/interrupts are supposed not to be affected since it was many years we used the format this change converts back to. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/alpine.LFD.2.11.1410260147190.21390@eddie.linux-mips.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-10-28perf/x86: Fix compile warnings for intel_uncorePeter Zijlstra2-2/+9
The uncore drivers require PCI and generate compile time warnings when !CONFIG_PCI. Reported-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: Josh Triplett <josh@joshtriplett.org> Cc: Stephane Eranian <eranian@google.com> Cc: Yan, Zheng <zheng.z.yan@intel.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-10-28perf: Fix and clean up initialization of pmu::event_idxPeter Zijlstra3-18/+0
Andy reported that the current state of event_idx is rather confused. So remove all but the x86_pmu implementation and change the default to return 0 (the safe option). Reported-by: Andy Lutomirski <luto@amacapital.net> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Christoph Lameter <cl@linux.com> Cc: Cody P Schafer <cody@linux.vnet.ibm.com> Cc: Cody P Schafer <dev@codyps.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Cc: Himangi Saraogi <himangi774@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Paul Mackerras <paulus@samba.org> Cc: sukadev@linux.vnet.ibm.com <sukadev@linux.vnet.ibm.com> Cc: Thomas Huth <thuth@linux.vnet.ibm.com> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: linux390@de.ibm.com Cc: linuxppc-dev@lists.ozlabs.org Cc: linux-s390@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-10-28perf: Fix bogus kernel printkPeter Zijlstra (Intel)1-2/+3
Andy spotted the fail in what was intended as a conditional printk level. Reported-by: Andy Lutomirski <luto@amacapital.net> Fixes: cc6cd47e7395 ("perf/x86: Tone down kernel messages when the PMU check fails in a virtual environment") Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/20141007124757.GH19379@twins.programming.kicks-ass.net Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-10-28sched: stop the unbound recursion in preempt_schedule_context()Oleg Nesterov1-0/+1
preempt_schedule_context() does preempt_enable_notrace() at the end and this can call the same function again; exception_exit() is heavy and it is quite possible that need-resched is true again. 1. Change this code to dec preempt_count() and check need_resched() by hand. 2. As Linus suggested, we can use the PREEMPT_ACTIVE bit and avoid the enable/disable dance around __schedule(). But in this case we need to move into sched/core.c. 3. Cosmetic, but x86 forgets to declare this function. This doesn't really matter because it is only called by asm helpers, still it make sense to add the declaration into asm/preempt.h to match preempt_schedule(). Reported-by: Sasha Levin <sasha.levin@oracle.com> Signed-off-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alexander Graf <agraf@suse.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Christoph Lameter <cl@linux.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Peter Anvin <hpa@zytor.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Chuck Ebbert <cebbert.lkml@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Link: http://lkml.kernel.org/r/20141005202322.GB27962@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-10-28powerpc/mm: Use appropriate ESID mask in copro_calculate_slb()Ian Munsie1-2/+1
This patch makes copro_calculate_slb() mask the ESID by the correct mask for 1T vs 256M segments. This has no effect by itself as the extra bits were ignored, but it makes debugging the segment table entries easier and means that we can directly compare the ESID values for duplicates without needing to worry about masking in the comparison. This will be used to simplify a comparison in the following patch. Signed-off-by: Ian Munsie <imunsie@au1.ibm.com> Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-10-28x86, cma: Reserve DMA contiguous area after initmem_init()Weijie Yang1-1/+1
Fengguang Wu reported a boot crash on the x86 platform via the 0-day Linux Kernel Performance Test: cma: dma_contiguous_reserve: reserving 31 MiB for global area BUG: Int 6: CR2 (null) [<41850786>] dump_stack+0x16/0x18 [<41d2b1db>] early_idt_handler+0x6b/0x6b [<41072227>] ? __phys_addr+0x2e/0xca [<41d4ee4d>] cma_declare_contiguous+0x3c/0x2d7 [<41d6d359>] dma_contiguous_reserve_area+0x27/0x47 [<41d6d4d1>] dma_contiguous_reserve+0x158/0x163 [<41d33e0f>] setup_arch+0x79b/0xc68 [<41d2b7cf>] start_kernel+0x9c/0x456 [<41d2b2ca>] i386_start_kernel+0x79/0x7d (See details at: https://lkml.org/lkml/2014/10/8/708) It is because dma_contiguous_reserve() is called before initmem_init() in x86, the variable high_memory is not initialized but accessed by __pa(high_memory) in dma_contiguous_reserve(). This patch moves dma_contiguous_reserve() after initmem_init() so that high_memory is initialized before accessed. Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Weijie Yang <weijie.yang@samsung.com> Acked-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: Michal Nazarewicz <mina86@mina86.com> Cc: iamjoonsoo.kim@lge.com Cc: 'Linux-MM' <linux-mm@kvack.org> Cc: 'Weijie Yang' <weijie.yang.kh@gmail.com> Link: http://lkml.kernel.org/r/000101cfef69%2431e528a0%2495af79e0%24%25yang@samsung.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-10-28Revert "powerpc/powernv: Fix endian bug in LPC bus debugfs accessors"Michael Ellerman1-3/+1
This reverts commit bf7588a0859580a45c63cb082825d77c13eca357. Ben says although the code is not correct "[this] fix was completely wrong and does more damages than it fixes things." Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-10-27microblaze: Wire up bpf syscallMichal Simek3-1/+3
Add new bpf syscall. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2014-10-27microblaze: Fix IO space breakage after of_pci_range_to_resource() changeMichal Simek1-2/+7
Commit 0b0b0893d49b "of/pci: Fix the conversion of IO ranges into IO resources" changed the behaviour of of_pci_range_to_resource(). The issue is described here: "powerpc/pci: Fix IO space breakage after of_pci_range_to_resource() change" (sha1: aeba3731b150188685225b510886f1370d8814de) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2014-10-27microblaze: Fix missing NR_CPUS in menuconfigMichal Simek1-0/+4
The time Kconfig expects that NR_CPUS is defined. This patch remove this config warning: "kernel/time/Kconfig:163:warning: range is invalid" Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2014-10-26Merge tag 'armsoc-for-rc2' of ↵Linus Torvalds15-40/+94
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "Another week, another small batch of fixes. Most of these make zynq, socfpga and sunxi platforms work a bit better: - due to new requirements for regulators, DWMMC on socfpga broke past v3.17 - SMP spinup fix for socfpga - a few DT fixes for zynq - another option (FIXED_REGULATOR) for sunxi is needed that used to be selected by other options but no longer is. - a couple of small DT fixes for at91 - ...and a couple for i.MX" * tag 'armsoc-for-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: dts: imx28-evk: Let i2c0 run at 100kHz ARM: i.MX6: Fix "emi" clock name typo ARM: multi_v7_defconfig: enable CONFIG_MMC_DW_ROCKCHIP ARM: sunxi_defconfig: enable CONFIG_REGULATOR_FIXED_VOLTAGE ARM: dts: socfpga: Add a 3.3V fixed regulator node ARM: dts: socfpga: Fix SD card detect ARM: dts: socfpga: rename gpio nodes ARM: at91/dt: sam9263: fix PLLB frequencies power: reset: at91-reset: fix power down register MAINTAINERS: add atmel ssc driver maintainer entry arm: socfpga: fix fetching cpu1start_addr for SMP ARM: zynq: DT: trivial: Fix mc node ARM: zynq: DT: Add cadence watchdog node ARM: zynq: DT: Add missing reference for memory-controller ARM: zynq: DT: Add missing reference for ADC ARM: zynq: DT: Add missing address for L2 pl310 ARM: zynq: DT: Remove 222 MHz OPP ARM: zynq: DT: Fix GEM register area size
2014-10-26Merge tag 'imx-fixes-3.18' of ↵Olof Johansson2-8/+7
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into fixes Merge "ARM: imx: fixes for 3.18" from Shawn Guo: The i.MX fixes for 3.18: - Revert one patch which increases I2C bus frequency on imx28-evk - Fix a typo on imx6q EIM clock name * tag 'imx-fixes-3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: dts: imx28-evk: Let i2c0 run at 100kHz ARM: i.MX6: Fix "emi" clock name typo Signed-off-by: Olof Johansson <olof@lixom.net>
2014-10-25ARM: dts: imx28-evk: Let i2c0 run at 100kHzFabio Estevam1-1/+0
Commit 78b81f4666fb ("ARM: dts: imx28-evk: Run I2C0 at 400kHz") caused issues when doing the following sequence in loop: - Boot the kernel - Perform audio playback - Reboot the system via 'reboot' command In many times the audio card cannot be probed, which causes playback to fail. After restoring to the original i2c0 frequency of 100kHz there is no such problem anymore. This reverts commit 78b81f4666fbb22a20b1e63e5baf197ad2e90e88. Cc: <stable@vger.kernel.org> # 3.16+ Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2014-10-25ARM: i.MX6: Fix "emi" clock name typoSteve Longerbeam1-7/+7
Fix a typo error, the "emi" names refer to the eim clocks. The change fixes typo in EIM and EIM_SLOW pre-output dividers and selectors clock names. Notably EIM_SLOW clock itself is named correctly. Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com> [vladimir_zapolskiy@mentor.com: ported to v3.17] Signed-off-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> Cc: Sascha Hauer <kernel@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2014-10-25i386/audit: stop scribbling on the stack frameEric Paris1-8/+7
git commit b4f0d3755c5e9cc86292d5fd78261903b4f23d4a was very very dumb. It was writing over %esp/pt_regs semi-randomly on i686 with the expected "system can't boot" results. As noted in: https://bugs.freedesktop.org/show_bug.cgi?id=85277 This patch stops fscking with pt_regs. Instead it sets up the registers for the call to __audit_syscall_entry in the most obvious conceivable way. It then does just a tiny tiny touch of magic. We need to get what started in PT_EDX into 0(%esp) and PT_ESI into 4(%esp). This is as easy as a pair of pushes. After the call to __audit_syscall_entry all we need to do is get that now useless junk off the stack (pair of pops) and reload %eax with the original syscall so other stuff can keep going about it's business. Reported-by: Paulo Zanoni <przanoni@gmail.com> Signed-off-by: Eric Paris <eparis@redhat.com> Link: http://lkml.kernel.org/r/1414037043-30647-1-git-send-email-eparis@redhat.com Cc: Richard Guy Briggs <rgb@redhat.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>