summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)AuthorFilesLines
2014-12-04xen/pci: Defer initialization of MSI ops on HVM guestsBoris Ostrovsky1-2/+13
If the hardware supports APIC virtualization we may decide not to use pirqs and instead use APIC/x2APIC directly, meaning that we don't want to set x86_msi.setup_msi_irqs and x86_msi.teardown_msi_irq to Xen-specific routines. However, x2APIC is not set up by the time pci_xen_hvm_init() is called so we need to postpone setting these ops until later, when we know which APIC mode is used. (Note that currently x2APIC is never initialized on HVM guests. This may change in the future) Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2014-12-04xen/arm: introduce GNTTABOP_cache_flushStefano Stabellini1-2/+32
Introduce support for new hypercall GNTTABOP_cache_flush. Use it to perform cache flashing on pages used for dma when necessary. If GNTTABOP_cache_flush is supported by the hypervisor, we don't need to bounce dma map operations that involve foreign grants and non-coherent devices. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Ian Campbell <ian.campbell@citrix.com>
2014-12-04xen/arm/arm64: introduce xen_arch_need_swiotlbStefano Stabellini3-0/+18
Introduce an arch specific function to find out whether a particular dma mapping operation needs to bounce on the swiotlb buffer. On ARM and ARM64, if the page involved is a foreign page and the device is not coherent, we need to bounce because at unmap time we cannot execute any required cache maintenance operations (we don't know how to find the pfn from the mfn). No change of behaviour for x86. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Reviewed-by: David Vrabel <david.vrabel@citrix.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Ian Campbell <ian.campbell@citrix.com> Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2014-12-04xen/arm/arm64: merge xen/mm32.c into xen/mm.cStefano Stabellini4-138/+86
Merge xen/mm32.c into xen/mm.c. As a consequence the code gets compiled on arm64 too. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
2014-12-04xen/arm: use hypercall to flush caches in map_pageStefano Stabellini2-1/+24
In xen_dma_map_page, if the page is a local page, call the native map_page dma_ops. If the page is foreign, call __xen_dma_map_page that issues any required cache maintenane operations via hypercall. The reason for doing this is that the native dma_ops map_page could allocate buffers than need to be freed. If the page is foreign we don't call the native unmap_page dma_ops function, resulting in a memory leak. Suggested-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
2014-12-04xen: add a dma_addr_t dev_addr argument to xen_dma_map_pageStefano Stabellini3-6/+6
dev_addr is the machine address of the page. The new parameter can be used by the ARM and ARM64 implementations of xen_dma_map_page to find out if the page is a local page (pfn == mfn) or a foreign page (pfn != mfn). dev_addr could be retrieved again from the physical address, using pfn_to_mfn, but it requires accessing an rbtree. Since we already have the dev_addr in our hands at the call site there is no need to get the mfn twice. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2014-12-04xen/arm: use is_device_dma_coherentStefano Stabellini1-3/+3
Use is_device_dma_coherent to check whether we need to issue cache maintenance operations rather than checking on the existence of a particular dma_ops function for the device. This is correct because coherent devices don't need cache maintenance operations - arm_coherent_dma_ops does not set the hooks that we were previously checking for existance. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Ian Campbell <ian.campbell@citrix.com>
2014-12-04arm: introduce is_device_dma_coherentStefano Stabellini2-0/+8
Introduce a boolean flag and an accessor function to check whether a device is dma_coherent. Set the flag from set_arch_dma_coherent_ops. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Russell King <linux@arm.linux.org.uk>
2014-12-04arm64: introduce is_device_dma_coherentStefano Stabellini2-0/+8
Introduce a boolean flag and an accessor function to check whether a device is dma_coherent. Set the flag from set_arch_dma_coherent_ops. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
2014-12-04xen/arm: if(pfn_valid(pfn)) call native dma_opsStefano Stabellini2-45/+54
Remove code duplication in mm32.c by calling the native dma_ops if the page is a local page (not a foreign page). Use a simple pfn_valid(pfn) check to figure out if the page is local, exploiting the fact that dom0 is mapped 1:1, therefore pfn_valid always returns false when called on a foreign mfn. Suggested-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
2014-12-04xen/arm: remove outer_*_range callStefano Stabellini1-9/+0
Dom0 is not actually capable of issuing outer_inv_range or outer_clean_range calls. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Acked-by: Ian Campbell <ian.campbell@citrix.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
2014-12-04xen/arm: remove handling of XENFEAT_grant_map_identityStefano Stabellini2-89/+1
The feature has been removed from Xen. Also Linux cannot use it on ARM32 without CONFIG_ARM_LPAE. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Acked-by: Ian Campbell <ian.campbell@citrix.com> Reviewed-by: David Vrabel <david.vrabel@citrix.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
2014-11-29Merge tag 'armsoc-for-rc7' of ↵Linus Torvalds5-12/+20
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Arnd Bergmann: "Not much interesting going on fixes-wise for us this week, as it should be for an -rc7. I'm not expecting Olof to work much over Thanksgiving weekend, so I decided to take over again and push these out to you. Just four simple fixes this week: - one missing of_node_put() on armv7 based mvebu - forcing the USB host into the right mode on Chromebook (exynos5-snow) - enabling two important drivers for exynos_defconfig - fixing a noncritical bug for tegra that would cause a regression with common code patches queued for 3.19" * tag 'armsoc-for-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: tegra: irq: fix buggy usage of irq_data irq field ARM: exynos_defconfig: Enable max77802 rtc and clock drivers ARM: dts: Explicitly set dr_mode on exynos5250-snow ARM: mvebu: add missing of_node_put() call in coherency.c
2014-11-29Merge branch 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-armLinus Torvalds4-44/+4
Pull ARM fixes from Russell King: "Another round of relatively small ARM fixes. Thomas spotted that the strex backoff delay bit was a disable bit, so it needed to be clear for this to work. Vladimir spotted that using a restart block for the cache flush operation would return -EINTR, which userspace was not expecting. Dmitry spotted that the auxiliary control register accesses for Xscale were not correct" * 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: ARM: 8226/1: cacheflush: get rid of restarting block ARM: 8222/1: mvebu: enable strex backoff delay ARM: 8216/1: xscale: correct auxiliary register in suspend/resume
2014-11-28Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds15-31/+84
Pull mips fixes from Ralf Baechle: "The hopefully final round of fixes for 3.18: - Fix a number of build errors affecting particular configurations. - Handle EVA correctly when flushing a signal trampoline and dcache lines. - Fix printks printing jibberish. - Handle 64 bit memory addresses correctly when adding memory chunk on 32 bit kernels. - Fix a race condition in the hardware tablewalker code" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: MIPS: tlbex: Fix potential HTW race on TLBL/M/S handlers MIPS: Fix address type used for early memory detection. MIPS: Kconfig: Don't allow both microMIPS and SmartMIPS to be selected. MIPS: kernel: cps-vec: Set ISA level to mips32r2 for the MIPS MT ASE MIPS: Netlogic: handle modular AHCI builds MIPS: Netlogic: handle modular USB case MIPS: Loongson: Make platform serial setup always built-in. MIPS: fix EVA & non-SMP non-FPU FP context signal handling MIPS: cpu-probe: Set the FTLB probability bit on supported cores MIPS: BMIPS: Fix ".previous without corresponding .section" warnings MIPS: uaccess.h: Fix strnlen_user comment. MIPS: r4kcache: Add EVA case for protected_writeback_dcache_line MIPS: Fix info about plat_setup in arch_mem_init comment MIPS: rtlx: Remove KERN_DEBUG from pr_debug() arguments in rtlx.c MIPS: SEAD3: Fix LED device registration. MIPS: Fix a copy & paste error in unistd.h
2014-11-28Merge branch 'for-linus' of ↵Linus Torvalds5-8/+8
git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux Pull powerpc fixes from Michael Ellerman: "Here are five fixes for you to pull please. They're all CC'ed to stable except the "Fix PE state format" one which went in this release" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux: powerpc: 32 bit getcpu VDSO function uses 64 bit instructions powerpc/powernv: Replace OPAL_DEASSERT_RESET with EEH_RESET_DEACTIVATE powerpc/eeh: Fix PE state format powerpc/pseries: Fix endiannes issue in RTAS call from xmon powerpc/powernv: Fix the hmi event version check.
2014-11-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparcLinus Torvalds1-0/+8
Pull sparc fixlet from David Miller: "Aparc fix to add dma_cache_sync(), even if a nop it should be provided if dma_{alloc,free}_noncoherent() is provided too" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: sparc: Add NOP dma_cache_sync() implementation.
2014-11-27MIPS: tlbex: Fix potential HTW race on TLBL/M/S handlersLeonid Yegoshin1-1/+9
There is a potential race when probing the TLB in TLBL/M/S exception handlers for a matching entry. Between the time we hit a TLBL/S/M exception and the time we get to execute the TLBP instruction, the HTW may have replaced the TLB entry we are interested in hence the TLB probe may fail. However, in the existing handlers, we never checked the status of the TLBP (ie check the result in the C0/Index register). We fix this by adding such a check when the core implements the HTW. If we couldn't find a matching entry, we return back and try again. Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Reviewed-by: James Hogan <james.hogan@imgtec.com> Cc: <stable@vger.kernel.org> # v3.17+ Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/8599/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-27ARM: 8226/1: cacheflush: get rid of restarting blockVladimir Murzin2-40/+2
We cannot restart cacheflush safely if a process provides user-defined signal handler and signal is pending. In this case -EINTR is returned and it is expected that process re-invokes syscall. However, there are a few problems with that: * looks like nobody bothers checking return value from cacheflush * but if it did, we don't provide the restart address for that, so the process has to use the same range again * ...and again, what might lead to looping forever So, remove cacheflush restarting code and terminate cache flushing as early as fatal signal is pending. Cc: stable@vger.kernel.org # 3.12+ Reported-by: Chanho Min <chanho.min@lge.com> Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-11-27ARM: 8222/1: mvebu: enable strex backoff delayThomas Petazzoni1-2/+0
Under extremely rare conditions, in an MPCore node consisting of at least 3 CPUs, two CPUs trying to perform a STREX to data on the same shared cache line can enter a livelock situation. This patch enables the HW mechanism that overcomes the bug. This fixes the incorrect setup of the STREX backoff delay bit due to a wrong description in the specification. Note that enabling the STREX backoff delay mechanism is done by leaving the bit *cleared*, while the bit was currently being set by the proc-v7.S code. [Thomas: adapt to latest mainline, slightly reword the commit log, add stable markers.] Fixes: de4901933f6d ("arm: mm: Add support for PJ4B cpu and init routines") Cc: <stable@vger.kernel.org> # v3.8+ Signed-off-by: Nadav Haklai <nadavh@marvell.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Acked-by: Jason Cooper <jason@lakedaemon.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-11-27Merge tag 'mvebu-fixes-3.18-2' of git://git.infradead.org/linux-mvebu into fixesArnd Bergmann1-0/+2
Pull "mvebu fixes for v3.18 (round 2)" frm Jason Cooper: - mvebu - coherency.c needed an of_node_put() * tag 'mvebu-fixes-3.18-2' of git://git.infradead.org/linux-mvebu: ARM: mvebu: add missing of_node_put() call in coherency.c Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-11-27Merge tag 'samsung-defconfig-v3.18' of ↵Arnd Bergmann1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into fixes Pull "Samsung defconfig update for v3.18" from Kukjin Kim: - enable max77802 rtc and clock drivers for exynos_defconfig : enable the kernel config options to have the drivers for max77802 including rtc and 2-ch 32kHz clock outputs * tag 'samsung-defconfig-v3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: exynos_defconfig: Enable max77802 rtc and clock drivers Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-11-27Merge tag 'samsung-fixes-v3.18' of ↵Arnd Bergmann2-1/+5
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into fixes Pull "Samsung fixes for v3.18" from Kukjin Kim: - explicitly set dr_mode on exynos5250-snow this is required when kernel is built with USB gadget support. * tag 'samsung-fixes-v3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: dts: Explicitly set dr_mode on exynos5250-snow Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-11-27ARM: tegra: irq: fix buggy usage of irq_data irq fieldMarc Zyngier1-11/+11
The crazy gic_arch_extn thing that Tegra uses contains multiple references to the irq field in struct irq_data, and uses this to directly poke hardware register. But irq is the *virtual* irq number, something that has nothing to do with the actual HW irq (stored in the hwirq field). And once we put the stacked domain code in action, the whole thing explodes, as these two values are *very* different: root@bacon-fat:~# cat /proc/interrupts CPU0 CPU1 16: 25801 2075 GIC 29 twd 17: 0 0 GIC 73 timer0 112: 0 0 GPIO 58 c8000600.sdhci cd 123: 0 0 GPIO 69 c8000200.sdhci cd 279: 1126 0 GIC 122 serial 281: 0 0 GIC 70 7000c000.i2c 282: 0 0 GIC 116 7000c400.i2c 283: 0 0 GIC 124 7000c500.i2c 284: 300 0 GIC 85 7000d000.i2c [...] Just replacing all instances of irq with hwirq fixes the issue. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-11-27powerpc: 32 bit getcpu VDSO function uses 64 bit instructionsAnton Blanchard1-2/+2
I used some 64 bit instructions when adding the 32 bit getcpu VDSO function. Fix it. Fixes: 18ad51dd342a ("powerpc: Add VDSO version of getcpu") Cc: stable@vger.kernel.org Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-11-27powerpc/powernv: Replace OPAL_DEASSERT_RESET with EEH_RESET_DEACTIVATEGavin Shan1-1/+1
The flag passed to ioda_eeh_phb_reset() should be EEH_RESET_DEACTIVATE, which is translated to OPAL_DEASSERT_RESET or something else by the EEH backend accordingly. The patch replaces OPAL_DEASSERT_RESET with EEH_RESET_DEACTIVATE for ioda_eeh_phb_reset(). Cc: stable@vger.kernel.org Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-11-27powerpc/eeh: Fix PE state formatGavin Shan1-1/+1
Obviously I had wrong format given to the PE state output from /sys/bus/pci/devices/xxxx/eeh_pe_state with some typoes, which was introduced by commit 2013add4ce73. The patch fixes it up. Fixes: 2013add4ce73 ("powerpc/eeh: Show hex prefix for PE state sysfs") Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-11-27powerpc/pseries: Fix endiannes issue in RTAS call from xmonLaurent Dufour1-3/+3
On pseries system (LPAR) xmon failed to enter when running in LE mode, system is hunging. Inititating xmon will lead to such an output on the console: SysRq : Entering xmon cpu 0x15: Vector: 0 at [c0000003f39ffb10] pc: c00000000007ed7c: sysrq_handle_xmon+0x5c/0x70 lr: c00000000007ed7c: sysrq_handle_xmon+0x5c/0x70 sp: c0000003f39ffc70 msr: 8000000000009033 current = 0xc0000003fafa7180 paca = 0xc000000007d75e80 softe: 0 irq_happened: 0x01 pid = 14617, comm = bash Bad kernel stack pointer fafb4b0 at eca7cc4 cpu 0x15: Vector: 300 (Data Access) at [c000000007f07d40] pc: 000000000eca7cc4 lr: 000000000eca7c44 sp: fafb4b0 msr: 8000000000001000 dar: 10000000 dsisr: 42000000 current = 0xc0000003fafa7180 paca = 0xc000000007d75e80 softe: 0 irq_happened: 0x01 pid = 14617, comm = bash cpu 0x15: Exception 300 (Data Access) in xmon, returning to main loop xmon: WARNING: bad recursive fault on cpu 0x15 The root cause is that xmon is calling RTAS to turn off the surveillance when entering xmon, and RTAS is requiring big endian parameters. This patch is byte swapping the RTAS arguments when running in LE mode. Cc: stable@vger.kernel.org Signed-off-by: Laurent Dufour <ldufour@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-11-27powerpc/powernv: Fix the hmi event version check.Mahesh Salgaonkar1-1/+1
The current HMI event structure is an ABI and carries a version field to accommodate future changes without affecting/rearranging current structure members that are valid for previous versions. The current version check "if (hmi_evt->version != OpalHMIEvt_V1)" doesn't accomodate the fact that the version number may change in future. If firmware starts returning an HMI event with version > 1, this check will fail and no HMI information will be printed on older kernels. This patch fixes this issue. Cc: stable@vger.kernel.org # 3.17+ Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> [mpe: Reword changelog] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-11-27sparc: Add NOP dma_cache_sync() implementation.David S. Miller1-0/+8
This can be a NOP because we forward dma_{alloc,free}_noncoherent to dma_{alloc,free}_coherent. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-26kvm: fix kvm_is_mmio_pfn() and rename to kvm_is_reserved_pfn()Ard Biesheuvel2-4/+4
This reverts commit 85c8555ff0 ("KVM: check for !is_zero_pfn() in kvm_is_mmio_pfn()") and renames the function to kvm_is_reserved_pfn. The problem being addressed by the patch above was that some ARM code based the memory mapping attributes of a pfn on the return value of kvm_is_mmio_pfn(), whose name indeed suggests that such pfns should be mapped as device memory. However, kvm_is_mmio_pfn() doesn't do quite what it says on the tin, and the existing non-ARM users were already using it in a way which suggests that its name should probably have been 'kvm_is_reserved_pfn' from the beginning, e.g., whether or not to call get_page/put_page on it etc. This means that returning false for the zero page is a mistake and the patch above should be reverted. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-11-26arm/arm64: kvm: drop inappropriate use of kvm_is_mmio_pfn()Ard Biesheuvel1-1/+6
Instead of using kvm_is_mmio_pfn() to decide whether a host region should be stage 2 mapped with device attributes, add a new static function kvm_is_device_pfn() that disregards RAM pages with the reserved bit set, as those should usually not be mapped as device memory. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-11-26arm64: KVM: Handle traps of ICC_SRE_EL1 as RAZ/WIChristoffer Dall1-0/+9
When running on a system with a GICv3, we currenly don't allow the guest to access the system register interface of the GICv3. We do this by clearing the ICC_SRE_EL2.Enable, which causes all guest accesses to ICC_SRE_EL1 to trap to EL2 and causes all guest accesses to other ICC_ registers to cause an undefined exception in the guest. However, we currently don't handle the trap of guest accesses to ICC_SRE_EL1 and will spill out a warning. The trap just needs to handle the access as RAZ/WI, and a guest that tries to prod this register and set ICC_SRE_EL1.SRE=1, must read back the value (which Linux already does) to see if it succeeded, and will thus observe that ICC_SRE_EL1.SRE was not set. Add the simple trap handler in the sorted table of the system registers. Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> [ardb: added cp15 handling] Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-11-26arm64: KVM: fix unmapping with 48-bit VAsMark Rutland1-1/+2
Currently if using a 48-bit VA, tearing down the hyp page tables (which can happen in the absence of a GICH or GICV resource) results in the rather nasty splat below, evidently becasue we access a table that doesn't actually exist. Commit 38f791a4e499792e (arm64: KVM: Implement 48 VA support for KVM EL2 and Stage-2) added a pgd_none check to __create_hyp_mappings to account for the additional level of tables, but didn't add a corresponding check to unmap_range, and this seems to be the source of the problem. This patch adds the missing pgd_none check, ensuring we don't try to access tables that don't exist. Original splat below: kvm [1]: Using HYP init bounce page @83fe94a000 kvm [1]: Cannot obtain GICH resource Unable to handle kernel paging request at virtual address ffff7f7fff000000 pgd = ffff800000770000 [ffff7f7fff000000] *pgd=0000000000000000 Internal error: Oops: 96000004 [#1] PREEMPT SMP Modules linked in: CPU: 1 PID: 1 Comm: swapper/0 Not tainted 3.18.0-rc2+ #89 task: ffff8003eb500000 ti: ffff8003eb45c000 task.ti: ffff8003eb45c000 PC is at unmap_range+0x120/0x580 LR is at free_hyp_pgds+0xac/0xe4 pc : [<ffff80000009b768>] lr : [<ffff80000009cad8>] pstate: 80000045 sp : ffff8003eb45fbf0 x29: ffff8003eb45fbf0 x28: ffff800000736000 x27: ffff800000735000 x26: ffff7f7fff000000 x25: 0000000040000000 x24: ffff8000006f5000 x23: 0000000000000000 x22: 0000007fffffffff x21: 0000800000000000 x20: 0000008000000000 x19: 0000000000000000 x18: ffff800000648000 x17: ffff800000537228 x16: 0000000000000000 x15: 000000000000001f x14: 0000000000000000 x13: 0000000000000001 x12: 0000000000000020 x11: 0000000000000062 x10: 0000000000000006 x9 : 0000000000000000 x8 : 0000000000000063 x7 : 0000000000000018 x6 : 00000003ff000000 x5 : ffff800000744188 x4 : 0000000000000001 x3 : 0000000040000000 x2 : ffff800000000000 x1 : 0000007fffffffff x0 : 000000003fffffff Process swapper/0 (pid: 1, stack limit = 0xffff8003eb45c058) Stack: (0xffff8003eb45fbf0 to 0xffff8003eb460000) fbe0: eb45fcb0 ffff8003 0009cad8 ffff8000 fc00: 00000000 00000080 00736140 ffff8000 00736000 ffff8000 00000000 00007c80 fc20: 00000000 00000080 006f5000 ffff8000 00000000 00000080 00743000 ffff8000 fc40: 00735000 ffff8000 006d3030 ffff8000 006fe7b8 ffff8000 00000000 00000080 fc60: ffffffff 0000007f fdac1000 ffff8003 fd94b000 ffff8003 fda47000 ffff8003 fc80: 00502b40 ffff8000 ff000000 ffff7f7f fdec6000 00008003 fdac1630 ffff8003 fca0: eb45fcb0 ffff8003 ffffffff 0000007f eb45fd00 ffff8003 0009b378 ffff8000 fcc0: ffffffea 00000000 006fe000 ffff8000 00736728 ffff8000 00736120 ffff8000 fce0: 00000040 00000000 00743000 ffff8000 006fe7b8 ffff8000 0050cd48 00000000 fd00: eb45fd60 ffff8003 00096070 ffff8000 006f06e0 ffff8000 006f06e0 ffff8000 fd20: fd948b40 ffff8003 0009a320 ffff8000 00000000 00000000 00000000 00000000 fd40: 00000ae0 00000000 006aa25c ffff8000 eb45fd60 ffff8003 0017ca44 00000002 fd60: eb45fdc0 ffff8003 0009a33c ffff8000 006f06e0 ffff8000 006f06e0 ffff8000 fd80: fd948b40 ffff8003 0009a320 ffff8000 00000000 00000000 00735000 ffff8000 fda0: 006d3090 ffff8000 006aa25c ffff8000 00735000 ffff8000 006d3030 ffff8000 fdc0: eb45fdd0 ffff8003 000814c0 ffff8000 eb45fe50 ffff8003 006aaac4 ffff8000 fde0: 006ddd90 ffff8000 00000006 00000000 006d3000 ffff8000 00000095 00000000 fe00: 006a1e90 ffff8000 00735000 ffff8000 006d3000 ffff8000 006aa25c ffff8000 fe20: 00735000 ffff8000 006d3030 ffff8000 eb45fe50 ffff8003 006fac68 ffff8000 fe40: 00000006 00000006 fe293ee6 ffff8003 eb45feb0 ffff8003 004f8ee8 ffff8000 fe60: 004f8ed4 ffff8000 00735000 ffff8000 00000000 00000000 00000000 00000000 fe80: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 fea0: 00000000 00000000 00000000 00000000 00000000 00000000 000843d0 ffff8000 fec0: 004f8ed4 ffff8000 00000000 00000000 00000000 00000000 00000000 00000000 fee0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 ff00: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 ff20: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 ff40: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 ff60: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 ff80: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 ffa0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 ffc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000005 00000000 ffe0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Call trace: [<ffff80000009b768>] unmap_range+0x120/0x580 [<ffff80000009cad4>] free_hyp_pgds+0xa8/0xe4 [<ffff80000009b374>] kvm_arch_init+0x268/0x44c [<ffff80000009606c>] kvm_init+0x24/0x260 [<ffff80000009a338>] arm_init+0x18/0x24 [<ffff8000000814bc>] do_one_initcall+0x88/0x1a0 [<ffff8000006aaac0>] kernel_init_freeable+0x148/0x1e8 [<ffff8000004f8ee4>] kernel_init+0x10/0xd4 Code: 8b000263 92628479 d1000720 eb01001f (f9400340) ---[ end trace 3bc230562e926fa4 ]--- Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Jungseok Lee <jungseoklee85@gmail.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-11-24MIPS: Fix address type used for early memory detection.Steven J. Hill1-1/+1
In 'early_parse_mem' the data type used for the start and size of a memory region specified on the command line is incorrect. If 64-bit addressing is used, the value gets truncated. Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/8456/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-24MIPS: Kconfig: Don't allow both microMIPS and SmartMIPS to be selected.Markos Chandras1-2/+12
microMIPS and SmartMIPS can't be used together. This fixes the following build problem: Warning: the 32-bit microMIPS architecture does not support the `smartmips' extension arch/mips/kernel/entry.S:90: Error: unrecognized opcode `mtlhx $24' [...] arch/mips/kernel/entry.S:109: Error: unrecognized opcode `mtlhx $24' Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/7421/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-24MIPS: kernel: cps-vec: Set ISA level to mips32r2 for the MIPS MT ASEMarkos Chandras1-0/+2
Fixes the following build warnings: arch/mips/kernel/cps-vec.S: Assembler messages: arch/mips/kernel/cps-vec.S:228: Warning: the `mt' extension requires MIPS32 revision 2 or greater [...] arch/mips/kernel/cps-vec.S: Assembler messages: arch/mips/kernel/cps-vec.S:345: Warning: the `mt' extension requires MIPS32 revision 2 or greater Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: Paul Burton <Paul.Burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/7355/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-24MIPS: Netlogic: handle modular AHCI buildsFlorian Fainelli1-2/+4
Commits a951440971d0 ("MIPS: Netlogic: Support for XLP3XX on-chip SATA") and fedfcb1137d2 ("MIPS: Netlogic: XLP9XX on-chip SATA support") added ahci-init and ahci-init-xlp2 as objects to build when CONFIG_SATA_AHCI is enabled. If CONFIG_SATA_AHCI is made modular, these two files will also get built as modules (obj-m), which will result in the following linking failure: ERROR: "nlm_set_pic_extra_ack" [arch/mips/netlogic/xlp/ahci-init.ko] undefined! ERROR: "nlm_io_base" [arch/mips/netlogic/xlp/ahci-init.ko] undefined! ERROR: "nlm_nodes" [arch/mips/netlogic/xlp/ahci-init-xlp2.ko] undefined! ERROR: "nlm_set_pic_extra_ack" [arch/mips/netlogic/xlp/ahci-init-xlp2.ko] undefined! ERROR: "xlp_socdev_to_node" [arch/mips/netlogic/xlp/ahci-init-xlp2.ko] undefined! ERROR: "nlm_io_base" [arch/mips/netlogic/xlp/ahci-init-xlp2.ko] undefined! Just check whether CONFIG_SATA_AHCI is defined for this build, and if that is the case, add these objects to the list of built-in object files. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Cc: linux-mips@linux-mips.org Cc: ganesanr@broadcom.com Cc: jchandra@broadcom.com Patchwork: https://patchwork.linux-mips.org/patch/7855/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-24MIPS: Netlogic: handle modular USB caseFlorian Fainelli1-2/+4
Commit 1004165f346a ("MIPS: Netlogic: USB support for XLP") and then commit 9eac3591e78b ("MIPS: Netlogic: Add support for USB on XLP2xx") added usb-init and usb-init-xlp2 as objects to build when CONFIG_USB is enabled. If CONFIG_USB is made modular, these two files will also get built as modules (obj-m), which will result in the following linking failure: ERROR: "nlm_io_base" [arch/mips/netlogic/xlp/usb-init.ko] undefined! ERROR: "nlm_nodes" [arch/mips/netlogic/xlp/usb-init-xlp2.ko] undefined! ERROR: "nlm_set_pic_extra_ack" [arch/mips/netlogic/xlp/usb-init-xlp2.ko] undefined! ERROR: "xlp_socdev_to_node" [arch/mips/netlogic/xlp/usb-init-xlp2.ko] undefined! ERROR: "nlm_io_base" [arch/mips/netlogic/xlp/usb-init-xlp2.ko] undefined! Just check whether CONFIG_USB is defined for this build, and if that is the case, add these objects to the list of built-in object files. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Cc: linux-mips@linux-mips.org Cc: ganesanr@broadcom.com Cc: jchandra@broadcom.com Patchwork: https://patchwork.linux-mips.org/patch/7854/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-24MIPS: Loongson: Make platform serial setup always built-in.Aaro Koskinen1-1/+2
If SERIAL_8250 is compiled as a module, the platform specific setup for Loongson will be a module too, and it will not work very well. At least on Loongson 3 it will trigger a build failure, since loongson_sysconf is not exported to modules. Fix by making the platform specific serial code always built-in. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Reported-by: Ralf Baechle <ralf@linux-mips.org> Cc: stable@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: Huacai Chen <chenhc@lemote.com> Cc: Markos Chandras <Markos.Chandras@imgtec.com> Patchwork: https://patchwork.linux-mips.org/patch/8533/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-24MIPS: fix EVA & non-SMP non-FPU FP context signal handlingPaul Burton1-4/+4
The save_fp_context & restore_fp_context pointers were being assigned to the wrong variables if either: - The kernel is configured for UP & runs on a system without an FPU, since b2ead5282885 "MIPS: Move & rename fpu_emulator_{save,restore}_context". - The kernel is configured for EVA, since ca750649e08c "MIPS: kernel: signal: Prevent save/restore FPU context in user memory". This would lead to FP context being clobbered incorrectly when setting up a sigcontext, then the garbage values being saved uselessly when returning from the signal. Fix by swapping the pointer assignments appropriately. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: stable@vger.kernel.org # v3.15+ Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/8230/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-24MIPS: cpu-probe: Set the FTLB probability bit on supported coresMarkos Chandras2-1/+34
Make use of the Config6/FLTBP bit to set the probability of a TLBWR instruction to hit the FTLB or the VTLB. A value of 0 (which may be the default value on certain cores, such as proAptiv or P5600) means that a TLBWR instruction will never hit the VTLB which leads to performance limitations since it effectively decreases the number of available TLB slots. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Reviewed-by: James Hogan <james.hogan@imgtec.com> Cc: <stable@vger.kernel.org> # v3.15+ Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/8368/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-24MIPS: BMIPS: Fix ".previous without corresponding .section" warningsKevin Cernekee1-3/+0
Commit 078a55fc824c1 ("Delete __cpuinit/__CPUINIT usage from MIPS code") removed our __CPUINIT directives, so now the ".previous" directives are superfluous. Remove them. Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Cc: f.fainelli@gmail.com Cc: mbizon@freebox.fr Cc: jogo@openwrt.org Cc: jfraser@broadcom.com Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/8156/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-24MIPS: uaccess.h: Fix strnlen_user comment.Ralf Baechle1-4/+2
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-24MIPS: r4kcache: Add EVA case for protected_writeback_dcache_lineMarkos Chandras1-0/+4
Commit de8974e3f76c0 ("MIPS: asm: r4kcache: Add EVA cache flushing functions") added cache function for EVA using the cachee instruction. However, it didn't add a case for the protected_writeback_dcache_line. mips_dsemul() calls r4k_flush_cache_sigtramp() which in turn uses the protected_writeback_dcache_line() to flush the trampoline code back to memory. This used the wrong "cache" instruction leading to random userland crashes on non-FPU cores. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: <stable@vger.kernel.org> # v3.15+ Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/8331/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-24MIPS: Fix info about plat_setup in arch_mem_init commentRafał Miłecki1-1/+1
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/7607/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-24MIPS: rtlx: Remove KERN_DEBUG from pr_debug() arguments in rtlx.cMasanari Iida1-2/+2
Signed-off-by: Masanari Iida <standby24x7@gmail.com> Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/7938/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-24MIPS: SEAD3: Fix LED device registration.Ralf Baechle1-6/+2
This isn't a module and shouldn't be one. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Cc: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/8202/
2014-11-24MIPS: Fix a copy & paste error in unistd.hHuacai Chen1-1/+1
Commit 5df4c8dbbc (MIPS: Wire up bpf syscall.) break the N32 build because of a copy & paste error. Signed-off-by: Huacai Chen <chenhc@lemote.com> Cc: John Crispin <john@phrozen.org> Cc: Steven J. Hill <Steven.Hill@imgtec.com> Cc: linux-mips@linux-mips.org Cc: Fuxin Zhang <zhangfx@lemote.com> Cc: Zhangjin Wu <wuzhangjin@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/8390/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-24powerpc/pci: Remove unused force_32bit_msi quirkBenjamin Herrenschmidt2-12/+0
This is now fully replaced with the generic "no_64bit_msi" one that is set by the respective drivers directly. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>