summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)AuthorFilesLines
2020-06-03ARM: dts: bcm2835-rpi-zero-w: Fix led polarityVincent Stehlé1-1/+1
[ Upstream commit 58bb90ab415562eededb932455046924e65df342 ] The status "ACT" led on the Raspberry Pi Zero W is on when GPIO 47 is low. This has been verified on a board and somewhat confirmed by both the GPIO name ("STATUS_LED_N") and the reduced schematics [1]. [1]: https://www.raspberrypi.org/documentation/hardware/raspberrypi/schematics/rpi_SCH_ZeroW_1p1_reduced.pdf Fixes: 2c7c040c73e9 ("ARM: dts: bcm2835: Add Raspberry Pi Zero W") Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net> Cc: Stefan Wahren <stefan.wahren@i2se.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-06-03ARM: dts/imx6q-bx50v3: Set display interface clock parentsRobert Beckett4-25/+15
[ Upstream commit 665e7c73a7724a393b4ec92d1ae1e029925ef2b7 ] Avoid LDB and IPU DI clocks both using the same parent. LDB requires pasthrough clock to avoid breaking timing while IPU DI does not. Force IPU DI clocks to use IMX6QDL_CLK_PLL2_PFD0_352M as parent and LDB to use IMX6QDL_CLK_PLL5_VIDEO_DIV. This fixes an issue where attempting atomic modeset while using HDMI and display port at the same time causes LDB clock programming to destroy the programming of HDMI that was done during the same modeset. Cc: stable@vger.kernel.org Signed-off-by: Robert Beckett <bob.beckett@collabora.com> [Use IMX6QDL_CLK_PLL2_PFD0_352M instead of IMX6QDL_CLK_PLL2_PFD2_396M originally chosen by Robert Beckett to avoid affecting eMMC clock by DRM atomic updates] Signed-off-by: Ian Ray <ian.ray@ge.com> [Squash Robert's and Ian's commits for bisectability, update patch description and add stable tag] Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-06-03ARM: dts: imx6q-bx50v3: Add internal switchSebastian Reichel1-0/+62
[ Upstream commit e26dead442689a861358f33126210b0f8de615a9 ] B850v3, B650v3 and B450v3 all have a GPIO bit banged MDIO bus to communicate with a Marvell switch. On all devices the switch is connected to a PCI based network card, which needs to be referenced by DT, so this also adds the common PCI root node. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-06-03ARM: uaccess: fix DACR mismatch with nested exceptionsRussell King1-5/+20
[ Upstream commit 71f8af1110101facfad68989ff91f88f8e2c3e22 ] Tomas Paukrt reports that his SAM9X60 based system (ARM926, ARMv5TJ) fails to fix up alignment faults, eventually resulting in a kernel oops. The problem occurs when using CONFIG_CPU_USE_DOMAINS with commit e6978e4bf181 ("ARM: save and reset the address limit when entering an exception"). This is because the address limit is set back to TASK_SIZE on exception entry, and, although it is restored on exception exit, the domain register is not. Hence, this sequence can occur: interrupt pt_regs->addr_limit = addr_limit // USER_DS addr_limit = USER_DS alignment exception __probe_kernel_read() old_fs = get_fs() // USER_DS set_fs(KERNEL_DS) addr_limit = KERNEL_DS dacr.kernel = DOMAIN_MANAGER interrupt pt_regs->addr_limit = addr_limit // KERNEL_DS addr_limit = USER_DS alignment exception __probe_kernel_read() old_fs = get_fs() // USER_DS set_fs(KERNEL_DS) addr_limit = KERNEL_DS dacr.kernel = DOMAIN_MANAGER ... set_fs(old_fs) addr_limit = USER_DS dacr.kernel = DOMAIN_CLIENT ... addr_limit = pt_regs->addr_limit // KERNEL_DS interrupt returns At this point, addr_limit is correctly restored to KERNEL_DS for __probe_kernel_read() to continue execution, but dacr.kernel is not, it has been reset by the set_fs(old_fs) to DOMAIN_CLIENT. This would not have happened prior to the mentioned commit, because addr_limit would remain KERNEL_DS, so get_fs() would have returned KERNEL_DS, and so would correctly nest. This commit fixes the problem by also saving the DACR on exception entry if either CONFIG_CPU_SW_DOMAIN_PAN or CONFIG_CPU_USE_DOMAINS are enabled, and resetting the DACR appropriately on exception entry to match addr_limit and PAN settings. Fixes: e6978e4bf181 ("ARM: save and reset the address limit when entering an exception") Reported-by: Tomas Paukrt <tomas.paukrt@advantech.cz> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-06-03ARM: uaccess: integrate uaccess_save and uaccess_restoreRussell King1-17/+13
[ Upstream commit 8ede890b0bcebe8c760aacfe20e934d98c3dc6aa ] Integrate uaccess_save / uaccess_restore macros into the new uaccess_entry / uaccess_exit macros respectively. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-06-03ARM: uaccess: consolidate uaccess asm to asm/uaccess-asm.hRussell King4-89/+112
[ Upstream commit 747ffc2fcf969eff9309d7f2d1d61cb8b9e1bb40 ] Consolidate the user access assembly code to asm/uaccess-asm.h. This moves the csdb, check_uaccess, uaccess_mask_range_ptr, uaccess_enable, uaccess_disable, uaccess_save, uaccess_restore macros, and creates two new ones for exception entry and exit - uaccess_entry and uaccess_exit. This makes the uaccess_save and uaccess_restore macros private to asm/uaccess-asm.h. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-06-03ARM: 8843/1: use unified assembler in headersStefan Agner3-14/+14
[ Upstream commit c001899a5d6c2d7a0f3b75b2307ddef137fb46a6 ] Use unified assembler syntax (UAL) in headers. Divided syntax is considered deprecated. This will also allow to build the kernel using LLVM's integrated assembler. Signed-off-by: Stefan Agner <stefan@agner.ch> Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-06-03ARM: dts: rockchip: fix pinctrl sub nodename for spi in rk322x.dtsiJohan Jonker1-2/+2
[ Upstream commit 855bdca1781c79eb661f89c8944c4a719ce720e8 ] A test with the command below gives these errors: arch/arm/boot/dts/rk3229-evb.dt.yaml: spi-0: '#address-cells' is a required property arch/arm/boot/dts/rk3229-evb.dt.yaml: spi-1: '#address-cells' is a required property arch/arm/boot/dts/rk3229-xms6.dt.yaml: spi-0: '#address-cells' is a required property arch/arm/boot/dts/rk3229-xms6.dt.yaml: spi-1: '#address-cells' is a required property The $nodename pattern for spi nodes is "^spi(@.*|-[0-9a-f])*$". To prevent warnings rename 'spi-0' and 'spi-1' pinctrl sub nodenames to 'spi0' and 'spi1' in 'rk322x.dtsi'. make ARCH=arm dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/spi/spi-controller.yaml Signed-off-by: Johan Jonker <jbx6244@gmail.com> Link: https://lore.kernel.org/r/20200424123923.8192-1-jbx6244@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-06-03arm64: dts: rockchip: swap interrupts interrupt-names rk3399 gpu nodeJohan Jonker1-4/+4
[ Upstream commit c604fd810bda667bdc20b2c041917baa7803e0fb ] Dts files with Rockchip rk3399 'gpu' nodes were manually verified. In order to automate this process arm,mali-midgard.txt has been converted to yaml. In the new setup dtbs_check with arm,mali-midgard.yaml expects interrupts and interrupt-names values in the same order. Fix this for rk3399. make ARCH=arm64 dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/gpu/ arm,mali-midgard.yaml Signed-off-by: Johan Jonker <jbx6244@gmail.com> Link: https://lore.kernel.org/r/20200425143837.18706-1-jbx6244@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-06-03ARM: dts: rockchip: fix phy nodename for rk3228-evbJohan Jonker1-1/+1
[ Upstream commit 287e0d538fcec2f6e8eb1e565bf0749f3b90186d ] A test with the command below gives for example this error: arch/arm/boot/dts/rk3228-evb.dt.yaml: phy@0: '#phy-cells' is a required property The phy nodename is normally used by a phy-handle. This node is however compatible with "ethernet-phy-id1234.d400", "ethernet-phy-ieee802.3-c22" which is just been added to 'ethernet-phy.yaml'. So change nodename to 'ethernet-phy' for which '#phy-cells' is not a required property make ARCH=arm dtbs_check DT_SCHEMA_FILES=~/.local/lib/python3.5/site-packages/dtschema/schemas/ phy/phy-provider.yaml Signed-off-by: Johan Jonker <jbx6244@gmail.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://lore.kernel.org/r/20200416170321.4216-1-jbx6244@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-05-27x86/unwind/orc: Fix unwind_get_return_address_ptr() for inactive tasksJosh Poimboeuf1-0/+7
commit 187b96db5ca79423618dfa29a05c438c34f9e1f0 upstream. Normally, show_trace_log_lvl() scans the stack, looking for text addresses to print. In parallel, it unwinds the stack with unwind_next_frame(). If the stack address matches the pointer returned by unwind_get_return_address_ptr() for the current frame, the text address is printed normally without a question mark. Otherwise it's considered a breadcrumb (potentially from a previous call path) and it's printed with a question mark to indicate that the address is unreliable and typically can be ignored. Since the following commit: f1d9a2abff66 ("x86/unwind/orc: Don't skip the first frame for inactive tasks") ... for inactive tasks, show_trace_log_lvl() prints *only* unreliable addresses (prepended with '?'). That happens because, for the first frame of an inactive task, unwind_get_return_address_ptr() returns the wrong return address pointer: one word *below* the task stack pointer. show_trace_log_lvl() starts scanning at the stack pointer itself, so it never finds the first 'reliable' address, causing only guesses to being printed. The first frame of an inactive task isn't a normal stack frame. It's actually just an instance of 'struct inactive_task_frame' which is left behind by __switch_to_asm(). Now that this inactive frame is actually exposed to callers, fix unwind_get_return_address_ptr() to interpret it properly. Fixes: f1d9a2abff66 ("x86/unwind/orc: Don't skip the first frame for inactive tasks") Reported-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20200522135435.vbxs7umku5pyrdbk@treble Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-27powerpc/64s: Disable STRICT_KERNEL_RWXMichael Ellerman1-1/+1
[ Upstream commit 8659a0e0efdd975c73355dbc033f79ba3b31e82c ] Several strange crashes have been eventually traced back to STRICT_KERNEL_RWX and its interaction with code patching. Various paths in our ftrace, kprobes and other patching code need to be hardened against patching failures, otherwise we can end up running with partially/incorrectly patched ftrace paths, kprobes or jump labels, which can then cause strange crashes. Although fixes for those are in development, they're not -rc material. There also seem to be problems with the underlying strict RWX logic, which needs further debugging. So for now disable STRICT_KERNEL_RWX on 64-bit to prevent people from enabling the option and tripping over the bugs. Fixes: 1e0fc9d1eb2b ("powerpc/Kconfig: Enable STRICT_KERNEL_RWX for some configs") Cc: stable@vger.kernel.org # v4.13+ Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200520133605.972649-1-mpe@ellerman.id.au Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-05-27powerpc: Remove STRICT_KERNEL_RWX incompatibility with RELOCATABLERussell Currey1-1/+1
[ Upstream commit c55d7b5e64265fdca45c85b639013e770bde2d0e ] I have tested this with the Radix MMU and everything seems to work, and the previous patch for Hash seems to fix everything too. STRICT_KERNEL_RWX should still be disabled by default for now. Please test STRICT_KERNEL_RWX + RELOCATABLE! Signed-off-by: Russell Currey <ruscur@russell.cc> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20191224064126.183670-2-ruscur@russell.cc Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-05-27powerpc: restore alphabetic order in KconfigChristophe Leroy1-2/+2
[ Upstream commit 4ec591e51a4b0aedb6c7f1a8cd722aa58d7f61ba ] This patch restores the alphabetic order which was broken by commit 1e0fc9d1eb2b0 ("powerpc/Kconfig: Enable STRICT_KERNEL_RWX for some configs") Fixes: 1e0fc9d1eb2b0 ("powerpc/Kconfig: Enable STRICT_KERNEL_RWX for some configs") Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Acked-by: Balbir Singh <bsingharora@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-05-27arm64: fix the flush_icache_range arguments in machine_kexecChristoph Hellwig1-1/+2
Commit d51c214541c5154dda3037289ee895ea3ded5ebd upstream. The second argument is the end "pointer", not the length. Fixes: d28f6df1305a ("arm64/kexec: Add core kexec support") Cc: <stable@vger.kernel.org> # 4.8.x- Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-05-27ARM: futex: Address build warningThomas Gleixner1-2/+7
[ Upstream commit 8101b5a1531f3390b3a69fa7934c70a8fd6566ad ] Stephen reported the following build warning on a ARM multi_v7_defconfig build with GCC 9.2.1: kernel/futex.c: In function 'do_futex': kernel/futex.c:1676:17: warning: 'oldval' may be used uninitialized in this function [-Wmaybe-uninitialized] 1676 | return oldval == cmparg; | ~~~~~~~^~~~~~~~~ kernel/futex.c:1652:6: note: 'oldval' was declared here 1652 | int oldval, ret; | ^~~~~~ introduced by commit a08971e9488d ("futex: arch_futex_atomic_op_inuser() calling conventions change"). While that change should not make any difference it confuses GCC which fails to work out that oldval is not referenced when the return value is not zero. GCC fails to properly analyze arch_futex_atomic_op_inuser(). It's not the early return, the issue is with the assembly macros. GCC fails to detect that those either set 'ret' to 0 and set oldval or set 'ret' to -EFAULT which makes oldval uninteresting. The store to the callsite supplied oldval pointer is conditional on ret == 0. The straight forward way to solve this is to make the store unconditional. Aside of addressing the build warning this makes sense anyway because it removes the conditional from the fastpath. In the error case the stored value is uninteresting and the extra store does not matter at all. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/87pncao2ph.fsf@nanos.tec.linutronix.de Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-05-27x86/apic: Move TSC deadline timer debug printkThomas Gleixner1-13/+14
[ Upstream commit c84cb3735fd53c91101ccdb191f2e3331a9262cb ] Leon reported that the printk_once() in __setup_APIC_LVTT() triggers a lockdep splat due to a lock order violation between hrtimer_base::lock and console_sem, when the 'once' condition is reset via /sys/kernel/debug/clear_warn_once after boot. The initial printk cannot trigger this because that happens during boot when the local APIC timer is set up on the boot CPU. Prevent it by moving the printk to a place which is guaranteed to be only called once during boot. Mark the deadline timer check related functions and data __init while at it. Reported-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/87y2qhoshi.fsf@nanos.tec.linutronix.de Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-05-20KVM: x86: Fix off-by-one error in kvm_vcpu_ioctl_x86_setup_mceJim Mattson1-1/+1
commit c4e0e4ab4cf3ec2b3f0b628ead108d677644ebd9 upstream. Bank_num is a one-based count of banks, not a zero-based index. It overflows the allocated space only when strictly greater than KVM_MAX_MCE_BANKS. Fixes: a9e38c3e01ad ("KVM: x86: Catch potential overrun in MCE setup") Signed-off-by: Jue Wang <juew@google.com> Signed-off-by: Jim Mattson <jmattson@google.com> Reviewed-by: Peter Shier <pshier@google.com> Message-Id: <20200511225616.19557-1-jmattson@google.com> Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-20ARM: dts: r8a7740: Add missing extal2 to CPG nodeGeert Uytterhoeven1-1/+1
commit e47cb97f153193d4b41ca8d48127da14513d54c7 upstream. The Clock Pulse Generator (CPG) device node lacks the extal2 clock. This may lead to a failure registering the "r" clock, or to a wrong parent for the "usb24s" clock, depending on MD_CK2 pin configuration and boot loader CPG_USBCKCR register configuration. This went unnoticed, as this does not affect the single upstream board configuration, which relies on the first clock input only. Fixes: d9ffd583bf345e2e ("ARM: shmobile: r8a7740: add SoC clocks to DTS") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu> Link: https://lore.kernel.org/r/20200508095918.6061-1-geert+renesas@glider.be Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-20ARM: dts: r8a73a4: Add missing CMT1 interruptsGeert Uytterhoeven1-1/+8
commit 0f739fdfe9e5ce668bd6d3210f310df282321837 upstream. The R-Mobile APE6 Compare Match Timer 1 generates 8 interrupts, one for each channel, but currently only 1 is described. Fix this by adding the missing interrupts. Fixes: f7b65230019b9dac ("ARM: shmobile: r8a73a4: Add CMT1 node") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20200408090926.25201-1-geert+renesas@glider.be Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-20arm64: dts: rockchip: Rename dwc3 device nodes on rk3399 to make dtc happyChen-Yu Tsai1-2/+2
commit 190c7f6fd43a776d4a6da1dac44408104649e9b7 upstream. The device tree compiler complains that the dwc3 nodes have regs properties but no matching unit addresses. Add the unit addresses to the device node name. While at it, also rename the nodes from "dwc3" to "usb", as guidelines require device nodes have generic names. Fixes: 7144224f2c2b ("arm64: dts: rockchip: support dwc3 USB for rk3399") Signed-off-by: Chen-Yu Tsai <wens@csie.org> Link: https://lore.kernel.org/r/20200327030414.5903-7-wens@kernel.org Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-20arm64: dts: rockchip: Replace RK805 PMIC node name with "pmic" on rk3328 boardsChen-Yu Tsai2-2/+2
commit 83b994129fb4c18a8460fd395864a28740e5e7fb upstream. In some board device tree files, "rk805" was used for the RK805 PMIC's node name. However the policy for device trees is that generic names should be used. Replace the "rk805" node name with the generic "pmic" name. Fixes: 1e28037ec88e ("arm64: dts: rockchip: add rk805 node for rk3328-evb") Fixes: 955bebde057e ("arm64: dts: rockchip: add rk3328-rock64 board") Signed-off-by: Chen-Yu Tsai <wens@csie.org> Link: https://lore.kernel.org/r/20200327030414.5903-3-wens@kernel.org Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-20x86/unwind/orc: Fix error handling in __unwind_start()Josh Poimboeuf1-7/+9
commit 71c95825289f585014fe9741b051d32a7a916680 upstream. The unwind_state 'error' field is used to inform the reliable unwinding code that the stack trace can't be trusted. Set this field for all errors in __unwind_start(). Also, move the zeroing out of the unwind_state struct to before the ORC table initialization check, to prevent the caller from reading uninitialized data if the ORC table is corrupted. Fixes: af085d9084b4 ("stacktrace/x86: add function for detecting reliable stack traces") Fixes: d3a09104018c ("x86/unwinder/orc: Dont bail on stack overflow") Fixes: 98d0c8ebf77e ("x86/unwind/orc: Prevent unwinding before ORC initialization") Reported-by: Pavel Machek <pavel@denx.de> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/d6ac7215a84ca92b895fdd2e1aa546729417e6e6.1589487277.git.jpoimboe@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-20x86: Fix early boot crash on gcc-10, third tryBorislav Petkov3-1/+15
commit a9a3ed1eff3601b63aea4fb462d8b3b92c7c1e7e upstream. ... or the odyssey of trying to disable the stack protector for the function which generates the stack canary value. The whole story started with Sergei reporting a boot crash with a kernel built with gcc-10: Kernel panic — not syncing: stack-protector: Kernel stack is corrupted in: start_secondary CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.6.0-rc5—00235—gfffb08b37df9 #139 Hardware name: Gigabyte Technology Co., Ltd. To be filled by O.E.M./H77M—D3H, BIOS F12 11/14/2013 Call Trace: dump_stack panic ? start_secondary __stack_chk_fail start_secondary secondary_startup_64 -—-[ end Kernel panic — not syncing: stack—protector: Kernel stack is corrupted in: start_secondary This happens because gcc-10 tail-call optimizes the last function call in start_secondary() - cpu_startup_entry() - and thus emits a stack canary check which fails because the canary value changes after the boot_init_stack_canary() call. To fix that, the initial attempt was to mark the one function which generates the stack canary with: __attribute__((optimize("-fno-stack-protector"))) ... start_secondary(void *unused) however, using the optimize attribute doesn't work cumulatively as the attribute does not add to but rather replaces previously supplied optimization options - roughly all -fxxx options. The key one among them being -fno-omit-frame-pointer and thus leading to not present frame pointer - frame pointer which the kernel needs. The next attempt to prevent compilers from tail-call optimizing the last function call cpu_startup_entry(), shy of carving out start_secondary() into a separate compilation unit and building it with -fno-stack-protector, was to add an empty asm(""). This current solution was short and sweet, and reportedly, is supported by both compilers but we didn't get very far this time: future (LTO?) optimization passes could potentially eliminate this, which leads us to the third attempt: having an actual memory barrier there which the compiler cannot ignore or move around etc. That should hold for a long time, but hey we said that about the other two solutions too so... Reported-by: Sergei Trofimovich <slyfox@gentoo.org> Signed-off-by: Borislav Petkov <bp@suse.de> Tested-by: Kalle Valo <kvalo@codeaurora.org> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/20200314164451.346497-1-slyfox@gentoo.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-20ARM: dts: imx27-phytec-phycard-s-rdk: Fix the I2C1 pinctrl entriesFabio Estevam1-2/+2
commit 0caf34350a25907515d929a9c77b9b206aac6d1e upstream. The I2C2 pins are already used and the following errors are seen: imx27-pinctrl 10015000.iomuxc: pin MX27_PAD_I2C2_SDA already requested by 10012000.i2c; cannot claim for 1001d000.i2c imx27-pinctrl 10015000.iomuxc: pin-69 (1001d000.i2c) status -22 imx27-pinctrl 10015000.iomuxc: could not request pin 69 (MX27_PAD_I2C2_SDA) from group i2c2grp on device 10015000.iomuxc imx-i2c 1001d000.i2c: Error applying setting, reverse things back imx-i2c: probe of 1001d000.i2c failed with error -22 Fix it by adding the correct I2C1 IOMUX entries for the pinctrl_i2c1 group. Cc: <stable@vger.kernel.org> Fixes: 61664d0b432a ("ARM: dts: imx27 phyCARD-S pinctrl") Signed-off-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Stefan Riedmueller <s.riedmueller@phytec.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-20ARM: dts: dra7: Fix bus_dma_limit for PCIeKishon Vijay Abraham I1-2/+2
commit 90d4d3f4ea45370d482fa609dbae4d2281b4074f upstream. Even though commit cfb5d65f2595 ("ARM: dts: dra7: Add bus_dma_limit for L3 bus") added bus_dma_limit for L3 bus, the PCIe controller gets incorrect value of bus_dma_limit. Fix it by adding empty dma-ranges property to axi@0 and axi@1 (parent device tree node of PCIe controller). Cc: stable@kernel.org Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-20x86/asm: Add instruction suffixes to bitopsJan Beulich2-14/+17
commit 22636f8c9511245cb3c8412039f1dd95afb3aa59 upstream. Omitting suffixes from instructions in AT&T mode is bad practice when operand size cannot be determined by the assembler from register operands, and is likely going to be warned about by upstream gas in the future (mine does already). Add the missing suffixes here. Note that for 64-bit this means some operations change from being 32-bit to 64-bit. Signed-off-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/5A93F98702000078001ABACC@prv-mh.provo.novell.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-20x86/entry/64: Fix unwind hints in register clearing codeJosh Poimboeuf1-17/+21
[ Upstream commit 06a9750edcffa808494d56da939085c35904e618 ] The PUSH_AND_CLEAR_REGS macro zeroes each register immediately after pushing it. If an NMI or exception hits after a register is cleared, but before the UNWIND_HINT_REGS annotation, the ORC unwinder will wrongly think the previous value of the register was zero. This can confuse the unwinding process and cause it to exit early. Because ORC is simpler than DWARF, there are a limited number of unwind annotation states, so it's not possible to add an individual unwind hint after each push/clear combination. Instead, the register clearing instructions need to be consolidated and moved to after the UNWIND_HINT_REGS annotation. Fixes: 3f01daecd545 ("x86/entry/64: Introduce the PUSH_AND_CLEAN_REGS macro") Reviewed-by: Miroslav Benes <mbenes@suse.cz> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Dave Jones <dsj@fb.com> Cc: Jann Horn <jannh@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Link: https://lore.kernel.org/r/68fd3d0bc92ae2d62ff7879d15d3684217d51f08.1587808742.git.jpoimboe@redhat.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-05-20x86/unwind/orc: Fix error path for bad ORC entry typeJosh Poimboeuf1-1/+1
commit a0f81bf26888048100bf017fadf438a5bdffa8d8 upstream. If the ORC entry type is unknown, nothing else can be done other than reporting an error. Exit the function instead of breaking out of the switch statement. Fixes: ee9f8fce9964 ("x86/unwind: Add the ORC unwinder") Reviewed-by: Miroslav Benes <mbenes@suse.cz> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Dave Jones <dsj@fb.com> Cc: Jann Horn <jannh@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Link: https://lore.kernel.org/r/a7fa668ca6eabbe81ab18b2424f15adbbfdc810a.1587808742.git.jpoimboe@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-20x86/unwind/orc: Prevent unwinding before ORC initializationJosh Poimboeuf1-3/+3
commit 98d0c8ebf77e0ba7c54a9ae05ea588f0e9e3f46e upstream. If the unwinder is called before the ORC data has been initialized, orc_find() returns NULL, and it tries to fall back to using frame pointers. This can cause some unexpected warnings during boot. Move the 'orc_init' check from orc_find() to __unwind_init(), so that it doesn't even try to unwind from an uninitialized state. Fixes: ee9f8fce9964 ("x86/unwind: Add the ORC unwinder") Reviewed-by: Miroslav Benes <mbenes@suse.cz> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Dave Jones <dsj@fb.com> Cc: Jann Horn <jannh@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Link: https://lore.kernel.org/r/069d1499ad606d85532eb32ce39b2441679667d5.1587808742.git.jpoimboe@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-20x86/unwind/orc: Don't skip the first frame for inactive tasksMiroslav Benes1-1/+1
commit f1d9a2abff66aa8156fbc1493abed468db63ea48 upstream. When unwinding an inactive task, the ORC unwinder skips the first frame by default. If both the 'regs' and 'first_frame' parameters of unwind_start() are NULL, 'state->sp' and 'first_frame' are later initialized to the same value for an inactive task. Given there is a "less than or equal to" comparison used at the end of __unwind_start() for skipping stack frames, the first frame is skipped. Drop the equal part of the comparison and make the behavior equivalent to the frame pointer unwinder. Fixes: ee9f8fce9964 ("x86/unwind: Add the ORC unwinder") Reviewed-by: Miroslav Benes <mbenes@suse.cz> Signed-off-by: Miroslav Benes <mbenes@suse.cz> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Dave Jones <dsj@fb.com> Cc: Jann Horn <jannh@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Link: https://lore.kernel.org/r/7f08db872ab59e807016910acdbe82f744de7065.1587808742.git.jpoimboe@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-20x86/entry/64: Fix unwind hints in rewind_stack_do_exit()Jann Horn1-1/+1
commit f977df7b7ca45a4ac4b66d30a8931d0434c394b1 upstream. The LEAQ instruction in rewind_stack_do_exit() moves the stack pointer directly below the pt_regs at the top of the task stack before calling do_exit(). Tell the unwinder to expect pt_regs. Fixes: 8c1f75587a18 ("x86/entry/64: Add unwind hint annotations") Reviewed-by: Miroslav Benes <mbenes@suse.cz> Signed-off-by: Jann Horn <jannh@google.com> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Dave Jones <dsj@fb.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Link: https://lore.kernel.org/r/68c33e17ae5963854916a46f522624f8e1d264f2.1587808742.git.jpoimboe@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-20x86/entry/64: Fix unwind hints in kernel exit pathJosh Poimboeuf1-1/+2
commit 1fb143634a38095b641a3a21220774799772dc4c upstream. In swapgs_restore_regs_and_return_to_usermode, after the stack is switched to the trampoline stack, the existing UNWIND_HINT_REGS hint is no longer valid, which can result in the following ORC unwinder warning: WARNING: can't dereference registers at 000000003aeb0cdd for ip swapgs_restore_regs_and_return_to_usermode+0x93/0xa0 For full correctness, we could try to add complicated unwind hints so the unwinder could continue to find the registers, but when when it's this close to kernel exit, unwind hints aren't really needed anymore and it's fine to just use an empty hint which tells the unwinder to stop. For consistency, also move the UNWIND_HINT_EMPTY in entry_SYSCALL_64_after_hwframe to a similar location. Fixes: 3e3b9293d392 ("x86/entry/64: Return to userspace from the trampoline stack") Reported-by: Vince Weaver <vincent.weaver@maine.edu> Reported-by: Dave Jones <dsj@fb.com> Reported-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reported-by: Joe Mario <jmario@redhat.com> Reported-by: Jann Horn <jannh@google.com> Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Reviewed-by: Miroslav Benes <mbenes@suse.cz> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/60ea8f562987ed2d9ace2977502fe481c0d7c9a0.1587808742.git.jpoimboe@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-10s390/ftrace: fix potential crashes when switching tracersPhilipp Rudo3-4/+4
[ Upstream commit 8ebf6da9db1b2a20bb86cc1bee2552e894d03308 ] Switching tracers include instruction patching. To prevent that a instruction is patched while it's read the instruction patching is done in stop_machine 'context'. This also means that any function called during stop_machine must not be traced. Thus add 'notrace' to all functions called within stop_machine. Fixes: 1ec2772e0c3c ("s390/diag: add a statistic for diagnose calls") Fixes: 38f2c691a4b3 ("s390: improve wait logic of stop_machine") Fixes: 4ecf0a43e729 ("processor: get rid of cpu_relax_yield") Signed-off-by: Philipp Rudo <prudo@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-05-10powerpc/pci/of: Parse unassigned resourcesAlexey Kardashevskiy1-2/+10
commit dead1c845dbe97e0061dae2017eaf3bd8f8f06ee upstream. The pseries platform uses the PCI_PROBE_DEVTREE method of PCI probing which reads "assigned-addresses" of every PCI device and initializes the device resources. However if the property is missing or zero sized, then there is no fallback of any kind and the PCI resources remain undiscovered, i.e. pdev->resource[] array remains empty. This adds a fallback which parses the "reg" property in pretty much same way except it marks resources as "unset" which later make Linux assign those resources proper addresses. This has an effect when: 1. a hypervisor failed to assign any resource for a device; 2. /chosen/linux,pci-probe-only=0 is in the DT so the system may try assigning a resource. Neither is likely to happen under PowerVM. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-02arm64: Delete the space separator in __emit_instFangrui Song1-1/+3
[ Upstream commit c9a4ef66450145a356a626c833d3d7b1668b3ded ] In assembly, many instances of __emit_inst(x) expand to a directive. In a few places __emit_inst(x) is used as an assembler macro argument. For example, in arch/arm64/kvm/hyp/entry.S ALTERNATIVE(nop, SET_PSTATE_PAN(1), ARM64_HAS_PAN, CONFIG_ARM64_PAN) expands to the following by the C preprocessor: alternative_insn nop, .inst (0xd500401f | ((0) << 16 | (4) << 5) | ((!!1) << 8)), 4, 1 Both comma and space are separators, with an exception that content inside a pair of parentheses/quotes is not split, so the clang integrated assembler splits the arguments to: nop, .inst, (0xd500401f | ((0) << 16 | (4) << 5) | ((!!1) << 8)), 4, 1 GNU as preprocesses the input with do_scrub_chars(). Its arm64 backend (along with many other non-x86 backends) sees: alternative_insn nop,.inst(0xd500401f|((0)<<16|(4)<<5)|((!!1)<<8)),4,1 # .inst(...) is parsed as one argument while its x86 backend sees: alternative_insn nop,.inst (0xd500401f|((0)<<16|(4)<<5)|((!!1)<<8)),4,1 # The extra space before '(' makes the whole .inst (...) parsed as two arguments The non-x86 backend's behavior is considered unintentional (https://sourceware.org/bugzilla/show_bug.cgi?id=25750). So drop the space separator inside `.inst (...)` to make the clang integrated assembler work. Suggested-by: Ilie Halip <ilie.halip@gmail.com> Signed-off-by: Fangrui Song <maskray@google.com> Reviewed-by: Mark Rutland <mark.rutland@arm.com> Link: https://github.com/ClangBuiltLinux/linux/issues/939 Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-05-02x86: hyperv: report value of misc_featuresOlaf Hering1-2/+2
[ Upstream commit 97d9f1c43bedd400301d6f1eff54d46e8c636e47 ] A few kernel features depend on ms_hyperv.misc_features, but unlike its siblings ->features and ->hints, the value was never reported during boot. Signed-off-by: Olaf Hering <olaf@aepfle.de> Link: https://lore.kernel.org/r/20200407172739.31371-1-olaf@aepfle.de Signed-off-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-05-02bpf, x86: Fix encoding for lower 8-bit registers in BPF_STX BPF_BLuke Nelson1-3/+15
[ Upstream commit aee194b14dd2b2bde6252b3acf57d36dccfc743a ] This patch fixes an encoding bug in emit_stx for BPF_B when the source register is BPF_REG_FP. The current implementation for BPF_STX BPF_B in emit_stx saves one REX byte when the operands can be encoded using Mod-R/M alone. The lower 8 bits of registers %rax, %rbx, %rcx, and %rdx can be accessed without using a REX prefix via %al, %bl, %cl, and %dl, respectively. Other registers, (e.g., %rsi, %rdi, %rbp, %rsp) require a REX prefix to use their 8-bit equivalents (%sil, %dil, %bpl, %spl). The current code checks if the source for BPF_STX BPF_B is BPF_REG_1 or BPF_REG_2 (which map to %rdi and %rsi), in which case it emits the required REX prefix. However, it misses the case when the source is BPF_REG_FP (mapped to %rbp). The result is that BPF_STX BPF_B with BPF_REG_FP as the source operand will read from register %ch instead of the correct %bpl. This patch fixes the problem by fixing and refactoring the check on which registers need the extra REX byte. Since no BPF registers map to %rsp, there is no need to handle %spl. Fixes: 622582786c9e0 ("net: filter: x86: internal BPF JIT") Signed-off-by: Xi Wang <xi.wang@gmail.com> Signed-off-by: Luke Nelson <luke.r.nels@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200418232655.23870-1-luke.r.nels@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-05-02ARM: dts: bcm283x: Disable dsi0 nodeNicolas Saenz Julienne1-0/+1
commit 90444b958461a5f8fc299ece0fe17eab15cba1e1 upstream. Since its inception the module was meant to be disabled by default, but the original commit failed to add the relevant property. Fixes: 4aba4cf82054 ("ARM: dts: bcm2835: Add the DSI module nodes and clocks") Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Reviewed-by: Eric Anholt <eric@anholt.net> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-02powerpc/setup_64: Set cache-line-size based on cache-block-sizeChris Packham1-0/+2
commit 94c0b013c98583614e1ad911e8795ca36da34a85 upstream. If {i,d}-cache-block-size is set and {i,d}-cache-line-size is not, use the block-size value for both. Per the devicetree spec cache-line-size is only needed if it differs from the block size. Originally the code would fallback from block size to line size. An error message was printed if both properties were missing. Later the code was refactored to use clearer names and logic but it inadvertently made line size a required property, meaning on systems without a line size property we fall back to the default from the cputable. On powernv (OPAL) platforms, since the introduction of device tree CPU features (5a61ef74f269 ("powerpc/64s: Support new device tree binding for discovering CPU features")), that has led to the wrong value being used, as the fallback value is incorrect for Power8/Power9 CPUs. The incorrect values flow through to the VDSO and also to the sysconf values, SC_LEVEL1_ICACHE_LINESIZE etc. Fixes: bd067f83b084 ("powerpc/64: Fix naming of cache block vs. cache line") Cc: stable@vger.kernel.org # v4.11+ Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Reported-by: Qian Cai <cai@lca.pw> [mpe: Add even more detail to change log] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200416221908.7886-1-chris.packham@alliedtelesis.co.nz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-02ARM: imx: provide v7_cpu_resume() only on ARM_CPU_SUSPEND=yAhmad Fatoum1-0/+2
commit f1baca8896ae18e12c45552a4c4ae2086aa7e02c upstream. 512a928affd5 ("ARM: imx: build v7_cpu_resume() unconditionally") introduced an unintended linker error for i.MX6 configurations that have ARM_CPU_SUSPEND=n which can happen if neither CONFIG_PM, CONFIG_CPU_IDLE, nor ARM_PSCI_FW are selected. Fix this by having v7_cpu_resume() compiled only when cpu_resume() it calls is available as well. The C declaration for the function remains unguarded to avoid future code inadvertently using a stub and introducing a regression to the bug the original commit fixed. Cc: <stable@vger.kernel.org> Fixes: 512a928affd5 ("ARM: imx: build v7_cpu_resume() unconditionally") Reported-by: Clemens Gruber <clemens.gruber@pqgruber.com> Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Tested-by: Roland Hieber <rhi@pengutronix.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-02KVM: VMX: Enable machine check support for 32bit targetsUros Bizjak1-1/+1
commit fb56baae5ea509e63c2a068d66a4d8ea91969fca upstream. There is no reason to limit the use of do_machine_check to 64bit targets. MCE handling works for both target familes. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Sean Christopherson <sean.j.christopherson@intel.com> Cc: stable@vger.kernel.org Fixes: a0861c02a981 ("KVM: Add VT-x machine check support") Signed-off-by: Uros Bizjak <ubizjak@gmail.com> Message-Id: <20200414071414.45636-1-ubizjak@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-24x86: ACPI: fix CPU hotplug deadlockQian Cai1-1/+2
[ Upstream commit 696ac2e3bf267f5a2b2ed7d34e64131f2287d0ad ] Similar to commit 0266d81e9bf5 ("acpi/processor: Prevent cpu hotplug deadlock") except this is for acpi_processor_ffh_cstate_probe(): "The problem is that the work is scheduled on the current CPU from the hotplug thread associated with that CPU. It's not required to invoke these functions via the workqueue because the hotplug thread runs on the target CPU already. Check whether current is a per cpu thread pinned on the target CPU and invoke the function directly to avoid the workqueue." WARNING: possible circular locking dependency detected ------------------------------------------------------ cpuhp/1/15 is trying to acquire lock: ffffc90003447a28 ((work_completion)(&wfc.work)){+.+.}-{0:0}, at: __flush_work+0x4c6/0x630 but task is already holding lock: ffffffffafa1c0e8 (cpuidle_lock){+.+.}-{3:3}, at: cpuidle_pause_and_lock+0x17/0x20 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (cpu_hotplug_lock){++++}-{0:0}: cpus_read_lock+0x3e/0xc0 irq_calc_affinity_vectors+0x5f/0x91 __pci_enable_msix_range+0x10f/0x9a0 pci_alloc_irq_vectors_affinity+0x13e/0x1f0 pci_alloc_irq_vectors_affinity at drivers/pci/msi.c:1208 pqi_ctrl_init+0x72f/0x1618 [smartpqi] pqi_pci_probe.cold.63+0x882/0x892 [smartpqi] local_pci_probe+0x7a/0xc0 work_for_cpu_fn+0x2e/0x50 process_one_work+0x57e/0xb90 worker_thread+0x363/0x5b0 kthread+0x1f4/0x220 ret_from_fork+0x27/0x50 -> #0 ((work_completion)(&wfc.work)){+.+.}-{0:0}: __lock_acquire+0x2244/0x32a0 lock_acquire+0x1a2/0x680 __flush_work+0x4e6/0x630 work_on_cpu+0x114/0x160 acpi_processor_ffh_cstate_probe+0x129/0x250 acpi_processor_evaluate_cst+0x4c8/0x580 acpi_processor_get_power_info+0x86/0x740 acpi_processor_hotplug+0xc3/0x140 acpi_soft_cpu_online+0x102/0x1d0 cpuhp_invoke_callback+0x197/0x1120 cpuhp_thread_fun+0x252/0x2f0 smpboot_thread_fn+0x255/0x440 kthread+0x1f4/0x220 ret_from_fork+0x27/0x50 other info that might help us debug this: Chain exists of: (work_completion)(&wfc.work) --> cpuhp_state-up --> cpuidle_lock Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(cpuidle_lock); lock(cpuhp_state-up); lock(cpuidle_lock); lock((work_completion)(&wfc.work)); *** DEADLOCK *** 3 locks held by cpuhp/1/15: #0: ffffffffaf51ab10 (cpu_hotplug_lock){++++}-{0:0}, at: cpuhp_thread_fun+0x69/0x2f0 #1: ffffffffaf51ad40 (cpuhp_state-up){+.+.}-{0:0}, at: cpuhp_thread_fun+0x69/0x2f0 #2: ffffffffafa1c0e8 (cpuidle_lock){+.+.}-{3:3}, at: cpuidle_pause_and_lock+0x17/0x20 Call Trace: dump_stack+0xa0/0xea print_circular_bug.cold.52+0x147/0x14c check_noncircular+0x295/0x2d0 __lock_acquire+0x2244/0x32a0 lock_acquire+0x1a2/0x680 __flush_work+0x4e6/0x630 work_on_cpu+0x114/0x160 acpi_processor_ffh_cstate_probe+0x129/0x250 acpi_processor_evaluate_cst+0x4c8/0x580 acpi_processor_get_power_info+0x86/0x740 acpi_processor_hotplug+0xc3/0x140 acpi_soft_cpu_online+0x102/0x1d0 cpuhp_invoke_callback+0x197/0x1120 cpuhp_thread_fun+0x252/0x2f0 smpboot_thread_fn+0x255/0x440 kthread+0x1f4/0x220 ret_from_fork+0x27/0x50 Signed-off-by: Qian Cai <cai@lca.pw> Tested-by: Borislav Petkov <bp@suse.de> [ rjw: Subject ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-04-24KVM: s390: vsie: Fix possible race when shadowing region 3 tablesDavid Hildenbrand1-0/+1
[ Upstream commit 1493e0f944f3c319d11e067c185c904d01c17ae5 ] We have to properly retry again by returning -EINVAL immediately in case somebody else instantiated the table concurrently. We missed to add the goto in this function only. The code now matches the other, similar shadowing functions. We are overwriting an existing region 2 table entry. All allocated pages are added to the crst_list to be freed later, so they are not lost forever. However, when unshadowing the region 2 table, we wouldn't trigger unshadowing of the original shadowed region 3 table that we replaced. It would get unshadowed when the original region 3 table is modified. As it's not connected to the page table hierarchy anymore, it's not going to get used anymore. However, for a limited time, this page table will stick around, so it's in some sense a temporary memory leak. Identified by manual code inspection. I don't think this classifies as stable material. Fixes: 998f637cc4b9 ("s390/mm: avoid races on region/segment/page table shadowing") Signed-off-by: David Hildenbrand <david@redhat.com> Link: https://lore.kernel.org/r/20200403153050.20569-4-david@redhat.com Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-04-24powerpc/maple: Fix declaration made after definitionNathan Chancellor1-17/+17
[ Upstream commit af6cf95c4d003fccd6c2ecc99a598fb854b537e7 ] When building ppc64 defconfig, Clang errors (trimmed for brevity): arch/powerpc/platforms/maple/setup.c:365:1: error: attribute declaration must precede definition [-Werror,-Wignored-attributes] machine_device_initcall(maple, maple_cpc925_edac_setup); ^ machine_device_initcall expands to __define_machine_initcall, which in turn has the macro machine_is used in it, which declares mach_##name with an __attribute__((weak)). define_machine actually defines mach_##name, which in this file happens before the declaration, hence the warning. To fix this, move define_machine after machine_device_initcall so that the declaration occurs before the definition, which matches how machine_device_initcall and define_machine work throughout arch/powerpc. While we're here, remove some spaces before tabs. Fixes: 8f101a051ef0 ("edac: cpc925 MC platform device setup") Reported-by: Nick Desaulniers <ndesaulniers@google.com> Suggested-by: Ilie Halip <ilie.halip@gmail.com> Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200323222729.15365-1-natechancellor@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-04-24s390/cpuinfo: fix wrong output when CPU0 is offlineAlexander Gordeev1-1/+4
[ Upstream commit 872f27103874a73783aeff2aac2b41a489f67d7c ] /proc/cpuinfo should not print information about CPU 0 when it is offline. Fixes: 281eaa8cb67c ("s390/cpuinfo: simplify locking and skip offline cpus early") Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com> Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> [heiko.carstens@de.ibm.com: shortened commit message] Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-04-24arm64: traps: Don't print stack or raw PC/LR values in backtracesWill Deacon2-67/+6
[ Upstream commit a25ffd3a6302a67814280274d8f1aa4ae2ea4b59 ] Printing raw pointer values in backtraces has potential security implications and are of questionable value anyway. This patch follows x86's lead and removes the "Exception stack:" dump from kernel backtraces, as well as converting PC/LR values to symbols such as "sysrq_handle_crash+0x20/0x30". Tested-by: Laura Abbott <labbott@redhat.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-24arm64: perf: remove unsupported events for Cortex-A73Xu YiPing1-6/+0
[ Upstream commit f8ada189550984ee21f27be736042b74a7da1d68 ] bus access read/write events are not supported in A73, based on the Cortex-A73 TRM r0p2, section 11.9 Events (pages 11-457 to 11-460). Fixes: 5561b6c5e981 "arm64: perf: add support for Cortex-A73" Acked-by: Julien Thierry <julien.thierry@arm.com> Signed-off-by: Xu YiPing <xuyiping@hisilicon.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-24arm, bpf: Fix bugs with ALU64 {RSH, ARSH} BPF_K shift by 0Luke Nelson1-2/+10
commit bb9562cf5c67813034c96afb50bd21130a504441 upstream. The current arm BPF JIT does not correctly compile RSH or ARSH when the immediate shift amount is 0. This causes the "rsh64 by 0 imm" and "arsh64 by 0 imm" BPF selftests to hang the kernel by reaching an instruction the verifier determines to be unreachable. The root cause is in how immediate right shifts are encoded on arm. For LSR and ASR (logical and arithmetic right shift), a bit-pattern of 00000 in the immediate encodes a shift amount of 32. When the BPF immediate is 0, the generated code shifts by 32 instead of the expected behavior (a no-op). This patch fixes the bugs by adding an additional check if the BPF immediate is 0. After the change, the above mentioned BPF selftests pass. Fixes: 39c13c204bb11 ("arm: eBPF JIT compiler") Co-developed-by: Xi Wang <xi.wang@gmail.com> Signed-off-by: Xi Wang <xi.wang@gmail.com> Signed-off-by: Luke Nelson <luke.r.nels@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20200408181229.10909-1-luke.r.nels@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-24x86/resctrl: Fix invalid attempt at removing the default resource groupReinette Chatre1-1/+2
commit b0151da52a6d4f3951ea24c083e7a95977621436 upstream. The default resource group ("rdtgroup_default") is associated with the root of the resctrl filesystem and should never be removed. New resource groups can be created as subdirectories of the resctrl filesystem and they can be removed from user space. There exists a safeguard in the directory removal code (rdtgroup_rmdir()) that ensures that only subdirectories can be removed by testing that the directory to be removed has to be a child of the root directory. A possible deadlock was recently fixed with 334b0f4e9b1b ("x86/resctrl: Fix a deadlock due to inaccurate reference"). This fix involved associating the private data of the "mon_groups" and "mon_data" directories to the resource group to which they belong instead of NULL as before. A consequence of this change was that the original safeguard code preventing removal of "mon_groups" and "mon_data" found in the root directory failed resulting in attempts to remove the default resource group that ends in a BUG: kernel BUG at mm/slub.c:3969! invalid opcode: 0000 [#1] SMP PTI Call Trace: rdtgroup_rmdir+0x16b/0x2c0 kernfs_iop_rmdir+0x5c/0x90 vfs_rmdir+0x7a/0x160 do_rmdir+0x17d/0x1e0 do_syscall_64+0x55/0x1d0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fix this by improving the directory removal safeguard to ensure that subdirectories of the resctrl root directory can only be removed if they are a child of the resctrl filesystem's root _and_ not associated with the default resource group. Fixes: 334b0f4e9b1b ("x86/resctrl: Fix a deadlock due to inaccurate reference") Reported-by: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Tested-by: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/884cbe1773496b5dbec1b6bd11bb50cffa83603d.1584461853.git.reinette.chatre@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>