| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
On Radxa A5E board, the EMAC0 connect to external Maxio MAE0621A PHY,
which features a 25MHz crystal, and using PH8 pin as PHY reset.
Tested on A5E board with schematic V1.20.
Tested-by: Corentin LABBE <clabbe.montjoie@gmail.com>
Signed-off-by: Yixun Lan <dlan@gentoo.org>
Link: https://patch.msgid.link/20250430-01-sun55i-emac0-v3-4-6fc000bbccbd@gentoo.org
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
|
|
Add EMAC0 ethernet MAC support which found on A523 variant SoCs,
including the A527/T527 chips. MAC0 is compatible to the A64 chip which
requires an external PHY. This patch only add RGMII pins for now.
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Tested-by: Corentin LABBE <clabbe.montjoie@gmail.com>
Signed-off-by: Yixun Lan <dlan@gentoo.org>
Link: https://patch.msgid.link/20250430-01-sun55i-emac0-v3-3-6fc000bbccbd@gentoo.org
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
|
|
For am65x, add missing ITAPDLYSEL values for Default Speed and High
Speed SDR modes to sdhci0 node according to the device datasheet [0].
[0] https://www.ti.com/lit/gpn/am6548
Fixes: eac99d38f861 ("arm64: dts: ti: k3-am654-main: Update otap-del-sel values")
Cc: stable@vger.kernel.org
Signed-off-by: Judith Mendez <jm@ti.com>
Reviewed-by: Moteen Shah <m-shah@ti.com>
Link: https://lore.kernel.org/r/20250429173009.33994-1-jm@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
|
|
Set eMMC clock parents to the defaults which is MAIN_PLL0_HSDIV5_CLKOUT
for eMMC. This change is necessary since DM is not implementing the
correct procedure to switch PLL clock source for eMMC and MMC CLK mux is
not glich-free. As a preventative action, lets switch back to the defaults.
Fixes: b5080c7c1f7e ("arm64: dts: ti: k3-am62p: Add nodes for more IPs")
Cc: stable@vger.kernel.org
Signed-off-by: Judith Mendez <jm@ti.com>
Acked-by: Udit Kumar <u-kumar1@ti.com>
Acked-by: Bryan Brattlof <bb@ti.com>
Link: https://lore.kernel.org/r/20250429163337.15634-4-jm@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
|
|
Set eMMC clock parents to the defaults which is MAIN_PLL0_HSDIV5_CLKOUT
for eMMC. This change is necessary since DM is not implementing the
correct procedure to switch PLL clock source for eMMC and MMC CLK mux is
not glich-free. As a preventative action, lets switch back to the defaults.
Fixes: d3ae4e8d8b6a ("arm64: dts: ti: k3-am62a-main: Add sdhci0 instance")
Cc: stable@vger.kernel.org
Signed-off-by: Judith Mendez <jm@ti.com>
Acked-by: Udit Kumar <u-kumar1@ti.com>
Acked-by: Bryan Brattlof <bb@ti.com>
Link: https://lore.kernel.org/r/20250429163337.15634-3-jm@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
|
|
Set eMMC clock parents to the defaults which is MAIN_PLL0_HSDIV5_CLKOUT
for eMMC. This change is necessary since DM is not implementing the
correct procedure to switch PLL clock source for eMMC and MMC CLK mux is
not glich-free. As a preventative action, lets switch back to the defaults.
Fixes: c37c58fdeb8a ("arm64: dts: ti: k3-am62: Add more peripheral nodes")
Cc: stable@vger.kernel.org
Signed-off-by: Judith Mendez <jm@ti.com>
Acked-by: Udit Kumar <u-kumar1@ti.com>
Acked-by: Bryan Brattlof <bb@ti.com>
Link: https://lore.kernel.org/r/20250429163337.15634-2-jm@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
|
|
Add support for Verdin AM62P mated with Verdin Ivy carrier board.
Link: https://www.toradex.com/computer-on-modules/verdin-arm-family/ti-am62p
Link: https://www.toradex.com/products/carrier-board/ivy-carrier-board
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Link: https://lore.kernel.org/r/20250430102815.149162-7-francesco@dolcini.it
Signed-off-by: Nishanth Menon <nm@ti.com>
|
|
Add support for Verdin AM62P mated with Verdin Yavia carrier board.
Link: https://www.toradex.com/computer-on-modules/verdin-arm-family/ti-am62p
Link: https://www.toradex.com/products/carrier-board/yavia
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Link: https://lore.kernel.org/r/20250430102815.149162-6-francesco@dolcini.it
Signed-off-by: Nishanth Menon <nm@ti.com>
|
|
Add support for Verdin AM62P mated with Verdin Mallow carrier board.
Link: https://www.toradex.com/computer-on-modules/verdin-arm-family/ti-am62p
Link: https://www.toradex.com/products/carrier-board/mallow-carrier-board
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Link: https://lore.kernel.org/r/20250430102815.149162-5-francesco@dolcini.it
Signed-off-by: Nishanth Menon <nm@ti.com>
|
|
Add support for Verdin AM62P mated with Verdin Dahlia carrier board.
Link: https://www.toradex.com/computer-on-modules/verdin-arm-family/ti-am62p
Link: https://www.toradex.com/products/carrier-board/dahlia-carrier-board-kit
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Link: https://lore.kernel.org/r/20250430102815.149162-4-francesco@dolcini.it
Signed-off-by: Nishanth Menon <nm@ti.com>
|
|
Add support for Toradex Verdin AM62P computer on module which can be
used on different carrier boards and for the Toradex Verdin Development
Board carrier board.
The module consists of an TI AM62P family SoC, a TPS65219 PMIC, a
Gigabit Ethernet PHY, up to 8GB of LPDDR4 RAM, an eMMC, a TLA2024 ADC,
an I2C EEPROM, an RX8130 RTC, plus an optional Bluetooth/Wi-Fi module.
Anything that is not self-contained on the module is disabled by
default.
Link: https://www.toradex.com/computer-on-modules/verdin-arm-family/ti-am62p
Link: https://www.toradex.com/products/carrier-board/verdin-development-board-kit
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Link: https://lore.kernel.org/r/20250430102815.149162-3-francesco@dolcini.it
Signed-off-by: Nishanth Menon <nm@ti.com>
|
|
The PCIe reference clock required by the PCIe Endpoints connected to the
PCIe connector corresponding to the PCIe1 instance of PCIe on J784S4-EVM
and J742S2-EVM is driven by the ACSPCIE0 module. Add the device-tree
support for enabling the same.
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Reviewed-by: Udit Kumar <u-kumar1@ti.com>
Link: https://lore.kernel.org/r/20250422123218.3788223-3-s-vadapalli@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
|
|
The ACSPCIE0 module on TI's J784S4 SoC is capable of driving the
reference clock required by the PCIe Endpoint device. It is an
alternative to on-board and external reference clock generators.
Add the device-tree node for the same.
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Reviewed-by: Udit Kumar <u-kumar1@ti.com>
Link: https://lore.kernel.org/r/20250422123218.3788223-2-s-vadapalli@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
|
|
for PCIe0 and PCIe1
The PCIe0 and PCIe1 instances of PCIe in J742S2 and J784S4 SoCs support:
1. 128 MB address region in the 32-bit address space
2. 4 GB address region in the 64-bit address space
The default configuration is that of a 128 MB address region in the
32-bit address space. While this might be sufficient for most use-cases,
it is insufficient for supporting use-cases which require larger address
spaces. Therefore, switch to using the 64-bit address space with a 4 GB
address region.
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Reviewed-by: Udit Kumar <u-kumar1@ti.com>
Link: https://lore.kernel.org/r/20250422120042.3746004-8-s-vadapalli@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
|
|
The PCIe0 instance of PCIe in J722S SoC supports:
1. 128 MB address region in the 32-bit address space
2. 4 GB address region in the 64-bit address space
The default configuration is that of a 128 MB address region in the
32-bit address space. While this might be sufficient for most use-cases,
it is insufficient for supporting use-cases which require larger address
spaces. Therefore, switch to using the 64-bit address space with a 4 GB
address region.
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Reviewed-by: Udit Kumar <u-kumar1@ti.com>
Link: https://lore.kernel.org/r/20250422120042.3746004-7-s-vadapalli@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
|
|
The PCIe1 instance of PCIe in J721S2 SoC supports:
1. 128 MB address region in the 32-bit address space
2. 4 GB address region in the 64-bit address space
The default configuration is that of a 128 MB address region in the
32-bit address space. While this might be sufficient for most use-cases,
it is insufficient for supporting use-cases which require larger address
spaces. Therefore, switch to using the 64-bit address space with a 4 GB
address region.
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Reviewed-by: Udit Kumar <u-kumar1@ti.com>
Link: https://lore.kernel.org/r/20250422120042.3746004-6-s-vadapalli@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
|
|
PCIe1
The PCIe0 and PCIe1 instances of PCIe in J721E SoC support:
1. 128 MB address region in the 32-bit address space
2. 4 GB address region in the 64-bit address space
The default configuration is that of a 128 MB address region in the
32-bit address space. While this might be sufficient for most use-cases,
it is insufficient for supporting use-cases which require larger address
spaces. Therefore, switch to using the 64-bit address space with a 4 GB
address region.
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Reviewed-by: Udit Kumar <u-kumar1@ti.com>
Link: https://lore.kernel.org/r/20250422120042.3746004-5-s-vadapalli@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
|
|
The PCIe0 DAT1 and PCIe1 DAT1 are 4 GB address regions in the 64-bit
address space of the respective PCIe Controllers. Hence, update the
ranges to include them.
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Reviewed-by: Udit Kumar <u-kumar1@ti.com>
Link: https://lore.kernel.org/r/20250422120042.3746004-4-s-vadapalli@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
|
|
The PCIe0 instance of PCIe in J7200 SoC supports:
1. 128 MB address region in the 32-bit address space
2. 4 GB address region in the 64-bit address space
The default configuration is that of a 128 MB address region in the
32-bit address space. While this might be sufficient for most use-cases,
it is insufficient for supporting use-cases which require larger address
spaces. Therefore, switch to using the 64-bit address space with a 4 GB
address region.
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Reviewed-by: Udit Kumar <u-kumar1@ti.com>
Link: https://lore.kernel.org/r/20250422120042.3746004-3-s-vadapalli@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
|
|
The PCIe0 instance of PCIe in AM64 SoC supports:
1. 128 MB address region in the 32-bit address space
2. 4 GB address region in the 64-bit address space
The default configuration is that of a 128 MB address region in the
32-bit address space. While this might be sufficient for most use-cases,
it is insufficient for supporting use-cases which require larger address
spaces. Therefore, switch to using the 64-bit address space with a 4 GB
address region.
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Reviewed-by: Udit Kumar <u-kumar1@ti.com>
Link: https://lore.kernel.org/r/20250422120042.3746004-2-s-vadapalli@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
|
|
AM642-SK uses TPIC2810 I2C GPIO expander for LEDs.
Link: https://lore.kernel.org/r/20250421143926.2009535-1-nm@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
|
|
Remove disable-wp flag for eMMC nodes since this flag is
only applicable to SD according to the binding doc
(mmc/mmc-controller-common.yaml).
For eMMC, this flag should be ignored but lets remove
anyways to cleanup sdhci nodes.
Signed-off-by: Judith Mendez <jm@ti.com>
Reviewed-by: Moteen Shah <m-shah@ti.com>
Link: https://lore.kernel.org/r/20250429151454.4160506-4-jm@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
|
|
EMMC device is non-removable so add 'non-removable' DT
property to avoid having to redetect the eMMC after
suspend/resume.
Signed-off-by: Judith Mendez <jm@ti.com>
Reviewed-by: Udit Kumar <u-kumar1@ti.com>
Link: https://lore.kernel.org/r/20250429151454.4160506-3-jm@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
|
|
The bootph-all flag was introduced in dt-schema
(dtschema/schemas/bootph.yaml) to define node usage across
different boot phases.
For eMMC and SD boot modes, voltage regulator nodes, io-expander
nodes, gpio nodes, and MMC nodes need to be present in all boot
stages, so add missing bootph-all phase flag to these nodes to
support SD boot and eMMC boot.
Signed-off-by: Judith Mendez <jm@ti.com>
Reviewed-by: Moteen Shah <m-shah@ti.com>
Link: https://lore.kernel.org/r/20250429151454.4160506-2-jm@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
|
|
Modify the function type of native_read_msr_safe() to:
int native_read_msr_safe(u32 msr, u64 *val)
This change makes the function return an error code instead of the
MSR value, aligning it with the type of native_write_msr_safe().
Consequently, their callers can check the results in the same way.
While at it, convert leftover MSR data type "unsigned int" to u32.
Signed-off-by: Xin Li (Intel) <xin@zytor.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Uros Bizjak <ubizjak@gmail.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20250427092027.1598740-16-xin@zytor.com
|
|
The third argument in wrmsr(msr, low, 0) is unnecessary. Instead, use
wrmsrq(msr, low), which automatically sets the higher 32 bits of the
MSR value to 0.
Signed-off-by: Xin Li (Intel) <xin@zytor.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Uros Bizjak <ubizjak@gmail.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20250427092027.1598740-15-xin@zytor.com
|
|
An MSR value is represented as a 64-bit unsigned integer, with existing
MSR instructions storing it in EDX:EAX as two 32-bit segments.
The new immediate form MSR instructions, however, utilize a 64-bit
general-purpose register to store the MSR value. To unify the usage of
all MSR instructions, let the default MSR access APIs accept an MSR
value as a single 64-bit argument instead of two 32-bit segments.
The dual 32-bit APIs are still available as convenient wrappers over the
APIs that handle an MSR value as a single 64-bit argument.
The following illustrates the updated derivation of the MSR write APIs:
__wrmsrq(u32 msr, u64 val)
/ \
/ \
native_wrmsrq(msr, val) native_wrmsr(msr, low, high)
|
|
native_write_msr(msr, val)
/ \
/ \
wrmsrq(msr, val) wrmsr(msr, low, high)
When CONFIG_PARAVIRT is enabled, wrmsrq() and wrmsr() are defined on top
of paravirt_write_msr():
paravirt_write_msr(u32 msr, u64 val)
/ \
/ \
wrmsrq(msr, val) wrmsr(msr, low, high)
paravirt_write_msr() invokes cpu.write_msr(msr, val), an indirect layer
of pv_ops MSR write call:
If on native:
cpu.write_msr = native_write_msr
If on Xen:
cpu.write_msr = xen_write_msr
Therefore, refactor pv_cpu_ops.write_msr{_safe}() to accept an MSR value
in a single u64 argument, replacing the current dual u32 arguments.
No functional change intended.
Signed-off-by: Xin Li (Intel) <xin@zytor.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Juergen Gross <jgross@suse.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Uros Bizjak <ubizjak@gmail.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20250427092027.1598740-14-xin@zytor.com
|
|
set_seg() is used to write the following MSRs on Xen:
MSR_FS_BASE
MSR_KERNEL_GS_BASE
MSR_GS_BASE
But none of these MSRs are written using any MSR write safe API.
Therefore there is no need to pass an error pointer argument to
set_seg() for returning an error code to be used in MSR safe APIs.
Remove the error pointer argument.
Signed-off-by: Xin Li (Intel) <xin@zytor.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Juergen Gross <jgross@suse.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Uros Bizjak <ubizjak@gmail.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20250427092027.1598740-13-xin@zytor.com
|
|
As pmu_msr_{read,write}() are now wrappers of pmu_msr_chk_emulated(),
remove them and use pmu_msr_chk_emulated() directly.
As pmu_msr_chk_emulated() could easily return false in the cases where
it would set *emul to false, remove the "emul" argument and use the
return value instead.
While at it, convert the data type of MSR index to u32 in functions
called in pmu_msr_chk_emulated().
Suggested-by: H. Peter Anvin (Intel) <hpa@zytor.com>
Suggested-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Xin Li (Intel) <xin@zytor.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Juergen Gross <jgross@suse.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Uros Bizjak <ubizjak@gmail.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20250427092027.1598740-12-xin@zytor.com
|
|
pmu_msr_{read,write}()
hpa found that pmu_msr_write() is actually a completely pointless
function:
https://lore.kernel.org/lkml/0ec48b84-d158-47c6-b14c-3563fd14bcc4@zytor.com/
all it does is shuffle some arguments, then calls pmu_msr_chk_emulated()
and if it returns true AND the emulated flag is clear then does
*exactly the same thing* that the calling code would have done if
pmu_msr_write() itself had returned true.
And pmu_msr_read() does the equivalent stupidity.
Remove the calls to native_{read,write}_msr{,_safe}() within
pmu_msr_{read,write}(). Instead reuse the existing calling code
that decides whether to call native_{read,write}_msr{,_safe}() based
on the return value from pmu_msr_{read,write}(). Consequently,
eliminate the need to pass an error pointer to pmu_msr_{read,write}().
While at it, refactor pmu_msr_write() to take the MSR value as a u64
argument, replacing the current dual u32 arguments, because the dual
u32 arguments were only used to call native_write_msr{,_safe}(), which
has now been removed.
Suggested-by: H. Peter Anvin (Intel) <hpa@zytor.com>
Signed-off-by: Xin Li (Intel) <xin@zytor.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Juergen Gross <jgross@suse.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Uros Bizjak <ubizjak@gmail.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20250427092027.1598740-11-xin@zytor.com
|
|
__rdmsr() is the lowest level MSR write API, with native_rdmsr()
and native_rdmsrq() serving as higher-level wrappers around it.
#define native_rdmsr(msr, val1, val2) \
do { \
u64 __val = __rdmsr((msr)); \
(void)((val1) = (u32)__val); \
(void)((val2) = (u32)(__val >> 32)); \
} while (0)
static __always_inline u64 native_rdmsrq(u32 msr)
{
return __rdmsr(msr);
}
However, __rdmsr() continues to be utilized in various locations.
MSR APIs are designed for different scenarios, such as native or
pvops, with or without trace, and safe or non-safe. Unfortunately,
the current MSR API names do not adequately reflect these factors,
making it challenging to select the most appropriate API for
various situations.
To pave the way for improving MSR API names, convert __rdmsr()
uses to native_rdmsrq() to ensure consistent usage. Later, these
APIs can be renamed to better reflect their implications, such as
native or pvops, with or without trace, and safe or non-safe.
No functional change intended.
Signed-off-by: Xin Li (Intel) <xin@zytor.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Uros Bizjak <ubizjak@gmail.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20250427092027.1598740-10-xin@zytor.com
|
|
__rdmsr() is the lowest-level primitive MSR read API, implemented in
assembly code and returning an MSR value in a u64 integer, on top of
which a convenience wrapper native_rdmsr() is defined to return an MSR
value in two u32 integers. For some reason, native_rdmsrq() is not
defined and __rdmsr() is directly used when it needs to return an MSR
value in a u64 integer.
Add the native_rdmsrq() helper, which is simply an alias of __rdmsr(),
to make native_rdmsr() and native_rdmsrq() a pair of MSR read APIs.
Signed-off-by: Xin Li (Intel) <xin@zytor.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Uros Bizjak <ubizjak@gmail.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20250427092027.1598740-9-xin@zytor.com
|
|
__wrmsr() is the lowest level MSR write API, with native_wrmsr()
and native_wrmsrq() serving as higher-level wrappers around it:
#define native_wrmsr(msr, low, high) \
__wrmsr(msr, low, high)
#define native_wrmsrl(msr, val) \
__wrmsr((msr), (u32)((u64)(val)), \
(u32)((u64)(val) >> 32))
However, __wrmsr() continues to be utilized in various locations.
MSR APIs are designed for different scenarios, such as native or
pvops, with or without trace, and safe or non-safe. Unfortunately,
the current MSR API names do not adequately reflect these factors,
making it challenging to select the most appropriate API for
various situations.
To pave the way for improving MSR API names, convert __wrmsr()
uses to native_wrmsr{,q}() to ensure consistent usage. Later,
these APIs can be renamed to better reflect their implications,
such as native or pvops, with or without trace, and safe or
non-safe.
No functional change intended.
Signed-off-by: Xin Li (Intel) <xin@zytor.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Uros Bizjak <ubizjak@gmail.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20250427092027.1598740-8-xin@zytor.com
|
|
The pv_ops PMC read API is defined as:
u64 (*read_pmc)(int counter);
But Xen PMC read functions return 'unsigned long long', make them
return u64 consistently.
Signed-off-by: Xin Li (Intel) <xin@zytor.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Juergen Gross <jgross@suse.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Uros Bizjak <ubizjak@gmail.com>
Link: https://lore.kernel.org/r/20250427092027.1598740-7-xin@zytor.com
|
|
Functions offer type safety and better readability compared to macros.
Additionally, always inline functions can match the performance of
macros. Converting the rdpmc() macro into an always inline function
is simple and straightforward, so just make the change.
Moreover, the read result is now the returned value, further enhancing
readability.
Signed-off-by: Xin Li (Intel) <xin@zytor.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Uros Bizjak <ubizjak@gmail.com>
Link: https://lore.kernel.org/r/20250427092027.1598740-6-xin@zytor.com
|
|
Now that rdpmc() is gone, rdpmcl() is the sole PMC read helper,
simply rename rdpmcl() to rdpmc().
Signed-off-by: Xin Li (Intel) <xin@zytor.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Uros Bizjak <ubizjak@gmail.com>
Link: https://lore.kernel.org/r/20250427092027.1598740-5-xin@zytor.com
|
|
rdpmc() is not used anywhere anymore, remove it.
Signed-off-by: Xin Li (Intel) <xin@zytor.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Uros Bizjak <ubizjak@gmail.com>
Link: https://lore.kernel.org/r/20250427092027.1598740-4-xin@zytor.com
|
|
Relocate rdtsc{,_ordered}() from <asm/msr.h> to <asm/tsc.h>.
[ mingo: Do not remove the <asm/tsc.h> inclusion from <asm/msr.h>
just yet, to reduce -next breakages. We can do this later
on, separately, shortly before the next -rc1. ]
Signed-off-by: Xin Li (Intel) <xin@zytor.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Uros Bizjak <ubizjak@gmail.com>
Link: https://lore.kernel.org/r/20250427092027.1598740-3-xin@zytor.com
|
|
For historic reasons there are some TSC-related functions in the
<asm/msr.h> header, even though there's an <asm/tsc.h> header.
To facilitate the relocation of rdtsc{,_ordered}() from <asm/msr.h>
to <asm/tsc.h> and to eventually eliminate the inclusion of
<asm/msr.h> in <asm/tsc.h>, add an explicit <asm/msr.h> dependency
to the source files that reference definitions from <asm/msr.h>.
[ mingo: Clarified the changelog. ]
Signed-off-by: Xin Li (Intel) <xin@zytor.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Uros Bizjak <ubizjak@gmail.com>
Link: https://lore.kernel.org/r/20250501054241.1245648-1-xin@zytor.com
|
|
We are going to use them from multiple headers, and in any case,
such register access wrapper macros are better in <asm/asm.h>
anyway.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Uros Bizjak <ubizjak@gmail.com>
Cc: linux-kernel@vger.kernel.org
|
|
DECLARE_ARGS() is way too generic of a name that says very little about
why these args are declared in that fashion - use the EAX_EDX_ prefix
to create a common prefix between the three helper methods:
EAX_EDX_DECLARE_ARGS()
EAX_EDX_VAL()
EAX_EDX_RET()
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Uros Bizjak <ubizjak@gmail.com>
Cc: linux-kernel@vger.kernel.org
|
|
DECLARE_ARGS()/EAX_EDX_VAL()/EAX_EDX_RET() facility
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Uros Bizjak <ubizjak@gmail.com>
Cc: linux-kernel@vger.kernel.org
|
|
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Fix the following build warning:
usr/include/asm/papr-platform-dump.h:12: found __[us]{8,16,32,64} type without #include <linux/types.h>
Fixes: 8aa9efc0be66 ("powerpc/pseries: Add papr-platform-dump character driver for dump retrieval")
Closes: https://lore.kernel.org/linux-next/20250429185735.034ba678@canb.auug.org.au/
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
[Maddy: fixed the commit to combine tags together]
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250429211419.1081354-1-haren@linux.ibm.com
|
|
Cross-merge networking fixes after downstream PR (net-6.15-rc5).
No conflicts or adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Bluetooth is available on the other Panda board versions, too, so move
stuff to common and specify the needed clock properly.
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/r/20250427052735.88133-3-andreas@kemnade.info
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
|
|
The Pandaboard needs a 32k clock in the TWL6030 to be enabled
for Wifi to work.
With some luck, it is enabled by some U-Boot fork.
Do not rely on it and properly specify the requirement.
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/r/20250427052735.88133-2-andreas@kemnade.info
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
|
|
Commit a5951389e58d ("arm64: errata: Add newer ARM cores to the
spectre_bhb_loop_affected() lists") added some additional CPUs to the
Spectre-BHB workaround, including some new arrays for designs that
require new 'k' values for the workaround to be effective.
Unfortunately, the new arrays omitted the sentinel entry and so
is_midr_in_range_list() will walk off the end when it doesn't find a
match. With UBSAN enabled, this leads to a crash during boot when
is_midr_in_range_list() is inlined (which was more common prior to
c8c2647e69be ("arm64: Make _midr_in_range_list() an exported
function")):
| Internal error: aarch64 BRK: 00000000f2000001 [#1] PREEMPT SMP
| pstate: 804000c5 (Nzcv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
| pc : spectre_bhb_loop_affected+0x28/0x30
| lr : is_spectre_bhb_affected+0x170/0x190
| [...]
| Call trace:
| spectre_bhb_loop_affected+0x28/0x30
| update_cpu_capabilities+0xc0/0x184
| init_cpu_features+0x188/0x1a4
| cpuinfo_store_boot_cpu+0x4c/0x60
| smp_prepare_boot_cpu+0x38/0x54
| start_kernel+0x8c/0x478
| __primary_switched+0xc8/0xd4
| Code: 6b09011f 54000061 52801080 d65f03c0 (d4200020)
| ---[ end trace 0000000000000000 ]---
| Kernel panic - not syncing: aarch64 BRK: Fatal exception
Add the missing sentinel entries.
Cc: Lee Jones <lee@kernel.org>
Cc: James Morse <james.morse@arm.com>
Cc: Doug Anderson <dianders@chromium.org>
Cc: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Cc: <stable@vger.kernel.org>
Reported-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes: a5951389e58d ("arm64: errata: Add newer ARM cores to the spectre_bhb_loop_affected() lists")
Signed-off-by: Will Deacon <will@kernel.org>
Reviewed-by: Lee Jones <lee@kernel.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250501104747.28431-1-will@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
17 years ago, Venki suggested [1] "A future improvement would be to
avoid the range_is_allowed duplication".
The only thing preventing a common implementation is that
phys_mem_access_prot_allowed() expects the range check to exit
immediately when PAT is disabled [2]. I.e. there is no cache conflict to
manage in that case. This cleanup was noticed on the path to
considering changing range_is_allowed() policy to blanket deny /dev/mem
for private (confidential computing) memory.
Note, however that phys_mem_access_prot_allowed() has long since stopped
being relevant for managing cache-type validation due to [3], and [4].
Commit 0124cecfc85a ("x86, PAT: disable /dev/mem mmap RAM with PAT") [1]
Commit 9e41bff2708e ("x86: fix /dev/mem mmap breakage when PAT is disabled") [2]
Commit 1886297ce0c8 ("x86/mm/pat: Fix BUG_ON() in mmap_mem() on QEMU/i386") [3]
Commit 0c3c8a18361a ("x86, PAT: Remove duplicate memtype reserve in devmem mmap") [4]
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Nikolay Borisov <nik.borisov@suse.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/all/20250430024622.1134277-2-dan.j.williams%40intel.com
|
|
The USB-C port on the NanoPC-T6 was not providing VBUS (vbus5v0_typec
regulator disabled, gpio-58 out lo) due to misconfiguration. The
original setup with regulator-always-on and regulator-boot-on forced
the port on, masking the issue, but removing these properties revealed
that the fusb302 driver was not enabling the regulator dynamically.
Changes:
- Removed regulator-always-on and regulator-boot-on from vbus5v0_typec
and vbus5v0_usb to allow driver control.
- Changed power-role from "source" to "dual" in the usb-c-connector to
support OTG functionality.
- Added pd-revision = /bits/ 8 <0x2 0x0 0x1 0x2> to the FUSB302MPX
node to specify USB Power Delivery (PD) Revision 2.0, Version 1.2,
ensuring the driver correctly advertises PD capabilities and
negotiates power roles (source/sink).
- Added op-sink-microwatt and sink-pdos for proper sink mode
configuration (1W min, 15W max).
- Added typec-power-opmode = "1.5A" to enable 1.5A fallback for non-PD
USB-C devices, aligning with the 5V/2A hardware limit.
- Set try-power-role to "source" to prioritize VBUS enablement.
- Adjusted usb_host0_xhci dr_mode from "host" to "otg" and added
usb-role-switch for dual-role support.
Testing:
- Verified VBUS (5V) delivery to a sink device (USB thumb drive).
- Confirmed USB host mode with lsusb detecting connected devices.
- Validated USB device mode with adb devices when connected to a PC.
- Tested dual-role (OTG) functionality with try-power-role set to
"source" and "sink"; "source" prioritizes faster VBUS activation.
- Validated functionality with a mobile device, including USB Power
Delivery, file transfer, USB tethering, MIDI, and image transfer.
- Tested USB-C Ethernet adapter compatibility in host mode.
- Tested USB-C hub compatibility in host mode.
Signed-off-by: John Clark <inindev@gmail.com>
Link: https://lore.kernel.org/r/20250422210345.196050-1-inindev@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
