summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)AuthorFilesLines
2012-01-09MIPS: BCM63XX: use the new bcm63xxpart parserJonas Gorski1-0/+3
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Acked-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-12-23sparc64: Fix MSIQ HV call ordering in pci_sun4v_msiq_build_irq().David S. Miller1-2/+2
This silently was working for many years and stopped working on Niagara-T3 machines. We need to set the MSIQ to VALID before we can set it's state to IDLE. On Niagara-T3, setting the state to IDLE first was causing HV_EINVAL errors. The hypervisor documentation says, rather ambiguously, that the MSIQ must be "initialized" before one can set the state. I previously understood this to mean merely that a successful setconf() operation has been performed on the MSIQ, which we have done at this point. But it seems to also mean that it has been set VALID too. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds1-2/+2
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: net: Add a flow_cache_flush_deferred function ipv4: reintroduce route cache garbage collector net: have ipconfig not wait if no dev is available sctp: Do not account for sizeof(struct sk_buff) in estimated rwnd asix: new device id davinci-cpdma: fix locking issue in cpdma_chan_stop sctp: fix incorrect overflow check on autoclose r8169: fix Config2 MSIEnable bit setting. llc: llc_cmsg_rcv was getting called after sk_eat_skb. net: bpf_jit: fix an off-one bug in x86_64 cond jump target iwlwifi: update SCD BC table for all SCD queues Revert "Bluetooth: Revert: Fix L2CAP connection establishment" Bluetooth: Clear RFCOMM session timer when disconnecting last channel Bluetooth: Prevent uninitialized data access in L2CAP configuration iwlwifi: allow to switch to HT40 if not associated iwlwifi: tx_sync only on PAN context mwifiex: avoid double list_del in command cancel path ath9k: fix max phy rate at rate control init nfc: signedness bug in __nci_request() iwlwifi: do not set the sequence control bit is not needed
2011-12-20Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds2-8/+8
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, dumpstack: Fix code bytes breakage due to missing KERN_CONT
2011-12-20Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: oprofile: Fix uninitialized memory access when writing to writing to oprofilefs
2011-12-20Merge branch 'sh-fixes-for-linus' of git://github.com/pmundt/linux-shLinus Torvalds1-6/+10
* 'sh-fixes-for-linus' of git://github.com/pmundt/linux-sh: sh: fix build warning in board-sh7757lcr
2011-12-20Merge branch 'rmobile-fixes-for-linus' of git://github.com/pmundt/linux-shLinus Torvalds3-19/+139
* 'rmobile-fixes-for-linus' of git://github.com/pmundt/linux-sh: ARM: mach-shmobile: SH73A0 external Ethernet fix ARM: mach-shmobile: AG5EVM GIC Sparse IRQ fix ARM: mach-shmobile: Kota2 TPU LED platform data ARM: mach-shmobile: Kota2 GIC Sparse IRQ fix ARM: mach-shmobile: Kota2 PINT fix
2011-12-20x86, dumpstack: Fix code bytes breakage due to missing KERN_CONTClemens Ladisch2-8/+8
When printing the code bytes in show_registers(), the markers around the byte at the fault address could make the printk() format string look like a valid log level and facility code. This would prevent this byte from being printed and result in a spurious newline: [ 7555.765589] Code: 8b 32 e9 94 00 00 00 81 7d 00 ff 00 00 00 0f 87 96 00 00 00 48 8b 83 c0 00 00 00 44 89 e2 44 89 e6 48 89 df 48 8b 80 d8 02 00 00 [ 7555.765683] 8b 48 28 48 89 d0 81 e2 ff 0f 00 00 48 c1 e8 0c 48 c1 e0 04 Add KERN_CONT where needed, and elsewhere in show_registers() for consistency. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Link: http://lkml.kernel.org/r/4EEFA7AE.9020407@ladisch.de Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-12-20net: bpf_jit: fix an off-one bug in x86_64 cond jump targetMarkus Kötter1-2/+2
x86 jump instruction size is 2 or 5 bytes (near/long jump), not 2 or 6 bytes. In case a conditional jump is followed by a long jump, conditional jump target is one byte past the start of target instruction. Signed-off-by: Markus Kötter <nepenthesdev@gmail.com> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-19oprofile: Fix uninitialized memory access when writing to writing to oprofilefsRobert Richter1-1/+1
If oprofilefs_ulong_from_user() is called with count equals zero, *val remains unchanged. Depending on the implementation it might be uninitialized. Change oprofilefs_ulong_from_user()'s interface to return count on success. Thus, we are able to return early if count equals zero which avoids using *val uninitialized. Fixing all users of oprofilefs_ulong_ from_user(). This follows write syscall implementation when count is zero: "If count is zero ... [and if] no errors are detected, 0 will be returned without causing any other effect." (man 2 write) Reported-By: Mike Waychison <mikew@google.com> Signed-off-by: Robert Richter <robert.richter@amd.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: <stable@vger.kernel.org> Cc: oprofile-list <oprofile-list@lists.sourceforge.net> Link: http://lkml.kernel.org/r/20111219153830.GH16765@erda.amd.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-12-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparcLinus Torvalds3-9/+4
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: sparc32: Be less strict in matching %lo part of relocation. sbus: convert drivers/sbus/char/* to use module_platform_driver() bbc_i2c: Remove unneeded err variable sparc: Use kmemdup rather than duplicating its implementation
2011-12-16Merge branch 'fixes' of ↵Linus Torvalds11-13/+26
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: OMAP: rx51: fix USB ARM: OMAP: mcbsp: Fix possible memory corruption arm/imx: fix power button on imx51 babbage board ARM: imx: fix cpufreq build errors ARM: mx5: add __initconst for fec pdata MXC PWM: should active during DOZE/WAIT/DBG mode ARM: EXYNOS: Fix build error without CONFIG_LOCAL_TIMERS ARM: EXYNOS: Fix for stall in case of cpu hotplug or sleep ARM: S5PV210: Set 1000ns as PWM backlight period on SMDKV210 ARM: SAMSUNG: remove duplicated header include
2011-12-16Merge branch 'samsung-fixes-3' of ↵Olof Johansson3-4/+11
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into fixes
2011-12-16Merge branch 'fixes' of ↵Olof Johansson2-4/+4
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes
2011-12-16ARM: unwinder: fix bisection to find origin in .idx sectionUwe Kleine-König1-2/+2
The bisection implemented in unwind_find_origin() stopped to early. If there is only a single entry left to check the original code just took the end point as origin which might be wrong. This was introduced in commit de66a979012d ("ARM: 7187/1: fix unwinding for XIP kernels"). Reported-and-tested-by: Nick Bowler <nbowler@elliptictech.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-12-15Merge branch 'stable/for-linus-fixes-3.2' of ↵Linus Torvalds1-3/+15
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen * 'stable/for-linus-fixes-3.2' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xen/swiotlb: Use page alignment for early buffer allocation. xen: only limit memory map to maximum reservation for domain 0.
2011-12-15xen: only limit memory map to maximum reservation for domain 0.Ian Campbell1-3/+15
d312ae878b6a "xen: use maximum reservation to limit amount of usable RAM" clamped the total amount of RAM to the current maximum reservation. This is correct for dom0 but is not correct for guest domains. In order to boot a guest "pre-ballooned" (e.g. with memory=1G but maxmem=2G) in order to allow for future memory expansion the guest must derive max_pfn from the e820 provided by the toolstack and not the current maximum reservation (which can reflect only the current maximum, not the guest lifetime max). The existing algorithm already behaves this correctly if we do not artificially limit the maximum number of pages for the guest case. For a guest booted with maxmem=512, memory=128 this results in: [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: 0000000000000000 - 00000000000a0000 (usable) [ 0.000000] Xen: 00000000000a0000 - 0000000000100000 (reserved) -[ 0.000000] Xen: 0000000000100000 - 0000000008100000 (usable) -[ 0.000000] Xen: 0000000008100000 - 0000000020800000 (unusable) +[ 0.000000] Xen: 0000000000100000 - 0000000020800000 (usable) ... [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI not present or invalid. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) -[ 0.000000] last_pfn = 0x8100 max_arch_pfn = 0x1000000 +[ 0.000000] last_pfn = 0x20800 max_arch_pfn = 0x1000000 [ 0.000000] initial memory mapped : 0 - 027ff000 [ 0.000000] Base memory trampoline at [c009f000] 9f000 size 4096 -[ 0.000000] init_memory_mapping: 0000000000000000-0000000008100000 -[ 0.000000] 0000000000 - 0008100000 page 4k -[ 0.000000] kernel direct mapping tables up to 8100000 @ 27bb000-27ff000 +[ 0.000000] init_memory_mapping: 0000000000000000-0000000020800000 +[ 0.000000] 0000000000 - 0020800000 page 4k +[ 0.000000] kernel direct mapping tables up to 20800000 @ 26f8000-27ff000 [ 0.000000] xen: setting RW the range 27e8000 - 27ff000 [ 0.000000] 0MB HIGHMEM available. -[ 0.000000] 129MB LOWMEM available. -[ 0.000000] mapped low ram: 0 - 08100000 -[ 0.000000] low ram: 0 - 08100000 +[ 0.000000] 520MB LOWMEM available. +[ 0.000000] mapped low ram: 0 - 20800000 +[ 0.000000] low ram: 0 - 20800000 With this change "xl mem-set <domain> 512M" will successfully increase the guest RAM (by reducing the balloon). There is no change for dom0. Reported-and-Tested-by: George Shuklin <george.shuklin@gmail.com> Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Cc: stable@kernel.org Reviewed-by: David Vrabel <david.vrabel@citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-12-14sparc32: Be less strict in matching %lo part of relocation.David S. Miller1-2/+1
The "(insn & 0x01800000) != 0x01800000" test matches 'restore' but that is a legitimate place to see the %lo() part of a 32-bit symbol relocation, particularly in tail calls. Signed-off-by: David S. Miller <davem@davemloft.net> Tested-by: Sergei Trofimovich <slyfox@gentoo.org>
2011-12-14Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds7-94/+37
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: Revert "x86, efi: Calling __pa() with an ioremap()ed address is invalid" x86, efi: Make efi_call_phys_{prelog,epilog} CONFIG_RELOCATABLE-aware
2011-12-14ARM: OMAP: rx51: fix USBFelipe Contreras1-1/+1
Commit 10299e2e4e3ed3b16503d4e04edd48b33083f4e2 (ARM: RX-51: Enable isp1704 power on/off) added power management for isp1704. However, the transceiver should be powered on by default, otherwise USB doesn't work at all for networking during boot. All kernels after v3.0 are affected. Cc: stable@kernel.org Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com> Reviewed-by: Sebastian Reichel <sre@debian.org> [tony@atomide.com: updated comments] Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-12-13Merge branch 'fixes' of ↵Linus Torvalds5-66/+99
http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm * 'fixes' of http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm: ARM: 7204/1: arch/arm/kernel/setup.c: initialize arm_dma_zone_size earlier ARM: 7185/1: perf: don't assign platform_device on unsupported CPUs ARM: 7187/1: fix unwinding for XIP kernels ARM: 7186/1: fix Kconfig issue with PHYS_OFFSET and !MMU
2011-12-13Merge branch 'imx-fixes-for-arnd' of ↵Arnd Bergmann6-5/+11
git://git.pengutronix.de/git/imx/linux-2.6 into fixes
2011-12-12ARM: OMAP: mcbsp: Fix possible memory corruptionJarkko Nikula1-3/+3
Commits 09d28d ("ARM: OMAP: mcbsp: Start generalize omap2_mcbsp_set_clks_src") and 7bc0c4 ("ARM: OMAP: mcbsp: Start generalize signal muxing functions") incorrectly set two struct omap_mcbsp_platform_data fields after omap_device_build_ss and kfree calls. Fix this by moving these pdata assignments before those calls. Signed-off-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Reported-by: NeilBrown <neilb@suse.de> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-12-12Revert "x86, efi: Calling __pa() with an ioremap()ed address is invalid"Keith Packard6-48/+35
This hangs my MacBook Air at boot time; I get no console messages at all. I reverted this on top of -rc5 and my machine boots again. This reverts commit e8c7106280a305e1ff2a3a8a4dfce141469fb039. Signed-off-by: Matt Fleming <matt.fleming@intel.com> Signed-off-by: Keith Packard <keithp@keithp.com> Acked-by: H. Peter Anvin <hpa@zytor.com> Cc: Matthew Garrett <mjg@redhat.com> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Huang Ying <huang.ying.caritas@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Link: http://lkml.kernel.org/r/1321621751-3650-1-git-send-email-matt@console Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-12-12ARM: 7204/1: arch/arm/kernel/setup.c: initialize arm_dma_zone_size earlierArnaud Patard1-6/+6
arm_dma_zone_size is used by arm_bootmem_free() which is called by paging_init(). Thus it needs to be set before calling it. Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org> Acked-by: Nicolas Pitre <nico@linaro.org> Cc: stable@kernel.org Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-12-10x86, efi: Make efi_call_phys_{prelog,epilog} CONFIG_RELOCATABLE-awareMatt Fleming1-46/+2
efi_call_phys_prelog() sets up a 1:1 mapping of the physical address range in swapper_pg_dir. Instead of replacing then restoring entries in swapper_pg_dir we should be using initial_page_table which already contains the 1:1 mapping. It's safe to blindly switch back to swapper_pg_dir in the epilog because the physical EFI routines are only called before efi_enter_virtual_mode(), e.g. before any user processes have been forked. Therefore, we don't need to track which pgd was in %cr3 when we entered the prelog. The previous code actually contained a bug because it assumed that the kernel was loaded at a physical address within the first 8MB of ram, usually at 0x100000. However, this isn't the case with a CONFIG_RELOCATABLE=y kernel which could have been loaded anywhere in the physical address space. Also delete the ancient (and bogus) comments about the page table being restored after the lock is released. There is no locking. Cc: Matthew Garrett <mjg@redhat.com> Cc: Darrent Hart <dvhart@linux.intel.com> Signed-off-by: Matt Fleming <matt.fleming@intel.com> Link: http://lkml.kernel.org/r/1323346250.3894.74.camel@mfleming-mobl1.ger.corp.intel.com Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-12-10Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds8-44/+68
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, efi: Calling __pa() with an ioremap()ed address is invalid x86, hpet: Immediately disable HPET timer 1 if rtc irq is masked x86/intel_mid: Kconfig select fix x86/intel_mid: Fix the Kconfig for MID selection
2011-12-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tileLinus Torvalds7-21/+20
* git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile: arch/tile: use new generic {enable,disable}_percpu_irq() routines drivers/net/ethernet/tile: use skb_frag_page() API asm-generic/unistd.h: support new process_vm_{readv,write} syscalls arch/tile: fix double-free bug in homecache_free_pages() arch/tile: add a few #includes and an EXPORT to catch up with kernel changes.
2011-12-09Merge branch 'iommu/fixes' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu * 'iommu/fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: MAINTAINERS: Update amd-iommu F: patterns iommu/amd: Fix typo in kernel-parameters.txt iommu/msm: Fix compile error in mach-msm/devices-iommu.c Fix comparison using wrong pointer variable in dma debug code
2011-12-09thp: add compound tail page _mapcount when mappedYouquan Song1-0/+2
With the 3.2-rc kernel, IOMMU 2M pages in KVM works. But when I tried to use IOMMU 1GB pages in KVM, I encountered an oops and the 1GB page failed to be used. The root cause is that 1GB page allocation calls gup_huge_pud() while 2M page calls gup_huge_pmd. If compound pages are used and the page is a tail page, gup_huge_pmd() increases _mapcount to record tail page are mapped while gup_huge_pud does not do that. So when the mapped page is relesed, it will result in kernel oops because the page is not marked mapped. This patch add tail process for compound page in 1GB huge page which keeps the same process as 2M page. Reproduce like: 1. Add grub boot option: hugepagesz=1G hugepages=8 2. mount -t hugetlbfs -o pagesize=1G hugetlbfs /dev/hugepages 3. qemu-kvm -m 2048 -hda os-kvm.img -cpu kvm64 -smp 4 -mem-path /dev/hugepages -net none -device pci-assign,host=07:00.1 kernel BUG at mm/swap.c:114! invalid opcode: 0000 [#1] SMP Call Trace: put_page+0x15/0x37 kvm_release_pfn_clean+0x31/0x36 kvm_iommu_put_pages+0x94/0xb1 kvm_iommu_unmap_memslots+0x80/0xb6 kvm_assign_device+0xba/0x117 kvm_vm_ioctl_assigned_device+0x301/0xa47 kvm_vm_ioctl+0x36c/0x3a2 do_vfs_ioctl+0x49e/0x4e4 sys_ioctl+0x5a/0x7c system_call_fastpath+0x16/0x1b RIP put_compound_page+0xd4/0x168 Signed-off-by: Youquan Song <youquan.song@intel.com> Reviewed-by: Andrea Arcangeli <aarcange@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-12-09arm/imx: fix power button on imx51 babbage boardShawn Guo1-1/+1
Since commit 6571534 (plat-mxc: iomux-v3.h: implicitly enable pull-up/down when that's desired) was in, the power button on imx51 babbage board stopped working because it's pulled up by mistake. The patch removes the pull-up setting from the pad configuration for that gpio to make the power button back to work. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-12-09ARM: imx: fix cpufreq build errorsRichard Zhao1-0/+1
CC arch/arm/plat-mxc/cpufreq.o arch/arm/plat-mxc/cpufreq.c:203: error: expected declaration specifiers or '...' before string constant arch/arm/plat-mxc/cpufreq.c:203: warning: data definition has no type or storage class arch/arm/plat-mxc/cpufreq.c:203: warning: type defaults to 'int' in declaration of 'MODULE_AUTHOR' arch/arm/plat-mxc/cpufreq.c:203: warning: function declaration isn't a prototype arch/arm/plat-mxc/cpufreq.c:204: error: expected declaration specifiers or '...' before string constant arch/arm/plat-mxc/cpufreq.c:204: warning: data definition has no type or storage class arch/arm/plat-mxc/cpufreq.c:204: warning: type defaults to 'int' in declaration of 'MODULE_DESCRIPTION' arch/arm/plat-mxc/cpufreq.c:204: warning: function declaration isn't a prototype arch/arm/plat-mxc/cpufreq.c:205: error: expected declaration specifiers or '...' before string constant arch/arm/plat-mxc/cpufreq.c:205: warning: data definition has no type or storage class arch/arm/plat-mxc/cpufreq.c:205: warning: type defaults to 'int' in declaration of 'MODULE_LICENSE' arch/arm/plat-mxc/cpufreq.c:205: warning: function declaration isn't a prototype make[1]: *** [arch/arm/plat-mxc/cpufreq.o] Error 1 make: *** [arch/arm/plat-mxc] Error 2 Signed-off-by: Richard Zhao <richard.zhao@freescale.com> Signed-off-by: Richard Zhao <richard.zhao@linaro.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-12-09ARM: mx5: add __initconst for fec pdataDong Aisheng3-3/+3
Signed-off-by: Dong Aisheng <b29396@freescale.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-12-09MXC PWM: should active during DOZE/WAIT/DBG modeJason Chen1-1/+6
Signed-off-by: Jason Chen <jason.chen@linaro.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Cc: stable@kernel.org
2011-12-09x86, efi: Calling __pa() with an ioremap()ed address is invalidMatt Fleming6-35/+48
If we encounter an efi_memory_desc_t without EFI_MEMORY_WB set in ->attribute we currently call set_memory_uc(), which in turn calls __pa() on a potentially ioremap'd address. On CONFIG_X86_32 this is invalid, resulting in the following oops on some machines: BUG: unable to handle kernel paging request at f7f22280 IP: [<c10257b9>] reserve_ram_pages_type+0x89/0x210 [...] Call Trace: [<c104f8ca>] ? page_is_ram+0x1a/0x40 [<c1025aff>] reserve_memtype+0xdf/0x2f0 [<c1024dc9>] set_memory_uc+0x49/0xa0 [<c19334d0>] efi_enter_virtual_mode+0x1c2/0x3aa [<c19216d4>] start_kernel+0x291/0x2f2 [<c19211c7>] ? loglevel+0x1b/0x1b [<c19210bf>] i386_start_kernel+0xbf/0xc8 A better approach to this problem is to map the memory region with the correct attributes from the start, instead of modifying it after the fact. The uncached case can be handled by ioremap_nocache() and the cached by ioremap_cache(). Despite first impressions, it's not possible to use ioremap_cache() to map all cached memory regions on CONFIG_X86_64 because EFI_RUNTIME_SERVICES_DATA regions really don't like being mapped into the vmalloc space, as detailed in the following bug report, https://bugzilla.redhat.com/show_bug.cgi?id=748516 Therefore, we need to ensure that any EFI_RUNTIME_SERVICES_DATA regions are covered by the direct kernel mapping table on CONFIG_X86_64. To accomplish this we now map E820_RESERVED_EFI regions via the direct kernel mapping with the initial call to init_memory_mapping() in setup_arch(), whereas previously these regions wouldn't be mapped if they were after the last E820_RAM region until efi_ioremap() was called. Doing it this way allows us to delete efi_ioremap() completely. Signed-off-by: Matt Fleming <matt.fleming@intel.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Matthew Garrett <mjg@redhat.com> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Huang Ying <huang.ying.caritas@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Link: http://lkml.kernel.org/r/1321621751-3650-1-git-send-email-matt@console-pimps.org Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-12-09Merge branch 'fixes' of ↵Linus Torvalds28-55/+69
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (28 commits) ARM: sa1100: fix build error ARM: OMAP1: recalculate loops per jiffy after dpll1 reprogram ARM: davinci: dm365 evm: align nand partition table to u-boot ARM: davinci: da850 evm: change audio edma event queue to EVENTQ_0 ARM: davinci: dm646x evm: wrong register used in setup_vpif_input_channel_mode ARM: davinci: dm646x does not have a DSP domain ARM: davinci: psc: fix incorrect offsets ARM: davinci: psc: fix incorrect mask ARM: mx28: LRADC macro rename arm: mx23: recognise stmp378x as mx23 ARM: mxs: fix machines' initializers order ARM: mxs/tx28: add __initconst for fec pdata ARM: S3C64XX: Staticise s3c6400_sysclass ARM: S3C64XX: Add linux/export.h to dev-spi.c ARM: S3C64XX: Remove extern from definition of framebuffer setup call MAINTAINERS: Extend Samsung patterns to cover SPI and ASoC drivers MAINTAINERS: Add linux-samsung-soc mailing list for Samsung MAINTAINERS: Consolidate Samsung MAINTAINERS ARM: CSR: PM: fix build error due to undeclared 'THIS_MODULE' ARM: CSR: fix build error due to new mdesc->dma_zone_size ...
2011-12-09x86, hpet: Immediately disable HPET timer 1 if rtc irq is maskedMark Langsdorf1-7/+14
When HPET is operating in RTC mode, the TN_ENABLE bit on timer1 controls whether the HPET or the RTC delivers interrupts to irq8. When the system goes into suspend, the RTC driver sends a signal to the HPET driver so that the HPET releases control of irq8, allowing the RTC to wake the system from suspend. The switchover is accomplished by a write to the HPET configuration registers which currently only occurs while servicing the HPET interrupt. On some systems, I have seen the system suspend before an HPET interrupt occurs, preventing the write to the HPET configuration register and leaving the HPET in control of the irq8. As the HPET is not active during suspend, it does not generate a wake signal and RTC alarms do not work. This patch forces the HPET driver to immediately transfer control of the irq8 channel to the RTC instead of waiting until the next interrupt event. Signed-off-by: Mark Langsdorf <mark.langsdorf@amd.com> Link: http://lkml.kernel.org/r/20111118153306.GB16319@alberich.amd.com Tested-by: Andreas Herrmann <andreas.herrmann3@amd.com> Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org
2011-12-08Merge branch 'fixes' of git://github.com/hzhuang1/linux into fixesArnd Bergmann1-2/+2
2011-12-08ARM: sa1100: fix build errorJett.Zhou1-2/+2
arm-eabi-4.4.3-ld:--defsym zreladdr=: syntax error make[2]: *** [arch/arm/boot/compressed/vmlinux] Error 1 make[1]: *** [arch/arm/boot/compressed/vmlinux] Error 2 make: *** [uImage] Error 2 Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com> Signed-off-by: Jett.Zhou <jtzhou@marvell.com>
2011-12-08Merge branch 'fixes' of ↵Olof Johansson2-7/+10
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes
2011-12-08ARM: EXYNOS: Fix build error without CONFIG_LOCAL_TIMERSKukjin Kim1-2/+5
arch/arm/mach-exynos/mct.c: In function 'exynos4_timer_resources': arch/arm/mach-exynos/mct.c:450: error: 'exynos4_mct_tick_isr' undeclared (first use in this function) arch/arm/mach-exynos/mct.c:450: error: (Each undeclared identifier is reported only once arch/arm/mach-exynos/mct.c:450: error: for each function it appears in.) make[1]: *** [arch/arm/mach-exynos/mct.o] Error 1 Reported-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Changhwan Youn <chaos.youn@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Cc: Marc Zyngier <marc.zyngier@arm.com>
2011-12-08ARM: EXYNOS: Fix for stall in case of cpu hotplug or sleepAmit Daniel Kachhap1-1/+5
This patch adds remove_irq in place of disable_irq which is correct equivalent function for setup_irq used in exynos4_mct_tick_init. Signed-off-by: Amit Daniel Kachhap <amit.kachhap@linaro.org> Tested-by: Inderpal Singh <inderpal.singh@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-12-08ARM: S5PV210: Set 1000ns as PWM backlight period on SMDKV210Jingoo Han1-0/+1
The SMDK board uses LT3591 as backlight LED driver of LTE480WV LCD. According to the LT3591 datasheet, the switching frequency should be 1MHz. So, PWM period is calculated by following formula: PWM period = 1/switching frequency = 1/1MHz = 1000ns Thus, the PWM backlight period should be 1000ns. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-12-08ARM: SAMSUNG: remove duplicated header includeJingoo Han1-1/+0
This patch removes duplicated slab header for pwm backlight. arch/arm/plat-samsung/dev-backlight.c: slab.h is included more than once. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-12-08Merge branch 'for-linus' of ↵Linus Torvalds2-1/+5
git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: m68k: Wire up process_vm_{read,write}v
2011-12-07Merge branch 'samsung-fixes-2' of ↵Arnd Bergmann3-2/+3
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into fixes
2011-12-06m68k: Wire up process_vm_{read,write}vGeert Uytterhoeven2-1/+5
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Greg Ungerer <gerg@uclinux.org>
2011-12-06Merge branch 'fixes' of git://gitorious.org/linux-davinci/linux-davinci into ↵Arnd Bergmann6-16/+18
fixes
2011-12-06Merge branch 'mxs/fixes' of git://git.linaro.org/people/shawnguo/linux-2.6 ↵Arnd Bergmann5-6/+7
into fixes
2011-12-06Merge branch 'fixes' of ↵Arnd Bergmann2-0/+2
git://gitorious.org/sirfprima2-kernel/sirfprima2-kernel into fixes
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-27 22:45:24 +0300