summaryrefslogtreecommitdiff
path: root/arch/x86
AgeCommit message (Collapse)AuthorFilesLines
2015-10-16KVM: x86: manually unroll bad_mt_xwr loopPaolo Bonzini1-8/+10
The loop is computing one of two constants, it can be simpler to write everything inline. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-16KVM: nVMX: expose VPID capability to L1Wanpeng Li1-2/+7
Expose VPID capability to L1. For nested guests, we don't do anything specific for single context invalidation. Hence, only advertise support for global context invalidation. The major benefit of nested VPID comes from having separate vpids when switching between L1 and L2, and also when L2's vCPUs not sched in/out on L1. Reviewed-by: Wincy Van <fanwenyi0529@gmail.com> Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-16KVM: nVMX: nested VPID emulationWanpeng Li1-7/+32
VPID is used to tag address space and avoid a TLB flush. Currently L0 use the same VPID to run L1 and all its guests. KVM flushes VPID when switching between L1 and L2. This patch advertises VPID to the L1 hypervisor, then address space of L1 and L2 can be separately treated and avoid TLB flush when swithing between L1 and L2. For each nested vmentry, if vpid12 is changed, reuse shadow vpid w/ an invvpid. Performance: run lmbench on L2 w/ 3.5 kernel. Context switching - times in microseconds - smaller is better ------------------------------------------------------------------------- Host OS 2p/0K 2p/16K 2p/64K 8p/16K 8p/64K 16p/16K 16p/64K ctxsw ctxsw ctxsw ctxsw ctxsw ctxsw ctxsw --------- ------------- ------ ------ ------ ------ ------ ------- ------- kernel Linux 3.5.0-1 1.2200 1.3700 1.4500 4.7800 2.3300 5.60000 2.88000 nested VPID kernel Linux 3.5.0-1 1.2600 1.4300 1.5600 12.7 12.9 3.49000 7.46000 vanilla Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com> Reviewed-by: Wincy Van <fanwenyi0529@gmail.com> Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-16KVM: nVMX: emulate the INVVPID instructionWanpeng Li2-1/+61
Add the INVVPID instruction emulation. Reviewed-by: Wincy Van <fanwenyi0529@gmail.com> Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-14KVM: VMX: introduce __vmx_flush_tlb to handle specific vpidWanpeng Li1-8/+13
Introduce __vmx_flush_tlb() to handle specific vpid. Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-14KVM: VMX: adjust interface to allocate/free_vpidWanpeng Li1-13/+12
Adjust allocate/free_vid so that they can be reused for the nested vpid. Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-14KVM: x86: don't notify userspace IOAPIC on edge EOIRadim Krčmář1-2/+4
On real hardware, edge-triggered interrupts don't set a bit in TMR, which means that IOAPIC isn't notified on EOI. Do the same here. Staying in guest/kernel mode after edge EOI is what we want for most devices. If some bugs could be nicely worked around with edge EOI notifications, we should invest in a better interface. Signed-off-by: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-14KVM: x86: fix edge EOI and IOAPIC reconfig raceRadim Krčmář2-2/+6
KVM uses eoi_exit_bitmap to track vectors that need an action on EOI. The problem is that IOAPIC can be reconfigured while an interrupt with old configuration is pending and eoi_exit_bitmap only remembers the newest configuration; thus EOI from the pending interrupt is not recognized. (Reconfiguration is not a problem for level interrupts, because IOAPIC sends interrupt with the new configuration.) For an edge interrupt with ACK notifiers, like i8254 timer; things can happen in this order 1) IOAPIC inject a vector from i8254 2) guest reconfigures that vector's VCPU and therefore eoi_exit_bitmap on original VCPU gets cleared 3) guest's handler for the vector does EOI 4) KVM's EOI handler doesn't pass that vector to IOAPIC because it is not in that VCPU's eoi_exit_bitmap 5) i8254 stops working A simple solution is to set the IOAPIC vector in eoi_exit_bitmap if the vector is in PIR/IRR/ISR. This creates an unwanted situation if the vector is reused by a non-IOAPIC source, but I think it is so rare that we don't want to make the solution more sophisticated. The simple solution also doesn't work if we are reconfiguring the vector. (Shouldn't happen in the wild and I'd rather fix users of ACK notifiers instead of working around that.) The are no races because ioapic injection and reconfig are locked. Fixes: b053b2aef25d ("KVM: x86: Add EOI exit bitmap inference") [Before b053b2aef25d, this bug happened only with APICv.] Fixes: c7c9c56ca26f ("x86, apicv: add virtual interrupt delivery support") Cc: <stable@vger.kernel.org> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-14kvm: x86: set KVM_REQ_EVENT when updating IRRRadim Krčmář1-0/+2
After moving PIR to IRR, the interrupt needs to be delivered manually. Reported-by: Paolo Bonzini <pbonzini@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-14Merge branch 'kvm-master' into HEADPaolo Bonzini2-4/+8
Merge more important SMM fixes.
2015-10-14KVM: x86: fix RSM into 64-bit protected modePaolo Bonzini1-3/+7
In order to get into 64-bit protected mode, you need to enable paging while EFER.LMA=1. For this to work, CS.L must be 0. Currently, we load the segments before CR0 and CR4, which means that if RSM returns into 64-bit protected mode CS.L is already 1 and everything breaks. Luckily, CS.L=0 is always the case when executing RSM, because it is forbidden to execute RSM from 64-bit protected mode. Hence it is enough to load CR0 and CR4 first, and only then the segments. Fixes: 660a5d517aaab9187f93854425c4c63f4a09195c Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-14KVM: x86: fix previous commit for 32-bitPaolo Bonzini1-1/+1
Unfortunately I only noticed this after pushing. Fixes: f0d648bdf0a5bbc91da6099d5282f77996558ea4 Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-13Merge branch 'kvm-master' into HEADPaolo Bonzini3-84/+83
This merge brings in a couple important SMM fixes, which makes it easier to test latest KVM with unrestricted_guest=0 and to test the in-progress work on SMM support in the firmware. Conflicts: arch/x86/kvm/x86.c
2015-10-13KVM: x86: fix SMI to halted VCPUPaolo Bonzini1-0/+3
An SMI to a halted VCPU must wake it up, hence a VCPU with a pending SMI must be considered runnable. Fixes: 64d6067057d9658acb8675afcfba549abdb7fc16 Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-13KVM: x86: clean up kvm_arch_vcpu_runnablePaolo Bonzini1-10/+29
Split the huge conditional in two functions. Fixes: 64d6067057d9658acb8675afcfba549abdb7fc16 Cc: stable@vger.kernel.org Reviewed-by: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-13KVM: x86: map/unmap private slots in __x86_set_memory_regionPaolo Bonzini1-32/+30
Otherwise, two copies (one of them never populated and thus bogus) are allocated for the regular and SMM address spaces. This breaks SMM with EPT but without unrestricted guest support, because the SMM copy of the identity page map is all zeros. By moving the allocation to the caller we also remove the last vestiges of kernel-allocated memory regions (not accessible anymore in userspace since commit b74a07beed0e, "KVM: Remove kernel-allocated memory regions", 2010-06-21); that is a nice bonus. Reported-by: Alexandre DERUMIER <aderumier@odiso.com> Cc: stable@vger.kernel.org Fixes: 9da0e4d5ac969909f6b435ce28ea28135a9cbd69 Reviewed-by: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-13KVM: x86: build kvm_userspace_memory_region in x86_set_memory_regionPaolo Bonzini3-42/+21
The next patch will make x86_set_memory_region fill the userspace_addr. Since the struct is not used untouched anymore, it makes sense to build it in x86_set_memory_region directly; it also simplifies the callers. Reported-by: Alexandre DERUMIER <aderumier@odiso.com> Cc: stable@vger.kernel.org Fixes: 9da0e4d5ac969909f6b435ce28ea28135a9cbd69 Reviewed-by: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-01KVM: Update Posted-Interrupts Descriptor when vCPU is blockedFeng Wu3-10/+188
This patch updates the Posted-Interrupts Descriptor when vCPU is blocked. pre-block: - Add the vCPU to the blocked per-CPU list - Set 'NV' to POSTED_INTR_WAKEUP_VECTOR post-block: - Remove the vCPU from the per-CPU list Signed-off-by: Feng Wu <feng.wu@intel.com> [Concentrate invocation of pre/post-block hooks to vcpu_block. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-01KVM: Update Posted-Interrupts Descriptor when vCPU is preemptedFeng Wu1-0/+80
This patch updates the Posted-Interrupts Descriptor when vCPU is preempted. sched out: - Set 'SN' to suppress furture non-urgent interrupts posted for the vCPU. sched in: - Clear 'SN' - Change NDST if vCPU is scheduled to a different CPU - Set 'NV' to POSTED_INTR_VECTOR Signed-off-by: Feng Wu <feng.wu@intel.com> [Include asm/cpu.h to fix !CONFIG_SMP compilation. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-01KVM: x86: select IRQ_BYPASS_MANAGERFeng Wu3-0/+56
Select IRQ_BYPASS_MANAGER for x86 when CONFIG_KVM is set Signed-off-by: Feng Wu <feng.wu@intel.com> Reviewed-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-01KVM: x86: Update IRTE for posted-interruptsFeng Wu4-0/+121
This patch adds the routine to update IRTE for posted-interrupts when guest changes the interrupt configuration. Signed-off-by: Feng Wu <feng.wu@intel.com> Reviewed-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> [Squashed in automatically generated patch from the build robot "KVM: x86: vcpu_to_pi_desc() can be static" - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-01KVM: make kvm_set_msi_irq() publicFeng Wu2-2/+7
Make kvm_set_msi_irq() public, we can use this function outside. Signed-off-by: Feng Wu <feng.wu@intel.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-01KVM: Define a new interface kvm_intr_is_single_vcpu()Feng Wu4-0/+91
This patch defines a new interface kvm_intr_is_single_vcpu(), which can returns whether the interrupt is for single-CPU or not. It is used by VT-d PI, since now we only support single-CPU interrupts, For lowest-priority interrupts, if user configures it via /proc/irq or uses irqbalance to make it single-CPU, we can use PI to deliver the interrupts to it. Full functionality of lowest-priority support will be added later. Signed-off-by: Feng Wu <feng.wu@intel.com> Reviewed-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-01KVM: Add some helper functions for Posted-InterruptsFeng Wu1-0/+26
This patch adds some helper functions to manipulate the Posted-Interrupts Descriptor. Signed-off-by: Feng Wu <feng.wu@intel.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Alex Williamson <alex.williamson@redhat.com> [Make the new functions inline. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-01KVM: Extend struct pi_desc for VT-d Posted-InterruptsFeng Wu1-2/+18
Extend struct pi_desc for VT-d Posted-Interrupts. Signed-off-by: Feng Wu <feng.wu@intel.com> Reviewed-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-01irq_remapping: move structs outside #ifdefPaolo Bonzini1-5/+5
This is friendlier to clients of the code, who are going to prepare vcpu_data structs unconditionally, even if CONFIG_IRQ_REMAP is not defined. Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-01x86: kvmclock: abolish PVCLOCK_COUNTS_FROM_ZERORadim Krčmář1-11/+35
Newer KVM won't be exposing PVCLOCK_COUNTS_FROM_ZERO anymore. The purpose of that flags was to start counting system time from 0 when the KVM clock has been initialized. We can achieve the same by selecting one read as the initial point. A simple subtraction will work unless the KVM clock count overflows earlier (has smaller width) than scheduler's cycle count. We should be safe till x86_128. Because PVCLOCK_COUNTS_FROM_ZERO was enabled only on new hypervisors, setting sched clock as stable based on PVCLOCK_TSC_STABLE_BIT might regress on older ones. I presume we don't need to change kvm_clock_read instead of introducing kvm_sched_clock_read. A problem could arise in case sched_clock is expected to return the same value as get_cycles, but we should have merged those clocks in that case. Signed-off-by: Radim Krčmář <rkrcmar@redhat.com> Acked-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-01KVM: VMX: drop rdtscp_enabled fieldXiao Guangrong2-11/+14
Check cpuid bit instead of it Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-01KVM: VMX: clean up bit operation on SECONDARY_VM_EXEC_CONTROLXiao Guangrong1-17/+6
Use vmcs_set_bits() and vmcs_clear_bits() to clean up the code Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-01KVM: VMX: unify SECONDARY_VM_EXEC_CONTROL updateXiao Guangrong1-10/+25
Unify the update in vmx_cpuid_update() Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com> [Rewrite to use vmcs_set_secondary_exec_control. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-01KVM: VMX: align vmx->nested.nested_vmx_secondary_ctls_high to ↵Paolo Bonzini1-3/+8
vmx->rdtscp_enabled The SECONDARY_EXEC_RDTSCP must be available iff RDTSCP is enabled in the guest. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-01KVM: VMX: simplify invpcid handling in vmx_cpuid_update()Xiao Guangrong1-12/+5
If vmx_invpcid_supported() is true, second execution control filed must be supported and SECONDARY_EXEC_ENABLE_INVPCID must have already been set in current vmcs by vmx_secondary_exec_control() If vmx_invpcid_supported() is false, no need to clear SECONDARY_EXEC_ENABLE_INVPCID Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-01KVM: VMX: simplify rdtscp handling in vmx_cpuid_update()Xiao Guangrong1-9/+8
if vmx_rdtscp_supported() is true SECONDARY_EXEC_RDTSCP must have already been set in current vmcs by vmx_secondary_exec_control() Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-01KVM: VMX: drop rdtscp_enabled check in prepare_vmcs02()Xiao Guangrong1-2/+1
SECONDARY_EXEC_RDTSCP set for L2 guest comes from vmcs12 Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-01KVM: x86: add pcommit supportXiao Guangrong5-8/+42
Pass PCOMMIT CPU feature to guest to enable PCOMMIT instruction Currently we do not catch pcommit instruction for L1 guest and allow L1 to catch this instruction for L2 if, as required by the spec, L1 can enumerate the PCOMMIT instruction via CPUID: | IA32_VMX_PROCBASED_CTLS2[53] (which enumerates support for the | 1-setting of PCOMMIT exiting) is always the same as | CPUID.07H:EBX.PCOMMIT[bit 22]. Thus, software can set PCOMMIT exiting | to 1 if and only if the PCOMMIT instruction is enumerated via CPUID The spec can be found at https://software.intel.com/sites/default/files/managed/0d/53/319433-022.pdf Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-01KVM: x86: allow guest to use cflushopt and clwbXiao Guangrong1-1/+1
Pass these CPU features to guest to enable them in guest They are needed by nvdimm drivers Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-01KVM: vmx: disable posted interrupts if no local APICPaolo Bonzini1-1/+2
Uniprocessor 32-bit randconfigs can disable the local APIC, and posted interrupts require reserving a vector on the LAPIC, so they are incompatible. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-01kvm/x86: Hyper-V HV_X64_MSR_VP_RUNTIME supportAndrey Smetanin4-2/+24
HV_X64_MSR_VP_RUNTIME msr used by guest to get "the time the virtual processor consumes running guest code, and the time the associated logical processor spends running hypervisor code on behalf of that guest." Calculation of this time is performed by task_cputime_adjusted() for vcpu task. Necessary to support loading of winhv.sys in guest, which in turn is required to support Windows VMBus. Signed-off-by: Andrey Smetanin <asmetanin@virtuozzo.com> Reviewed-by: Roman Kagan <rkagan@virtuozzo.com> Signed-off-by: Denis V. Lunev <den@openvz.org> CC: Paolo Bonzini <pbonzini@redhat.com> CC: Gleb Natapov <gleb@kernel.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-01kvm/x86: Hyper-V HV_X64_MSR_VP_INDEX export for QEMU.Andrey Smetanin1-0/+1
Insert Hyper-V HV_X64_MSR_VP_INDEX into msr's emulated list, so QEMU can set Hyper-V features cpuid HV_X64_MSR_VP_INDEX_AVAILABLE bit correctly. KVM emulation part is in place already. Necessary to support loading of winhv.sys in guest, which in turn is required to support Windows VMBus. Signed-off-by: Andrey Smetanin <asmetanin@virtuozzo.com> Reviewed-by: Roman Kagan <rkagan@virtuozzo.com> Signed-off-by: Denis V. Lunev <den@openvz.org> CC: Paolo Bonzini <pbonzini@redhat.com> CC: Gleb Natapov <gleb@kernel.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-01kvm/x86: Hyper-V HV_X64_MSR_RESET msrAndrey Smetanin3-0/+20
HV_X64_MSR_RESET msr is used by Hyper-V based Windows guest to reset guest VM by hypervisor. Necessary to support loading of winhv.sys in guest, which in turn is required to support Windows VMBus. Signed-off-by: Andrey Smetanin <asmetanin@virtuozzo.com> Reviewed-by: Roman Kagan <rkagan@virtuozzo.com> Signed-off-by: Denis V. Lunev <den@openvz.org> CC: Paolo Bonzini <pbonzini@redhat.com> CC: Gleb Natapov <gleb@kernel.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-01kvm: add tracepoint for fast mmioJason Wang3-0/+20
Cc: Gleb Natapov <gleb@kernel.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-01KVM: x86: Add support for local interrupt requests from userspaceSteve Rutherford4-15/+68
In order to enable userspace PIC support, the userspace PIC needs to be able to inject local interrupts even when the APICs are in the kernel. KVM_INTERRUPT now supports sending local interrupts to an APIC when APICs are in the kernel. The ready_for_interrupt_request flag is now only set when the CPU/APIC will immediately accept and inject an interrupt (i.e. APIC has not masked the PIC). When the PIC wishes to initiate an INTA cycle with, say, CPU0, it kicks CPU0 out of the guest, and renedezvous with CPU0 once it arrives in userspace. When the CPU/APIC unmasks the PIC, a KVM_EXIT_IRQ_WINDOW_OPEN is triggered, so that userspace has a chance to inject a PIC interrupt if it had been pending. Overall, this design can lead to a small number of spurious userspace renedezvous. In particular, whenever the PIC transistions from low to high while it is masked and whenever the PIC becomes unmasked while it is low. Note: this does not buffer more than one local interrupt in the kernel, so the VMM needs to enter the guest in order to complete interrupt injection before injecting an additional interrupt. Compiles for x86. Can pass the KVM Unit Tests. Signed-off-by: Steve Rutherford <srutherford@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-01KVM: x86: Add EOI exit bitmap inferenceSteve Rutherford5-3/+54
In order to support a userspace IOAPIC interacting with an in kernel APIC, the EOI exit bitmaps need to be configurable. If the IOAPIC is in userspace (i.e. the irqchip has been split), the EOI exit bitmaps will be set whenever the GSI Routes are configured. In particular, for the low MSI routes are reservable for userspace IOAPICs. For these MSI routes, the EOI Exit bit corresponding to the destination vector of the route will be set for the destination VCPU. The intention is for the userspace IOAPICs to use the reservable MSI routes to inject interrupts into the guest. This is a slight abuse of the notion of an MSI Route, given that MSIs classically bypass the IOAPIC. It might be worthwhile to add an additional route type to improve clarity. Compile tested for Intel x86. Signed-off-by: Steve Rutherford <srutherford@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-01KVM: x86: Add KVM exit for IOAPIC EOIsSteve Rutherford3-7/+30
Adds KVM_EXIT_IOAPIC_EOI which allows the kernel to EOI level-triggered IOAPIC interrupts. Uses a per VCPU exit bitmap to decide whether or not the IOAPIC needs to be informed (which is identical to the EOI_EXIT_BITMAP field used by modern x86 processors, but can also be used to elide kvm IOAPIC EOI exits on older processors). [Note: A prototype using ResampleFDs found that decoupling the EOI from the VCPU's thread made it possible for the VCPU to not see a recent EOI after reentering the guest. This does not match real hardware.] Compile tested for Intel x86. Signed-off-by: Steve Rutherford <srutherford@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-01KVM: x86: Split the APIC from the rest of IRQCHIP.Steve Rutherford7-7/+56
First patch in a series which enables the relocation of the PIC/IOAPIC to userspace. Adds capability KVM_CAP_SPLIT_IRQCHIP; KVM_CAP_SPLIT_IRQCHIP enables the construction of LAPICs without the rest of the irqchip. Compile tested for x86. Signed-off-by: Steve Rutherford <srutherford@google.com> Suggested-by: Andrew Honig <ahonig@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-01KVM: x86: unify handling of interrupt windowPaolo Bonzini3-26/+2
The interrupt window is currently checked twice, once in vmx.c/svm.c and once in dm_request_for_irq_injection. The only difference is the extra check for kvm_arch_interrupt_allowed in dm_request_for_irq_injection, and the different return value (EINTR/KVM_EXIT_INTR for vmx.c/svm.c vs. 0/KVM_EXIT_IRQ_WINDOW_OPEN for dm_request_for_irq_injection). However, dm_request_for_irq_injection is basically dead code! Revive it by removing the checks in vmx.c and svm.c's vmexit handlers, and fixing the returned values for the dm_request_for_irq_injection case. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-01KVM: x86: introduce lapic_in_kernelPaolo Bonzini7-43/+45
Avoid pointer chasing and memory barriers, and simplify the code when split irqchip (LAPIC in kernel, IOAPIC/PIC in userspace) is introduced. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-01KVM: x86: replace vm_has_apicv hook with cpu_uses_apicvPaolo Bonzini6-9/+15
This will avoid an unnecessary trip to ->kvm and from there to the VPIC. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-01KVM: x86: store IOAPIC-handled vectors in each VCPUPaolo Bonzini7-34/+18
We can reuse the algorithm that computes the EOI exit bitmap to figure out which vectors are handled by the IOAPIC. The only difference between the two is for edge-triggered interrupts other than IRQ8 that have no notifiers active; however, the IOAPIC does not have to do anything special for these interrupts anyway. This again limits the interactions between the IOAPIC and the LAPIC, making it easier to move the former to userspace. Inspired by a patch from Steve Rutherford. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-01KVM: x86: set TMR when the interrupt is acceptedPaolo Bonzini5-23/+14
Do not compute TMR in advance. Instead, set the TMR just before the interrupt is accepted into the IRR. This limits the coupling between IOAPIC and LAPIC. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-02-05 00:24:43 +0300