| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The comments here are wrong. They are too absolute about where
faults can occur when running in the kernel. The comments are
also a bit hard to match up with the code.
Trim down the comments, and make them more precise.
Also add a comment explaining why we are doing the
bad_area_nosemaphore() path here.
Cc: x86@kernel.org
Cc: Jann Horn <jannh@google.com>
Cc: Sean Christopherson <sean.j.christopherson@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180928160227.077DDD7A@viggo.jf.intel.com
|
|
The SMAP and Reserved checking do not have nice comments. Add
some to clarify and make it match everything else.
Cc: x86@kernel.org
Cc: Jann Horn <jannh@google.com>
Cc: Sean Christopherson <sean.j.christopherson@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180928160225.FFD44B8D@viggo.jf.intel.com
|
|
The last patch broke out kernel address space handing into its own
helper. Now, do the same for user address space handling.
Cc: x86@kernel.org
Cc: Jann Horn <jannh@google.com>
Cc: Sean Christopherson <sean.j.christopherson@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180928160223.9C4F6440@viggo.jf.intel.com
|
|
The page fault handler (__do_page_fault()) basically has two sections:
one for handling faults in the kernel portion of the address space
and another for faults in the user portion of the address space.
But, these two parts don't stick out that well. Let's make that more
clear from code separation and naming. Pull kernel fault
handling into its own helper, and reflect that naming by renaming
spurious_fault() -> spurious_kernel_fault().
Also, rewrite the vmalloc() handling comment a bit. It was a bit
stale and also glossed over the reserved bit handling.
Cc: x86@kernel.org
Cc: Jann Horn <jannh@google.com>
Cc: Sean Christopherson <sean.j.christopherson@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180928160222.401F4E10@viggo.jf.intel.com
|
|
We pass around a variable called "error_code" all around the page
fault code. Sounds simple enough, especially since "error_code" looks
like it exactly matches the values that the hardware gives us on the
stack to report the page fault error code (PFEC in SDM parlance).
But, that's not how it works.
For part of the page fault handler, "error_code" does exactly match
PFEC. But, during later parts, it diverges and starts to mean
something a bit different.
Give it two names for its two jobs.
The place it diverges is also really screwy. It's only in a spot
where the hardware tells us we have kernel-mode access that occurred
while we were in usermode accessing user-controlled address space.
Add a warning in there.
Cc: x86@kernel.org
Cc: Jann Horn <jannh@google.com>
Cc: Sean Christopherson <sean.j.christopherson@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180928160220.4A2272C9@viggo.jf.intel.com
|
|
Lazy TLB mode can result in an idle CPU being woken up by a TLB flush,
when all it really needs to do is reload %CR3 at the next context switch,
assuming no page table pages got freed.
Memory ordering is used to prevent race conditions between switch_mm_irqs_off,
which checks whether .tlb_gen changed, and the TLB invalidation code, which
increments .tlb_gen whenever page table entries get invalidated.
The atomic increment in inc_mm_tlb_gen is its own barrier; the context
switch code adds an explicit barrier between reading tlbstate.is_lazy and
next->context.tlb_gen.
CPUs in lazy TLB mode remain part of the mm_cpumask(mm), both because
that allows TLB flush IPIs to be sent at page table freeing time, and
because the cache line bouncing on the mm_cpumask(mm) was responsible
for about half the CPU use in switch_mm_irqs_off().
We can change native_flush_tlb_others() without touching other
(paravirt) implementations of flush_tlb_others() because we'll be
flushing less. The existing implementations flush more and are
therefore still correct.
Cc: npiggin@gmail.com
Cc: mingo@kernel.org
Cc: will.deacon@arm.com
Cc: kernel-team@fb.com
Cc: luto@kernel.org
Cc: hpa@zytor.com
Tested-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Rik van Riel <riel@surriel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180926035844.1420-8-riel@surriel.com
|
|
Pass the information on to native_flush_tlb_others.
No functional changes.
Cc: npiggin@gmail.com
Cc: mingo@kernel.org
Cc: will.deacon@arm.com
Cc: songliubraving@fb.com
Cc: kernel-team@fb.com
Cc: hpa@zytor.com
Cc: luto@kernel.org
Signed-off-by: Rik van Riel <riel@surriel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180926035844.1420-7-riel@surriel.com
|
|
Add an argument to flush_tlb_mm_range to indicate whether page tables
are about to be freed after this TLB flush. This allows for an
optimization of flush_tlb_mm_range to skip CPUs in lazy TLB mode.
No functional changes.
Cc: npiggin@gmail.com
Cc: mingo@kernel.org
Cc: will.deacon@arm.com
Cc: songliubraving@fb.com
Cc: kernel-team@fb.com
Cc: luto@kernel.org
Cc: hpa@zytor.com
Signed-off-by: Rik van Riel <riel@surriel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180926035844.1420-6-riel@surriel.com
|
|
Move some code that will be needed for the lazy -> !lazy state
transition when a lazy TLB CPU has gotten out of date.
No functional changes, since the if (real_prev == next) branch
always returns.
(cherry picked from commit 61d0beb5796ab11f7f3bf38cb2eccc6579aaa70b)
Cc: npiggin@gmail.com
Cc: efault@gmx.de
Cc: will.deacon@arm.com
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: songliubraving@fb.com
Cc: kernel-team@fb.com
Cc: hpa@zytor.com
Suggested-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Rik van Riel <riel@surriel.com>
Acked-by: Dave Hansen <dave.hansen@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180716190337.26133-4-riel@surriel.com
|
|
On most workloads, the number of context switches far exceeds the
number of TLB flushes sent. Optimizing the context switches, by always
using lazy TLB mode, speeds up those workloads.
This patch results in about a 1% reduction in CPU use on a two socket
Broadwell system running a memcache like workload.
Cc: npiggin@gmail.com
Cc: efault@gmx.de
Cc: will.deacon@arm.com
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: kernel-team@fb.com
Cc: hpa@zytor.com
Cc: luto@kernel.org
Tested-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Rik van Riel <riel@surriel.com>
(cherry picked from commit 95b0e6357d3e4e05349668940d7ff8f3b7e7e11e)
Acked-by: Dave Hansen <dave.hansen@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180716190337.26133-7-riel@surriel.com
|
|
Use the new tlb_get_unmap_shift() to determine the stride of the
INVLPG loop.
Cc: Nick Piggin <npiggin@gmail.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
|
|
Arnd Bergmann reported that turning on -Wvla found a new (unintended) VLA usage:
arch/x86/mm/pgtable.c: In function 'pgd_alloc':
include/linux/build_bug.h:29:45: error: ISO C90 forbids variable length array 'u_pmds' [-Werror=vla]
arch/x86/mm/pgtable.c:190:34: note: in expansion of macro 'static_cpu_has'
#define PREALLOCATED_USER_PMDS (static_cpu_has(X86_FEATURE_PTI) ? \
^~~~~~~~~~~~~~
arch/x86/mm/pgtable.c:431:16: note: in expansion of macro 'PREALLOCATED_USER_PMDS'
pmd_t *u_pmds[PREALLOCATED_USER_PMDS];
^~~~~~~~~~~~~~~~~~~~~~
Use the actual size of the array that is used for X86_FEATURE_PTI,
which is known at build time, instead of the variable size.
[ mingo: Squashed original fix with followup fix to avoid bisection breakage, wrote new changelog. ]
Reported-by: Arnd Bergmann <arnd@arndb.de>
Original-written-by: Arnd Bergmann <arnd@arndb.de>
Reported-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Joerg Roedel <jroedel@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Toshi Kani <toshi.kani@hpe.com>
Fixes: 1be3f247c288 ("x86/mm: Avoid VLA in pgd_alloc()")
Link: http://lkml.kernel.org/r/20181008235434.GA35035@beast
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
When SME is enabled, the memory is encrypted in the first kernel. In
this case, SME also needs to be enabled in the kdump kernel, and we have
to remap the old memory with the memory encryption mask.
The case of concern here is if SME is active in the first kernel,
and it is active too in the kdump kernel. There are four cases to be
considered:
a. dump vmcore
It is encrypted in the first kernel, and needs be read out in the
kdump kernel.
b. crash notes
When dumping vmcore, the people usually need to read useful
information from notes, and the notes is also encrypted.
c. iommu device table
It's encrypted in the first kernel, kdump kernel needs to access its
content to analyze and get information it needs.
d. mmio of AMD iommu
not encrypted in both kernels
Add a new bool parameter @encrypted to __ioremap_caller(). If set,
memory will be remapped with the SME mask.
Add a new function ioremap_encrypted() to explicitly pass in a true
value for @encrypted. Use ioremap_encrypted() for the above a, b, c
cases.
[ bp: cleanup commit message, extern defs in io.h and drop forgotten
include. ]
Signed-off-by: Lianbo Jiang <lijiang@redhat.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Cc: kexec@lists.infradead.org
Cc: tglx@linutronix.de
Cc: mingo@redhat.com
Cc: hpa@zytor.com
Cc: akpm@linux-foundation.org
Cc: dan.j.williams@intel.com
Cc: bhelgaas@google.com
Cc: baiyaowei@cmss.chinamobile.com
Cc: tiwai@suse.de
Cc: brijesh.singh@amd.com
Cc: dyoung@redhat.com
Cc: bhe@redhat.com
Cc: jroedel@suse.de
Link: https://lkml.kernel.org/r/20180927071954.29615-2-lijiang@redhat.com
|
|
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Signed-off-by: Takuya Yamamoto <tkyymmt01@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20180829072730.988-1-tkyymmt01@gmail.com
|
|
If we IPI for WBINDV, then we might as well kill the entire TLB too.
But if we don't have to invalidate cache, there is no reason not to
use a range TLB flush.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Dave Hansen <dave.hansen@intel.com>
Cc: Bin Yang <bin.yang@intel.com>
Cc: Mark Gross <mark.gross@intel.com>
Link: https://lkml.kernel.org/r/20180919085948.195633798@infradead.org
|
|
The start of cpa_flush_range() and cpa_flush_array() is the same, use
a common function.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Dave Hansen <dave.hansen@intel.com>
Cc: Bin Yang <bin.yang@intel.com>
Cc: Mark Gross <mark.gross@intel.com>
Link: https://lkml.kernel.org/r/20180919085948.138859183@infradead.org
|
|
Rather than guarding cpa_flush_array() users with a CLFLUSH test, put
it inside.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Dave Hansen <dave.hansen@intel.com>
Cc: Bin Yang <bin.yang@intel.com>
Cc: Mark Gross <mark.gross@intel.com>
Link: https://lkml.kernel.org/r/20180919085948.087848187@infradead.org
|
|
Rather than guarding all cpa_flush_range() uses with a CLFLUSH test,
put it inside.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Dave Hansen <dave.hansen@intel.com>
Cc: Bin Yang <bin.yang@intel.com>
Cc: Mark Gross <mark.gross@intel.com>
Link: https://lkml.kernel.org/r/20180919085948.036195503@infradead.org
|
|
Both cpa_flush_range() and cpa_flush_array() have a well specified
range, use that to do a range based TLB invalidate.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Dave Hansen <dave.hansen@intel.com>
Cc: Bin Yang <bin.yang@intel.com>
Cc: Mark Gross <mark.gross@intel.com>
Link: https://lkml.kernel.org/r/20180919085947.985193217@infradead.org
|
|
CAT has happened, WBINDV is bad (even before CAT blowing away the
entire cache on a multi-core platform wasn't nice), try not to use it
ever.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Dave Hansen <dave.hansen@intel.com>
Cc: Bin Yang <bin.yang@intel.com>
Cc: Mark Gross <mark.gross@intel.com>
Link: https://lkml.kernel.org/r/20180919085947.933674526@infradead.org
|
|
There is an atom errata, where we do a local TLB invalidate right
before we return and then do a global TLB invalidate.
Move the global invalidate up a little bit and avoid the local
invalidate entirely.
This does put the global invalidate under pgd_lock, but that shouldn't
matter.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Dave Hansen <dave.hansen@intel.com>
Cc: Bin Yang <bin.yang@intel.com>
Cc: Mark Gross <mark.gross@intel.com>
Link: https://lkml.kernel.org/r/20180919085947.882287392@infradead.org
|
|
Instead of open-coding it..
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Dave Hansen <dave.hansen@intel.com>
Cc: Bin Yang <bin.yang@intel.com>
Cc: Mark Gross <mark.gross@intel.com>
Link: https://lkml.kernel.org/r/20180919085947.831102058@infradead.org
|
|
The extra loop which tries hard to preserve large pages in case of conflicts
with static protection regions turns out to be not preserving anything, at
least not in the experiments which have been conducted.
There might be corner cases in which the code would be able to preserve a
large page oaccsionally, but it's really not worth the extra code and the
cycles wasted in the common case.
Before:
1G pages checked: 2
1G pages sameprot: 0
1G pages preserved: 0
2M pages checked: 541
2M pages sameprot: 466
2M pages preserved: 47
4K pages checked: 514
4K pages set-checked: 7668
After:
1G pages checked: 2
1G pages sameprot: 0
1G pages preserved: 0
2M pages checked: 538
2M pages sameprot: 466
2M pages preserved: 47
4K pages set-checked: 7668
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Dave Hansen <dave.hansen@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Bin Yang <bin.yang@intel.com>
Cc: Mark Gross <mark.gross@intel.com>
Link: https://lkml.kernel.org/r/20180917143546.589642503@linutronix.de
|
|
To avoid excessive 4k wise checks in the common case do a quick check first
whether the requested new page protections conflict with a static
protection area in the large page. If there is no conflict then the
decision whether to preserve or to split the page can be made immediately.
If the requested range covers the full large page, preserve it. Otherwise
split it up. No point in doing a slow crawl in 4k steps.
Before:
1G pages checked: 2
1G pages sameprot: 0
1G pages preserved: 0
2M pages checked: 538
2M pages sameprot: 466
2M pages preserved: 47
4K pages checked: 560642
4K pages set-checked: 7668
After:
1G pages checked: 2
1G pages sameprot: 0
1G pages preserved: 0
2M pages checked: 541
2M pages sameprot: 466
2M pages preserved: 47
4K pages checked: 514
4K pages set-checked: 7668
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Dave Hansen <dave.hansen@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Bin Yang <bin.yang@intel.com>
Cc: Mark Gross <mark.gross@intel.com>
Link: https://lkml.kernel.org/r/20180917143546.507259989@linutronix.de
|
|
When the existing mapping is correct and the new requested page protections
are the same as the existing ones, then further checks can be omitted and the
large page can be preserved. The slow path 4k wise check will not come up with
a different result.
Before:
1G pages checked: 2
1G pages sameprot: 0
1G pages preserved: 0
2M pages checked: 540
2M pages sameprot: 466
2M pages preserved: 47
4K pages checked: 800709
4K pages set-checked: 7668
After:
1G pages checked: 2
1G pages sameprot: 0
1G pages preserved: 0
2M pages checked: 538
2M pages sameprot: 466
2M pages preserved: 47
4K pages checked: 560642
4K pages set-checked: 7668
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Dave Hansen <dave.hansen@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Bin Yang <bin.yang@intel.com>
Cc: Mark Gross <mark.gross@intel.com>
Link: https://lkml.kernel.org/r/20180917143546.424477581@linutronix.de
|
|
With the range check it is possible to do a quick verification that the
current mapping is correct vs. the static protection areas.
In case a incorrect mapping is detected a warning is emitted and the large
page is split up. If the large page is a 2M page, then the split code is
forced to check the static protections for the PTE entries to fix up the
incorrectness. For 1G pages this can't be done easily because that would
require to either find the offending 2M areas before the split or
afterwards. For now just warn about that case and revisit it when reported.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Dave Hansen <dave.hansen@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Bin Yang <bin.yang@intel.com>
Cc: Mark Gross <mark.gross@intel.com>
Link: https://lkml.kernel.org/r/20180917143546.331408643@linutronix.de
|
|
If the new pgprot has the PRESENT bit cleared, then conflicts vs. RW/NX are
completely irrelevant.
Before:
1G pages checked: 2
1G pages sameprot: 0
1G pages preserved: 0
2M pages checked: 540
2M pages sameprot: 466
2M pages preserved: 47
4K pages checked: 800770
4K pages set-checked: 7668
After:
1G pages checked: 2
1G pages sameprot: 0
1G pages preserved: 0
2M pages checked: 540
2M pages sameprot: 466
2M pages preserved: 47
4K pages checked: 800709
4K pages set-checked: 7668
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Dave Hansen <dave.hansen@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Bin Yang <bin.yang@intel.com>
Cc: Mark Gross <mark.gross@intel.com>
Link: https://lkml.kernel.org/r/20180917143546.245849757@linutronix.de
|
|
The large page preservation mechanism is just magic and provides no
information at all. Add optional statistic output in debugfs so the magic can
be evaluated. Defaults is off.
Output:
1G pages checked: 2
1G pages sameprot: 0
1G pages preserved: 0
2M pages checked: 540
2M pages sameprot: 466
2M pages preserved: 47
4K pages checked: 800770
4K pages set-checked: 7668
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Dave Hansen <dave.hansen@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Bin Yang <bin.yang@intel.com>
Cc: Mark Gross <mark.gross@intel.com>
Link: https://lkml.kernel.org/r/20180917143546.160867778@linutronix.de
|
|
The whole static protection magic is silently fixing up anything which is
handed in. That's just wrong. The offending call sites need to be fixed.
Add a debug mechanism which emits a warning if a requested mapping needs to be
fixed up. The DETECT debug mechanism is really not meant to be enabled except
for developers, so limit the output hard to the protection fixups.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Dave Hansen <dave.hansen@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Bin Yang <bin.yang@intel.com>
Cc: Mark Gross <mark.gross@intel.com>
Link: https://lkml.kernel.org/r/20180917143546.078998733@linutronix.de
|
|
Checking static protections only page by page is slow especially for huge
pages. To allow quick checks over a complete range, add the ability to do
that.
Make the checks inclusive so the ranges can be directly used for debug output
later.
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Dave Hansen <dave.hansen@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Bin Yang <bin.yang@intel.com>
Cc: Mark Gross <mark.gross@intel.com>
Link: https://lkml.kernel.org/r/20180917143545.995734490@linutronix.de
|
|
static_protections() is pretty unreadable. Split it up into separate checks
for each protection area.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Dave Hansen <dave.hansen@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Bin Yang <bin.yang@intel.com>
Cc: Mark Gross <mark.gross@intel.com>
Link: https://lkml.kernel.org/r/20180917143545.913005317@linutronix.de
|
|
Avoid the extra variable and gotos by splitting the function into the
actual algorithm and a callable function which contains the lock
protection.
Rename it to should_split_large_page() while at it so the return values make
actually sense.
Clean up the code flow, comments and general whitespace damage while at it. No
functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Dave Hansen <dave.hansen@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Bin Yang <bin.yang@intel.com>
Cc: Mark Gross <mark.gross@intel.com>
Link: https://lkml.kernel.org/r/20180917143545.830507216@linutronix.de
|
|
The sequence of marking text and rodata read-only in 32bit init is:
set_ro(text);
kernel_set_to_readonly = 1;
set_ro(rodata);
When kernel_set_to_readonly is 1 it enables the protection mechanism in CPA
for the read only regions. With the upcoming checks for existing mappings
this consequently triggers the warning about an existing mapping being
incorrect vs. static protections because rodata has not been converted yet.
There is no technical reason to split the two, so just combine the RO
protection to convert text and rodata in one go.
Convert the printks to pr_info while at it.
Reported-by: kernel test robot <rong.a.chen@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Dave Hansen <dave.hansen@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Bin Yang <bin.yang@intel.com>
Cc: Mark Gross <mark.gross@intel.com>
Link: https://lkml.kernel.org/r/20180917143545.731701535@linutronix.de
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi into efi/core
Pull EFI updates for v4.20 from Ard Biesheuvel:
- Add support for enlisting the help of the EFI firmware to create memory
reservations that persist across kexec.
- Add page fault handling to the runtime services support code on x86 so
we can gracefully recover from buggy EFI firmware.
- Fix command line handling on x86 for the boot path that omits the stub's
PE/COFF entry point.
- Other assorted fixes.
|
|
Currently, IBPB is only issued in cases when switching into a non-dumpable
process, the rationale being to protect such 'important and security
sensitive' processess (such as GPG) from data leaking into a different
userspace process via spectre v2.
This is however completely insufficient to provide proper userspace-to-userpace
spectrev2 protection, as any process can poison branch buffers before being
scheduled out, and the newly scheduled process immediately becomes spectrev2
victim.
In order to minimize the performance impact (for usecases that do require
spectrev2 protection), issue the barrier only in cases when switching between
processess where the victim can't be ptraced by the potential attacker (as in
such cases, the attacker doesn't have to bother with branch buffers at all).
[ tglx: Split up PTRACE_MODE_NOACCESS_CHK into PTRACE_MODE_SCHED and
PTRACE_MODE_IBPB to be able to do ptrace() context tracking reasonably
fine-grained ]
Fixes: 18bf3c3ea8 ("x86/speculation: Use Indirect Branch Prediction Barrier in context switch")
Originally-by: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: "WoodhouseDavid" <dwmw@amazon.co.uk>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: "SchauflerCasey" <casey.schaufler@intel.com>
Link: https://lkml.kernel.org/r/nycvar.YFH.7.76.1809251437340.15880@cbobk.fhfr.pm
|
|
Memory accesses performed by UEFI runtime services should be limited to:
- reading/executing from EFI_RUNTIME_SERVICES_CODE memory regions
- reading/writing from/to EFI_RUNTIME_SERVICES_DATA memory regions
- reading/writing by-ref arguments
- reading/writing from/to the stack.
Accesses outside these regions may cause the kernel to hang because the
memory region requested by the firmware isn't mapped in efi_pgd, which
causes a page fault in ring 0 and the kernel fails to handle it, leading
to die(). To save kernel from hanging, add an EFI specific page fault
handler which recovers from such faults by
1. If the efi runtime service is efi_reset_system(), reboot the machine
through BIOS.
2. If the efi runtime service is _not_ efi_reset_system(), then freeze
efi_rts_wq and schedule a new process.
The EFI page fault handler offers us two advantages:
1. Avoid potential hangs caused by buggy firmware.
2. Shout loud that the firmware is buggy and hence is not a kernel bug.
Tested-by: Bhupesh Sharma <bhsharma@redhat.com>
Suggested-by: Matt Fleming <matt@codeblueprint.co.uk>
Based-on-code-from: Ricardo Neri <ricardo.neri@intel.com>
Signed-off-by: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
[ardb: clarify commit log]
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
|
|
Now that si_code == SEGV_PKUERR is the flag indicating that a pkey
is present there is no longer a need to pass a pointer to a local
pkey value, instead pkey can be passed more efficiently by value.
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
|
Now that the pkey handling has been removed force_sig_info_fault and
force_sig_fault perform identical work. Just the type of the address
paramter is different. So replace calls to force_sig_info_fault with
calls to force_sig_fault, and remove force_sig_info_fault.
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
|
There is only one code path that can generate a pkuerr signal. That
code path calls __bad_area_nosemaphore and can be dectected by testing
if si_code == SEGV_PKUERR. It can be seen from inspection that all of
the other tests in fill_sig_info_pkey are unnecessary.
Therefore call force_sig_pkuerr directly from __bad_area_semaphore and
remove fill_sig_info_pkey.
At the same time move the comment above force_sig_info_pkey into
bad_area_access_error, so that the documentation about pkey generation
races is not lost.
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
|
There is only one caller of __bad_area that passes in PKUERR and thus
will generate a siginfo with si_pkey set. Therefore simplify the
logic and hoist reading of vma_pkey up into that caller, and just
pass *pkey into __bad_area.
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
|
There are no more users of the computed pkey value in __do_page_fault
so stop computing the value.
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
|
After the previous cleanups to do_sigbus and and bad_area_nosemaphore
mm_fault_error no now longer uses it's pkey parameter. Therefore
remove the unused parameter.
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
|
The function do_sigbus never sets si_code to PKUERR so it can never
return a pkey to userspace. Therefore remove the unusable pkey
parameter from do_sigbus.
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
|
The function bad_area_nosemaphore always sets si_code to SEGV_MAPERR
and as such can never return a pkey parameter. Therefore remove the
unusable pkey parameter from bad_area_nosemaphore.
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
|
We met a kernel panic when enabling earlycon, which is due to the fixmap
address of earlycon is not statically setup.
Currently the static fixmap setup in head_64.S only covers 2M virtual
address space, while it actually could be in 4M space with different
kernel configurations, e.g. when VSYSCALL emulation is disabled.
So increase the static space to 4M for now by defining FIXMAP_PMD_NUM to 2,
and add a build time check to ensure that the fixmap is covered by the
initial static page tables.
Fixes: 1ad83c858c7d ("x86_64,vsyscall: Make vsyscall emulation configurable")
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Feng Tang <feng.tang@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: kernel test robot <rong.a.chen@intel.com>
Reviewed-by: Juergen Gross <jgross@suse.com> (Xen parts)
Cc: H Peter Anvin <hpa@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andy Lutomirsky <luto@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20180920025828.23699-1-feng.tang@intel.com
|
|
This separates the logic of generating the signal from the logic of
gathering the information about the bounds violation.
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
|
Only the call from do_sigbus will send SIGBUS due to a memory machine
check error. Consolidate all of the machine check signal generation
code in do_sigbus and remove the now unnecessary fault parameter from
force_sig_info_fault.
Explicitly use the now constant si_code BUS_ADRERR in the call
to force_sig_info_fault from do_sigbus.
This makes the code in arch/x86/mm/fault.c easier to follower and
simpler to maintain.
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
|
kvmclock defines few static variables which are shared with the
hypervisor during the kvmclock initialization.
When SEV is active, memory is encrypted with a guest-specific key, and
if the guest OS wants to share the memory region with the hypervisor
then it must clear the C-bit before sharing it.
Currently, we use kernel_physical_mapping_init() to split large pages
before clearing the C-bit on shared pages. But it fails when called from
the kvmclock initialization (mainly because the memblock allocator is
not ready that early during boot).
Add a __bss_decrypted section attribute which can be used when defining
such shared variable. The so-defined variables will be placed in the
.bss..decrypted section. This section will be mapped with C=0 early
during boot.
The .bss..decrypted section has a big chunk of memory that may be unused
when memory encryption is not active, free it when memory encryption is
not active.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <sean.j.christopherson@intel.com>
Cc: Radim Krčmář<rkrcmar@redhat.com>
Cc: kvm@vger.kernel.org
Link: https://lkml.kernel.org/r/1536932759-12905-2-git-send-email-brijesh.singh@amd.com
|
|
The SYSCALL64 trampoline has a couple of nice properties:
- The usual sequence of SWAPGS followed by two GS-relative accesses to
set up RSP is somewhat slow because the GS-relative accesses need
to wait for SWAPGS to finish. The trampoline approach allows
RIP-relative accesses to set up RSP, which avoids the stall.
- The trampoline avoids any percpu access before CR3 is set up,
which means that no percpu memory needs to be mapped in the user
page tables. This prevents using Meltdown to read any percpu memory
outside the cpu_entry_area and prevents using timing leaks
to directly locate the percpu areas.
The downsides of using a trampoline may outweigh the upsides, however.
It adds an extra non-contiguous I$ cache line to system calls, and it
forces an indirect jump to transfer control back to the normal kernel
text after CR3 is set up. The latter is because x86 lacks a 64-bit
direct jump instruction that could jump from the trampoline to the entry
text. With retpolines enabled, the indirect jump is extremely slow.
Change the code to map the percpu TSS into the user page tables to allow
the non-trampoline SYSCALL64 path to work under PTI. This does not add a
new direct information leak, since the TSS is readable by Meltdown from the
cpu_entry_area alias regardless. It does allow a timing attack to locate
the percpu area, but KASLR is more or less a lost cause against local
attack on CPUs vulnerable to Meltdown regardless. As far as I'm concerned,
on current hardware, KASLR is only useful to mitigate remote attacks that
try to attack the kernel without first gaining RCE against a vulnerable
user process.
On Skylake, with CONFIG_RETPOLINE=y and KPTI on, this reduces syscall
overhead from ~237ns to ~228ns.
There is a possible alternative approach: Move the trampoline within 2G of
the entry text and make a separate copy for each CPU. This would allow a
direct jump to rejoin the normal entry path. There are pro's and con's for
this approach:
+ It avoids a pipeline stall
- It executes from an extra page and read from another extra page during
the syscall. The latter is because it needs to use a relative
addressing mode to find sp1 -- it's the same *cacheline*, but accessed
using an alias, so it's an extra TLB entry.
- Slightly more memory. This would be one page per CPU for a simple
implementation and 64-ish bytes per CPU or one page per node for a more
complex implementation.
- More code complexity.
The current approach is chosen for simplicity and because the alternative
does not provide a significant benefit, which makes it worth.
[ tglx: Added the alternative discussion to the changelog ]
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Borislav Petkov <bp@suse.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lkml.kernel.org/r/8c7c6e483612c3e4e10ca89495dc160b1aa66878.1536015544.git.luto@kernel.org
|
