summaryrefslogtreecommitdiff
path: root/arch/x86/kvm
AgeCommit message (Collapse)AuthorFilesLines
2016-01-07kvm: x86: only channel 0 of the i8254 is linked to the HPETPaolo Bonzini2-1/+3
While setting the KVM PIT counters in 'kvm_pit_load_count', if 'hpet_legacy_start' is set, the function disables the timer on channel[0], instead of the respective index 'channel'. This is because channels 1-3 are not linked to the HPET. Fix the caller to only activate the special HPET processing for channel 0. Reported-by: P J P <pjp@fedoraproject.org> Fixes: 0185604c2d82c560dab2f2933a18f797e74ab5a8 Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-12-22KVM: x86: Reload pit counters for all channels when restoring stateAndrew Honig1-2/+6
Currently if userspace restores the pit counters with a count of 0 on channels 1 or 2 and the guest attempts to read the count on those channels, then KVM will perform a mod of 0 and crash. This will ensure that 0 values are converted to 65536 as per the spec. This is CVE-2015-7513. Signed-off-by: Andy Honig <ahonig@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-12-22KVM: MTRR: treat memory as writeback if MTRR is disabled in guest CPUIDPaolo Bonzini2-3/+19
Virtual machines can be run with CPUID such that there are no MTRRs. In that case, the firmware will never enable MTRRs and it is obviously undesirable to run the guest entirely with UC memory. Check out guest CPUID, and use WB memory if MTRR do not exist. Cc: qemu-stable@nongnu.org Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=107561 Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-12-22KVM: MTRR: observe maxphyaddr from guest CPUID, not hostPaolo Bonzini1-2/+7
Conversion of MTRRs to ranges used the maxphyaddr from the boot CPU. This is wrong, because var_mtrr_range's mask variable then is discontiguous (like FF00FFFF000, where the first run of 0s corresponds to the bits between host and guest maxphyaddr). Instead always set up the masks to be full 64-bit values---we know that the reserved bits at the top are zero, and we can restore them when reading the MSR. This way var_mtrr_range gets a mask that just works. Fixes: a13842dc668b40daef4327294a6d3bdc8bd30276 Cc: qemu-stable@nongnu.org Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=107561 Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-12-22KVM: MTRR: fix fixed MTRR segment look upAlexis Dambricourt1-1/+1
This fixes the slow-down of VM running with pci-passthrough, since some MTRR range changed from MTRR_TYPE_WRBACK to MTRR_TYPE_UNCACHABLE. Memory in the 0K-640K range was incorrectly treated as uncacheable. Fixes: f7bfb57b3e89ff89c0da9f93dedab89f68d6ca27 Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=107561 Cc: qemu-stable@nongnu.org Signed-off-by: Alexis Dambricourt <alexis.dambricourt@gmail.com> [Use correct BZ for "Fixes" annotation. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-12-14KVM: VMX: Fix host initiated access to guest MSR_TSC_AUXHaozhong Zhang1-2/+2
The current handling of accesses to guest MSR_TSC_AUX returns error if vcpu does not support rdtscp, though those accesses are initiated by host. This can result in the reboot failure of some versions of QEMU. This patch fixes this issue by passing those host initiated accesses for further handling instead. Signed-off-by: Haozhong Zhang <haozhong.zhang@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-12-11kvm: x86: move tracepoints outside extended quiescent statePaolo Bonzini3-5/+6
Invoking tracepoints within kvm_guest_enter/kvm_guest_exit causes a lockdep splat. Reported-by: Borislav Petkov <bp@alien8.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-11-25KVM: nVMX: remove incorrect vpid check in nested invvpid emulationHaozhong Zhang1-5/+0
This patch removes the vpid check when emulating nested invvpid instruction of type all-contexts invalidation. The existing code is incorrect because: (1) According to Intel SDM Vol 3, Section "INVVPID - Invalidate Translations Based on VPID", invvpid instruction does not check vpid in the invvpid descriptor when its type is all-contexts invalidation. (2) According to the same document, invvpid of type all-contexts invalidation does not require there is an active VMCS, so/and get_vmcs12() in the existing code may result in a NULL-pointer dereference. In practice, it can crash both KVM itself and L1 hypervisors that use invvpid (e.g. Xen). Signed-off-by: Haozhong Zhang <haozhong.zhang@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-11-18KVM: x86: request interrupt window when IRQ chip is splitMatt Gingell1-2/+4
Before this patch, we incorrectly enter the guest without requesting an interrupt window if the IRQ chip is split between user space and the kernel. Because lapic_in_kernel no longer implies the PIC is in the kernel, this patch tests pic_in_kernel to determining whether an interrupt window should be requested when entering the guest. If the APIC is in the kernel and we request an interrupt window the guest will return immediately. If the APIC is masked the guest will not not make forward progress and unmask it, leading to a loop when KVM reenters and requests again. This patch adds a check to ensure the APIC is ready to accept an interrupt before requesting a window. Reviewed-by: Steve Rutherford <srutherford@google.com> Signed-off-by: Matt Gingell <gingell@google.com> [Use the other newly introduced functions. - Paolo] Fixes: 1c1a9ce973a7863dd46767226bce2a5f12d48bc6 Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-11-18KVM: x86: set KVM_REQ_EVENT on local interrupt request from user spaceMatt Gingell1-0/+1
Set KVM_REQ_EVENT when a PIC in user space injects a local interrupt. Currently a request is only made when neither the PIC nor the APIC is in the kernel, which is not sufficient in the split IRQ chip case. This addresses a problem in QEMU where interrupts are delayed until another path invokes the event loop. Reviewed-by: Steve Rutherford <srutherford@google.com> Signed-off-by: Matt Gingell <gingell@google.com> Fixes: 1c1a9ce973a7863dd46767226bce2a5f12d48bc6 Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-11-18KVM: x86: split kvm_vcpu_ready_for_interrupt_injection out of ↵Matt Gingell1-24/+19
dm_request_for_irq_injection This patch breaks out a new function kvm_vcpu_ready_for_interrupt_injection. This routine encapsulates the logic required to determine whether a vcpu is ready to accept an interrupt injection, which is now required on multiple paths. Reviewed-by: Steve Rutherford <srutherford@google.com> Signed-off-by: Matt Gingell <gingell@google.com> Fixes: 1c1a9ce973a7863dd46767226bce2a5f12d48bc6 Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-11-18KVM: x86: fix interrupt window handling in split IRQ chip caseMatt Gingell1-14/+19
This patch ensures that dm_request_for_irq_injection and post_kvm_run_save are in sync, avoiding that an endless ping-pong between userspace (who correctly notices that IF=0) and the kernel (who insists that userspace handles its request for the interrupt window). To synchronize them, it also adds checks for kvm_arch_interrupt_allowed and !kvm_event_needs_reinjection. These are always needed, not just for in-kernel LAPIC. Signed-off-by: Matt Gingell <gingell@google.com> [A collage of two patches from Matt. - Paolo] Fixes: 1c1a9ce973a7863dd46767226bce2a5f12d48bc6 Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-11-13Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds7-194/+209
Pull second batch of kvm updates from Paolo Bonzini: "Four changes: - x86: work around two nasty cases where a benign exception occurs while another is being delivered. The endless stream of exceptions causes an infinite loop in the processor, which not even NMIs or SMIs can interrupt; in the virt case, there is no possibility to exit to the host either. - x86: support for Skylake per-guest TSC rate. Long supported by AMD, the patches mostly move things from there to common arch/x86/kvm/ code. - generic: remove local_irq_save/restore from the guest entry and exit paths when context tracking is enabled. The patches are a few months old, but we discussed them again at kernel summit. Andy will pick up from here and, in 4.5, try to remove it from the user entry/exit paths. - PPC: Two bug fixes, see merge commit 370289756becc for details" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (21 commits) KVM: x86: rename update_db_bp_intercept to update_bp_intercept KVM: svm: unconditionally intercept #DB KVM: x86: work around infinite loop in microcode when #AC is delivered context_tracking: avoid irq_save/irq_restore on guest entry and exit context_tracking: remove duplicate enabled check KVM: VMX: Dump TSC multiplier in dump_vmcs() KVM: VMX: Use a scaled host TSC for guest readings of MSR_IA32_TSC KVM: VMX: Setup TSC scaling ratio when a vcpu is loaded KVM: VMX: Enable and initialize VMX TSC scaling KVM: x86: Use the correct vcpu's TSC rate to compute time scale KVM: x86: Move TSC scaling logic out of call-back read_l1_tsc() KVM: x86: Move TSC scaling logic out of call-back adjust_tsc_offset() KVM: x86: Replace call-back compute_tsc_offset() with a common function KVM: x86: Replace call-back set_tsc_khz() with a common function KVM: x86: Add a common TSC scaling function KVM: x86: Add a common TSC scaling ratio field in kvm_vcpu_arch KVM: x86: Collect information for setting TSC scaling ratio KVM: x86: declare a few variables as __read_mostly KVM: x86: merge handle_mmio_page_fault and handle_mmio_page_fault_common KVM: PPC: Book3S HV: Don't dynamically split core when already split ...
2015-11-10KVM: x86: rename update_db_bp_intercept to update_bp_interceptPaolo Bonzini3-3/+3
Because #DB is now intercepted unconditionally, this callback only operates on #BP for both VMX and SVM. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-11-10KVM: svm: unconditionally intercept #DBPaolo Bonzini1-11/+3
This is needed to avoid the possibility that the guest triggers an infinite stream of #DB exceptions (CVE-2015-8104). VMX is not affected: because it does not save DR6 in the VMCS, it already intercepts #DB unconditionally. Reported-by: Jan Beulich <jbeulich@suse.com> Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-11-10KVM: x86: work around infinite loop in microcode when #AC is deliveredEric Northup2-1/+12
It was found that a guest can DoS a host by triggering an infinite stream of "alignment check" (#AC) exceptions. This causes the microcode to enter an infinite loop where the core never receives another interrupt. The host kernel panics pretty quickly due to the effects (CVE-2015-5307). Signed-off-by: Eric Northup <digitaleric@google.com> Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-11-10KVM: VMX: Dump TSC multiplier in dump_vmcs()Haozhong Zhang1-0/+3
This patch enhances dump_vmcs() to dump the value of TSC multiplier field in VMCS. Signed-off-by: Haozhong Zhang <haozhong.zhang@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-11-10KVM: VMX: Use a scaled host TSC for guest readings of MSR_IA32_TSCHaozhong Zhang1-4/+5
This patch makes kvm-intel to return a scaled host TSC plus the TSC offset when handling guest readings to MSR_IA32_TSC. Signed-off-by: Haozhong Zhang <haozhong.zhang@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-11-10KVM: VMX: Setup TSC scaling ratio when a vcpu is loadedHaozhong Zhang1-0/+6
This patch makes kvm-intel module to load TSC scaling ratio into TSC multiplier field of VMCS when a vcpu is loaded, so that TSC scaling ratio can take effect if VMX TSC scaling is enabled. Signed-off-by: Haozhong Zhang <haozhong.zhang@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-11-10KVM: VMX: Enable and initialize VMX TSC scalingHaozhong Zhang1-1/+16
This patch exhances kvm-intel module to enable VMX TSC scaling and collects information of TSC scaling ratio during initialization. Signed-off-by: Haozhong Zhang <haozhong.zhang@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-11-10KVM: x86: Use the correct vcpu's TSC rate to compute time scaleHaozhong Zhang1-2/+4
This patch makes KVM use virtual_tsc_khz rather than the host TSC rate as vcpu's TSC rate to compute the time scale if TSC scaling is enabled. Signed-off-by: Haozhong Zhang <haozhong.zhang@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-11-10KVM: x86: Move TSC scaling logic out of call-back read_l1_tsc()Haozhong Zhang3-7/+11
Both VMX and SVM scales the host TSC in the same way in call-back read_l1_tsc(), so this patch moves the scaling logic from call-back read_l1_tsc() to a common function kvm_read_l1_tsc(). Signed-off-by: Haozhong Zhang <haozhong.zhang@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-11-10KVM: x86: Move TSC scaling logic out of call-back adjust_tsc_offset()Haozhong Zhang3-10/+18
For both VMX and SVM, if the 2nd argument of call-back adjust_tsc_offset() is the host TSC, then adjust_tsc_offset() will scale it first. This patch moves this common TSC scaling logic to its caller adjust_tsc_offset_host() and rename the call-back adjust_tsc_offset() to adjust_tsc_offset_guest(). Signed-off-by: Haozhong Zhang <haozhong.zhang@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-11-10KVM: x86: Replace call-back compute_tsc_offset() with a common functionHaozhong Zhang3-19/+12
Both VMX and SVM calculate the tsc-offset in the same way, so this patch removes the call-back compute_tsc_offset() and replaces it with a common function kvm_compute_tsc_offset(). Signed-off-by: Haozhong Zhang <haozhong.zhang@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-11-10KVM: x86: Replace call-back set_tsc_khz() with a common functionHaozhong Zhang3-58/+41
Both VMX and SVM propagate virtual_tsc_khz in the same way, so this patch removes the call-back set_tsc_khz() and replaces it with a common function. Signed-off-by: Haozhong Zhang <haozhong.zhang@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-11-10KVM: x86: Add a common TSC scaling functionHaozhong Zhang2-45/+43
VMX and SVM calculate the TSC scaling ratio in a similar logic, so this patch generalizes it to a common TSC scaling function. Signed-off-by: Haozhong Zhang <haozhong.zhang@intel.com> [Inline the multiplication and shift steps into mul_u64_u64_shr. Remove BUG_ON. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-11-10KVM: x86: Add a common TSC scaling ratio field in kvm_vcpu_archHaozhong Zhang2-16/+19
This patch moves the field of TSC scaling ratio from the architecture struct vcpu_svm to the common struct kvm_vcpu_arch. Signed-off-by: Haozhong Zhang <haozhong.zhang@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-11-10KVM: x86: Collect information for setting TSC scaling ratioHaozhong Zhang2-0/+7
The number of bits of the fractional part of the 64-bit TSC scaling ratio in VMX and SVM is different. This patch makes the architecture code to collect the number of fractional bits and other related information into variables that can be accessed in the common code. Signed-off-by: Haozhong Zhang <haozhong.zhang@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-11-10KVM: x86: declare a few variables as __read_mostlyPaolo Bonzini1-7/+7
These include module parameters and variables that are set by kvm_x86_ops->hardware_setup. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-11-10KVM: x86: merge handle_mmio_page_fault and handle_mmio_page_fault_commonPaolo Bonzini4-21/+10
They are exactly the same, except that handle_mmio_page_fault has an unused argument and a call to WARN_ON. Remove the unused argument from the callers, and move the warning to (the former) handle_mmio_page_fault_common. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-11-06Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds20-421/+1336
Pull KVM updates from Paolo Bonzini: "First batch of KVM changes for 4.4. s390: A bunch of fixes and optimizations for interrupt and time handling. PPC: Mostly bug fixes. ARM: No big features, but many small fixes and prerequisites including: - a number of fixes for the arch-timer - introducing proper level-triggered semantics for the arch-timers - a series of patches to synchronously halt a guest (prerequisite for IRQ forwarding) - some tracepoint improvements - a tweak for the EL2 panic handlers - some more VGIC cleanups getting rid of redundant state x86: Quite a few changes: - support for VT-d posted interrupts (i.e. PCI devices can inject interrupts directly into vCPUs). This introduces a new component (in virt/lib/) that connects VFIO and KVM together. The same infrastructure will be used for ARM interrupt forwarding as well. - more Hyper-V features, though the main one Hyper-V synthetic interrupt controller will have to wait for 4.5. These will let KVM expose Hyper-V devices. - nested virtualization now supports VPID (same as PCID but for vCPUs) which makes it quite a bit faster - for future hardware that supports NVDIMM, there is support for clflushopt, clwb, pcommit - support for "split irqchip", i.e. LAPIC in kernel + IOAPIC/PIC/PIT in userspace, which reduces the attack surface of the hypervisor - obligatory smattering of SMM fixes - on the guest side, stable scheduler clock support was rewritten to not require help from the hypervisor" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (123 commits) KVM: VMX: Fix commit which broke PML KVM: x86: obey KVM_X86_QUIRK_CD_NW_CLEARED in kvm_set_cr0() KVM: x86: allow RSM from 64-bit mode KVM: VMX: fix SMEP and SMAP without EPT KVM: x86: move kvm_set_irq_inatomic to legacy device assignment KVM: device assignment: remove pointless #ifdefs KVM: x86: merge kvm_arch_set_irq with kvm_set_msi_inatomic KVM: x86: zero apic_arb_prio on reset drivers/hv: share Hyper-V SynIC constants with userspace KVM: x86: handle SMBASE as physical address in RSM KVM: x86: add read_phys to x86_emulate_ops KVM: x86: removing unused variable KVM: don't pointlessly leave KVM_COMPAT=y in non-KVM configs KVM: arm/arm64: Merge vgic_set_lr() and vgic_sync_lr_elrsr() KVM: arm/arm64: Clean up vgic_retire_lr() and surroundings KVM: arm/arm64: Optimize away redundant LR tracking KVM: s390: use simple switch statement as multiplexer KVM: s390: drop useless newline in debugging data KVM: s390: SCA must not cross page boundaries KVM: arm: Do not indent the arguments of DECLARE_BITMAP ...
2015-11-05KVM: VMX: Fix commit which broke PMLKai Huang1-13/+11
I found PML was broken since below commit: commit feda805fe7c4ed9cf78158e73b1218752e3b4314 Author: Xiao Guangrong <guangrong.xiao@linux.intel.com> Date: Wed Sep 9 14:05:55 2015 +0800 KVM: VMX: unify SECONDARY_VM_EXEC_CONTROL update Unify the update in vmx_cpuid_update() Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com> [Rewrite to use vmcs_set_secondary_exec_control. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> The reason is in above commit vmx_cpuid_update calls vmx_secondary_exec_control, in which currently SECONDARY_EXEC_ENABLE_PML bit is cleared unconditionally (as PML is enabled in creating vcpu). Therefore if vcpu_cpuid_update is called after vcpu is created, PML will be disabled unexpectedly while log-dirty code still thinks PML is used. Fix this by clearing SECONDARY_EXEC_ENABLE_PML in vmx_secondary_exec_control only when PML is not supported or not enabled (!enable_pml). This is more reasonable as PML is currently either always enabled or disabled. With this explicit updating SECONDARY_EXEC_ENABLE_PML in vmx_enable{disable}_pml is not needed so also rename vmx_enable{disable}_pml to vmx_create{destroy}_pml_buffer. Fixes: feda805fe7c4ed9cf78158e73b1218752e3b4314 Signed-off-by: Kai Huang <kai.huang@linux.intel.com> [While at it, change a wrong ASSERT to an "if". The condition can happen if creating the VCPU fails with ENOMEM. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-11-04KVM: x86: obey KVM_X86_QUIRK_CD_NW_CLEARED in kvm_set_cr0()Laszlo Ersek1-1/+3
Commit b18d5431acc7 ("KVM: x86: fix CR0.CD virtualization") was technically correct, but it broke OVMF guests by slowing down various parts of the firmware. Commit fb279950ba02 ("KVM: vmx: obey KVM_QUIRK_CD_NW_CLEARED") quirked the first function modified by b18d5431acc7, vmx_get_mt_mask(), for OVMF's sake. This restored the speed of the OVMF code that runs before PlatformPei (including the memory intensive LZMA decompression in SEC). This patch extends the quirk to the second function modified by b18d5431acc7, kvm_set_cr0(). It eliminates the intrusive slowdown that hits the EFI_MP_SERVICES_PROTOCOL implementation of edk2's UefiCpuPkg/CpuDxe -- which is built into OVMF --, when CpuDxe starts up all APs at once for initialization, in order to count them. We also carry over the kvm_arch_has_noncoherent_dma() sub-condition from the other half of the original commit b18d5431acc7. Fixes: b18d5431acc7a2fd22767925f3a6f597aa4bd29e Cc: stable@vger.kernel.org Cc: Jordan Justen <jordan.l.justen@intel.com> Cc: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: Xiao Guangrong <guangrong.xiao@linux.intel.com> Tested-by: Janusz Mocek <januszmk6@gmail.com> Signed-off-by: Laszlo Ersek <lersek@redhat.com># Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-11-04KVM: x86: allow RSM from 64-bit modePaolo Bonzini1-5/+25
The SDM says that exiting system management mode from 64-bit mode is invalid, but that would be too good to be true. But actually, most of the code is already there to support exiting from compat mode (EFER.LME=1, EFER.LMA=0). Getting all the way from 64-bit mode to real mode only requires clearing CS.L and CR4.PCIDE. Cc: stable@vger.kernel.org Fixes: 660a5d517aaab9187f93854425c4c63f4a09195c Tested-by: Laszlo Ersek <lersek@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-11-04KVM: VMX: fix SMEP and SMAP without EPTRadim Krčmář1-9/+10
The comment in code had it mostly right, but we enable paging for emulated real mode regardless of EPT. Without EPT (which implies emulated real mode), secondary VCPUs won't start unless we disable SM[AE]P when the guest doesn't use paging. Signed-off-by: Radim Krčmář <rkrcmar@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-11-04KVM: x86: move kvm_set_irq_inatomic to legacy device assignmentPaolo Bonzini2-34/+37
The function is not used outside device assignment, and kvm_arch_set_irq_inatomic has a different prototype. Move it here and make it static to avoid confusion. Reviewed-by: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-11-04KVM: device assignment: remove pointless #ifdefsPaolo Bonzini1-25/+0
The symbols are always defined. Reviewed-by: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-11-04KVM: x86: merge kvm_arch_set_irq with kvm_set_msi_inatomicPaolo Bonzini1-6/+8
We do not want to do too much work in atomic context, in particular not walking all the VCPUs of the virtual machine. So we want to distinguish the architecture-specific injection function for irqfd from kvm_set_msi. Since it's still empty, reuse the newly added kvm_arch_set_irq and rename it to kvm_arch_set_irq_inatomic. Reviewed-by: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-11-04KVM: x86: zero apic_arb_prio on resetRadim Krčmář1-0/+2
BSP doesn't get INIT so its apic_arb_prio isn't zeroed after reboot. BSP won't get lowest priority interrupts until other VCPUs get enough interrupts to match their pre-reboot apic_arb_prio. That behavior doesn't fit into KVM's round-robin-like interpretation of lowest priority delivery ... userspace should KVM_SET_LAPIC on reset, so just zero apic_arb_prio there. Reported-by: Yuki Shibuya <shibuya.yk@ncos.nec.co.jp> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-11-04KVM: x86: handle SMBASE as physical address in RSMRadim Krčmář1-4/+3
GET_SMSTATE depends on real mode to ensure that smbase+offset is treated as a physical address, which has already caused a bug after shuffling the code. Enforce physical addressing. Signed-off-by: Radim Krčmář <rkrcmar@redhat.com> Reported-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-11-04KVM: x86: add read_phys to x86_emulate_opsRadim Krčmář1-0/+10
We want to read the physical memory when emulating RSM. X86EMUL_IO_NEEDED is returned on all errors for consistency with other helpers. Signed-off-by: Radim Krčmář <rkrcmar@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-11-04KVM: x86: removing unused variableSaurabh Sengar1-11/+5
removing unused variables, found by coccinelle Signed-off-by: Saurabh Sengar <saurabh.truth@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-11-04Merge branch 'x86-fpu-for-linus' of ↵Linus Torvalds3-18/+19
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fpu changes from Ingo Molnar: "There are two main areas of changes: - Rework of the extended FPU state code to robustify the kernel's usage of cpuid provided xstate sizes - and related changes (Dave Hansen)" - math emulation enhancements: new modern FPU instructions support, with testcases, plus cleanups (Denys Vlasnko)" * 'x86-fpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits) x86/fpu: Fixup uninitialized feature_name warning x86/fpu/math-emu: Add support for FISTTP instructions x86/fpu/math-emu, selftests: Add test for FISTTP instructions x86/fpu/math-emu: Add support for FCMOVcc insns x86/fpu/math-emu: Add support for F[U]COMI[P] insns x86/fpu/math-emu: Remove define layer for undocumented opcodes x86/fpu/math-emu, selftests: Add tests for FCMOV and FCOMI insns x86/fpu/math-emu: Remove !NO_UNDOC_CODE x86/fpu: Check CPU-provided sizes against struct declarations x86/fpu: Check to ensure increasing-offset xstate offsets x86/fpu: Correct and check XSAVE xstate size calculations x86/fpu: Add C structures for AVX-512 state components x86/fpu: Rework YMM definition x86/fpu/mpx: Rework MPX 'xstate' types x86/fpu: Add xfeature_enabled() helper instead of test_bit() x86/fpu: Remove 'xfeature_nr' x86/fpu: Rework XSTATE_* macros to remove magic '2' x86/fpu: Rename XFEATURES_NR_MAX x86/fpu: Rename XSAVE macros x86/fpu: Remove partial LWP support definitions ...
2015-10-19KVM: x86: MMU: Initialize force_pt_level before calling mapping_level()Takuya Yoshikawa2-4/+5
Commit fd1369021878 ("KVM: x86: MMU: Move mapping_level_dirty_bitmap() call in mapping_level()") forgot to initialize force_pt_level to false in FNAME(page_fault)() before calling mapping_level() like nonpaging_map() does. This can sometimes result in forcing page table level mapping unnecessarily. Fix this and move the first *force_pt_level check in mapping_level() before kvm_vcpu_gfn_to_memslot() call to make it a bit clearer that the variable must be initialized before mapping_level() gets called. This change can also avoid calling kvm_vcpu_gfn_to_memslot() when !check_hugepage_cache_consistency() check in tdp_page_fault() forces page table level mapping. Signed-off-by: Takuya Yoshikawa <yoshikawa_takuya_b1@lab.ntt.co.jp> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-19kvm: x86: zero EFER on INITPaolo Bonzini2-8/+6
Not zeroing EFER means that a 32-bit firmware cannot enter paging mode without clearing EFER.LME first (which it should not know about). Yang Zhang from Intel confirmed that the manual is wrong and EFER is cleared to zero on INIT. Fixes: d28bc9dd25ce023270d2e039e7c98d38ecbf7758 Cc: stable@vger.kernel.org Cc: Yang Z Zhang <yang.z.zhang@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-16KVM: x86: move steal time initialization to vcpu entry timeMarcelo Tosatti1-7/+2
As reported at https://bugs.launchpad.net/qemu/+bug/1494350, it is possible to have vcpu->arch.st.last_steal initialized from a thread other than vcpu thread, say the iothread, via KVM_SET_MSRS. Which can cause an overflow later (when subtracting from vcpu threads sched_info.run_delay). To avoid that, move steal time accumulation to vcpu entry time, before copying steal time data to guest. Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Reviewed-by: David Matlack <dmatlack@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-16KVM: x86: MMU: Eliminate an extra memory slot search in mapping_level()Takuya Yoshikawa1-6/+11
Calling kvm_vcpu_gfn_to_memslot() twice in mapping_level() should be avoided since getting a slot by binary search may not be negligible, especially for virtual machines with many memory slots. Signed-off-by: Takuya Yoshikawa <yoshikawa_takuya_b1@lab.ntt.co.jp> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-16KVM: x86: MMU: Remove mapping_level_dirty_bitmap()Takuya Yoshikawa1-8/+16
Now that it has only one caller, and its name is not so helpful for readers, remove it. The new memslot_valid_for_gpte() function makes it possible to share the common code between gfn_to_memslot_dirty_bitmap() and mapping_level(). Signed-off-by: Takuya Yoshikawa <yoshikawa_takuya_b1@lab.ntt.co.jp> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-16KVM: x86: MMU: Move mapping_level_dirty_bitmap() call in mapping_level()Takuya Yoshikawa2-18/+17
This is necessary to eliminate an extra memory slot search later. Signed-off-by: Takuya Yoshikawa <yoshikawa_takuya_b1@lab.ntt.co.jp> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-16KVM: x86: MMU: Simplify force_pt_level calculation code in FNAME(page_fault)()Takuya Yoshikawa1-8/+7
As a bonus, an extra memory slot search can be eliminated when is_self_change_mapping is true. Signed-off-by: Takuya Yoshikawa <yoshikawa_takuya_b1@lab.ntt.co.jp> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-26 09:00:04 +0300