summaryrefslogtreecommitdiff
path: root/arch/x86/kvm
AgeCommit message (Collapse)AuthorFilesLines
2017-09-04Merge branch 'x86-mm-for-linus' of ↵Linus Torvalds4-26/+55
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 mm changes from Ingo Molnar: "PCID support, 5-level paging support, Secure Memory Encryption support The main changes in this cycle are support for three new, complex hardware features of x86 CPUs: - Add 5-level paging support, which is a new hardware feature on upcoming Intel CPUs allowing up to 128 PB of virtual address space and 4 PB of physical RAM space - a 512-fold increase over the old limits. (Supercomputers of the future forecasting hurricanes on an ever warming planet can certainly make good use of more RAM.) Many of the necessary changes went upstream in previous cycles, v4.14 is the first kernel that can enable 5-level paging. This feature is activated via CONFIG_X86_5LEVEL=y - disabled by default. (By Kirill A. Shutemov) - Add 'encrypted memory' support, which is a new hardware feature on upcoming AMD CPUs ('Secure Memory Encryption', SME) allowing system RAM to be encrypted and decrypted (mostly) transparently by the CPU, with a little help from the kernel to transition to/from encrypted RAM. Such RAM should be more secure against various attacks like RAM access via the memory bus and should make the radio signature of memory bus traffic harder to intercept (and decrypt) as well. This feature is activated via CONFIG_AMD_MEM_ENCRYPT=y - disabled by default. (By Tom Lendacky) - Enable PCID optimized TLB flushing on newer Intel CPUs: PCID is a hardware feature that attaches an address space tag to TLB entries and thus allows to skip TLB flushing in many cases, even if we switch mm's. (By Andy Lutomirski) All three of these features were in the works for a long time, and it's coincidence of the three independent development paths that they are all enabled in v4.14 at once" * 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (65 commits) x86/mm: Enable RCU based page table freeing (CONFIG_HAVE_RCU_TABLE_FREE=y) x86/mm: Use pr_cont() in dump_pagetable() x86/mm: Fix SME encryption stack ptr handling kvm/x86: Avoid clearing the C-bit in rsvd_bits() x86/CPU: Align CR3 defines x86/mm, mm/hwpoison: Clear PRESENT bit for kernel 1:1 mappings of poison pages acpi, x86/mm: Remove encryption mask from ACPI page protection type x86/mm, kexec: Fix memory corruption with SME on successive kexecs x86/mm/pkeys: Fix typo in Documentation/x86/protection-keys.txt x86/mm/dump_pagetables: Speed up page tables dump for CONFIG_KASAN=y x86/mm: Implement PCID based optimization: try to preserve old TLB entries using PCID x86: Enable 5-level paging support via CONFIG_X86_5LEVEL=y x86/mm: Allow userspace have mappings above 47-bit x86/mm: Prepare to expose larger address space to userspace x86/mpx: Do not allow MPX if we have mappings above 47-bit x86/mm: Rename tasksize_32bit/64bit to task_size_32bit/64bit() x86/xen: Redefine XEN_ELFNOTE_INIT_P2M using PUD_SIZE * PTRS_PER_PUD x86/mm/dump_pagetables: Fix printout of p4d level x86/mm/dump_pagetables: Generalize address normalization x86/boot: Fix memremap() related build failure ...
2017-09-04Merge branch 'x86-asm-for-linus' of ↵Linus Torvalds1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 asm updates from Ingo Molnar: - Introduce the ORC unwinder, which can be enabled via CONFIG_ORC_UNWINDER=y. The ORC unwinder is a lightweight, Linux kernel specific debuginfo implementation, which aims to be DWARF done right for unwinding. Objtool is used to generate the ORC unwinder tables during build, so the data format is flexible and kernel internal: there's no dependency on debuginfo created by an external toolchain. The ORC unwinder is almost two orders of magnitude faster than the (out of tree) DWARF unwinder - which is important for perf call graph profiling. It is also significantly simpler and is coded defensively: there has not been a single ORC related kernel crash so far, even with early versions. (knock on wood!) But the main advantage is that enabling the ORC unwinder allows CONFIG_FRAME_POINTERS to be turned off - which speeds up the kernel measurably: With frame pointers disabled, GCC does not have to add frame pointer instrumentation code to every function in the kernel. The kernel's .text size decreases by about 3.2%, resulting in better cache utilization and fewer instructions executed, resulting in a broad kernel-wide speedup. Average speedup of system calls should be roughly in the 1-3% range - measurements by Mel Gorman [1] have shown a speedup of 5-10% for some function execution intense workloads. The main cost of the unwinder is that the unwinder data has to be stored in RAM: the memory cost is 2-4MB of RAM, depending on kernel config - which is a modest cost on modern x86 systems. Given how young the ORC unwinder code is it's not enabled by default - but given the performance advantages the plan is to eventually make it the default unwinder on x86. See Documentation/x86/orc-unwinder.txt for more details. - Remove lguest support: its intended role was that of a temporary proof of concept for virtualization, plus its removal will enable the reduction (removal) of the paravirt API as well, so Rusty agreed to its removal. (Juergen Gross) - Clean up and fix FSGS related functionality (Andy Lutomirski) - Clean up IO access APIs (Andy Shevchenko) - Enhance the symbol namespace (Jiri Slaby) * 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (47 commits) objtool: Handle GCC stack pointer adjustment bug x86/entry/64: Use ENTRY() instead of ALIGN+GLOBAL for stub32_clone() x86/fpu/math-emu: Add ENDPROC to functions x86/boot/64: Extract efi_pe_entry() from startup_64() x86/boot/32: Extract efi_pe_entry() from startup_32() x86/lguest: Remove lguest support x86/paravirt/xen: Remove xen_patch() objtool: Fix objtool fallthrough detection with function padding x86/xen/64: Fix the reported SS and CS in SYSCALL objtool: Track DRAP separately from callee-saved registers objtool: Fix validate_branch() return codes x86: Clarify/fix no-op barriers for text_poke_bp() x86/switch_to/64: Rewrite FS/GS switching yet again to fix AMD CPUs selftests/x86/fsgsbase: Test selectors 1, 2, and 3 x86/fsgsbase/64: Report FSBASE and GSBASE correctly in core dumps x86/fsgsbase/64: Fully initialize FS and GS state in start_thread_common x86/asm: Fix UNWIND_HINT_REGS macro for older binutils x86/asm/32: Fix regs_get_register() on segment registers x86/xen/64: Rearrange the SYSCALL entries x86/asm/32: Remove a bunch of '& 0xffff' from pt_regs segment reads ...
2017-09-01KVM: update to new mmu_notifier semantic v2Jérôme Glisse1-11/+0
Calls to mmu_notifier_invalidate_page() were replaced by calls to mmu_notifier_invalidate_range() and are now bracketed by calls to mmu_notifier_invalidate_range_start()/end() Remove now useless invalidate_page callback. Changed since v1 (Linus Torvalds) - remove now useless kvm_arch_mmu_notifier_invalidate_page() Signed-off-by: Jérôme Glisse <jglisse@redhat.com> Tested-by: Mike Galbraith <efault@gmx.de> Tested-by: Adam Borowski <kilobyte@angband.pl> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: kvm@vger.kernel.org Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-08-26kvm/x86: Avoid clearing the C-bit in rsvd_bits()Brijesh Singh2-4/+28
The following commit: d0ec49d4de90 ("kvm/x86/svm: Support Secure Memory Encryption within KVM") uses __sme_clr() to remove the C-bit in rsvd_bits(). rsvd_bits() is just a simple function to return some 1 bits. Applying a mask based on properties of the host MMU is incorrect. Additionally, the masks computed by __reset_rsvds_bits_mask also apply to guest page tables, where the C bit is reserved since we don't emulate SME. The fix is to clear the C-bit from rsvd_bits_mask array after it has been populated from __reset_rsvds_bits_mask() Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Brijesh Singh <brijesh.singh@amd.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: kvm@vger.kernel.org Cc: paolo.bonzini@gmail.com Fixes: d0ec49d ("kvm/x86/svm: Support Secure Memory Encryption within KVM") Link: http://lkml.kernel.org/r/20170825205540.123531-1-brijesh.singh@amd.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-08-26Merge branch 'linus' into x86/mm to pick up fixes and to fix conflictsIngo Molnar6-119/+251
Conflicts: arch/x86/kernel/head64.c arch/x86/mm/mmap.c Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-08-25KVM, pkeys: do not use PKRU value in vcpu->arch.guest_fpu.statePaolo Bonzini1-3/+14
The host pkru is restored right after vcpu exit (commit 1be0e61), so KVM_GET_XSAVE will return the host PKRU value instead. Fix this by using the guest PKRU explicitly in fill_xsave and load_xsave. This part is based on a patch by Junkang Fu. The host PKRU data may also not match the value in vcpu->arch.guest_fpu.state, because it could have been changed by userspace since the last time it was saved, so skip loading it in kvm_load_guest_fpu. Reported-by: Junkang Fu <junkang.fjk@alibaba-inc.com> Cc: Yang Zhang <zy107165@alibaba-inc.com> Fixes: 1be0e61c1f255faaeab04a390e00c8b9b9042870 Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-08-25KVM: x86: simplify handling of PKRUPaolo Bonzini4-30/+9
Move it to struct kvm_arch_vcpu, replacing guest_pkru_valid with a simple comparison against the host value of the register. The write of PKRU in addition can be skipped if the guest has not enabled the feature. Once we do this, we need not test OSPKE in the host anymore, because guest_CR4.PKE=1 implies host_CR4.PKE=1. The static PKU test is kept to elide the code on older CPUs. Suggested-by: Yang Zhang <zy107165@alibaba-inc.com> Fixes: 1be0e61c1f255faaeab04a390e00c8b9b9042870 Cc: stable@vger.kernel.org Reviewed-by: David Hildenbrand <david@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-08-25KVM: x86: block guest protection keys unless the host has them enabledPaolo Bonzini1-1/+1
If the host has protection keys disabled, we cannot read and write the guest PKRU---RDPKRU and WRPKRU fail with #GP(0) if CR4.PKE=0. Block the PKU cpuid bit in that case. This ensures that guest_CR4.PKE=1 implies host_CR4.PKE=1. Fixes: 1be0e61c1f255faaeab04a390e00c8b9b9042870 Cc: stable@vger.kernel.org Reviewed-by: David Hildenbrand <david@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-08-24x86/lguest: Remove lguest supportJuergen Gross1-1/+0
Lguest seems to be rather unused these days. It has seen only patches ensuring it still builds the last two years and its official state is "Odd Fixes". Remove it in order to be able to clean up the paravirt code. Signed-off-by: Juergen Gross <jgross@suse.com> Acked-by: Rusty Russell <rusty@rustcorp.com.au> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: boris.ostrovsky@oracle.com Cc: lguest@lists.ozlabs.org Cc: rusty@rustcorp.com.au Cc: xen-devel@lists.xenproject.org Link: http://lkml.kernel.org/r/20170816173157.8633-3-jgross@suse.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-08-11x86/cpufeature, kvm/svm: Rename (shorten) the new "virtualized ↵Borislav Petkov1-1/+1
VMSAVE/VMLOAD" CPUID flag "virtual_vmload_vmsave" is what is going to land in /proc/cpuinfo now as per v4.13-rc4, for a single feature bit which is clearly too long. So rename it to what it is called in the processor manual. "v_vmsave_vmload" is a bit shorter, after all. We could go more aggressively here but having it the same as in the processor manual is advantageous. Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Radim Krčmář <rkrcmar@redhat.com> Cc: Janakarajan Natarajan <Janakarajan.Natarajan@amd.com> Cc: Jörg Rödel <joro@8bytes.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: kvm-ML <kvm@vger.kernel.org> Link: http://lkml.kernel.org/r/20170801185552.GA3743@nazgul.tnic Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-08-03KVM: nVMX: Fix interrupt window request with "Acknowledge interrupt on exit"Wanpeng Li1-2/+9
------------[ cut here ]------------ WARNING: CPU: 5 PID: 2288 at arch/x86/kvm/vmx.c:11124 nested_vmx_vmexit+0xd64/0xd70 [kvm_intel] CPU: 5 PID: 2288 Comm: qemu-system-x86 Not tainted 4.13.0-rc2+ #7 RIP: 0010:nested_vmx_vmexit+0xd64/0xd70 [kvm_intel] Call Trace: vmx_check_nested_events+0x131/0x1f0 [kvm_intel] ? vmx_check_nested_events+0x131/0x1f0 [kvm_intel] kvm_arch_vcpu_ioctl_run+0x5dd/0x1be0 [kvm] ? vmx_vcpu_load+0x1be/0x220 [kvm_intel] ? kvm_arch_vcpu_load+0x62/0x230 [kvm] kvm_vcpu_ioctl+0x340/0x700 [kvm] ? kvm_vcpu_ioctl+0x340/0x700 [kvm] ? __fget+0xfc/0x210 do_vfs_ioctl+0xa4/0x6a0 ? __fget+0x11d/0x210 SyS_ioctl+0x79/0x90 do_syscall_64+0x8f/0x750 ? trace_hardirqs_on_thunk+0x1a/0x1c entry_SYSCALL64_slow_path+0x25/0x25 This can be reproduced by booting L1 guest w/ 'noapic' grub parameter, which means that tells the kernel to not make use of any IOAPICs that may be present in the system. Actually external_intr variable in nested_vmx_vmexit() is the req_int_win variable passed from vcpu_enter_guest() which means that the L0's userspace requests an irq window. I observed the scenario (!kvm_cpu_has_interrupt(vcpu) && L0's userspace reqeusts an irq window) is true, so there is no interrupt which L1 requires to inject to L2, we should not attempt to emualte "Acknowledge interrupt on exit" for the irq window requirement in this scenario. This patch fixes it by not attempt to emulate "Acknowledge interrupt on exit" if there is no L1 requirement to inject an interrupt to L2. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com> [Added code comment to make it obvious that the behavior is not correct. We should do a userspace exit with open interrupt window instead of the nested VM exit. This patch still improves the behavior, so it was accepted as a (temporary) workaround.] Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2017-08-02KVM: nVMX: mark vmcs12 pages dirty on L2 exitDavid Matlack1-10/+43
The host physical addresses of L1's Virtual APIC Page and Posted Interrupt descriptor are loaded into the VMCS02. The CPU may write to these pages via their host physical address while L2 is running, bypassing address-translation-based dirty tracking (e.g. EPT write protection). Mark them dirty on every exit from L2 to prevent them from getting out of sync with dirty tracking. Also mark the virtual APIC page and the posted interrupt descriptor dirty when KVM is virtualizing posted interrupt processing. Signed-off-by: David Matlack <dmatlack@google.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2017-08-02kvm: nVMX: don't flush VMCS12 during VMXOFF or VCPU teardownDavid Matlack1-5/+11
According to the Intel SDM, software cannot rely on the current VMCS to be coherent after a VMXOFF or shutdown. So this is a valid way to handle VMCS12 flushes. 24.11.1 Software Use of Virtual-Machine Control Structures ... If a logical processor leaves VMX operation, any VMCSs active on that logical processor may be corrupted (see below). To prevent such corruption of a VMCS that may be used either after a return to VMX operation or on another logical processor, software should execute VMCLEAR for that VMCS before executing the VMXOFF instruction or removing power from the processor (e.g., as part of a transition to the S3 and S4 power states). ... This fixes a "suspicious rcu_dereference_check() usage!" warning during kvm_vm_release() because nested_release_vmcs12() calls kvm_vcpu_write_guest_page() without holding kvm->srcu. Signed-off-by: David Matlack <dmatlack@google.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2017-08-02KVM: nVMX: do not pin the VMCS12Paolo Bonzini1-17/+7
Since the current implementation of VMCS12 does a memcpy in and out of guest memory, we do not need current_vmcs12 and current_vmcs12_page anymore. current_vmptr is enough to read and write the VMCS12. And David Matlack noted: This patch also fixes dirty tracking (memslot->dirty_bitmap) of the VMCS12 page by using kvm_write_guest. nested_release_page() only marks the struct page dirty. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: David Hildenbrand <david@redhat.com> [Added David Matlack's note and nested_release_page_clean() fix.] Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2017-08-02KVM: X86: init irq->level in kvm_pv_kick_cpu_opLongpeng(Mike)1-0/+1
'lapic_irq' is a local variable and its 'level' field isn't initialized, so 'level' is random, it doesn't matter but makes UBSAN unhappy: UBSAN: Undefined behaviour in .../lapic.c:... load of value 10 is not a valid value for type '_Bool' ... Call Trace: [<ffffffff81f030b6>] dump_stack+0x1e/0x20 [<ffffffff81f03173>] ubsan_epilogue+0x12/0x55 [<ffffffff81f03b96>] __ubsan_handle_load_invalid_value+0x118/0x162 [<ffffffffa1575173>] kvm_apic_set_irq+0xc3/0xf0 [kvm] [<ffffffffa1575b20>] kvm_irq_delivery_to_apic_fast+0x450/0x910 [kvm] [<ffffffffa15858ea>] kvm_irq_delivery_to_apic+0xfa/0x7a0 [kvm] [<ffffffffa1517f4e>] kvm_emulate_hypercall+0x62e/0x760 [kvm] [<ffffffffa113141a>] handle_vmcall+0x1a/0x30 [kvm_intel] [<ffffffffa114e592>] vmx_handle_exit+0x7a2/0x1fa0 [kvm_intel] ... Signed-off-by: Longpeng(Mike) <longpeng2@huawei.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2017-08-02KVM: X86: Fix loss of pending INIT due to raceWanpeng Li1-8/+11
When SMP VM start, AP may lost INIT because of receiving INIT between kvm_vcpu_ioctl_x86_get/set_vcpu_events. vcpu 0 vcpu 1 kvm_vcpu_ioctl_x86_get_vcpu_events events->smi.latched_init = 0 send INIT to vcpu1 set vcpu1's pending_events kvm_vcpu_ioctl_x86_set_vcpu_events if (events->smi.latched_init == 0) clear INIT in pending_events This patch fixes it by just update SMM related flags if we are in SMM. Thanks Peng Hao for the report and original commit message. Reported-by: Peng Hao <peng.hao2@zte.com.cn> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2017-08-01KVM: nVMX: fixes to nested virt interrupt injectionPaolo Bonzini2-25/+72
There are three issues in nested_vmx_check_exception: 1) it is not taking PFEC_MATCH/PFEC_MASK into account, as reported by Wanpeng Li; 2) it should rebuild the interruption info and exit qualification fields from scratch, as reported by Jim Mattson, because the values from the L2->L0 vmexit may be invalid (e.g. if an emulated instruction causes a page fault, the EPT misconfig's exit qualification is incorrect). 3) CR2 and DR6 should not be written for exception intercept vmexits (CR2 only for AMD). This patch fixes the first two and adds a comment about the last, outlining the fix. Cc: Jim Mattson <jmattson@google.com> Cc: Wanpeng Li <wanpeng.li@hotmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-08-01KVM: nVMX: do not fill vm_exit_intr_error_code in prepare_vmcs12Paolo Bonzini1-18/+34
Do this in the caller of nested_vmx_vmexit instead. nested_vmx_check_exception was doing a vmwrite to the vmcs02's VM_EXIT_INTR_ERROR_CODE field, so that prepare_vmcs12 would move the field to vmcs12->vm_exit_intr_error_code. However that isn't possible on pre-Haswell machines. Moving the vmcs12 write to the callers fixes it. Reported-by: Jim Mattson <jmattson@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> [Changed nested_vmx_reflect_vmexit() return type to (int)1 from (bool)1, thanks to fengguang.wu@intel.com] Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2017-07-26KVM: LAPIC: Fix reentrancy issues with preempt notifiersWanpeng Li1-3/+14
Preempt can occur in the preemption timer expiration handler: CPU0 CPU1 preemption timer vmexit handle_preemption_timer(vCPU0) kvm_lapic_expired_hv_timer hv_timer_is_use == true sched_out sched_in kvm_arch_vcpu_load kvm_lapic_restart_hv_timer restart_apic_timer start_hv_timer already-expired timer or sw timer triggerd in the window start_sw_timer cancel_hv_timer /* back in kvm_lapic_expired_hv_timer */ cancel_hv_timer WARN_ON(!apic->lapic_timer.hv_timer_in_use); ==> Oops This can be reproduced if CONFIG_PREEMPT is enabled. ------------[ cut here ]------------ WARNING: CPU: 4 PID: 2972 at /home/kernel/linux/arch/x86/kvm//lapic.c:1563 kvm_lapic_expired_hv_timer+0x9e/0xb0 [kvm] CPU: 4 PID: 2972 Comm: qemu-system-x86 Tainted: G OE 4.13.0-rc2+ #16 RIP: 0010:kvm_lapic_expired_hv_timer+0x9e/0xb0 [kvm] Call Trace: handle_preemption_timer+0xe/0x20 [kvm_intel] vmx_handle_exit+0xb8/0xd70 [kvm_intel] kvm_arch_vcpu_ioctl_run+0xdd1/0x1be0 [kvm] ? kvm_arch_vcpu_load+0x47/0x230 [kvm] ? kvm_arch_vcpu_load+0x62/0x230 [kvm] kvm_vcpu_ioctl+0x340/0x700 [kvm] ? kvm_vcpu_ioctl+0x340/0x700 [kvm] ? __fget+0xfc/0x210 do_vfs_ioctl+0xa4/0x6a0 ? __fget+0x11d/0x210 SyS_ioctl+0x79/0x90 do_syscall_64+0x81/0x220 entry_SYSCALL64_slow_path+0x25/0x25 ------------[ cut here ]------------ WARNING: CPU: 4 PID: 2972 at /home/kernel/linux/arch/x86/kvm//lapic.c:1498 cancel_hv_timer.isra.40+0x4f/0x60 [kvm] CPU: 4 PID: 2972 Comm: qemu-system-x86 Tainted: G W OE 4.13.0-rc2+ #16 RIP: 0010:cancel_hv_timer.isra.40+0x4f/0x60 [kvm] Call Trace: kvm_lapic_expired_hv_timer+0x3e/0xb0 [kvm] handle_preemption_timer+0xe/0x20 [kvm_intel] vmx_handle_exit+0xb8/0xd70 [kvm_intel] kvm_arch_vcpu_ioctl_run+0xdd1/0x1be0 [kvm] ? kvm_arch_vcpu_load+0x47/0x230 [kvm] ? kvm_arch_vcpu_load+0x62/0x230 [kvm] kvm_vcpu_ioctl+0x340/0x700 [kvm] ? kvm_vcpu_ioctl+0x340/0x700 [kvm] ? __fget+0xfc/0x210 do_vfs_ioctl+0xa4/0x6a0 ? __fget+0x11d/0x210 SyS_ioctl+0x79/0x90 do_syscall_64+0x81/0x220 entry_SYSCALL64_slow_path+0x25/0x25 This patch fixes it by making the caller of cancel_hv_timer, start_hv_timer and start_sw_timer be in preemption-disabled regions, which trivially avoid any reentrancy issue with preempt notifier. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com> [Add more WARNs. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-07-26KVM: nVMX: Fix loss of L2's NMI blocking stateWanpeng Li1-0/+2
Run kvm-unit-tests/eventinj.flat in L1 w/ ept=0 on both L0 and L1: Before NMI IRET test Sending NMI to self NMI isr running stack 0x461000 Sending nested NMI to self After nested NMI to self Nested NMI isr running rip=40038e After iret After NMI to self FAIL: NMI Commit 4c4a6f790ee862 (KVM: nVMX: track NMI blocking state separately for each VMCS) tracks NMI blocking state separately for vmcs01 and vmcs02. However it is not enough: - The L2 (kvm-unit-tests/eventinj.flat) generates NMI that will fault on IRET, so the L2 can generate #PF which can be intercepted by L0. - L0 walks L1's guest page table and sees the mapping is invalid, it resumes the L1 guest and injects the #PF into L1. At this point the vmcs02 has nmi_known_unmasked=true. - L1 sets set bit 3 (blocking by NMI) in the interruptibility-state field of vmcs12 (and fixes the shadow page table) before resuming L2 guest. - L1 executes VMRESUME to resume L2, causing a vmexit to L0 - during VMRESUME emulation, prepare_vmcs02 sets bit 3 in the interruptibility-state field of vmcs02, but nmi_known_unmasked is still true. - L2 immediately exits to L0 with another page fault, because L0 still has not updated the NGVA->HPA page tables. However, nmi_known_unmasked is true so vmx_recover_nmi_blocking does not do anything. The fix is to update nmi_known_unmasked when preparing vmcs02 from vmcs12. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-07-26KVM: nVMX: Fix posted intr delivery when vcpu is in guest modeWincy Van1-11/+11
The PI vector for L0 and L1 must be different. If dest vcpu0 is in guest mode while vcpu1 is delivering a non-nested PI to vcpu0, there wont't be any vmexit so that the non-nested interrupt will be delayed. Signed-off-by: Wincy Van <fanwenyi0529@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-07-26KVM: x86: do mask out upper bits of PAE CR3Paolo Bonzini1-2/+2
This reverts the change of commit f85c758dbee54cc3612a6e873ef7cecdb66ebee5, as the behavior it modified was intended. The VM is running in 32-bit PAE mode, and Table 4-7 of the Intel manual says: Table 4-7. Use of CR3 with PAE Paging Bit Position(s) Contents 4:0 Ignored 31:5 Physical address of the 32-Byte aligned page-directory-pointer table used for linear-address translation 63:32 Ignored (these bits exist only on processors supporting the Intel-64 architecture) To placate the static checker, write the mask explicitly as an unsigned long constant instead of using a 32-bit unsigned constant. Cc: Dan Carpenter <dan.carpenter@oracle.com> Fixes: f85c758dbee54cc3612a6e873ef7cecdb66ebee5 Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-07-24KVM: VMX: remove unused fieldPaolo Bonzini1-1/+0
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-07-20kvm: x86: hyperv: avoid livelock in oneshot SynIC timersRoman Kagan1-3/+4
If the SynIC timer message delivery fails due to SINT message slot being busy, there's no point to attempt starting the timer again until we're notified of the slot being released by the guest (via EOM or EOI). Even worse, when a oneshot timer fails to deliver its message, its re-arming with an expiration time in the past leads to immediate retry of the delivery, and so on, without ever letting the guest vcpu to run and release the slot, which results in a livelock. To avoid that, only start the timer when there's no timer message pending delivery. When there is, meaning the slot is busy, the processing will be restarted upon notification from the guest that the slot is released. Signed-off-by: Roman Kagan <rkagan@virtuozzo.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2017-07-20KVM: VMX: Fix invalid guest state detection after task-switch emulationWanpeng Li1-5/+10
This can be reproduced by EPT=1, unrestricted_guest=N, emulate_invalid_state=Y or EPT=0, the trace of kvm-unit-tests/taskswitch2.flat is like below, it tries to emulate invalid guest state task-switch: kvm_exit: reason TASK_SWITCH rip 0x0 info 40000058 0 kvm_emulate_insn: 42000:0:0f 0b (0x2) kvm_emulate_insn: 42000:0:0f 0b (0x2) failed kvm_inj_exception: #UD (0x0) kvm_entry: vcpu 0 kvm_exit: reason TASK_SWITCH rip 0x0 info 40000058 0 kvm_emulate_insn: 42000:0:0f 0b (0x2) kvm_emulate_insn: 42000:0:0f 0b (0x2) failed kvm_inj_exception: #UD (0x0) ...................... It appears that the task-switch emulation updates rflags (and vm86 flag) only after the segments are loaded, causing vmx->emulation_required to be set, when in fact invalid guest state emulation is not needed. This patch fixes it by updating vmx->emulation_required after the rflags (and vm86 flag) is updated in task-switch emulation. Thanks Radim for moving the update to vmx__set_flags and adding Paolo's suggestion for the check. Suggested-by: Nadav Amit <nadav.amit@gmail.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Nadav Amit <nadav.amit@gmail.com> Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2017-07-19x86: add MULTIUSER dependency for KVMArnd Bergmann1-1/+1
KVM tries to select 'TASKSTATS', which had additional dependencies: warning: (KVM) selects TASKSTATS which has unmet direct dependencies (NET && MULTIUSER) Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2017-07-19KVM: nVMX: Disallow VM-entry in MOV-SS shadowJim Mattson1-0/+7
Immediately following MOV-to-SS/POP-to-SS, VM-entry is disallowed. This check comes after the check for a valid VMCS. When this check fails, the instruction pointer should fall through to the next instruction, the ALU flags should be set to indicate VMfailValid, and the VM-instruction error should be set to 26 ("VM entry with events blocked by MOV SS"). Signed-off-by: Jim Mattson <jmattson@google.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2017-07-19KVM: nVMX: track NMI blocking state separately for each VMCSPaolo Bonzini1-10/+14
vmx_recover_nmi_blocking is using a cached value of the guest interruptibility info, which is stored in vmx->nmi_known_unmasked. vmx_recover_nmi_blocking is run for both normal and nested guests, so the cached value must be per-VMCS. This fixes eventinj.flat in a nested non-EPT environment. With EPT it works, because the EPT violation handler doesn't have the vmx->nmi_known_unmasked optimization (it is unnecessary because, unlike vmx_recover_nmi_blocking, it can just look at the exit qualification). Thanks to Wanpeng Li for debugging the testcase and providing an initial patch. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2017-07-19KVM: x86: masking out upper bitsDan Carpenter1-2/+2
kvm_read_cr3() returns an unsigned long and gfn is a u64. We intended to mask out the bottom 5 bits but because of the type issue we mask the top 32 bits as well. I don't know if this is a real problem, but it causes static checker warnings. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2017-07-18kvm/x86/svm: Support Secure Memory Encryption within KVMTom Lendacky5-24/+29
Update the KVM support to work with SME. The VMCB has a number of fields where physical addresses are used and these addresses must contain the memory encryption mask in order to properly access the encrypted memory. Also, use the memory encryption mask when creating and using the nested page tables. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Borislav Petkov <bp@suse.de> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brijesh Singh <brijesh.singh@amd.com> Cc: Dave Young <dyoung@redhat.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Larry Woodman <lwoodman@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matt Fleming <matt@codeblueprint.co.uk> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Toshimitsu Kani <toshi.kani@hpe.com> Cc: kasan-dev@googlegroups.com Cc: kvm@vger.kernel.org Cc: linux-arch@vger.kernel.org Cc: linux-doc@vger.kernel.org Cc: linux-efi@vger.kernel.org Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/89146eccfa50334409801ff20acd52a90fb5efcf.1500319216.git.thomas.lendacky@amd.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-07-14kvm: x86: hyperv: make VP_INDEX managed by userspaceRoman Kagan3-19/+39
Hyper-V identifies vCPUs by Virtual Processor Index, which can be queried via HV_X64_MSR_VP_INDEX msr. It is defined by the spec as a sequential number which can't exceed the maximum number of vCPUs per VM. APIC ids can be sparse and thus aren't a valid replacement for VP indices. Current KVM uses its internal vcpu index as VP_INDEX. However, to make it predictable and persistent across VM migrations, the userspace has to control the value of VP_INDEX. This patch achieves that, by storing vp_index explicitly on vcpu, and allowing HV_X64_MSR_VP_INDEX to be set from the host side. For compatibility it's initialized to KVM vcpu index. Also a few variables are renamed to make clear distinction betweed this Hyper-V vp_index and KVM vcpu_id (== APIC id). Besides, a new capability, KVM_CAP_HYPERV_VP_INDEX, is added to allow the userspace to skip attempting msr writes where unsupported, to avoid spamming error logs. Signed-off-by: Roman Kagan <rkagan@virtuozzo.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2017-07-14KVM: async_pf: Let guest support delivery of async_pf from guest modeWanpeng Li3-4/+5
Adds another flag bit (bit 2) to MSR_KVM_ASYNC_PF_EN. If bit 2 is 1, async page faults are delivered to L1 as #PF vmexits; if bit 2 is 0, kvm_can_do_async_pf returns 0 if in guest mode. This is similar to what svm.c wanted to do all along, but it is only enabled for Linux as L1 hypervisor. Foreign hypervisors must never receive async page faults as vmexits, because they'd probably be very confused about that. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2017-07-14KVM: async_pf: Force a nested vmexit if the injected #PF is async_pfWanpeng Li3-10/+32
Add an nested_apf field to vcpu->arch.exception to identify an async page fault, and constructs the expected vm-exit information fields. Force a nested VM exit from nested_vmx_check_exception() if the injected #PF is async page fault. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2017-07-14KVM: async_pf: Add L1 guest async_pf #PF vmexit handlerWanpeng Li4-37/+50
This patch adds the L1 guest async page fault #PF vmexit handler, such by L1 similar to ordinary async page fault. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com> [Passed insn parameters to kvm_mmu_page_fault().] Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2017-07-14KVM: x86: Simplify kvm_x86_ops->queue_exception parameter listWanpeng Li3-10/+11
This patch removes all arguments except the first in kvm_x86_ops->queue_exception since they can extract the arguments from vcpu->arch.exception themselves. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2017-07-13kvm: x86: hyperv: add KVM_CAP_HYPERV_SYNIC2Roman Kagan3-6/+16
There is a flaw in the Hyper-V SynIC implementation in KVM: when message page or event flags page is enabled by setting the corresponding msr, KVM zeroes it out. This is problematic because on migration the corresponding MSRs are loaded on the destination, so the content of those pages is lost. This went unnoticed so far because the only user of those pages was in-KVM hyperv synic timers, which could continue working despite that zeroing. Newer QEMU uses those pages for Hyper-V VMBus implementation, and zeroing them breaks the migration. Besides, in newer QEMU the content of those pages is fully managed by QEMU, so zeroing them is undesirable even when writing the MSRs from the guest side. To support this new scheme, introduce a new capability, KVM_CAP_HYPERV_SYNIC2, which, when enabled, makes sure that the synic pages aren't zeroed out in KVM. Signed-off-by: Roman Kagan <rkagan@virtuozzo.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2017-07-13KVM: x86: make backwards_tsc_observed a per-VM variableLadi Prosek1-4/+2
The backwards_tsc_observed global introduced in commit 16a9602 is never reset to false. If a VM happens to be running while the host is suspended (a common source of the TSC jumping backwards), master clock will never be enabled again for any VM. In contrast, if no VM is running while the host is suspended, master clock is unaffected. This is inconsistent and unnecessarily strict. Let's track the backwards_tsc_observed variable separately and let each VM start with a clean slate. Real world impact: My Windows VMs get slower after my laptop undergoes a suspend/resume cycle. The only way to get the perf back is unloading and reloading the kvm module. Signed-off-by: Ladi Prosek <lprosek@redhat.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2017-07-12KVM: SVM: Enable Virtual VMLOAD VMSAVE featureJanakarajan Natarajan1-0/+24
Enable the Virtual VMLOAD VMSAVE feature. This is done by setting bit 1 at position B8h in the vmcb. The processor must have nested paging enabled, be in 64-bit mode and have support for the Virtual VMLOAD VMSAVE feature for the bit to be set in the vmcb. Signed-off-by: Janakarajan Natarajan <Janakarajan.Natarajan@amd.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2017-07-12KVM: SVM: Rename lbr_ctl field in the vmcb control areaJanakarajan Natarajan1-5/+5
Rename the lbr_ctl variable to better reflect the purpose of the field - provide support for virtualization extensions. Signed-off-by: Janakarajan Natarajan <Janakarajan.Natarajan@amd.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2017-07-12KVM: SVM: Prepare for new bit definition in lbr_ctlJanakarajan Natarajan1-2/+2
The lbr_ctl variable in the vmcb control area is used to enable or disable Last Branch Record (LBR) virtualization. However, this is to be done using only bit 0 of the variable. To correct this and to prepare for a new feature, change the current usage to work only on a particular bit. Signed-off-by: Janakarajan Natarajan <Janakarajan.Natarajan@amd.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2017-07-12KVM: SVM: handle singlestep exception when skipping emulated instructionsLadi Prosek1-26/+33
kvm_skip_emulated_instruction handles the singlestep debug exception which is something we almost always want. This commit (specifically the change in rdmsr_interception) makes the debug.flat KVM unit test pass on AMD. Two call sites still call skip_emulated_instruction directly: * In svm_queue_exception where it's used only for moving the rip forward * In task_switch_interception which is analogous to handle_task_switch in VMX Signed-off-by: Ladi Prosek <lprosek@redhat.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2017-07-12KVM: x86: take slots_lock in kvm_free_pitRadim Krčmář1-0/+2
kvm_vm_release() did not have slots_lock when calling kvm_io_bus_unregister_dev() and this went unnoticed until 4a12f9517728 ("KVM: mark kvm->busses as rcu protected") added dynamic checks. Luckily, there should be no race at that point: ============================= WARNING: suspicious RCU usage 4.12.0.kvm+ #0 Not tainted ----------------------------- ./include/linux/kvm_host.h:479 suspicious rcu_dereference_check() usage! lockdep_rcu_suspicious+0xc5/0x100 kvm_io_bus_unregister_dev+0x173/0x190 [kvm] kvm_free_pit+0x28/0x80 [kvm] kvm_arch_sync_events+0x2d/0x30 [kvm] kvm_put_kvm+0xa7/0x2a0 [kvm] kvm_vm_release+0x21/0x30 [kvm] Reviewed-by: David Hildenbrand <david@redhat.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2017-07-12kvm: vmx: Properly handle machine check during VM-entryJim Mattson1-6/+9
vmx_complete_atomic_exit should call kvm_machine_check for any VM-entry failure due to a machine-check event. Such an exit should be recognized solely by its basic exit reason (i.e. the low 16 bits of the VMCS exit reason field). None of the other VMCS exit information fields contain valid information when the VM-exit is due to "VM-entry failure due to machine-check event". Signed-off-by: Jim Mattson <jmattson@google.com> Reviewed-by: Xiao Guangrong <xiaoguangrong@tencent.com> [Changed VM_EXIT_INTR_INFO condition to better describe its reason.] Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2017-07-12KVM: x86: update master clock before computing kvmclock_offsetRadim Krčmář1-1/+7
kvm master clock usually has a different frequency than the kernel boot clock. This is not a problem until the master clock is updated; update uses the current kernel boot clock to compute new kvm clock, which erases any kvm clock cycles that might have built up due to frequency difference over a long period. KVM_SET_CLOCK is one of places where we can safely update master clock as the guest-visible clock is going to be shifted anyway. The problem with current code is that it updates the kvm master clock after updating the offset. If the master clock was enabled before calling KVM_SET_CLOCK, then it might have built up a significant delta from kernel boot clock. In the worst case, the time set by userspace would be shifted by so much that it couldn't have been set at any point during KVM_SET_CLOCK. To fix this, move kvm_gen_update_masterclock() before computing kvmclock_offset, which means that the master clock and kernel boot clock will be sufficiently close together. Another solution would be to replace get_kvmclock_ns() with "ktime_get_boot_ns() + ka->kvmclock_offset", which is marginally more accurate, but would break symmetry with KVM_GET_CLOCK. Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2017-07-12kvm: nVMX: Shadow "high" parts of shadowed 64-bit VMCS fieldsJim Mattson1-26/+34
Inconsistencies result from shadowing only accesses to the full 64-bits of a 64-bit VMCS field, but not shadowing accesses to the high 32-bits of the field. The "high" part of a 64-bit field should be shadowed whenever the full 64-bit field is shadowed. Signed-off-by: Jim Mattson <jmattson@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-07-12kvm: nVMX: Fix nested_vmx_check_msr_bitmap_controlsJim Mattson1-11/+6
Allow the L1 guest to specify the last page of addressable guest physical memory for an L2 MSR permission bitmap. Also remove the vmcs12_read_any() check that should never fail. Fixes: 3af18d9c5fe95 ("KVM: nVMX: Prepare for using hardware MSR bitmap") Signed-off-by: Jim Mattson <jmattson@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-07-12kvm: nVMX: Validate the I/O bitmaps on nested VM-entryJim Mattson1-0/+16
According to the SDM, if the "use I/O bitmaps" VM-execution control is 1, bits 11:0 of each I/O-bitmap address must be 0. Neither address should set any bits beyond the processor's physical-address width. Signed-off-by: Jim Mattson <jmattson@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-07-12kvm: nVMX: Don't set vmcs12 to "launched" when VMLAUNCH failsJim Mattson1-2/+2
The VMCS launch state is not set to "launched" unless the VMLAUNCH actually succeeds. VMLAUNCH failure includes VM-exits with bit 31 set. Note that this change does not address the general problem that a failure to launch/resume vmcs02 (i.e. vmx->fail) is not handled correctly. Signed-off-by: Jim Mattson <jmattson@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-07-10KVM: vmx: expose more information for KVM_INTERNAL_ERROR_DELIVERY_EV exitsPaolo Bonzini1-1/+7
This exit ended up being reported, but the currently exposed data does not provide much of a starting point for debugging. In the reported case, the vmexit was an EPT misconfiguration (MMIO access). Let userspace report ethe exit qualification and, if relevant, the GPA. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-07-07Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds10-208/+357
Pull KVM updates from Paolo Bonzini: "PPC: - Better machine check handling for HV KVM - Ability to support guests with threads=2, 4 or 8 on POWER9 - Fix for a race that could cause delayed recognition of signals - Fix for a bug where POWER9 guests could sleep with interrupts pending. ARM: - VCPU request overhaul - allow timer and PMU to have their interrupt number selected from userspace - workaround for Cavium erratum 30115 - handling of memory poisonning - the usual crop of fixes and cleanups s390: - initial machine check forwarding - migration support for the CMMA page hinting information - cleanups and fixes x86: - nested VMX bugfixes and improvements - more reliable NMI window detection on AMD - APIC timer optimizations Generic: - VCPU request overhaul + documentation of common code patterns - kvm_stat improvements" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (124 commits) Update my email address kvm: vmx: allow host to access guest MSR_IA32_BNDCFGS x86: kvm: mmu: use ept a/d in vmcs02 iff used in vmcs12 kvm: x86: mmu: allow A/D bits to be disabled in an mmu x86: kvm: mmu: make spte mmio mask more explicit x86: kvm: mmu: dead code thanks to access tracking KVM: PPC: Book3S: Fix typo in XICS-on-XIVE state saving code KVM: PPC: Book3S HV: Close race with testing for signals on guest entry KVM: PPC: Book3S HV: Simplify dynamic micro-threading code KVM: x86: remove ignored type attribute KVM: LAPIC: Fix lapic timer injection delay KVM: lapic: reorganize restart_apic_timer KVM: lapic: reorganize start_hv_timer kvm: nVMX: Check memory operand to INVVPID KVM: s390: Inject machine check into the nested guest KVM: s390: Inject machine check into the guest tools/kvm_stat: add new interactive command 'b' tools/kvm_stat: add new command line switch '-i' tools/kvm_stat: fix error on interactive command 'g' KVM: SVM: suppress unnecessary NMI singlestep on GIF=0 and nested exit ...
generated by cgit v1.2.3 (git 2.39.0) at 2025-01-23 05:06:52 +0300