summaryrefslogtreecommitdiff
path: root/arch/x86/include/asm/irq.h
AgeCommit message (Collapse)AuthorFilesLines
2024-02-08x86: replace CONFIG_HAVE_KVM with IS_ENABLED(CONFIG_KVM)Paolo Bonzini1-1/+1
It is more accurate to check if KVM is enabled, instead of having the architecture say so. Architectures always "have" KVM, so for example checking CONFIG_HAVE_KVM in x86 code is pointless, but if KVM is disabled in a specific build, there is no need for support code. Alternatively, many of the #ifdefs could simply be deleted. However, this would add completely dead code. For example, when KVM is disabled, there should not be any posted interrupts, i.e. NOT wiring up the "dummy" handlers and treating IRQs on those vectors as spurious is the right thing to do. Cc: x86@kernel.org Cc: kbingham@kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2023-08-18nmi_backtrace: allow excluding an arbitrary CPUDouglas Anderson1-1/+1
The APIs that allow backtracing across CPUs have always had a way to exclude the current CPU. This convenience means callers didn't need to find a place to allocate a CPU mask just to handle the common case. Let's extend the API to take a CPU ID to exclude instead of just a boolean. This isn't any more complex for the API to handle and allows the hardlockup detector to exclude a different CPU (the one it already did a trace for) without needing to find space for a CPU mask. Arguably, this new API also encourages safer behavior. Specifically if the caller wants to avoid tracing the current CPU (maybe because they already traced the current CPU) this makes it more obvious to the caller that they need to make sure that the current CPU ID can't change. [akpm@linux-foundation.org: fix trigger_allbutcpu_cpu_backtrace() stub] Link: https://lkml.kernel.org/r/20230804065935.v4.1.Ia35521b91fc781368945161d7b28538f9996c182@changeid Signed-off-by: Douglas Anderson <dianders@chromium.org> Acked-by: Michal Hocko <mhocko@suse.com> Cc: kernel test robot <lkp@intel.com> Cc: Lecopzer Chen <lecopzer.chen@mediatek.com> Cc: Petr Mladek <pmladek@suse.com> Cc: Pingfan Liu <kernelfans@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-10init: consolidate prototypes in linux/init.hArnd Bergmann1-2/+0
The init/main.c file contains some extern declarations for functions defined in architecture code, and it defines some other functions that are called from architecture code with a custom prototype. Both of those result in warnings with 'make W=1': init/calibrate.c:261:37: error: no previous prototype for 'calibrate_delay_is_known' [-Werror=missing-prototypes] init/main.c:790:20: error: no previous prototype for 'mem_encrypt_init' [-Werror=missing-prototypes] init/main.c:792:20: error: no previous prototype for 'poking_init' [-Werror=missing-prototypes] arch/arm64/kernel/irq.c:122:13: error: no previous prototype for 'init_IRQ' [-Werror=missing-prototypes] arch/arm64/kernel/time.c:55:13: error: no previous prototype for 'time_init' [-Werror=missing-prototypes] arch/x86/kernel/process.c:935:13: error: no previous prototype for 'arch_post_acpi_subsys_init' [-Werror=missing-prototypes] init/calibrate.c:261:37: error: no previous prototype for 'calibrate_delay_is_known' [-Werror=missing-prototypes] kernel/fork.c:991:20: error: no previous prototype for 'arch_task_cache_init' [-Werror=missing-prototypes] Add prototypes for all of these in include/linux/init.h or another appropriate header, and remove the duplicate declarations from architecture specific code. [sfr@canb.auug.org.au: declare time_init_early()] Link: https://lkml.kernel.org/r/20230519124311.5167221c@canb.auug.org.au Link: https://lkml.kernel.org/r/20230517131102.934196-12-arnd@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Boqun Feng <boqun.feng@gmail.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christoph Lameter <cl@linux.com> Cc: Dennis Zhou <dennis@kernel.org> Cc: Eric Paris <eparis@redhat.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Moore <paul@paul-moore.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rafael J. Wysocki <rafael@kernel.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Tejun Heo <tj@kernel.org> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Waiman Long <longman@redhat.com> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2021-02-25Merge tag 'x86-entry-2021-02-24' of ↵Linus Torvalds1-2/+0
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 irq entry updates from Thomas Gleixner: "The irq stack switching was moved out of the ASM entry code in course of the entry code consolidation. It ended up being suboptimal in various ways. This reworks the X86 irq stack handling: - Make the stack switching inline so the stackpointer manipulation is not longer at an easy to find place. - Get rid of the unnecessary indirect call. - Avoid the double stack switching in interrupt return and reuse the interrupt stack for softirq handling. - A objtool fix for CONFIG_FRAME_POINTER=y builds where it got confused about the stack pointer manipulation" * tag 'x86-entry-2021-02-24' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: objtool: Fix stack-swizzle for FRAME_POINTER=y um: Enforce the usage of asm-generic/softirq_stack.h x86/softirq/64: Inline do_softirq_own_stack() softirq: Move do_softirq_own_stack() to generic asm header softirq: Move __ARCH_HAS_DO_SOFTIRQ to Kconfig x86: Select CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK x86/softirq: Remove indirection in do_softirq_own_stack() x86/entry: Use run_sysvec_on_irqstack_cond() for XEN upcall x86/entry: Convert device interrupts to inline stack switching x86/entry: Convert system vectors to irq stack macro x86/irq: Provide macro for inlining irq stack switching x86/apic: Split out spurious handling code x86/irq/64: Adjust the per CPU irq stack pointer by 8 x86/irq: Sanitize irq stack tracking x86/entry: Fix instrumentation annotation
2021-02-11softirq: Move __ARCH_HAS_DO_SOFTIRQ to KconfigThomas Gleixner1-2/+0
To prepare for inlining do_softirq_own_stack() replace __ARCH_HAS_DO_SOFTIRQ with a Kconfig switch and select it in the affected architectures. This allows in the next step to move the function prototype and the inline stub into a seperate asm-generic header file which is required to avoid include recursion. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20210210002513.181713427@linutronix.de
2021-01-12x86/entry: Remove now unused do_IRQ() declarationHao Lee1-2/+0
do_IRQ() has been replaced by common_interrupt() in fa5e5c409213 ("x86/entry: Use idtentry for interrupts") Remove its now unused declaration. Signed-off-by: Hao Lee <haolee.swjtu@gmail.com> Signed-off-by: Borislav Petkov <bp@suse.de> Link: https://lkml.kernel.org/r/20210103030834.GA15432@haolee.github.io
2020-06-11x86/entry: Unbreak __irqentry_text_start/end magicThomas Gleixner1-0/+7
The entry rework moved interrupt entry code from the irqentry to the noinstr section which made the irqentry section empty. This breaks boundary checks which rely on the __irqentry_text_start/end markers to find out whether a function in a stack trace is interrupt/exception entry code. This affects the function graph tracer and filter_irq_stacks(). As the IDT entry points are all sequentialy emitted this is rather simple to unbreak by injecting __irqentry_text_start/end as global labels. To make this work correctly: - Remove the IRQENTRY_TEXT section from the x86 linker script - Define __irqentry so it breaks the build if it's used - Adjust the entry mirroring in PTI - Remove the redundant kprobes and unwinder bound checks Reported-by: Qian Cai <cai@lca.pw> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2020-06-11x86/entry: Convert KVM vectors to IDTENTRY_SYSVEC*Thomas Gleixner1-3/+0
Convert KVM specific system vectors to IDTENTRY_SYSVEC*: The two empty stub handlers which only increment the stats counter do no need to run on the interrupt stack. Use IDTENTRY_SYSVEC_SIMPLE for them. The wakeup handler does more work and runs on the interrupt stack. None of these handlers need to save and restore the irq_regs pointer. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Andy Lutomirski <luto@kernel.org> Link: https://lore.kernel.org/r/20200521202119.555715519@linutronix.de
2020-06-11x86/entry: Convert APIC interrupts to IDTENTRY_SYSVECThomas Gleixner1-1/+0
Convert APIC interrupts to IDTENTRY_SYSVEC: - Implement the C entry point with DEFINE_IDTENTRY_SYSVEC - Emit the ASM stub with DECLARE_IDTENTRY_SYSVEC - Remove the ASM idtentries in 64-bit - Remove the BUILD_INTERRUPT entries in 32-bit - Remove the old prototypes No functional change. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org> Acked-by: Andy Lutomirski <luto@kernel.org> Link: https://lore.kernel.org/r/20200521202119.280728850@linutronix.de
2020-06-11x86/irq: Rework handle_irq() for 64-bitThomas Gleixner1-1/+1
To consolidate the interrupt entry/exit code vs. the other exceptions make handle_irq() an inline and handle both 64-bit and 32-bit mode. Preparatory change to move irq stack switching for 64-bit to C which allows to consolidate the entry exit handling by reusing the idtentry machinery both in ASM and C. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org> Acked-by: Andy Lutomirski <luto@kernel.org> Link: https://lore.kernel.org/r/20200521202118.889972748@linutronix.de
2020-06-11x86/irq: Convey vector as argument and not in ptregsThomas Gleixner1-1/+1
Device interrupts which go through do_IRQ() or the spurious interrupt handler have their separate entry code on 64 bit for no good reason. Both 32 and 64 bit transport the vector number through ORIG_[RE]AX in pt_regs. Further the vector number is forced to fit into an u8 and is complemented and offset by 0x80 so it's in the signed character range. Otherwise GAS would expand the pushq to a 5 byte instruction for any vector > 0x7F. Treat the vector number like an error code and hand it to the C function as argument. This allows to get rid of the extra entry code in a later step. Simplify the error code push magic by implementing the pushq imm8 via a '.byte 0x6a, vector' sequence so GAS is not able to screw it up. As the pushq imm8 is sign extending the resulting error code needs to be truncated to 8 bits in C code. Originally-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org> Acked-by: Andy Lutomirski <luto@kernel.org> Link: https://lore.kernel.org/r/20200521202118.796915981@linutronix.de
2020-02-27x86/irq: Remove useless return value from do_IRQ()Thomas Gleixner1-1/+1
Nothing is using it. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com> Reviewed-by: Andy Lutomirski <luto@kernel.org> Link: https://lkml.kernel.org/r/20200225220216.826870369@linutronix.de
2019-08-20x86/irq: Move IS_ERR_OR_NULL() check into common do_IRQ() codeHeiner Kallweit1-1/+1
Both the 64bit and the 32bit handle_irq() implementation check the irq descriptor pointer with IS_ERR_OR_NULL() and return failure. That can be done simpler in the common do_IRQ() code. This reduces the 64bit handle_irq() function to a wrapper around generic_handle_irq_desc(). Invoke it directly from do_IRQ() to spare the extra function call. [ tglx: Got rid of the #ifdef and massaged changelog ] Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/2ec758c7-9aaa-73ab-f083-cc44c86aa741@gmail.com
2019-04-17x86/irq/64: Init hardirq_stack_ptr during CPU hotplugThomas Gleixner1-4/+0
Preparatory change for disentangling the irq stack union as a prerequisite for irq stacks with guard pages. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: "Chang S. Bae" <chang.seok.bae@intel.com> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Nicolai Stange <nstange@suse.de> Cc: Pavel Tatashin <pasha.tatashin@oracle.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sean Christopherson <sean.j.christopherson@intel.com> Cc: x86-ml <x86@kernel.org> Cc: Yi Wang <wang.yi59@zte.com.cn> Link: https://lkml.kernel.org/r/20190414160146.177558566@linutronix.de
2019-04-17x86/irq/32: Handle irq stack allocation failure properThomas Gleixner1-2/+2
irq_ctx_init() crashes hard on page allocation failures. While that's ok during early boot, it's just wrong in the CPU hotplug bringup code. Check the page allocation failure and return -ENOMEM and handle it at the call sites. On early boot the only way out is to BUG(), but on CPU hotplug there is no reason to crash, so just abort the operation. Rename the function to something more sensible while at it. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Alison Schofield <alison.schofield@intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Nicolai Stange <nstange@suse.de> Cc: Pu Wen <puwen@hygon.cn> Cc: Sean Christopherson <sean.j.christopherson@intel.com> Cc: Shaokun Zhang <zhangshaokun@hisilicon.com> Cc: Stefano Stabellini <sstabellini@kernel.org> Cc: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Cc: x86-ml <x86@kernel.org> Cc: xen-devel@lists.xenproject.org Cc: Yazen Ghannam <yazen.ghannam@amd.com> Cc: Yi Wang <wang.yi59@zte.com.cn> Cc: Zhenzhong Duan <zhenzhong.duan@oracle.com> Link: https://lkml.kernel.org/r/20190414160146.089060584@linutronix.de
2018-11-23x86/headers: Fix -Wmissing-prototypes warningYi Wang1-0/+7
When building the kernel with W=1 we get a lot of -Wmissing-prototypes warnings, which are trivial in nature and easy to fix - and which may mask some real future bugs if the prototypes get out of sync with the function definition. This patch fixes most of -Wmissing-prototypes warnings which are in the root directory of arch/x86/kernel, not including the subdirectories. These are the warnings fixed in this patch: arch/x86/kernel/signal.c:865:17: warning: no previous prototype for ‘sys32_x32_rt_sigreturn’ [-Wmissing-prototypes] arch/x86/kernel/signal_compat.c:164:6: warning: no previous prototype for ‘sigaction_compat_abi’ [-Wmissing-prototypes] arch/x86/kernel/traps.c:625:46: warning: no previous prototype for ‘sync_regs’ [-Wmissing-prototypes] arch/x86/kernel/traps.c:640:24: warning: no previous prototype for ‘fixup_bad_iret’ [-Wmissing-prototypes] arch/x86/kernel/traps.c:929:13: warning: no previous prototype for ‘trap_init’ [-Wmissing-prototypes] arch/x86/kernel/irq.c:270:28: warning: no previous prototype for ‘smp_x86_platform_ipi’ [-Wmissing-prototypes] arch/x86/kernel/irq.c:301:16: warning: no previous prototype for ‘smp_kvm_posted_intr_ipi’ [-Wmissing-prototypes] arch/x86/kernel/irq.c:314:16: warning: no previous prototype for ‘smp_kvm_posted_intr_wakeup_ipi’ [-Wmissing-prototypes] arch/x86/kernel/irq.c:328:16: warning: no previous prototype for ‘smp_kvm_posted_intr_nested_ipi’ [-Wmissing-prototypes] arch/x86/kernel/irq_work.c:16:28: warning: no previous prototype for ‘smp_irq_work_interrupt’ [-Wmissing-prototypes] arch/x86/kernel/irqinit.c:79:13: warning: no previous prototype for ‘init_IRQ’ [-Wmissing-prototypes] arch/x86/kernel/quirks.c:672:13: warning: no previous prototype for ‘early_platform_quirks’ [-Wmissing-prototypes] arch/x86/kernel/tsc.c:1499:15: warning: no previous prototype for ‘calibrate_delay_is_known’ [-Wmissing-prototypes] arch/x86/kernel/process.c:653:13: warning: no previous prototype for ‘arch_post_acpi_subsys_init’ [-Wmissing-prototypes] arch/x86/kernel/process.c:717:15: warning: no previous prototype for ‘arch_randomize_brk’ [-Wmissing-prototypes] arch/x86/kernel/process.c:784:6: warning: no previous prototype for ‘do_arch_prctl_common’ [-Wmissing-prototypes] arch/x86/kernel/reboot.c:869:6: warning: no previous prototype for ‘nmi_panic_self_stop’ [-Wmissing-prototypes] arch/x86/kernel/smp.c:176:27: warning: no previous prototype for ‘smp_reboot_interrupt’ [-Wmissing-prototypes] arch/x86/kernel/smp.c:260:28: warning: no previous prototype for ‘smp_reschedule_interrupt’ [-Wmissing-prototypes] arch/x86/kernel/smp.c:281:28: warning: no previous prototype for ‘smp_call_function_interrupt’ [-Wmissing-prototypes] arch/x86/kernel/smp.c:291:28: warning: no previous prototype for ‘smp_call_function_single_interrupt’ [-Wmissing-prototypes] arch/x86/kernel/ftrace.c:840:6: warning: no previous prototype for ‘arch_ftrace_update_trampoline’ [-Wmissing-prototypes] arch/x86/kernel/ftrace.c:934:7: warning: no previous prototype for ‘arch_ftrace_trampoline_func’ [-Wmissing-prototypes] arch/x86/kernel/ftrace.c:946:6: warning: no previous prototype for ‘arch_ftrace_trampoline_free’ [-Wmissing-prototypes] arch/x86/kernel/crash.c:114:6: warning: no previous prototype for ‘crash_smp_send_stop’ [-Wmissing-prototypes] arch/x86/kernel/crash.c:351:5: warning: no previous prototype for ‘crash_setup_memmap_entries’ [-Wmissing-prototypes] arch/x86/kernel/crash.c:424:5: warning: no previous prototype for ‘crash_load_segments’ [-Wmissing-prototypes] arch/x86/kernel/machine_kexec_64.c:372:7: warning: no previous prototype for ‘arch_kexec_kernel_image_load’ [-Wmissing-prototypes] arch/x86/kernel/paravirt-spinlocks.c:12:16: warning: no previous prototype for ‘__native_queued_spin_unlock’ [-Wmissing-prototypes] arch/x86/kernel/paravirt-spinlocks.c:18:6: warning: no previous prototype for ‘pv_is_native_spin_unlock’ [-Wmissing-prototypes] arch/x86/kernel/paravirt-spinlocks.c:24:16: warning: no previous prototype for ‘__native_vcpu_is_preempted’ [-Wmissing-prototypes] arch/x86/kernel/paravirt-spinlocks.c:30:6: warning: no previous prototype for ‘pv_is_native_vcpu_is_preempted’ [-Wmissing-prototypes] arch/x86/kernel/kvm.c:258:1: warning: no previous prototype for ‘do_async_page_fault’ [-Wmissing-prototypes] arch/x86/kernel/jailhouse.c:200:6: warning: no previous prototype for ‘jailhouse_paravirt’ [-Wmissing-prototypes] arch/x86/kernel/check.c:91:13: warning: no previous prototype for ‘setup_bios_corruption_check’ [-Wmissing-prototypes] arch/x86/kernel/check.c:139:6: warning: no previous prototype for ‘check_for_bios_corruption’ [-Wmissing-prototypes] arch/x86/kernel/devicetree.c:32:13: warning: no previous prototype for ‘early_init_dt_scan_chosen_arch’ [-Wmissing-prototypes] arch/x86/kernel/devicetree.c:42:13: warning: no previous prototype for ‘add_dtb’ [-Wmissing-prototypes] arch/x86/kernel/devicetree.c:108:6: warning: no previous prototype for ‘x86_of_pci_init’ [-Wmissing-prototypes] arch/x86/kernel/devicetree.c:314:13: warning: no previous prototype for ‘x86_dtb_init’ [-Wmissing-prototypes] arch/x86/kernel/tracepoint.c:16:5: warning: no previous prototype for ‘trace_pagefault_reg’ [-Wmissing-prototypes] arch/x86/kernel/tracepoint.c:22:6: warning: no previous prototype for ‘trace_pagefault_unreg’ [-Wmissing-prototypes] arch/x86/kernel/head64.c:113:22: warning: no previous prototype for ‘__startup_64’ [-Wmissing-prototypes] arch/x86/kernel/head64.c:262:15: warning: no previous prototype for ‘__startup_secondary_64’ [-Wmissing-prototypes] arch/x86/kernel/head64.c:350:12: warning: no previous prototype for ‘early_make_pgtable’ [-Wmissing-prototypes] [ mingo: rewrote the changelog, fixed build errors. ] Signed-off-by: Yi Wang <wang.yi59@zte.com.cn> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: akataria@vmware.com Cc: akpm@linux-foundation.org Cc: andy.shevchenko@gmail.com Cc: anton@enomsg.org Cc: ard.biesheuvel@linaro.org Cc: bhe@redhat.com Cc: bhelgaas@google.com Cc: bp@alien8.de Cc: ccross@android.com Cc: devicetree@vger.kernel.org Cc: douly.fnst@cn.fujitsu.com Cc: dwmw@amazon.co.uk Cc: dyoung@redhat.com Cc: ebiederm@xmission.com Cc: frank.rowand@sony.com Cc: frowand.list@gmail.com Cc: ivan.gorinov@intel.com Cc: jailhouse-dev@googlegroups.com Cc: jan.kiszka@siemens.com Cc: jgross@suse.com Cc: jroedel@suse.de Cc: keescook@chromium.org Cc: kexec@lists.infradead.org Cc: konrad.wilk@oracle.com Cc: kvm@vger.kernel.org Cc: linux-efi@vger.kernel.org Cc: linux-pci@vger.kernel.org Cc: luto@kernel.org Cc: m.mizuma@jp.fujitsu.com Cc: namit@vmware.com Cc: oleg@redhat.com Cc: pasha.tatashin@oracle.com Cc: pbonzini@redhat.com Cc: prarit@redhat.com Cc: pravin.shedge4linux@gmail.com Cc: rajvi.jingar@intel.com Cc: rkrcmar@redhat.com Cc: robh+dt@kernel.org Cc: robh@kernel.org Cc: rostedt@goodmis.org Cc: takahiro.akashi@linaro.org Cc: thomas.lendacky@amd.com Cc: tony.luck@intel.com Cc: up2wing@gmail.com Cc: virtualization@lists.linux-foundation.org Cc: zhe.he@windriver.com Cc: zhong.weidong@zte.com.cn Link: http://lkml.kernel.org/r/1542852249-19820-1-git-send-email-wang.yi59@zte.com.cn Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-11-07Merge branch 'linus' into x86/apic, to resolve conflictsIngo Molnar1-0/+1
Conflicts: arch/x86/include/asm/x2apic.h Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman1-0/+1
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-25x86/irq: Simplify hotplug vector accountingThomas Gleixner1-4/+0
Before a CPU is taken offline the number of active interrupt vectors on the outgoing CPU and the number of vectors which are available on the other online CPUs are counted and compared. If the active vectors are more than the available vectors on the other CPUs then the CPU hot-unplug operation is aborted. This again uses loop based search and is inaccurate. The bitmap matrix allocator has accurate accounting information and can tell exactly whether the vector space is sufficient or not. Emit a message when the number of globaly reserved (unallocated) vectors is larger than the number of available vectors after offlining a CPU because after that point request_irq() might fail. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Juergen Gross <jgross@suse.com> Tested-by: Yu Chen <yu.c.chen@intel.com> Acked-by: Juergen Gross <jgross@suse.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Alok Kataria <akataria@vmware.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Rui Zhang <rui.zhang@intel.com> Cc: "K. Y. Srinivasan" <kys@microsoft.com> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Len Brown <lenb@kernel.org> Link: https://lkml.kernel.org/r/20170913213156.351193962@linutronix.de
2017-08-29x86/irq: Remove duplicated used_vectors definitionThomas Gleixner1-3/+0
Also remove the unparseable comment in the other place while at it. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/20170828064956.436711634@linutronix.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-08-29x86/irq: Remove vector_used_by_percpu_irq()Thomas Gleixner1-1/+0
Last user (lguest) is gone. Remove it. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/20170828064956.201432430@linutronix.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-06-22genirq/cpuhotplug: Add support for cleaning up move in progressThomas Gleixner1-1/+0
In order to move x86 to the generic hotplug migration code, add support for cleaning up move in progress bits. On architectures which have this x86 specific (mis)feature not enabled, this is optimized out by the compiler. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Jens Axboe <axboe@kernel.dk> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Keith Busch <keith.busch@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Christoph Hellwig <hch@lst.de> Link: http://lkml.kernel.org/r/20170619235445.525817311@linutronix.de
2016-10-08nmi_backtrace: add more trigger_*_cpu_backtrace() methodsChris Metcalf1-2/+3
Patch series "improvements to the nmi_backtrace code" v9. This patch series modifies the trigger_xxx_backtrace() NMI-based remote backtracing code to make it more flexible, and makes a few small improvements along the way. The motivation comes from the task isolation code, where there are scenarios where we want to be able to diagnose a case where some cpu is about to interrupt a task-isolated cpu. It can be helpful to see both where the interrupting cpu is, and also an approximation of where the cpu that is being interrupted is. The nmi_backtrace framework allows us to discover the stack of the interrupted cpu. I've tested that the change works as desired on tile, and build-tested x86, arm, mips, and sparc64. For x86 I confirmed that the generic cpuidle stuff as well as the architecture-specific routines are in the new cpuidle section. For arm, mips, and sparc I just build-tested it and made sure the generic cpuidle routines were in the new cpuidle section, but I didn't attempt to figure out which the platform-specific idle routines might be. That might be more usefully done by someone with platform experience in follow-up patches. This patch (of 4): Currently you can only request a backtrace of either all cpus, or all cpus but yourself. It can also be helpful to request a remote backtrace of a single cpu, and since we want that, the logical extension is to support a cpumask as the underlying primitive. This change modifies the existing lib/nmi_backtrace.c code to take a cpumask as its basic primitive, and modifies the linux/nmi.h code to use the new "cpumask" method instead. The existing clients of nmi_backtrace (arm and x86) are converted to using the new cpumask approach in this change. The other users of the backtracing API (sparc64 and mips) are converted to use the cpumask approach rather than the all/allbutself approach. The mips code ignored the "include_self" boolean but with this change it will now also dump a local backtrace if requested. Link: http://lkml.kernel.org/r/1472487169-14923-2-git-send-email-cmetcalf@mellanox.com Signed-off-by: Chris Metcalf <cmetcalf@mellanox.com> Tested-by: Daniel Thompson <daniel.thompson@linaro.org> [arm] Reviewed-by: Aaron Tomlin <atomlin@redhat.com> Reviewed-by: Petr Mladek <pmladek@suse.com> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Russell King <linux@arm.linux.org.uk> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: David Miller <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-15x86/irq: Call irq_force_move_complete with irq descriptorThomas Gleixner1-2/+3
First of all there is no point in looking up the irq descriptor again, but we also need the descriptor for the final cleanup race fix in the next patch. Make that change seperate. No functional difference. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Borislav Petkov <bp@alien8.de> Tested-by: Joe Lawrence <joe.lawrence@stratus.com> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Jeremiah Mahler <jmmahler@gmail.com> Cc: andy.shevchenko@gmail.com Cc: Guenter Roeck <linux@roeck-us.net> Cc: stable@vger.kernel.org #4.3+ Link: http://lkml.kernel.org/r/20151231160107.125211743@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-08-06x86/irq: Store irq descriptor in vector arrayThomas Gleixner1-1/+3
We can spare the irq_desc lookup in the interrupt entry code if we store the descriptor pointer in the vector array instead the interrupt number. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Bjorn Helgaas <bhelgaas@google.com> Link: http://lkml.kernel.org/r/20150802203609.717724106@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-05-19x86/irq: Define a global vector for VT-d Posted-InterruptsFeng Wu1-0/+4
Currently, we use a global vector as the Posted-Interrupts Notification Event for all the vCPUs in the system. We need to introduce another global vector for VT-d Posted-Interrtups, which will be used to wakeup the sleep vCPU when an external interrupt from a direct-assigned device happens for that vCPU. [ tglx: Removed a gazillion of extra newlines ] Signed-off-by: Feng Wu <feng.wu@intel.com> Cc: jiang.liu@linux.intel.com Link: http://lkml.kernel.org/r/1432026437-16560-4-git-send-email-feng.wu@intel.com Suggested-by: Yang Zhang <yang.z.zhang@intel.com> Acked-by: H. Peter Anvin <hpa@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-06-24nmi: provide the option to issue an NMI back trace to every cpu but currentAaron Tomlin1-1/+1
Sometimes it is preferred not to use the trigger_all_cpu_backtrace() routine when one wants to avoid capturing a back trace for current. For instance if one was previously captured recently. This patch provides a new routine namely trigger_allbutself_cpu_backtrace() which offers the flexibility to issue an NMI to every cpu but current and capture a back trace accordingly. Patch x86 and sparc to support new routine. [dzickus@redhat.com: add stub in #else clause] [dzickus@redhat.com: don't print message in single processor case, wrap with get/put_cpu based on Oleg's suggestion] [sfr@canb.auug.org.au: undo C99ism] Signed-off-by: Aaron Tomlin <atomlin@redhat.com> Signed-off-by: Don Zickus <dzickus@redhat.com> Acked-by: David S. Miller <davem@davemloft.net> Cc: Mateusz Guzik <mguzik@redhat.com> Cc: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-16x86: Add check for number of available vectors before CPU downPrarit Bhargava1-0/+1
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=64791 When a cpu is downed on a system, the irqs on the cpu are assigned to other cpus. It is possible, however, that when a cpu is downed there aren't enough free vectors on the remaining cpus to account for the vectors from the cpu that is being downed. This results in an interesting "overflow" condition where irqs are "assigned" to a CPU but are not handled. For example, when downing cpus on a 1-64 logical processor system: <snip> [ 232.021745] smpboot: CPU 61 is now offline [ 238.480275] smpboot: CPU 62 is now offline [ 245.991080] ------------[ cut here ]------------ [ 245.996270] WARNING: CPU: 0 PID: 0 at net/sched/sch_generic.c:264 dev_watchdog+0x246/0x250() [ 246.005688] NETDEV WATCHDOG: p786p1 (ixgbe): transmit queue 0 timed out [ 246.013070] Modules linked in: lockd sunrpc iTCO_wdt iTCO_vendor_support sb_edac ixgbe microcode e1000e pcspkr joydev edac_core lpc_ich ioatdma ptp mdio mfd_core i2c_i801 dca pps_core i2c_core wmi acpi_cpufreq isci libsas scsi_transport_sas [ 246.037633] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.12.0+ #14 [ 246.044451] Hardware name: Intel Corporation S4600LH ........../SVRBD-ROW_T, BIOS SE5C600.86B.01.08.0003.022620131521 02/26/2013 [ 246.057371] 0000000000000009 ffff88081fa03d40 ffffffff8164fbf6 ffff88081fa0ee48 [ 246.065728] ffff88081fa03d90 ffff88081fa03d80 ffffffff81054ecc ffff88081fa13040 [ 246.074073] 0000000000000000 ffff88200cce0000 0000000000000040 0000000000000000 [ 246.082430] Call Trace: [ 246.085174] <IRQ> [<ffffffff8164fbf6>] dump_stack+0x46/0x58 [ 246.091633] [<ffffffff81054ecc>] warn_slowpath_common+0x8c/0xc0 [ 246.098352] [<ffffffff81054fb6>] warn_slowpath_fmt+0x46/0x50 [ 246.104786] [<ffffffff815710d6>] dev_watchdog+0x246/0x250 [ 246.110923] [<ffffffff81570e90>] ? dev_deactivate_queue.constprop.31+0x80/0x80 [ 246.119097] [<ffffffff8106092a>] call_timer_fn+0x3a/0x110 [ 246.125224] [<ffffffff8106280f>] ? update_process_times+0x6f/0x80 [ 246.132137] [<ffffffff81570e90>] ? dev_deactivate_queue.constprop.31+0x80/0x80 [ 246.140308] [<ffffffff81061db0>] run_timer_softirq+0x1f0/0x2a0 [ 246.146933] [<ffffffff81059a80>] __do_softirq+0xe0/0x220 [ 246.152976] [<ffffffff8165fedc>] call_softirq+0x1c/0x30 [ 246.158920] [<ffffffff810045f5>] do_softirq+0x55/0x90 [ 246.164670] [<ffffffff81059d35>] irq_exit+0xa5/0xb0 [ 246.170227] [<ffffffff8166062a>] smp_apic_timer_interrupt+0x4a/0x60 [ 246.177324] [<ffffffff8165f40a>] apic_timer_interrupt+0x6a/0x70 [ 246.184041] <EOI> [<ffffffff81505a1b>] ? cpuidle_enter_state+0x5b/0xe0 [ 246.191559] [<ffffffff81505a17>] ? cpuidle_enter_state+0x57/0xe0 [ 246.198374] [<ffffffff81505b5d>] cpuidle_idle_call+0xbd/0x200 [ 246.204900] [<ffffffff8100b7ae>] arch_cpu_idle+0xe/0x30 [ 246.210846] [<ffffffff810a47b0>] cpu_startup_entry+0xd0/0x250 [ 246.217371] [<ffffffff81646b47>] rest_init+0x77/0x80 [ 246.223028] [<ffffffff81d09e8e>] start_kernel+0x3ee/0x3fb [ 246.229165] [<ffffffff81d0989f>] ? repair_env_string+0x5e/0x5e [ 246.235787] [<ffffffff81d095a5>] x86_64_start_reservations+0x2a/0x2c [ 246.242990] [<ffffffff81d0969f>] x86_64_start_kernel+0xf8/0xfc [ 246.249610] ---[ end trace fb74fdef54d79039 ]--- [ 246.254807] ixgbe 0000:c2:00.0 p786p1: initiating reset due to tx timeout [ 246.262489] ixgbe 0000:c2:00.0 p786p1: Reset adapter Last login: Mon Nov 11 08:35:14 from 10.18.17.119 [root@(none) ~]# [ 246.792676] ixgbe 0000:c2:00.0 p786p1: detected SFP+: 5 [ 249.231598] ixgbe 0000:c2:00.0 p786p1: NIC Link is Up 10 Gbps, Flow Control: RX/TX [ 246.792676] ixgbe 0000:c2:00.0 p786p1: detected SFP+: 5 [ 249.231598] ixgbe 0000:c2:00.0 p786p1: NIC Link is Up 10 Gbps, Flow Control: RX/TX (last lines keep repeating. ixgbe driver is dead until module reload.) If the downed cpu has more vectors than are free on the remaining cpus on the system, it is possible that some vectors are "orphaned" even though they are assigned to a cpu. In this case, since the ixgbe driver had a watchdog, the watchdog fired and notified that something was wrong. This patch adds a function, check_vectors(), to compare the number of vectors on the CPU going down and compares it to the number of vectors available on the system. If there aren't enough vectors for the CPU to go down, an error is returned and propogated back to userspace. v2: Do not need to look at percpu irqs v3: Need to check affinity to prevent counting of MSIs in IOAPIC Lowest Priority Mode v4: Additional changes suggested by Gong Chen. v5/v6/v7/v8: Updated comment text Signed-off-by: Prarit Bhargava <prarit@redhat.com> Link: http://lkml.kernel.org/r/1389613861-3853-1-git-send-email-prarit@redhat.com Reviewed-by: Gong Chen <gong.chen@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Michel Lespinasse <walken@google.com> Cc: Seiji Aguchi <seiji.aguchi@hds.com> Cc: Yang Zhang <yang.z.zhang@Intel.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Janet Morgan <janet.morgan@intel.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Ruiv Wang <ruiv.wang@gmail.com> Cc: Gong Chen <gong.chen@linux.intel.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Cc: <stable@vger.kernel.org>
2013-08-07x86, asmlinkage: Make all interrupt handlers asmlinkage / __visibleAndi Kleen1-1/+1
These handlers are all referenced from assembler stubs, so need to be visible. The handlers without arguments become asmlinkage, the others __visible to not force regparms(0) on x86-32. I put it all into a single patch, please let me know if you want it it split up. Signed-off-by: Andi Kleen <ak@linux.intel.com> Link: http://lkml.kernel.org/r/1375740170-7446-4-git-send-email-andi@firstfloor.org Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-06-20x86: Fix trigger_all_cpu_backtrace() implementationMichel Lespinasse1-0/+5
The following change fixes the x86 implementation of trigger_all_cpu_backtrace(), which was previously (accidentally, as far as I can tell) disabled to always return false as on architectures that do not implement this function. trigger_all_cpu_backtrace(), as defined in include/linux/nmi.h, should call arch_trigger_all_cpu_backtrace() if available, or return false if the underlying arch doesn't implement this function. x86 did provide a suitable arch_trigger_all_cpu_backtrace() implementation, but it wasn't actually being used because it was declared in asm/nmi.h, which linux/nmi.h doesn't include. Also, linux/nmi.h couldn't easily be fixed by including asm/nmi.h, because that file is not available on all architectures. I am proposing to fix this by moving the x86 definition of arch_trigger_all_cpu_backtrace() to asm/irq.h. Tested via: echo l > /proc/sysrq-trigger Before the change, this uses a fallback implementation which shows backtraces on active CPUs (using smp_call_function_interrupt() ) After the change, this shows NMI backtraces on all CPUs Signed-off-by: Michel Lespinasse <walken@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/1370518875-1346-1-git-send-email-walken@google.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2011-02-24x86: Add device tree supportSebastian Andrzej Siewior1-3/+0
This patch adds minimal support for device tree on x86. The device tree blob is passed to the kernel via setup_data which requires at least boot protocol 2.09. Memory size, restricted memory regions, boot arguments are gathered the traditional way so things like cmd_line are just here to let the code compile. The current plan is use the device tree as an extension and to gather information which can not be enumerated and would have to be hardcoded otherwise. This includes things like - which devices are on this I2C/SPI bus? - how are the interrupts wired to IO APIC? - where could my hpet be? Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Dirk Brandewie <dirk.brandewie@gmail.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Cc: sodaville@linutronix.de Cc: devicetree-discuss@lists.ozlabs.org LKML-Reference: <1298405266-1624-3-git-send-email-bigeasy@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-01-13Merge branch 'x86-olpc-for-linus' of ↵Linus Torvalds1-0/+3
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-olpc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, olpc: Speed up device tree creation during boot x86, olpc: Add OLPC device-tree support x86, of: Define irq functions to allow drivers/of/* to build on x86
2010-12-23x86, nmi_watchdog: Remove ARCH_HAS_NMI_WATCHDOG and rely on ↵Don Zickus1-4/+0
CONFIG_HARDLOCKUP_DETECTOR The x86 arch has shifted its use of the nmi_watchdog from a local implementation to the global one provide by kernel/watchdog.c. This shift has caused a whole bunch of compile problems under different config options. I attempt to simplify things with the patch below. In order to simplify things, I had to come to terms with the meaning of two terms ARCH_HAS_NMI_WATCHDOG and CONFIG_HARDLOCKUP_DETECTOR. Basically they mean the same thing, the former on a local level and the latter on a global level. With the old x86 nmi watchdog gone, there is no need to rely on defining the ARCH_HAS_NMI_WATCHDOG variable because it doesn't make sense any more. x86 will now use the global implementation. The changes below do a few things. First it changes the few places that relied on ARCH_HAS_NMI_WATCHDOG to use CONFIG_X86_LOCAL_APIC (the former was an alias for the latter anyway, so nothing unusual here). Those pieces of code were relying more on local apic functionality the nmi watchdog functionality, so the change should make sense. Second, I removed the x86 implementation of touch_nmi_watchdog(). It isn't need now, instead x86 will rely on kernel/watchdog.c's implementation. Third, I removed the #define ARCH_HAS_NMI_WATCHDOG itself from x86. And tweaked the include/linux/nmi.h file to tell users to look for an externally defined touch_nmi_watchdog in the case of ARCH_HAS_NMI_WATCHDOG _or_ CONFIG_HARDLOCKUP_DETECTOR. This changes removes some of the ugliness in that file. Finally, I added a Kconfig dependency for CONFIG_HARDLOCKUP_DETECTOR that said you can't have ARCH_HAS_NMI_WATCHDOG _and_ CONFIG_HARDLOCKUP_DETECTOR. You can only have one nmi_watchdog. Tested with ARCH=i386: allnoconfig, defconfig, allyesconfig, (various broken configs) ARCH=x86_64: allnoconfig, defconfig, allyesconfig, (various broken configs) Hopefully, after this patch I won't get any more compile broken emails. :-) v3: changed a couple of 'linux/nmi.h' -> 'asm/nmi.h' to pick-up correct function prototypes when CONFIG_HARDLOCKUP_DETECTOR is not set. Signed-off-by: Don Zickus <dzickus@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: fweisbec@gmail.com LKML-Reference: <1293044403-14117-1-git-send-email-dzickus@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-12-16x86, of: Define irq functions to allow drivers/of/* to build on x86Andres Salomon1-0/+3
- Define a stub irq_create_of_mapping for x86 as a stop-gap solution until drivers/of/irq is further along. - Define irq_dispose_mapping for x86 to appease of_i2c.c These are needed to allow stuff in drivers/of/ to build on x86. This stuff will eventually get replaced; quoting Grant, "The long term plan is to have the drivers/of/ code handling the mapping intelligently like powerpc currently does." But for now, just provide these functions. Signed-off-by: Andres Salomon <dilinger@queued.net> LKML-Reference: <20101111214526.5de7121b@queued.net> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2010-10-27x86-32: Allocate irq stacks seperate from percpu areaBrian Gerst1-2/+0
The percpu allocator cannot handle alignments larger than one page. Allocate the irq stacks seperately, and only keep the pointers as percpu data. Signed-off-by: Brian Gerst <brgerst@gmail.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: tj@kernel.org LKML-Reference: <1288158182-1753-1-git-send-email-brgerst@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-06-29x86: Always use irq stacksChristoph Hellwig1-7/+5
IRQ stacks provide much better safety against unexpected stack use from interrupts, at the minimal downside of slightly higher memory usage. Enable irq stacks also for the default 8k stack on 32-bit kernels to minimize the problem of stack overflows through interrupt activity. This is what the 64-bit kernel and various other architectures already do. Signed-off-by: Christoph Hellwig <hch@lst.de> LKML-Reference: <20100628121554.GA6605@lst.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2010-02-24x86, legacy_irq: Remove left over nr_legacy_irqsYinghai Lu1-1/+0
nr_legacy_irqs and its ilk have moved to legacy_pic. -v2: there is one in ioapic_.c Singed-off-by: Yinghai Lu <yinghai@kernel.org> LKML-Reference: <4B84AAC4.2020204@kernel.org> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-01-20x86, irq: Don't block IRQ0_VECTOR..IRQ15_VECTOR's on all cpu'sSuresh Siddha1-0/+1
Currently IRQ0..IRQ15 are assigned to IRQ0_VECTOR..IRQ15_VECTOR's on all the cpu's. If these IRQ's are handled by legacy pic controller, then the kernel handles them only on cpu 0. So there is no need to block this vector space on all cpu's. Similarly if these IRQ's are handled by IO-APIC, then the IRQ affinity will determine on which cpu's we need allocate the vector resource for that particular IRQ. This can be done dynamically and here also there is no need to block 16 vectors for IRQ0..IRQ15 on all cpu's. Fix this by initially assigning IRQ0..IRQ15 to IRQ0_VECTOR..IRQ15_VECTOR's only on cpu 0. If the legacy controllers like pic handles these irq's, then this configuration will be fixed. If more modern controllers like IO-APIC handle these IRQ's, then we start with this configuration and as IRQ's migrate, vectors (/and cpu's) associated with these IRQ's change dynamically. This will freeup the block of 16 vectors on other cpu's which don't handle IRQ0..IRQ15, which can now be used for other IRQ's that the particular cpu handle. [ hpa: this also an architectural cleanup for future legacy-PIC-free configurations. ] [ hpa: fixed typo NR_LEGACY_IRQS -> NR_IRQS_LEGACY ] Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> LKML-Reference: <1263932453.2814.52.camel@sbs-t61.sc.intel.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-12-09Merge branch 'x86-uv-for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-uv-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: UV RTC: Always enable RTC clocksource x86: UV RTC: Rename generic_interrupt to x86_platform_ipi x86: UV RTC: Clean up error handling x86: UV RTC: Add clocksource only boot option x86: UV RTC: Fix early expiry handling
2009-11-02x86: Force irq complete move during cpu offlineSuresh Siddha1-0/+1
When a cpu goes offline, fixup_irqs() try to move irq's currently destined to the offline cpu to a new cpu. But this attempt will fail if the irq is recently moved to this cpu and the irq still hasn't arrived at this cpu (for non intr-remapping platforms this is when we free the vector allocation at the previous destination) that is about to go offline. This will endup with the interrupt subsystem still pointing the irq to the offline cpu, causing that irq to not work any more. Fix this by forcing the irq to complete its move (its been a long time we moved the irq to this cpu which we are offlining now) and then move this irq to a new cpu before this cpu goes offline. Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Acked-by: Gary Hade <garyhade@us.ibm.com> Cc: Eric W. Biederman <ebiederm@xmission.com> LKML-Reference: <20091026230001.848830905@sbs-t61.sc.intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-14x86: UV RTC: Rename generic_interrupt to x86_platform_ipiDimitri Sivanich1-1/+1
Signed-off-by: Dimitri Sivanich <sivanich@sgi.com> LKML-Reference: <20091014142257.GE11048@sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-31x86: Move irq_init to x86_init_opsThomas Gleixner1-1/+0
irq_init is overridden by x86_quirks and by paravirts. Unify the whole mess and make it an unconditional x86_init_ops function which defaults to the standard function and can be overridden by the early platform code. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-08-31x86: Move pre_intr_init to x86_init_opsThomas Gleixner1-0/+2
Replace the quirk machinery by a x86_init_ops function which defaults to the standard implementation. This is also a preparatory patch for Moorestown support which needs to replace the default init_ISA_irqs as well. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-03-04x86: UV, SGI RTC: add generic system vectorDimitri Sivanich1-0/+1
This patch allocates a system interrupt vector for various platform specific uses. Signed-off-by: Dimitri Sivanich <sivanich@sgi.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: john stultz <johnstul@us.ibm.com> LKML-Reference: <20090304185605.GA24419@sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-09x86: unify do_IRQ()Jeremy Fitzhardinge1-1/+2
With the differences in interrupt handling hoisted into handle_irq(), do_IRQ is more or less identical between 32 and 64 bit, so unify it. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-09x86: add handle_irq() to allow interrupt injectionJeremy Fitzhardinge1-0/+1
Xen uses a different interrupt path, so introduce handle_irq() to allow interrupts to be inserted into the normal interrupt path. This is handled slightly differently on 32 and 64-bit. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-02Merge branch 'cpus4096-for-linus-2' of ↵Linus Torvalds1-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'cpus4096-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (66 commits) x86: export vector_used_by_percpu_irq x86: use logical apicid in x2apic_cluster's x2apic_cpu_mask_to_apicid_and() sched: nominate preferred wakeup cpu, fix x86: fix lguest used_vectors breakage, -v2 x86: fix warning in arch/x86/kernel/io_apic.c sched: fix warning in kernel/sched.c sched: move test_sd_parent() to an SMP section of sched.h sched: add SD_BALANCE_NEWIDLE at MC and CPU level for sched_mc>0 sched: activate active load balancing in new idle cpus sched: bias task wakeups to preferred semi-idle packages sched: nominate preferred wakeup cpu sched: favour lower logical cpu number for sched_mc balance sched: framework for sched_mc/smt_power_savings=N sched: convert BALANCE_FOR_xx_POWER to inline functions x86: use possible_cpus=NUM to extend the possible cpus allowed x86: fix cpu_mask_to_apicid_and to include cpu_online_mask x86: update io_apic.c to the new cpumask code x86: Introduce topology_core_cpumask()/topology_thread_cpumask() x86: xen: use smp_call_function_many() x86: use work_on_cpu in x86/kernel/cpu/mcheck/mce_amd_64.c ... Fixed up trivial conflict in kernel/time/tick-sched.c manually
2008-12-24x86: fix lguest used_vectors breakage, -v2Yinghai Lu1-0/+1
Impact: fix lguest, clean up 32-bit lguest used used_vectors to record vectors, but that model of allocating vectors changed and got broken, after we changed vector allocation to a per_cpu array. Try enable that for 64bit, and the array is used for all vectors that are not managed by vector_irq per_cpu array. Also kill system_vectors[], that is now a duplication of the used_vectors bitmap. [ merged in cpus4096 due to io_apic.c cpumask changes. ] [ -v2, fix build failure ] Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-17x86: fixup_irqs() doesnt need an argument.Mike Travis1-1/+1
Impact: cleanup, remove on-stack cpumask. The "map" arg is always cpu_online_mask. Importantly, set_affinity always ands the argument with cpu_online_mask anyway, so we don't need to do it in fixup_irqs(), avoiding a temporary. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Mike Travis <travis@sgi.com>
2008-10-27x86: remove dead IRQBALANCE codeDan McGee1-4/+0
Impact: cleanup CONFIG_IRQBALANCE was removed in commit 8b8e8c1bf; this ifdef was still around. Signed-off-by: Dan McGee <dpmcgee@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>