| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
commit 9073428bb204d921ae15326bb7d4558d9d269aab upstream.
The SEV-SNP IBPB-on-Entry feature does not require a guest-side
implementation. It was added in Zen5 h/w, after the first SNP Zen
implementation, and thus was not accounted for when the initial set of SNP
features were added to the kernel.
In its abundant precaution, commit
8c29f0165405 ("x86/sev: Add SEV-SNP guest feature negotiation support")
included SEV_STATUS' IBPB-on-Entry bit as a reserved bit, thereby masking
guests from using the feature.
Allow guests to make use of IBPB-on-Entry when supported by the hypervisor, as
the bit is now architecturally defined and safe to expose.
Fixes: 8c29f0165405 ("x86/sev: Add SEV-SNP guest feature negotiation support")
Signed-off-by: Kim Phillips <kim.phillips@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Nikunj A Dadhania <nikunj@amd.com>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Cc: stable@kernel.org
Link: https://patch.msgid.link/20260203222405.4065706-2-kim.phillips@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit af05e558988ed004a20fc4de7d0f80cfbba663f0 ]
Use the proper helper instead of an open-coded variant.
Closes: https://lore.kernel.org/r/202512202235.WHPQkLZu-lkp@intel.com
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Julia Lawall <julia.lawall@inria.fr>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://patch.msgid.link/20260112114147.GBaWTd-8HSy_Xp4S3X@fat_crate.local
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 9efb74f84ba82a9de81fc921baf3c5e2decf8256 ]
With Debian clang version 19.1.7 (3+build5) there are calls to
kasan_check_write() from __sev_es_nmi_complete(), which violates noinstr. Fix
it by disabling GCOV for the noinstr object, as has been done for previous
such instrumentation issues.
Note that this file already disables __SANITIZE_ADDRESS__ and
__SANITIZE_THREAD__, thus calls like kasan_check_write() ought to be nops
regardless of GCOV. This has been fixed in other patches. However, to avoid
any other accidental instrumentation showing up, (and since, in principle GCOV
is instrumentation and hence should be disabled for noinstr code anyway),
disable GCOV overall as well.
Signed-off-by: Brendan Jackman <jackmanb@google.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Marco Elver <elver@google.com>
Link: https://patch.msgid.link/20251216-gcov-inline-noinstr-v3-3-10244d154451@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
Conflicts:
arch/x86/include/asm/sev-internal.h
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
This function is going away so replace the callsites with the equivalent
functionality. Add a new SAVIC-specific termination reason. If more
granularity is needed there, it will be revisited in the future.
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
|
|
In order to be able to have tight control over which code may execute
from the early 1:1 mapping of memory, but still link vmlinux as a single
executable, prefix all symbol references in startup code with __pi_, and
invoke it from outside using the __pi_ prefix.
Use objtool to check that no absolute symbol references are present in
the startup code, as these cannot be used from code running from the 1:1
mapping.
Note that this also requires disabling the latent-entropy GCC plugin, as
the global symbol references that it injects would require explicit
exports, and given that the startup code rarely executes more than once,
it is not a useful source of entropy anyway.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/20250828102202.1849035-43-ardb+git@google.com
|
|
Rename sev-nmi.c to noinstr.c, and move the get/put GHCB routines into it too,
which are also annotated as 'noinstr' and suffer from the same problem as the
NMI code, i.e., that GCC may ignore the __no_sanitize_address__ function
attribute implied by 'noinstr' and insert KASAN instrumentation anyway.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/20250828102202.1849035-37-ardb+git@google.com
|
|
Provide PIC aliases for data objects that are shared between the SEV startup
code and the SEV code that executes later. This is needed so that the confined
startup code is permitted to access them.
This requires some of these variables to be moved into a source file that is
not part of the startup code, as the PIC alias is already implied, and
exporting variables in the opposite direction is not supported.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/20250828102202.1849035-36-ardb+git@google.com
|
|
To avoid having to reason about whether or not to use the per-CPU SVSM calling
area when running startup and init code on the boot CPU, reuse the boot SVSM
calling area as the per-CPU area for the BSP.
Thus, remove the need to make the per-CPU variables and associated state in
sev_cfg accessible to the startup code once confined.
[ bp: Massage commit message. ]
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/20250828102202.1849035-33-ardb+git@google.com
|
|
The early page state change API is mostly only used very early, when only the
boot time SVSM calling area is in use. However, this API is also called by the
kexec finishing code, which runs very late, and potentially from a different
CPU (which uses a different calling area).
To avoid pulling the per-CPU SVSM calling area pointers and related SEV state
into the startup code, refactor the page state change API so the SVSM calling
area virtual and physical addresses can be provided by the caller.
No functional change intended.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/20250828102202.1849035-32-ardb+git@google.com
|
|
The boottime SVSM calling area is used both by the startup code running from
a 1:1 mapping, and potentially later on running from the ordinary kernel
mapping.
This SVSM calling area is statically allocated, and so its physical address
doesn't change. However, its virtual address depends on the calling context
(1:1 mapping or kernel virtual mapping), and even though the variable that
holds the virtual address of this calling area gets updated from 1:1 address
to kernel address during the boot, it is hard to reason about why this is
guaranteed to be safe.
So instead, take the RIP-relative address of the boottime SVSM calling area
whenever its virtual address is required, and only use a global variable for
the physical address.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/20250828102202.1849035-30-ardb+git@google.com
|
|
Both the decompressor and the core kernel implement an early #VC handler,
which only deals with CPUID instructions, and full featured one, which can
handle any #VC exception.
The former communicates with the hypervisor using the MSR based protocol,
whereas the latter uses a shared GHCB page, which is configured a bit later
during the boot, when the kernel runs from its ordinary virtual mapping,
rather than the 1:1 mapping that the startup code uses.
Accessing this shared GHCB page from the core kernel's startup code is
problematic, because it involves converting the GHCB address provided by the
caller to a physical address. In the startup code, virtual to physical address
translations are problematic, given that the virtual address might be a 1:1
mapped address, and such translations should therefore be avoided.
This means that exposing startup code dealing with the GHCB to callers that
execute from the ordinary kernel virtual mapping should be avoided too. So
move all GHCB page based communication out of the startup code, now that all
communication occurring before the kernel virtual mapping is up relies on the
MSR protocol only.
As an exception, add a flag representing the need to apply the coherency
fix in order to avoid exporting CPUID* helpers because of the code
running too early for the *cpu_has* infrastructure.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/20250828102202.1849035-29-ardb+git@google.com
|
|
The SECURE_AVIC_CONTROL MSR holds the GPA of the guest APIC backing page and
bitfields to control enablement of Secure AVIC and whether the guest allows
NMIs to be injected by the hypervisor.
This MSR is populated by the guest and can be read by the guest to get the GPA
of the APIC backing page. The MSR can only be accessed in Secure AVIC mode.
Any attempt to access it when not in Secure AVIC mode results in #GP. So, the
hypervisor should not intercept it. A #VC exception will be generated
otherwise. If this occurs and Secure AVIC is enabled, terminate the guest
execution.
Signed-off-by: Neeraj Upadhyay <Neeraj.Upadhyay@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Tianyu Lan <tiala@microsoft.com>
Link: https://lore.kernel.org/20250828113119.209135-1-Neeraj.Upadhyay@amd.com
|
|
Add a apic->teardown() callback to disable Secure AVIC before rebooting into
the new kernel. This ensures that the new kernel does not access the old APIC
backing page which was allocated by the previous kernel.
Such accesses can happen if there are any APIC accesses done during the guest
boot before Secure AVIC driver probe is done by the new kernel (as Secure AVIC
would have remained enabled in the Secure AVIC control MSR).
Signed-off-by: Neeraj Upadhyay <Neeraj.Upadhyay@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/20250828112008.209013-1-Neeraj.Upadhyay@amd.com
|
|
Now that support to send NMI IPI and support to inject NMI from the hypervisor
has been added, set V_NMI_ENABLE in the VINTR_CTRL field of the VMSA to enable
NMI for Secure AVIC guests.
[ bp: Zap useless brackets. ]
Signed-off-by: Kishon Vijay Abraham I <kvijayab@amd.com>
Signed-off-by: Neeraj Upadhyay <Neeraj.Upadhyay@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Tianyu Lan <tiala@microsoft.com>
Link: https://lore.kernel.org/20250828111315.208959-1-Neeraj.Upadhyay@amd.com
|
|
Virtual GIF (VGIF) provides masking capability for when virtual interrupts
(virtual maskable interrupts, virtual NMIs) can be taken by the guest vCPU.
The Secure AVIC hardware reads VGIF state from the vCPU's VMSA. So, set VGIF for
secondary CPUs (the configuration for the boot CPU is done by the hypervisor),
to unmask delivery of virtual interrupts to the vCPU.
Signed-off-by: Kishon Vijay Abraham I <kvijayab@amd.com>
Signed-off-by: Neeraj Upadhyay <Neeraj.Upadhyay@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Tianyu Lan <tiala@microsoft.com>
Link: https://lore.kernel.org/20250828111141.208920-1-Neeraj.Upadhyay@amd.com
|
|
Secure AVIC requires the LAPIC timer to be emulated by the hypervisor. KVM
already supports emulating the LAPIC timer using hrtimers. In order to emulate
it, APIC_LVTT, APIC_TMICT and APIC_TDCR register values need to be propagated
to the hypervisor for arming the timer. APIC_TMCCT register value has to be
read from the hypervisor, which is required for calibrating the APIC timer.
So, read/write all APIC timer registers from/to the hypervisor.
Co-developed-by: Kishon Vijay Abraham I <kvijayab@amd.com>
Signed-off-by: Kishon Vijay Abraham I <kvijayab@amd.com>
Signed-off-by: Neeraj Upadhyay <Neeraj.Upadhyay@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Tianyu Lan <tiala@microsoft.com>
Link: https://lore.kernel.org/20250828110926.208866-1-Neeraj.Upadhyay@amd.com
|
|
Secure AVIC hardware accelerates only Self-IPI, i.e. on WRMSR to APIC_SELF_IPI
and APIC_ICR (with destination shorthand equal to Self) registers, hardware
takes care of updating the APIC_IRR in the APIC backing page of the vCPU.
For other IPI types (cross-vCPU, broadcast IPIs), software needs to take care
of updating the APIC_IRR state of the target vCPUs and to ensure that the
target vCPUs notice the new pending interrupt.
Add new callbacks in the Secure AVIC driver for sending IPI requests. These
callbacks update the IRR in the target guest vCPU's APIC backing page. To
ensure that the remote vCPU notices the new pending interrupt, reuse the GHCB
MSR handling code in vc_handle_msr() to issue APIC_ICR MSR-write GHCB protocol
event to the hypervisor.
For Secure AVIC guests, on APIC_ICR write MSR exits, the hypervisor notifies
the target vCPU by either sending an AVIC doorbell (if target vCPU is running)
or by waking up the non-running target vCPU.
Co-developed-by: Kishon Vijay Abraham I <kvijayab@amd.com>
Signed-off-by: Kishon Vijay Abraham I <kvijayab@amd.com>
Signed-off-by: Neeraj Upadhyay <Neeraj.Upadhyay@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Tianyu Lan <tiala@microsoft.com>
Link: https://lore.kernel.org/20250828110824.208851-1-Neeraj.Upadhyay@amd.com
|
|
With Secure AVIC, the APIC backing page is owned and managed by the guest.
Allocate and initialize APIC backing page for all guest CPUs.
The NPT entry for a vCPU's APIC backing page must always be present when the
vCPU is running in order for Secure AVIC to function. A VMEXIT_BUSY is
returned on VMRUN and the vCPU cannot be resumed otherwise.
To handle this, notify GPA of the vCPU's APIC backing page to the hypervisor
by using the SVM_VMGEXIT_SECURE_AVIC GHCB protocol event. Before executing
VMRUN, the hypervisor makes use of this information to make sure the APIC
backing page is mapped in the NPT.
[ bp: Massage commit message. ]
Co-developed-by: Kishon Vijay Abraham I <kvijayab@amd.com>
Signed-off-by: Kishon Vijay Abraham I <kvijayab@amd.com>
Signed-off-by: Neeraj Upadhyay <Neeraj.Upadhyay@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Tianyu Lan <tiala@microsoft.com>
Link: https://lore.kernel.org/20250828070334.208401-3-Neeraj.Upadhyay@amd.com
|
|
The Secure AVIC feature provides SEV-SNP guests hardware acceleration for
performance sensitive APIC accesses while securely managing the guest-owned
APIC state through the use of a private APIC backing page.
This helps prevent the hypervisor from generating unexpected interrupts for
a vCPU or otherwise violate architectural assumptions around the APIC
behavior.
Add a new x2APIC driver that will serve as the base of the Secure AVIC
support. It is initially the same as the x2APIC physical driver (without IPI
callbacks), but will be modified as features are implemented.
As the new driver does not implement Secure AVIC features yet, if the
hypervisor sets the Secure AVIC bit in SEV_STATUS, maintain the existing
behavior to enforce the guest termination.
[ bp: Massage commit message. ]
Co-developed-by: Kishon Vijay Abraham I <kvijayab@amd.com>
Signed-off-by: Kishon Vijay Abraham I <kvijayab@amd.com>
Signed-off-by: Neeraj Upadhyay <Neeraj.Upadhyay@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Tianyu Lan <tiala@microsoft.com>
Link: https://lore.kernel.org/20250828070334.208401-2-Neeraj.Upadhyay@amd.com
|
|
There are two distinct callers of snp_cpuid(): the MSR protocol and the GHCB
page based interface.
The snp_cpuid() logic does not care about the distinction, which only matters
at a lower level. But the fact that it supports both interfaces means that the
GHCB page based logic is pulled into the early startup code where PA to VA
conversions are problematic, given that it runs from the 1:1 mapping of memory.
So keep snp_cpuid() itself in the startup code, but factor out the hypervisor
calls via a callback, so that the GHCB page handling can be moved out.
Code refactoring only - no functional change intended.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/20250828102202.1849035-25-ardb+git@google.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Remove a transitional asm/cpuid.h header which was added only as a
fallback during cpuid helpers reorg
- Initialize reserved fields in the SVSM page validation calls
structure to zero in order to allow for future structure extensions
- Have the sev-guest driver's buffers used in encryption operations be
in linear mapping space as the encryption operation can be offloaded
to an accelerator
- Have a read-only MSR write when in an AMD SNP guest trap to the
hypervisor as it is usually done. This makes the guest user
experience better by simply raising a #GP instead of terminating said
guest
- Do not output AVX512 elapsed time for kernel threads because the data
is wrong and fix a NULL pointer dereferencing in the process
- Adjust the SRSO mitigation selection to the new attack vectors
* tag 'x86_urgent_for_v6.17_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/cpuid: Remove transitional <asm/cpuid.h> header
x86/sev: Ensure SVSM reserved fields in a page validation entry are initialized to zero
virt: sev-guest: Satisfy linear mapping requirement in get_derived_key()
x86/sev: Improve handling of writes to intercepted TSC MSRs
x86/fpu: Fix NULL dereference in avx512_status()
x86/bugs: Select best SRSO mitigation
|
|
initialized to zero
In order to support future versions of the SVSM_CORE_PVALIDATE call, all
reserved fields within a PVALIDATE entry must be set to zero as an SVSM should
be ensuring all reserved fields are zero in order to support future usage of
reserved areas based on the protocol version.
Fixes: fcd042e86422 ("x86/sev: Perform PVALIDATE using the SVSM when not at VMPL0")
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Joerg Roedel <joerg.roedel@amd.com>
Cc: <stable@kernel.org>
Link: https://lore.kernel.org/7cde412f8b057ea13a646fb166b1ca023f6a5031.1755098819.git.thomas.lendacky@amd.com
|
|
Currently, when a Secure TSC enabled SNP guest attempts to write to the
intercepted GUEST_TSC_FREQ MSR (a read-only MSR), the guest kernel response
incorrectly implies a VMM configuration error, when in fact it is the usual
VMM configuration to intercept writes to read-only MSRs, unless explicitly
documented.
Modify the intercepted TSC MSR #VC handling:
* Write to GUEST_TSC_FREQ will generate a #GP instead of terminating the
guest
* Write to MSR_IA32_TSC will generate a #GP instead of silently ignoring it
However, continue to terminate the guest when reading from intercepted
GUEST_TSC_FREQ MSR with Secure TSC enabled, as intercepted reads indicate an
improper VMM configuration for Secure TSC enabled SNP guests.
[ bp: simplify comment. ]
Fixes: 38cc6495cdec ("x86/sev: Prevent GUEST_TSC_FREQ MSR interception for Secure TSC enabled guests")
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Nikunj A Dadhania <nikunj@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/20250722074853.22253-1-nikunj@amd.com
|
|
An SNP cache coherency vulnerability requires a cache line eviction
mitigation when validating memory after a page state change to private.
The specific mitigation is to touch the first and last byte of each 4K
page that is being validated. There is no need to perform the mitigation
when performing a page state change to shared and rescinding validation.
CPUID bit Fn8000001F_EBX[31] defines the COHERENCY_SFW_NO CPUID bit
that, when set, indicates that the software mitigation for this
vulnerability is not needed.
Implement the mitigation and invoke it when validating memory (making it
private) and the COHERENCY_SFW_NO bit is not set, indicating the SNP
guest is vulnerable.
Co-developed-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 SEV updates from Borislav Petkov:
- Map the SNP calling area pages too so that OVMF EFI fw can issue SVSM
calls properly with the goal of implementing EFI variable store in
the SVSM - a component which is trusted by the guest, vs in the
firmware, which is not
- Allow the kernel to handle #VC exceptions from EFI runtime services
properly when running as a SNP guest
- Rework and cleanup the SNP guest request issue glue code a bit
* tag 'x86_sev_for_v6.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/sev: Let sev_es_efi_map_ghcbs() map the CA pages too
x86/sev/vc: Fix EFI runtime instruction emulation
x86/sev: Drop unnecessary parameter in snp_issue_guest_request()
x86/sev: Document requirement for linear mapping of guest request buffers
x86/sev: Allocate request in TSC_INFO_REQ on stack
virt: sev-guest: Contain snp_guest_request_ioctl in sev-guest
|
|
Forcibly disable KCSAN for the sev-nmi.c source file, which only
contains functions annotated as 'noinstr' but is emitted with calls to
KCSAN instrumentation nonetheless. E.g.,
vmlinux.o: error: objtool: __sev_es_nmi_complete+0x58: call to __kcsan_check_access() leaves .noinstr.text section
make[2]: *** [/usr/local/google/home/ardb/linux/scripts/Makefile.vmlinux_o:72: vmlinux.o] Error 1
Fixes: a3cbbb4717e1 ("x86/boot: Move SEV startup code into startup/")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/20250714073402.4107091-2-ardb+git@google.com
|
|
When using Secure TSC, the GUEST_TSC_FREQ MSR reports a frequency based on
the nominal P0 frequency, which deviates slightly (typically ~0.2%) from
the actual mean TSC frequency due to clocking parameters.
Over extended VM uptime, this discrepancy accumulates, causing clock skew
between the hypervisor and a SEV-SNP VM, leading to early timer interrupts as
perceived by the guest.
The guest kernel relies on the reported nominal frequency for TSC-based
timekeeping, while the actual frequency set during SNP_LAUNCH_START may
differ. This mismatch results in inaccurate time calculations, causing the
guest to perceive hrtimers as firing earlier than expected.
Utilize the TSC_FACTOR from the SEV firmware's secrets page (see "Secrets
Page Format" in the SNP Firmware ABI Specification) to calculate the mean
TSC frequency, ensuring accurate timekeeping and mitigating clock skew in
SEV-SNP VMs.
Use early_ioremap_encrypted() to map the secrets page as
ioremap_encrypted() uses kmalloc() which is not available during early TSC
initialization and causes a panic.
[ bp: Drop the silly dummy var:
https://lore.kernel.org/r/20250630192726.GBaGLlHl84xIopx4Pt@fat_crate.local ]
Fixes: 73bbf3b0fbba ("x86/tsc: Init the TSC for Secure TSC guests")
Signed-off-by: Nikunj A Dadhania <nikunj@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/20250630081858.485187-1-nikunj@amd.com
|
|
OVMF EFI firmware needs access to the CA page to do SVSM protocol calls. For
example, when the SVSM implements an EFI variable store, such calls will be
necessary.
So add that to sev_es_efi_map_ghcbs() and also rename the function to reflect
the additional job it is doing now.
[ bp: Massage. ]
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/20250626114014.373748-4-kraxel@redhat.com
|
|
In case efi_mm is active go use the userspace instruction decoder which
supports fetching instructions from active_mm. This is needed to make
instruction emulation work for EFI runtime code, so it can use CPUID and
RDMSR.
EFI runtime code uses the CPUID instruction to gather information about
the environment it is running in, such as SEV being enabled or not, and
choose (if needed) the SEV code path for ioport access.
EFI runtime code uses the RDMSR instruction to get the location of the
CAA page (see SVSM spec, section 4.2 - "Post Boot").
The big picture behind this is that the kernel needs to be able to
properly handle #VC exceptions that come from EFI runtime services.
Since EFI runtime services have a special page table mapping for the EFI
virtual address space, the efi_mm context must be used when decoding
instructions during #VC handling.
[ bp: Massage. ]
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Pankaj Gupta <pankaj.gupta@amd.com>
Link: https://lore.kernel.org/20250626114014.373748-2-kraxel@redhat.com
|
|
Commit
3e385c0d6ce8 ("virt: sev-guest: Move SNP Guest Request data pages handling under snp_cmd_mutex")
moved @input from snp_msg_desc to snp_guest_req which is passed to
snp_issue_guest_request().
Drop the extra parameter.
No functional change intended.
Signed-off-by: Alexey Kardashevskiy <aik@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Dionna Glaze <dionnaglaze@google.com>
Link: https://lore.kernel.org/20250611040842.2667262-5-aik@amd.com
|
|
The Guest Request supports 3 types of messages now, the largest is the
extended variant of MSG_REPORT_REQ: sizeof(snp_ext_report_req)==112. These
used to be allocated on stack and then moved to the SNP guest platform device
(snp_guest_dev) for the reason explained in
db10cb9b5746 ("virt: sevguest: Fix passing a stack buffer as a scatterlist target"):
aesgcm_encrypt() and aesgcm_decrypt() are used for guest messages and might
potentially use a crypto accelerator which requires DMA buffers to be in the
linear mapping.
Add a comment, warn and return an error when the buffers are not in linear
mapping.
Signed-off-by: Alexey Kardashevskiy <aik@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Dionna Glaze <dionnaglaze@google.com>
Link: https://lore.kernel.org/20250611040842.2667262-4-aik@amd.com
|
|
Allocate a 88 byte request structure on stack and skip needless
kzalloc/kfree.
While at this, correct indent.
No functional change intended.
Signed-off-by: Alexey Kardashevskiy <aik@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Dionna Glaze <dionnaglaze@google.com>
Link: https://lore.kernel.org/20250611040842.2667262-3-aik@amd.com
|
|
SNP Guest Request uses only exitinfo2 which is a return value from GHCB, has
meaning beyond ioctl and therefore belongs to struct snp_guest_req.
Move exitinfo2 there and remove snp_guest_request_ioctl from the SEV platform
code.
No functional change intended.
Signed-off-by: Alexey Kardashevskiy <aik@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Dionna Glaze <dionnaglaze@google.com>
Link: https://lore.kernel.org/20250611040842.2667262-2-aik@amd.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyperv updates from Wei Liu:
- Support for Virtual Trust Level (VTL) on arm64 (Roman Kisel)
- Fixes for Hyper-V UIO driver (Long Li)
- Fixes for Hyper-V PCI driver (Michael Kelley)
- Select CONFIG_SYSFB for Hyper-V guests (Michael Kelley)
- Documentation updates for Hyper-V VMBus (Michael Kelley)
- Enhance logging for hv_kvp_daemon (Shradha Gupta)
* tag 'hyperv-next-signed-20250602' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: (23 commits)
Drivers: hv: Always select CONFIG_SYSFB for Hyper-V guests
Drivers: hv: vmbus: Add comments about races with "channels" sysfs dir
Documentation: hyperv: Update VMBus doc with new features and info
PCI: hv: Remove unnecessary flex array in struct pci_packet
Drivers: hv: Remove hv_alloc/free_* helpers
Drivers: hv: Use kzalloc for panic page allocation
uio_hv_generic: Align ring size to system page
uio_hv_generic: Use correct size for interrupt and monitor pages
Drivers: hv: Allocate interrupt and monitor pages aligned to system page boundary
arch/x86: Provide the CPU number in the wakeup AP callback
x86/hyperv: Fix APIC ID and VP index confusion in hv_snp_boot_ap()
PCI: hv: Get vPCI MSI IRQ domain from DeviceTree
ACPI: irq: Introduce acpi_get_gsi_dispatcher()
Drivers: hv: vmbus: Introduce hv_get_vmbus_root_device()
Drivers: hv: vmbus: Get the IRQ number from DeviceTree
dt-bindings: microsoft,vmbus: Add interrupt and DMA coherence properties
arm64, x86: hyperv: Report the VTL the system boots in
arm64: hyperv: Initialize the Virtual Trust Level field
Drivers: hv: Provide arch-neutral implementation of get_vtl()
Drivers: hv: Enable VTL mode for arm64
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/devsec/tsm
Pull trusted security manager (TSM) updates from Dan Williams:
- Add a general sysfs scheme for publishing "Measurement" values
provided by the architecture's TEE Security Manager. Use it to
publish TDX "Runtime Measurement Registers" ("RTMRs") that either
maintain a hash of stored values (similar to a TPM PCR) or provide
statically provisioned data. These measurements are validated by a
relying party.
- Reorganize the drivers/virt/coco/ directory for "host" and "guest"
shared infrastructure.
- Fix a configfs-tsm-report unregister bug
- With CONFIG_TSM_MEASUREMENTS joining CONFIG_TSM_REPORTS and in
anticipation of more shared "TSM" infrastructure arriving, rename the
maintainer entry to "TRUSTED SECURITY MODULE (TSM) INFRASTRUCTURE".
* tag 'tsm-for-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/devsec/tsm:
tsm-mr: Fix init breakage after bin_attrs constification by scoping non-const pointers to init phase
sample/tsm-mr: Fix missing static for sample_report
virt: tdx-guest: Transition to scoped_cond_guard for mutex operations
virt: tdx-guest: Refactor and streamline TDREPORT generation
virt: tdx-guest: Expose TDX MRs as sysfs attributes
x86/tdx: tdx_mcall_get_report0: Return -EBUSY on TDCALL_OPERAND_BUSY error
x86/tdx: Add tdx_mcall_extend_rtmr() interface
tsm-mr: Add tsm-mr sample code
tsm-mr: Add TVM Measurement Register support
configfs-tsm-report: Fix NULL dereference of tsm_ops
coco/guest: Move shared guest CC infrastructure to drivers/virt/coco/guest/
configfs-tsm: Namespace TSM report symbols
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull AMD SEV update from Borislav Petkov:
"Add a virtual TPM driver glue which allows a guest kernel to talk to a
TPM device emulated by a Secure VM Service Module (SVSM) - a helper
module of sorts which runs at a different privilege level in the
SEV-SNP VM stack.
The intent being that a TPM device is emulated by a trusted entity and
not by the untrusted host which is the default assumption in the
confidential computing scenarios"
* tag 'x86_sev_for_v6.16_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/sev: Register tpm-svsm platform device
tpm: Add SNP SVSM vTPM driver
svsm: Add header with SVSM_VTPM_CMD helpers
x86/sev: Add SVSM vTPM probe/send_command functions
|
|
When starting APs, confidential guests and paravisor guests
need to know the CPU number, and the pattern of using the linear
search has emerged in several places. With N processors that leads
to the O(N^2) time complexity.
Provide the CPU number in the AP wake up callback so that one can
get the CPU number in constant time.
Suggested-by: Michael Kelley <mhklinux@outlook.com>
Signed-off-by: Roman Kisel <romank@linux.microsoft.com>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20250507182227.7421-3-romank@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20250507182227.7421-3-romank@linux.microsoft.com>
|
|
Pick up build fixes from upstream to make this tree more testable.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
The main CPUID header <asm/cpuid.h> was originally a storefront for the
headers:
<asm/cpuid/api.h>
<asm/cpuid/leaf_0x2_api.h>
Now that the latter CPUID(0x2) header has been merged into the former,
there is no practical difference between <asm/cpuid.h> and
<asm/cpuid/api.h>.
Migrate all users to the <asm/cpuid/api.h> header, in preparation of
the removal of <asm/cpuid.h>.
Don't remove <asm/cpuid.h> just yet, in case some new code in -next
started using it.
Suggested-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: x86-cpuid@lists.linux.dev
Link: https://lore.kernel.org/r/20250508150240.172915-3-darwi@linutronix.de
|
|
When shared pages are being converted to private during kdump, additional
checks are performed. They include handling the case of a GHCB page being
contained within a huge page.
Currently, this check incorrectly skips a page just below the GHCB page from
being transitioned back to private during kdump preparation.
This skipped page causes a 0x404 #VC exception when it is accessed later while
dumping guest memory for vmcore generation.
Correct the range to be checked for GHCB contained in a huge page. Also,
ensure that the skipped huge page containing the GHCB page is transitioned
back to private by applying the correct address mask later when changing GHCBs
to private at end of kdump preparation.
[ bp: Massage commit message. ]
Fixes: 3074152e56c9 ("x86/sev: Convert shared memory back to private on kexec")
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Tested-by: Srikanth Aithal <sraithal@amd.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/20250506183529.289549-1-Ashish.Kalra@amd.com
|
|
When kdump is running makedumpfile to generate vmcore and dump SNP guest
memory it touches the VMSA page of the vCPU executing kdump.
It then results in unrecoverable #NPF/RMP faults as the VMSA page is
marked busy/in-use when the vCPU is running and subsequently a causes
guest softlockup/hang.
Additionally, other APs may be halted in guest mode and their VMSA pages
are marked busy and touching these VMSA pages during guest memory dump
will also cause #NPF.
Issue AP_DESTROY GHCB calls on other APs to ensure they are kicked out
of guest mode and then clear the VMSA bit on their VMSA pages.
If the vCPU running kdump is an AP, mark it's VMSA page as offline to
ensure that makedumpfile excludes that page while dumping guest memory.
Fixes: 3074152e56c9 ("x86/sev: Convert shared memory back to private on kexec")
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Pankaj Gupta <pankaj.gupta@amd.com>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Tested-by: Srikanth Aithal <sraithal@amd.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/20250428214151.155464-1-Ashish.Kalra@amd.com
|
|
Conflicts:
arch/x86/boot/startup/sme.c
arch/x86/coco/sev/core.c
arch/x86/kernel/fpu/core.c
arch/x86/kernel/fpu/xstate.c
Semantic conflict:
arch/x86/include/asm/sev-internal.h
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Return `-EBUSY` from tdx_mcall_get_report0() when `TDG.MR.REPORT` returns
`TDCALL_OPERAND_BUSY`. This enables the caller to retry obtaining a
TDREPORT later if another VCPU is extending an RTMR concurrently.
Signed-off-by: Cedric Xing <cedric.xing@intel.com>
Acked-by: Dionna Amalie Glaze <dionnaglaze@google.com>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://patch.msgid.link/20250506-tdx-rtmr-v6-4-ac6ff5e9d58a@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
The TDX guest exposes one MRTD (Build-time Measurement Register) and four
RTMR (Run-time Measurement Register) registers to record the build and boot
measurements of a virtual machine (VM). These registers are similar to PCR
(Platform Configuration Register) registers in the TPM (Trusted Platform
Module) space. This measurement data is used to implement security features
like attestation and trusted boot.
To facilitate updating the RTMR registers, the TDX module provides support
for the `TDG.MR.RTMR.EXTEND` TDCALL which can be used to securely extend
the RTMR registers.
Add helper function to update RTMR registers. It will be used by the TDX
guest driver in enabling RTMR extension support.
Co-developed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Cedric Xing <cedric.xing@intel.com>
Acked-by: Dionna Amalie Glaze <dionnaglaze@google.com>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://patch.msgid.link/20250506-tdx-rtmr-v6-3-ac6ff5e9d58a@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Most of the SEV support code used to reside in a single C source file
that was included in two places: the core kernel, and the decompressor.
The code that is actually shared with the decompressor was moved into a
separate, shared source file under startup/, on the basis that the
decompressor also executes from the early 1:1 mapping of memory.
However, while the elaborate #VC handling and instruction decoding that
it involves is also performed by the decompressor, it does not actually
occur in the core kernel at early boot, and therefore, does not need to
be part of the confined early startup code.
So split off the #VC handling code and move it back into arch/x86/coco
where it came from, into another C source file that is included from
both the decompressor and the core kernel.
Code movement only - no functional change intended.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: Dionna Amalie Glaze <dionnaglaze@google.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Kevin Loughlin <kevinloughlin@google.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: linux-efi@vger.kernel.org
Link: https://lore.kernel.org/r/20250504095230.2932860-31-ardb+git@google.com
|
|
Add aliases for all the data objects that the startup code references -
this is needed so that this code can be moved into its own confined area
where it can only access symbols that have a __pi_ prefix.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: Dionna Amalie Glaze <dionnaglaze@google.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Kevin Loughlin <kevinloughlin@google.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: linux-efi@vger.kernel.org
Link: https://lore.kernel.org/r/20250504095230.2932860-39-ardb+git@google.com
|
|
__rdmsr() is the lowest level MSR write API, with native_rdmsr()
and native_rdmsrq() serving as higher-level wrappers around it.
#define native_rdmsr(msr, val1, val2) \
do { \
u64 __val = __rdmsr((msr)); \
(void)((val1) = (u32)__val); \
(void)((val2) = (u32)(__val >> 32)); \
} while (0)
static __always_inline u64 native_rdmsrq(u32 msr)
{
return __rdmsr(msr);
}
However, __rdmsr() continues to be utilized in various locations.
MSR APIs are designed for different scenarios, such as native or
pvops, with or without trace, and safe or non-safe. Unfortunately,
the current MSR API names do not adequately reflect these factors,
making it challenging to select the most appropriate API for
various situations.
To pave the way for improving MSR API names, convert __rdmsr()
uses to native_rdmsrq() to ensure consistent usage. Later, these
APIs can be renamed to better reflect their implications, such as
native or pvops, with or without trace, and safe or non-safe.
No functional change intended.
Signed-off-by: Xin Li (Intel) <xin@zytor.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Uros Bizjak <ubizjak@gmail.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20250427092027.1598740-10-xin@zytor.com
|
|
For historic reasons there are some TSC-related functions in the
<asm/msr.h> header, even though there's an <asm/tsc.h> header.
To facilitate the relocation of rdtsc{,_ordered}() from <asm/msr.h>
to <asm/tsc.h> and to eventually eliminate the inclusion of
<asm/msr.h> in <asm/tsc.h>, add an explicit <asm/msr.h> dependency
to the source files that reference definitions from <asm/msr.h>.
[ mingo: Clarified the changelog. ]
Signed-off-by: Xin Li (Intel) <xin@zytor.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Uros Bizjak <ubizjak@gmail.com>
Link: https://lore.kernel.org/r/20250501054241.1245648-1-xin@zytor.com
|
|
This commits breaks SNP guests:
234cf67fc3bd ("x86/sev: Split off startup code from core code")
The SNP guest boots, but no longer has access to the VMPCK keys needed
to communicate with the ASP, which is used, for example, to obtain an
attestation report.
The secrets_pa value is defined as static in both startup.c and
core.c. It is set by a function in startup.c and so when used in
core.c its value will be 0.
Share it again and add the sev_ prefix to put it into the global
SEV symbols namespace.
[ mingo: Renamed to sev_secrets_pa ]
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Cc: Dionna Amalie Glaze <dionnaglaze@google.com>
Cc: Kevin Loughlin <kevinloughlin@google.com>
Link: https://lore.kernel.org/r/cf878810-81ed-3017-52c6-ce6aa41b5f01@amd.com
|
