summaryrefslogtreecommitdiff
path: root/arch/sparc
AgeCommit message (Collapse)AuthorFilesLines
2011-05-18drivercore: revert addition of of_match to struct deviceGrant Likely2-3/+10
Commit b826291c, "drivercore/dt: add a match table pointer to struct device" added an of_match pointer to struct device to cache the of_match_table entry discovered at driver match time. This was unsafe because matching is not an atomic operation with probing a driver. If two or more drivers are attempted to be matched to a driver at the same time, then the cached matching entry pointer could get overwritten. This patch reverts the of_match cache pointer and reworks all users to call of_match_device() directly instead. Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-05-17sparc32,leon: Remove unnecessary page_address calls in LEON DMA API.Kristoffer Glembo1-26/+16
The function mmu_inval_dma_area takes a virtual address as a parameter which is problematic in case the buffer is located in highmem and the mapping currently is unavailable. Since the function was only implemented for LEON this patch removes calls to it in non LEON code paths and renames it to dma_make_coherent which instead takes a physical address (which for now is unused since we flush the whole cache). This way it is possible to remove several unnecessary calls to page_address which will fail if the virtual mapping is unavailable. Signed-off-by: Kristoffer Glembo <kristoffer@gaisler.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-17sparc: convert old cpumask API into new oneKOSAKI Motohiro16-105/+115
Adapt new API. Almost change is trivial, most important change are to remove following like =operator. cpumask_t cpu_mask = *mm_cpumask(mm); cpus_allowed = current->cpus_allowed; Because cpumask_var_t is =operator unsafe. These usage might prevent kernel core improvement. No functional change. Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-17sparc32, sun4d: Implemented SMP IPIs support for SUN4D machinesDaniel Hellstrom3-0/+94
The sun4d does not seem to have a distingstion between soft and hard IRQs. When generating IPIs the generated IRQ looks like a hard IRQ, this patch adds a "IPI check" in the sun4d irq trap handler at a predefined IRQ number (SUN4D_IPI_IRQ). Before generating an IPI a per-cpu memory structure is modified for the "IPI check" to successfully detect a IPI request to a specific processor, the check clears the IPI work requested. All three IPIs (resched, single and cpu-mask) use the same IRQ number. The IPI IRQ should preferrably be on a separate IRQ and definitly not shared with IRQ handlers requesting IRQ with IRQF_SHARED. Signed-off-by: Daniel Hellstrom <daniel@gaisler.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-17sparc32, sun4m: Implemented SMP IPIs support for SUN4M machinesDaniel Hellstrom3-9/+54
Implement the three IPIs (resched, single and cpu-mask) generation and interrupt handler catch. The sun4m has 15 soft-IRQs and three of them is used with this patch, the three IPIs was previously implemented with the cross-call IRQ15 which does not work with locking routines such as spinlocks because IRQ15 is NMI, it may cause deadlock. The IRQ trap handler code assumes (in the same spritit as the old it seems) that hard interrupts will be generated until handled (level), when a IRQ happens the IRQ pending register is checked for pending soft-IRQs. When both hard and soft IRQ happens at the same time only soft-IRQs are handled. The old code implemented a soft-IRQ traphandler at IRQ14 which called smp_reschedule_irq which in turn called set_need_resched. It seems to be an old relic and is replaced with the interrupt traphander exit code RESTORE_ALL, it calls schedule() when appropriate. Signed-off-by: Daniel Hellstrom <daniel@gaisler.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-17sparc32,leon: Implemented SMP IPIs for LEON CPUDaniel Hellstrom3-3/+126
This patch implements SMP IPIs on LEON using software generated IRQs to signal between CPUs. The IPI IRQ number is set by using the ipi_num property in the device tree, or defaults to 13. LEON SMP systems should reserve IRQ 13 (and IRQ 15) to Linux in order for the defaults to work. Signed-off-by: Daniel Hellstrom <daniel@gaisler.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-17sparc32: implement SMP IPIs using the generic functionsDaniel Hellstrom5-16/+71
The current sparc32 SMP IPI generation is implemented the cross call function. The cross call function uses IRQ15 the NMI, this is has the effect that IPIs will interrupt IRQ critical areas and hang the system. Typically on/after spin_lock_irqsave calls can be aborted. The cross call functionality must still exist to flush cache/TLBS. This patch provides CPU models a custom way to implement generation of IPIs on the generic code's request. The typical approach is to generate an IRQ for each IPI case. After this patch each sparc32 SMP CPU model needs to implement IPIs in order to function properly. Signed-off-by: Daniel Hellstrom <daniel@gaisler.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-17sparc32,leon: SMP power down implementationDaniel Hellstrom1-2/+10
Signed-off-by: Daniel Hellstrom <daniel@gaisler.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-17sparc32,leon: added some SMP commentsDaniel Hellstrom2-0/+14
Signed-off-by: Daniel Hellstrom <daniel@gaisler.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-13sparc: add {read,write}*_be routinesJan Andersson1-0/+13
This patch adds {read,write}*_be big endian memory access routines to the io.h header used on SPARC32 and SPARC64. Tested on SPARC32 (LEON) Signed-off-by: Jan Andersson <jan@gaisler.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-12sparc32: Fixed unaligned memory copying in function ↵Tkhai Kirill1-3/+9
__csum_partial_copy_sparc_generic When we are in the label cc_dword_align, registers %o0 and %o1 have the same last 2 bits, but it's not guaranteed one of them is zero. So we can get unaligned memory access in label ccte. Example of parameters which lead to this: %o0=0x7ff183e9, %o1=0x8e709e7d, %g1=3 With the parameters I had a memory corruption, when the additional 5 bytes were rewritten. This patch corrects the error. One comment to the patch. We don't care about the third bit in %o1, because cc_end_cruft stores word or less. Signed-off-by: Tkhai Kirill <tkhai@yandex.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-05net: Add sendmmsg socket system callAnton Blanchard3-4/+5
This patch adds a multiple message send syscall and is the send version of the existing recvmmsg syscall. This is heavily based on the patch by Arnaldo that added recvmmsg. I wrote a microbenchmark to test the performance gains of using this new syscall: http://ozlabs.org/~anton/junkcode/sendmmsg_test.c The test was run on a ppc64 box with a 10 Gbit network card. The benchmark can send both UDP and RAW ethernet packets. 64B UDP batch pkts/sec 1 804570 2 872800 (+ 8 %) 4 916556 (+14 %) 8 939712 (+17 %) 16 952688 (+18 %) 32 956448 (+19 %) 64 964800 (+20 %) 64B raw socket batch pkts/sec 1 1201449 2 1350028 (+12 %) 4 1461416 (+22 %) 8 1513080 (+26 %) 16 1541216 (+28 %) 32 1553440 (+29 %) 64 1557888 (+30 %) We see a 20% improvement in throughput on UDP send and 30% on raw socket send. [ Add sparc syscall entries. -DaveM ] Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-27Merge branch 'tip/perf/core' of ↵Ingo Molnar1-11/+14
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-2.6-trace into perf/core Conflicts: include/linux/perf_event.h Merge reason: pick up the latest jump-label enhancements, they are cooked ready. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-04-22sparc32,leon: don't rely on bootloader to mask IRQsDaniel Hellstrom2-0/+7
Signed-off-by: Daniel Hellstrom <daniel@gaisler.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-22sparc32,leon: operate on boot-cpu IRQ controller registersDaniel Hellstrom3-25/+21
* proper initialization of boot_cpu_id (no hardcoding to 0) * use boot_cpu_id index to address into the IRQ controller where appropriate Each CPU has a separate set of IRQ controller registers, this patch makes sure that the boot-cpu registers are used instead of CPU0's. Signed-off-by: Daniel Hellstrom <daniel@gaisler.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-22sparc32: always define boot_cpu_idDaniel Hellstrom5-14/+35
Define boot_cpu_id in single-processor kernels as well. This is to support architectures which can boot on other than CPU0. Sam Ravnborg has written the cleanup parts by extracting boot_cpu_id from smp_32.c into setup_32.c and cleaned up sun4d_irq.c. boot_cpu_id was initialized before BSS was cleared in sun4c_continue_boot, instead boot_cpu_id is set to 0xff to avoid BSS. If boot_cpu_id is untouched (0xff) by bootup code it will be overwritten to 0. boot_cpu_id4 is automatically calculated in common code. Signed-off-by: Daniel Hellstrom <daniel@gaisler.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-22sparc32: removed unused code, implemented by generic codeDaniel Hellstrom2-205/+0
Signed-off-by: Daniel Hellstrom <daniel@gaisler.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-22sparc32: fix sparcstation 5 bootSam Ravnborg1-3/+7
The sparcstation 5 I have available has no MID property for the CPU. This resulted in a panic when booting a SMP kernel on this box. The assigned field in cpu_data is never used, so if we fail to read the MID property then inform user and continue booting. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-22sparc32: avoid build warning at mm/percpu.c:1647Sam Ravnborg1-2/+4
Fix following warning: mm/percpu.c: In function 'pcpu_embed_first_chunk': mm/percpu.c:1647:3: warning: format '%lx' expects type 'long unsigned int', but argument 3 has type 'unsigned int' Signed-off-by: Daniel Hellstrom <daniel@gaisler.com> [sam: added warning message to changelog, use _AC()] Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-22sparc32: always register a PROM based early consoleSam Ravnborg3-8/+9
Do not require user to add "-p" to boot arguments to see early info printed to prom console. This is similar to the sparc64 functionality - which was added with: 3c62a2d3477ff7725210db57aec3d2806fa10c20 ("[SPARC64]: Always register a PROM based early console.") Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-22sparc32: probe for cpu info only during startupSam Ravnborg6-13/+8
We did a cpu_probe() call each time a CPU got online - which only effect was to save latest CPU/FPU info for use by show_cpuinfo(). Use same setup as for sparc64 where we probe for this info during startup, and only once. This allowed us to annotate a few functions __init which again fixed the following section mismatch warnings: WARNING: vmlinux.o(.text+0x65f0): Section mismatch in reference from the function set_cpu_and_fpu() to the (unknown reference) .init.rodata:(unknown) WARNING: vmlinux.o(.text+0x65f8): Section mismatch in reference from the function set_cpu_and_fpu() to the (unknown reference) .init.rodata:(unknown) WARNING: vmlinux.o(.text+0x664c): Section mismatch in reference from the function set_cpu_and_fpu() to the variable .init.rodata:manufacturer_info WARNING: vmlinux.o(.text+0x6650): Section mismatch in reference from the function set_cpu_and_fpu() to the variable .init.rodata:manufacturer_info Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-22sparc: consolidate show_cpuinfo in cpu.cSam Ravnborg8-157/+133
We have all the cpu related info in cpu.c - so move the remaining functions to support /proc/cpuinfo to this file. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-22sparc32: fix section mismatch warnings in apc, pmc and time_32Sam Ravnborg3-3/+3
In all cases there were a struct of_device_id variable defined __initdata. But it was referenced from struct platform_driver.of_match_table which is not guaranteed to be used during init only. So drop the __initdata annotation. This fixes following warnings: WARNING: arch/sparc/kernel/built-in.o(.data+0x810): Section mismatch in reference from the variable clock_driver to the variable .init.data:clock_match The variable clock_driver references the variable __initdata clock_match If the reference is valid then annotate the variable with __init* or __refdata (see linux/init.h) or name the variable: *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console WARNING: arch/sparc/kernel/built-in.o(.data+0xcec): Section mismatch in reference from the variable apc_driver to the variable .init.data:apc_match The variable apc_driver references the variable __initdata apc_match If the reference is valid then annotate the variable with __init* or __refdata (see linux/init.h) or name the variable: *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console WARNING: arch/sparc/kernel/built-in.o(.data+0xd60): Section mismatch in reference from the variable pmc_driver to the variable .init.data:pmc_match The variable pmc_driver references the variable __initdata pmc_match If the reference is valid then annotate the variable with __init* or __refdata (see linux/init.h) or name the variable: *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-22sparc32,leon: implement genirq CPU affinityDaniel Hellstrom1-10/+54
A simple implementation of CPU affinity, the first CPU in the affinity CPU mask always takes the IRQ. Signed-off-by: Daniel Hellstrom <daniel@gaisler.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-22sparc32, leon: code cleanup of timer/IRQ controller initializationDaniel Hellstrom1-84/+72
Cleaned up leon_init_timers() by removing unnecessary double checking and one indentation level. Changed LEON_IMASK to LEON_IMASK(cpu). Signed-off-by: Daniel Hellstrom <daniel@gaisler.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-22sparc32,leon: cleaned away code from the LEON2 daysDaniel Hellstrom2-24/+1
Signed-off-by: Daniel Hellstrom <daniel@gaisler.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-22sparc32,leon: per-cpu ticker use genirq per-cpu handlerDaniel Hellstrom4-51/+22
Signed-off-by: Daniel Hellstrom <daniel@gaisler.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-22sparc32,leon: add support for extended interrupt controllerDaniel Hellstrom2-28/+74
The extended IRQ controller gives the LEON 16 more IRQs. The patch installs a custom handler for the exetended controller IRQ, where a register is read and the "real" IRQ causing IRQ is determined. Signed-off-by: Daniel Hellstrom <daniel@gaisler.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-22sparc32, leon: must protect IRQ controller register with spinlockDaniel Hellstrom1-7/+7
The LEON interrupt controller has one single mask register for all IRQs per CPU, even though the genirq layer protects us from accessing the same IRQ at the same time other IRQs share the same mask register and may thus interfere. Some other IRQ controllers has a mask register or similar per IRQ instead which makes spinlocks unncessary. Signed-off-by: Daniel Hellstrom <daniel@gaisler.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-20sparc32: genirq supportSam Ravnborg14-935/+636
The conversion of sparc32 to genirq is based on original work done by David S. Miller. Daniel Hellstrom has helped in the conversion and implemented the shutdowm functionality. Marcel van Nies <morcles@gmail.com> has tested this on Sparc Station 20 Test status: sun4c - not tested sun4m,pci - not tested sun4m,sbus - tested (Sparc Classic, Sparc Station 5, Sparc Station 20) sun4d - not tested leon - tested on various combinations of leon boards, including SMP variants generic Introduce use of GENERIC_HARDIRQS and GENERIC_IRQ_SHOW Allocate 64 IRQs - which is enough even for SS2000 Use a table of irq_bucket to maintain uses IRQs irq_bucket is also used to chain several irq's that must be called when the same intrrupt is asserted Use irq_link to link a interrupt source to the irq All plafforms must now supply their own build_device_irq method handler_irq rewriten to use generic irq support floppy Read FLOPPY_IRQ from platform device Use generic request_irq to register the floppy interrupt Rewrote sparc_floppy_irq to use the generic irq support pcic: Introduce irq_chip Store mask in chip_data for use in mask/unmask functions Add build_device_irq for pcic Use pcic_build_device_irq in pci_time_init allocate virtual irqs in pcic_fill_irq sun4c: Introduce irq_chip Store mask in chip_data for use in mask/unmask functions Add build_device_irq for sun4c Use sun4c_build_device_irq in sun4c_init_timers sun4m: Introduce irq_chip Introduce dedicated mask/unmask methods Introduce sun4m_handler_data that allow easy access to necessary data in the mask/unmask functions Add a helper method to enable profile_timer (used from smp) Added sun4m_build_device_irq Use sun4m_build_device_irq in sun4m_init_timers TODO: There is no replacement for smp_rotate that always scheduled next CPU as interrupt target upon an interrupt sun4d: Introduce irq_chip Introduce dedicated mask/unmask methods Introduce sun4d_handler_data that allow easy access to necessary data in mask/unmask fuctions Rewrote sun4d_handler_irq to use generic irq support TODO: The original implmentation of enable/disable had: if (irq < NR_IRQS) return; The new implmentation does not distingush between SBUS and cpu interrupts. I am no sure what is right here. I assume we need to do something for the cpu interrupts. I have not succeeded booting my sun4d box (with or without this patch) and my understanding of this platfrom is limited. So I would be a bit suprised if this works. leon: Introduce irq_chip Store mask in chip_data for use in mask/unmask functions Add build_device_irq for leon Use leon_build_device_irq in leon_init_timers Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Daniel Hellstrom <daniel@gaisler.com> Tested-by: Daniel Hellstrom <daniel@gaisler.com> Tested-by: Marcel van Nies <morcles@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-20sparc32: cleanup code for pci initSam Ravnborg3-16/+15
Move the ifdeffery to a header file to make the logic more obvious where we decide between PCI or SBUS init Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-20sparc32,sun4d: rename sbus_tid to board_to_cpu in irq supportSam Ravnborg1-5/+9
The new name reflects the actual usage much better. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-18Merge branch 'sched/locking' into sched/coreIngo Molnar2-1/+4
Merge reason: the rq locking changes are stable, propagate them into the .40 queue. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-04-14sched: Provide scheduler_ipi() callback in response to smp_send_reschedule()Peter Zijlstra2-1/+4
For future rework of try_to_wake_up() we'd like to push part of that function onto the CPU the task is actually going to run on. In order to do so we need a generic callback from the existing scheduler IPI. This patch introduces such a generic callback: scheduler_ipi() and implements it as a NOP. BenH notes: PowerPC might use this IPI on offline CPUs under rare conditions! Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Acked-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Reviewed-by: Frank Rowand <frank.rowand@am.sony.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20110405152728.744338123@chello.nl
2011-04-12sched, sparc64: Turn cpu_coregroup_mask() into a real functionStephen Rothwell1-1/+5
This compile error triggers on Sparc64: kernel/sched.c:7140: error: 'cpu_coregroup_mask' undeclared here (not in a function) Because after the recent scheduler domain cleanups the scheduler uses this arch method as a function pointer in a scheduler topology data structure - which is not possible with a macro. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: David S. Miller <davem@davemloft.net> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20110412140040.3020ef55.sfr@canb.auug.org.au Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-04-07Merge branch 'for-linus2' of git://git.profusion.mobi/users/lucas/linux-2.6Linus Torvalds10-20/+20
* 'for-linus2' of git://git.profusion.mobi/users/lucas/linux-2.6: Fix common misspellings
2011-04-04jump label: Introduce static_branch() interfaceJason Baron1-11/+14
Introduce: static __always_inline bool static_branch(struct jump_label_key *key); instead of the old JUMP_LABEL(key, label) macro. In this way, jump labels become really easy to use: Define: struct jump_label_key jump_key; Can be used as: if (static_branch(&jump_key)) do unlikely code enable/disale via: jump_label_inc(&jump_key); jump_label_dec(&jump_key); that's it! For the jump labels disabled case, the static_branch() becomes an atomic_read(), and jump_label_inc()/dec() are simply atomic_inc(), atomic_dec() operations. We show testing results for this change below. Thanks to H. Peter Anvin for suggesting the 'static_branch()' construct. Since we now require a 'struct jump_label_key *key', we can store a pointer into the jump table addresses. In this way, we can enable/disable jump labels, in basically constant time. This change allows us to completely remove the previous hashtable scheme. Thanks to Peter Zijlstra for this re-write. Testing: I ran a series of 'tbench 20' runs 5 times (with reboots) for 3 configurations, where tracepoints were disabled. jump label configured in avg: 815.6 jump label *not* configured in (using atomic reads) avg: 800.1 jump label *not* configured in (regular reads) avg: 803.4 Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <20110316212947.GA8792@redhat.com> Signed-off-by: Jason Baron <jbaron@redhat.com> Suggested-by: H. Peter Anvin <hpa@linux.intel.com> Tested-by: David Daney <ddaney@caviumnetworks.com> Acked-by: Ralf Baechle <ralf@linux-mips.org> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-04-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6Linus Torvalds15-17/+20
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6: sparc32: Pass task_struct to schedule_tail() in ret_from_fork apbuart: Depend upon sparc. sparc64: Fix section mis-match errors. sparc32,leon: Fixed APBUART frequency detection sparc32, leon: APBUART driver must use archdata to get IRQ number sparc: Hook up syncfs system call.
2011-03-31Fix common misspellingsLucas De Marchi10-20/+20
Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-31sparc32: Pass task_struct to schedule_tail() in ret_from_forkTkhai Kirill1-1/+1
We have to pass task_struct of previous process to function schedule_tail(). Currently in ret_from_fork previous thread_info is passed: switch_to: mov %g6, %g3 /* previous thread_info in g6 */ ret_from_fork: call schedule_tail mov %g3, %o0 /* previous thread_info is passed */ void schedule_tail(struct task_struct *prev); Signed-off-by: Tkhai Kirill <tkhai@yandex.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-31sparc64: Fix section mis-match errors.David S. Miller11-14/+14
Fix all of the problems spotted by CONFIG_DEBUG_SECTION_MISMATCH under arch/sparc during a 64-bit defconfig build. They fall into two categorites: 1) of_device_id is marked as __initdata, and we can never do this since these objects sit in the device core data structures way past boot. So even if a driver will never be reloaded, we have to keep the device ID table around. Mark such cases const instead. 2) The bootmem alloc/free handling code in mdesc.c was not fully marked __init as it should be, thus generating a reference to free_bootmem_late() (which is __init) from non-__init code. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-30genirq: Remove the now obsolete config options and select statementsThomas Gleixner1-1/+0
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-03-30sparc: Hook up syncfs system call.David S. Miller3-2/+5
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-29sparc: Use generic show_interrupts()Thomas Gleixner2-39/+7
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: sparclinux@vger.kernel.org
2011-03-29sparc: Convert to new irq function namesThomas Gleixner3-20/+16
Scripted with coccinelle. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: sparclinux@vger.kernel.org
2011-03-29sparc: Cleanup direct irq_desc accessThomas Gleixner2-17/+10
Use the proper wrapper functions. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: sparclinux@vger.kernel.org
2011-03-29sparc: Use the new genirq functionalityThomas Gleixner2-24/+9
Make use of the new features in genirq: 1) Set the chip flag IRCHIP_EOI_IF_HANDLED, which ensures in the core code that irq_eoi() is only called when the interrupt was handled. That removes the extra status check in the callback. 2) Use the preflow handler, which is called from the fasteoi core code before the device handler. That avoids another status check and the open coded handler redirection. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: sparclinux@vger.kernel.org
2011-03-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6Linus Torvalds1-0/+4
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6: sparc32: Fix multiple RTC detections on SUN4D
2011-03-25lib, arch: add filter argument to show_mem and fix private implementationsDavid Rientjes1-1/+1
Commit ddd588b5dd55 ("oom: suppress nodes that are not allowed from meminfo on oom kill") moved lib/show_mem.o out of lib/lib.a, which resulted in build warnings on all architectures that implement their own versions of show_mem(): lib/lib.a(show_mem.o): In function `show_mem': show_mem.c:(.text+0x1f4): multiple definition of `show_mem' arch/sparc/mm/built-in.o:(.text+0xd70): first defined here The fix is to remove __show_mem() and add its argument to show_mem() in all implementations to prevent this breakage. Architectures that implement their own show_mem() actually don't do anything with the argument yet, but they could be made to filter nodes that aren't allowed in the current context in the future just like the generic implementation. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Reported-by: James Bottomley <James.Bottomley@hansenpartnership.com> Suggested-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David Rientjes <rientjes@google.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-25sparc32: Fix multiple RTC detections on SUN4DKjetil Oftedal1-0/+4
During the preparation for testing the recent changes made to the SUN4D specific code in the kernel by Sam Ravnborg the following was discovered: Since the removal of of_platform_bus_type (commit: eca3930163ba8884060ce9d9ff5ef0d9b7c7b00f ) multiboard SUN4Ds have not been able to boot. The kernel crashes due to a zero-pointer error encountered when registering multiple M48T59 RTCs (There is one on each board). A patch for the was previously submitted, but the problem was not a serious at that time, as it would only generate warnings. Now the kernel will crash and stop executing before the serial console has been started. (Crash output can be viewed by using the -p boot flag) Signed-off-by: Kjetil Oftedal <oftedal@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2025-10-02 20:39:20 +0300