summaryrefslogtreecommitdiff
path: root/arch/sh/boards/mach-ecovec24/setup.c
AgeCommit message (Collapse)AuthorFilesLines
2010-05-22sh: add Video Output Unit and AK8813 video encoder support on ecovecGuennadi Liakhovetski1-0/+78
Ecovec uses the AK8813 video envoder similarly to the ms7724se platform with the only difference, that on ecovec GPIOs are used for resetting and powering up and down the chip. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-05-13sh: Check return value of clk_get on ecovec24Kuninori Morimoto1-9/+15
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-05-13sh: switch boards to clkdevMagnus Damm1-2/+0
This patch converts the remaining board clocks to use clkdev for lookup if needed. The unused name and id from struct clk are also removed. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-03-23sh: mach-ecovec24: Add i2c_put_adapter on sh_eth_initKuninori Morimoto1-0/+2
i2c_put_adapter is needed after i2c_get_adapter Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-26sh: ecovec build fix for CONFIG_I2C=nMagnus Damm1-0/+7
Allow building the ecovec board support code even though I2C support is disabled. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-26sh: ecovec r-standby supportMagnus Damm1-1/+2
This patch adds board specific r-standby resume code for ecovec. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-25sh: mach-ecovec24: Add sh_sir supportKuninori Morimoto1-0/+27
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-22sh: sh7724: Update FSI/SPU2 clockKuninori Morimoto1-0/+5
When FSI and Network (= NFS file system) were used at the same time, the I/O of FSI was unstable. This patch updates the SPU2 clock (which is used for FSI) to solve this issue. Special thanks to Jeremy. Signed-off-by: Jeremy Baker <Jeremy.Baker@renesas.com> Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-22sh: always enable sh7724 vpu_clk and set to 166MHz on EcovecMagnus Damm1-0/+5
Update the sh7724 processor code to always enable vpu_clk. On the Ecovec board, set the vpu_clk to 166 Mhz. The 166MHz setting results in a divide-by-6 setup for vpu_clk and improves the VPU performance compared to the power-on-reset/bootloader configuration. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-09sh: sh7724/Ecovec24/KFR2R09/MS7724SE SDHI vector mergeMagnus Damm1-2/+2
Merge the SDHI vectors in the sh7724 INTC table and update the SDHI platform data for Ecovec24, KFR2R09 and MS7724SE. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-01-26sh: Mass ctrl_in/outX to __raw_read/writeX conversion.Paul Mundt1-10/+10
The old ctrl in/out routines are non-portable and unsuitable for cross-platform use. While drivers/sh has already been sanitized, there is still quite a lot of code that is not. This converts the arch/sh/ bits over, which permits us to flag the routines as deprecated whilst still building with -Werror for the architecture code, and to ensure that future users are not added. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-01-18Merge branch 'sh/stable-updates'Paul Mundt1-0/+8
2010-01-15sh: heartbeat: Update boards for access size hinting.Paul Mundt1-9/+7
This updates the existing boards that specify the register width through platform data to use the resource flags instead. This eliminates platform data completely in most cases, and permits further improvement in the heartbeat driver as well as shrinking the overall private data size. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-01-15sh: mach-ecovec24: Add motion sensor driver support.NISHIMOTO Hiroki1-0/+8
This patch adds support for the lis3lv02d motion sensor connected via i2c on the Ecovec board. Tested with evtest. Signed-off-by: NISHIMOTO Hiroki <nishimoto.hiroki@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-12-24sh: mach-ecovec24: setup.c detailed correctionKuninori Morimoto1-2/+2
o remove unused define o add device name comment Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-12-15sh: mach-ecovec24: Add FSI sound supportKuninori Morimoto1-0/+98
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-12-15sh: mach-ecovec24: Add mt9t112 camera supportKuninori Morimoto1-1/+78
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-12-15sh: mach-ecovec24: Add tw9910 supportKuninori Morimoto1-0/+50
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-12-15sh: MSIOF/mmc_spi platform data for the Ecovec24 boardMagnus Damm1-2/+95
This patch adds MSIOF and mmc_spi platform data for the CN11 port on the SuperH Ecovec24 board. No card detect interrupt is available so the MMC code is configured to poll. The WP signal is implemented together with CD and power control. The board only supports 3.3V power. The platform data is wrapped in SDHI #ifdefs to allow both the SDHI and the MSIOF to coexist. Only one configuration is allowed at a time. The pin routing is selected by a dip switch but we can unfortunately not detect this setting at run time. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-12-04sh: mach-ecovec24: LCDC drive ability become highKuninori Morimoto1-2/+2
Drive ability for LCDC become high for safety, became there is strange individual specificity board in mass production Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-11-30sh: Move KEYSC header fileMagnus Damm1-1/+1
This patch moves the KEYSC header file from the SuperH specific asm directory to a place where it can be shared by multiple architectures. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-11-30sh: Add SDHI power control support to EcovecMagnus Damm1-6/+30
This patch adds support for SDHI power control to the Ecovec board. Platform data and power control callbacks for SDHI0 and SDHI1 are added. Power is by default off. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-30sh: Add Ecovec24 specific memory pre/post sleep codeMagnus Damm1-0/+14
Add self-refresh handling code for the Ecovec24 board. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-28sh: mach-ecovec24: Add USB1 gadget supportKuninori Morimoto1-21/+17
USB1 can change to host/function by checking PTB3. This patch add USB1 gadget support and check PTB3 when boot, and change name to usb1_common_XXX from usb1_host_XXX. Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-26sh: mac address through private data for sh_eth on ecovec24Magnus Damm1-29/+4
Convert the ecovec24 board code to pass the mac address to the sh_eth driver using platform data. Also, remove the static clock to allow Runtime PM. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-26sh: add hwblk_id to sh_eth on ecovec24Magnus Damm1-0/+3
Add HWBLK_ETHER to the sh_eth platform device to allow Runtime PM of the ethernet hardware. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-26Merge branch 'sh/sdhi-mfd'Paul Mundt1-1/+78
Conflicts: arch/sh/boards/mach-ecovec24/setup.c arch/sh/boards/mach-kfr2r09/setup.c
2009-10-26sh: mach-ecevec24: Add SDHI supportKuninori Morimoto1-0/+78
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-09sh: enable sleep state LEDs on Ecovec24Magnus Damm1-0/+5
Extend the ecovec24 board code to enable Power Management LEDs showing the current sh7724 sleep state. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-05sh: mach-ecovec24: Document DS2 switch settings.Kuninori Morimoto1-0/+14
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-09-30sh: mach-ecovec24: modify 1st MTD area to read onlyKuninori Morimoto1-1/+1
Tested-by: Yusuke Goda <goda.yusuke@renesas.com> Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-09-30sh: mach-ecovec24: Add TouchScreen supportKuninori Morimoto1-0/+42
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-09-24sh: mach-ecovec24: Add active low setting for sh_ethKuninori Morimoto1-0/+1
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-09-17sh: mach-ecovec24: Add user debug switch supportKuninori Morimoto1-0/+10
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-09-15video: sh_mobile_lcdcfb: use both register sets for display panningPhil Edworthy1-1/+1
Switch to using both register sets - side A and side B for display panning. Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-09-15sh: mach-ecovec24: need asm/clock.h.Kuninori Morimoto1-0/+1
Fixes up build failures. Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-09-15sh: mach-ecovec24: deassert usb irq on boot.Kuninori Morimoto1-0/+1
This patch prevents the USB1 interrupt from remaining asserted immediately after re-boot or during a jump in to a secondary kernel. Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-09-15sh: Add KEYSC support for EcoVec24Kuninori Morimoto1-0/+52
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-09-11sh: EcoVec24: add HIZA setting for LEDKuninori Morimoto1-0/+1
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-09-11sh: EcoVec24: write MAC address in bootKuninori Morimoto1-2/+79
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-09-11sh: Add romImage support for EcoVec24Kuninori Morimoto1-0/+1
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-09-11sh: Add I2C device support for EcoVec24Kuninori Morimoto1-1/+12
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-27sh: Add LCDC Panel support for EcoVec24Kuninori Morimoto1-2/+28
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-27sh: Add CEU support for EcoVec24Kuninori Morimoto1-0/+109
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-27sh: Add support LCDC for EcoVec24Kuninori Morimoto1-0/+109
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-27sh: Add USB support for EcoVec24Kuninori Morimoto1-0/+97
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-27sh: Add SH-ETH support for EcoVec24Kuninori Morimoto1-1/+52
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-27sh: modify to enable boot for EcoVec24Kuninori Morimoto1-19/+14
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-20sh: Add EcoVec (SH7724) board supportKuninori Morimoto1-0/+129
This adds preliminary support for the EcoVec board. Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-26 13:01:44 +0300