summaryrefslogtreecommitdiff
path: root/arch/s390/pci/pci_irq.c
AgeCommit message (Collapse)AuthorFilesLines
2022-03-10s390/pci: make zpci_set_irq()/zpci_clear_irq() staticNiklas Schnelle1-2/+2
Commit c1e18c17bda68 ("s390/pci: add zpci_set_irq()/zpci_clear_irq()") made zpci_set_irq()/zpci_clear_irq() non-static in preparation for using them in zpci_hot_reset_device(). The version of zpci_hot_reset_device() that was finally merged however exploits the fact that IRQs and DMA is implicitly disabled by clp_disable_fh() so the call to zpci_clear_irq() was never added. There are no other calls outside pci_irq.c so lets make both functions static. Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-01-13Merge tag 'irq-msi-2022-01-13' of ↵Linus Torvalds1-6/+4
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull MSI irq updates from Thomas Gleixner: "Rework of the MSI interrupt infrastructure. This is a treewide cleanup and consolidation of MSI interrupt handling in preparation for further changes in this area which are necessary to: - address existing shortcomings in the VFIO area - support the upcoming Interrupt Message Store functionality which decouples the message store from the PCI config/MMIO space" * tag 'irq-msi-2022-01-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (94 commits) genirq/msi: Populate sysfs entry only once PCI/MSI: Unbreak pci_irq_get_affinity() genirq/msi: Convert storage to xarray genirq/msi: Simplify sysfs handling genirq/msi: Add abuse prevention comment to msi header genirq/msi: Mop up old interfaces genirq/msi: Convert to new functions genirq/msi: Make interrupt allocation less convoluted platform-msi: Simplify platform device MSI code platform-msi: Let core code handle MSI descriptors bus: fsl-mc-msi: Simplify MSI descriptor handling soc: ti: ti_sci_inta_msi: Remove ti_sci_inta_msi_domain_free_irqs() soc: ti: ti_sci_inta_msi: Rework MSI descriptor allocation NTB/msi: Convert to msi_on_each_desc() PCI: hv: Rework MSI handling powerpc/mpic_u3msi: Use msi_for_each-desc() powerpc/fsl_msi: Use msi_for_each_desc() powerpc/pasemi/msi: Convert to msi_on_each_dec() powerpc/cell/axon_msi: Convert to msi_on_each_desc() powerpc/4xx/hsta: Rework MSI handling ...
2021-12-17s390/pci: Rework MSI descriptor walkThomas Gleixner1-4/+2
Replace the about to vanish iterators and make use of the filtering. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Niklas Schnelle <schnelle@linux.ibm.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Acked-by: Niklas Schnelle <schnelle@linux.ibm.com> Link: https://lore.kernel.org/r/20211206210748.305656158@linutronix.de
2021-12-09PCI/MSI: Make arch_restore_msi_irqs() less horrible.Thomas Gleixner1-2/+2
Make arch_restore_msi_irqs() return a boolean which indicates whether the core code should restore the MSI message or not. Get rid of the indirection in x86. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Juergen Gross <jgross@suse.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> # PCI Link: https://lore.kernel.org/r/20211206210224.485668098@linutronix.de
2021-12-06s390/pci: use phys_to_virt() for AIBVs/DIBVsNiklas Schnelle1-3/+3
The adapter and directed interrupt bit vectors need to be referenced in the FIB with their physical not their virtual address. So use virt_to_phys() as approrpiate. Note: this currently doesn't fix a real bug, since virtual addresses are indentical to physical ones. Reviewed-by: Pierre Morel <pmorel@linux.ibm.com> Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-11-08s390/pci: implement reset_slot for hotplug slotNiklas Schnelle1-0/+9
This is done by adding a zpci_hot_reset_device() call which does a low level reset of the PCI function without changing its higher level function state. This way it can be used while the zPCI function is bound to a driver and with DMA tables being controlled either through the IOMMU or DMA APIs which is prohibited when using zpci_disable_device() as that drop existing DMA translations. As this reset, unlike a normal FLR, also calls zpci_clear_irq() we need to implement arch_restore_msi_irqs() and make sure we re-enable IRQs for the PCI function if they were previously disabled. Reviewed-by: Pierre Morel <pmorel@linux.ibm.com> Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com> Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-08-10s390/pci: Do not mask MSI[-X] entries on teardownThomas Gleixner1-4/+0
The PCI core already ensures that the MSI[-X] state is correct when MSI[-X] is disabled. For MSI the reset state is all entries unmasked and for MSI-X all vectors are masked. S390 masks all MSI entries and masks the already masked MSI-X entries again. Remove it and let the device in the correct state. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Niklas Schnelle <schnelle@linux.ibm.com> Tested-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Marc Zyngier <maz@kernel.org> Acked-by: Niklas Schnelle <schnelle@linux.ibm.com> Link: https://lore.kernel.org/r/20210729222542.939798136@linutronix.de
2021-06-28s390/pci: add zpci_set_irq()/zpci_clear_irq()Niklas Schnelle1-10/+36
Pull the directed vs floating IRQ check into common zpci_set_irq()/zpci_clear_irq() functions and expose them for the rest of the zPCI subsystem. Furthermore we add a zdev flag bit to easily check if IRQs are registered. This is needed for use in resetting a zPCI function. Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com> Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-12-15Merge tag 'sched-core-2020-12-14' of ↵Linus Torvalds1-3/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler updates from Thomas Gleixner: - migrate_disable/enable() support which originates from the RT tree and is now a prerequisite for the new preemptible kmap_local() API which aims to replace kmap_atomic(). - A fair amount of topology and NUMA related improvements - Improvements for the frequency invariant calculations - Enhanced robustness for the global CPU priority tracking and decision making - The usual small fixes and enhancements all over the place * tag 'sched-core-2020-12-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (61 commits) sched/fair: Trivial correction of the newidle_balance() comment sched/fair: Clear SMT siblings after determining the core is not idle sched: Fix kernel-doc markup x86: Print ratio freq_max/freq_base used in frequency invariance calculations x86, sched: Use midpoint of max_boost and max_P for frequency invariance on AMD EPYC x86, sched: Calculate frequency invariance for AMD systems irq_work: Optimize irq_work_single() smp: Cleanup smp_call_function*() irq_work: Cleanup sched: Limit the amount of NUMA imbalance that can exist at fork time sched/numa: Allow a floating imbalance between NUMA nodes sched: Avoid unnecessary calculation of load imbalance at clone time sched/numa: Rename nr_running and break out the magic number sched: Make migrate_disable/enable() independent of RT sched/topology: Condition EAS enablement on FIE support arm64: Rebuild sched domains on invariance status changes sched/topology,schedutil: Wrap sched domains rebuild sched/uclamp: Allow to reset a task uclamp constraint value sched/core: Fix typos in comments Documentation: scheduler: fix information on arch SD flags, sched_domain and sched_debug ...
2020-12-02s390/pci: fix CPU address in MSI for directed IRQAlexander Gordeev1-3/+11
The directed MSIs are delivered to CPUs whose address is written to the MSI message address. The current code assumes that a CPU logical number (as it is seen by the kernel) is also the CPU address. The above assumption is not correct, as the CPU address is rather the value returned by STAP instruction. That value does not necessarily match the kernel logical CPU number. Fixes: e979ce7bced2 ("s390/pci: provide support for CPU directed interrupts") Cc: <stable@vger.kernel.org> # v5.2+ Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com> Reviewed-by: Halil Pasic <pasic@linux.ibm.com> Reviewed-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-11-24smp: Cleanup smp_call_function*()Peter Zijlstra1-3/+1
Get rid of the __call_single_node union and cleanup the API a little to avoid external code relying on the structure layout as much. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
2020-04-22s390/pci: do not set affinity for floating irqsNiklas Schnelle1-2/+3
with the introduction of CPU directed interrupts the kernel parameter pci=force_floating was introduced to fall back to the previous behavior using floating irqs. However we were still setting the affinity in that case, both in __irq_alloc_descs() and via the irq_set_affinity callback in struct irq_chip. For the former only set the affinity in the directed case. The latter is explicitly set in zpci_directed_irq_init() so we can just leave it unset for the floating case. Fixes: e979ce7bced2 ("s390/pci: provide support for CPU directed interrupts") Co-developed-by: Alexander Schmidt <alexs@linux.ibm.com> Signed-off-by: Alexander Schmidt <alexs@linux.ibm.com> Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2019-09-16s390/pci: fix MSI message dataSebastian Ott1-1/+1
After recent changes the MSI message data needs to specify the function-relative IRQ number. Reported-and-tested-by: Alexander Schmidt <alexs@linux.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2019-04-29s390/pci: add parameter to force floating irqsSebastian Ott1-0/+3
Provide a kernel parameter to force the usage of floating interrupts. Signed-off-by: Sebastian Ott <sebott@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2019-04-29s390/pci: gather statistics for floating vs directed irqsSebastian Ott1-4/+6
Gather statistics to distinguish floating and directed interrupts. Signed-off-by: Sebastian Ott <sebott@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2019-04-29s390: show statistics for MSI IRQsSebastian Ott1-1/+1
Improve /proc/interrupts on s390 to show statistics for individual MSI interrupts. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2019-04-29s390/pci: provide support for CPU directed interruptsSebastian Ott1-47/+292
Up until now all interrupts on s390 have been floating. For MSI interrupts we've used a global summary bit vector (with a bit for each function) and a per-function interrupt bit vector (with a bit per MSI). This patch introduces a new IRQ delivery mode: CPU directed interrupts. In this new mode a per-CPU interrupt bit vector is used (with a bit per MSI per function). Further it is now possible to direct an IRQ to a specific CPU so we can finally support IRQ affinity. If an interrupt can't be delivered because the appointed CPU is occupied by a hypervisor the interrupt is delivered floating. For this a global summary bit vector is used (with a bit per CPU). Signed-off-by: Sebastian Ott <sebott@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2019-04-29s390/pci: clarify interrupt vector usageSebastian Ott1-12/+26
Rename and clarify the usage of the interrupt bit vectors. Also change the array of the per-function bit vectors to be dynamically allocated. Signed-off-by: Sebastian Ott <sebott@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2019-04-29s390/airq: recognize directed interruptsSebastian Ott1-1/+1
Add an extra parameter for airq handlers to recognize floating vs. directed interrupts. Signed-off-by: Sebastian Ott <sebott@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2019-04-29s390/pci: move everything irq related to pci_irq.cSebastian Ott1-0/+222
Move everything interrupt related from pci.c to pci_irq.c. No functional change. Signed-off-by: Sebastian Ott <sebott@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-19 13:37:48 +0300