| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Since all architectures (for historical reasons) have to define
struct kvm_guest_debug_arch, and since userspace has to check
KVM_CHECK_EXTENSION(KVM_CAP_SET_GUEST_DEBUG) anyway, there is
no advantage in masking the capability #define itself. Remove
the #define __KVM_HAVE_GUEST_DEBUG from architecture-specific
headers.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
While this in principle breaks the appearance of KVM_S390_* ioctls on architectures
other than s390, this seems unlikely to be a problem considering that there are
already many "struct kvm_s390_*" definitions in arch/s390/include/uapi.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Pull kvm updates from Paolo Bonzini:
"ARM:
- Clean up vCPU targets, always returning generic v8 as the preferred
target
- Trap forwarding infrastructure for nested virtualization (used for
traps that are taken from an L2 guest and are needed by the L1
hypervisor)
- FEAT_TLBIRANGE support to only invalidate specific ranges of
addresses when collapsing a table PTE to a block PTE. This avoids
that the guest refills the TLBs again for addresses that aren't
covered by the table PTE.
- Fix vPMU issues related to handling of PMUver.
- Don't unnecessary align non-stack allocations in the EL2 VA space
- Drop HCR_VIRT_EXCP_MASK, which was never used...
- Don't use smp_processor_id() in kvm_arch_vcpu_load(), but the cpu
parameter instead
- Drop redundant call to kvm_set_pfn_accessed() in user_mem_abort()
- Remove prototypes without implementations
RISC-V:
- Zba, Zbs, Zicntr, Zicsr, Zifencei, and Zihpm support for guest
- Added ONE_REG interface for SATP mode
- Added ONE_REG interface to enable/disable multiple ISA extensions
- Improved error codes returned by ONE_REG interfaces
- Added KVM_GET_REG_LIST ioctl() implementation for KVM RISC-V
- Added get-reg-list selftest for KVM RISC-V
s390:
- PV crypto passthrough enablement (Tony, Steffen, Viktor, Janosch)
Allows a PV guest to use crypto cards. Card access is governed by
the firmware and once a crypto queue is "bound" to a PV VM every
other entity (PV or not) looses access until it is not bound
anymore. Enablement is done via flags when creating the PV VM.
- Guest debug fixes (Ilya)
x86:
- Clean up KVM's handling of Intel architectural events
- Intel bugfixes
- Add support for SEV-ES DebugSwap, allowing SEV-ES guests to use
debug registers and generate/handle #DBs
- Clean up LBR virtualization code
- Fix a bug where KVM fails to set the target pCPU during an IRTE
update
- Fix fatal bugs in SEV-ES intrahost migration
- Fix a bug where the recent (architecturally correct) change to
reinject #BP and skip INT3 broke SEV guests (can't decode INT3 to
skip it)
- Retry APIC map recalculation if a vCPU is added/enabled
- Overhaul emergency reboot code to bring SVM up to par with VMX, tie
the "emergency disabling" behavior to KVM actually being loaded,
and move all of the logic within KVM
- Fix user triggerable WARNs in SVM where KVM incorrectly assumes the
TSC ratio MSR cannot diverge from the default when TSC scaling is
disabled up related code
- Add a framework to allow "caching" feature flags so that KVM can
check if the guest can use a feature without needing to search
guest CPUID
- Rip out the ancient MMU_DEBUG crud and replace the useful bits with
CONFIG_KVM_PROVE_MMU
- Fix KVM's handling of !visible guest roots to avoid premature
triple fault injection
- Overhaul KVM's page-track APIs, and KVMGT's usage, to reduce the
API surface that is needed by external users (currently only
KVMGT), and fix a variety of issues in the process
Generic:
- Wrap kvm_{gfn,hva}_range.pte in a union to allow mmu_notifier
events to pass action specific data without needing to constantly
update the main handlers.
- Drop unused function declarations
Selftests:
- Add testcases to x86's sync_regs_test for detecting KVM TOCTOU bugs
- Add support for printf() in guest code and covert all guest asserts
to use printf-based reporting
- Clean up the PMU event filter test and add new testcases
- Include x86 selftests in the KVM x86 MAINTAINERS entry"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (279 commits)
KVM: x86/mmu: Include mmu.h in spte.h
KVM: x86/mmu: Use dummy root, backed by zero page, for !visible guest roots
KVM: x86/mmu: Disallow guest from using !visible slots for page tables
KVM: x86/mmu: Harden TDP MMU iteration against root w/o shadow page
KVM: x86/mmu: Harden new PGD against roots without shadow pages
KVM: x86/mmu: Add helper to convert root hpa to shadow page
drm/i915/gvt: Drop final dependencies on KVM internal details
KVM: x86/mmu: Handle KVM bookkeeping in page-track APIs, not callers
KVM: x86/mmu: Drop @slot param from exported/external page-track APIs
KVM: x86/mmu: Bug the VM if write-tracking is used but not enabled
KVM: x86/mmu: Assert that correct locks are held for page write-tracking
KVM: x86/mmu: Rename page-track APIs to reflect the new reality
KVM: x86/mmu: Drop infrastructure for multiple page-track modes
KVM: x86/mmu: Use page-track notifiers iff there are external users
KVM: x86/mmu: Move KVM-only page-track declarations to internal header
KVM: x86: Remove the unused page-track hook track_flush_slot()
drm/i915/gvt: switch from ->track_flush_slot() to ->track_remove_region()
KVM: x86: Add a new page-track hook to handle memslot deletion
drm/i915/gvt: Don't bother removing write-protection on to-be-deleted slot
KVM: x86: Reject memslot MOVE operations if KVMGT is attached
...
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD
- PV crypto passthrough enablement (Tony, Steffen, Viktor, Janosch)
Allows a PV guest to use crypto cards. Card access is governed by
the firmware and once a crypto queue is "bound" to a PV VM every
other entity (PV or not) looses access until it is not bound
anymore. Enablement is done via flags when creating the PV VM.
- Guest debug fixes (Ilya)
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Heiko Carstens:
- Add vfio-ap support to pass-through crypto devices to secure
execution guests
- Add API ordinal 6 support to zcrypt_ep11misc device drive, which is
required to handle key generate and key derive (e.g. secure key to
protected key) correctly
- Add missing secure/has_secure sysfs files for the case where it is
not possible to figure where a system has been booted from. Existing
user space relies on that these files are always present
- Fix DCSS block device driver list corruption, caused by incorrect
error handling
- Convert virt_to_pfn() and pfn_to_virt() from defines to static inline
functions to enforce type checking
- Cleanups, improvements, and minor fixes to the kernel mapping setup
- Fix various virtual vs physical address confusions
- Move pfault code to separate file, since it has nothing to do with
regular fault handling
- Move s390 documentation to Documentation/arch/ like it has been done
for other architectures already
- Add HAVE_FUNCTION_GRAPH_RETVAL support
- Factor out the s390_hypfs filesystem and add a new config option for
it. The filesystem is deprecated and as soon as all users are gone it
can be removed some time in the not so near future
- Remove support for old CEX2 and CEX3 crypto cards from zcrypt device
driver
- Add support for user-defined certificates: receive user-defined
certificates with a diagnose call and provide them via 'cert_store'
keyring to user space
- Couple of other small fixes and improvements all over the place
* tag 's390-6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (66 commits)
s390/pci: use builtin_misc_device macro to simplify the code
s390/vfio-ap: make sure nib is shared
KVM: s390: export kvm_s390_pv*_is_protected functions
s390/uv: export uv_pin_shared for direct usage
s390/vfio-ap: check for TAPQ response codes 0x35 and 0x36
s390/vfio-ap: handle queue state change in progress on reset
s390/vfio-ap: use work struct to verify queue reset
s390/vfio-ap: store entire AP queue status word with the queue object
s390/vfio-ap: remove upper limit on wait for queue reset to complete
s390/vfio-ap: allow deconfigured queue to be passed through to a guest
s390/vfio-ap: wait for response code 05 to clear on queue reset
s390/vfio-ap: clean up irq resources if possible
s390/vfio-ap: no need to check the 'E' and 'I' bits in APQSW after TAPQ
s390/ipl: refactor deprecated strncpy
s390/ipl: fix virtual vs physical address confusion
s390/zcrypt_ep11misc: support API ordinal 6 with empty pin-blob
s390/paes: fix PKEY_TYPE_EP11_AES handling for secure keyblobs
s390/pkey: fix PKEY_TYPE_EP11_AES handling for sysfs attributes
s390/pkey: fix PKEY_TYPE_EP11_AES handling in PKEY_VERIFYKEY2 IOCTL
s390/pkey: fix PKEY_TYPE_EP11_AES handling in PKEY_KBLOB2PROTK[23]
...
|
|
Add a uv_feature list for pv-guests to the KVM cpu-model.
The feature bits 'AP-interpretation for secure guests' and
'AP-interrupt for secure guests' are available.
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Michael Mueller <mimu@linux.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Link: https://lore.kernel.org/r/20230815151415.379760-4-seiden@linux.ibm.com
Message-Id: <20230815151415.379760-4-seiden@linux.ibm.com>
|
|
Commit 'fa6999e326fe ("s390/pkey: support CCA and EP11 secure ECC
private keys")' introduced a new PKEY_TYPE_EP11_AES securekey type as
a supplement to the existing PKEY_TYPE_EP11 (which won't work in
environments with session-bound keys). The pkey EP11 securekey
attributes use PKEY_TYPE_EP11_AES (instead of PKEY_TYPE_EP11)
keyblobs, to make the generated keyblobs usable also in environments,
where session-bound keys are required.
There should be no negative impacts to userspace because the internal
structure of the keyblobs is opaque. The increased size of the
generated keyblobs is reflected by the changed size of the attributes.
Fixes: fa6999e326fe ("s390/pkey: support CCA and EP11 secure ECC private keys")
Signed-off-by: Holger Dengler <dengler@linux.ibm.com>
Reviewed-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Adrian Reber reported the following CRIU build bug after
commit b8af5999779d ("s390/ptrace: make all psw related
defines also available for asm"):
compel/arch/s390/src/lib/infect.c: In function 'arch_can_dump_task':
compel/arch/s390/src/lib/infect.c:523:25: error: 'UL' undeclared (first use in this function)
523 | if (psw->mask & PSW_MASK_RI) {
| ^~~~~~~~~~~
Add the missing linux/const.h include to fix this.
Reported-by: Adrian Reber <areber@redhat.com>
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=2225745
Link: https://github.com/checkpoint-restore/criu/pull/2232
Tested-by: Adrian Reber <areber@redhat.com>
Fixes: b8af5999779d ("s390/ptrace: make all psw related defines also available for asm")
Link: https://lore.kernel.org/r/20230731183926.330932-1-hca@linux.ibm.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull more s390 updates from Alexander Gordeev:
- Fix virtual vs physical address confusion in vmem_add_range() and
vmem_remove_range() functions
- Include <linux/io.h> instead of <asm/io.h> and <asm-generic/io.h>
throughout s390 code
- Make all PSW related defines also available for assembler files.
Remove PSW_DEFAULT_KEY define from uapi for that
- When adding an undefined symbol the build still succeeds, but
userspace crashes trying to execute VDSO, because the symbol is not
resolved. Add undefined symbols check to prevent that
- Use kvmalloc_array() instead of kzalloc() for allocaton of 256k
memory when executing s390 crypto adapter IOCTL
- Add -fPIE flag to prevent decompressor misaligned symbol build error
with clang
- Use .balign instead of .align everywhere. This is a no-op for s390,
but with this there no mix in using .align and .balign anymore
- Filter out -mno-pic-data-is-text-relative flag when compiling kernel
to prevent VDSO build error
- Rework entering of DAT-on mode on CPU restart to use PSW_KERNEL_BITS
mask directly
- Do not retry administrative requests to some s390 crypto cards, since
the firmware assumes replay attacks
- Remove most of the debug code, which is build in when kernel config
option CONFIG_ZCRYPT_DEBUG is enabled
- Remove CONFIG_ZCRYPT_MULTIDEVNODES kernel config option and switch
off the multiple devices support for the s390 zcrypt device driver
- With the conversion to generic entry machine checks are accounted to
the current context instead of irq time. As result, the STCKF
instruction at the beginning of the machine check handler and the
lowcore member are no longer required, therefore remove it
- Fix various typos found with codespell
- Minor cleanups to CPU-measurement Counter and Sampling Facilities
code
- Revert patch that removes VMEM_MAX_PHYS macro, since it causes a
regression
* tag 's390-6.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (25 commits)
Revert "s390/mm: get rid of VMEM_MAX_PHYS macro"
s390/cpum_sf: remove check on CPU being online
s390/cpum_sf: handle casts consistently
s390/cpum_sf: remove unnecessary debug statement
s390/cpum_sf: remove parameter in call to pr_err
s390/cpum_sf: simplify function setup_pmu_cpu
s390/cpum_cf: remove unneeded debug statements
s390/entry: remove mcck clock
s390: fix various typos
s390/zcrypt: remove ZCRYPT_MULTIDEVNODES kernel config option
s390/zcrypt: do not retry administrative requests
s390/zcrypt: cleanup some debug code
s390/entry: rework entering DAT-on mode on CPU restart
s390/mm: fence off VM macros from asm and linker
s390: include linux/io.h instead of asm/io.h
s390/ptrace: make all psw related defines also available for asm
s390/ptrace: remove PSW_DEFAULT_KEY from uapi
s390/vdso: filter out mno-pic-data-is-text-relative cflag
s390: consistently use .balign instead of .align
s390/decompressor: fix misaligned symbol build error
...
|
|
Pull kvm updates from Paolo Bonzini:
"ARM64:
- Eager page splitting optimization for dirty logging, optionally
allowing for a VM to avoid the cost of hugepage splitting in the
stage-2 fault path.
- Arm FF-A proxy for pKVM, allowing a pKVM host to safely interact
with services that live in the Secure world. pKVM intervenes on
FF-A calls to guarantee the host doesn't misuse memory donated to
the hyp or a pKVM guest.
- Support for running the split hypervisor with VHE enabled, known as
'hVHE' mode. This is extremely useful for testing the split
hypervisor on VHE-only systems, and paves the way for new use cases
that depend on having two TTBRs available at EL2.
- Generalized framework for configurable ID registers from userspace.
KVM/arm64 currently prevents arbitrary CPU feature set
configuration from userspace, but the intent is to relax this
limitation and allow userspace to select a feature set consistent
with the CPU.
- Enable the use of Branch Target Identification (FEAT_BTI) in the
hypervisor.
- Use a separate set of pointer authentication keys for the
hypervisor when running in protected mode, as the host is untrusted
at runtime.
- Ensure timer IRQs are consistently released in the init failure
paths.
- Avoid trapping CTR_EL0 on systems with Enhanced Virtualization
Traps (FEAT_EVT), as it is a register commonly read from userspace.
- Erratum workaround for the upcoming AmpereOne part, which has
broken hardware A/D state management.
RISC-V:
- Redirect AMO load/store misaligned traps to KVM guest
- Trap-n-emulate AIA in-kernel irqchip for KVM guest
- Svnapot support for KVM Guest
s390:
- New uvdevice secret API
- CMM selftest and fixes
- fix racy access to target CPU for diag 9c
x86:
- Fix missing/incorrect #GP checks on ENCLS
- Use standard mmu_notifier hooks for handling APIC access page
- Drop now unnecessary TR/TSS load after VM-Exit on AMD
- Print more descriptive information about the status of SEV and
SEV-ES during module load
- Add a test for splitting and reconstituting hugepages during and
after dirty logging
- Add support for CPU pinning in demand paging test
- Add support for AMD PerfMonV2, with a variety of cleanups and minor
fixes included along the way
- Add a "nx_huge_pages=never" option to effectively avoid creating NX
hugepage recovery threads (because nx_huge_pages=off can be toggled
at runtime)
- Move handling of PAT out of MTRR code and dedup SVM+VMX code
- Fix output of PIC poll command emulation when there's an interrupt
- Add a maintainer's handbook to document KVM x86 processes,
preferred coding style, testing expectations, etc.
- Misc cleanups, fixes and comments
Generic:
- Miscellaneous bugfixes and cleanups
Selftests:
- Generate dependency files so that partial rebuilds work as
expected"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (153 commits)
Documentation/process: Add a maintainer handbook for KVM x86
Documentation/process: Add a label for the tip tree handbook's coding style
KVM: arm64: Fix misuse of KVM_ARM_VCPU_POWER_OFF bit index
RISC-V: KVM: Remove unneeded semicolon
RISC-V: KVM: Allow Svnapot extension for Guest/VM
riscv: kvm: define vcpu_sbi_ext_pmu in header
RISC-V: KVM: Expose IMSIC registers as attributes of AIA irqchip
RISC-V: KVM: Add in-kernel virtualization of AIA IMSIC
RISC-V: KVM: Expose APLIC registers as attributes of AIA irqchip
RISC-V: KVM: Add in-kernel emulation of AIA APLIC
RISC-V: KVM: Implement device interface for AIA irqchip
RISC-V: KVM: Skeletal in-kernel AIA irqchip support
RISC-V: KVM: Set kvm_riscv_aia_nr_hgei to zero
RISC-V: KVM: Add APLIC related defines
RISC-V: KVM: Add IMSIC related defines
RISC-V: KVM: Implement guest external interrupt line management
KVM: x86: Remove PRIx* definitions as they are solely for user space
s390/uv: Update query for secret-UVCs
s390/uv: replace scnprintf with sysfs_emit
s390/uvdevice: Add 'Lock Secret Store' UVC
...
|
|
Fix various typos found with codespell.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
Use the _AC() macro to make all psw related defines also available for
assembler files.
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
Move PSW_DEFAULT_KEY from uapi/asm/ptrace.h to asm/ptrace.h. This is
possible, since it depends on PAGE_DEFAULT_ACC which is not part of
uapi. Or in other words: this define cannot be used without error.
Therefore remove it from uapi.
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD
* New uvdevice secret API
* New CMM selftest
* cmm fix
* diag 9c racy access of target cpu fix
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Alexander Gordeev:
- Fix the style of protected key API driver source: use x-mas tree for
all local variable declarations
- Rework protected key API driver to not use the struct pkey_protkey
and pkey_clrkey anymore. Both structures have a fixed size buffer,
but with the support of ECC protected key these buffers are not big
enough. Use dynamic buffers internally and transparently for
userspace
- Add support for a new 'non CCA clear key token' with ECC clear keys
supported: ECC P256, ECC P384, ECC P521, ECC ED25519 and ECC ED448.
This makes it possible to derive a protected key from the ECC clear
key input via PKEY_KBLOB2PROTK3 ioctl, while currently the only way
to derive is via PCKMO instruction
- The s390 PMU of PAI crypto and extension 1 NNPA counters use atomic_t
for reference counting. Replace this with the proper data type
refcount_t
- Select ARCH_SUPPORTS_INT128, but limit this to clang for now, since
gcc generates inefficient code, which may lead to stack overflows
- Replace one-element array with flexible-array member in struct
vfio_ccw_parent and refactor the rest of the code accordingly. Also,
prefer struct_size() over sizeof() open- coded versions
- Introduce OS_INFO_FLAGS_ENTRY pointing to a flags field and
OS_INFO_FLAG_REIPL_CLEAR flag that informs a dumper whether the
system memory should be cleared or not once dumped
- Fix a hang when a user attempts to remove a VFIO-AP mediated device
attached to a guest: add VFIO_DEVICE_GET_IRQ_INFO and
VFIO_DEVICE_SET_IRQS IOCTLs and wire up the VFIO bus driver callback
to request a release of the device
- Fix calculation for R_390_GOTENT relocations for modules
- Allow any user space process with CAP_PERFMON capability read and
display the CPU Measurement facility counter sets
- Rework large statically-defined per-CPU cpu_cf_events data structure
and replace it with dynamically allocated structures created when a
perf_event_open() system call is invoked or /dev/hwctr device is
accessed
* tag 's390-6.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/cpum_cf: rework PER_CPU_DEFINE of struct cpu_cf_events
s390/cpum_cf: open access to hwctr device for CAP_PERFMON privileged process
s390/module: fix rela calculation for R_390_GOTENT
s390/vfio-ap: wire in the vfio_device_ops request callback
s390/vfio-ap: realize the VFIO_DEVICE_SET_IRQS ioctl
s390/vfio-ap: realize the VFIO_DEVICE_GET_IRQ_INFO ioctl
s390/pkey: add support for ecc clear key
s390/pkey: do not use struct pkey_protkey
s390/pkey: introduce reverse x-mas trees
s390/zcore: conditionally clear memory on reipl
s390/ipl: add REIPL_CLEAR flag to os_info
vfio/ccw: use struct_size() helper
vfio/ccw: replace one-element array with flexible-array member
s390: select ARCH_SUPPORTS_INT128
s390/pai_ext: replace atomic_t with refcount_t
s390/pai_crypto: replace atomic_t with refcount_t
|
|
Userspace can call the Lock Secret Store Ultravisor Call
using IOCTLs on the uvdevice. The Lock Secret Store UV call
disables all additions of secrets for the future.
The uvdevice is merely transporting the request from userspace to the
Ultravisor.
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Link: https://lore.kernel.org/r/20230615100533.3996107-6-seiden@linux.ibm.com
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Message-Id: <20230615100533.3996107-6-seiden@linux.ibm.com>
|
|
Userspace can call the List Secrets Ultravisor Call
using IOCTLs on the uvdevice. The List Secrets UV call lists the
identifier of the secrets in the UV secret store.
The uvdevice is merely transporting the request from userspace to
Ultravisor. It's neither checking nor manipulating the request or
response data.
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Link: https://lore.kernel.org/r/20230615100533.3996107-5-seiden@linux.ibm.com
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Message-Id: <20230615100533.3996107-5-seiden@linux.ibm.com>
|
|
Userspace can call the Add Secret Ultravisor Call using IOCTLs on the
uvdevice. The Add Secret UV call sends an encrypted and
cryptographically verified request to the Ultravisor. The request
inserts a protected guest's secret into the Ultravisor for later use.
The uvdevice is merely transporting the request from userspace to the
Ultravisor. It's neither checking nor manipulating the request data.
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Link: https://lore.kernel.org/r/20230615100533.3996107-4-seiden@linux.ibm.com
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Message-Id: <20230615100533.3996107-4-seiden@linux.ibm.com>
|
|
Add an IOCTL that allows userspace to find out which IOCTLs the uvdevice
supports without trial and error.
Explicitly expose the IOCTL nr for the request types.
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Link: https://lore.kernel.org/r/20230615100533.3996107-3-seiden@linux.ibm.com
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Message-Id: <20230615100533.3996107-3-seiden@linux.ibm.com>
|
|
Add support for a new 'non CCA clear key token' with these
ECC clear keys supported:
- ECC P256
- ECC P384
- ECC P521
- ECC ED25519
- ECC ED448
This makes it possible to derive a protected key from this
ECC clear key input via PKEY_KBLOB2PROTK3 ioctl. As of now
the only way to derive protected keys from these clear key
tokens is via PCKMO instruction. For AES keys an alternate
path via creating a secure key from the clear key and then
derive a protected key from the secure key exists. This
alternate path is not implemented for ECC keys as it would
require to rearrange and maybe recalculate the clear key
material for input to derive an CCA or EP11 ECC secure key.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
pahole says:
struct compat_statfs64 {
...
u32 f_spare[4]; /* 68 16 */
/* size: 88, cachelines: 1, members: 12 */
/* padding: 4 */
struct statfs {
...
unsigned int f_spare[4]; /* 68 16 */
/* size: 88, cachelines: 1, members: 12 */
/* padding: 4 */
struct statfs64 {
...
unsigned int f_spare[4]; /* 68 16 */
/* size: 88, cachelines: 1, members: 12 */
/* padding: 4 */
One has to keep the existence of padding in mind when working with
these structs. Grow f_spare arrays to 5 in order to simplify things.
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/r/20230504144021.808932-3-iii@linux.ibm.com
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
Add the internal logic to check for autoquiesce triggers and handle
them.
Quiesce and resume are functions that tell Linux to stop/resume
issuing I/Os to a specific DASD.
The DASD driver allows a manual quiesce/resume via ioctl.
Autoquiesce will define an amount of triggers that will lead to
an automatic quiesce if a certain event occurs.
There is no automatic resume.
All events will be reported via DASD Extended Error Reporting (EER)
if configured.
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Link: https://lore.kernel.org/r/20230405142017.2446986-3-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Modify the CPRBX struct to expose a new field ctfm for use with hardware
command filtering within a CEX8 crypto card in CCA coprocessor mode.
The field replaces a reserved byte padding field so that the layout of the
struct and the size does not change.
The new field is used only by user space applications which may use this to
expose the HW filtering facilities in the crypto firmware layers.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
The comment for addr_t doesn't make too much sense. Given that also
the formatting is incorrect, just remove it.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
The __uint128_t member was only added for future convenience to the
__vector128 struct. However this is a uapi header file, 31/32 bit (aka
compat layer) is still supported, but doesn't know anything about this
type:
/usr/include/asm/types.h:27:17: error: unknown type name __uint128_t
27 | __uint128_t v;
Therefore remove it again.
Fixes: b0b7b43fcc46 ("s390/vx: add 64 and 128 bit members to __vector128 struct")
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Add 64 and 128 bit members to __vector128 struct in order to allow reading
of the complete value, or the higher or lower part of vector register
contents instead of having to use casts.
Add an explicit __aligned(4) statement to avoid that the alignment of the
structure changes from 4 to 8. This should make sure that no breakage
happens because of this change.
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
In order to use the fs3270 one would need at least the ioctl definitions
in uapi. Add two new include files in uapi, which contain:
fs3270: ioctl number declarations + returned struct for TUBGETMOD.
raw3270: all the orders, attributes and similar stuff used with 3270
terminals.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
This adds support to use ECKD disks as dump device
to linux. The new dump type is called 'eckd_dump', parameters
are the same as for eckd ipl.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
This adds support to IPL from ECKD DASDs to linux.
It introduces a few sysfs files in /sys/firmware/reipl/eckd:
bootprog: the boot program selector
clear: whether to issue a diag308 LOAD_NORMAL or LOAD_CLEAR
device: the device to ipl from
br_chr: Cylinder/Head/Record number to read the bootrecord from.
Might be '0' or 'auto' if it should be read from the
volume label.
scpdata: data to be passed to the ipl'd program.
The new ipl type is called 'eckd'.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial driver updates from Greg KH:
"Here is the big set of TTY and Serial driver updates for 6.1-rc1.
Lots of cleanups in here, no real new functionality this time around,
with the diffstat being that we removed more lines than we added!
Included in here are:
- termios unification cleanups from Al Viro, it's nice to finally get
this work done
- tty serial transmit cleanups in various drivers in preparation for
more cleanup and unification in future releases (that work was not
ready for this release)
- n_gsm fixes and updates
- ktermios cleanups and code reductions
- dt bindings json conversions and updates for new devices
- some serial driver updates for new devices
- lots of other tiny cleanups and janitorial stuff. Full details in
the shortlog.
All of these have been in linux-next for a while with no reported
issues"
* tag 'tty-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (102 commits)
serial: cpm_uart: Don't request IRQ too early for console port
tty: serial: do unlock on a common path in altera_jtaguart_console_putc()
tty: serial: unify TX space reads under altera_jtaguart_tx_space()
tty: serial: use FIELD_GET() in lqasc_tx_ready()
tty: serial: extend lqasc_tx_ready() to lqasc_console_putchar()
tty: serial: allow pxa.c to be COMPILE_TESTed
serial: stm32: Fix unused-variable warning
tty: serial: atmel: Add COMMON_CLK dependency to SERIAL_ATMEL
serial: 8250: Fix restoring termios speed after suspend
serial: Deassert Transmit Enable on probe in driver-specific way
serial: 8250_dma: Convert to use uart_xmit_advance()
serial: 8250_omap: Convert to use uart_xmit_advance()
MAINTAINERS: Solve warning regarding inexistent atmel-usart binding
serial: stm32: Deassert Transmit Enable on ->rs485_config()
serial: ar933x: Deassert Transmit Enable on ->rs485_config()
tty: serial: atmel: Use FIELD_PREP/FIELD_GET
tty: serial: atmel: Make the driver aware of the existence of GCLK
tty: serial: atmel: Only divide Clock Divisor if the IP is USART
tty: serial: atmel: Separate mode clearing between UART and USART
dt-bindings: serial: atmel,at91-usart: Add gclk as a possible USART clock
...
|
|
The newly defined ioctl BIODASDCOPYPAIRSWAP takes a structure that
specifies a copy pair that should be swapped. It will call the device
discipline function to perform the swap operation.
The structure looks as followed:
struct dasd_copypair_swap_data_t {
char primary[20];
char secondary[20];
__u8 reserved[64];
};
where primary is the old primary device that will be replaced by the
secondary device. The old primary will become a secondary device
afterwards.
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Link: https://lore.kernel.org/r/20220920192616.808070-6-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
mandatory-y will have the generic picked for architectures that
don't have uapi/asm/termios.h of their own. ia64, parisc and
s390 ones are identical to generic, so...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Link: https://lore.kernel.org/r/YxGVXpS2dWoTwoa0@ZenIV
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Pull kvm updates from Paolo Bonzini:
"Quite a large pull request due to a selftest API overhaul and some
patches that had come in too late for 5.19.
ARM:
- Unwinder implementations for both nVHE modes (classic and
protected), complete with an overflow stack
- Rework of the sysreg access from userspace, with a complete rewrite
of the vgic-v3 view to allign with the rest of the infrastructure
- Disagregation of the vcpu flags in separate sets to better track
their use model.
- A fix for the GICv2-on-v3 selftest
- A small set of cosmetic fixes
RISC-V:
- Track ISA extensions used by Guest using bitmap
- Added system instruction emulation framework
- Added CSR emulation framework
- Added gfp_custom flag in struct kvm_mmu_memory_cache
- Added G-stage ioremap() and iounmap() functions
- Added support for Svpbmt inside Guest
s390:
- add an interface to provide a hypervisor dump for secure guests
- improve selftests to use TAP interface
- enable interpretive execution of zPCI instructions (for PCI
passthrough)
- First part of deferred teardown
- CPU Topology
- PV attestation
- Minor fixes
x86:
- Permit guests to ignore single-bit ECC errors
- Intel IPI virtualization
- Allow getting/setting pending triple fault with
KVM_GET/SET_VCPU_EVENTS
- PEBS virtualization
- Simplify PMU emulation by just using PERF_TYPE_RAW events
- More accurate event reinjection on SVM (avoid retrying
instructions)
- Allow getting/setting the state of the speaker port data bit
- Refuse starting the kvm-intel module if VM-Entry/VM-Exit controls
are inconsistent
- "Notify" VM exit (detect microarchitectural hangs) for Intel
- Use try_cmpxchg64 instead of cmpxchg64
- Ignore benign host accesses to PMU MSRs when PMU is disabled
- Allow disabling KVM's "MONITOR/MWAIT are NOPs!" behavior
- Allow NX huge page mitigation to be disabled on a per-vm basis
- Port eager page splitting to shadow MMU as well
- Enable CMCI capability by default and handle injected UCNA errors
- Expose pid of vcpu threads in debugfs
- x2AVIC support for AMD
- cleanup PIO emulation
- Fixes for LLDT/LTR emulation
- Don't require refcounted "struct page" to create huge SPTEs
- Miscellaneous cleanups:
- MCE MSR emulation
- Use separate namespaces for guest PTEs and shadow PTEs bitmasks
- PIO emulation
- Reorganize rmap API, mostly around rmap destruction
- Do not workaround very old KVM bugs for L0 that runs with nesting enabled
- new selftests API for CPUID
Generic:
- Fix races in gfn->pfn cache refresh; do not pin pages tracked by
the cache
- new selftests API using struct kvm_vcpu instead of a (vm, id)
tuple"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (606 commits)
selftests: kvm: set rax before vmcall
selftests: KVM: Add exponent check for boolean stats
selftests: KVM: Provide descriptive assertions in kvm_binary_stats_test
selftests: KVM: Check stat name before other fields
KVM: x86/mmu: remove unused variable
RISC-V: KVM: Add support for Svpbmt inside Guest/VM
RISC-V: KVM: Use PAGE_KERNEL_IO in kvm_riscv_gstage_ioremap()
RISC-V: KVM: Add G-stage ioremap() and iounmap() functions
KVM: Add gfp_custom flag in struct kvm_mmu_memory_cache
RISC-V: KVM: Add extensible CSR emulation framework
RISC-V: KVM: Add extensible system instruction emulation framework
RISC-V: KVM: Factor-out instruction emulation into separate sources
RISC-V: KVM: move preempt_disable() call in kvm_arch_vcpu_ioctl_run
RISC-V: KVM: Make kvm_riscv_guest_timer_init a void function
RISC-V: KVM: Fix variable spelling mistake
RISC-V: KVM: Improve ISA extension by using a bitmap
KVM, x86/mmu: Fix the comment around kvm_tdp_mmu_zap_leafs()
KVM: SVM: Dump Virtual Machine Save Area (VMSA) to klog
KVM: x86/mmu: Treat NX as a valid SPTE bit for NPT
KVM: x86: Do not block APIC write for non ICR registers
...
|
|
During a subsystem reset the Topology-Change-Report is cleared.
Let's give userland the possibility to clear the MTCR in the case
of a subsystem reset.
To migrate the MTCR, we give userland the possibility to
query the MTCR state.
We indicate KVM support for the CPU topology facility with a new
KVM capability: KVM_CAP_S390_CPU_TOPOLOGY.
Signed-off-by: Pierre Morel <pmorel@linux.ibm.com>
Reviewed-by: Janis Schoetterl-Glausch <scgl@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Message-Id: <20220714194334.127812-1-pmorel@linux.ibm.com>
Link: https://lore.kernel.org/all/20220714194334.127812-1-pmorel@linux.ibm.com/
[frankja@linux.ibm.com: Simple conflict resolution in Documentation/virt/kvm/api.rst]
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
|
|
There is a regular need in the kernel to provide a way to declare
having a dynamically sized set of trailing elements in a structure.
Kernel code should always use “flexible array members”[1] for these
cases. The older style of one-element or zero-length arrays should
no longer be used[2].
This code was transformed with the help of Coccinelle:
(linux-5.19-rc2$ spatch --jobs $(getconf _NPROCESSORS_ONLN) --sp-file script.cocci --include-headers --dir . > output.patch)
@@
identifier S, member, array;
type T1, T2;
@@
struct S {
...
T1 member;
T2 array[
- 0
];
};
-fstrict-flex-arrays=3 is coming and we need to land these changes
to prevent issues like these in the short future:
../fs/minix/dir.c:337:3: warning: 'strcpy' will always overflow; destination buffer has size 0,
but the source string has length 2 (including NUL byte) [-Wfortify-source]
strcpy(de3->name, ".");
^
Since these are all [0] to [] changes, the risk to UAPI is nearly zero. If
this breaks anything, we can use a union with a new member name.
[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://www.kernel.org/doc/html/v5.16/process/deprecated.html#zero-length-and-one-element-arrays
Link: https://github.com/KSPP/linux/issues/78
Build-tested-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/lkml/62b675ec.wKX6AOZ6cbE71vtF%25lkp@intel.com/
Acked-by: Dan Williams <dan.j.williams@intel.com> # For ndctl.h
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
|
|
Pull kvm updates from Paolo Bonzini:
"S390:
- ultravisor communication device driver
- fix TEID on terminating storage key ops
RISC-V:
- Added Sv57x4 support for G-stage page table
- Added range based local HFENCE functions
- Added remote HFENCE functions based on VCPU requests
- Added ISA extension registers in ONE_REG interface
- Updated KVM RISC-V maintainers entry to cover selftests support
ARM:
- Add support for the ARMv8.6 WFxT extension
- Guard pages for the EL2 stacks
- Trap and emulate AArch32 ID registers to hide unsupported features
- Ability to select and save/restore the set of hypercalls exposed to
the guest
- Support for PSCI-initiated suspend in collaboration with userspace
- GICv3 register-based LPI invalidation support
- Move host PMU event merging into the vcpu data structure
- GICv3 ITS save/restore fixes
- The usual set of small-scale cleanups and fixes
x86:
- New ioctls to get/set TSC frequency for a whole VM
- Allow userspace to opt out of hypercall patching
- Only do MSR filtering for MSRs accessed by rdmsr/wrmsr
AMD SEV improvements:
- Add KVM_EXIT_SHUTDOWN metadata for SEV-ES
- V_TSC_AUX support
Nested virtualization improvements for AMD:
- Support for "nested nested" optimizations (nested vVMLOAD/VMSAVE,
nested vGIF)
- Allow AVIC to co-exist with a nested guest running
- Fixes for LBR virtualizations when a nested guest is running, and
nested LBR virtualization support
- PAUSE filtering for nested hypervisors
Guest support:
- Decoupling of vcpu_is_preempted from PV spinlocks"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (199 commits)
KVM: x86: Fix the intel_pt PMI handling wrongly considered from guest
KVM: selftests: x86: Sync the new name of the test case to .gitignore
Documentation: kvm: reorder ARM-specific section about KVM_SYSTEM_EVENT_SUSPEND
x86, kvm: use correct GFP flags for preemption disabled
KVM: LAPIC: Drop pending LAPIC timer injection when canceling the timer
x86/kvm: Alloc dummy async #PF token outside of raw spinlock
KVM: x86: avoid calling x86 emulator without a decoded instruction
KVM: SVM: Use kzalloc for sev ioctl interfaces to prevent kernel data leak
x86/fpu: KVM: Set the base guest FPU uABI size to sizeof(struct kvm_xsave)
s390/uv_uapi: depend on CONFIG_S390
KVM: selftests: x86: Fix test failure on arch lbr capable platforms
KVM: LAPIC: Trace LAPIC timer expiration on every vmentry
KVM: s390: selftest: Test suppression indication on key prot exception
KVM: s390: Don't indicate suppression on dirtying, failing memop
selftests: drivers/s390x: Add uvdevice tests
drivers/s390/char: Add Ultravisor io device
MAINTAINERS: Update KVM RISC-V entry to cover selftests support
RISC-V: KVM: Introduce ISA extension register
RISC-V: KVM: Cleanup stale TLB entries when host CPU changes
RISC-V: KVM: Add remote HFENCE functions based on VCPU requests
...
|
|
This patch adds a new miscdevice to expose some Ultravisor functions
to userspace. Userspace can send IOCTLs to the uvdevice that will then
emit a corresponding Ultravisor Call and hands the result over to
userspace. The uvdevice is available if the Ultravisor Call facility is
present.
Userspace can call the Retrieve Attestation Measurement
Ultravisor Call using IOCTLs on the uvdevice.
The uvdevice will do some sanity checks first.
Then, copy the request data to kernel space, build the UVCB,
perform the UV call, and copy the result back to userspace.
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Link: https://lore.kernel.org/kvm/20220516113335.338212-1-seiden@linux.ibm.com/
Message-Id: <20220516113335.338212-1-seiden@linux.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com> (whitespace and tristate fixes, pick)
|
|
This patch tries to fix as much as possible of the
checkpatch.pl --strict findings:
CHECK: Logical continuations should be on the previous line
CHECK: No space is necessary after a cast
CHECK: Alignment should match open parenthesis
CHECK: 'useable' may be misspelled - perhaps 'usable'?
WARNING: Possible repeated word: 'is'
CHECK: spaces preferred around that '*' (ctx:VxV)
CHECK: Comparison to NULL could be written "!msg"
CHECK: Prefer kzalloc(sizeof(*zc)...) over kzalloc(sizeof(struct...)...)
CHECK: Unnecessary parentheses around resp_type->work
CHECK: Avoid CamelCase: <xcRB>
There is no functional change comming with this patch, only
code cleanup, renaming, whitespaces, indenting, ... but no
semantic change in any way. Also the API (zcrypt and pkey
header file) is semantically unchanged.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Jürgen Christ <jchrist@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
This patch does a little cleanup on the CPRBX struct
in zcrypt.h and the redundant CPRB struct definition in
zcrypt_msgtype6.c. Especially some of the misleading
fields from the CPRBX struct have been removed.
There is no semantic change coming with this patch.
The field names changed in the XCRB struct are only related
to reserved fields which should never been used.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Jürgen Christ <jchrist@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Vasily Gorbik:
- Raise minimum supported machine generation to z10, which comes with
various cleanups and code simplifications (usercopy/spectre
mitigation/etc).
- Rework extables and get rid of anonymous out-of-line fixups.
- Page table helpers cleanup. Add set_pXd()/set_pte() helper functions.
Covert pte_val()/pXd_val() macros to functions.
- Optimize kretprobe handling by avoiding extra kprobe on
__kretprobe_trampoline.
- Add support for CEX8 crypto cards.
- Allow to trigger AP bus rescan via writing to /sys/bus/ap/scans.
- Add CONFIG_EXPOLINE_EXTERN option to build the kernel without COMDAT
group sections which simplifies kpatch support.
- Always use the packed stack layout and extend kernel unwinder tests.
- Add sanity checks for ftrace code patching.
- Add s390dbf debug log for the vfio_ap device driver.
- Various virtual vs physical address confusion fixes.
- Various small fixes and improvements all over the code.
* tag 's390-5.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (69 commits)
s390/test_unwind: add kretprobe tests
s390/kprobes: Avoid additional kprobe in kretprobe handling
s390: convert ".insn" encoding to instruction names
s390: assume stckf is always present
s390/nospec: move to single register thunks
s390: raise minimum supported machine generation to z10
s390/uaccess: Add copy_from/to_user_key functions
s390/nospec: align and size extern thunks
s390/nospec: add an option to use thunk-extern
s390/nospec: generate single register thunks if possible
s390/pci: make zpci_set_irq()/zpci_clear_irq() static
s390: remove unused expoline to BC instructions
s390/irq: use assignment instead of cast
s390/traps: get rid of magic cast for per code
s390/traps: get rid of magic cast for program interruption code
s390/signal: fix typo in comments
s390/asm-offsets: remove unused defines
s390/test_unwind: avoid build warning with W=1
s390: remove .fixup section
s390/bpf: encode register within extable entry
...
|
|
This patch adds CEX8 exploitation support for the AP bus code,
the zcrypt device driver zoo and the vfio device driver.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Jürgen Christ <jchrist@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
linux/signal.h and asm/signal.h are currently excluded from the UAPI
compile-test because of the errors like follows:
HDRTEST usr/include/asm/signal.h
In file included from <command-line>:
./usr/include/asm/signal.h:103:9: error: unknown type name ‘size_t’
103 | size_t ss_size;
| ^~~~~~
The errors can be fixed by replacing size_t with __kernel_size_t.
Then, remove the no-header-test entries from user/include/Makefile.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Allow to configure the command line to an arbitrary length, with a
default of 4096 bytes. Also remove COMMAND_LINE_SIZE from
include/uapi/asm/setup.h as this is dynamic now and doesn't tell
anything about the command line size limitations of a new kernel
that might be loaded.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
Currently s390 supports a fixed maximum command line length of 896
bytes. This isn't enough as some installers are trying to pass all
configuration data via kernel command line, and even with zfcp alone
it is easy to generate really long command lines. Therefore extend
the command line to 4 kbytes.
In the parm area where the command line is stored there is no indication
of the maximum allowed length, so a new field which contains the maximum
length is added.
The parm area has always been initialized to zero, so with old kernels
this field would read zero. This is important because tools like zipl
could read this field. If it contains a number larger than zero zipl
knows the maximum length that can be stored in the parm area, otherwise
it must assume that it is booting a legacy kernel and only 896 bytes are
available.
The removing of trailing whitespace in head.S is also removed because
code to do this is already present in setup_boot_command_line().
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
To avoid casting ptrace members, add a union containing
both struct tpi_info and explicit int_code/int_parm members.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Suggested-by: Hendrick Brueckner <brueckner@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Add support to the CPU Measurement counter facility device driver
to extract complete counter sets per CPU and per counter set from user
space. This includes a new device named /dev/hwctr and support
for the device driver functions open, close and ioctl. Other
functions are not supported.
The ioctl command supports 3 subcommands:
S390_HWCTR_START: enables counter sets on a list of CPUs.
S390_HWCTR_STOP: disables counter sets on a list of CPUs.
S390_HWCTR_READ: reads counter sets on a list of CPUs.
The ioctl(..., S390_HWCTR_READ, ...) is the only subcommand which
returns data. It requires member data_bytes to be positive and
indicates the maximum amount of data available to store counter set
data. The other ioctl() subcommands do not use this member and it
should be set to zero.
The S390_HWCTR_READ subcommand returns the following data:
The cpuset data is flattened using the following scheme, stored in member
data:
0x0 0x8 0xc 0x10 0x10 0x18 0x20 0x28 0xU-1
+---------+-----+---------+-----+---------+-----+-----+------+------+
| no_cpus | cpu | no_sets | set | no_cnts | cv1 | cv2 | .... | cv_n |
+---------+-----+---------+-----+---------+-----+-----+------+------+
0xU 0xU+4 0xU+8 0xU+10 0xV-1
+-----+---------+-----+-----+------+------+
| set | no_cnts | cv1 | cv2 | .... | cv_n |
+-----+---------+-----+-----+------+------+
0xV 0xV+4 0xV+8 0xV+c
+-----+---------+-----+---------+-----+-----+------+------+
| cpu | no_sets | set | no_cnts | cv1 | cv2 | .... | cv_n |
+-----+---------+-----+---------+-----+-----+------+------+
U and V denote arbitrary hexadezimal addresses.
The first integer represents the number of CPUs data was extracted
from. This is followed by CPU number and number of counter sets extracted.
Both are two integer values. This is followed by the set identifer
and number of counters extracted. Both are two integer values. This is
followed by the counter values, each element is eight bytes in size.
The S390_HWCTR_READ ioctl subcommand is also limited to one call per
minute. This ensures that an application does not read out the
counter sets too often and reduces the overall CPU performance.
The complete counter set extraction is an expensive operation.
Reviewed-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
This patch converts s390 to use the generic entry infrastructure from
kernel/entry/*.
There are a few special things on s390:
- PIF_PER_TRAP is moved to TIF_PER_TRAP as the generic code doesn't
know about our PIF flags in exit_to_user_mode_loop().
- The old code had several ways to restart syscalls:
a) PIF_SYSCALL_RESTART, which was only set during execve to force a
restart after upgrading a process (usually qemu-kvm) to pgste page
table extensions.
b) PIF_SYSCALL, which is set by do_signal() to indicate that the
current syscall should be restarted. This is changed so that
do_signal() now also uses PIF_SYSCALL_RESTART. Continuing to use
PIF_SYSCALL doesn't work with the generic code, and changing it
to PIF_SYSCALL_RESTART makes PIF_SYSCALL and PIF_SYSCALL_RESTART
more unique.
- On s390 calling sys_sigreturn or sys_rt_sigreturn is implemented by
executing a svc instruction on the process stack which causes a fault.
While handling that fault the fault code sets PIF_SYSCALL to hand over
processing to the syscall code on exit to usermode.
The patch introduces PIF_SYSCALL_RET_SET, which is set if ptrace sets
a return value for a syscall. The s390x ptrace ABI uses r2 both for the
syscall number and return value, so ptrace cannot set the syscall number +
return value at the same time. The flag makes handling that a bit easier.
do_syscall() will just skip executing the syscall if PIF_SYSCALL_RET_SET
is set.
CONFIG_DEBUG_ASCE was removd in favour of the generic CONFIG_DEBUG_ENTRY.
CR1/7/13 will be checked both on kernel entry and exit to contain the
correct asces.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
Most architectures with the exception of alpha, mips, parisc and
sparc use the same values for these flags. Move their definitions into
asm-generic/signal-defs.h and allow the architectures with non-standard
values to override them. Also, document the non-standard flag values
in order to make it easier to add new generic flags in the future.
A consequence of this change is that on powerpc and x86, the constants'
values aside from SA_RESETHAND change signedness from unsigned
to signed. This is not expected to impact realistic use of these
constants. In particular the typical use of the constants where they
are or'ed together and assigned to sa_flags (or another int variable)
would not be affected.
Signed-off-by: Peter Collingbourne <pcc@google.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Reviewed-by: Dave Martin <Dave.Martin@arm.com>
Link: https://linux-review.googlesource.com/id/Ia3849f18b8009bf41faca374e701cdca36974528
Link: https://lkml.kernel.org/r/b6d0d1ec34f9ee93e1105f14f288fba5f89d1f24.1605235762.git.pcc@google.com
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
|
|
s/ait address/at address
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
