| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
pahole says:
struct compat_statfs64 {
...
u32 f_spare[4]; /* 68 16 */
/* size: 88, cachelines: 1, members: 12 */
/* padding: 4 */
struct statfs {
...
unsigned int f_spare[4]; /* 68 16 */
/* size: 88, cachelines: 1, members: 12 */
/* padding: 4 */
struct statfs64 {
...
unsigned int f_spare[4]; /* 68 16 */
/* size: 88, cachelines: 1, members: 12 */
/* padding: 4 */
One has to keep the existence of padding in mind when working with
these structs. Grow f_spare arrays to 5 in order to simplify things.
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/r/20230504144021.808932-3-iii@linux.ibm.com
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
Add the internal logic to check for autoquiesce triggers and handle
them.
Quiesce and resume are functions that tell Linux to stop/resume
issuing I/Os to a specific DASD.
The DASD driver allows a manual quiesce/resume via ioctl.
Autoquiesce will define an amount of triggers that will lead to
an automatic quiesce if a certain event occurs.
There is no automatic resume.
All events will be reported via DASD Extended Error Reporting (EER)
if configured.
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Link: https://lore.kernel.org/r/20230405142017.2446986-3-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Modify the CPRBX struct to expose a new field ctfm for use with hardware
command filtering within a CEX8 crypto card in CCA coprocessor mode.
The field replaces a reserved byte padding field so that the layout of the
struct and the size does not change.
The new field is used only by user space applications which may use this to
expose the HW filtering facilities in the crypto firmware layers.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
The comment for addr_t doesn't make too much sense. Given that also
the formatting is incorrect, just remove it.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
The __uint128_t member was only added for future convenience to the
__vector128 struct. However this is a uapi header file, 31/32 bit (aka
compat layer) is still supported, but doesn't know anything about this
type:
/usr/include/asm/types.h:27:17: error: unknown type name __uint128_t
27 | __uint128_t v;
Therefore remove it again.
Fixes: b0b7b43fcc46 ("s390/vx: add 64 and 128 bit members to __vector128 struct")
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Add 64 and 128 bit members to __vector128 struct in order to allow reading
of the complete value, or the higher or lower part of vector register
contents instead of having to use casts.
Add an explicit __aligned(4) statement to avoid that the alignment of the
structure changes from 4 to 8. This should make sure that no breakage
happens because of this change.
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
In order to use the fs3270 one would need at least the ioctl definitions
in uapi. Add two new include files in uapi, which contain:
fs3270: ioctl number declarations + returned struct for TUBGETMOD.
raw3270: all the orders, attributes and similar stuff used with 3270
terminals.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
This adds support to use ECKD disks as dump device
to linux. The new dump type is called 'eckd_dump', parameters
are the same as for eckd ipl.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
This adds support to IPL from ECKD DASDs to linux.
It introduces a few sysfs files in /sys/firmware/reipl/eckd:
bootprog: the boot program selector
clear: whether to issue a diag308 LOAD_NORMAL or LOAD_CLEAR
device: the device to ipl from
br_chr: Cylinder/Head/Record number to read the bootrecord from.
Might be '0' or 'auto' if it should be read from the
volume label.
scpdata: data to be passed to the ipl'd program.
The new ipl type is called 'eckd'.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial driver updates from Greg KH:
"Here is the big set of TTY and Serial driver updates for 6.1-rc1.
Lots of cleanups in here, no real new functionality this time around,
with the diffstat being that we removed more lines than we added!
Included in here are:
- termios unification cleanups from Al Viro, it's nice to finally get
this work done
- tty serial transmit cleanups in various drivers in preparation for
more cleanup and unification in future releases (that work was not
ready for this release)
- n_gsm fixes and updates
- ktermios cleanups and code reductions
- dt bindings json conversions and updates for new devices
- some serial driver updates for new devices
- lots of other tiny cleanups and janitorial stuff. Full details in
the shortlog.
All of these have been in linux-next for a while with no reported
issues"
* tag 'tty-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (102 commits)
serial: cpm_uart: Don't request IRQ too early for console port
tty: serial: do unlock on a common path in altera_jtaguart_console_putc()
tty: serial: unify TX space reads under altera_jtaguart_tx_space()
tty: serial: use FIELD_GET() in lqasc_tx_ready()
tty: serial: extend lqasc_tx_ready() to lqasc_console_putchar()
tty: serial: allow pxa.c to be COMPILE_TESTed
serial: stm32: Fix unused-variable warning
tty: serial: atmel: Add COMMON_CLK dependency to SERIAL_ATMEL
serial: 8250: Fix restoring termios speed after suspend
serial: Deassert Transmit Enable on probe in driver-specific way
serial: 8250_dma: Convert to use uart_xmit_advance()
serial: 8250_omap: Convert to use uart_xmit_advance()
MAINTAINERS: Solve warning regarding inexistent atmel-usart binding
serial: stm32: Deassert Transmit Enable on ->rs485_config()
serial: ar933x: Deassert Transmit Enable on ->rs485_config()
tty: serial: atmel: Use FIELD_PREP/FIELD_GET
tty: serial: atmel: Make the driver aware of the existence of GCLK
tty: serial: atmel: Only divide Clock Divisor if the IP is USART
tty: serial: atmel: Separate mode clearing between UART and USART
dt-bindings: serial: atmel,at91-usart: Add gclk as a possible USART clock
...
|
|
The newly defined ioctl BIODASDCOPYPAIRSWAP takes a structure that
specifies a copy pair that should be swapped. It will call the device
discipline function to perform the swap operation.
The structure looks as followed:
struct dasd_copypair_swap_data_t {
char primary[20];
char secondary[20];
__u8 reserved[64];
};
where primary is the old primary device that will be replaced by the
secondary device. The old primary will become a secondary device
afterwards.
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Link: https://lore.kernel.org/r/20220920192616.808070-6-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
mandatory-y will have the generic picked for architectures that
don't have uapi/asm/termios.h of their own. ia64, parisc and
s390 ones are identical to generic, so...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Link: https://lore.kernel.org/r/YxGVXpS2dWoTwoa0@ZenIV
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Pull kvm updates from Paolo Bonzini:
"Quite a large pull request due to a selftest API overhaul and some
patches that had come in too late for 5.19.
ARM:
- Unwinder implementations for both nVHE modes (classic and
protected), complete with an overflow stack
- Rework of the sysreg access from userspace, with a complete rewrite
of the vgic-v3 view to allign with the rest of the infrastructure
- Disagregation of the vcpu flags in separate sets to better track
their use model.
- A fix for the GICv2-on-v3 selftest
- A small set of cosmetic fixes
RISC-V:
- Track ISA extensions used by Guest using bitmap
- Added system instruction emulation framework
- Added CSR emulation framework
- Added gfp_custom flag in struct kvm_mmu_memory_cache
- Added G-stage ioremap() and iounmap() functions
- Added support for Svpbmt inside Guest
s390:
- add an interface to provide a hypervisor dump for secure guests
- improve selftests to use TAP interface
- enable interpretive execution of zPCI instructions (for PCI
passthrough)
- First part of deferred teardown
- CPU Topology
- PV attestation
- Minor fixes
x86:
- Permit guests to ignore single-bit ECC errors
- Intel IPI virtualization
- Allow getting/setting pending triple fault with
KVM_GET/SET_VCPU_EVENTS
- PEBS virtualization
- Simplify PMU emulation by just using PERF_TYPE_RAW events
- More accurate event reinjection on SVM (avoid retrying
instructions)
- Allow getting/setting the state of the speaker port data bit
- Refuse starting the kvm-intel module if VM-Entry/VM-Exit controls
are inconsistent
- "Notify" VM exit (detect microarchitectural hangs) for Intel
- Use try_cmpxchg64 instead of cmpxchg64
- Ignore benign host accesses to PMU MSRs when PMU is disabled
- Allow disabling KVM's "MONITOR/MWAIT are NOPs!" behavior
- Allow NX huge page mitigation to be disabled on a per-vm basis
- Port eager page splitting to shadow MMU as well
- Enable CMCI capability by default and handle injected UCNA errors
- Expose pid of vcpu threads in debugfs
- x2AVIC support for AMD
- cleanup PIO emulation
- Fixes for LLDT/LTR emulation
- Don't require refcounted "struct page" to create huge SPTEs
- Miscellaneous cleanups:
- MCE MSR emulation
- Use separate namespaces for guest PTEs and shadow PTEs bitmasks
- PIO emulation
- Reorganize rmap API, mostly around rmap destruction
- Do not workaround very old KVM bugs for L0 that runs with nesting enabled
- new selftests API for CPUID
Generic:
- Fix races in gfn->pfn cache refresh; do not pin pages tracked by
the cache
- new selftests API using struct kvm_vcpu instead of a (vm, id)
tuple"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (606 commits)
selftests: kvm: set rax before vmcall
selftests: KVM: Add exponent check for boolean stats
selftests: KVM: Provide descriptive assertions in kvm_binary_stats_test
selftests: KVM: Check stat name before other fields
KVM: x86/mmu: remove unused variable
RISC-V: KVM: Add support for Svpbmt inside Guest/VM
RISC-V: KVM: Use PAGE_KERNEL_IO in kvm_riscv_gstage_ioremap()
RISC-V: KVM: Add G-stage ioremap() and iounmap() functions
KVM: Add gfp_custom flag in struct kvm_mmu_memory_cache
RISC-V: KVM: Add extensible CSR emulation framework
RISC-V: KVM: Add extensible system instruction emulation framework
RISC-V: KVM: Factor-out instruction emulation into separate sources
RISC-V: KVM: move preempt_disable() call in kvm_arch_vcpu_ioctl_run
RISC-V: KVM: Make kvm_riscv_guest_timer_init a void function
RISC-V: KVM: Fix variable spelling mistake
RISC-V: KVM: Improve ISA extension by using a bitmap
KVM, x86/mmu: Fix the comment around kvm_tdp_mmu_zap_leafs()
KVM: SVM: Dump Virtual Machine Save Area (VMSA) to klog
KVM: x86/mmu: Treat NX as a valid SPTE bit for NPT
KVM: x86: Do not block APIC write for non ICR registers
...
|
|
During a subsystem reset the Topology-Change-Report is cleared.
Let's give userland the possibility to clear the MTCR in the case
of a subsystem reset.
To migrate the MTCR, we give userland the possibility to
query the MTCR state.
We indicate KVM support for the CPU topology facility with a new
KVM capability: KVM_CAP_S390_CPU_TOPOLOGY.
Signed-off-by: Pierre Morel <pmorel@linux.ibm.com>
Reviewed-by: Janis Schoetterl-Glausch <scgl@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Message-Id: <20220714194334.127812-1-pmorel@linux.ibm.com>
Link: https://lore.kernel.org/all/20220714194334.127812-1-pmorel@linux.ibm.com/
[frankja@linux.ibm.com: Simple conflict resolution in Documentation/virt/kvm/api.rst]
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
|
|
There is a regular need in the kernel to provide a way to declare
having a dynamically sized set of trailing elements in a structure.
Kernel code should always use “flexible array members”[1] for these
cases. The older style of one-element or zero-length arrays should
no longer be used[2].
This code was transformed with the help of Coccinelle:
(linux-5.19-rc2$ spatch --jobs $(getconf _NPROCESSORS_ONLN) --sp-file script.cocci --include-headers --dir . > output.patch)
@@
identifier S, member, array;
type T1, T2;
@@
struct S {
...
T1 member;
T2 array[
- 0
];
};
-fstrict-flex-arrays=3 is coming and we need to land these changes
to prevent issues like these in the short future:
../fs/minix/dir.c:337:3: warning: 'strcpy' will always overflow; destination buffer has size 0,
but the source string has length 2 (including NUL byte) [-Wfortify-source]
strcpy(de3->name, ".");
^
Since these are all [0] to [] changes, the risk to UAPI is nearly zero. If
this breaks anything, we can use a union with a new member name.
[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://www.kernel.org/doc/html/v5.16/process/deprecated.html#zero-length-and-one-element-arrays
Link: https://github.com/KSPP/linux/issues/78
Build-tested-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/lkml/62b675ec.wKX6AOZ6cbE71vtF%25lkp@intel.com/
Acked-by: Dan Williams <dan.j.williams@intel.com> # For ndctl.h
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
|
|
Pull kvm updates from Paolo Bonzini:
"S390:
- ultravisor communication device driver
- fix TEID on terminating storage key ops
RISC-V:
- Added Sv57x4 support for G-stage page table
- Added range based local HFENCE functions
- Added remote HFENCE functions based on VCPU requests
- Added ISA extension registers in ONE_REG interface
- Updated KVM RISC-V maintainers entry to cover selftests support
ARM:
- Add support for the ARMv8.6 WFxT extension
- Guard pages for the EL2 stacks
- Trap and emulate AArch32 ID registers to hide unsupported features
- Ability to select and save/restore the set of hypercalls exposed to
the guest
- Support for PSCI-initiated suspend in collaboration with userspace
- GICv3 register-based LPI invalidation support
- Move host PMU event merging into the vcpu data structure
- GICv3 ITS save/restore fixes
- The usual set of small-scale cleanups and fixes
x86:
- New ioctls to get/set TSC frequency for a whole VM
- Allow userspace to opt out of hypercall patching
- Only do MSR filtering for MSRs accessed by rdmsr/wrmsr
AMD SEV improvements:
- Add KVM_EXIT_SHUTDOWN metadata for SEV-ES
- V_TSC_AUX support
Nested virtualization improvements for AMD:
- Support for "nested nested" optimizations (nested vVMLOAD/VMSAVE,
nested vGIF)
- Allow AVIC to co-exist with a nested guest running
- Fixes for LBR virtualizations when a nested guest is running, and
nested LBR virtualization support
- PAUSE filtering for nested hypervisors
Guest support:
- Decoupling of vcpu_is_preempted from PV spinlocks"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (199 commits)
KVM: x86: Fix the intel_pt PMI handling wrongly considered from guest
KVM: selftests: x86: Sync the new name of the test case to .gitignore
Documentation: kvm: reorder ARM-specific section about KVM_SYSTEM_EVENT_SUSPEND
x86, kvm: use correct GFP flags for preemption disabled
KVM: LAPIC: Drop pending LAPIC timer injection when canceling the timer
x86/kvm: Alloc dummy async #PF token outside of raw spinlock
KVM: x86: avoid calling x86 emulator without a decoded instruction
KVM: SVM: Use kzalloc for sev ioctl interfaces to prevent kernel data leak
x86/fpu: KVM: Set the base guest FPU uABI size to sizeof(struct kvm_xsave)
s390/uv_uapi: depend on CONFIG_S390
KVM: selftests: x86: Fix test failure on arch lbr capable platforms
KVM: LAPIC: Trace LAPIC timer expiration on every vmentry
KVM: s390: selftest: Test suppression indication on key prot exception
KVM: s390: Don't indicate suppression on dirtying, failing memop
selftests: drivers/s390x: Add uvdevice tests
drivers/s390/char: Add Ultravisor io device
MAINTAINERS: Update KVM RISC-V entry to cover selftests support
RISC-V: KVM: Introduce ISA extension register
RISC-V: KVM: Cleanup stale TLB entries when host CPU changes
RISC-V: KVM: Add remote HFENCE functions based on VCPU requests
...
|
|
This patch adds a new miscdevice to expose some Ultravisor functions
to userspace. Userspace can send IOCTLs to the uvdevice that will then
emit a corresponding Ultravisor Call and hands the result over to
userspace. The uvdevice is available if the Ultravisor Call facility is
present.
Userspace can call the Retrieve Attestation Measurement
Ultravisor Call using IOCTLs on the uvdevice.
The uvdevice will do some sanity checks first.
Then, copy the request data to kernel space, build the UVCB,
perform the UV call, and copy the result back to userspace.
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Link: https://lore.kernel.org/kvm/20220516113335.338212-1-seiden@linux.ibm.com/
Message-Id: <20220516113335.338212-1-seiden@linux.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com> (whitespace and tristate fixes, pick)
|
|
This patch tries to fix as much as possible of the
checkpatch.pl --strict findings:
CHECK: Logical continuations should be on the previous line
CHECK: No space is necessary after a cast
CHECK: Alignment should match open parenthesis
CHECK: 'useable' may be misspelled - perhaps 'usable'?
WARNING: Possible repeated word: 'is'
CHECK: spaces preferred around that '*' (ctx:VxV)
CHECK: Comparison to NULL could be written "!msg"
CHECK: Prefer kzalloc(sizeof(*zc)...) over kzalloc(sizeof(struct...)...)
CHECK: Unnecessary parentheses around resp_type->work
CHECK: Avoid CamelCase: <xcRB>
There is no functional change comming with this patch, only
code cleanup, renaming, whitespaces, indenting, ... but no
semantic change in any way. Also the API (zcrypt and pkey
header file) is semantically unchanged.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Jürgen Christ <jchrist@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
This patch does a little cleanup on the CPRBX struct
in zcrypt.h and the redundant CPRB struct definition in
zcrypt_msgtype6.c. Especially some of the misleading
fields from the CPRBX struct have been removed.
There is no semantic change coming with this patch.
The field names changed in the XCRB struct are only related
to reserved fields which should never been used.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Jürgen Christ <jchrist@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Vasily Gorbik:
- Raise minimum supported machine generation to z10, which comes with
various cleanups and code simplifications (usercopy/spectre
mitigation/etc).
- Rework extables and get rid of anonymous out-of-line fixups.
- Page table helpers cleanup. Add set_pXd()/set_pte() helper functions.
Covert pte_val()/pXd_val() macros to functions.
- Optimize kretprobe handling by avoiding extra kprobe on
__kretprobe_trampoline.
- Add support for CEX8 crypto cards.
- Allow to trigger AP bus rescan via writing to /sys/bus/ap/scans.
- Add CONFIG_EXPOLINE_EXTERN option to build the kernel without COMDAT
group sections which simplifies kpatch support.
- Always use the packed stack layout and extend kernel unwinder tests.
- Add sanity checks for ftrace code patching.
- Add s390dbf debug log for the vfio_ap device driver.
- Various virtual vs physical address confusion fixes.
- Various small fixes and improvements all over the code.
* tag 's390-5.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (69 commits)
s390/test_unwind: add kretprobe tests
s390/kprobes: Avoid additional kprobe in kretprobe handling
s390: convert ".insn" encoding to instruction names
s390: assume stckf is always present
s390/nospec: move to single register thunks
s390: raise minimum supported machine generation to z10
s390/uaccess: Add copy_from/to_user_key functions
s390/nospec: align and size extern thunks
s390/nospec: add an option to use thunk-extern
s390/nospec: generate single register thunks if possible
s390/pci: make zpci_set_irq()/zpci_clear_irq() static
s390: remove unused expoline to BC instructions
s390/irq: use assignment instead of cast
s390/traps: get rid of magic cast for per code
s390/traps: get rid of magic cast for program interruption code
s390/signal: fix typo in comments
s390/asm-offsets: remove unused defines
s390/test_unwind: avoid build warning with W=1
s390: remove .fixup section
s390/bpf: encode register within extable entry
...
|
|
This patch adds CEX8 exploitation support for the AP bus code,
the zcrypt device driver zoo and the vfio device driver.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Jürgen Christ <jchrist@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
linux/signal.h and asm/signal.h are currently excluded from the UAPI
compile-test because of the errors like follows:
HDRTEST usr/include/asm/signal.h
In file included from <command-line>:
./usr/include/asm/signal.h:103:9: error: unknown type name ‘size_t’
103 | size_t ss_size;
| ^~~~~~
The errors can be fixed by replacing size_t with __kernel_size_t.
Then, remove the no-header-test entries from user/include/Makefile.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Allow to configure the command line to an arbitrary length, with a
default of 4096 bytes. Also remove COMMAND_LINE_SIZE from
include/uapi/asm/setup.h as this is dynamic now and doesn't tell
anything about the command line size limitations of a new kernel
that might be loaded.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
Currently s390 supports a fixed maximum command line length of 896
bytes. This isn't enough as some installers are trying to pass all
configuration data via kernel command line, and even with zfcp alone
it is easy to generate really long command lines. Therefore extend
the command line to 4 kbytes.
In the parm area where the command line is stored there is no indication
of the maximum allowed length, so a new field which contains the maximum
length is added.
The parm area has always been initialized to zero, so with old kernels
this field would read zero. This is important because tools like zipl
could read this field. If it contains a number larger than zero zipl
knows the maximum length that can be stored in the parm area, otherwise
it must assume that it is booting a legacy kernel and only 896 bytes are
available.
The removing of trailing whitespace in head.S is also removed because
code to do this is already present in setup_boot_command_line().
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
To avoid casting ptrace members, add a union containing
both struct tpi_info and explicit int_code/int_parm members.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Suggested-by: Hendrick Brueckner <brueckner@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Add support to the CPU Measurement counter facility device driver
to extract complete counter sets per CPU and per counter set from user
space. This includes a new device named /dev/hwctr and support
for the device driver functions open, close and ioctl. Other
functions are not supported.
The ioctl command supports 3 subcommands:
S390_HWCTR_START: enables counter sets on a list of CPUs.
S390_HWCTR_STOP: disables counter sets on a list of CPUs.
S390_HWCTR_READ: reads counter sets on a list of CPUs.
The ioctl(..., S390_HWCTR_READ, ...) is the only subcommand which
returns data. It requires member data_bytes to be positive and
indicates the maximum amount of data available to store counter set
data. The other ioctl() subcommands do not use this member and it
should be set to zero.
The S390_HWCTR_READ subcommand returns the following data:
The cpuset data is flattened using the following scheme, stored in member
data:
0x0 0x8 0xc 0x10 0x10 0x18 0x20 0x28 0xU-1
+---------+-----+---------+-----+---------+-----+-----+------+------+
| no_cpus | cpu | no_sets | set | no_cnts | cv1 | cv2 | .... | cv_n |
+---------+-----+---------+-----+---------+-----+-----+------+------+
0xU 0xU+4 0xU+8 0xU+10 0xV-1
+-----+---------+-----+-----+------+------+
| set | no_cnts | cv1 | cv2 | .... | cv_n |
+-----+---------+-----+-----+------+------+
0xV 0xV+4 0xV+8 0xV+c
+-----+---------+-----+---------+-----+-----+------+------+
| cpu | no_sets | set | no_cnts | cv1 | cv2 | .... | cv_n |
+-----+---------+-----+---------+-----+-----+------+------+
U and V denote arbitrary hexadezimal addresses.
The first integer represents the number of CPUs data was extracted
from. This is followed by CPU number and number of counter sets extracted.
Both are two integer values. This is followed by the set identifer
and number of counters extracted. Both are two integer values. This is
followed by the counter values, each element is eight bytes in size.
The S390_HWCTR_READ ioctl subcommand is also limited to one call per
minute. This ensures that an application does not read out the
counter sets too often and reduces the overall CPU performance.
The complete counter set extraction is an expensive operation.
Reviewed-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
This patch converts s390 to use the generic entry infrastructure from
kernel/entry/*.
There are a few special things on s390:
- PIF_PER_TRAP is moved to TIF_PER_TRAP as the generic code doesn't
know about our PIF flags in exit_to_user_mode_loop().
- The old code had several ways to restart syscalls:
a) PIF_SYSCALL_RESTART, which was only set during execve to force a
restart after upgrading a process (usually qemu-kvm) to pgste page
table extensions.
b) PIF_SYSCALL, which is set by do_signal() to indicate that the
current syscall should be restarted. This is changed so that
do_signal() now also uses PIF_SYSCALL_RESTART. Continuing to use
PIF_SYSCALL doesn't work with the generic code, and changing it
to PIF_SYSCALL_RESTART makes PIF_SYSCALL and PIF_SYSCALL_RESTART
more unique.
- On s390 calling sys_sigreturn or sys_rt_sigreturn is implemented by
executing a svc instruction on the process stack which causes a fault.
While handling that fault the fault code sets PIF_SYSCALL to hand over
processing to the syscall code on exit to usermode.
The patch introduces PIF_SYSCALL_RET_SET, which is set if ptrace sets
a return value for a syscall. The s390x ptrace ABI uses r2 both for the
syscall number and return value, so ptrace cannot set the syscall number +
return value at the same time. The flag makes handling that a bit easier.
do_syscall() will just skip executing the syscall if PIF_SYSCALL_RET_SET
is set.
CONFIG_DEBUG_ASCE was removd in favour of the generic CONFIG_DEBUG_ENTRY.
CR1/7/13 will be checked both on kernel entry and exit to contain the
correct asces.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
Most architectures with the exception of alpha, mips, parisc and
sparc use the same values for these flags. Move their definitions into
asm-generic/signal-defs.h and allow the architectures with non-standard
values to override them. Also, document the non-standard flag values
in order to make it easier to add new generic flags in the future.
A consequence of this change is that on powerpc and x86, the constants'
values aside from SA_RESETHAND change signedness from unsigned
to signed. This is not expected to impact realistic use of these
constants. In particular the typical use of the constants where they
are or'ed together and assigned to sa_flags (or another int variable)
would not be affected.
Signed-off-by: Peter Collingbourne <pcc@google.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Reviewed-by: Dave Martin <Dave.Martin@arm.com>
Link: https://linux-review.googlesource.com/id/Ia3849f18b8009bf41faca374e701cdca36974528
Link: https://lkml.kernel.org/r/b6d0d1ec34f9ee93e1105f14f288fba5f89d1f24.1605235762.git.pcc@google.com
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
|
|
s/ait address/at address
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
This patch extends the pkey kernel module to support CCA
and EP11 secure ECC (private) keys as source for deriving
ECC protected (private) keys.
There is yet another new ioctl to support this: PKEY_KBLOB2PROTK3
can handle all the old keys plus CCA and EP11 secure ECC keys.
For details see ioctl description in pkey.h.
The CPACF unit currently only supports a subset of 5
different ECC curves (P-256, P-384, P-521, ED25519, ED448) and
so only keys of this curve type can be transformed into
protected keys. However, the pkey and the cca/ep11 low level
functions do not check this but simple pass-through the key
blob to the firmware onto the crypto cards. So most likely
the failure will be a response carrying an error code
resulting in user space errno value EIO instead of EINVAL.
Deriving a protected key from an EP11 ECC secure key
requires a CEX7 in EP11 mode. Deriving a protected key from
an CCA ECC secure key requires a CEX7 in CCA mode.
Together with this new ioctl the ioctls for querying lists
of apqns (PKEY_APQNS4K and PKEY_APQNS4KT) have been extended
to support EP11 and CCA ECC secure key type and key blobs.
Together with this ioctl there comes a new struct ep11kblob_header
which is to be prepended onto the EP11 key blob. See details
in pkey.h for the fields in there. The older EP11 AES key blob
with some info stored in the (unused) session field is also
supported with this new ioctl.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
Pull KVM updates from Paolo Bonzini:
"s390:
- implement diag318
x86:
- Report last CPU for debugging
- Emulate smaller MAXPHYADDR in the guest than in the host
- .noinstr and tracing fixes from Thomas
- nested SVM page table switching optimization and fixes
Generic:
- Unify shadow MMU cache data structures across architectures"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (127 commits)
KVM: SVM: Fix sev_pin_memory() error handling
KVM: LAPIC: Set the TDCR settable bits
KVM: x86: Specify max TDP level via kvm_configure_mmu()
KVM: x86/mmu: Rename max_page_level to max_huge_page_level
KVM: x86: Dynamically calculate TDP level from max level and MAXPHYADDR
KVM: VXM: Remove temporary WARN on expected vs. actual EPTP level mismatch
KVM: x86: Pull the PGD's level from the MMU instead of recalculating it
KVM: VMX: Make vmx_load_mmu_pgd() static
KVM: x86/mmu: Add separate helper for shadow NPT root page role calc
KVM: VMX: Drop a duplicate declaration of construct_eptp()
KVM: nSVM: Correctly set the shadow NPT root level in its MMU role
KVM: Using macros instead of magic values
MIPS: KVM: Fix build error caused by 'kvm_run' cleanup
KVM: nSVM: remove nonsensical EXITINFO1 adjustment on nested NPF
KVM: x86: Add a capability for GUEST_MAXPHYADDR < HOST_MAXPHYADDR support
KVM: VMX: optimize #PF injection when MAXPHYADDR does not match
KVM: VMX: Add guest physical address check in EPT violation and misconfig
KVM: VMX: introduce vmx_need_pf_intercept
KVM: x86: update exception bitmap on CPUID changes
KVM: x86: rename update_bp_intercept to update_exception_bitmap
...
|
|
Some beautifications related to the internal only used
struct ap_message and related code. Instead of one int carrying
only the special flag now a u32 flags field is used.
At struct CPRBX the pointers to additional data are now marked
with __user. This caused some changes needed on code, where
these structs are also used within the zcrypt misc functions.
The ica_rsa_* structs now use the generic types __u8, __u32, ...
instead of char, unsigned int.
zcrypt_msg6 and zcrypt_msg50 use min_t() instead of min().
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
|
|
There is no interface to userspace which exposes anything that would
require the struct __debug_entry definition. Therefore remove it from
uapi. This allows to change the definition, since it is only kernel
internally used.
The only exception is the crash utility, however that tool must handle
changes all the time anyway.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
|
|
DIAGNOSE 0x318 (diag318) sets information regarding the environment
the VM is running in (Linux, z/VM, etc) and is observed via
firmware/service events.
This is a privileged s390x instruction that must be intercepted by
SIE. Userspace handles the instruction as well as migration. Data
is communicated via VCPU register synchronization.
The Control Program Name Code (CPNC) is stored in the SIE block. The
CPNC along with the Control Program Version Code (CPVC) are stored
in the kvm_vcpu_arch struct.
This data is reset on load normal and clear resets.
Signed-off-by: Collin Walling <walling@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20200622154636.5499-3-walling@linux.ibm.com
[borntraeger@de.ibm.com: fix sync_reg position]
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
|
|
Recognize IPL Block's Ipl Type of "nvme". Populate related structs and sysfs
entries.
Signed-off-by: Jason J. Herne <jjherne@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
Extend the low level ep11 misc functions implementation by
several functions to support EP11 key objects for paes and pkey:
- EP11 AES secure key generation
- EP11 AES secure key generation from given clear key value
- EP11 AES secure key blob check
- findcard function returns list of apqns based on given criterias
- EP11 AES secure key derive to CPACF protected key
Extend the pkey module to be able to generate and handle EP11
secure keys and also use them as base for deriving protected
keys for CPACF usage. These ioctls are extended to support
EP11 keys: PKEY_GENSECK2, PKEY_CLR2SECK2, PKEY_VERIFYKEY2,
PKEY_APQNS4K, PKEY_APQNS4KT, PKEY_KBLOB2PROTK2.
Additionally the 'clear key' token to protected key now uses
an EP11 card if the other ways (via PCKMO, via CCA) fail.
The PAES cipher implementation needed a new upper limit for
the max key size, but is now also working with EP11 keys.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
Minor rework for struct ep11_cprb and struct ep11_urb. Use of u8, u16,
u32 instead of unsigned char. Declare pointers to mem from userspace
with __user to give sparse a chance to check.
Export zcrypt_send_ep11_cprb() function as this function will be
called by code in progress which will build ep11 cprbs within the
zcrypt device driver zoo and send them to EP11 crypto cards.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
For EP11 CPRBs there was only to choose between specify
one or more ep11 targets or not give a target at all. Without
any target the zcrypt code assumed AUTOSELECT. For EP11 this
ended up in choosing any EP11 APQN with regards to the weight.
However, CCA CPRBs can have a more fine granular target
addressing. The caller can give 0xFFFF as AUTOSELECT for
the card and/or the domain. So it's possible to address
any card but domain given or any domain but card given.
This patch now introduces the very same for EP11 CPRB handling.
An EP11 target entry now may contain 0xFFFF as card and/or
domain value with the meaning of ANY card or domain. So
now the same behavior as with CCA CPRBs becomes possible:
Address any card with given domain or address any domain within
given card.
For convenience the zcrypt.h header file now has two new
defines AUTOSEL_AP and AUTOSEL_DOM covering the 0xFFFF
value to address card any and domain any.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
Userspace cannot compile <asm/ipcbuf.h> due to some missing type
definitions. For example, building it for x86 fails as follows:
CC usr/include/asm/ipcbuf.h.s
In file included from usr/include/asm/ipcbuf.h:1:0,
from <command-line>:32:
usr/include/asm-generic/ipcbuf.h:21:2: error: unknown type name `__kernel_key_t'
__kernel_key_t key;
^~~~~~~~~~~~~~
usr/include/asm-generic/ipcbuf.h:22:2: error: unknown type name `__kernel_uid32_t'
__kernel_uid32_t uid;
^~~~~~~~~~~~~~~~
usr/include/asm-generic/ipcbuf.h:23:2: error: unknown type name `__kernel_gid32_t'
__kernel_gid32_t gid;
^~~~~~~~~~~~~~~~
usr/include/asm-generic/ipcbuf.h:24:2: error: unknown type name `__kernel_uid32_t'
__kernel_uid32_t cuid;
^~~~~~~~~~~~~~~~
usr/include/asm-generic/ipcbuf.h:25:2: error: unknown type name `__kernel_gid32_t'
__kernel_gid32_t cgid;
^~~~~~~~~~~~~~~~
usr/include/asm-generic/ipcbuf.h:26:2: error: unknown type name `__kernel_mode_t'
__kernel_mode_t mode;
^~~~~~~~~~~~~~~
usr/include/asm-generic/ipcbuf.h:28:35: error: `__kernel_mode_t' undeclared here (not in a function)
unsigned char __pad1[4 - sizeof(__kernel_mode_t)];
^~~~~~~~~~~~~~~
usr/include/asm-generic/ipcbuf.h:31:2: error: unknown type name `__kernel_ulong_t'
__kernel_ulong_t __unused1;
^~~~~~~~~~~~~~~~
usr/include/asm-generic/ipcbuf.h:32:2: error: unknown type name `__kernel_ulong_t'
__kernel_ulong_t __unused2;
^~~~~~~~~~~~~~~~
It is just a matter of missing include directive.
Include <linux/posix_types.h> to make it self-contained, and add it to
the compile-test coverage.
Link: http://lkml.kernel.org/r/20191030063855.9989-1-yamada.masahiro@socionext.com
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull more s390 updates from Vasily Gorbik:
- Fix three kasan findings
- Add PERF_EVENT_IOC_PERIOD ioctl support
- Add Crypto Express7S support and extend sysfs attributes for pkey
- Minor common I/O layer documentation corrections
* tag 's390-5.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/cio: exclude subchannels with no parent from pseudo check
s390/cio: avoid calling strlen on null pointer
s390/topology: avoid firing events before kobjs are created
s390/cpumf: Remove mixed white space
s390/cpum_sf: Support ioctl PERF_EVENT_IOC_PERIOD
s390/zcrypt: CEX7S exploitation support
s390/cio: fix intparm documentation
s390/pkey: Add sysfs attributes to emit AES CIPHER key blobs
|
|
This patch adds CEX7 exploitation support for the AP bus code,
the zcrypt device driver zoo and the vfio device driver.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
Pull KVM updates from Paolo Bonzini:
"s390:
- ioctl hardening
- selftests
ARM:
- ITS translation cache
- support for 512 vCPUs
- various cleanups and bugfixes
PPC:
- various minor fixes and preparation
x86:
- bugfixes all over the place (posted interrupts, SVM, emulation
corner cases, blocked INIT)
- some IPI optimizations"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (75 commits)
KVM: X86: Use IPI shorthands in kvm guest when support
KVM: x86: Fix INIT signal handling in various CPU states
KVM: VMX: Introduce exit reason for receiving INIT signal on guest-mode
KVM: VMX: Stop the preemption timer during vCPU reset
KVM: LAPIC: Micro optimize IPI latency
kvm: Nested KVM MMUs need PAE root too
KVM: x86: set ctxt->have_exception in x86_decode_insn()
KVM: x86: always stop emulation on page fault
KVM: nVMX: trace nested VM-Enter failures detected by H/W
KVM: nVMX: add tracepoint for failed nested VM-Enter
x86: KVM: svm: Fix a check in nested_svm_vmrun()
KVM: x86: Return to userspace with internal error on unexpected exit reason
KVM: x86: Add kvm_emulate_{rd,wr}msr() to consolidate VXM/SVM code
KVM: x86: Refactor up kvm_{g,s}et_msr() to simplify callers
doc: kvm: Fix return description of KVM_SET_MSRS
KVM: X86: Tune PLE Window tracepoint
KVM: VMX: Change ple_window type to unsigned int
KVM: X86: Remove tailing newline for tracepoints
KVM: X86: Trace vcpu_id for vmexit
KVM: x86: Manually calculate reserved bits when loading PDPTRS
...
|
|
If unknown bits are set in kvm_valid_regs or kvm_dirty_regs, this
clearly indicates that something went wrong in the KVM userspace
application. The x86 variant of KVM already contains a check for
bad bits, so let's do the same on s390x now, too.
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Link: https://lore.kernel.org/lkml/20190904085200.29021-2-thuth@redhat.com/
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
|
|
Introduce new ioctls and structs to be used with these new ioctls
which are able to handle CCA AES secure keys and CCA AES cipher keys:
PKEY_GENSECK2: Generate secure key, version 2.
Generate either a CCA AES secure key or a CCA AES cipher key.
PKEY_CLR2SECK2: Generate secure key from clear key value, version 2.
Construct a CCA AES secure key or CCA AES cipher key from a given
clear key value.
PKEY_VERIFYKEY2: Verify the given secure key, version 2.
Check for correct key type. If cardnr and domain are given, also
check if this apqn is able to handle this type of key. If cardnr and
domain are 0xFFFF, on return these values are filled with an apqn
able to handle this key. The function also checks for the master key
verification patterns of the key matching to the current or
alternate mkvp of the apqn. CCA AES cipher keys are also checked
for CPACF export allowed (CPRTCPAC flag). Currently CCA AES secure
keys and CCA AES cipher keys are supported (may get extended in the
future).
PKEY_KBLOB2PROTK2: Transform a key blob (of any type) into
a protected key, version 2. Difference to version 1 is only that
this new ioctl has additional parameters to provide a list of
apqns to be used for the transformation.
PKEY_APQNS4K: Generate a list of APQNs based on the key blob given.
Is able to find out which type of secure key is given (CCA AES
secure key or CCA AES cipher key) and tries to find all matching
crypto cards based on the MKVP and maybe other criterias (like CCA
AES cipher keys need a CEX6C or higher). The list of APQNs is
further filtered by the key's mkvp which needs to match to either
the current mkvp or the alternate mkvp (which is the old mkvp on CCA
adapters) of the apqns. The flags argument may be used to limit the
matching apqns. If the PKEY_FLAGS_MATCH_CUR_MKVP is given, only the
current mkvp of each apqn is compared. Likewise with the
PKEY_FLAGS_MATCH_ALT_MKVP. If both are given it is assumed to return
apqns where either the current or the alternate mkvp matches. If no
matching APQN is found, the ioctl returns with 0 but the
apqn_entries value is 0.
PKEY_APQNS4KT: Generate a list of APQNs based on the key type given.
Build a list of APQNs based on the given key type and maybe further
restrict the list by given master key verification patterns.
For different key types there may be different ways to match the
master key verification patterns. For CCA keys (CCA data key and CCA
cipher key) the first 8 bytes of cur_mkvp refer to the current mkvp
value of the apqn and the first 8 bytes of the alt_mkvp refer to the
old mkvp. The flags argument controls if the apqns current and/or
alternate mkvp should match. If the PKEY_FLAGS_MATCH_CUR_MKVP is
given, only the current mkvp of each apqn is compared. Likewise with
the PKEY_FLAGS_MATCH_ALT_MKVP. If both are given, it is assumed to
return apqns where either the current or the alternate mkvp
matches. If no matching APQN is found, the ioctl returns with 0 but
the apqn_entries value is 0.
These new ioctls are now prepared for another new type of secure key
blob which may come in the future. They all use a pointer to the key
blob and a key blob length information instead of some hardcoded byte
array. They all use the new enums pkey_key_type, pkey_key_size and
pkey_key_info for getting/setting key type, key size and additional
info about the key. All but the PKEY_VERIFY2 ioctl now work based on a
list of apqns. This list is walked through trying to perform the
operation on exactly this apqn without any further checking (like card
type or online state). If the apqn fails, simple the next one in the
list is tried until success (return 0) or the end of the list is
reached (return -1 with errno ENODEV). All apqns in the list need to
be exact apqns (0xFFFF as any card or domain is not allowed). There
are two new ioctls which can be used to build a list of apqns based on
a key or key type and maybe restricted by match to a current or
alternate master key verifcation pattern.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx
Pull SPDX fixes from Greg KH:
"Here are some small SPDX fixes for 5.3-rc2 for things that came in
during the 5.3-rc1 merge window that we previously missed.
Only three small patches here:
- two uapi patches to resolve some SPDX tags that were not correct
- fix an invalid SPDX tag in the iomap Makefile file
All have been properly reviewed on the public mailing lists"
* tag 'spdx-5.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx:
iomap: fix Invalid License ID
treewide: remove SPDX "WITH Linux-syscall-note" from kernel-space headers again
treewide: add "WITH Linux-syscall-note" to SPDX tag of uapi headers
|
|
UAPI headers licensed under GPL are supposed to have exception
"WITH Linux-syscall-note" so that they can be included into non-GPL
user space application code.
The exception note is missing in some UAPI headers.
Some of them slipped in by the treewide conversion commit b24413180f56
("License cleanup: add SPDX GPL-2.0 license identifier to files with
no license"). Just run:
$ git show --oneline b24413180f56 -- arch/x86/include/uapi/asm/
I believe they are not intentional, and should be fixed too.
This patch was generated by the following script:
git grep -l --not -e Linux-syscall-note --and -e SPDX-License-Identifier \
-- :arch/*/include/uapi/asm/*.h :include/uapi/ :^*/Kbuild |
while read file
do
sed -i -e '/[[:space:]]OR[[:space:]]/s/\(GPL-[^[:space:]]*\)/(\1 WITH Linux-syscall-note)/g' \
-e '/[[:space:]]or[[:space:]]/s/\(GPL-[^[:space:]]*\)/(\1 WITH Linux-syscall-note)/g' \
-e '/[[:space:]]OR[[:space:]]/!{/[[:space:]]or[[:space:]]/!s/\(GPL-[^[:space:]]*\)/\1 WITH Linux-syscall-note/g}' $file
done
After this patch is applied, there are 5 UAPI headers that do not contain
"WITH Linux-syscall-note". They are kept untouched since this exception
applies only to GPL variants.
$ git grep --not -e Linux-syscall-note --and -e SPDX-License-Identifier \
-- :arch/*/include/uapi/asm/*.h :include/uapi/ :^*/Kbuild
include/uapi/drm/panfrost_drm.h:/* SPDX-License-Identifier: MIT */
include/uapi/linux/batman_adv.h:/* SPDX-License-Identifier: MIT */
include/uapi/linux/qemu_fw_cfg.h:/* SPDX-License-Identifier: BSD-3-Clause */
include/uapi/linux/vbox_err.h:/* SPDX-License-Identifier: MIT */
include/uapi/linux/virtio_iommu.h:/* SPDX-License-Identifier: BSD-3-Clause */
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When CONFIG_UAPI_HEADER_TEST=y, exported headers are compile-tested to
make sure they can be included from user-space.
Currently, zcrypt.h is excluded from the test coverage. To make it
join the compile-test, we need to fix the build errors attached below.
For a case like this, we decided to use __u{8,16,32,64} variable types
in this discussion:
https://lkml.org/lkml/2019/6/5/18
Build log:
CC usr/include/asm/zcrypt.h.s
In file included from <command-line>:32:0:
./usr/include/asm/zcrypt.h:163:2: error: unknown type name ‘uint16_t’
uint16_t cprb_len;
^~~~~~~~
./usr/include/asm/zcrypt.h:168:2: error: unknown type name ‘uint32_t’
uint32_t source_id;
^~~~~~~~
./usr/include/asm/zcrypt.h:169:2: error: unknown type name ‘uint32_t’
uint32_t target_id;
^~~~~~~~
./usr/include/asm/zcrypt.h:170:2: error: unknown type name ‘uint32_t’
uint32_t ret_code;
^~~~~~~~
./usr/include/asm/zcrypt.h:171:2: error: unknown type name ‘uint32_t’
uint32_t reserved1;
^~~~~~~~
./usr/include/asm/zcrypt.h:172:2: error: unknown type name ‘uint32_t’
uint32_t reserved2;
^~~~~~~~
./usr/include/asm/zcrypt.h:173:2: error: unknown type name ‘uint32_t’
uint32_t payload_len;
^~~~~~~~
./usr/include/asm/zcrypt.h:182:2: error: unknown type name ‘uint16_t’
uint16_t ap_id;
^~~~~~~~
./usr/include/asm/zcrypt.h:183:2: error: unknown type name ‘uint16_t’
uint16_t dom_id;
^~~~~~~~
./usr/include/asm/zcrypt.h:198:2: error: unknown type name ‘uint16_t’
uint16_t targets_num;
^~~~~~~~
./usr/include/asm/zcrypt.h:199:2: error: unknown type name ‘uint64_t’
uint64_t targets;
^~~~~~~~
./usr/include/asm/zcrypt.h:200:2: error: unknown type name ‘uint64_t’
uint64_t weight;
^~~~~~~~
./usr/include/asm/zcrypt.h:201:2: error: unknown type name ‘uint64_t’
uint64_t req_no;
^~~~~~~~
./usr/include/asm/zcrypt.h:202:2: error: unknown type name ‘uint64_t’
uint64_t req_len;
^~~~~~~~
./usr/include/asm/zcrypt.h:203:2: error: unknown type name ‘uint64_t’
uint64_t req;
^~~~~~~~
./usr/include/asm/zcrypt.h:204:2: error: unknown type name ‘uint64_t’
uint64_t resp_len;
^~~~~~~~
./usr/include/asm/zcrypt.h:205:2: error: unknown type name ‘uint64_t’
uint64_t resp;
^~~~~~~~
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
|
|
Userspace tools might have the need to release space for Extent Space
Efficient (ESE) volumes when working with such a device.
Provide the necessarry interface for such a task by implementing a new
ioctl BIODASDRAS. The ioctl uses the format_data_t data structure for
data input:
typedef struct format_data_t {
unsigned int start_unit; /* from track */
unsigned int stop_unit; /* to track */
unsigned int blksize; /* sectorsize */
unsigned int intensity;
} format_data_t;
If the intensity is set to 0x40, start_unit and stop_unit are ignored
and space for the entire volume is released. Otherwise, if intensity is
set to 0, the respective range is released (if possible).
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
The definition for the bit that removes the write permission for record
zero when formatting was missing. Add it to complete the list.
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
