summaryrefslogtreecommitdiff
path: root/arch/riscv
AgeCommit message (Collapse)AuthorFilesLines
2023-09-10Merge tag 'riscv-for-linus-6.6-mw2-2' of ↵Linus Torvalds34-82/+907
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull more RISC-V updates from Palmer Dabbelt: - The kernel now dynamically probes for misaligned access speed, as opposed to relying on a table of known implementations. - Support for non-coherent devices on systems using the Andes AX45MP core, including the RZ/Five SoCs. - Support for the V extension in ptrace(), again. - Support for KASLR. - Support for the BPF prog pack allocator in RISC-V. - A handful of bug fixes and cleanups. * tag 'riscv-for-linus-6.6-mw2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (25 commits) soc: renesas: Kconfig: For ARCH_R9A07G043 select the required configs if dependencies are met riscv: Kconfig.errata: Add dependency for RISCV_SBI in ERRATA_ANDES config riscv: Kconfig.errata: Drop dependency for MMU in ERRATA_ANDES_CMO config riscv: Kconfig: Select DMA_DIRECT_REMAP only if MMU is enabled bpf, riscv: use prog pack allocator in the BPF JIT riscv: implement a memset like function for text riscv: extend patch_text_nosync() for multiple pages bpf: make bpf_prog_pack allocator portable riscv: libstub: Implement KASLR by using generic functions libstub: Fix compilation warning for rv32 arm64: libstub: Move KASLR handling functions to kaslr.c riscv: Dump out kernel offset information on panic riscv: Introduce virtual kernel mapping KASLR RISC-V: Add ptrace support for vectors soc: renesas: Kconfig: Select the required configs for RZ/Five SoC cache: Add L2 cache management for Andes AX45MP RISC-V core dt-bindings: cache: andestech,ax45mp-cache: Add DT binding documentation for L2 cache controller riscv: mm: dma-noncoherent: nonstandard cache operations support riscv: errata: Add Andes alternative ports riscv: asm: vendorid_list: Add Andes Technology to the vendors list ...
2023-09-08riscv: Kconfig.errata: Add dependency for RISCV_SBI in ERRATA_ANDES configLad Prabhakar1-1/+1
Andes errata uses sbi_ecalll() which is only available if RISCV_SBI is enabled. So add an dependency for RISCV_SBI in ERRATA_ANDES config to avoid any build failures. Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202308311610.ec6bm2G8-lkp@intel.com/ Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Randy Dunlap <rdunlap@infradead.org> Link: https://lore.kernel.org/r/20230901110320.312674-1-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-09-08riscv: Kconfig.errata: Drop dependency for MMU in ERRATA_ANDES_CMO configLad Prabhakar1-1/+1
Now that RISCV_DMA_NONCOHERENT conditionally selects DMA_DIRECT_REMAP ie only if MMU is enabled, we no longer need the MMU dependency in ERRATA_ANDES_CMO config. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20230901105858.311745-1-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-09-08riscv: Kconfig: Select DMA_DIRECT_REMAP only if MMU is enabledLad Prabhakar1-1/+1
kernel/dma/mapping.c has its use of pgprot_dmacoherent() inside an #ifdef CONFIG_MMU block. kernel/dma/pool.c has its use of pgprot_dmacoherent() inside an #ifdef CONFIG_DMA_DIRECT_REMAP block. So select DMA_DIRECT_REMAP only if MMU is enabled for RISCV_DMA_NONCOHERENT config. This avoids users to explicitly select MMU. Suggested-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://lore.kernel.org/r/20230901105111.311200-1-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-09-08Merge patch series "bpf, riscv: use BPF prog pack allocator in BPF JIT"Palmer Dabbelt5-33/+251
Puranjay Mohan <puranjay12@gmail.com> says: Here is some data to prove the V2 fixes the problem: Without this series: root@rv-selftester:~/src/kselftest/bpf# time ./test_tag test_tag: OK (40945 tests) real 7m47.562s user 0m24.145s sys 6m37.064s With this series applied: root@rv-selftester:~/src/selftest/bpf# time ./test_tag test_tag: OK (40945 tests) real 7m29.472s user 0m25.865s sys 6m18.401s BPF programs currently consume a page each on RISCV. For systems with many BPF programs, this adds significant pressure to instruction TLB. High iTLB pressure usually causes slow down for the whole system. Song Liu introduced the BPF prog pack allocator[1] to mitigate the above issue. It packs multiple BPF programs into a single huge page. It is currently only enabled for the x86_64 BPF JIT. I enabled this allocator on the ARM64 BPF JIT[2]. It is being reviewed now. This patch series enables the BPF prog pack allocator for the RISCV BPF JIT. ====================================================== Performance Analysis of prog pack allocator on RISCV64 ====================================================== Test setup: =========== Host machine: Debian GNU/Linux 11 (bullseye) Qemu Version: QEMU emulator version 8.0.3 (Debian 1:8.0.3+dfsg-1) u-boot-qemu Version: 2023.07+dfsg-1 opensbi Version: 1.3-1 To test the performance of the BPF prog pack allocator on RV, a stresser tool[4] linked below was built. This tool loads 8 BPF programs on the system and triggers 5 of them in an infinite loop by doing system calls. The runner script starts 20 instances of the above which loads 8*20=160 BPF programs on the system, 5*20=100 of which are being constantly triggered. The script is passed a command which would be run in the above environment. The script was run with following perf command: ./run.sh "perf stat -a \ -e iTLB-load-misses \ -e dTLB-load-misses \ -e dTLB-store-misses \ -e instructions \ --timeout 60000" The output of the above command is discussed below before and after enabling the BPF prog pack allocator. The tests were run on qemu-system-riscv64 with 8 cpus, 16G memory. The rootfs was created using Bjorn's riscv-cross-builder[5] docker container linked below. Results ======= Before enabling prog pack allocator: ------------------------------------ Performance counter stats for 'system wide': 4939048 iTLB-load-misses 5468689 dTLB-load-misses 465234 dTLB-store-misses 1441082097998 instructions 60.045791200 seconds time elapsed After enabling prog pack allocator: ----------------------------------- Performance counter stats for 'system wide': 3430035 iTLB-load-misses 5008745 dTLB-load-misses 409944 dTLB-store-misses 1441535637988 instructions 60.046296600 seconds time elapsed Improvements in metrics ======================= It was expected that the iTLB-load-misses would decrease as now a single huge page is used to keep all the BPF programs compared to a single page for each program earlier. -------------------------------------------- The improvement in iTLB-load-misses: -30.5 % -------------------------------------------- I repeated this expriment more than 100 times in different setups and the improvement was always greater than 30%. This patch series is boot tested on the Starfive VisionFive 2 board[6]. The performance analysis was not done on the board because it doesn't expose iTLB-load-misses, etc. The stresser program was run on the board to test the loading and unloading of BPF programs [1] https://lore.kernel.org/bpf/20220204185742.271030-1-song@kernel.org/ [2] https://lore.kernel.org/all/20230626085811.3192402-1-puranjay12@gmail.com/ [3] https://lore.kernel.org/all/20230626085811.3192402-2-puranjay12@gmail.com/ [4] https://github.com/puranjaymohan/BPF-Allocator-Bench [5] https://github.com/bjoto/riscv-cross-builder [6] https://www.starfivetech.com/en/site/boards * b4-shazam-merge: bpf, riscv: use prog pack allocator in the BPF JIT riscv: implement a memset like function for text riscv: extend patch_text_nosync() for multiple pages bpf: make bpf_prog_pack allocator portable Link: https://lore.kernel.org/r/20230831131229.497941-1-puranjay12@gmail.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-09-08Merge patch series "riscv: Introduce KASLR"Palmer Dabbelt9-2/+129
Alexandre Ghiti <alexghiti@rivosinc.com> says: The following KASLR implementation allows to randomize the kernel mapping: - virtually: we expect the bootloader to provide a seed in the device-tree - physically: only implemented in the EFI stub, it relies on the firmware to provide a seed using EFI_RNG_PROTOCOL. arm64 has a similar implementation hence the patch 3 factorizes KASLR related functions for riscv to take advantage. The new virtual kernel location is limited by the early page table that only has one PUD and with the PMD alignment constraint, the kernel can only take < 512 positions. * b4-shazam-merge: riscv: libstub: Implement KASLR by using generic functions libstub: Fix compilation warning for rv32 arm64: libstub: Move KASLR handling functions to kaslr.c riscv: Dump out kernel offset information on panic riscv: Introduce virtual kernel mapping KASLR Link: https://lore.kernel.org/r/20230722123850.634544-1-alexghiti@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-09-08Merge patch "RISC-V: Add ptrace support for vectors"Palmer Dabbelt2-4/+88
This resurrects the vector ptrace() support that was removed for 6.5 due to some bugs cropping up as part of the GDB review process. * b4-shazam-merge: RISC-V: Add ptrace support for vectors Link: https://lore.kernel.org/r/20230825050248.32681-1-andy.chiu@sifive.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-09-08Merge patch series "Add non-coherent DMA support for AX45MP"Palmer Dabbelt12-0/+194
Prabhakar <prabhakar.csengg@gmail.com> says: From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> non-coherent DMA support for AX45MP ==================================== On the Andes AX45MP core, cache coherency is a specification option so it may not be supported. In this case DMA will fail. To get around with this issue this patch series does the below: 1] Andes alternative ports is implemented as errata which checks if the IOCP is missing and only then applies to CMO errata. One vendor specific SBI EXT (ANDES_SBI_EXT_IOCP_SW_WORKAROUND) is implemented as part of errata. Below are the configs which Andes port provides (and are selected by RZ/Five): - ERRATA_ANDES - ERRATA_ANDES_CMO OpenSBI patch supporting ANDES_SBI_EXT_IOCP_SW_WORKAROUND SBI is now part v1.3 release. 2] Andes AX45MP core has a Programmable Physical Memory Attributes (PMA) block that allows dynamic adjustment of memory attributes in the runtime. It contains a configurable amount of PMA entries implemented as CSR registers to control the attributes of memory locations in interest. OpenSBI configures the PMA regions as required and creates a reserve memory node and propagates it to the higher boot stack. Currently OpenSBI (upstream) configures the required PMA region and passes this a shared DMA pool to Linux. reserved-memory { #address-cells = <2>; #size-cells = <2>; ranges; pma_resv0@58000000 { compatible = "shared-dma-pool"; reg = <0x0 0x58000000 0x0 0x08000000>; no-map; linux,dma-default; }; }; The above shared DMA pool gets appended to Linux DTB so the DMA memory requests go through this region. 3] We provide callbacks to synchronize specific content between memory and cache. 4] RZ/Five SoC selects the below configs - AX45MP_L2_CACHE - DMA_GLOBAL_POOL - ERRATA_ANDES - ERRATA_ANDES_CMO ----------x---------------------x--------------------x---------------x---- * b4-shazam-merge: soc: renesas: Kconfig: Select the required configs for RZ/Five SoC cache: Add L2 cache management for Andes AX45MP RISC-V core dt-bindings: cache: andestech,ax45mp-cache: Add DT binding documentation for L2 cache controller riscv: mm: dma-noncoherent: nonstandard cache operations support riscv: errata: Add Andes alternative ports riscv: asm: vendorid_list: Add Andes Technology to the vendors list Link: https://lore.kernel.org/r/20230818135723.80612-1-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-09-08Merge patch series "riscv: dma-mapping: unify support for cache flushes"Palmer Dabbelt1-9/+51
Prabhakar <prabhakar.csengg@gmail.com> says: From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> This patch series is a subset from Arnd's original series [0]. Ive just picked up the bits required for RISC-V unification of cache flushing. Remaining patches from the series [0] will be taken care by Arnd soon. * b4-shazam-merge: riscv: dma-mapping: switch over to generic implementation riscv: dma-mapping: skip invalidation before bidirectional DMA riscv: dma-mapping: only invalidate after DMA, not flush Link: https://lore.kernel.org/r/20230816232336.164413-1-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-09-08Merge patch series "RISC-V: Probe for misaligned access speed"Palmer Dabbelt9-33/+193
Evan Green <evan@rivosinc.com> says: The current setting for the hwprobe bit indicating misaligned access speed is controlled by a vendor-specific feature probe function. This is essentially a per-SoC table we have to maintain on behalf of each vendor going forward. Let's convert that instead to something we detect at runtime. We have two assembly routines at the heart of our probe: one that does a bunch of word-sized accesses (without aligning its input buffer), and the other that does byte accesses. If we can move a larger number of bytes using misaligned word accesses than we can with the same amount of time doing byte accesses, then we can declare misaligned accesses as "fast". The tradeoff of reducing this maintenance burden is boot time. We spend 4-6 jiffies per core doing this measurement (0-2 on jiffie edge alignment, and 4 on measurement). The timing loop was based on raid6_choose_gen(), which uses (16+1)*N jiffies (where N is the number of algorithms). By taking only the fastest iteration out of all attempts for use in the comparison, variance between runs is very low. On my THead C906, it looks like this: [ 0.047563] cpu0: Ratio of byte access time to unaligned word access is 4.34, unaligned accesses are fast Several others have chimed in with results on slow machines with the older algorithm, which took all runs into account, including noise like interrupts. Even with this variation, results indicate that in all cases (fast, slow, and emulated) the measured numbers are nowhere near each other (always multiple factors away). * b4-shazam-merge: RISC-V: alternative: Remove feature_probe_func RISC-V: Probe for unaligned access speed Link: https://lore.kernel.org/r/20230818194136.4084400-1-evan@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-09-07Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds13-596/+1159
Pull kvm updates from Paolo Bonzini: "ARM: - Clean up vCPU targets, always returning generic v8 as the preferred target - Trap forwarding infrastructure for nested virtualization (used for traps that are taken from an L2 guest and are needed by the L1 hypervisor) - FEAT_TLBIRANGE support to only invalidate specific ranges of addresses when collapsing a table PTE to a block PTE. This avoids that the guest refills the TLBs again for addresses that aren't covered by the table PTE. - Fix vPMU issues related to handling of PMUver. - Don't unnecessary align non-stack allocations in the EL2 VA space - Drop HCR_VIRT_EXCP_MASK, which was never used... - Don't use smp_processor_id() in kvm_arch_vcpu_load(), but the cpu parameter instead - Drop redundant call to kvm_set_pfn_accessed() in user_mem_abort() - Remove prototypes without implementations RISC-V: - Zba, Zbs, Zicntr, Zicsr, Zifencei, and Zihpm support for guest - Added ONE_REG interface for SATP mode - Added ONE_REG interface to enable/disable multiple ISA extensions - Improved error codes returned by ONE_REG interfaces - Added KVM_GET_REG_LIST ioctl() implementation for KVM RISC-V - Added get-reg-list selftest for KVM RISC-V s390: - PV crypto passthrough enablement (Tony, Steffen, Viktor, Janosch) Allows a PV guest to use crypto cards. Card access is governed by the firmware and once a crypto queue is "bound" to a PV VM every other entity (PV or not) looses access until it is not bound anymore. Enablement is done via flags when creating the PV VM. - Guest debug fixes (Ilya) x86: - Clean up KVM's handling of Intel architectural events - Intel bugfixes - Add support for SEV-ES DebugSwap, allowing SEV-ES guests to use debug registers and generate/handle #DBs - Clean up LBR virtualization code - Fix a bug where KVM fails to set the target pCPU during an IRTE update - Fix fatal bugs in SEV-ES intrahost migration - Fix a bug where the recent (architecturally correct) change to reinject #BP and skip INT3 broke SEV guests (can't decode INT3 to skip it) - Retry APIC map recalculation if a vCPU is added/enabled - Overhaul emergency reboot code to bring SVM up to par with VMX, tie the "emergency disabling" behavior to KVM actually being loaded, and move all of the logic within KVM - Fix user triggerable WARNs in SVM where KVM incorrectly assumes the TSC ratio MSR cannot diverge from the default when TSC scaling is disabled up related code - Add a framework to allow "caching" feature flags so that KVM can check if the guest can use a feature without needing to search guest CPUID - Rip out the ancient MMU_DEBUG crud and replace the useful bits with CONFIG_KVM_PROVE_MMU - Fix KVM's handling of !visible guest roots to avoid premature triple fault injection - Overhaul KVM's page-track APIs, and KVMGT's usage, to reduce the API surface that is needed by external users (currently only KVMGT), and fix a variety of issues in the process Generic: - Wrap kvm_{gfn,hva}_range.pte in a union to allow mmu_notifier events to pass action specific data without needing to constantly update the main handlers. - Drop unused function declarations Selftests: - Add testcases to x86's sync_regs_test for detecting KVM TOCTOU bugs - Add support for printf() in guest code and covert all guest asserts to use printf-based reporting - Clean up the PMU event filter test and add new testcases - Include x86 selftests in the KVM x86 MAINTAINERS entry" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (279 commits) KVM: x86/mmu: Include mmu.h in spte.h KVM: x86/mmu: Use dummy root, backed by zero page, for !visible guest roots KVM: x86/mmu: Disallow guest from using !visible slots for page tables KVM: x86/mmu: Harden TDP MMU iteration against root w/o shadow page KVM: x86/mmu: Harden new PGD against roots without shadow pages KVM: x86/mmu: Add helper to convert root hpa to shadow page drm/i915/gvt: Drop final dependencies on KVM internal details KVM: x86/mmu: Handle KVM bookkeeping in page-track APIs, not callers KVM: x86/mmu: Drop @slot param from exported/external page-track APIs KVM: x86/mmu: Bug the VM if write-tracking is used but not enabled KVM: x86/mmu: Assert that correct locks are held for page write-tracking KVM: x86/mmu: Rename page-track APIs to reflect the new reality KVM: x86/mmu: Drop infrastructure for multiple page-track modes KVM: x86/mmu: Use page-track notifiers iff there are external users KVM: x86/mmu: Move KVM-only page-track declarations to internal header KVM: x86: Remove the unused page-track hook track_flush_slot() drm/i915/gvt: switch from ->track_flush_slot() to ->track_remove_region() KVM: x86: Add a new page-track hook to handle memslot deletion drm/i915/gvt: Don't bother removing write-protection on to-be-deleted slot KVM: x86: Reject memslot MOVE operations if KVMGT is attached ...
2023-09-06bpf, riscv: use prog pack allocator in the BPF JITPuranjay Mohan3-28/+141
Use bpf_jit_binary_pack_alloc() for memory management of JIT binaries in RISCV BPF JIT. The bpf_jit_binary_pack_alloc creates a pair of RW and RX buffers. The JIT writes the program into the RW buffer. When the JIT is done, the program is copied to the final RX buffer with bpf_jit_binary_pack_finalize. Implement bpf_arch_text_copy() and bpf_arch_text_invalidate() for RISCV JIT as these functions are required by bpf_jit_binary_pack allocator. Signed-off-by: Puranjay Mohan <puranjay12@gmail.com> Reviewed-by: Song Liu <song@kernel.org> Reviewed-by: Pu Lehui <pulehui@huawei.com> Acked-by: Björn Töpel <bjorn@kernel.org> Tested-by: Björn Töpel <bjorn@rivosinc.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/r/20230831131229.497941-5-puranjay12@gmail.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-09-06riscv: implement a memset like function for textPuranjay Mohan2-0/+78
The BPF JIT needs to write invalid instructions to RX regions of memory to invalidate removed BPF programs. This needs a function like memset() that can work with RX memory. Implement patch_text_set_nosync() which is similar to text_poke_set() of x86. Signed-off-by: Puranjay Mohan <puranjay12@gmail.com> Reviewed-by: Pu Lehui <pulehui@huawei.com> Acked-by: Björn Töpel <bjorn@kernel.org> Tested-by: Björn Töpel <bjorn@rivosinc.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/r/20230831131229.497941-4-puranjay12@gmail.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-09-06riscv: extend patch_text_nosync() for multiple pagesPuranjay Mohan1-5/+32
The patch_insn_write() function currently doesn't work for multiple pages of instructions, therefore patch_text_nosync() will fail with a page fault if called with lengths spanning multiple pages. This commit extends the patch_insn_write() function to support multiple pages by copying at max 2 pages at a time in a loop. This implementation is similar to text_poke_copy() function of x86. Signed-off-by: Puranjay Mohan <puranjay12@gmail.com> Reviewed-by: Pu Lehui <pulehui@huawei.com> Reviewed-by: Björn Töpel <bjorn@rivosinc.com> Tested-by: Björn Töpel <bjorn@rivosinc.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/r/20230831131229.497941-3-puranjay12@gmail.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-09-06riscv: libstub: Implement KASLR by using generic functionsAlexandre Ghiti2-0/+3
We can now use arm64 functions to handle the move of the kernel physical mapping: if KASLR is enabled, we will try to get a random seed from the firmware, if not possible, the kernel will be moved to a location that suits its alignment constraints. Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com> Tested-by: Conor Dooley <conor.dooley@microchip.com> Tested-by: Song Shuai <songshuaishuai@tinylab.org> Reviewed-by: Sami Tolvanen <samitolvanen@google.com> Tested-by: Sami Tolvanen <samitolvanen@google.com> Link: https://lore.kernel.org/r/20230722123850.634544-6-alexghiti@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-09-06riscv: Dump out kernel offset information on panicAlexandre Ghiti1-0/+25
Dump out the KASLR virtual kernel offset when panic to help debug kernel. Signed-off-by: Zong Li <zong.li@sifive.com> Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com> Tested-by: Conor Dooley <conor.dooley@microchip.com> Tested-by: Song Shuai <songshuaishuai@tinylab.org> Reviewed-by: Sami Tolvanen <samitolvanen@google.com> Tested-by: Sami Tolvanen <samitolvanen@google.com> Link: https://lore.kernel.org/r/20230722123850.634544-3-alexghiti@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-09-06riscv: Introduce virtual kernel mapping KASLRAlexandre Ghiti6-2/+101
KASLR implementation relies on a relocatable kernel so that we can move the kernel mapping. The seed needed to virtually move the kernel is taken from the device tree, so we rely on the bootloader to provide a correct seed. Zkr could be used unconditionnally instead if implemented, but that's for another patch. Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com> Tested-by: Conor Dooley <conor.dooley@microchip.com> Tested-by: Song Shuai <songshuaishuai@tinylab.org> Reviewed-by: Sami Tolvanen <samitolvanen@google.com> Tested-by: Sami Tolvanen <samitolvanen@google.com> Link: https://lore.kernel.org/r/20230722123850.634544-2-alexghiti@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-09-05Merge tag 'kbuild-v6.6' of ↵Linus Torvalds2-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: - Enable -Wenum-conversion warning option - Refactor the rpm-pkg target - Fix scripts/setlocalversion to consider annotated tags for rt-kernel - Add a jump key feature for the search menu of 'make nconfig' - Support Qt6 for 'make xconfig' - Enable -Wformat-overflow, -Wformat-truncation, -Wstringop-overflow, and -Wrestrict warnings for W=1 builds - Replace <asm/export.h> with <linux/export.h> for alpha, ia64, and sparc - Support DEB_BUILD_OPTIONS=parallel=N for the debian source package - Refactor scripts/Makefile.modinst and fix some modules_sign issues - Add a new Kconfig env variable to warn symbols that are not defined anywhere - Show help messages of config fragments in 'make help' * tag 'kbuild-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (62 commits) kconfig: fix possible buffer overflow kbuild: Show marked Kconfig fragments in "help" kconfig: add warn-unknown-symbols sanity check kbuild: dummy-tools: make MPROFILE_KERNEL checks work on BE Documentation/llvm: refresh docs modpost: Skip .llvm.call-graph-profile section check kbuild: support modules_sign for external modules as well kbuild: support 'make modules_sign' with CONFIG_MODULE_SIG_ALL=n kbuild: move more module installation code to scripts/Makefile.modinst kbuild: reduce the number of mkdir calls during modules_install kbuild: remove $(MODLIB)/source symlink kbuild: move depmod rule to scripts/Makefile.modinst kbuild: add modules_sign to no-{compiler,sync-config}-targets kbuild: do not run depmod for 'make modules_sign' kbuild: deb-pkg: support DEB_BUILD_OPTIONS=parallel=N in debian/rules alpha: remove <asm/export.h> alpha: replace #include <asm/export.h> with #include <linux/export.h> ia64: remove <asm/export.h> ia64: replace #include <asm/export.h> with #include <linux/export.h> sparc: remove <asm/export.h> ...
2023-09-03kbuild: Show marked Kconfig fragments in "help"Kees Cook2-0/+2
Currently the Kconfig fragments in kernel/configs and arch/*/configs that aren't used internally aren't discoverable through "make help", which consists of hard-coded lists of config fragments. Instead, list all the fragment targets that have a "# Help: " comment prefix so the targets can be generated dynamically. Add logic to the Makefile to search for and display the fragment and comment. Add comments to fragments that are intended to be direct targets. Signed-off-by: Kees Cook <keescook@chromium.org> Co-developed-by: Masahiro Yamada <masahiroy@kernel.org> Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc) Reviewed-by: Nicolas Schier <nicolas@fjasle.eu> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2023-09-01RISC-V: Add ptrace support for vectorsAndy Chiu2-4/+88
This patch add back the ptrace support with the following fix: - Define NT_RISCV_CSR and re-number NT_RISCV_VECTOR to prevent conflicting with gdb's NT_RISCV_CSR. - Use struct __riscv_v_regset_state to handle ptrace requests Since gdb does not directly include the note description header in Linux and has already defined NT_RISCV_CSR as 0x900, we decide to sync with gdb and renumber NT_RISCV_VECTOR to solve and prevent future conflicts. Fixes: 0c59922c769a ("riscv: Add ptrace vector support") Signed-off-by: Andy Chiu <andy.chiu@sifive.com> Link: https://lore.kernel.org/r/20230825050248.32681-1-andy.chiu@sifive.com [Palmer: Drop the unused "size" variable in riscv_vr_set().] Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-09-01riscv: mm: dma-noncoherent: nonstandard cache operations supportLad Prabhakar4-0/+91
Introduce support for nonstandard noncoherent systems in the RISC-V architecture. It enables function pointer support to handle cache management in such systems. This patch adds a new configuration option called "RISCV_NONSTANDARD_CACHE_OPS." This option is a boolean flag that depends on "RISCV_DMA_NONCOHERENT" and enables the function pointer support for cache management in nonstandard noncoherent systems. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Tested-by: Conor Dooley <conor.dooley@microchip.com> # tyre-kicking on a d1 Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com> Tested-by: Emil Renner Berthing <emil.renner.berthing@canonical.com> # Link: https://lore.kernel.org/r/20230818135723.80612-4-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-09-01riscv: errata: Add Andes alternative portsLad Prabhakar7-0/+102
Add required ports of the Alternative scheme for Andes CPU cores. I/O Coherence Port (IOCP) provides an AXI interface for connecting external non-caching masters, such as DMA controllers. IOCP is a specification option and is disabled on the Renesas RZ/Five SoC due to this reason cache management needs a software workaround. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Tested-by: Conor Dooley <conor.dooley@microchip.com> # tyre-kicking on a d1 Link: https://lore.kernel.org/r/20230818135723.80612-3-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-09-01riscv: asm: vendorid_list: Add Andes Technology to the vendors listLad Prabhakar1-0/+1
Add Andes Technology to the vendors list. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Conor Dooley <conor.dooley@microchip.com> # tyre-kicking on a d1 Link: https://lore.kernel.org/r/20230818135723.80612-2-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-09-01riscv: dma-mapping: switch over to generic implementationLad Prabhakar1-9/+51
Add helper functions for cache wback/inval/clean and use them arch_sync_dma_for_device()/arch_sync_dma_for_cpu() functions. The proposed changes are in preparation for switching over to generic implementation. Reorganization of the code is based on the patch (Link[0]) from Arnd. For now I have dropped CONFIG_ARCH_HAS_SYNC_DMA_FOR_CPU check as this will be enabled by default upon selection of RISCV_DMA_NONCOHERENT and also dropped arch_dma_mark_dcache_clean(). Link[0]: https://lore.kernel.org/all/20230327121317.4081816-22-arnd@kernel.org/ Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://lore.kernel.org/r/20230816232336.164413-4-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-09-01riscv: dma-mapping: skip invalidation before bidirectional DMAArnd Bergmann1-1/+1
For a DMA_BIDIRECTIONAL transfer, the caches have to be cleaned first to let the device see data written by the CPU, and invalidated after the transfer to let the CPU see data written by the device. riscv also invalidates the caches before the transfer, which does not appear to serve any purpose. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Acked-by: Palmer Dabbelt <palmer@rivosinc.com> Acked-by: Guo Ren <guoren@kernel.org> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://lore.kernel.org/r/20230816232336.164413-3-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-09-01riscv: dma-mapping: only invalidate after DMA, not flushArnd Bergmann1-1/+1
No other architecture intentionally writes back dirty cache lines into a buffer that a device has just finished writing into. If the cache is clean, this has no effect at all, but if a cacheline in the buffer has actually been written by the CPU, there is a driver bug that is likely made worse by overwriting that buffer. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Acked-by: Palmer Dabbelt <palmer@rivosinc.com> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://lore.kernel.org/r/20230816232336.164413-2-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-09-01RISC-V: alternative: Remove feature_probe_funcEvan Green4-33/+0
Now that we're testing unaligned memory copy and making that determination generically, there are no more users of the vendor feature_probe_func(). While I think it's probably going to need to come back, there are no users right now, so let's remove it until it's needed. Signed-off-by: Evan Green <evan@rivosinc.com> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20230818194136.4084400-3-evan@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-09-01RISC-V: Probe for unaligned access speedEvan Green6-0/+193
Rather than deferring unaligned access speed determinations to a vendor function, let's probe them and find out how fast they are. If we determine that an unaligned word access is faster than N byte accesses, mark the hardware's unaligned access as "fast". Otherwise, we mark accesses as slow. The algorithm itself runs for a fixed amount of jiffies. Within each iteration it attempts to time a single loop, and then keeps only the best (fastest) loop it saw. This algorithm was found to have lower variance from run to run than my first attempt, which counted the total number of iterations that could be done in that fixed amount of jiffies. By taking only the best iteration in the loop, assuming at least one loop wasn't perturbed by an interrupt, we eliminate the effects of interrupts and other "warm up" factors like branch prediction. The only downside is it depends on having an rdtime granular and accurate enough to measure a single copy. If we ever manage to complete a loop in 0 rdtime ticks, we leave the unaligned setting at UNKNOWN. There is a slight change in user-visible behavior here. Previously, all boards except the THead C906 reported misaligned access speed of UNKNOWN. C906 reported FAST. With this change, since we're now measuring misaligned access speed on each hart, all RISC-V systems will have this key set as either FAST or SLOW. Currently, we don't have a way to confidently measure the difference between SLOW and EMULATED, so we label anything not fast as SLOW. This will mislabel some systems that are actually EMULATED as SLOW. When we get support for delegating misaligned access traps to the kernel (as opposed to the firmware quietly handling it), we can explicitly test in Linux to see if unaligned accesses trap. Those systems will start to report EMULATED, though older (today's) systems without that new SBI mechanism will continue to report SLOW. I've updated the documentation for those hwprobe values to reflect this, specifically: SLOW may or may not be emulated by software, and FAST represents means being faster than equivalent byte accesses. The change in documentation is accurate with respect to both the former and current behavior. Signed-off-by: Evan Green <evan@rivosinc.com> Acked-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20230818194136.4084400-2-evan@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-09-01Merge tag 'riscv-for-linus-6.6-mw1' of ↵Linus Torvalds36-356/+1008
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull RISC-V updates from Palmer Dabbelt: - Support for the new "riscv,isa-extensions" and "riscv,isa-base" device tree interfaces for probing extensions - Support for userspace access to the performance counters - Support for more instructions in kprobes - Crash kernels can be allocated above 4GiB - Support for KCFI - Support for ELFs in !MMU configurations - ARCH_KMALLOC_MINALIGN has been reduced to 8 - mmap() defaults to sv48-sized addresses, with longer addresses hidden behind a hint (similar to Arm and Intel) - Also various fixes and cleanups * tag 'riscv-for-linus-6.6-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (51 commits) lib/Kconfig.debug: Restrict DEBUG_INFO_SPLIT for RISC-V riscv: support PREEMPT_DYNAMIC with static keys riscv: Move create_tmp_mapping() to init sections riscv: Mark KASAN tmp* page tables variables as static riscv: mm: use bitmap_zero() API riscv: enable DEBUG_FORCE_FUNCTION_ALIGN_64B riscv: remove redundant mv instructions RISC-V: mm: Document mmap changes RISC-V: mm: Update pgtable comment documentation RISC-V: mm: Add tests for RISC-V mm RISC-V: mm: Restrict address space for sv39,sv48,sv57 riscv: enable DMA_BOUNCE_UNALIGNED_KMALLOC for !dma_coherent riscv: allow kmalloc() caches aligned to the smallest value riscv: support the elf-fdpic binfmt loader binfmt_elf_fdpic: support 64-bit systems riscv: Allow CONFIG_CFI_CLANG to be selected riscv/purgatory: Disable CFI riscv: Add CFI error handling riscv: Add ftrace_stub_graph riscv: Add types to indirectly called assembly functions ...
2023-08-31Merge tag 'x86_shstk_for_6.6-rc1' of ↵Linus Torvalds1-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 shadow stack support from Dave Hansen: "This is the long awaited x86 shadow stack support, part of Intel's Control-flow Enforcement Technology (CET). CET consists of two related security features: shadow stacks and indirect branch tracking. This series implements just the shadow stack part of this feature, and just for userspace. The main use case for shadow stack is providing protection against return oriented programming attacks. It works by maintaining a secondary (shadow) stack using a special memory type that has protections against modification. When executing a CALL instruction, the processor pushes the return address to both the normal stack and to the special permission shadow stack. Upon RET, the processor pops the shadow stack copy and compares it to the normal stack copy. For more information, refer to the links below for the earlier versions of this patch set" Link: https://lore.kernel.org/lkml/20220130211838.8382-1-rick.p.edgecombe@intel.com/ Link: https://lore.kernel.org/lkml/20230613001108.3040476-1-rick.p.edgecombe@intel.com/ * tag 'x86_shstk_for_6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (47 commits) x86/shstk: Change order of __user in type x86/ibt: Convert IBT selftest to asm x86/shstk: Don't retry vm_munmap() on -EINTR x86/kbuild: Fix Documentation/ reference x86/shstk: Move arch detail comment out of core mm x86/shstk: Add ARCH_SHSTK_STATUS x86/shstk: Add ARCH_SHSTK_UNLOCK x86: Add PTRACE interface for shadow stack selftests/x86: Add shadow stack test x86/cpufeatures: Enable CET CR4 bit for shadow stack x86/shstk: Wire in shadow stack interface x86: Expose thread features in /proc/$PID/status x86/shstk: Support WRSS for userspace x86/shstk: Introduce map_shadow_stack syscall x86/shstk: Check that signal frame is shadow stack mem x86/shstk: Check that SSP is aligned on sigreturn x86/shstk: Handle signals for shadow stack x86/shstk: Introduce routines modifying shstk x86/shstk: Handle thread shadow stack x86/shstk: Add user-mode shadow stack support ...
2023-08-31Merge tag 'kvm-riscv-6.6-1' of https://github.com/kvm-riscv/linux into HEADPaolo Bonzini12-589/+1158
KVM/riscv changes for 6.6 - Zba, Zbs, Zicntr, Zicsr, Zifencei, and Zihpm support for Guest/VM - Added ONE_REG interface for SATP mode - Added ONE_REG interface to enable/disable multiple ISA extensions - Improved error codes returned by ONE_REG interfaces - Added KVM_GET_REG_LIST ioctl() implementation for KVM RISC-V - Added get-reg-list selftest for KVM RISC-V
2023-08-31Merge tag 'kvm-x86-generic-6.6' of https://github.com/kvm-x86/linux into HEADPaolo Bonzini1-1/+1
Common KVM changes for 6.6: - Wrap kvm_{gfn,hva}_range.pte in a union to allow mmu_notifier events to pass action specific data without needing to constantly update the main handlers. - Drop unused function declarations
2023-08-31Merge tag 'kvmarm-6.6' of ↵Paolo Bonzini1-6/+0
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD KVM/arm64 updates for Linux 6.6 - Add support for TLB range invalidation of Stage-2 page tables, avoiding unnecessary invalidations. Systems that do not implement range invalidation still rely on a full invalidation when dealing with large ranges. - Add infrastructure for forwarding traps taken from a L2 guest to the L1 guest, with L0 acting as the dispatcher, another baby step towards the full nested support. - Simplify the way we deal with the (long deprecated) 'CPU target', resulting in a much needed cleanup. - Fix another set of PMU bugs, both on the guest and host sides, as we seem to never have any shortage of those... - Relax the alignment requirements of EL2 VA allocations for non-stack allocations, as we were otherwise wasting a lot of that precious VA space. - The usual set of non-functional cleanups, although I note the lack of spelling fixes...
2023-08-31Merge patch series "RISC-V: mm: Make SV48 the default address space"Palmer Dabbelt3-12/+75
Charlie Jenkins <charlie@rivosinc.com> says: Make sv48 the default address space for mmap as some applications currently depend on this assumption. Users can now select a desired address space using a non-zero hint address to mmap. Previously, requesting the default address space from mmap by passing zero as the hint address would result in using the largest address space possible. Some applications depend on empty bits in the virtual address space, like Go and Java, so this patch provides more flexibility for application developers. * b4-shazam-merge: RISC-V: mm: Document mmap changes RISC-V: mm: Update pgtable comment documentation RISC-V: mm: Add tests for RISC-V mm RISC-V: mm: Restrict address space for sv39,sv48,sv57 Link: https://lore.kernel.org/r/20230809232218.849726-1-charlie@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-08-31Merge patch series "riscv: Reduce ARCH_KMALLOC_MINALIGN to 8"Palmer Dabbelt5-0/+26
Jisheng Zhang <jszhang@kernel.org> says: Currently, riscv defines ARCH_DMA_MINALIGN as L1_CACHE_BYTES, I.E 64Bytes, if CONFIG_RISCV_DMA_NONCOHERENT=y. To support unified kernel Image, usually we have to enable CONFIG_RISCV_DMA_NONCOHERENT, thus it brings some bad effects to coherent platforms: Firstly, it wastes memory, kmalloc-96, kmalloc-32, kmalloc-16 and kmalloc-8 slab caches don't exist any more, they are replaced with either kmalloc-128 or kmalloc-64. Secondly, larger than necessary kmalloc aligned allocations results in unnecessary cache/TLB pressure. This issue also exists on arm64 platforms. From last year, Catalin tried to solve this issue by decoupling ARCH_KMALLOC_MINALIGN from ARCH_DMA_MINALIGN, limiting kmalloc() minimum alignment to dma_get_cache_alignment() and replacing ARCH_KMALLOC_MINALIGN usage in various drivers with ARCH_DMA_MINALIGN etc.[1] One fact we can make use of for riscv: if the CPU doesn't support ZICBOM or T-HEAD CMO, we know the platform is coherent. Based on Catalin's work and above fact, we can easily solve the kmalloc align issue for riscv: we can override dma_get_cache_alignment(), then let it return ARCH_DMA_MINALIGN at the beginning and return 1 once we know the underlying HW neither supports ZICBOM nor supports T-HEAD CMO. So what about if the CPU supports ZICBOM or T-HEAD CMO, but all the devices are dma coherent? Well, we use ARCH_DMA_MINALIGN as the kmalloc minimum alignment, nothing changed in this case. This case can be improved in the future once we see such platforms in mainline. After this patch, a simple test of booting to a small buildroot rootfs on qemu shows: kmalloc-96 5041 5041 96 ... kmalloc-64 9606 9606 64 ... kmalloc-32 5128 5128 32 ... kmalloc-16 7682 7682 16 ... kmalloc-8 10246 10246 8 ... So we save about 1268KB memory. The saving will be much larger in normal OS env on real HW platforms. patch1 allows kmalloc() caches aligned to the smallest value. patch2 enables DMA_BOUNCE_UNALIGNED_KMALLOC. After this series: As for coherent platforms, kmalloc-{8,16,32,96} caches come back on coherent both RV32 and RV64 platforms, I.E !ZICBOM and !THEAD_CMO. As for noncoherent RV32 platforms, nothing changed. As for noncoherent RV64 platforms, I.E either ZICBOM or THEAD_CMO, the above kmalloc caches also come back if > 4GB memory or users pass "swiotlb=mmnn,force" to force swiotlb creation if <= 4GB memory. How much mmnn should be depends on the specific platform, it needs to be tried and tested all possible usage case on the specific hardware. For example, I can use the minimal I/O TLB slabs on Sipeed M1S Dock. * b4-shazam-merge: riscv: enable DMA_BOUNCE_UNALIGNED_KMALLOC for !dma_coherent riscv: allow kmalloc() caches aligned to the smallest value Link: https://lore.kernel.org/linux-arm-kernel/20230524171904.3967031-1-catalin.marinas@arm.com/ [1] Link: https://lore.kernel.org/r/20230718152214.2907-1-jszhang@kernel.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-08-31riscv: support PREEMPT_DYNAMIC with static keysJisheng Zhang1-0/+1
Currently, each architecture can support PREEMPT_DYNAMIC through either static calls or static keys. To support PREEMPT_DYNAMIC on riscv, we face three choices: 1. only add static calls support to riscv As Mark pointed out in commit 99cf983cc8bc ("sched/preempt: Add PREEMPT_DYNAMIC using static keys"), static keys "...should have slightly lower overhead than non-inline static calls, as this effectively inlines each trampoline into the start of its callee. This may avoid redundant work, and may integrate better with CFI schemes." So even we add static calls(without inline static calls) to riscv, static keys is still a better choice. 2. add static calls and inline static calls to riscv Per my understanding, inline static calls requires objtool support which is not easy. 3. use static keys While riscv doesn't have static calls support, it supports static keys perfectly. So this patch selects HAVE_PREEMPT_DYNAMIC_KEY to enable support for PREEMPT_DYNAMIC on riscv, so that the preemption model can be chosen at boot time. It also patches asm-generic/preempt.h, mainly to add __preempt_schedule() and __preempt_schedule_notrace() macros for PREEMPT_DYNAMIC case. Other architectures which use generic preempt.h can also benefit from this patch by simply selecting HAVE_PREEMPT_DYNAMIC_KEY to enable PREEMPT_DYNAMIC if they supports static keys. Signed-off-by: Jisheng Zhang <jszhang@kernel.org> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20230716164925.1858-1-jszhang@kernel.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-08-31Merge patch series "riscv: support ELF format binaries in nommu mode"Palmer Dabbelt3-1/+19
Greg Ungerer <gerg@kernel.org> says: The following changes add the ability to run ELF format binaries when running RISC-V in nommu mode. That support is actually part of the ELF-FDPIC loader, so these changes are all about making that work on RISC-V. The first issue to deal with is making the ELF-FDPIC loader capable of handling 64-bit ELF files. As coded right now it only supports 32-bit ELF files. Secondly some changes are required to enable and compile the ELF-FDPIC loader on RISC-V and to pass the ELF-FDPIC mapping addresses through to user space when execing the new program. These changes have not been used to run actual ELF-FDPIC binaries. It is used to load and run normal ELF - compiled -pie format. Though the underlying changes are expected to work with full ELF-FDPIC binaries if or when that is supported on RISC-V in gcc. To avoid needing changes to the C-library (tested with uClibc-ng currently) there is a simple runtime dynamic loader (interpreter) available to do the final relocations, https://github.com/gregungerer/uldso. The nice thing about doing it this way is that the same program binary can also be loaded with the usual ELF loader in MMU linux. The motivation here is to provide an easy to use alternative to the flat format binaries normally used for RISC-V nommu based systems. * b4-shazam-merge: riscv: support the elf-fdpic binfmt loader binfmt_elf_fdpic: support 64-bit systems Link: https://lore.kernel.org/r/20230711130754.481209-1-gerg@kernel.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-08-31Merge patch series "riscv: KCFI support"Palmer Dabbelt14-12/+238
Sami Tolvanen <samitolvanen@google.com> says: This series adds KCFI support for RISC-V. KCFI is a fine-grained forward-edge control-flow integrity scheme supported in Clang >=16, which ensures indirect calls in instrumented code can only branch to functions whose type matches the function pointer type, thus making code reuse attacks more difficult. Patch 1 implements a pt_regs based syscall wrapper to address function pointer type mismatches in syscall handling. Patches 2 and 3 annotate indirectly called assembly functions with CFI types. Patch 4 implements error handling for indirect call checks. Patch 5 disables CFI for arch/riscv/purgatory. Patch 6 finally allows CONFIG_CFI_CLANG to be enabled for RISC-V. Note that Clang 16 has a generic architecture-agnostic KCFI implementation, which does work with the kernel, but doesn't produce a stable code sequence for indirect call checks, which means potential failures just trap and won't result in informative error messages. Clang 17 includes a RISC-V specific back-end implementation for KCFI, which emits a predictable code sequence for the checks and a .kcfi_traps section with locations of the traps, which patch 5 uses to produce more useful errors. The type mismatch fixes and annotations in the first three patches also become necessary in future if the kernel decides to support fine-grained CFI implemented using the hardware landing pad feature proposed in the in-progress Zicfisslp extension. Once the specification is ratified and hardware support emerges, implementing runtime patching support that replaces KCFI instrumentation with Zicfisslp landing pads might also be feasible (similarly to KCFI to FineIBT patching on x86_64), allowing distributions to ship a unified kernel binary for all devices. * b4-shazam-merge: riscv: Allow CONFIG_CFI_CLANG to be selected riscv/purgatory: Disable CFI riscv: Add CFI error handling riscv: Add ftrace_stub_graph riscv: Add types to indirectly called assembly functions riscv: Implement syscall wrappers Link: https://lore.kernel.org/r/20230710183544.999540-8-samitolvanen@google.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-08-31riscv: Move create_tmp_mapping() to init sectionsAlexandre Ghiti1-1/+1
This function is only used at boot time so mark it as __init. Fixes: 96f9d4daf745 ("riscv: Rework kasan population functions") Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com> Link: https://lore.kernel.org/r/20230704074357.233982-2-alexghiti@rivosinc.com Cc: stable@vger.kernel.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-08-31riscv: Mark KASAN tmp* page tables variables as staticAlexandre Ghiti1-3/+3
tmp_pg_dir, tmp_p4d and tmp_pud are only used in kasan_init.c so they should be declared as static. Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202306282202.bODptiGE-lkp@intel.com/ Fixes: 96f9d4daf745 ("riscv: Rework kasan population functions") Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com> Link: https://lore.kernel.org/r/20230704074357.233982-1-alexghiti@rivosinc.com Cc: stable@vger.kernel.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-08-31riscv: mm: use bitmap_zero() APIYe Xingchen1-1/+1
bitmap_zero() is faster than bitmap_clear(), so use bitmap_zero() instead of bitmap_clear(). Signed-off-by: Ye Xingchen <ye.xingchen@zte.com.cn> Reviewed-by: Anup Patel <anup@brainfault.org> Link: https://lore.kernel.org/r/202305061711417142802@zte.com.cn Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-08-31Merge patch series "support allocating crashkernel above 4G explicitly on riscv"Palmer Dabbelt2-7/+91
Chen Jiahao <chenjiahao16@huawei.com> says: On riscv, the current crash kernel allocation logic is trying to allocate within 32bit addressible memory region by default, if failed, try to allocate without 4G restriction. In need of saving DMA zone memory while allocating a relatively large crash kernel region, allocating the reserved memory top down in high memory, without overlapping the DMA zone, is a mature solution. Hence this patchset introduces the parameter option crashkernel=X,[high,low]. One can reserve the crash kernel from high memory above DMA zone range by explicitly passing "crashkernel=X,high"; or reserve a memory range below 4G with "crashkernel=X,low". Besides, there are few rules need to take notice: 1. "crashkernel=X,[high,low]" will be ignored if "crashkernel=size" is specified. 2. "crashkernel=X,low" is valid only when "crashkernel=X,high" is passed and there is enough memory to be allocated under 4G. 3. When allocating crashkernel above 4G and no "crashkernel=X,low" is specified, a 128M low memory will be allocated automatically for swiotlb bounce buffer. See Documentation/admin-guide/kernel-parameters.txt for more information. To verify loading the crashkernel, adapted kexec-tools is attached below: https://github.com/chenjh005/kexec-tools/tree/build-test-riscv-v2 Following test cases have been performed as expected: 1) crashkernel=256M //low=256M 2) crashkernel=1G //low=1G 3) crashkernel=4G //high=4G, low=128M(default) 4) crashkernel=4G crashkernel=256M,high //high=4G, low=128M(default), high is ignored 5) crashkernel=4G crashkernel=256M,low //high=4G, low=128M(default), low is ignored 6) crashkernel=4G,high //high=4G, low=128M(default) 7) crashkernel=256M,low //low=0M, invalid 8) crashkernel=4G,high crashkernel=256M,low //high=4G, low=256M 9) crashkernel=4G,high crashkernel=4G,low //high=0M, low=0M, invalid 10) crashkernel=512M@0xd0000000 //low=512M 11) crashkernel=1G,high crashkernel=0M,low //high=1G, low=0M * b4-shazam-merge: docs: kdump: Update the crashkernel description for riscv riscv: kdump: Implement crashkernel=X,[high,low] Link: https://lore.kernel.org/r/20230726175000.2536220-1-chenjiahao16@huawei.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-08-31Merge patch series "riscv: kprobes: simulate some instructions"Palmer Dabbelt3-5/+116
Nam Cao <namcaov@gmail.com> says: Simulate some currently rejected instructions. Still to be simulated are: - c.jal - c.ebreak * b4-shazam-merge: riscv: kprobes: simulate c.beqz and c.bnez riscv: kprobes: simulate c.jr and c.jalr instructions riscv: kprobes: simulate c.j instruction Link: https://lore.kernel.org/r/cover.1690704360.git.namcaov@gmail.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-08-31riscv: remove redundant mv instructionsNam Cao1-5/+1
Some mv instructions were useful when first introduced to preserve a0 and a1 before function calls. However the code has changed and they are now redundant. Remove them. Signed-off-by: Nam Cao <namcaov@gmail.com> Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com> Link: https://lore.kernel.org/r/20230725053835.138910-1-namcaov@gmail.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-08-31Merge tag 'devicetree-header-cleanups-for-6.6' of ↵Linus Torvalds1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree include cleanups from Rob Herring: "These are the remaining few clean-ups of DT related includes which didn't get applied to subsystem trees" * tag 'devicetree-header-cleanups-for-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: ipmi: Explicitly include correct DT includes tpm: Explicitly include correct DT includes lib/genalloc: Explicitly include correct DT includes parport: Explicitly include correct DT includes sbus: Explicitly include correct DT includes mux: Explicitly include correct DT includes macintosh: Explicitly include correct DT includes hte: Explicitly include correct DT includes EDAC: Explicitly include correct DT includes clocksource: Explicitly include correct DT includes sparc: Explicitly include correct DT includes riscv: Explicitly include correct DT includes
2023-08-31Merge tag 'soc-dt-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds13-6/+983
Pull ARM devicetree updates from Arnd Bergmann: "These are the devicetree updates for Arm and RISC-V based SoCs, mainly from Qualcomm, NXP/Freescale, Aspeed, TI, Rockchips, Samsung, ST and Starfive. Only a few new SoC got added: - TI AM62P5, a variant of the existing Sitara AM62x family - Intel Agilex5, an FPGFA platform that includes an Cortex-A76/A55 SoC. - Qualcomm ipq5018 is used in wireless access points - Qualcomm SM4450 (Snapdragon 4 Gen 2) is a new low-end mobile phone platform. In total, 29 machines get added, which is low because of the summer break. These cover SoCs from Aspeed, Broadcom, NXP, Samsung, ST, Allwinner, Amlogic, Intel, Qualcomm, Rockchip, TI and T-Head. Most of these are development and reference boards. Despite not adding a lot of new machines, there are over 700 patches in total, most of which are cleanups and minor fixes" * tag 'soc-dt-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (735 commits) arm64: dts: use capital "OR" for multiple licenses in SPDX ARM: dts: use capital "OR" for multiple licenses in SPDX arm64: dts: qcom: sdm845-db845c: Mark cont splash memory region as reserved ARM: dts: qcom: apq8064: add support to gsbi4 uart riscv: dts: change TH1520 files to dual license riscv: dts: thead: add BeagleV Ahead board device tree dt-bindings: riscv: Add BeagleV Ahead board compatibles ARM: dts: stm32: add SCMI PMIC regulators on stm32mp135f-dk board ARM: dts: stm32: STM32MP13x SoC exposes SCMI regulators dt-bindings: rcc: stm32: add STM32MP13 SCMI regulators IDs ARM: dts: stm32: support display on stm32f746-disco board ARM: dts: stm32: rename mmc_vcard to vcc-3v3 on stm32f746-disco ARM: dts: stm32: add pin map for LTDC on stm32f7 ARM: dts: stm32: add ltdc support on stm32f746 MCU arm64: dts: qcom: sm6350: Hook up PDC as wakeup-parent of TLMM arm64: dts: qcom: sdm670: Hook up PDC as wakeup-parent of TLMM arm64: dts: qcom: sa8775p: Hook up PDC as wakeup-parent of TLMM arm64: dts: qcom: sc8280xp: Hook up PDC as wakeup-parent of TLMM arm64: dts: qcom: sdm670: Add PDC riscv: dts: starfive: fix jh7110 qspi sort order ...
2023-08-30Merge tag 'mm-nonmm-stable-2023-08-28-22-48' of ↵Linus Torvalds5-37/+19
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull non-MM updates from Andrew Morton: - An extensive rework of kexec and crash Kconfig from Eric DeVolder ("refactor Kconfig to consolidate KEXEC and CRASH options") - kernel.h slimming work from Andy Shevchenko ("kernel.h: Split out a couple of macros to args.h") - gdb feature work from Kuan-Ying Lee ("Add GDB memory helper commands") - vsprintf inclusion rationalization from Andy Shevchenko ("lib/vsprintf: Rework header inclusions") - Switch the handling of kdump from a udev scheme to in-kernel handling, by Eric DeVolder ("crash: Kernel handling of CPU and memory hot un/plug") - Many singleton patches to various parts of the tree * tag 'mm-nonmm-stable-2023-08-28-22-48' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (81 commits) document while_each_thread(), change first_tid() to use for_each_thread() drivers/char/mem.c: shrink character device's devlist[] array x86/crash: optimize CPU changes crash: change crash_prepare_elf64_headers() to for_each_possible_cpu() crash: hotplug support for kexec_load() x86/crash: add x86 crash hotplug support crash: memory and CPU hotplug sysfs attributes kexec: exclude elfcorehdr from the segment digest crash: add generic infrastructure for crash hotplug support crash: move a few code bits to setup support of crash hotplug kstrtox: consistently use _tolower() kill do_each_thread() nilfs2: fix WARNING in mark_buffer_dirty due to discarded buffer reuse scripts/bloat-o-meter: count weak symbol sizes treewide: drop CONFIG_EMBEDDED lockdep: fix static memory detection even more lib/vsprintf: declare no_hash_pointers in sprintf.h lib/vsprintf: split out sprintf() and friends kernel/fork: stop playing lockless games for exe_file replacement adfs: delete unused "union adfs_dirtail" definition ...
2023-08-30Merge tag 'mm-stable-2023-08-28-18-26' of ↵Linus Torvalds8-58/+55
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull MM updates from Andrew Morton: - Some swap cleanups from Ma Wupeng ("fix WARN_ON in add_to_avail_list") - Peter Xu has a series (mm/gup: Unify hugetlb, speed up thp") which reduces the special-case code for handling hugetlb pages in GUP. It also speeds up GUP handling of transparent hugepages. - Peng Zhang provides some maple tree speedups ("Optimize the fast path of mas_store()"). - Sergey Senozhatsky has improved te performance of zsmalloc during compaction (zsmalloc: small compaction improvements"). - Domenico Cerasuolo has developed additional selftest code for zswap ("selftests: cgroup: add zswap test program"). - xu xin has doe some work on KSM's handling of zero pages. These changes are mainly to enable the user to better understand the effectiveness of KSM's treatment of zero pages ("ksm: support tracking KSM-placed zero-pages"). - Jeff Xu has fixes the behaviour of memfd's MEMFD_NOEXEC_SCOPE_NOEXEC_ENFORCED sysctl ("mm/memfd: fix sysctl MEMFD_NOEXEC_SCOPE_NOEXEC_ENFORCED"). - David Howells has fixed an fscache optimization ("mm, netfs, fscache: Stop read optimisation when folio removed from pagecache"). - Axel Rasmussen has given userfaultfd the ability to simulate memory poisoning ("add UFFDIO_POISON to simulate memory poisoning with UFFD"). - Miaohe Lin has contributed some routine maintenance work on the memory-failure code ("mm: memory-failure: remove unneeded PageHuge() check"). - Peng Zhang has contributed some maintenance work on the maple tree code ("Improve the validation for maple tree and some cleanup"). - Hugh Dickins has optimized the collapsing of shmem or file pages into THPs ("mm: free retracted page table by RCU"). - Jiaqi Yan has a patch series which permits us to use the healthy subpages within a hardware poisoned huge page for general purposes ("Improve hugetlbfs read on HWPOISON hugepages"). - Kemeng Shi has done some maintenance work on the pagetable-check code ("Remove unused parameters in page_table_check"). - More folioification work from Matthew Wilcox ("More filesystem folio conversions for 6.6"), ("Followup folio conversions for zswap"). And from ZhangPeng ("Convert several functions in page_io.c to use a folio"). - page_ext cleanups from Kemeng Shi ("minor cleanups for page_ext"). - Baoquan He has converted some architectures to use the GENERIC_IOREMAP ioremap()/iounmap() code ("mm: ioremap: Convert architectures to take GENERIC_IOREMAP way"). - Anshuman Khandual has optimized arm64 tlb shootdown ("arm64: support batched/deferred tlb shootdown during page reclamation/migration"). - Better maple tree lockdep checking from Liam Howlett ("More strict maple tree lockdep"). Liam also developed some efficiency improvements ("Reduce preallocations for maple tree"). - Cleanup and optimization to the secondary IOMMU TLB invalidation, from Alistair Popple ("Invalidate secondary IOMMU TLB on permission upgrade"). - Ryan Roberts fixes some arm64 MM selftest issues ("selftests/mm fixes for arm64"). - Kemeng Shi provides some maintenance work on the compaction code ("Two minor cleanups for compaction"). - Some reduction in mmap_lock pressure from Matthew Wilcox ("Handle most file-backed faults under the VMA lock"). - Aneesh Kumar contributes code to use the vmemmap optimization for DAX on ppc64, under some circumstances ("Add support for DAX vmemmap optimization for ppc64"). - page-ext cleanups from Kemeng Shi ("add page_ext_data to get client data in page_ext"), ("minor cleanups to page_ext header"). - Some zswap cleanups from Johannes Weiner ("mm: zswap: three cleanups"). - kmsan cleanups from ZhangPeng ("minor cleanups for kmsan"). - VMA handling cleanups from Kefeng Wang ("mm: convert to vma_is_initial_heap/stack()"). - DAMON feature work from SeongJae Park ("mm/damon/sysfs-schemes: implement DAMOS tried total bytes file"), ("Extend DAMOS filters for address ranges and DAMON monitoring targets"). - Compaction work from Kemeng Shi ("Fixes and cleanups to compaction"). - Liam Howlett has improved the maple tree node replacement code ("maple_tree: Change replacement strategy"). - ZhangPeng has a general code cleanup - use the K() macro more widely ("cleanup with helper macro K()"). - Aneesh Kumar brings memmap-on-memory to ppc64 ("Add support for memmap on memory feature on ppc64"). - pagealloc cleanups from Kemeng Shi ("Two minor cleanups for pcp list in page_alloc"), ("Two minor cleanups for get pageblock migratetype"). - Vishal Moola introduces a memory descriptor for page table tracking, "struct ptdesc" ("Split ptdesc from struct page"). - memfd selftest maintenance work from Aleksa Sarai ("memfd: cleanups for vm.memfd_noexec"). - MM include file rationalization from Hugh Dickins ("arch: include asm/cacheflush.h in asm/hugetlb.h"). - THP debug output fixes from Hugh Dickins ("mm,thp: fix sloppy text output"). - kmemleak improvements from Xiaolei Wang ("mm/kmemleak: use object_cache instead of kmemleak_initialized"). - More folio-related cleanups from Matthew Wilcox ("Remove _folio_dtor and _folio_order"). - A VMA locking scalability improvement from Suren Baghdasaryan ("Per-VMA lock support for swap and userfaults"). - pagetable handling cleanups from Matthew Wilcox ("New page table range API"). - A batch of swap/thp cleanups from David Hildenbrand ("mm/swap: stop using page->private on tail pages for THP_SWAP + cleanups"). - Cleanups and speedups to the hugetlb fault handling from Matthew Wilcox ("Change calling convention for ->huge_fault"). - Matthew Wilcox has also done some maintenance work on the MM subsystem documentation ("Improve mm documentation"). * tag 'mm-stable-2023-08-28-18-26' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (489 commits) maple_tree: shrink struct maple_tree maple_tree: clean up mas_wr_append() secretmem: convert page_is_secretmem() to folio_is_secretmem() nios2: fix flush_dcache_page() for usage from irq context hugetlb: add documentation for vma_kernel_pagesize() mm: add orphaned kernel-doc to the rst files. mm: fix clean_record_shared_mapping_range kernel-doc mm: fix get_mctgt_type() kernel-doc mm: fix kernel-doc warning from tlb_flush_rmaps() mm: remove enum page_entry_size mm: allow ->huge_fault() to be called without the mmap_lock held mm: move PMD_ORDER to pgtable.h mm: remove checks for pte_index memcg: remove duplication detection for mem_cgroup_uncharge_swap mm/huge_memory: work on folio->swap instead of page->private when splitting folio mm/swap: inline folio_set_swap_entry() and folio_swap_entry() mm/swap: use dedicated entry for swap in folio mm/swap: stop using page->private on tail pages for THP_SWAP selftests/mm: fix WARNING comparing pointer to 0 selftests: cgroup: fix test_kmem_memcg_deletion kernel mem check ...
2023-08-29Merge tag 'net-next-6.6' of ↵Linus Torvalds2-93/+192
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Paolo Abeni: "Core: - Increase size limits for to-be-sent skb frag allocations. This allows tun, tap devices and packet sockets to better cope with large writes operations - Store netdevs in an xarray, to simplify iterating over netdevs - Refactor nexthop selection for multipath routes - Improve sched class lifetime handling - Add backup nexthop ID support for bridge - Implement drop reasons support in openvswitch - Several data races annotations and fixes - Constify the sk parameter of routing functions - Prepend kernel version to netconsole message Protocols: - Implement support for TCP probing the peer being under memory pressure - Remove hard coded limitation on IPv6 specific info placement inside the socket struct - Get rid of sysctl_tcp_adv_win_scale and use an auto-estimated per socket scaling factor - Scaling-up the IPv6 expired route GC via a separated list of expiring routes - In-kernel support for the TLS alert protocol - Better support for UDP reuseport with connected sockets - Add NEXT-C-SID support for SRv6 End.X behavior, reducing the SR header size - Get rid of additional ancillary per MPTCP connection struct socket - Implement support for BPF-based MPTCP packet schedulers - Format MPTCP subtests selftests results in TAP - Several new SMC 2.1 features including unique experimental options, max connections per lgr negotiation, max links per lgr negotiation BPF: - Multi-buffer support in AF_XDP - Add multi uprobe BPF links for attaching multiple uprobes and usdt probes, which is significantly faster and saves extra fds - Implement an fd-based tc BPF attach API (TCX) and BPF link support on top of it - Add SO_REUSEPORT support for TC bpf_sk_assign - Support new instructions from cpu v4 to simplify the generated code and feature completeness, for x86, arm64, riscv64 - Support defragmenting IPv(4|6) packets in BPF - Teach verifier actual bounds of bpf_get_smp_processor_id() and fix perf+libbpf issue related to custom section handling - Introduce bpf map element count and enable it for all program types - Add a BPF hook in sys_socket() to change the protocol ID from IPPROTO_TCP to IPPROTO_MPTCP to cover migration for legacy - Introduce bpf_me_mcache_free_rcu() and fix OOM under stress - Add uprobe support for the bpf_get_func_ip helper - Check skb ownership against full socket - Support for up to 12 arguments in BPF trampoline - Extend link_info for kprobe_multi and perf_event links Netfilter: - Speed-up process exit by aborting ruleset validation if a fatal signal is pending - Allow NLA_POLICY_MASK to be used with BE16/BE32 types Driver API: - Page pool optimizations, to improve data locality and cache usage - Introduce ndo_hwtstamp_get() and ndo_hwtstamp_set() to avoid the need for raw ioctl() handling in drivers - Simplify genetlink dump operations (doit/dumpit) providing them the common information already populated in struct genl_info - Extend and use the yaml devlink specs to [re]generate the split ops - Introduce devlink selective dumps, to allow SF filtering SF based on handle and other attributes - Add yaml netlink spec for netlink-raw families, allow route, link and address related queries via the ynl tool - Remove phylink legacy mode support - Support offload LED blinking to phy - Add devlink port function attributes for IPsec New hardware / drivers: - Ethernet: - Broadcom ASP 2.0 (72165) ethernet controller - MediaTek MT7988 SoC - Texas Instruments AM654 SoC - Texas Instruments IEP driver - Atheros qca8081 phy - Marvell 88Q2110 phy - NXP TJA1120 phy - WiFi: - MediaTek mt7981 support - Can: - Kvaser SmartFusion2 PCI Express devices - Allwinner T113 controllers - Texas Instruments tcan4552/4553 chips - Bluetooth: - Intel Gale Peak - Qualcomm WCN3988 and WCN7850 - NXP AW693 and IW624 - Mediatek MT2925 Drivers: - Ethernet NICs: - nVidia/Mellanox: - mlx5: - support UDP encapsulation in packet offload mode - IPsec packet offload support in eswitch mode - improve aRFS observability by adding new set of counters - extends MACsec offload support to cover RoCE traffic - dynamic completion EQs - mlx4: - convert to use auxiliary bus instead of custom interface logic - Intel - ice: - implement switchdev bridge offload, even for LAG interfaces - implement SRIOV support for LAG interfaces - igc: - add support for multiple in-flight TX timestamps - Broadcom: - bnxt: - use the unified RX page pool buffers for XDP and non-XDP - use the NAPI skb allocation cache - OcteonTX2: - support Round Robin scheduling HTB offload - TC flower offload support for SPI field - Freescale: - add XDP_TX feature support - AMD: - ionic: add support for PCI FLR event - sfc: - basic conntrack offload - introduce eth, ipv4 and ipv6 pedit offloads - ST Microelectronics: - stmmac: maximze PTP timestamping resolution - Virtual NICs: - Microsoft vNIC: - batch ringing RX queue doorbell on receiving packets - add page pool for RX buffers - Virtio vNIC: - add per queue interrupt coalescing support - Google vNIC: - add queue-page-list mode support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add port range matching tc-flower offload - permit enslavement to netdevices with uppers - Ethernet embedded switches: - Marvell (mv88e6xxx): - convert to phylink_pcs - Renesas: - r8A779fx: add speed change support - rzn1: enables vlan support - Ethernet PHYs: - convert mv88e6xxx to phylink_pcs - WiFi: - Qualcomm Wi-Fi 7 (ath12k): - extremely High Throughput (EHT) PHY support - RealTek (rtl8xxxu): - enable AP mode for: RTL8192FU, RTL8710BU (RTL8188GU), RTL8192EU and RTL8723BU - RealTek (rtw89): - Introduce Time Averaged SAR (TAS) support - Connector: - support for event filtering" * tag 'net-next-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1806 commits) net: ethernet: mtk_wed: minor change in wed_{tx,rx}info_show net: ethernet: mtk_wed: add some more info in wed_txinfo_show handler net: stmmac: clarify difference between "interface" and "phy_interface" r8152: add vendor/device ID pair for D-Link DUB-E250 devlink: move devlink_notify_register/unregister() to dev.c devlink: move small_ops definition into netlink.c devlink: move tracepoint definitions into core.c devlink: push linecard related code into separate file devlink: push rate related code into separate file devlink: push trap related code into separate file devlink: use tracepoint_enabled() helper devlink: push region related code into separate file devlink: push param related code into separate file devlink: push resource related code into separate file devlink: push dpipe related code into separate file devlink: move and rename devlink_dpipe_send_and_alloc_skb() helper devlink: push shared buffer related code into separate file devlink: push port related code into separate file devlink: push object register/unregister notifications into separate helpers inet: fix IP_TRANSPARENT error handling ...
2023-08-29Merge tag 'efi-next-for-v6.6' of ↵Linus Torvalds1-8/+2
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi Pull EFI updates from Ard Biesheuvel: "This primarily covers some cleanup work on the EFI runtime wrappers, which are shared between all EFI architectures except Itanium, and which provide some level of isolation to prevent faults occurring in the firmware code (which runs at the same privilege level as the kernel) from bringing down the system. Beyond that, there is a fix that did not make it into v6.5, and some doc fixes and dead code cleanup. - one bugfix for x86 mixed mode that did not make it into v6.5 - first pass of cleanup for the EFI runtime wrappers - some cosmetic touchups" * tag 'efi-next-for-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi: x86/efistub: Fix PCI ROM preservation in mixed mode efi/runtime-wrappers: Clean up white space and add __init annotation acpi/prmt: Use EFI runtime sandbox to invoke PRM handlers efi/runtime-wrappers: Don't duplicate setup/teardown code efi/runtime-wrappers: Remove duplicated macro for service returning void efi/runtime-wrapper: Move workqueue manipulation out of line efi/runtime-wrappers: Use type safe encapsulation of call arguments efi/riscv: Move EFI runtime call setup/teardown helpers out of line efi/arm64: Move EFI runtime call setup/teardown helpers out of line efi/riscv: libstub: Fix comment about absolute relocation efi: memmap: Remove kernel-doc warnings efi: Remove unused extern declaration efi_lookup_mapped_addr()
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-15 08:36:57 +0300