summaryrefslogtreecommitdiff
path: root/arch/powerpc/platforms
AgeCommit message (Collapse)AuthorFilesLines
2018-02-12vfs: do bulk POLL* -> EPOLL* replacementLinus Torvalds4-14/+14
This is the mindless scripted replacement of kernel use of POLL* variables as described by Al, done by this script: for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'` for f in $L; do sed -i "-es/^\([^\"]*\)\(\<POLL$V\>\)/\\1E\\2/" $f; done done with de-mangling cleanups yet to come. NOTE! On almost all architectures, the EPOLL* constants have the same values as the POLL* constants do. But they keyword here is "almost". For various bad reasons they aren't the same, and epoll() doesn't actually work quite correctly in some cases due to this on Sparc et al. The next patch from Al will sort out the final differences, and we should be all done. Scripted-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-02-06Merge tag 'pci-v4.16-changes' of ↵Linus Torvalds2-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: - skip AER driver error recovery callbacks for correctable errors reported via ACPI APEI, as we already do for errors reported via the native path (Tyler Baicar) - fix DPC shared interrupt handling (Alex Williamson) - print full DPC interrupt number (Keith Busch) - enable DPC only if AER is available (Keith Busch) - simplify DPC code (Bjorn Helgaas) - calculate ASPM L1 substate parameter instead of hardcoding it (Bjorn Helgaas) - enable Latency Tolerance Reporting for ASPM L1 substates (Bjorn Helgaas) - move ASPM internal interfaces out of public header (Bjorn Helgaas) - allow hot-removal of VGA devices (Mika Westerberg) - speed up unplug and shutdown by assuming Thunderbolt controllers don't support Command Completed events (Lukas Wunner) - add AtomicOps support for GPU and Infiniband drivers (Felix Kuehling, Jay Cornwall) - expose "ari_enabled" in sysfs to help NIC naming (Stuart Hayes) - clean up PCI DMA interface usage (Christoph Hellwig) - remove PCI pool API (replaced with DMA pool) (Romain Perier) - deprecate pci_get_bus_and_slot(), which assumed PCI domain 0 (Sinan Kaya) - move DT PCI code from drivers/of/ to drivers/pci/ (Rob Herring) - add PCI-specific wrappers for dev_info(), etc (Frederick Lawler) - remove warnings on sysfs mmap failure (Bjorn Helgaas) - quiet ROM validation messages (Alex Deucher) - remove redundant memory alloc failure messages (Markus Elfring) - fill in types for compile-time VGA and other I/O port resources (Bjorn Helgaas) - make "pci=pcie_scan_all" work for Root Ports as well as Downstream Ports to help AmigaOne X1000 (Bjorn Helgaas) - add SPDX tags to all PCI files (Bjorn Helgaas) - quirk Marvell 9128 DMA aliases (Alex Williamson) - quirk broken INTx disable on Ceton InfiniTV4 (Bjorn Helgaas) - fix CONFIG_PCI=n build by adding dummy pci_irqd_intx_xlate() (Niklas Cassel) - use DMA API to get MSI address for DesignWare IP (Niklas Cassel) - fix endpoint-mode DMA mask configuration (Kishon Vijay Abraham I) - fix ARTPEC-6 incorrect IS_ERR() usage (Wei Yongjun) - add support for ARTPEC-7 SoC (Niklas Cassel) - add endpoint-mode support for ARTPEC (Niklas Cassel) - add Cadence PCIe host and endpoint controller driver (Cyrille Pitchen) - handle multiple INTx status bits being set in dra7xx (Vignesh R) - translate dra7xx hwirq range to fix INTD handling (Vignesh R) - remove deprecated Exynos PHY initialization code (Jaehoon Chung) - fix MSI erratum workaround for HiSilicon Hip06/Hip07 (Dongdong Liu) - fix NULL pointer dereference in iProc BCMA driver (Ray Jui) - fix Keystone interrupt-controller-node lookup (Johan Hovold) - constify qcom driver structures (Julia Lawall) - rework Tegra config space mapping to increase space available for endpoints (Vidya Sagar) - simplify Tegra driver by using bus->sysdata (Manikanta Maddireddy) - remove PCI_REASSIGN_ALL_BUS usage on Tegra (Manikanta Maddireddy) - add support for Global Fabric Manager Server (GFMS) event to Microsemi Switchtec switch driver (Logan Gunthorpe) - add IDs for Switchtec PSX 24xG3 and PSX 48xG3 (Kelvin Cao) * tag 'pci-v4.16-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (140 commits) PCI: cadence: Add EndPoint Controller driver for Cadence PCIe controller dt-bindings: PCI: cadence: Add DT bindings for Cadence PCIe endpoint controller PCI: endpoint: Fix EPF device name to support multi-function devices PCI: endpoint: Add the function number as argument to EPC ops PCI: cadence: Add host driver for Cadence PCIe controller dt-bindings: PCI: cadence: Add DT bindings for Cadence PCIe host controller PCI: Add vendor ID for Cadence PCI: Add generic function to probe PCI host controllers PCI: generic: fix missing call of pci_free_resource_list() PCI: OF: Add generic function to parse and allocate PCI resources PCI: Regroup all PCI related entries into drivers/pci/Makefile PCI/DPC: Reformat DPC register definitions PCI/DPC: Add and use DPC Status register field definitions PCI/DPC: Squash dpc_rp_pio_get_info() into dpc_process_rp_pio_error() PCI/DPC: Remove unnecessary RP PIO register structs PCI/DPC: Push dpc->rp_pio_status assignment into dpc_rp_pio_get_info() PCI/DPC: Squash dpc_rp_pio_print_error() into dpc_rp_pio_get_info() PCI/DPC: Make RP PIO log size check more generic PCI/DPC: Rename local "status" to "dpc_status" PCI/DPC: Squash dpc_rp_pio_print_tlp_header() into dpc_rp_pio_print_error() ...
2018-02-02Merge tag 'powerpc-4.16-1' of ↵Linus Torvalds60-617/+2236
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: "Highlights: - Enable support for memory protection keys aka "pkeys" on Power7/8/9 when using the hash table MMU. - Extend our interrupt soft masking to support masking PMU interrupts as well as "normal" interrupts, and then use that to implement local_t for a ~4x speedup vs the current atomics-based implementation. - A new driver "ocxl" for "Open Coherent Accelerator Processor Interface (OpenCAPI)" devices. - Support for new device tree properties on PowerVM to describe hotpluggable memory and devices. - Add support for CLOCK_{REALTIME/MONOTONIC}_COARSE to the 64-bit VDSO. - Freescale updates from Scott: fixes for CPM GPIO and an FSL PCI erratum workaround, plus a minor cleanup patch. As well as quite a lot of other changes all over the place, and small fixes and cleanups as always. Thanks to: Alan Modra, Alastair D'Silva, Alexey Kardashevskiy, Alistair Popple, Andreas Schwab, Andrew Donnellan, Aneesh Kumar K.V, Anju T Sudhakar, Anshuman Khandual, Anton Blanchard, Arnd Bergmann, Balbir Singh, Benjamin Herrenschmidt, Bhaktipriya Shridhar, Bryant G. Ly, Cédric Le Goater, Christophe Leroy, Christophe Lombard, Cyril Bur, David Gibson, Desnes A. Nunes do Rosario, Dmitry Torokhov, Frederic Barrat, Geert Uytterhoeven, Guilherme G. Piccoli, Gustavo A. R. Silva, Gustavo Romero, Ivan Mikhaylov, Joakim Tjernlund, Joe Perches, Josh Poimboeuf, Juan J. Alvarez, Julia Cartwright, Kamalesh Babulal, Madhavan Srinivasan, Mahesh Salgaonkar, Mathieu Malaterre, Michael Bringmann, Michael Hanselmann, Michael Neuling, Nathan Fontenot, Naveen N. Rao, Nicholas Piggin, Paul Mackerras, Philippe Bergheaud, Ram Pai, Russell Currey, Santosh Sivaraj, Scott Wood, Seth Forshee, Simon Guo, Stewart Smith, Sukadev Bhattiprolu, Thiago Jung Bauermann, Vaibhav Jain, Vasyl Gomonovych" * tag 'powerpc-4.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (199 commits) powerpc/mm/radix: Fix build error when RADIX_MMU=n macintosh/ams-input: Use true and false for boolean values macintosh: change some data types from int to bool powerpc/watchdog: Print the NIP in soft_nmi_interrupt() powerpc/watchdog: regs can't be null in soft_nmi_interrupt() powerpc/watchdog: Tweak watchdog printks powerpc/cell: Remove axonram driver rtc-opal: Fix handling of firmware error codes, prevent busy loops powerpc/mpc52xx_gpt: make use of raw_spinlock variants macintosh/adb: Properly mark continued kernel messages powerpc/pseries: Fix cpu hotplug crash with memoryless nodes powerpc/numa: Ensure nodes initialized for hotplug powerpc/numa: Use ibm,max-associativity-domains to discover possible nodes powerpc/kernel: Block interrupts when updating TIDR powerpc/powernv/idoa: Remove unnecessary pcidev from pci_dn powerpc/mm/nohash: do not flush the entire mm when range is a single page powerpc/pseries: Add Initialization of VF Bars powerpc/pseries/pci: Associate PEs to VFs in configure SR-IOV powerpc/eeh: Add EEH notify resume sysfs powerpc/eeh: Add EEH operations to notify resume ...
2018-01-31Merge tag 'dma-mapping-4.16' of git://git.infradead.org/users/hch/dma-mappingLinus Torvalds6-20/+20
Pull dma mapping updates from Christoph Hellwig: "Except for a runtime warning fix from Christian this is all about consolidation of the generic no-IOMMU code, a well as the glue code for swiotlb. All the code is based on the x86 implementation with hooks to allow all architectures that aren't cache coherent to use it. The x86 conversion itself has been deferred because the x86 maintainers were a little busy in the last months" * tag 'dma-mapping-4.16' of git://git.infradead.org/users/hch/dma-mapping: (57 commits) MAINTAINERS: add the iommu list for swiotlb and xen-swiotlb arm64: use swiotlb_alloc and swiotlb_free arm64: replace ZONE_DMA with ZONE_DMA32 mips: use swiotlb_{alloc,free} mips/netlogic: remove swiotlb support tile: use generic swiotlb_ops tile: replace ZONE_DMA with ZONE_DMA32 unicore32: use generic swiotlb_ops ia64: remove an ifdef around the content of pci-dma.c ia64: clean up swiotlb support ia64: use generic swiotlb_ops ia64: replace ZONE_DMA with ZONE_DMA32 swiotlb: remove various exports swiotlb: refactor coherent buffer allocation swiotlb: refactor coherent buffer freeing swiotlb: wire up ->dma_supported in swiotlb_dma_ops swiotlb: add common swiotlb_map_ops swiotlb: rename swiotlb_free to swiotlb_exit x86: rename swiotlb_dma_ops powerpc: rename swiotlb_dma_ops ...
2018-01-31Merge branch 'pci/resource' into nextBjorn Helgaas1-1/+1
* pci/resource: PCI: tegra: Remove PCI_REASSIGN_ALL_BUS use on Tegra resource: Set type when reserving new regions resource: Set type of "reserve=" user-specified resources irqchip/i8259: Set I/O port resource types correctly powerpc: Set I/O port resource types correctly MIPS: Set I/O port resource types correctly vgacon: Set VGA struct resource types PCI: Use dev_info() rather than dev_err() for ROM validation PCI: Remove PCI_REASSIGN_ALL_RSRC use on arm and arm64 PCI: Remove sysfs resource mmap warning Conflicts: drivers/pci/rom.c
2018-01-31Merge branch 'pci/misc' into nextBjorn Helgaas1-3/+3
* pci/misc: PCI: Add dummy pci_irqd_intx_xlate() for CONFIG_PCI=n build PCI: Add wrappers for dev_printk() PCI: Remove unnecessary messages for memory allocation failures PCI: Add #defines for Completion Timeout Disable feature hinic: Replace PCI pool old API net: e100: Replace PCI pool old API block: DAC960: Replace PCI pool old API MAINTAINERS: Include more PCI files PCI: Remove unneeded kallsyms include powerpc/pci: Unroll two pass loop when scanning bridges powerpc/pci: Use for_each_pci_bridge() helper
2018-01-31Merge branch 'misc.poll' of ↵Linus Torvalds5-17/+15
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull poll annotations from Al Viro: "This introduces a __bitwise type for POLL### bitmap, and propagates the annotations through the tree. Most of that stuff is as simple as 'make ->poll() instances return __poll_t and do the same to local variables used to hold the future return value'. Some of the obvious brainos found in process are fixed (e.g. POLLIN misspelled as POLL_IN). At that point the amount of sparse warnings is low and most of them are for genuine bugs - e.g. ->poll() instance deciding to return -EINVAL instead of a bitmap. I hadn't touched those in this series - it's large enough as it is. Another problem it has caught was eventpoll() ABI mess; select.c and eventpoll.c assumed that corresponding POLL### and EPOLL### were equal. That's true for some, but not all of them - EPOLL### are arch-independent, but POLL### are not. The last commit in this series separates userland POLL### values from the (now arch-independent) kernel-side ones, converting between them in the few places where they are copied to/from userland. AFAICS, this is the least disruptive fix preserving poll(2) ABI and making epoll() work on all architectures. As it is, it's simply broken on sparc - try to give it EPOLLWRNORM and it will trigger only on what would've triggered EPOLLWRBAND on other architectures. EPOLLWRBAND and EPOLLRDHUP, OTOH, are never triggered at all on sparc. With this patch they should work consistently on all architectures" * 'misc.poll' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (37 commits) make kernel-side POLL... arch-independent eventpoll: no need to mask the result of epi_item_poll() again eventpoll: constify struct epoll_event pointers debugging printk in sg_poll() uses %x to print POLL... bitmap annotate poll(2) guts 9p: untangle ->poll() mess ->si_band gets POLL... bitmap stored into a user-visible long field ring_buffer_poll_wait() return value used as return value of ->poll() the rest of drivers/*: annotate ->poll() instances media: annotate ->poll() instances fs: annotate ->poll() instances ipc, kernel, mm: annotate ->poll() instances net: annotate ->poll() instances apparmor: annotate ->poll() instances tomoyo: annotate ->poll() instances sound: annotate ->poll() instances acpi: annotate ->poll() instances crypto: annotate ->poll() instances block: annotate ->poll() instances x86: annotate ->poll() instances ...
2018-01-31Merge branch 'siginfo-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace Pull siginfo cleanups from Eric Biederman: "Long ago when 2.4 was just a testing release copy_siginfo_to_user was made to copy individual fields to userspace, possibly for efficiency and to ensure initialized values were not copied to userspace. Unfortunately the design was complex, it's assumptions unstated, and humans are fallible and so while it worked much of the time that design failed to ensure unitialized memory is not copied to userspace. This set of changes is part of a new design to clean up siginfo and simplify things, and hopefully make the siginfo handling robust enough that a simple inspection of the code can be made to ensure we don't copy any unitializied fields to userspace. The design is to unify struct siginfo and struct compat_siginfo into a single definition that is shared between all architectures so that anyone adding to the set of information shared with struct siginfo can see the whole picture. Hopefully ensuring all future si_code assignments are arch independent. The design is to unify copy_siginfo_to_user32 and copy_siginfo_from_user32 so that those function are complete and cope with all of the different cases documented in signinfo_layout. I don't think there was a single implementation of either of those functions that was complete and correct before my changes unified them. The design is to introduce a series of helpers including force_siginfo_fault that take the values that are needed in struct siginfo and build the siginfo structure for their callers. Ensuring struct siginfo is built correctly. The remaining work for 4.17 (unless someone thinks it is post -rc1 material) is to push usage of those helpers down into the architectures so that architecture specific code will not need to deal with the fiddly work of intializing struct siginfo, and then when struct siginfo is guaranteed to be fully initialized change copy siginfo_to_user into a simple wrapper around copy_to_user. Further there is work in progress on the issues that have been documented requires arch specific knowledge to sort out. The changes below fix or at least document all of the issues that have been found with siginfo generation. Then proceed to unify struct siginfo the 32 bit helpers that copy siginfo to and from userspace, and generally clean up anything that is not arch specific with regards to siginfo generation. It is a lot but with the unification you can of siginfo you can already see the code reduction in the kernel" * 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (45 commits) signal/memory-failure: Use force_sig_mceerr and send_sig_mceerr mm/memory_failure: Remove unused trapno from memory_failure signal/ptrace: Add force_sig_ptrace_errno_trap and use it where needed signal/powerpc: Remove unnecessary signal_code parameter of do_send_trap signal: Helpers for faults with specialized siginfo layouts signal: Add send_sig_fault and force_sig_fault signal: Replace memset(info,...) with clear_siginfo for clarity signal: Don't use structure initializers for struct siginfo signal/arm64: Better isolate the COMPAT_TASK portion of ptrace_hbptriggered ptrace: Use copy_siginfo in setsiginfo and getsiginfo signal: Unify and correct copy_siginfo_to_user32 signal: Remove the code to clear siginfo before calling copy_siginfo_from_user32 signal: Unify and correct copy_siginfo_from_user32 signal/blackfin: Remove pointless UID16_SIGINFO_COMPAT_NEEDED signal/blackfin: Move the blackfin specific si_codes to asm-generic/siginfo.h signal/tile: Move the tile specific si_codes to asm-generic/siginfo.h signal/frv: Move the frv specific si_codes to asm-generic/siginfo.h signal/ia64: Move the ia64 specific si_codes to asm-generic/siginfo.h signal/powerpc: Remove redefinition of NSIGTRAP on powerpc signal: Move addr_lsb into the _sigfault union for clarity ...
2018-01-28powerpc/cell: Remove axonram driverMichael Ellerman1-11/+0
The QS21/22 IBM Cell blades had a southbridge chip called Axon. This could have DDR DIMMs attached to it, though they were not directly usable as RAM, instead they could be used as some sort of buffer, if applications were written specifically to use the block device provided by the driver. Although the driver supposedly had direct access support, it was apparently never tested (see commit 91117a20245b ("axonram: Fix bug in direct_access")). These machines have not been available for over 5 years, and were never widely in use. It seems highly unlikely anyone is using this driver. In general we're happy to leave old drivers in the tree, but because DAX is involved this driver is caught up in the ongoing work in that area, but none of the DAX folks are able to test it. So remove the driver, if any one *is* using it, we'll be happy to put it back. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-01-27powerpc/mpc52xx_gpt: make use of raw_spinlock variantsJulia Cartwright1-26/+26
The mpc52xx_gpt code currently implements an irq_chip for handling interrupts; due to how irq_chip handling is done, it's necessary for the irq_chip methods to be invoked from hardirq context, even on a a real-time kernel. Because the spinlock_t type becomes a "sleeping" spinlock w/ RT kernels, it is not suitable to be used with irq_chips. A quick audit of the operations under the lock reveal that they do only minimal, bounded work, and are therefore safe to do under a raw spinlock. Signed-off-by: Julia Cartwright <julia@ni.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-01-27powerpc/pseries: Fix cpu hotplug crash with memoryless nodesMichael Bringmann1-0/+3
On powerpc systems with shared configurations of CPUs and memory and memoryless nodes at boot, an event ordering problem was observed on a SLES12 build platforms with the hot-add of CPUs to the memoryless nodes. * The most common error occurred when the memory SLAB driver attempted to reference the memoryless node to which a CPU was being added before the kernel had finished initializing all of the data structures for the CPU and exited 'device_online' under DLPAR/hot-add. Normally the memoryless node would be initialized through the call path device_online ... arch_update_cpu_topology ... find_cpu_nid ... try_online_node. This patch ensures that the powerpc node will be initialized as early as possible, even if it was memoryless and CPU-less at the point when we are trying to hot-add a new CPU to it. Signed-off-by: Michael Bringmann <mwb@linux.vnet.ibm.com> Reviewed-by: Nathan Fontenot <nfont@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-01-27powerpc/powernv/idoa: Remove unnecessary pcidev from pci_dnAlexey Kardashevskiy2-4/+4
The pcidev value stored in pci_dn is only used for NPU/NPU2 initialization. We can easily drop the cached pointer and use an ancient helper - pci_get_domain_bus_and_slot() instead in order to reduce complexity. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Acked-by: Russell Currey <ruscur@russell.cc> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-01-27powerpc/pseries: Add Initialization of VF BarsBryant G. Ly1-0/+164
When enabling SR-IOV in pseries platform, the VF bar properties for a PF are reported on the device node in the device tree. This patch adds the IOV Bar resources to Linux structures from the device tree for later use when configuring SR-IOV by PF driver. Signed-off-by: Bryant G. Ly <bryantly@linux.vnet.ibm.com> Signed-off-by: Juan J. Alvarez <jjalvare@linux.vnet.ibm.com> Acked-by: Russell Currey <ruscur@russell.cc> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-01-27powerpc/pseries/pci: Associate PEs to VFs in configure SR-IOVBryant G. Ly1-2/+148
After initial validation of SR-IOV resources, firmware will associate PEs to the dynamic VFs created within this call. This patch adds the association of PEs to the PF array of PE numbers indexed by VF. Signed-off-by: Bryant G. Ly <bryantly@linux.vnet.ibm.com> Signed-off-by: Juan J. Alvarez <jjalvare@linux.vnet.ibm.com> Acked-by: Russell Currey <ruscur@russell.cc> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-01-27powerpc/eeh: Add EEH operations to notify resumeBryant G. Ly2-2/+97
When pseries SR-IOV is enabled and after a PF driver has resumed from EEH, platform has to be notified of the event so the child VFs can be allowed to resume their normal recovery path. This patch makes the EEH operation allow unfreeze platform dependent code and adds the call to pseries EEH code. Signed-off-by: Bryant G. Ly <bryantly@linux.vnet.ibm.com> Signed-off-by: Juan J. Alvarez <jjalvare@linux.vnet.ibm.com> Acked-by: Russell Currey <ruscur@russell.cc> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-01-27powerpc/pseries: Set eeh_pe of EEH_PE_VF typeBryant G. Ly1-0/+18
To correctly use EEH code one has to make sure that the EEH_PE_VF is set for dynamic created VFs. Therefore this patch allocates an eeh_pe of eeh type EEH_PE_VF and associates PE with parent. Signed-off-by: Bryant G. Ly <bryantly@linux.vnet.ibm.com> Signed-off-by: Juan J. Alvarez <jjalvare@linux.vnet.ibm.com> Acked-by: Russell Currey <ruscur@russell.cc> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-01-27powerpc/eeh: Update VF config space after EEHBryant G. Ly2-63/+28
Add EEH platform operations for pseries to update VF config space. With this change after EEH, the VF will have updated config space for pseries platform. Signed-off-by: Bryant G. Ly <bryantly@linux.vnet.ibm.com> Signed-off-by: Juan J. Alvarez <jjalvare@linux.vnet.ibm.com> Acked-by: Russell Currey <ruscur@russell.cc> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-01-24ocxl: Add AFU interrupt supportFrederic Barrat1-0/+30
Add user APIs through ioctl to allocate, free, and be notified of an AFU interrupt. For opencapi, an AFU can trigger an interrupt on the host by sending a specific command targeting a 64-bit object handle. On POWER9, this is implemented by mapping a special page in the address space of a process and a write to that page will trigger an interrupt. Signed-off-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-01-24powerpc/powernv: Capture actag information for the deviceFrederic Barrat1-0/+305
In the opencapi protocol, host memory contexts are referenced by a 'actag'. During setup, a driver must tell the device how many actags it can used, and what values are acceptable. On POWER9, the NPU can handle 64 actags per link, so they must be shared between all the PCI functions of the link. To get a global picture of how many actags are used by each AFU of every function, we capture some data at the end of PCI enumeration, so that actags can be shared fairly if needed. This is not powernv specific per say, but rather a consequence of the opencapi configuration specification being quite general. The number of available actags on POWER9 makes it more likely to be hit. This is somewhat mitigated by the fact that existing AFUs are coded by requesting a reasonable count of actags and existing devices carry only one AFU. Signed-off-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-01-24powerpc/powernv: Add platform-specific services for opencapiFrederic Barrat2-0/+181
Implement a few platform-specific calls which can be used by drivers: - provide the Transaction Layer capabilities of the host, so that the driver can find some common ground and configure the device and host appropriately. - provide the hw interrupt to be used for translation faults raised by the NPU - map/unmap some NPU mmio registers to get the fault context when the NPU raises an address translation fault The rest are wrappers around the previously-introduced opal calls. Signed-off-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-01-24powerpc/powernv: Add opal calls for opencapiFrederic Barrat1-0/+3
Add opal calls to interact with the NPU: OPAL_NPU_SPA_SETUP: set the Shared Process Area (SPA) The SPA is a table containing one entry (Process Element) per memory context which can be accessed by the opencapi device. OPAL_NPU_SPA_CLEAR_CACHE: clear the context cache The NPU keeps a cache of recently accessed memory contexts. When a Process Element is removed from the SPA, the cache for the link must be cleared. OPAL_NPU_TL_SET: configure the Transaction Layer The Transaction Layer specification defines several templates for messages to be exchanged on the link. During link setup, the host and device must negotiate what templates are supported on both sides and at what rates those messages can be sent. Signed-off-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com> Acked-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-01-24powerpc/powernv: Set correct configuration space size for opencapi devicesAndrew Donnellan1-0/+13
The configuration space for opencapi devices doesn't have a PCI Express capability, therefore confusing linux in thinking it's of an old PCI type with a 256-byte configuration space size, instead of the desired 4k. So add a PCI fixup to declare the correct size. Signed-off-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com> Signed-off-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-01-24powerpc/powernv: Introduce new PHB type for opencapi linksFrederic Barrat4-12/+43
The NPU was already abstracted by opal as a virtual PHB for nvlink, but it helps to be able to differentiate between a nvlink or opencapi PHB, as it's not completely transparent to linux. In particular, PE assignment differs and we'll also need the information in later patches. So rename existing PNV_PHB_NPU type to PNV_PHB_NPU_NVLINK and add a new type PNV_PHB_NPU_OCAPI. Signed-off-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com> Signed-off-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-01-23mm/memory_failure: Remove unused trapno from memory_failureEric W. Biederman1-1/+1
Today 4 architectures set ARCH_SUPPORTS_MEMORY_FAILURE (arm64, parisc, powerpc, and x86), while 4 other architectures set __ARCH_SI_TRAPNO (alpha, metag, sparc, and tile). These two sets of architectures do not interesect so remove the trapno paramater to remove confusion. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-01-22powerpc/pseries, ps3: panic flush kernel messages before halting systemNicholas Piggin3-15/+12
Platforms with a panic handler that halts the system can have problems getting kernel messages out, because the panic notifiers are called before kernel/panic.c does its flushing of printk buffers an console etc. This was attempted to be solved with commit a3b2cb30f252 ("powerpc: Do not call ppc_md.panic in fadump panic notifier"), but that wasn't the right approach and caused other problems, and was reverted by commit ab9dbf771ff9. Instead, the powernv shutdown paths have already had a similar problem, fixed by taking the message flushing sequence from kernel/panic.c. That's a little bit ugly, but while we have the code duplicated, it will work for this case as well. So have ppc panic handlers do the same flushing before they terminate. Without this patch, a qemu pseries_le_defconfig guest stops silently when issued the nmi command when xmon is off and no crash dumpers enabled. Afterwards, an oops is printed by each CPU as expected. Fixes: ab9dbf771ff9 ("Revert "powerpc: Do not call ppc_md.panic in fadump panic notifier"") Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-01-21powerpc/powernv: Add ppc_pci_reset_phbs parameter to issue a PHB resetGuilherme G. Piccoli1-2/+12
During a kdump kernel boot in PowerPC, we request a reset of the PHBs to the FW. It makes sense, since if we are booting a kdump kernel it means we had some trouble before and we cannot rely in the adapters' health; they could be in a bad state, hence the reset is needed. But this reset is useful not only in kdump - there are situations, specially when debugging drivers, that we could break an adapter in a way it requires such reset. One can tell to just go ahead and reboot the machine, but happens that many times doing kexec is much faster, and so preferable than a full power cycle. This patch adds the ppc_pci_reset_phbs parameter to perform such reset. Signed-off-by: Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-01-21powerpc: Use octal numbers for file permissionsRussell Currey13-28/+27
Symbolic macros are unintuitive and hard to read, whereas octal constants are much easier to interpret. Replace macros for the basic permission flags (user/group/other read/write/execute) with numeric constants instead, across the whole powerpc tree. Introducing a significant number of changes across the tree for no runtime benefit isn't exactly desirable, but so long as these macros are still used in the tree people will keep sending patches that add them. Not only are they hard to parse at a glance, there are multiple ways of coming to the same value (as you can see with 0444 and 0644 in this patch) which hurts readability. Signed-off-by: Russell Currey <ruscur@russell.cc> Reviewed-by: Cyril Bur <cyrilbur@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-01-21powerpc: Fix old-style function definitionMathieu Malaterre1-3/+3
Fix warnings such as: arch/powerpc/platforms/powermac/backlight.c: In function ‘pmac_backlight_get_legacy_brightness’: arch/powerpc/platforms/powermac/backlight.c:189:5: error: old-style function definition [-Werror=old-style-definition] int pmac_backlight_get_legacy_brightness() ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Signed-off-by: Mathieu Malaterre <malat@debian.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-01-21Merge branch 'fixes' into nextMichael Ellerman6-4/+122
Merge our fixes branch from the 4.15 cycle. Unusually the fixes branch saw some significant features merged, notably the RFI flush patches, so we want the code in next to be tested against that, to avoid any surprises when the two are merged. There's also some other work on the panic handling that was reverted in fixes and we now want to do properly in next, which would conflict. And we also fix a few other minor merge conflicts.
2018-01-21pseries/drc-info: Search DRC properties for CPU indexesMichael Bringmann2-28/+158
pseries/drc-info: Provide parallel routines to convert between drc_index and CPU numbers at runtime, using the older device-tree properties ("ibm,drc-indexes", "ibm,drc-names", "ibm,drc-types" and "ibm,drc-power-domains"), or the new property "ibm,drc-info". Signed-off-by: Michael Bringmann <mwb@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-01-21powerpc/firmware: Add definitions for new drc-info firmware featureMichael Bringmann1-0/+1
Firmware Features: Define new bit flag representing the presence of new device tree property "ibm,drc-info". The flag is used to tell the front end processor whether the Linux kernel supports the new property, and by the front end processor to tell the Linux kernel that the new property is present in the device tree. Signed-off-by: Michael Bringmann <mwb@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-01-21powerpc/spufs: use timespec64 for timestampsArnd Bergmann2-4/+4
The switch log prints the tv_sec portion of timespec as a 32-bit number, while overflows in 2106. It also uses the timespec type, which is safe on 64-bit architectures, but deprecated because it causes overflows in 2038 elsewhere. This changes it to timespec64 and printing a 64-bit number for consistency. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Jeremy Kerr <jk@ozlabs.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-01-20powerpc/powernv/ioda: Finish removing explicit max window size checkAlexey Kardashevskiy1-1/+0
9003a2498 removed checn from the DMA window pages allocator, however the VFIO driver tests limits before doing so by calling the get_table_size hook which was left behind; this fixes it. Fixes: 9003a2498 "powerpc/powernv/ioda: Remove explicit max window size check" Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-01-19powerpc/powernv: Add debugfs interface for imc-mode and imc-commandAnju T Sudhakar1-0/+77
In memory Collection (IMC) counter pmu driver controls the ucode's execution state. At the system boot, IMC perf driver pause the ucode. Ucode state is changed to "running" only when any of the nest units are monitored or profiled using perf tool. Nest units support only limited set of hardware counters and ucode is always programmed in the "production mode" ("accumulation") mode. This mode is configured to provide key performance metric data for most of the nest units. But ucode also supports other modes which would be used for "debug" to drill down specific nest units. That is, ucode when switched to "powerbus" debug mode (for example), will dynamically reconfigure the nest counters to target only "powerbus" related events in the hardware counters. This allows the IMC nest unit to focus on powerbus related transactions in the system in more detail. At this point, production mode events may or may not be counted. IMC nest counters has both in-band (ucode access) and out of band access to it. Since not all nest counter configurations are supported by ucode, out of band tools are used to characterize other nest counter configurations. Patch provides an interface via "debugfs" to enable the switching of ucode modes in the system. To switch ucode mode, one has to first pause the microcode (imc_cmd), and then write the target mode value to the "imc_mode" file. Proposed Approach: In the proposed approach, the function (export_imc_mode_and_cmd) which creates the debugfs interface for imc mode and command is implemented in opal-imc.c. Thus we can use imc_get_mem_addr() to get the homer base address for each chip. The interface to expose imc mode and command is required only if we have nest pmu units registered. Employing the existing data structures to track whether we have any nest units registered will require to extend data from perf side to opal-imc.c. Instead an integer is introduced to hold that information by counting successful nest unit registration. Debugfs interface is removed based on the integer count. Example for the interface: $ ls /sys/kernel/debug/imc imc_cmd_0 imc_cmd_8 imc_mode_0 imc_mode_8 Signed-off-by: Anju T Sudhakar <anju@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-01-16powerpc/8xx: Only perform perf counting when perf is in use.Christophe Leroy1-7/+0
In TLB miss handlers, updating the perf counter is only useful when performing a perf analysis. As it has a noticeable overhead, let's only do it when needed. In order to do so, the exit of the miss handlers will be patched when starting/stopping 'perf': the first register restore instruction of each exit point will be replaced by a jump to the counting code. Once this is done, CONFIG_PPC_8xx_PERF_EVENT becomes useless as this feature doesn't add any overhead. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-01-16powerpc/8xx: Remove CPU6 ERRATA WorkaroundChristophe Leroy1-12/+0
CPU6 ERRATA affects only MPC860 revisions prior to C.0. Manufacturing of those revisiosn was stopped in 1999-2000. Therefore, it has been almost 20 years since this ERRATA has been fixed in the silicon. This patch removes the workaround for that ERRATA. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-01-16powerpc/8xx: do not select CONFIG_PPC_LIB_RHEAPChristophe Leroy1-1/+0
Since commit 0e6e01ff694ee ("CPM/QE: use genalloc to manage CPM/QE muram"), rheap is not used anymore. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-01-16powernv/kdump: Fix cases where the kdump kernel can get HMI'sBalbir Singh1-0/+28
Certain HMI's such as malfunction error propagate through all threads/core on the system. If a thread was offline prior to us crashing the system and jumping to the kdump kernel, bad things happen when it wakes up due to an HMI in the kdump kernel. There are several possible ways to solve this problem 1. Put the offline cores in a state such that they are not woken up for machine check and HMI errors. This does not work, since we might need to wake up offline threads to handle TB errors 2. Ignore HMI errors, setup HMEER to mask HMI errors, but this still leads the window open for any MCEs and masking them for the duration of the dump might be a concern 3. Wake up offline CPUs, as in send them to crash_ipi_callback (not wake them up as in mark them online as seen by the hotplug). kexec does a wake_online_cpus() call, this patch does something similar, but instead sends an IPI and forces them to crash_ipi_callback() This patch takes approach #3. Care is taken to enable this only for powenv platforms via crash_wake_offline (a global value set at setup time). The crash code sends out IPI's to all CPU's which then move to crash_ipi_callback and kexec_smp_wait(). Signed-off-by: Balbir Singh <bsingharora@gmail.com> Reviewed-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-01-16powerpc: make use of for_each_node_by_type() instead of open-coding itDmitry Torokhov4-9/+10
Instead of manually coding the loop with of_find_node_by_type(), let's switch to the standard macro for iterating over nodes with given type. Also fixed a couple of refcount leaks in the aforementioned loops. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-01-16powerpc/pseries: Enable support of ibm,dynamic-memory-v2Nathan Fontenot1-0/+1
Add required bits to the architecture vector to enable support of the ibm,dynamic-memory-v2 device tree property. Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-01-16powerpc: Move of_drconf_cell struct to asm/drmem.hNathan Fontenot1-3/+3
Now that the powerpc code parses dynamic reconfiguration memory LMB information from the LMB array and not the device tree directly we can move the of_drconf_cell struct to drmem.h where it fits better. In addition, the struct is renamed to of_drconf_cell_v1 in anticipation of upcoming support for version 2 of the dynamic reconfiguration property and the members are typed as __be* values to reflect how they exist in the device tree. Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-01-16powerpc/pseries: Update memory hotplug code to use drmem LMB arrayNathan Fontenot1-318/+198
Update the pseries memory hotplug code to use the newly added dynamic reconfiguration LMB array. Doing this is required for the upcoming support of version 2 of the dynamic reconfiguration device tree property. In addition, making this change cleans up the code that parses the LMB information as we no longer need to worry about device tree format. This allows us to discard one of the first steps on memory hotplug where we make a working copy of the device tree property and convert the entire property to cpu format. Instead we just use the LMB array directly while holding the memory hotplug lock. This patch also moves the updating of the device tree property to powerpc/mm/drmem.c. This allows to the hotplug code to work without needing to know the device tree format and provides a single routine for updating the device tree property. This new routine will handle determination of the proper device tree format and generate a properly formatted device tree property. Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-01-12powerpc/PCI: Deprecate pci_get_bus_and_slot()Sinan Kaya1-1/+1
pci_get_bus_and_slot() is restrictive such that it assumes domain=0 as where a PCI device is present. This restricts the device drivers to be reused for other domain numbers. Getting ready to remove pci_get_bus_and_slot() function in favor of pci_get_domain_bus_and_slot(). Use pci_get_domain_bus_and_slot() with a domain number of 0 as the code is not ready to consume multiple domains and existing code used domain number 0. Signed-off-by: Sinan Kaya <okaya@codeaurora.org> Signed-off-by: Bjorn Helgaas <helgaas@kernel.org> Acked-by: Michael Ellerman <mpe@ellerman.id.au>
2018-01-11PCI: Add #defines for Completion Timeout Disable featureBjorn Helgaas1-3/+3
Add #defines for the Completion Timeout Disable feature and use them. No functional change intended. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Michael Ellerman <mpe@ellerman.id.au>
2018-01-10powerpc: rename dma_direct_ to dma_nommu_Christoph Hellwig6-20/+20
We want to use the dma_direct_ namespace for a generic implementation, so rename powerpc to the second best choice: dma_nommu_. Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-01-10powerpc/powernv: Check device-tree for RFI flush settingsOliver O'Halloran1-0/+49
New device-tree properties are available which tell the hypervisor settings related to the RFI flush. Use them to determine the appropriate flush instruction to use, and whether the flush is required. Signed-off-by: Oliver O'Halloran <oohall@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-01-10powerpc/pseries: Query hypervisor for RFI flush settingsMichael Neuling1-0/+35
A new hypervisor call is available which tells the guest settings related to the RFI flush. Use it to query the appropriate flush instruction(s), and whether the flush is required. Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-01-08powerpc/pseries: Make RAS IRQ explicitly dependent on DLPAR WQMichael Ellerman3-4/+22
The hotplug code uses its own workqueue to handle IRQ requests (pseries_hp_wq), however that workqueue is initialized after init_ras_IRQ(). That can lead to a kernel panic if any hotplug interrupts fire after init_ras_IRQ() but before pseries_hp_wq is initialised. eg: UDP-Lite hash table entries: 2048 (order: 0, 65536 bytes) NET: Registered protocol family 1 Unpacking initramfs... (qemu) object_add memory-backend-ram,id=mem1,size=10G (qemu) device_add pc-dimm,id=dimm1,memdev=mem1 Unable to handle kernel paging request for data at address 0xf94d03007c421378 Faulting instruction address: 0xc00000000012d744 Oops: Kernel access of bad area, sig: 11 [#1] LE SMP NR_CPUS=2048 NUMA pSeries Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.15.0-rc2-ziviani+ #26 task: (ptrval) task.stack: (ptrval) NIP: c00000000012d744 LR: c00000000012d744 CTR: 0000000000000000 REGS: (ptrval) TRAP: 0380 Not tainted (4.15.0-rc2-ziviani+) MSR: 8000000000009033 <SF,EE,ME,IR,DR,RI,LE> CR: 28088042 XER: 20040000 CFAR: c00000000012d3c4 SOFTE: 0 ... NIP [c00000000012d744] __queue_work+0xd4/0x5c0 LR [c00000000012d744] __queue_work+0xd4/0x5c0 Call Trace: [c0000000fffefb90] [c00000000012d744] __queue_work+0xd4/0x5c0 (unreliable) [c0000000fffefc70] [c00000000012dce4] queue_work_on+0xb4/0xf0 This commit makes the RAS IRQ registration explicitly dependent on the creation of the pseries_hp_wq. Reported-by: Min Deng <mdeng@redhat.com> Reported-by: Daniel Henrique Barboza <danielhb@linux.vnet.ibm.com> Tested-by: Jose Ricardo Ziviani <joserz@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
2017-12-19powerpc: Set I/O port resource types correctlyBjorn Helgaas1-1/+1
Set I/O port resource structs to have IORESOURCE_IO in their type field. Previously we marked these as merely IORESOURCE_BUSY without indicating the type. Setting the type doesn't fix any functional problem but makes %pR on the resource work better. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-12-11PCI/IOV: Add pci_vf_drivers_autoprobe() interfaceBryant G. Ly1-0/+2
Add a pci_vf_drivers_autoprobe() interface. Setting autoprobe to false on the PF prevents drivers from binding to VFs when they are enabled. Signed-off-by: Bryant G. Ly <bryantly@linux.vnet.ibm.com> Signed-off-by: Juan J. Alvarez <jjalvare@linux.vnet.ibm.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Russell Currey <ruscur@russell.cc> Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
generated by cgit v1.2.3 (git 2.39.0) at 2025-01-30 09:20:24 +0300