summaryrefslogtreecommitdiff
path: root/arch/powerpc/platforms/iseries
AgeCommit message (Collapse)AuthorFilesLines
2006-04-29[PATCH] powerpc: add all the iSeries virtual devices to the device treeStephen Rothwell2-2/+88
We do this by putting them in the flattened device tree at setup time. This required the flattened device tree blob to be made bigger. Currenly we don't do anything with these. Also make a function static. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-04-22[PATCH] powerpc: Remove stale iseries globalOlof Johansson2-13/+1
Not even the iSeries maintainer seems to have access to this legendary piranha simulator. It adds a bit of ugliness in the common time init code, and if it's no longer used we might as well be done with it and remove the bloat. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-04-22[PATCH] powerpc: Don't print chosen idle loop at every bootOlof Johansson1-2/+2
No need to write out what idle loop is used on every boot. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-04-22[PATCH] powerpc: remove io_page_maskAnton Blanchard1-3/+0
Cleanup patch which removes the io_page_mask. It fixes the reset on some e1000 devices which is needed for clean kexec reboots. The legacy devices which broke with this patch (parallel port and PC speaker) have now been fixed in Linus' tree. Signed-off-by: Anton Blanchard <anton@samba.org> Acked-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-04-04powerpc: iSeries has only 256 IRQsStephen Rothwell1-0/+7
The iSeries Hypervisor only allows us to specify IRQ numbers up to 255 (it has a u8 field to pass it in). This patch allows platforms to specify a maximum to the virtual IRQ numbers we will use and has iSeries set that to 255. If not set, the maximum is NR_IRQS - 1 (as before). Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2006-03-28[PATCH] powerpc: Kill _machine and hard-coded platform numbersBenjamin Herrenschmidt1-4/+5
This removes statically assigned platform numbers and reworks the powerpc platform probe code to use a better mechanism. With this, board support files can simply declare a new machine type with a macro, and implement a probe() function that uses the flattened device-tree to detect if they apply for a given machine. We now have a machine_is() macro that replaces the comparisons of _machine with the various PLATFORM_* constants. This commit also changes various drivers to use the new macro instead of looking at _machine. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-03-28[PATCH] powerpc: Rename and export ppc64_firmware_featuresMichael Ellerman1-2/+2
We need to export ppc64_firmware_features for modules. Before we do that I think we should probably rename it to powerpc_firmware_features. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-03-22[PATCH] powerpc: iseries: Add bootargs to /chosenMichael Ellerman1-0/+1
Add the command line args to the device tree as /chosen/bootargs. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-03-22[PATCH] powerpc: iseries: Add /system-id, /model and /compatibleMichael Ellerman1-0/+20
Add /system-id, /model and /compatible to the iSeries device tree. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-03-22[PATCH] powerpc: iseries: Make more stuff static in platforms/iseries/mf.cMichael Ellerman1-39/+39
Make mf_get_rtc(), mf_get_boot_rtc() and mf_set_rtc() static, cause they can be. We need to move mf_set_rtc() to avoid a forward declaration. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-03-22[PATCH] powerpc: iseries: Remove pointless iSeries_(restart|power_off|halt)Michael Ellerman2-28/+4
These routines just call through to the mf routines, so point ppc_md straight at the mf routines. We need to pass the cmd through to mf_reboot to make it work, but that seems reasonable. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-03-22[PATCH] powerpc: iseries: mf related cleanupsMichael Ellerman2-19/+24
Some cleanups in the iSeries code. - Make mf_display_progress() check mf_initialized rather than the caller. - Set mf_initialized in mf_init() rather than in setup.c - Then move mf_initialized into mf.c, the only place it's used. - Move the mf related logic from iSeries_progress() to mf_display_progress() - Use a #define to size the pending_event_prealloc array - Use that define in the initialsation loop rather than sizeof jiggery pokery - Remove stupid comment(s) - Mark stuff static and/or __init Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-03-22[PATCH] powerpc: Replace platform_is_lpar() with a firmware featureMichael Ellerman1-3/+7
It has been decreed that platform numbers are evil, so as a step in that direction, replace platform_is_lpar() with a FW_FEATURE_LPAR bit. Currently FW_FEATURE_LPAR really means i/pSeries LPAR, in the future we might have to clean that up if we need to be more specific about what LPAR actually means. But that's another patch ... Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-02-24[PATCH] powerpc: Fix runlatch performance issuesAnton Blanchard1-0/+1
The runlatch SPR can take a lot of time to write. My original runlatch code would set it on every exception entry even though most of the time this was not required. It would also continually set it in the idle loop, which is an issue on an SMT capable processor. Now we cache the runlatch value in a threadinfo bit, and only check for it in decrementer and hardware interrupt exceptions as well as the idle loop. Boot on POWER3, POWER5 and iseries, and compile tested on pmac32. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-02-23[PATCH] powerpc: Initialise hvlpevent_queue.lock correctlyMichael Ellerman1-0/+2
When I changed the hvlpevent_queue code to use a spinlock instead of a custom atomic (719d1cd86780c156f954fc34f34481adac197aec) I didn't initialise the lock anywhere, oops. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-13[PATCH] powerpc: Remove lppaca structure from the PACADavid Gibson4-10/+9
At present the lppaca - the structure shared with the iSeries hypervisor and phyp - is contained within the PACA, our own low-level per-cpu structure. This doesn't have to be so, the patch below removes it, making a separate array of lppaca structures. This saves approximately 500*NR_CPUS bytes of image size and kernel memory, because we don't need aligning gap between the Linux and hypervisor portions of every PACA. On the other hand it means an extra level of dereference in many accesses to the lppaca. The patch also gets rid of several places where we assign the paca address to a local variable for no particular reason. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-12[PATCH] powerpc: clean up iommu.h a bitStephen Rothwell4-0/+40
There was a function declared for CONFIG_PSERIES which no longer exists and the two function declarations for CONFIG_ISERIES have been moved into an include file in platforms/iseries since they are defined and used only there. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-12[PATCH] powerpc: iSeries fixes for build with no PCIStephen Rothwell2-2/+8
This reverts part of "ppc64 iSeries: allow build with no PCI" (145d01e4287b8cbf50f87c3283e33bf5c84e8468) which affected generic code and applies a fix in the arch specific code. Commit "partly merge iseries do_IRQ" (5fee9b3b39eb55c7e3619a3b36ceeabffeb8f144) introduced iSeries_get_irq which was only available if CONFIG_PCI is set. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-12[PATCH] powerpc: eliminate bitfields from ItLpNacaStephen Rothwell1-4/+1
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-12[PATCH] powerpc: remove bitfields from HvLpEventStephen Rothwell4-37/+16
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-11[PATCH] powerpc: Remove redundant setting of htab_addressMichael Ellerman1-6/+0
iSeries doesn't need to set the htab_address explicitly, htab_initialize() will do it for us later. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-11[PATCH] powerpc: Add ibm,pft-size to iSeries device treeMichael Ellerman1-2/+11
To make iSeries just a teensy bit less special, create ibm,pft-size properties in the iSeries device tree. We can then rely on htab_dt_scan_pftsize() to set ppc64_pft_size for us. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-11[PATCH] powerpc: Early debugging support for iSeriesMichael Ellerman1-3/+15
Connect iSeries up to the standard early debugging infrastructure. To actually use this you need to enable the iSeries early debugging in setup_64.c. Then after the messages are logged hit Ctrl-x Ctrl-x on your console to dump the Hypervisor console buffer. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-09[PATCH] powerpc: Remove ItLpRegSave area from the pacaDavid Gibson1-0/+7
On iSeries, the paca contains, amongst other things an ItLpRegSave structure used by the hypervisor to save registers. The hypervisor locates this area through a pointer at the beginning of the paca, so the structure itself can be located elsewhere. This patch moves the reg_save area out into its own array. This reduces the amount of iSeries specific gunk which is visible to general powerpc code via paca.h Built and booted on POWER5 LPAR and iSeries RS64. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-09powerpc: more iseries irq workStephen Rothwell1-20/+33
Make get_IRQ return a pending irq number so it can be handled in the powerpc geeneric code. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2006-01-09powerpc: partly merge iseries do_IRQStephen Rothwell3-10/+28
Hide some of the iseries details in iSeries_get_irq. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2006-01-09powerpc: use end_IRQ for iseries irqsStephen Rothwell1-11/+10
Encode the sub bus number into the real irq number (even though it is always zero for now) so that we have enough information to do the EOI in iseries_end_IRQ. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2006-01-09powerpc: cleanup iseries irq.cStephen Rothwell1-142/+118
Remove two useless counters. DeStropify. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-11-23[PATCH] powerpc: update my email addressOlof Johansson1-1/+1
Email address update, changing old work address to personal (permanent) one. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-16[PATCH] powerpc: pci_64 fixes & cleanupsBenjamin Herrenschmidt1-2/+1
I discovered that in some cases (PowerMac for example) we wouldn't properly map the PCI IO space on recent kernels. In addition, the code for initializing PCI host bridges was scattered all over the place with some duplication between platforms. This patch fixes the problem and does a small cleanup by creating a pcibios_alloc_controller() in pci_64.c that is similar to the one in pci_32.c (just takes an additional device node argument) that takes care of all the grunt allocation and initialisation work. It should work for both boot time and dynamically allocated PHBs. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-14powerpc: iSeries build fixesStephen Rothwell1-6/+0
log_plpar_hcall_return is only used on PPC_PSERIES, so move it closer to its users and inside ifdef CONFIG_PPC_PSERIES. remove the last vestiges of systemcfg in iSeries. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-11-14powerpc: make iSeries use generic virtual irq mappingStephen Rothwell1-22/+3
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-11-10Merge git://oak/home/sfr/kernels/iseries/workPaul Mackerras1-1/+0
2005-11-10powerpc: Move some extern declarations from C code into headersPaul Mackerras1-2/+1
This also make klimit have the same type on 32-bit as on 64-bit, namely unsigned long, and defines and initializes it in one place. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-10powerpc: remove some warnings when building iSeriesStephen Rothwell1-1/+0
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-11-10[PATCH] powerpc: merge code values for identifying platformsPaul Mackerras1-9/+14
This patch merges platform codes. systemcfg->platform is no longer used, systemcfg use in general is deprecated as much as possible (and renamed _systemcfg before it gets completely moved elsewhere in a future patch), _machine is now used on ppc64 along as ppc32. Platform codes aren't gone yet but we are getting a step closer. A bunch of asm code in head[_64].S is also turned into C code. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-10[PATCH] powerpc: Consolidate asm compatibility macrosDavid Gibson1-0/+1
This patch consolidates macros used to generate assembly for compatibility across different CPUs or configs. A new header, asm-powerpc/asm-compat.h contains the main compatibility macros. It uses some preprocessor magic to make the macros suitable both for use in .S files, and in inline asm in .c files. Headers (bitops.h, uaccess.h, atomic.h, bug.h) which had their own such compatibility macros are changed to use asm-compat.h. ppc_asm.h is now for use in .S files *only*, and a #error enforces that. As such, we're a lot more careless about namespace pollution here than in asm-compat.h. While we're at it, this patch adds a call to the PPC405_ERR77 macro in futex.h which should have had it already, but didn't. Built and booted on pSeries, Maple and iSeries (ARCH=powerpc). Built for 32-bit powermac (ARCH=powerpc) and Walnut (ARCH=ppc). Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-10Merge git://oak/home/sfr/kernels/iseries/workPaul Mackerras1-5/+19
2005-11-09[PATCH] sched: resched and cpu_idle reworkNick Piggin1-8/+2
Make some changes to the NEED_RESCHED and POLLING_NRFLAG to reduce confusion, and make their semantics rigid. Improves efficiency of resched_task and some cpu_idle routines. * In resched_task: - TIF_NEED_RESCHED is only cleared with the task's runqueue lock held, and as we hold it during resched_task, then there is no need for an atomic test and set there. The only other time this should be set is when the task's quantum expires, in the timer interrupt - this is protected against because the rq lock is irq-safe. - If TIF_NEED_RESCHED is set, then we don't need to do anything. It won't get unset until the task get's schedule()d off. - If we are running on the same CPU as the task we resched, then set TIF_NEED_RESCHED and no further action is required. - If we are running on another CPU, and TIF_POLLING_NRFLAG is *not* set after TIF_NEED_RESCHED has been set, then we need to send an IPI. Using these rules, we are able to remove the test and set operation in resched_task, and make clear the previously vague semantics of POLLING_NRFLAG. * In idle routines: - Enter cpu_idle with preempt disabled. When the need_resched() condition becomes true, explicitly call schedule(). This makes things a bit clearer (IMO), but haven't updated all architectures yet. - Many do a test and clear of TIF_NEED_RESCHED for some reason. According to the resched_task rules, this isn't needed (and actually breaks the assumption that TIF_NEED_RESCHED is only cleared with the runqueue lock held). So remove that. Generally one less locked memory op when switching to the idle thread. - Many idle routines clear TIF_POLLING_NRFLAG, and only set it in the inner most polling idle loops. The above resched_task semantics allow it to be set until before the last time need_resched() is checked before going into a halt requiring interrupt wakeup. Many idle routines simply never enter such a halt, and so POLLING_NRFLAG can be always left set, completely eliminating resched IPIs when rescheduling the idle task. POLLING_NRFLAG width can be increased, to reduce the chance of resched IPIs. Signed-off-by: Nick Piggin <npiggin@suse.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: Con Kolivas <kernel@kolivas.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09[PATCH] sched: disable preempt in idle tasksNick Piggin1-0/+4
Run idle threads with preempt disabled. Also corrected a bugs in arm26's cpu_idle (make it actually call schedule()). How did it ever work before? Might fix the CPU hotplugging hang which Nigel Cunningham noted. We think the bug hits if the idle thread is preempted after checking need_resched() and before going to sleep, then the CPU offlined. After calling stop_machine_run, the CPU eventually returns from preemption and into the idle thread and goes to sleep. The CPU will continue executing previous idle and have no chance to call play_dead. By disabling preemption until we are ready to explicitly schedule, this bug is fixed and the idle threads generally become more robust. From: alexs <ashepard@u.washington.edu> PPC build fix From: Yoichi Yuasa <yuasa@hh.iij4u.or.jp> MIPS build fix Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Yoichi Yuasa <yuasa@hh.iij4u.or.jp> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09ppc64: remove ppc_irq_dispatch_handlerStephen Rothwell1-6/+4
Use __do_IRQ instead. The only difference is that every controller is now assumed to have an end() routine (only xics_8259 did not). Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-11-09ppc64: allow iSeries to use IRQSTACKS againStephen Rothwell1-1/+17
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-11-07Merge ../linux-2.6Paul Mackerras6-114/+97
2005-11-07[PATCH] powerpc: Kill ppcdebugDavid Gibson4-47/+0
The ancient ppcdebug/PPCDBG mechanism is now only used in two places. First, in the hash setup code, one of the bits allows the size of the hash table to be reduced by a factor of 8 - which would be better accomplished with a command line option for that purpose. The other was a bunch of bus walking related messages in the iSeries code, which would seem to be insufficient reason to keep the mechanism. This patch removes the last traces of this mechanism. Built and booted on iSeries and pSeries POWER5 LPAR (ARCH=powerpc). Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-07[PATCH] ppc64: support 64k pagesBenjamin Herrenschmidt6-114/+97
Adds a new CONFIG_PPC_64K_PAGES which, when enabled, changes the kernel base page size to 64K. The resulting kernel still boots on any hardware. On current machines with 4K pages support only, the kernel will maintain 16 "subpages" for each 64K page transparently. Note that while real 64K capable HW has been tested, the current patch will not enable it yet as such hardware is not released yet, and I'm still verifying with the firmware architects the proper to get the information from the newer hypervisors. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-02Merge Paulus' treeStephen Rothwell4-3/+27
2005-11-02Merge iSeries include file moveStephen Rothwell18-51/+51
2005-11-02[PATCH] powerpc: Move naca.h to platforms/iseriesDavid Gibson4-3/+27
These days, the NACA only exists on iSeries. Therefore, this patch moves naca.h from include/asm-ppc64 to arch/powerpc/platforms/iseries. There was one file including naca.h outside of platforms/iseries - arch/ppc64/kernel/udbg_scc.c. However, that's obviously a hangover from older days. The include is not necessary, so this patch simply removes it. Built and booted on iSeries, built for G5 (which uses udbg_scc.o). Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-02merge filename and modify references to iseries/vio.hKelly Daly3-3/+3
Signed-off-by: Kelly Daly <kelly@au.ibm.com>
2005-11-02merge filename and modify references to iSeries/mf.hKelly Daly4-4/+4
Signed-off-by: Kelly Daly <kelly@au.ibm.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-02-10 11:39:41 +0300