summaryrefslogtreecommitdiff
path: root/arch/powerpc/platforms/85xx
AgeCommit message (Collapse)AuthorFilesLines
2011-05-19powerpc: Consolidate ipi message mux and demuxMilton Miller1-2/+4
Consolidate the mux and demux of ipi messages into smp.c and call a new smp_ops callback to actually trigger the ipi. The powerpc architecture code is optimised for having 4 distinct ipi triggers, which are mapped to 4 distinct messages (ipi many, ipi single, scheduler ipi, and enter debugger). However, several interrupt controllers only provide a single software triggered interrupt that can be delivered to each cpu. To resolve this limitation, each smp_ops implementation created a per-cpu variable that is manipulated with atomic bitops. Since these lines will be contended they are optimialy marked as shared_aligned and take a full cache line for each cpu. Distro kernels may have 2 or 3 of these in their config, each taking per-cpu space even though at most one will be in use. This consolidation removes smp_message_recv and replaces the single call actions cases with direct calls from the common message recognition loop. The complicated debugger ipi case with its muxed crash handling code is moved to debug_ipi_action which is now called from the demux code (instead of the multi-message action calling smp_message_recv). I put a call to reschedule_action to increase the likelyhood of correctly merging the anticipated scheduler_ipi() hook coming from the scheduler tree; that single required call can be inlined later. The actual message decode is a copy of the old pseries xics code with its memory barriers and cache line spacing, augmented with a per-cpu unsigned long based on the book-e doorbell code. The optional data is set via a callback from the implementation and is passed to the new cause-ipi hook along with the logical cpu number. While currently only the doorbell implemntation uses this data it should be almost zero cost to retrieve and pass it -- it adds a single register load for the argument from the same cache line to which we just completed a store and the register is dead on return from the call. I extended the data element from unsigned int to unsigned long in case some other code wanted to associate a pointer. The doorbell check_self is replaced by a call to smp_muxed_ipi_resend, conditioned on the CPU_DBELL feature. The ifdef guard could be relaxed to CONFIG_SMP but I left it with BOOKE for now. Also, the doorbell interrupt vector for book-e was not calling irq_enter and irq_exit, which throws off cpu accounting and causes code to not realize it is running in interrupt context. Add the missing calls. Signed-off-by: Milton Miller <miltonm@bga.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-05-04powerpc/irq: Stop exporting irq_mapGrant Likely1-20/+6
First step in eliminating irq_map[] table entirely Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-04-20powerpc/smp: smp_ops->kick_cpu() should be able to failMichael Ellerman1-2/+4
When we start a cpu we use smp_ops->kick_cpu(), which currently returns void, it should be able to fail. Convert it to return int, and update all uses. Convert all the current error cases to return -ENOENT, which is what would eventually be returned by __cpu_up() currently when it doesn't detect the cpu as coming up in time. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-03-29powerpc: Convert to new irq_* function namesThomas Gleixner8-18/+18
Scripted with coccinelle. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-03-29powerpc: Use proper accessors for IRQ_* flagsThomas Gleixner1-1/+1
Use the proper accessors instead of open access to irq_desc. Converted with coccinelle. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-03-15powerpc/85xx: Fix writing to spin table 'cpu-release-addr' on ppc64eKumar Gala1-1/+5
If the spin table is located in the linear mapping (which can happen if we have 4G or more of memory) we need to access the spin table via a cacheable coherent mapping like we do on ppc32 (and do explicit cache flush). See the following commit for the ppc32 version of this issue: commit d1d47ec6e62ab08d2ebb925fd9203abfad3adfbf Author: Peter Tyser <ptyser@xes-inc.com> Date: Fri Dec 18 16:50:37 2009 -0600 powerpc/85xx: Fix SMP when "cpu-release-addr" is in lowmem Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-03-10powerpc: platforms/85xx irq_data conversion.Lennert Buytenhek7-26/+32
Signed-off-by: Lennert Buytenhek <buytenh@secretlab.ca> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-01-13Merge branch 'for-next' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (43 commits) Documentation/trace/events.txt: Remove obsolete sched_signal_send. writeback: fix global_dirty_limits comment runtime -> real-time ppc: fix comment typo singal -> signal drivers: fix comment typo diable -> disable. m68k: fix comment typo diable -> disable. wireless: comment typo fix diable -> disable. media: comment typo fix diable -> disable. remove doc for obsolete dynamic-printk kernel-parameter remove extraneous 'is' from Documentation/iostats.txt Fix spelling milisec -> ms in snd_ps3 module parameter description Fix spelling mistakes in comments Revert conflicting V4L changes i7core_edac: fix typos in comments mm/rmap.c: fix comment sound, ca0106: Fix assignment to 'channel'. hrtimer: fix a typo in comment init/Kconfig: fix typo anon_inodes: fix wrong function name in comment fix comment typos concerning "consistent" poll: fix a typo in comment ... Fix up trivial conflicts in: - drivers/net/wireless/iwlwifi/iwl-core.c (moved to iwl-legacy.c) - fs/ext4/ext4.h Also fix missed 'diabled' typo in drivers/net/bnx2x/bnx2x.h while at it.
2011-01-03ppc: fix comment typo singal -> signalJustin P. Mattock1-1/+1
The patches below fixes a typo "singal" to "signal". Signed-off-by: Justin P. Mattock <justinmattock@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-01-01of/flattree: Add of_flat_dt_match() helper functionGrant Likely1-10/+10
This patch adds of_flat_dt_match() which tests a node for compatibility with a list of values and converts the relevant powerpc platform code to use it. This approach simplifies the board support code a bit. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Reviewed-by: Stephen Neuendorffer <stephen.neuendorffer@xilinx.com>
2010-10-25Merge branch 'for-linus' of ↵Linus Torvalds1-2/+209
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: (365 commits) ALSA: hda - Disable sticky PCM stream assignment for AD codecs ALSA: usb - Creative USB X-Fi volume knob support ALSA: ca0106: Use card specific dac id for mute controls. ALSA: ca0106: Allow different sound cards to use different SPI channel mappings. ALSA: ca0106: Create a nice spot for mapping channels to dacs. ALSA: ca0106: Move enabling of front dac out of hardcoded setup sequence. ALSA: ca0106: Pull out dac powering routine into separate function. ALSA: ca0106 - add Sound Blaster 5.1vx info. ASoC: tlv320dac33: Use usleep_range for delays ALSA: usb-audio: add Novation Launchpad support ALSA: hda - Add workarounds for CT-IBG controllers ALSA: hda - Fix wrong TLV mute bit for STAC/IDT codecs ASoC: tpa6130a2: Error handling for broken chip ASoC: max98088: Staticise m98088_eq_band ASoC: soc-core: Fix codec->name memory leak ALSA: hda - Apply ideapad quirk to Acer laptops with Cxt5066 ALSA: hda - Add some workarounds for Creative IBG ALSA: hda - Fix wrong SPDIF NID assignment for CA0110 ALSA: hda - Fix codec rename rules for ALC662-compatible codecs ALSA: hda - Add alc_init_jacks() call to other codecs ...
2010-10-25Merge branch 'topic/asoc' into for-linusTakashi Iwai1-2/+209
Conflicts: arch/powerpc/platforms/85xx/p1022_ds.c
2010-10-15powerpc/85xx: add DIU support to the Freecale P1022DS reference boardTimur Tabi1-2/+210
The Freescale P1022DS has an on-chip video controller called the DIU, and a driver for this device already exists. Update the platform file for the P1022DS reference board to enable the driver, and update the defconfig for Freescale MPC85xx boards to add the driver. [Edited to resolve header add/add conflict and drop #define DEBUG. -- broonie] Signed-off-by: Timur Tabi <timur@freescale.com> Acked-by: Kumar Gala <kumar.gala@freescale.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-10-14powerpc/fsl-booke: Add p5020 DS board supportKumar Gala3-0/+82
The P5020DS is in the same family of boards as the P4080 DS and thus shares the corenet_ds code. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-10-14powerpc/fsl-booke: Add support for FSL 64-bit e5500 coreKumar Gala1-1/+4
The new e5500 core is similar to the e500mc core but adds 64-bit support. We support running it in 32-bit mode as it is identical to the e500mc. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-10-14powerpc/fsl-booke: Add p3041 DS board supportKumar Gala3-0/+76
The P3041DS is in the same family of boards as the P4080DS and thus shares the corenet_ds code. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-10-14powerpc/p1022: Add probing for individual DMA channelsTimur Tabi1-0/+2
Like the MPC8610 HPCD, the P1022DS ASoC DMA driver probes on individual DMA channel nodes, so the DMA controller nodes' compatible string must be listed in p1022_ds_ids[] to work. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-10-14powerpc/85xx: flush dcache before resetting coresMatthew McClintock1-0/+50
When we do an mpic_reset_core we need to make sure the dcache is flushed. Signed-off-by: Matthew McClintock <msm@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-10-14powerpc/85xx: Minor fixups for kexec on 85xxMatthew McClintock1-13/+11
Make kexec_down_cpus atmoic since it will be incremented by all cores as they are coming down. Remove duplicate calls to mpc85xx_smp_kexec_down, now it's called by the crash and normal kexec pathway only once. Increase the timeout to wait for other cores to shutdown. Signed-off-by: Matthew McClintock <msm@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-10-14powerpc/85xx: Remove call to mpic_teardown_this_cpu in kexecMatthew McClintock1-2/+0
We no longer need to call this explicitly as a generic version is called by default. Signed-off-by: Matthew McClintock <msm@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-10-08powerpc/ppc64e: Fix link problem when building ppc64e_defconfigKumar Gala1-0/+7
arch/powerpc/platforms/built-in.o:(.toc1+0x18): undefined reference to `__early_start' This is due to the 85xx/smp.c not handling the 64-bit side properly. We need to set the entry point for secondary cores on ppc64e to generic_secondary_smp_init instead of __early_start that we due on ppc32. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-08-31powerpc/85xx: Fix compile issue with p1022_ds due to lmb rename to memblockKumar Gala1-2/+2
arch/powerpc/platforms/85xx/p1022_ds.c:22:23: error: linux/lmb.h: No such file or directory arch/powerpc/platforms/85xx/p1022_ds.c: In function 'p1022_ds_setup_arch': arch/powerpc/platforms/85xx/p1022_ds.c:100: error: implicit declaration of function 'memblock_end_of_DRAM' arch/powerpc/platforms/85xx/p1022_ds.c: At top level: arch/powerpc/platforms/85xx/p1022_ds.c:147: error: 'udbg_progress' undeclared here (not in a function) make[2]: *** [arch/powerpc/platforms/85xx/p1022_ds.o] Error 1 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-08-31powerpc/85xx: Fix compilation of mpc85xx_mds.cAlexander Graf1-0/+1
Commit 99d8238f berobbed the for_each loop of its iterator! Let's be nice and give it back, so it compiles for us. CC: Anton Vorontsov <avorontsov@mvista.com> Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-08-05Merge commit 'kumar/next' into nextBenjamin Herrenschmidt6-117/+403
2010-08-04powerpc/85xx: Introduce support for the Freescale P1022DS reference boardTimur Tabi3-0/+157
Introduce basic support for the Freescale P1022DS reference board, based on the Freescale BSP for this board. This patch excludes the DIU, SSI, and MMC/SD drivers. Only a 36-bit DTS is provided. Update mpc86xx_smp_defconfig and mpc85xx_defconfig to support the P1022DS. This means enabling 64-bit physical address support, increasing the maximum zone order to 12 (to allow the DIU driver to allocate large chunks), and clean up the audio options to disable the deprecated OSS support. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-08-04powerpc/tqm85xx: add a quirk for ti1520 PCMCIA bridgeDmitry Eremin-Solenikov1-0/+21
By default ti1520 bridge expects an input clock on CLOCK pin (to control power chip). However on this boards CLOCK should be generated by PCI1520 itself. Add a quirk that enables internal 16 KHz clock generation on this pin. Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-08-04powerpc/85xx: Cleanup QE initialization for MPC85xxMDS boardsAnton Vorontsov1-129/+143
The mpc85xx_mds_setup_arch() function is incomprehensible and unmaintainable. Factor out all QE specific stuff into mpc85xx_mds_qe_init() and mpc85xx_mds_reset_ucc_phys(). Also move QE stuff out of mpc85xx_mds_pic_init(). The diff is unreadable, but only because the code was so. ;-) It should be better now, and less indented. Signed-off-by: Anton Vorontsov <avorontsov@mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-08-04powerpc/85xx: Fix booting for P1021MDS boardsAnton Vorontsov1-6/+37
P1021 processors have no dedicated ROM to store the QE microcode, so the fimrware is stored externally, and it is U-Boot responsibility to load it. It might be that the board is booting without QE, e.g. currently U-Boot doesn't support QE for P1021MDS boards, which means that QE isn't initialized, and so the board hangs early at boot. This patch fixes the issue by marking QE as disabled and checking the state in the probing code. U-Boot should fixup the state if it initialized the QE. Signed-off-by: Anton Vorontsov <avorontsov@mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-08-04powerpc/85xx: Fix SWIOTLB initalization for MPC85xxMDS boardsAnton Vorontsov1-8/+8
The code inside '#ifdef CONFIG_QUICC_ENGINE' makes the mpc85xx_mds_setup_arch() return early if no QE nodes present, and so SWIOTLB is never initialized. This patch fixes the issue by moving SWIOTLB code above QE. Signed-off-by: Anton Vorontsov <avorontsov@mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-08-04Merge commit 'gcl/next' into nextBenjamin Herrenschmidt4-8/+8
2010-08-02powerpc/85xx: kexec for SMP 85xx BookE systemsMatthew McClintock1-0/+63
Adds support for kexec on 85xx machines for the BookE platform. Including support for SMP machines Based off work from Maxim Uvarov <muvarov@mvista.com> Signed-off-by: Matthew McClintock <msm@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-07-14lmb: rename to memblockYinghai Lu4-8/+8
via following scripts FILES=$(find * -type f | grep -vE 'oprofile|[^K]config') sed -i \ -e 's/lmb/memblock/g' \ -e 's/LMB/MEMBLOCK/g' \ $FILES for N in $(find . -name lmb.[ch]); do M=$(echo $N | sed 's/lmb/memblock/g') mv $N $M done and remove some wrong change like lmbench and dlmb etc. also move memblock.c from lib/ to mm/ Suggested-by: Ingo Molnar <mingo@elte.hu> Acked-by: "H. Peter Anvin" <hpa@zytor.com> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-07-09powerpc/book3e: More doorbell cleanups. Sample the PIR registerBenjamin Herrenschmidt1-1/+3
The doorbells use the content of the PIR register to match messages from other CPUs. This may or may not be the same as our linux CPU number, so using that as the "target" is no right. Instead, we sample the PIR register at boot on every processor and use that value subsequently when sending IPIs. We also use a per-cpu message mask rather than a global array which should limit cache line contention. Note: We could use the CPU number in the device-tree instead of the PIR register, as they are supposed to be equivalent. This might prove useful if doorbells are to be used to kick CPUs out of FW at boot time, thus before we can sample the PIR. This is however not the case now and using the PIR just works. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-05-25powerpc/85xx: Add P1021MDS board supportHaiying Wang1-3/+99
P1021 is a dual e500v2 core based SOC with: * 3 eTSECs (eTSEC1/3 RGMII, eTSEC2 SGMII on this board) * 2 PCIe Controller * 1 USB2.0 controller * eSDHC, eSPI, I2C, DUART * eLBC (NAND, BCSR, PMC0/1) * Security Engine (SEC 3.3.2) * Quicc Engine (QE) Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> Signed-off-by: Yu Liu <Yu.Liu@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-04-20powerpc/85xx/86xx: Fix build w/ CONFIG_PCI=nAnton Vorontsov1-2/+2
Currently some MPC85xx and MPC86xx boards fail to build without CONFIG_PCI: arch/powerpc/platforms/fsl_uli1575.c: In function 'quirk_final_uli5249': arch/powerpc/platforms/fsl_uli1575.c:234: error: implicit declaration of function 'pci_bus_for_each_resource' arch/powerpc/platforms/fsl_uli1575.c:234: error: expected ';' before '{' token cc1: warnings being treated as errors arch/powerpc/platforms/fsl_uli1575.c:223: warning: unused variable 'dummy' make[1]: *** [arch/powerpc/platforms/fsl_uli1575.o] Error 1 This patch fixes the issue by appending 'if PCI' condition when selecting FSL_ULI1575 Kconfig symbol. Signed-off-by: Anton Vorontsov <avorontsov@mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-03-09Merge commit 'kumar/next' into mergeBenjamin Herrenschmidt1-17/+17
2010-03-04powerpc/85xx: Convert socrates_fpga_pic_lock to raw_spinlockAnton Vorontsov1-17/+17
Interrupt controllers' hooks are executed in the atomic context, so they are not permitted to sleep (with RT kernels non-raw spinlocks are sleepable). So, socrates_fpga_pic_lock has to be a real (non-sleepable) spinlock. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-03-01Merge branch 'master' of /home/davem/src/GIT/linux-2.6/David S. Miller5-7/+28
Conflicts: drivers/firmware/iscsi_ibft.c
2010-02-26Merge commit 'origin/master' into nextBenjamin Herrenschmidt2-3/+4
Manual merge of: drivers/char/hvc_console.c drivers/char/hvc_console.h
2010-02-26Merge branch 'next-devicetree' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds1-2/+2
* 'next-devicetree' of git://git.secretlab.ca/git/linux-2.6: (41 commits) of: remove undefined request_OF_resource & release_OF_resource of/sparc: Remove sparc-local declaration of allnodes and devtree_lock of: move definition of of_chosen into common code. of: remove unused extern reference to devtree_lock of: put default string compare and #a/s-cell values into common header of/flattree: Don't assume HAVE_LMB of: protect linux/of.h with CONFIG_OF proc_devtree: fix THIS_MODULE without module.h of: Remove old and misplaced function declarations of/flattree: Make the kernel accept ePAPR style phandle information of/flattree: endian-convert members of boot_param_header of: assume big-endian properties, adding conversions where necessary of: use __be32 for cell value accessors of/flattree: use OF_ROOT_NODE_{SIZE,ADDR}_CELLS DEFAULT for fdt parsing of/flattree: use callback to setup initrd from /chosen proc_devtree: include linux/of.h of: make set_node_proc_entry private to proc_devtree.c of: include linux/proc_fs.h of/flattree: merge early_init_dt_scan_memory() common code of: add 'of_' prefix to machine_is_compatible() ...
2010-02-18powerpc/85xx: Add NOR, LEDs and PIB support for MPC8568E-MDS boardsAnton Vorontsov1-0/+3
This patch adds NOR Flash, LEDs and PIB support for MPC8568E-MDS boards. Plus, move bcsr node into localbus node, and add bcsr5 gpio-controller node. Some platform code modifications were also needed. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-02-17powerpc: Remove whitespace in irq chip name fieldsAnton Blanchard1-1/+1
Now we use printf style alignment there is no need to manually space these fields. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-02-13powerpc/85xx: Fix SMP when "cpu-release-addr" is in lowmemPeter Tyser1-2/+19
Recent U-Boot commit 5ccd29c3679b3669b0bde5c501c1aa0f325a7acb caused the "cpu-release-addr" device tree property to contain the physical RAM location that secondary cores were spinning at. Previously, the "cpu-release-addr" property contained a value referencing the boot page translation address range of 0xfffffxxx, which then indirectly accessed RAM. The "cpu-release-addr" is currently ioremapped and the secondary cores kicked. However, due to the recent change in "cpu-release-addr", it sometimes points to a memory location in low memory that cannot be ioremapped. For example on a P2020-based board with 512MB of RAM the following error occurs on bootup: <...> mpic: requesting IPIs ... __ioremap(): phys addr 0x1ffff000 is RAM lr c05df9a0 Unable to handle kernel paging request for data at address 0x00000014 Faulting instruction address: 0xc05df9b0 Oops: Kernel access of bad area, sig: 11 [#1] SMP NR_CPUS=2 P2020 RDB Modules linked in: <... eventual kernel panic> Adding logic to conditionally ioremap or access memory directly resolves the issue. Signed-off-by: Peter Tyser <ptyser@xes-inc.com> Signed-off-by: Nate Case <ncase@xes-inc.com> Reported-by: Dipen Dudhat <B09055@freescale.com> Tested-by: Dipen Dudhat <B09055@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-02-13powerpc/85xx: Fix oops during MSI driver probe on MPC85xxMDS boardsAnton Vorontsov1-1/+2
MPC85xx chips report the wrong value in feature reporting register, and that causes the following oops: Unable to handle kernel paging request for data at address 0x00000c00 Faulting instruction address: 0xc0019294 Oops: Kernel access of bad area, sig: 11 [#1] MPC8569 MDS Modules linked in: [...] NIP [c0019294] mpic_set_irq_type+0x2f0/0x368 LR [c0019124] mpic_set_irq_type+0x180/0x368 Call Trace: [ef851d60] [c0019124] mpic_set_irq_type+0x180/0x368 (unreliable) [ef851d90] [c007958c] __irq_set_trigger+0x44/0xd4 [ef851db0] [c007b550] set_irq_type+0x40/0x7c [ef851dc0] [c0004a60] irq_create_of_mapping+0xb4/0x114 [ef851df0] [c0004af0] irq_of_parse_and_map+0x30/0x40 [ef851e20] [c0405678] fsl_of_msi_probe+0x1a0/0x328 [ef851e60] [c02e6438] of_platform_device_probe+0x5c/0x84 [...] This is because mpic_alloc() assigns wrong values to mpic->isu_{size,shift,mask}, and things eventually break when _mpic_irq_read() is trying to use them. This patch fixes the issue by enabling MPIC_BROKEN_FRR_NIRQS quirk. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-02-09of: add 'of_' prefix to machine_is_compatible()Grant Likely1-2/+2
machine is compatible is an OF-specific call. It should have the of_ prefix to protect the global namespace. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Michal Simek <monstr@monstr.eu>
2010-02-09powerpc: Remove trailing space in messagesFrans Pop1-1/+1
Signed-off-by: Frans Pop <elendil@planet.nl> Cc: linuxppc-dev@ozlabs.org Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-02-03powerpc/85xx: Fix SMP when "cpu-release-addr" is in lowmemPeter Tyser1-2/+19
Recent U-Boot commit 5ccd29c3679b3669b0bde5c501c1aa0f325a7acb caused the "cpu-release-addr" device tree property to contain the physical RAM location that secondary cores were spinning at. Previously, the "cpu-release-addr" property contained a value referencing the boot page translation address range of 0xfffffxxx, which then indirectly accessed RAM. The "cpu-release-addr" is currently ioremapped and the secondary cores kicked. However, due to the recent change in "cpu-release-addr", it sometimes points to a memory location in low memory that cannot be ioremapped. For example on a P2020-based board with 512MB of RAM the following error occurs on bootup: <...> mpic: requesting IPIs ... __ioremap(): phys addr 0x1ffff000 is RAM lr c05df9a0 Unable to handle kernel paging request for data at address 0x00000014 Faulting instruction address: 0xc05df9b0 Oops: Kernel access of bad area, sig: 11 [#1] SMP NR_CPUS=2 P2020 RDB Modules linked in: <... eventual kernel panic> Adding logic to conditionally ioremap or access memory directly resolves the issue. Signed-off-by: Peter Tyser <ptyser@xes-inc.com> Signed-off-by: Nate Case <ncase@xes-inc.com> Reported-by: Dipen Dudhat <B09055@freescale.com> Tested-by: Dipen Dudhat <B09055@freescale.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-01-21mpc8569mds: Add bscr setting for rtbi modeLiu Yu-B132011-0/+24
Signed-off-by: Liu Yu <yu.liu@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-18powerpc/85xx: Wrong variable returned on errorRoel Kluin1-1/+1
The wrong variable was returned in the case of an error. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Cc: Kumar Gala <galak@kernel.crashing.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-12-09powerpc: Make "intspec" pointers in irq_host->xlate() constRoman Fietze1-1/+1
Writing a driver using SCLPC on the MPC5200B I detected, that the intspec arrays to map irqs to Linux virq cannot be const, because the mapping and xlate functions only take non const pointers. All those functions do not modify the intspec, so a const pointer could be used. Signed-off-by: Roman Fietze <roman.fietze@telemotive.de> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-01-12 06:40:33 +0300