| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- Enable BPF Kernel Functions (kfuncs) in the powerpc BPF JIT.
- Allow per-process DEXCR (Dynamic Execution Control Register) settings
via prctl, notably NPHIE which controls hashst/hashchk for ROP
protection.
- Install powerpc selftests in sub-directories. Note this changes the
way run_kselftest.sh needs to be invoked for powerpc selftests.
- Change fadump (Firmware Assisted Dump) to better handle memory
add/remove.
- Add support for passing additional parameters to the fadump kernel.
- Add support for updating the kdump image on CPU/memory add/remove
events.
- Other small features, cleanups and fixes.
Thanks to Andrew Donnellan, Andy Shevchenko, Aneesh Kumar K.V, Arnd
Bergmann, Benjamin Gray, Bjorn Helgaas, Christian Zigotzky, Christophe
Jaillet, Christophe Leroy, Colin Ian King, Cédric Le Goater, Dr. David
Alan Gilbert, Erhard Furtner, Frank Li, GUO Zihua, Ganesh Goudar, Geoff
Levand, Ghanshyam Agrawal, Greg Kurz, Hari Bathini, Joel Stanley, Justin
Stitt, Kunwu Chan, Li Yang, Lidong Zhong, Madhavan Srinivasan, Mahesh
Salgaonkar, Masahiro Yamada, Matthias Schiffer, Naresh Kamboju, Nathan
Chancellor, Nathan Lynch, Naveen N Rao, Nicholas Miehlbradt, Ran Wang,
Randy Dunlap, Ritesh Harjani, Sachin Sant, Shirisha Ganta, Shrikanth
Hegde, Sourabh Jain, Stephen Rothwell, sundar, Thorsten Blum, Vaibhav
Jain, Xiaowei Bao, Yang Li, and Zhao Chenhui.
* tag 'powerpc-6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (85 commits)
powerpc/fadump: Fix section mismatch warning
powerpc/85xx: fix compile error without CONFIG_CRASH_DUMP
powerpc/fadump: update documentation about bootargs_append
powerpc/fadump: pass additional parameters when fadump is active
powerpc/fadump: setup additional parameters for dump capture kernel
powerpc/pseries/fadump: add support for multiple boot memory regions
selftests/powerpc/dexcr: Fix spelling mistake "predicition" -> "prediction"
KVM: PPC: Book3S HV nestedv2: Fix an error handling path in gs_msg_ops_kvmhv_nestedv2_config_fill_info()
KVM: PPC: Fix documentation for ppc mmu caps
KVM: PPC: code cleanup for kvmppc_book3s_irqprio_deliver
KVM: PPC: Book3S HV nestedv2: Cancel pending DEC exception
powerpc/xmon: Check cpu id in commands "c#", "dp#" and "dx#"
powerpc/code-patching: Use dedicated memory routines for patching
powerpc/code-patching: Test patch_instructions() during boot
powerpc64/kasan: Pass virtual addresses to kasan_init_phys_region()
powerpc: rename SPRN_HID2 define to SPRN_HID2_750FX
powerpc: Fix typos
powerpc/eeh: Fix spelling of the word "auxillary" and update comment
macintosh/ams: Fix unused variable warning
powerpc/Makefile: Remove bits related to the previous use of -mcmodel=large
...
|
|
There are places where CONFIG_MODULES guards the code that depends on
memory allocation being done with module_alloc().
Replace CONFIG_MODULES with CONFIG_EXECMEM in such places.
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
|
|
The patching page set up as a writable alias may be in quadrant 0
(userspace) if the temporary mm path is used. This causes sanitiser
failures if so. Sanitiser failures also occur on the non-mm path
because the plain memset family is instrumented, and KASAN treats the
patching window as poisoned.
Introduce locally defined patch_* variants of memset that perform an
uninstrumented lower level set, as well as detecting write errors like
the original single patch variant does.
copy_to_user() is not correct here, as the PTE makes it a proper kernel
page (the EAA is privileged access only, RW). It just happens to be in
quadrant 0 because that's the hardware's mechanism for using the current
PID vs PID 0 in translations. Importantly, it's incorrect to allow user
page accesses.
Now that the patching memsets are used, we also propagate a failure up
to the caller as the single patch variant does.
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240325052815.854044-2-bgray@linux.ibm.com
|
|
patch_instruction() entails setting up pte, patching the instruction,
clearing the pte and flushing the tlb. If multiple instructions need
to be patched, every instruction would have to go through the above
drill unnecessarily. Instead, introduce patch_instructions() function
that sets up the pte, clears the pte and flushes the tlb only once
per page range of instructions to be patched. Duplicate most of the
patch_instruction() code instead of merging with it, to avoid the
performance degradation observed on ppc32, for patch_instruction(),
with the code path merged. Also, setup poking_init() always as BPF
expects poking_init() to be setup even when STRICT_KERNEL_RWX is off.
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Acked-by: Song Liu <song@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231020141358.643575-2-hbathini@linux.ibm.com
|
|
failure
Commit c28c15b6d28a ("powerpc/code-patching: Use temporary mm for
Radix MMU") added a hwsync for when __patch_instruction() fails,
we results in a quite odd unbalanced logic.
Instead of calling mb() when __patch_instruction() returns an error,
call mb() in the __patch_instruction()'s error path directly.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/e88b154eaf2efd9ff177d472d3411dcdec8ff4f5.1696675567.git.christophe.leroy@csgroup.eu
|
|
Nathan reported that the new per-cpu mm patching oopses if DEBUG_VM is
enabled:
------------[ cut here ]------------
kernel BUG at arch/powerpc/mm/pgtable.c:333!
Oops: Exception in kernel mode, sig: 5 [#1]
LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA PowerNV
Modules linked in:
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.1.0-rc2+ #1
Hardware name: IBM PowerNV (emulated by qemu) POWER9 0x4e1200 opal:v7.0 PowerNV
...
NIP assert_pte_locked+0x180/0x1a0
LR assert_pte_locked+0x170/0x1a0
Call Trace:
0x60000000 (unreliable)
patch_instruction+0x618/0x6d0
arch_prepare_kprobe+0xfc/0x2d0
register_kprobe+0x520/0x7c0
arch_init_kprobes+0x28/0x3c
init_kprobes+0x108/0x184
do_one_initcall+0x60/0x2e0
kernel_init_freeable+0x1f0/0x3e0
kernel_init+0x34/0x1d0
ret_from_kernel_thread+0x5c/0x64
It's caused by the assert_spin_locked() failing in assert_pte_locked().
The assert fails because the PTE was unlocked in text_area_cpu_up_mm(),
and never relocked.
The PTE page shouldn't be freed, the patching_mm is only used for
patching on this CPU, only that single PTE is ever mapped, and it's only
unmapped at CPU offline.
In fact assert_pte_locked() has a special case to ignore init_mm
entirely, and the patching_mm is more-or-less like init_mm, so possibly
the check could be skipped for patching_mm too.
But for now be conservative, and use the proper PTE accessors at
patching time, so that the PTE lock is held while the PTE is used. That
also avoids the warning in assert_pte_locked().
With that it's no longer necessary to save the PTE in
cpu_patching_context for the mm_patch_enabled() case.
Fixes: c28c15b6d28a ("powerpc/code-patching: Use temporary mm for Radix MMU")
Reported-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221216125913.990972-1-mpe@ellerman.id.au
|
|
after init
Once init section is freed, attempting to patch init code
ends up in the weed.
Commit 51c3c62b58b3 ("powerpc: Avoid code patching freed init sections")
protected patch_instruction() against that, but it is the responsibility
of the caller to ensure that the patched memory is valid.
All callers have now been verified and fixed so the check
can be removed.
This improves ftrace activation by about 2% on 8xx.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/504310828f473d424e2ed229eff57bf075f52796.1669969781.git.christophe.leroy@csgroup.eu
|
|
No need to have one implementation of patch_instruction() for
CONFIG_STRICT_KERNEL_RWX and one for !CONFIG_STRICT_KERNEL_RWX.
In patch_instruction(), call raw_patch_instruction() when
!CONFIG_STRICT_KERNEL_RWX.
In poking_init(), bail out immediately, it will be equivalent
to the weak default implementation.
Everything else is declared static and will be discarded by
GCC when !CONFIG_STRICT_KERNEL_RWX.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/f67d2a109404d03e8fdf1ea15388c8778337a76b.1669969781.git.christophe.leroy@csgroup.eu
|
|
With the temp mm context support, there are CPU local variables to hold
the patch address and pte. Use these in the non-temp mm path as well
instead of adding a level of indirection through the text_poke_area
vm_struct and pointer chasing the pte.
As both paths use these fields now, there is no need to let unreferenced
variables be dropped by the compiler, so it is cleaner to merge them
into a single context struct. This has the additional benefit of
removing a redundant CPU local pointer, as only one of cpu_patching_mm /
text_poke_area is ever used, while remaining well-typed. It also groups
each CPU's data into a single cacheline.
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
[mpe: Shorten name to 'area' as suggested by Christophe]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221109045112.187069-10-bgray@linux.ibm.com
|
|
x86 supports the notion of a temporary mm which restricts access to
temporary PTEs to a single CPU. A temporary mm is useful for situations
where a CPU needs to perform sensitive operations (such as patching a
STRICT_KERNEL_RWX kernel) requiring temporary mappings without exposing
said mappings to other CPUs. Another benefit is that other CPU TLBs do
not need to be flushed when the temporary mm is torn down.
Mappings in the temporary mm can be set in the userspace portion of the
address-space.
Interrupts must be disabled while the temporary mm is in use. HW
breakpoints, which may have been set by userspace as watchpoints on
addresses now within the temporary mm, are saved and disabled when
loading the temporary mm. The HW breakpoints are restored when unloading
the temporary mm. All HW breakpoints are indiscriminately disabled while
the temporary mm is in use - this may include breakpoints set by perf.
Use the `poking_init` init hook to prepare a temporary mm and patching
address. Initialize the temporary mm using mm_alloc(). Choose a
randomized patching address inside the temporary mm userspace address
space. The patching address is randomized between PAGE_SIZE and
DEFAULT_MAP_WINDOW-PAGE_SIZE.
Bits of entropy with 64K page size on BOOK3S_64:
bits of entropy = log2(DEFAULT_MAP_WINDOW_USER64 / PAGE_SIZE)
PAGE_SIZE=64K, DEFAULT_MAP_WINDOW_USER64=128TB
bits of entropy = log2(128TB / 64K)
bits of entropy = 31
The upper limit is DEFAULT_MAP_WINDOW due to how the Book3s64 Hash MMU
operates - by default the space above DEFAULT_MAP_WINDOW is not
available. Currently the Hash MMU does not use a temporary mm so
technically this upper limit isn't necessary; however, a larger
randomization range does not further "harden" this overall approach and
future work may introduce patching with a temporary mm on Hash as well.
Randomization occurs only once during initialization for each CPU as it
comes online.
The patching page is mapped with PAGE_KERNEL to set EAA[0] for the PTE
which ignores the AMR (so no need to unlock/lock KUAP) according to
PowerISA v3.0b Figure 35 on Radix.
Based on x86 implementation:
commit 4fc19708b165
("x86/alternatives: Initialize temporary mm for patching")
and:
commit b3fd8e83ada0
("x86/alternatives: Use temporary mm for text poking")
From: Benjamin Gray <bgray@linux.ibm.com>
Synchronisation is done according to ISA 3.1B Book 3 Chapter 13
"Synchronization Requirements for Context Alterations". Switching the mm
is a change to the PID, which requires a CSI before and after the change,
and a hwsync between the last instruction that performs address
translation for an associated storage access.
Instruction fetch is an associated storage access, but the instruction
address mappings are not being changed, so it should not matter which
context they use. We must still perform a hwsync to guard arbitrary
prior code that may have accessed a userspace address.
TLB invalidation is local and VA specific. Local because only this core
used the patching mm, and VA specific because we only care that the
writable mapping is purged. Leaving the other mappings intact is more
efficient, especially when performing many code patches in a row (e.g.,
as ftrace would).
Signed-off-by: Christopher M. Riedl <cmr@bluescreens.de>
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
[mpe: Use mm_alloc() per 107b6828a7cd ("x86/mm: Use mm_alloc() in poking_init()")]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221109045112.187069-9-bgray@linux.ibm.com
|
|
BUG_ON() when failing to initialise the code patching window is
unnecessary, and use of BUG_ON is discouraged. We don't set
poking_init_done in this case, so failure to init the boot CPU will
result in a strict RWX error when a following patch_instruction uses
raw_patch_instruction. If it only fails for later CPUs, they won't be
onlined in the first place.
The return value of cpuhp_setup_state() is also >= 0 on success,
so check for < 0.
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221109045112.187069-3-bgray@linux.ibm.com
|
|
Since commit 591b4b268435 ("powerpc/code-patching: Pre-map patch area")
the patch area is premapped so intermediate page tables are already
allocated.
Use __set_pte_at() directly instead of the heavy map_kernel_page(),
at for unmapping just do a pte_clear() followed by a flush.
__set_pte_at() can be used directly without the filters in
set_pte_at() because we are mapping a normal page non executable.
Make sure gcc knows text_poke_area is page aligned in order to
optimise the flush.
This change reduces by 66% the time needed to activate ftrace on
an 8xx (588000 tb ticks instead of 1744000).
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
[mpe: Add ptesync needed on radix to avoid spurious fault]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220815114840.1468656-1-mpe@ellerman.id.au
|
|
Instead of returning -EPERM when patch_instruction() fails,
just return what patch_instruction returns.
That simplifies ftrace_modify_code():
0: 94 21 ff c0 stwu r1,-64(r1)
4: 93 e1 00 3c stw r31,60(r1)
8: 7c 7f 1b 79 mr. r31,r3
c: 40 80 00 30 bge 3c <ftrace_modify_code+0x3c>
10: 93 c1 00 38 stw r30,56(r1)
14: 7c 9e 23 78 mr r30,r4
18: 7c a4 2b 78 mr r4,r5
1c: 80 bf 00 00 lwz r5,0(r31)
20: 7c 1e 28 40 cmplw r30,r5
24: 40 82 00 34 bne 58 <ftrace_modify_code+0x58>
28: 83 c1 00 38 lwz r30,56(r1)
2c: 7f e3 fb 78 mr r3,r31
30: 83 e1 00 3c lwz r31,60(r1)
34: 38 21 00 40 addi r1,r1,64
38: 48 00 00 00 b 38 <ftrace_modify_code+0x38>
38: R_PPC_REL24 patch_instruction
Before:
0: 94 21 ff c0 stwu r1,-64(r1)
4: 93 e1 00 3c stw r31,60(r1)
8: 7c 7f 1b 79 mr. r31,r3
c: 40 80 00 4c bge 58 <ftrace_modify_code+0x58>
10: 93 c1 00 38 stw r30,56(r1)
14: 7c 9e 23 78 mr r30,r4
18: 7c a4 2b 78 mr r4,r5
1c: 80 bf 00 00 lwz r5,0(r31)
20: 7c 08 02 a6 mflr r0
24: 90 01 00 44 stw r0,68(r1)
28: 7c 1e 28 40 cmplw r30,r5
2c: 40 82 00 48 bne 74 <ftrace_modify_code+0x74>
30: 7f e3 fb 78 mr r3,r31
34: 48 00 00 01 bl 34 <ftrace_modify_code+0x34>
34: R_PPC_REL24 patch_instruction
38: 80 01 00 44 lwz r0,68(r1)
3c: 20 63 00 00 subfic r3,r3,0
40: 83 c1 00 38 lwz r30,56(r1)
44: 7c 63 19 10 subfe r3,r3,r3
48: 7c 08 03 a6 mtlr r0
4c: 83 e1 00 3c lwz r31,60(r1)
50: 38 21 00 40 addi r1,r1,64
54: 4e 80 00 20 blr
It improves ftrace activation/deactivation duration by about 3%.
Modify patch_instruction() return on failure to -EPERM in order to
match with ftrace expectations. Other users of patch_instruction()
do not care about the exact error value returned.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/49a8597230713e2633e7d9d7b56140787c4a7e20.1652074503.git.christophe.leroy@csgroup.eu
|
|
create_branch() is a good candidate for inlining because:
- Flags can be folded in.
- Range tests are likely to be already done.
Hence reducing the create_branch() to only a set of instructions.
So inline it.
It improves ftrace activation by 10%.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/69851cc9a7bf8f03d025e6d29e165f2d0bd3bb6e.1652074503.git.christophe.leroy@csgroup.eu
|
|
Test in is_offset_in_branch_range() and is_offset_in_cond_branch_range()
are simple tests that are worth inlining.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/a05be0ccb7373e6a9789a1988fcd0c810f5f9269.1652074503.git.christophe.leroy@csgroup.eu
|
|
It's only during early startup that poking_init() is not done yet,
for instance when calling ftrace_init().
Once poking_init() has been called there must be a poking area, no
need to check it everytime patch_instruction() is called.
ftrace activation time is reduced by 7% with the change on an 8xx.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/8d6088aca7b63247377b6d9e4897d08d935fbe93.1647962456.git.christophe.leroy@csgroup.eu
|
|
Once init is done, initmem is freed forever so no need to
test system_state at every call to patch_instruction().
Use jump_label.
This reduces by 2% the time needed to activate ftrace on an 8xx.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/0aee964721cab7316cffde21a2ca223cee14d373.1647962456.git.christophe.leroy@csgroup.eu
|
|
CONFIG_MODULES
If CONFIG_MODULES is not set, there is no point in checking
whether text is in module area.
This reduced the time needed to activate/deactivate ftrace
by more than 10% on an 8xx.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/f3c701cce00a38620788c0fc43ff0b611a268c54.1647962456.git.christophe.leroy@csgroup.eu
|
|
Paul reported a warning with DEBUG_ATOMIC_SLEEP=y:
BUG: sleeping function called from invalid context at include/linux/sched/mm.h:256
in_atomic(): 0, irqs_disabled(): 1, non_block: 0, pid: 1, name: swapper/0
preempt_count: 0, expected: 0
...
Call Trace:
dump_stack_lvl+0xa0/0xec (unreliable)
__might_resched+0x2f4/0x310
kmem_cache_alloc+0x220/0x4b0
__pud_alloc+0x74/0x1d0
hash__map_kernel_page+0x2cc/0x390
do_patch_instruction+0x134/0x4a0
arch_jump_label_transform+0x64/0x78
__jump_label_update+0x148/0x180
static_key_enable_cpuslocked+0xd0/0x120
static_key_enable+0x30/0x50
check_kvm_guest+0x60/0x88
pSeries_smp_probe+0x54/0xb0
smp_prepare_cpus+0x3e0/0x430
kernel_init_freeable+0x20c/0x43c
kernel_init+0x30/0x1a0
ret_from_kernel_thread+0x5c/0x64
Peter pointed out that this is because do_patch_instruction() has
disabled interrupts, but then map_patch_area() calls map_kernel_page()
then hash__map_kernel_page() which does a sleeping memory allocation.
We only see the warning in KVM guests with SMT enabled, which is not
particularly common, or on other platforms if CONFIG_KPROBES is
disabled, also not common. The reason we don't see it in most
configurations is that another path that happens to have interrupts
enabled has allocated the required page tables for us, eg. there's a
path in kprobes init that does that. That's just pure luck though.
As Christophe suggested, the simplest solution is to do a dummy
map/unmap when we initialise the patching, so that any required page
table levels are pre-allocated before the first call to
do_patch_instruction(). This works because the unmap doesn't free any
page tables that were allocated by the map, it just clears the PTE,
leaving the page table levels there for the next map.
Reported-by: Paul Menzel <pmenzel@molgen.mpg.de>
Debugged-by: Peter Zijlstra <peterz@infradead.org>
Suggested-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220223015821.473097-1-mpe@ellerman.id.au
|
|
Code patching selftests are half of code-patching.c.
As they are guarded by CONFIG_CODE_PATCHING_SELFTESTS,
they'd be better in their own file.
Also add a missing __init for instr_is_branch_to_addr()
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/c0c30504f04eb546a48ff77127a8bccd12a3d809.1638446239.git.christophe.leroy@csgroup.eu
|
|
To enable moving selftests in their own C file in following patch,
move instr_is_branch_iform() and instr_is_branch_bform()
to code-patching.h
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/fca0f3b191211b3681020885a611bf73eef20563.1638446239.git.christophe.leroy@csgroup.eu
|
|
patch_exception() is dedicated to book3e/64 is nothing more than
a normal use of patch_branch(), so move it into a place dedicated
to book3e/64.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/0968622b98b1fb51838c35b844c42ad6609de62e.1638446239.git.christophe.leroy@csgroup.eu
|
|
Use the dedicated test_trampoline function for testing prefixed
patching like other tests and remove the hand coded assembly stuff.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/a450ef3f8653f75e1bd9aaf7a3889d379752f33b.1638446239.git.christophe.leroy@csgroup.eu
|
|
Do not silentely ignore a failure of create_branch() in
patch_branch(). Return -ERANGE.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/8540cb64b1f06710eaf41e3835c7ba3e21fa2b05.1638446239.git.christophe.leroy@csgroup.eu
|
|
Split do_patch_instruction() in two functions, the caller doing the
spin locking and the callee doing everything else.
And remove a few unnecessary initialisations and intermediate
variables.
This allows the callee to return from anywhere in the function.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/dbc85980a0d2a935731b272e8907e8bb1d8fc8c5.1638446239.git.christophe.leroy@csgroup.eu
|
|
pXd_offset() doesn't return NULL. When the base is NULL, it
still adds the offset.
Use pXd_none() to check validity instead. It also improves
performance by folding out none existing levels as pXd_none()
always returns 0 in that case.
Such an error is unexpected, use WARN_ON() so that the caller
doesn't have to worry about it, and drop the returned value.
And now that unmap_patch_area() doesn't return error, we can
take into account the error returned by __patch_instruction().
While at it, remove the 'inline' property which is useless.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/299804b117fae35c786c827536c91f25352e279b.1638446239.git.christophe.leroy@csgroup.eu
|
|
Use real errors instead of using -1 as error, so that errors
returned by callees can be used towards callers.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/85259d894069e47f915ea580b169e1adbeec7a61.1638446239.git.christophe.leroy@csgroup.eu
|
|
A new state has been added by commit d2635f2012a4 ("mm: create a new
system state and fix core_kernel_text()"). That state tells when
initmem is about to be released and is redundant with init_mem_is_free.
Remove init_mem_is_free.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/ad8c3ccb39c8edaa89fd3eda1cc7218baea1cde5.1638446239.git.christophe.leroy@csgroup.eu
|
|
code-patching has been working for years now, time has come to
remove debugging messages.
Change useful message to KERN_INFO and remove other ones.
Also add KERN_ERR to check() macro and change it into a do/while
to make checkpatch happy.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/3ff9823c0a812a8a145d979a9600a6d4591b80ee.1638446239.git.christophe.leroy@csgroup.eu
|
|
Some functions defined in 'arch/powerpc/lib' are deserving of an `__init`
macro attribute. These functions are only called by other initialization
functions and therefore should inherit the attribute.
Also, change function declarations in header files to include `__init`.
Signed-off-by: Nick Child <nick.child@ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211216220035.605465-3-nick.child@ibm.com
|
|
In order to stop using 'struct ppc_inst' on PPC32,
define a ppc_inst_t typedef.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/fe5baa2c66fea9db05a8b300b3e8d2880a42596c.1638208156.git.christophe.leroy@csgroup.eu
|
|
This reverts commit 8b8a8f0ab3f5519e45c526f826a655817486c5bb.
As reported[1] by Sachin this causes problems with ftrace, and it also
causes the code patching selftests to fail as reported[2] by Stephen.
So revert it for now.
1: https://lore.kernel.org/linuxppc-dev/3668743C-09DF-4673-B15C-2FFE2A57F7D7@linux.vnet.ibm.com/
2: https://lore.kernel.org/linuxppc-dev/20211126161747.1f7795b0@canb.auug.org.au/
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Today, patch_instruction() assumes that it is called exclusively on
valid addresses, and only checks that it is not called on an init
address after init section has been freed.
Improve verification by calling kernel_text_address() instead.
kernel_text_address() already includes a verification of
initmem release.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/bc683d499a411730504b132a924de0ccc2ef1f79.1636971137.git.christophe.leroy@csgroup.eu
|
|
Add a helper to check if a given offset is within the branch range for a
powerpc conditional branch instruction, and update some sites to use the
new helper.
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/442b69a34ced32ca346a0d9a855f3f6cfdbbbd41.1633464148.git.naveen.n.rao@linux.vnet.ibm.com
|
|
setup_text_poke_area() is a late init call so it runs before
mark_rodata_ro() and after the init calls. This lets all the init code
patching simply write to their locations. In the future, kprobes is
going to allocate its instruction pages RO which means they will need
setup_text__poke_area() to have been already called for their code
patching. However, init_kprobes() (which allocates and patches some
instruction pages) is an early init call so it happens before
setup_text__poke_area().
start_kernel() calls poking_init() before any of the init calls. On
powerpc, poking_init() is currently a nop. setup_text_poke_area() relies
on kernel virtual memory, cpu hotplug and per_cpu_areas being setup.
setup_per_cpu_areas(), boot_cpu_hotplug_init() and mm_init() are called
before poking_init().
Turn setup_text_poke_area() into poking_init().
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Russell Currey <ruscur@russell.cc>
[mpe: Fold in missing prototype for poking_init() from lkp]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210609013431.9805-3-jniethe5@gmail.com
|
|
'struct ppc_inst' is an internal representation of an instruction, but
in-memory instructions are and will remain a table of 'u32' forever.
Replace all 'struct ppc_inst *' used for locating an instruction in
memory by 'u32 *'. This removes a lot of undue casts to 'struct
ppc_inst *'.
It also helps locating ab-use of 'struct ppc_inst' dereference.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
[mpe: Fix ppc_inst_next(), use u32 instead of unsigned int]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/7062722b087228e42cbd896e39bfdf526d6a340a.1621516826.git.christophe.leroy@csgroup.eu
|
|
tests.
'struct ppc_inst' is meant to represent an instruction internally, it
is not meant to dereference code in memory.
For testing code patching, use patch_instruction() to properly
write into memory the code to be tested.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/d8425fb42a4adebc35b7509f121817eeb02fac31.1621516826.git.christophe.leroy@csgroup.eu
|
|
instr_is_branch_to_addr() is only used in code-patching.c
Make it static.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/5f6b9c8c83170ed310953eac2f5b14539bfc964a.1621516826.git.christophe.leroy@csgroup.eu
|
|
code-patching, feature-fixups)
'struct ppc_inst' is an internal structure to represent an instruction,
it is not directly the representation of that instruction in text code.
It is not meant to map and dereference code.
Dereferencing code directly through 'struct ppc_inst' has two main issues:
- On powerpc, structs are expected to be 8 bytes aligned while code is
spread every 4 byte.
- Should a non prefixed instruction lie at the end of the page and the
following page not be mapped, it would generate a page fault.
In-memory code must be accessed with ppc_inst_read().
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/c9a1201dd0a66b4a0f91f0fb46d9385cbf030feb.1621516826.git.christophe.leroy@csgroup.eu
|
|
In order to simplify use on PPC32, change ppc_inst_as_u64()
into ppc_inst_as_ulong() that returns the 32 bits instruction
on PPC32.
Will be used when porting OPTPROBES to PPC32.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/22cadf29620664b600b82026d2a72b8b23351777.1618927318.git.christophe.leroy@csgroup.eu
|
|
__put_user_asm_goto() is internal to uaccess.h
Use __put_kernel_nofault() instead. The generated code is identical.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/3e32c4f0361933909368b68f5ee569e5de661c1b.1615398498.git.christophe.leroy@csgroup.eu
|
|
__patch_instruction() is the only user of __put_user_asm() outside
of asm/uaccess.h
Switch to the new __put_user_asm_goto() to enable retirement of
__put_user_asm() in a later patch.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/b9745b122f4a9ae72cef445c61320022ab8b77b7.1599216721.git.christophe.leroy@csgroup.eu
|
|
Use is_vmalloc_or_module_addr() instead of is_vmalloc_addr()
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/7d884db0e5a6f521331639d8c0f13e520d5a4fef.1593428200.git.christophe.leroy@csgroup.eu
|
|
Patch series "mm: consolidate definitions of page table accessors", v2.
The low level page table accessors (pXY_index(), pXY_offset()) are
duplicated across all architectures and sometimes more than once. For
instance, we have 31 definition of pgd_offset() for 25 supported
architectures.
Most of these definitions are actually identical and typically it boils
down to, e.g.
static inline unsigned long pmd_index(unsigned long address)
{
return (address >> PMD_SHIFT) & (PTRS_PER_PMD - 1);
}
static inline pmd_t *pmd_offset(pud_t *pud, unsigned long address)
{
return (pmd_t *)pud_page_vaddr(*pud) + pmd_index(address);
}
These definitions can be shared among 90% of the arches provided
XYZ_SHIFT, PTRS_PER_XYZ and xyz_page_vaddr() are defined.
For architectures that really need a custom version there is always
possibility to override the generic version with the usual ifdefs magic.
These patches introduce include/linux/pgtable.h that replaces
include/asm-generic/pgtable.h and add the definitions of the page table
accessors to the new header.
This patch (of 12):
The linux/mm.h header includes <asm/pgtable.h> to allow inlining of the
functions involving page table manipulations, e.g. pte_alloc() and
pmd_alloc(). So, there is no point to explicitly include <asm/pgtable.h>
in the files that include <linux/mm.h>.
The include statements in such cases are remove with a simple loop:
for f in $(git grep -l "include <linux/mm.h>") ; do
sed -i -e '/include <asm\/pgtable.h>/ d' $f
done
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Cain <bcain@codeaurora.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Greg Ungerer <gerg@linux-m68k.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Guo Ren <guoren@kernel.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ley Foon Tan <ley.foon.tan@intel.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Nick Hu <nickhu@andestech.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vincent Chen <deanbo422@gmail.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: http://lkml.kernel.org/r/20200514170327.31389-1-rppt@kernel.org
Link: http://lkml.kernel.org/r/20200514170327.31389-2-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- Support for userspace to send requests directly to the on-chip GZIP
accelerator on Power9.
- Rework of our lockless page table walking (__find_linux_pte()) to
make it safe against parallel page table manipulations without
relying on an IPI for serialisation.
- A series of fixes & enhancements to make our machine check handling
more robust.
- Lots of plumbing to add support for "prefixed" (64-bit) instructions
on Power10.
- Support for using huge pages for the linear mapping on 8xx (32-bit).
- Remove obsolete Xilinx PPC405/PPC440 support, and an associated sound
driver.
- Removal of some obsolete 40x platforms and associated cruft.
- Initial support for booting on Power10.
- Lots of other small features, cleanups & fixes.
Thanks to: Alexey Kardashevskiy, Alistair Popple, Andrew Donnellan,
Andrey Abramov, Aneesh Kumar K.V, Balamuruhan S, Bharata B Rao, Bulent
Abali, Cédric Le Goater, Chen Zhou, Christian Zigotzky, Christophe
JAILLET, Christophe Leroy, Dmitry Torokhov, Emmanuel Nicolet, Erhard F.,
Gautham R. Shenoy, Geoff Levand, George Spelvin, Greg Kurz, Gustavo A.
R. Silva, Gustavo Walbon, Haren Myneni, Hari Bathini, Joel Stanley,
Jordan Niethe, Kajol Jain, Kees Cook, Leonardo Bras, Madhavan
Srinivasan., Mahesh Salgaonkar, Markus Elfring, Michael Neuling, Michal
Simek, Nathan Chancellor, Nathan Lynch, Naveen N. Rao, Nicholas Piggin,
Oliver O'Halloran, Paul Mackerras, Pingfan Liu, Qian Cai, Ram Pai,
Raphael Moreira Zinsly, Ravi Bangoria, Sam Bobroff, Sandipan Das, Segher
Boessenkool, Stephen Rothwell, Sukadev Bhattiprolu, Tyrel Datwyler,
Wolfram Sang, Xiongfeng Wang.
* tag 'powerpc-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (299 commits)
powerpc/pseries: Make vio and ibmebus initcalls pseries specific
cxl: Remove dead Kconfig options
powerpc: Add POWER10 architected mode
powerpc/dt_cpu_ftrs: Add MMA feature
powerpc/dt_cpu_ftrs: Enable Prefixed Instructions
powerpc/dt_cpu_ftrs: Advertise support for ISA v3.1 if selected
powerpc: Add support for ISA v3.1
powerpc: Add new HWCAP bits
powerpc/64s: Don't set FSCR bits in INIT_THREAD
powerpc/64s: Save FSCR to init_task.thread.fscr after feature init
powerpc/64s: Don't let DT CPU features set FSCR_DSCR
powerpc/64s: Don't init FSCR_DSCR in __init_FSCR()
powerpc/32s: Fix another build failure with CONFIG_PPC_KUAP_DEBUG
powerpc/module_64: Use special stub for _mcount() with -mprofile-kernel
powerpc/module_64: Simplify check for -mprofile-kernel ftrace relocations
powerpc/module_64: Consolidate ftrace code
powerpc/32: Disable KASAN with pages bigger than 16k
powerpc/uaccess: Don't set KUEP by default on book3s/32
powerpc/uaccess: Don't set KUAP by default on book3s/32
powerpc/8xx: Reduce time spent in allow_user_access() and friends
...
|
|
Implement primitives necessary for the 4th level folding, add walks of p4d
level where appropriate and replace 5level-fixup.h with pgtable-nop4d.h.
[rppt@linux.ibm.com: powerpc/xmon: drop unused pgdir varialble in show_pte() function]
Link: http://lkml.kernel.org/r/20200519181454.GI1059226@linux.ibm.com
[rppt@linux.ibm.com; build fix]
Link: http://lkml.kernel.org/r/20200423141845.GI13521@linux.ibm.com
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Christophe Leroy <christophe.leroy@c-s.fr> # 8xx and 83xx
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Brian Cain <bcain@codeaurora.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: James Morse <james.morse@arm.com>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Julien Thierry <julien.thierry.kdev@gmail.com>
Cc: Ley Foon Tan <ley.foon.tan@intel.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: http://lkml.kernel.org/r/20200414153455.21744-9-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The code patching code wants to get the value of a struct ppc_inst as
a u64 when the instruction is prefixed, so we can pass the u64 down to
__put_user_asm() and write it with a single store.
The optprobes code wants to load a struct ppc_inst as an immediate
into a register so it is useful to have it as a u64 to use the
existing helper function.
Currently this is a bit awkward because the value differs based on the
CPU endianness, so add a helper to do the conversion.
This fixes the usage in arch_prepare_optimized_kprobe() which was
previously incorrect on big endian.
Fixes: 650b55b707fd ("powerpc: Add prefixed instructions to instruction data type")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Tested-by: Jordan Niethe <jniethe5@gmail.com>
Link: https://lore.kernel.org/r/20200526072630.2487363-1-mpe@ellerman.id.au
|
|
Expand the code-patching self-tests to includes tests for patching
prefixed instructions.
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
[mpe: Use CONFIG_PPC64 not __powerpc64__]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200506034050.24806-25-jniethe5@gmail.com
|
|
For powerpc64, redefine the ppc_inst type so both word and prefixed
instructions can be represented. On powerpc32 the type will remain the
same. Update places which had assumed instructions to be 4 bytes long.
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
Reviewed-by: Alistair Popple <alistair@popple.id.au>
[mpe: Rework the get_user_inst() macros to be parameterised, and don't
assign to the dest if an error occurred. Use CONFIG_PPC64 not
__powerpc64__ in a few places. Address other comments from
Christophe. Fix some sparse complaints.]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200506034050.24806-24-jniethe5@gmail.com
|
|
test_translate_branch() uses two pointers to instructions within a
buffer, p and q, to test patch_branch(). The pointer arithmetic done on
them assumes a size of 4. This will not work if the instruction length
changes. Instead do the arithmetic relative to the void * to the buffer.
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Alistair Popple <alistair@popple.id.au>
Link: https://lore.kernel.org/r/20200506034050.24806-21-jniethe5@gmail.com
|
