summaryrefslogtreecommitdiff
path: root/arch/powerpc/kernel
AgeCommit message (Collapse)AuthorFilesLines
2012-01-10Merge branch 'tty-next' of ↵Linus Torvalds1-0/+3
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty * 'tty-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (65 commits) tty: serial: imx: move del_timer_sync() to avoid potential deadlock imx: add polled io uart methods imx: Add save/restore functions for UART control regs serial/imx: let probing fail for the dt case without a valid alias serial/imx: propagate error from of_alias_get_id instead of using -ENODEV tty: serial: imx: Allow UART to be a source for wakeup serial: driver for m32 arch should not have DEC alpha errata serial/documentation: fix documented name of DCD cpp symbol atmel_serial: fix spinlock lockup in RS485 code tty: Fix memory leak in virtual console when enable unicode translation serial: use DIV_ROUND_CLOSEST instead of open coding it serial: add support for 400 and 800 v3 series Titan cards serial: bfin-uart: Remove ASYNC_CTS_FLOW flag for hardware automatic CTS. serial: bfin-uart: Enable hardware automatic CTS only when CTS pin is available. serial: make FSL errata depend on 8250_CONSOLE, not just 8250 serial: add irq handler for Freescale 16550 errata. serial: manually inline serial8250_handle_port serial: make 8250 timeout use the specified IRQ handler serial: export the key functions for an 8250 IRQ handler serial: clean up parameter passing for 8250 Rx IRQ handling ...
2012-01-09Merge branch 'pm-for-linus' of ↵Linus Torvalds1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm * 'pm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (76 commits) PM / Hibernate: Implement compat_ioctl for /dev/snapshot PM / Freezer: fix return value of freezable_schedule_timeout_killable() PM / shmobile: Allow the A4R domain to be turned off at run time PM / input / touchscreen: Make st1232 use device PM QoS constraints PM / QoS: Introduce dev_pm_qos_add_ancestor_request() PM / shmobile: Remove the stay_on flag from SH7372's PM domains PM / shmobile: Don't include SH7372's INTCS in syscore suspend/resume PM / shmobile: Add support for the sh7372 A4S power domain / sleep mode PM: Drop generic_subsys_pm_ops PM / Sleep: Remove forward-only callbacks from AMBA bus type PM / Sleep: Remove forward-only callbacks from platform bus type PM: Run the driver callback directly if the subsystem one is not there PM / Sleep: Make pm_op() and pm_noirq_op() return callback pointers PM/Devfreq: Add Exynos4-bus device DVFS driver for Exynos4210/4212/4412. PM / Sleep: Merge internal functions in generic_ops.c PM / Sleep: Simplify generic system suspend callbacks PM / Hibernate: Remove deprecated hibernation snapshot ioctls PM / Sleep: Fix freezer failures due to racy usermodehelper_is_disabled() ARM: S3C64XX: Implement basic power domain support PM / shmobile: Use common always on power domain governor ... Fix up trivial conflict in fs/xfs/xfs_buf.c due to removal of unused XBT_FORCE_SLEEP bit
2012-01-09Merge branch 'for-linus2' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs * 'for-linus2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (165 commits) reiserfs: Properly display mount options in /proc/mounts vfs: prevent remount read-only if pending removes vfs: count unlinked inodes vfs: protect remounting superblock read-only vfs: keep list of mounts for each superblock vfs: switch ->show_options() to struct dentry * vfs: switch ->show_path() to struct dentry * vfs: switch ->show_devname() to struct dentry * vfs: switch ->show_stats to struct dentry * switch security_path_chmod() to struct path * vfs: prefer ->dentry->d_sb to ->mnt->mnt_sb vfs: trim includes a bit switch mnt_namespace ->root to struct mount vfs: take /proc/*/mounts and friends to fs/proc_namespace.c vfs: opencode mntget() mnt_set_mountpoint() vfs: spread struct mount - remaining argument of next_mnt() vfs: move fsnotify junk to struct mount vfs: move mnt_devname vfs: move mnt_list to struct mount vfs: switch pnode.h macros to struct mount * ...
2012-01-08Merge branch 'driver-core-next' of ↵Linus Torvalds3-140/+139
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core * 'driver-core-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (73 commits) arm: fix up some samsung merge sysdev conversion problems firmware: Fix an oops on reading fw_priv->fw in sysfs loading file Drivers:hv: Fix a bug in vmbus_driver_unregister() driver core: remove __must_check from device_create_file debugfs: add missing #ifdef HAS_IOMEM arm: time.h: remove device.h #include driver-core: remove sysdev.h usage. clockevents: remove sysdev.h arm: convert sysdev_class to a regular subsystem arm: leds: convert sysdev_class to a regular subsystem kobject: remove kset_find_obj_hinted() m86k: gpio - convert sysdev_class to a regular subsystem mips: txx9_sram - convert sysdev_class to a regular subsystem mips: 7segled - convert sysdev_class to a regular subsystem sh: dma - convert sysdev_class to a regular subsystem sh: intc - convert sysdev_class to a regular subsystem power: suspend - convert sysdev_class to a regular subsystem power: qe_ic - convert sysdev_class to a regular subsystem power: cmm - convert sysdev_class to a regular subsystem s390: time - convert sysdev_class to a regular subsystem ... Fix up conflicts with 'struct sysdev' removal from various platform drivers that got changed: - arch/arm/mach-exynos/cpu.c - arch/arm/mach-exynos/irq-eint.c - arch/arm/mach-s3c64xx/common.c - arch/arm/mach-s3c64xx/cpu.c - arch/arm/mach-s5p64x0/cpu.c - arch/arm/mach-s5pv210/common.c - arch/arm/plat-samsung/include/plat/cpu.h - arch/powerpc/kernel/sysfs.c and fix up cpu_is_hotpluggable() as per Greg in include/linux/cpu.h
2012-01-07Merge branch 'next' of ↵Linus Torvalds26-334/+772
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (185 commits) powerpc: fix compile error with 85xx/p1010rdb.c powerpc: fix compile error with 85xx/p1023_rds.c powerpc/fsl: add MSI support for the Freescale hypervisor arch/powerpc/sysdev/fsl_rmu.c: introduce missing kfree powerpc/fsl: Add support for Integrated Flash Controller powerpc/fsl: update compatiable on fsl 16550 uart nodes powerpc/85xx: fix PCI and localbus properties in p1022ds.dts powerpc/85xx: re-enable ePAPR byte channel driver in corenet32_smp_defconfig powerpc/fsl: Update defconfigs to enable some standard FSL HW features powerpc: Add TBI PHY node to first MDIO bus sbc834x: put full compat string in board match check powerpc/fsl-pci: Allow 64-bit PCIe devices to DMA to any memory address powerpc: Fix unpaired probe_hcall_entry and probe_hcall_exit offb: Fix setting of the pseudo-palette for >8bpp offb: Add palette hack for qemu "standard vga" framebuffer offb: Fix bug in calculating requested vram size powerpc/boot: Change the WARN to INFO for boot wrapper overlap message powerpc/44x: Fix build error on currituck platform powerpc/boot: Change the load address for the wrapper to fit the kernel powerpc/44x: Enable CRASH_DUMP for 440x ... Fix up a trivial conflict in arch/powerpc/include/asm/cputime.h due to the additional sparse-checking code for cputime_t.
2012-01-06Merge branch 'driver-core-next' into Linux 3.2Greg Kroah-Hartman3-137/+136
This resolves the conflict in the arch/arm/mach-s3c64xx/s3c6400.c file, and it fixes the build error in the arch/x86/kernel/microcode_core.c file, that the merge did not catch. The microcode_core.c patch was provided by Stephen Rothwell <sfr@canb.auug.org.au> who was invaluable in the merge issues involved with the large sysdev removal process in the driver-core tree. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-06Merge branch 'core-rcu-for-linus' of ↵Linus Torvalds1-2/+13
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip * 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (64 commits) cpu: Export cpu_up() rcu: Apply ACCESS_ONCE() to rcu_boost() return value Revert "rcu: Permit rt_mutex_unlock() with irqs disabled" docs: Additional LWN links to RCU API rcu: Augment rcu_batch_end tracing for idle and callback state rcu: Add rcutorture tests for srcu_read_lock_raw() rcu: Make rcutorture test for hotpluggability before offlining CPUs driver-core/cpu: Expose hotpluggability to the rest of the kernel rcu: Remove redundant rcu_cpu_stall_suppress declaration rcu: Adaptive dyntick-idle preparation rcu: Keep invoking callbacks if CPU otherwise idle rcu: Irq nesting is always 0 on rcu_enter_idle_common rcu: Don't check irq nesting from rcu idle entry/exit rcu: Permit dyntick-idle with callbacks pending rcu: Document same-context read-side constraints rcu: Identify dyntick-idle CPUs on first force_quiescent_state() pass rcu: Remove dynticks false positives and RCU failures rcu: Reduce latency of rcu_prepare_for_idle() rcu: Eliminate RCU_FAST_NO_HZ grace-period hang rcu: Avoid needlessly IPIing CPUs at GP end ...
2012-01-04switch procfs to umode_t useAl Viro1-1/+1
both proc_dir_entry ->mode and populating functions Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-12-22convert 'memory' sysdev_class to a regular subsystemKay Sievers1-2/+2
This moves the 'memory sysdev_class' over to a regular 'memory' subsystem and converts the devices to regular devices. The sysdev drivers are implemented as subsystem interfaces now. After all sysdev classes are ported to regular driver core entities, the sysdev implementation will be entirely removed from the kernel. Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-22cpu: convert 'cpu' and 'machinecheck' sysdev_class to a regular subsystemKay Sievers3-135/+134
This moves the 'cpu sysdev_class' over to a regular 'cpu' subsystem and converts the devices to regular devices. The sysdev drivers are implemented as subsystem interfaces now. After all sysdev classes are ported to regular driver core entities, the sysdev implementation will be entirely removed from the kernel. Userspace relies on events and generic sysfs subsystem infrastructure from sysdev devices, which are made available with this conversion. Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no> Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Borislav Petkov <bp@amd64.org> Cc: Tigran Aivazian <tigran@aivazian.fsnet.co.uk> Cc: Len Brown <lenb@kernel.org> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Dave Jones <davej@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: "Srivatsa S. Bhat" <srivatsa.bhat@linux.vnet.ibm.com> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-22PM: Drop generic_subsys_pm_opsRafael J. Wysocki1-1/+0
Since the PM core is now going to execute driver callbacks directly if the corresponding subsystem callbacks are not present, forward-only subsystem callbacks (i.e. such that only execute the corresponding driver callbacks) are not necessary any more. Thus it is possible to remove generic_subsys_pm_ops, because the only callback in there that is not forward-only, .runtime_idle, is not really used by the only user of generic_subsys_pm_ops, which is vio_bus_type. However, the generic callback routines themselves cannot be removed from generic_ops.c, because they are used individually by a number of subsystems. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-12-20powerpc/44x: Enable CONFIG_RELOCATABLE for PPC44xSuzuki Poulose1-2/+93
The following patch adds relocatable kernel support - based on processing of dynamic relocations - for PPC44x kernel. We find the runtime address of _stext and relocate ourselves based on the following calculation. virtual_base = ALIGN(KERNELBASE,256M) + MODULO(_stext.run,256M) relocate() is called with the Effective Virtual Base Address (as shown below) | Phys. Addr| Virt. Addr | Page (256M) |------------------------| Boundary | | | | | | | | | Kernel Load |___________|_ __ _ _ _ _|<- Effective Addr(_stext)| | ^ |Virt. Base Addr | | | | | | | | | |reloc_offset| | | | | | | | | | |______v_____|<-(KERNELBASE)%256M | | | | | | | | | Page(256M) |-----------|------------| Boundary | | | The virt_phys_offset is updated accordingly, i.e, virt_phys_offset = effective. kernel virt base - kernstart_addr I have tested the patches on 440x platforms only. However this should work fine for PPC_47x also, as we only depend on the runtime address and the current TLB XLAT entry for the startup code, which is available in r25. I don't have access to a 47x board yet. So, it would be great if somebody could test this on 47x. Signed-off-by: Suzuki K. Poulose <suzuki@in.ibm.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Kumar Gala <galak@kernel.crashing.org> Cc: Tony Breeds <tony@bakeyournoodle.com> Cc: Josh Boyer <jwboyer@gmail.com> Cc: linuxppc-dev <linuxppc-dev@lists.ozlabs.org> Signed-off-by: Josh Boyer <jwboyer@gmail.com>
2011-12-20powerpc: Process dynamic relocations for kernelSuzuki Poulose3-1/+217
The following patch implements the dynamic relocation processing for PPC32 kernel. relocate() accepts the target virtual address and relocates the kernel image to the same. Currently the following relocation types are handled : R_PPC_RELATIVE R_PPC_ADDR16_LO R_PPC_ADDR16_HI R_PPC_ADDR16_HA The last 3 relocations in the above list depends on value of Symbol indexed whose index is encoded in the Relocation entry. Hence we need the Symbol Table for processing such relocations. Note: The GNU ld for ppc32 produces buggy relocations for relocation types that depend on symbols. The value of the symbols with STB_LOCAL scope should be assumed to be zero. - Alan Modra Signed-off-by: Suzuki K. Poulose <suzuki@in.ibm.com> Signed-off-by: Josh Poimboeuf <jpoimboe@linux.vnet.ibm.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Alan Modra <amodra@au1.ibm.com> Cc: Kumar Gala <galak@kernel.crashing.org> Cc: linuxppc-dev <linuxppc-dev@lists.ozlabs.org> Signed-off-by: Josh Boyer <jwboyer@gmail.com>
2011-12-20powerpc/44x: Enable DYNAMIC_MEMSTART for 440xSuzuki Poulose1-0/+12
DYNAMIC_MEMSTART(old RELOCATABLE) was restricted only to PPC_47x variants of 44x. This patch enables DYNAMIC_MEMSTART for 440x based chipsets. Signed-off-by: Suzuki K. Poulose <suzuki@in.ibm.com> Cc: Josh Boyer <jwboyer@gmail.com> Cc: Kumar Gala <galak@kernel.crashing.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: linux ppc dev <linuxppc-dev@lists.ozlabs.org> Signed-off-by: Josh Boyer <jwboyer@gmail.com>
2011-12-20powerpc: Rename mapping based RELOCATABLE to DYNAMIC_MEMSTART for BookESuzuki Poulose5-6/+8
The current implementation of CONFIG_RELOCATABLE in BookE is based on mapping the page aligned kernel load address to KERNELBASE. This approach however is not enough for platforms, where the TLB page size is large (e.g, 256M on 44x). So we are renaming the RELOCATABLE used currently in BookE to DYNAMIC_MEMSTART to reflect the actual method. The CONFIG_RELOCATABLE for PPC32(BookE) based on processing of the dynamic relocations will be introduced in the later in the patch series. This change would allow the use of the old method of RELOCATABLE for platforms which can afford to enforce the page alignment (platforms with smaller TLB size). Changes since v3: * Introduced a new config, NONSTATIC_KERNEL, to denote a kernel which is either a RELOCATABLE or DYNAMIC_MEMSTART(Suggested by: Josh Boyer) Suggested-by: Scott Wood <scottwood@freescale.com> Tested-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Suzuki K. Poulose <suzuki@in.ibm.com> Cc: Scott Wood <scottwood@freescale.com> Cc: Kumar Gala <galak@kernel.crashing.org> Cc: Josh Boyer <jwboyer@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: linux ppc dev <linuxppc-dev@lists.ozlabs.org> Signed-off-by: Josh Boyer <jwboyer@gmail.com>
2011-12-19powerpc: Fix old bug in prom_init setting of the colorBenjamin Herrenschmidt1-1/+1
We have an array of 16 entries and a loop of 32 iterations... oops. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-12-19powerpc: Only use initrd_end as the limit for alloc_bottom if it's inside ↵Paul Mackerras1-8/+9
the RMO. As the kernels and initrd's get bigger boot-loaders and possibly kexec-tools will need to place the initrd outside the RMO. When this happens we end up with no lowmem and the boot doesn't get very far. Only use initrd_end as the limit for alloc_bottom if it's inside the RMO. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Tony Breeds <tony@bakeyournoodle.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-12-19powerpc: Fix wrong divisor in usecs_to_cputimeAndreas Schwab1-5/+5
Commit d57af9b (taskstats: use real microsecond granularity for CPU times) renamed msecs_to_cputime to usecs_to_cputime, but failed to update all numbers on the way. This causes nonsensical cpu idle/iowait values to be displayed in /proc/stat (the only user of usecs_to_cputime so far). This also renames __cputime_msec_factor to __cputime_usec_factor, adapting its value and using it directly in cputime_to_usecs instead of doing two multiplications. Signed-off-by: Andreas Schwab <schwab@linux-m68k.org> Acked-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-12-16Merge remote-tracking branch 'jwb/next' into nextBenjamin Herrenschmidt2-0/+29
Conflicts: arch/powerpc/platforms/40x/ppc40x_simple.c
2011-12-16Merge branch 'kexec' into nextBenjamin Herrenschmidt2-189/+204
2011-12-16Merge branch 'ps3' into nextBenjamin Herrenschmidt1-2/+2
2011-12-16Merge branch 'cpuidle' into nextBenjamin Herrenschmidt2-0/+29
2011-12-11nohz: Remove tick_nohz_idle_enter_norcu() / tick_nohz_idle_exit_norcu()Frederic Weisbecker1-8/+7
Those two APIs were provided to optimize the calls of tick_nohz_idle_enter() and rcu_idle_enter() into a single irq disabled section. This way no interrupt happening in-between would needlessly process any RCU job. Now we are talking about an optimization for which benefits have yet to be measured. Let's start simple and completely decouple idle rcu and dyntick idle logics to simplify. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Reviewed-by: Josh Triplett <josh@joshtriplett.org> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2011-12-11powerpc: Tell RCU about idle after hcall tracingPaul E. McKenney1-2/+14
The PowerPC pSeries platform (CONFIG_PPC_PSERIES=y) enables hypervisor-call tracing for CONFIG_TRACEPOINTS=y kernels. One of the hypervisor calls that is traced is the H_CEDE call in the idle loop that tells the hypervisor that this OS instance no longer needs the current CPU. However, tracing uses RCU, so this combination of kernel configuration variables needs to avoid telling RCU about the current CPU's idleness until after the H_CEDE-entry tracing completes on the one hand, and must tell RCU that the the current CPU is no longer idle before the H_CEDE-exit tracing starts. In all other cases, it suffices to inform RCU of CPU idleness upon idle-loop entry and exit. This commit makes the required adjustments. Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2011-12-11nohz: Allow rcu extended quiescent state handling seperately from tick stopFrederic Weisbecker1-2/+2
It is assumed that rcu won't be used once we switch to tickless mode and until we restart the tick. However this is not always true, as in x86-64 where we dereference the idle notifiers after the tick is stopped. To prepare for fixing this, add two new APIs: tick_nohz_idle_enter_norcu() and tick_nohz_idle_exit_norcu(). If no use of RCU is made in the idle loop between tick_nohz_enter_idle() and tick_nohz_exit_idle() calls, the arch must instead call the new *_norcu() version such that the arch doesn't need to call rcu_idle_enter() and rcu_idle_exit(). Otherwise the arch must call tick_nohz_enter_idle() and tick_nohz_exit_idle() and also call explicitly: - rcu_idle_enter() after its last use of RCU before the CPU is put to sleep. - rcu_idle_exit() before the first use of RCU after the CPU is woken up. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Mike Frysinger <vapier@gentoo.org> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Cc: David Miller <davem@davemloft.net> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Paul Mackerras <paulus@samba.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2011-12-11nohz: Separate out irq exit and idle loop dyntick logicFrederic Weisbecker1-2/+2
The tick_nohz_stop_sched_tick() function, which tries to delay the next timer tick as long as possible, can be called from two places: - From the idle loop to start the dytick idle mode - From interrupt exit if we have interrupted the dyntick idle mode, so that we reprogram the next tick event in case the irq changed some internal state that requires this action. There are only few minor differences between both that are handled by that function, driven by the ts->inidle cpu variable and the inidle parameter. The whole guarantees that we only update the dyntick mode on irq exit if we actually interrupted the dyntick idle mode, and that we enter in RCU extended quiescent state from idle loop entry only. Split this function into: - tick_nohz_idle_enter(), which sets ts->inidle to 1, enters dynticks idle mode unconditionally if it can, and enters into RCU extended quiescent state. - tick_nohz_irq_exit() which only updates the dynticks idle mode when ts->inidle is set (ie: if tick_nohz_idle_enter() has been called). To maintain symmetry, tick_nohz_restart_sched_tick() has been renamed into tick_nohz_idle_exit(). This simplifies the code and micro-optimize the irq exit path (no need for local_irq_save there). This also prepares for the split between dynticks and rcu extended quiescent state logics. We'll need this split to further fix illegal uses of RCU in extended quiescent states in the idle loop. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Mike Frysinger <vapier@gentoo.org> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Cc: David Miller <davem@davemloft.net> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Paul Mackerras <paulus@samba.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2011-12-10serial: add irq handler for Freescale 16550 errata.Paul Gortmaker1-0/+3
Sending a break on the SOC UARTs found in some MPC83xx/85xx/86xx chips seems to cause a short lived IRQ storm (/proc/interrupts typically shows somewhere between 300 and 1500 events). Unfortunately this renders SysRQ over the serial console completely inoperable. The suggested workaround in the errata is to read the Rx register, wait one character period, and then read the Rx register again. We achieve this by tracking the old LSR value, and on the subsequent interrupt event after a break, we don't read LSR, instead we just read the RBR again and return immediately. The "fsl,ns16550" is used in the compatible field of the serial device to mark UARTs known to have this issue. Thanks to Scott Wood for providing the errata data which led to a much cleaner fix. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-09powerpc/476fpe: Add 476fpe SoC codeTony Breeds2-0/+16
Based on original work by David 'Shaggy' Kleikamp. Signed-off-by: Tony Breeds <tony@bakeyournoodle.com> Signed-off-by: Josh Boyer <jwboyer@gmail.com>
2011-12-08memblock: s/memblock_analyze()/memblock_allow_resize()/ and update usersTejun Heo2-5/+1
The only function of memblock_analyze() is now allowing resize of memblock region arrays. Rename it to memblock_allow_resize() and update its users. * The following users remain the same other than renaming. arm/mm/init.c::arm_memblock_init() microblaze/kernel/prom.c::early_init_devtree() powerpc/kernel/prom.c::early_init_devtree() openrisc/kernel/prom.c::early_init_devtree() sh/mm/init.c::paging_init() sparc/mm/init_64.c::paging_init() unicore32/mm/init.c::uc32_memblock_init() * In the following users, analyze was used to update total size which is no longer necessary. powerpc/kernel/machine_kexec.c::reserve_crashkernel() powerpc/kernel/prom.c::early_init_devtree() powerpc/mm/init_32.c::MMU_init() powerpc/mm/tlb_nohash.c::__early_init_mmu() powerpc/platforms/ps3/mm.c::ps3_mm_add_memory() powerpc/platforms/embedded6xx/wii.c::wii_memory_fixups() sh/kernel/machine_kexec.c::reserve_crashkernel() * x86/kernel/e820.c::memblock_x86_fill() was directly setting memblock_can_resize before populating memblock and calling analyze afterwards. Call memblock_allow_resize() before start populating. memblock_can_resize is now static inside memblock.c. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Russell King <linux@arm.linux.org.uk> Cc: Michal Simek <monstr@monstr.eu> Cc: Paul Mundt <lethal@linux-sh.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Cc: "H. Peter Anvin" <hpa@zytor.com>
2011-12-08powerpc: Cleanup memblock usageTejun Heo1-11/+6
* early_init_devtree(): Total memory size is aligned to PAGE_SIZE; however, alignment isn't enforced if memory_limit is explicitly specified. Simplify the logic and always apply PAGE_SIZE alignment. * MMU_init(): memblock regions is truncated by directly modifying memblock.memory.cnt. This is incomplete (reserved array is not truncated) and unnecessarily low level hindering further memblock improvments. Use memblock_enforce_memory_limit() instead. * wii_memory_fixups(): Unnecessarily low level direct manipulation of memblock regions. The same result can be achieved using properly abstracted operations. Reimplement using memblock API. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Yinghai Lu <yinghai@kernel.org>
2011-12-08memblock: Kill memblock_init()Tejun Heo1-2/+0
memblock_init() initializes arrays for regions and memblock itself; however, all these can be done with struct initializers and memblock_init() can be removed. This patch kills memblock_init() and initializes memblock with struct initializer. The only difference is that the first dummy entries don't have .nid set to MAX_NUMNODES initially. This doesn't cause any behavior difference. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Russell King <linux@arm.linux.org.uk> Cc: Michal Simek <monstr@monstr.eu> Cc: Paul Mundt <lethal@linux-sh.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Cc: "H. Peter Anvin" <hpa@zytor.com>
2011-12-08powerpc: Provide a way for KVM to indicate that NV GPR values are lostPaul Mackerras2-0/+5
This fixes a problem where a CPU thread coming out of nap mode can think it has valid values in the nonvolatile GPRs (r14 - r31) as saved away in power7_idle, but in fact the values have been trashed because the thread was used for KVM in the mean time. The result is that the thread crashes because code that called power7_idle (e.g., pnv_smp_cpu_kill_self()) goes to use values in registers that have been trashed. The bit field in SRR1 that tells whether state was lost only reflects the most recent nap, which may not have been the nap instruction in power7_idle. So we need an extra PACA field to indicate that state has been lost even if SRR1 indicates that the most recent nap didn't lose state. We clear this field when saving the state in power7_idle, we set it to a non-zero value when we use the thread for KVM, and we test it in power7_wakeup_noloss. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-12-08powerpc/powernv: Fix problems in onlining CPUsPaul Mackerras1-1/+1
At present, on the powernv platform, if you off-line a CPU that was online, and then try to on-line it again, the kernel generates a warning message "OPAL Error -1 starting CPU n". Furthermore, if the CPU is a secondary thread that was used by KVM while it was off-line, the CPU fails to come online. The first problem is fixed by only calling OPAL to start the CPU the first time it is on-lined, as indicated by the cpu_start field of its PACA being zero. The second problem is fixed by restoring the cpu_start field to 1 instead of 0 when using the CPU within KVM. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-12-08powerpc/pseries: Increase minimum RMO size from 64MB to 256MBAnton Blanchard1-1/+1
The minimum RMO size field in ibm,client-architecture is currently ignored, but a future firmware version will rectify that. Since we always get at least 128MB of RMO right now, asking for 64MB is likely to result in boot failures. We should bump it to at least 128MB, but considering all the boot issues we have on 128MB RMO boxes and all new machines have virtual RMO, we may as well set our minimum to 256MB. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-12-08powerpc/ps3: Fix hcall lv1_get_version_infoGeoff Levand1-2/+2
The lv1_get_version_info hcall takes 2, not 1 output arguments. Adjust the lv1 hcall table and all calls. Usage: int lv1_get_version_info(u64 *version_number, u64 *vendor_id) Signed-off-by: Geoff Levand <geoff@infradead.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-12-08powerpc/kdump: Only save CPU state first time through the secondary CPU ↵Anton Blanchard1-12/+21
capture code We might enter the secondary CPU capture code twice, eg if we have to unstick some CPUs with a system reset. In this case we don't want to overwrite the state on CPUs that had made it into the capture code OK, so use the cpus_state_saved cpumask for that and make it local to crash_ipi_callback. For controlling progress now use atomic_t cpus_in_crash to count how many CPUs have made it into the kdump code, and time_to_dump to tell everyone it's time to dump. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-12-08powerpc/kdump: Delay before sending IPI on a system resetAnton Blanchard1-7/+26
If we enter the kdump code via system reset, wait a bit before sending the IPI to capture all secondary CPUs. Without it we race with the hypervisor that is issuing the system reset to each CPU. If the IPI gets there first the system reset oops output then shows the register state of the IPI handler which is not what we want. I took the opportunity to add defines for all the various delays we have. There's no need for cpu_relax when we are doing an mdelay, so remove them too. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-12-08powerpc: Rework die()Anton Blanchard1-55/+73
Our die() code was based off a very old x86 version. Update it to mirror the current x86 code. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-12-08powerpc: Cleanup crash/kexec codeAnton Blanchard1-18/+3
Remove some unnecessary defines and fix some spelling mistakes. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-12-08powerpc/kdump: Use setjmp/longjmp to handle kdump and system reset recursionAnton Blanchard1-15/+57
We can handle recursion caused by system reset by reusing the crash shutdown fault handler. Since we don't have an OS triggerable NMI, if all CPUs don't make it into kdump then we tell the user to issue a system reset. However if we have a panic timeout set we cannot wait forever and must continue the kdump. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-12-08powerpc: Remove broken and complicated kdump system reset codeAnton Blanchard2-95/+25
We have a lot of complicated logic that handles possible recursion between kdump and a system reset exception. We can solve this in a much simpler way using the same setjmp/longjmp tricks xmon does. As a first step, this patch removes the old system reset code. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-12-08powerpc: Give us time to get all oopses out before panickingAnton Blanchard1-1/+13
I've been seeing truncated output when people send system reset info to me. We should see a backtrace for every CPU, but the panic() code takes the box down before they all make it out to the console. The panic code runs unlocked so we also see corrupted console output. If we are going to panic, then delay 1 second before calling into the panic code. Move oops_exit inside the die lock and put a newline between oopses for clarity. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-12-08powerpc/cpuidle: cpuidle driver for pSeriesDeepthi Dharwar1-0/+2
This patch implements a back-end cpuidle driver for pSeries based on pseries_dedicated_idle_loop and pseries_shared_idle_loop routines. The driver is built only if CONFIG_CPU_IDLE is set. This cpuidle driver uses global registration of idle states and not per-cpu. Signed-off-by: Deepthi Dharwar <deepthi@linux.vnet.ibm.com> Signed-off-by: Trinabh Gupta <g.trinabh@gmail.com> Signed-off-by: Arun R Bharadwaj <arun.r.bharadwaj@gmail.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-12-08powerpc/cpuidle: Add cpu_idle_wait() to allow switching of idle routinesDeepthi Dharwar1-0/+27
This patch provides cpu_idle_wait() routine for the powerpc platform which is required by the cpuidle subsystem. This routine is required to change the idle handler on SMP systems. The equivalent routine for x86 is in arch/x86/kernel/process.c but the powerpc implementation is different. cpuidle_disable variable is to enable/disable cpuidle framework if power_save option is set during the boot time. Signed-off-by: Deepthi Dharwar <deepthi@linux.vnet.ibm.com> Signed-off-by: Trinabh Gupta <g.trinabh@gmail.com> Signed-off-by: Arun R Bharadwaj <arun.r.bharadwaj@gmail.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-12-08Merge branch 'booke-hugetlb' into nextBenjamin Herrenschmidt1-0/+10
2011-12-07powerpc/pci: Make pci_read_irq_line() staticBenjamin Herrenschmidt1-2/+1
It's only used inside the same file where it's defined. There's also no point exporting it anymore. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-12-07powerpc/powernv: Workaround OFW issues in prom_init.cBenjamin Herrenschmidt1-4/+10
Open Firmware on OPAL machines seems to have issues if we close stdin and/or we try to print things after calling "quiesce" so we avoid doing both. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-12-07powerpc: Add gpages reservation code for 64-bit FSL BOOKEBecky Bruce1-0/+10
For 64-bit FSL_BOOKE implementations, gigantic pages need to be reserved at boot time by the memblock code based on the command line. This adds the call that handles the reservation, and fixes some code comments. It also removes the previous pr_err when reserve_hugetlb_gpages is called on a system without hugetlb enabled - the way the code is structured, the call is unconditional and the resulting error message spurious and confusing. Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-11-30powerpc/40x: Add APM8018X SOC supportTanmay Inamdar1-0/+13
The AppliedMicro APM8018X embedded processor targets embedded applications that require low power and a small footprint. It features a PowerPC 405 processor core built in a 65nm low-power CMOS process with a five-stage pipeline executing up to one instruction per cycle. The family has 128-kbytes of on-chip memory, a 128-bit local bus and on-chip DDR2 SDRAM controller with 16-bit interface. Signed-off-by: Tanmay Inamdar <tinamdar@apm.com> Signed-off-by: Josh Boyer <jwboyer@gmail.com>
2011-11-28powerpc: Decode correct MSR bits in oops outputAnton Blanchard1-3/+19
On a 64bit book3s machine I have an oops from a system reset that claims the book3e CE bit was set: MSR: 8000000000021032 <ME,CE,IR,DR> CR: 24004082 XER: 00000010 On a book3s machine system reset sets IBM bit 46 and 47 depending on the power saving mode. Separate the definitions by type and for completeness add the rest of the bits in. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-03-09 21:54:47 +0300