summaryrefslogtreecommitdiff
path: root/arch/parisc/Kconfig
AgeCommit message (Collapse)AuthorFilesLines
2016-05-22parisc: Add native high-resolution sched_clock() implementationHelge Deller1-0/+1
Add a native implementation for the sched_clock() function which utilizes the processor-internal cycle counter (Control Register 16) as high-resolution time source. With this patch we now get much more fine-grained resolutions in various in-kernel time measurements (e.g. when viewing the function tracing logs), and probably a more accurate scheduling on SMP systems. There are a few specific implementation details in this patch: 1. On a 32bit kernel we emulate the higher 32bits of the required 64-bit resolution of sched_clock() by increasing a per-cpu counter at every wrap-around of the 32bit cycle counter. 2. In a SMP system, the cycle counters of the various CPUs are not syncronized (similiar to the TSC in a x86_64 system). To cope with this we define HAVE_UNSTABLE_SCHED_CLOCK and let the upper layers do the adjustment work. 3. Since we need HAVE_UNSTABLE_SCHED_CLOCK, we need to provide a cmpxchg64() function even on a 32-bit kernel. 4. A 64-bit SMP kernel which is started on a UP system will mark the sched_clock() implementation as "stable", which means that we don't expect any jumps in the returned counter. This is true because we then run only on one CPU. Signed-off-by: Helge Deller <deller@gmx.de>
2016-05-22parisc: Add ARCH_TRACEHOOK and regset supportHelge Deller1-0/+1
By adding TRACEHOOK support we now get a clean user interface to access registers via PTRACE_GETREGS, PTRACE_SETREGS, PTRACE_GETFPREGS and PTRACE_SETFPREGS. The user-visible regset struct user_regs_struct and user_fp_struct are modelled similiar to x86 and can be accessed via PTRACE_GETREGSET. Signed-off-by: Helge Deller <deller@gmx.de>
2016-05-22parisc: Add syscall tracepoint supportHelge Deller1-0/+1
This patch adds support for the TIF_SYSCALL_TRACEPOINT on the parisc architecture. Basically, it calls the appropriate tracepoints on syscall entry and exit. Signed-off-by: Helge Deller <deller@gmx.de>
2016-05-21lib/GCD.c: use binary GCD algorithm instead of EuclideanZhaoxiu Zeng1-0/+1
The binary GCD algorithm is based on the following facts: 1. If a and b are all evens, then gcd(a,b) = 2 * gcd(a/2, b/2) 2. If a is even and b is odd, then gcd(a,b) = gcd(a/2, b) 3. If a and b are all odds, then gcd(a,b) = gcd((a-b)/2, b) = gcd((a+b)/2, b) Even on x86 machines with reasonable division hardware, the binary algorithm runs about 25% faster (80% the execution time) than the division-based Euclidian algorithm. On platforms like Alpha and ARMv6 where division is a function call to emulation code, it's even more significant. There are two variants of the code here, depending on whether a fast __ffs (find least significant set bit) instruction is available. This allows the unpredictable branches in the bit-at-a-time shifting loop to be eliminated. If fast __ffs is not available, the "even/odd" GCD variant is used. I use the following code to benchmark: #include <stdio.h> #include <stdlib.h> #include <stdint.h> #include <string.h> #include <time.h> #include <unistd.h> #define swap(a, b) \ do { \ a ^= b; \ b ^= a; \ a ^= b; \ } while (0) unsigned long gcd0(unsigned long a, unsigned long b) { unsigned long r; if (a < b) { swap(a, b); } if (b == 0) return a; while ((r = a % b) != 0) { a = b; b = r; } return b; } unsigned long gcd1(unsigned long a, unsigned long b) { unsigned long r = a | b; if (!a || !b) return r; b >>= __builtin_ctzl(b); for (;;) { a >>= __builtin_ctzl(a); if (a == b) return a << __builtin_ctzl(r); if (a < b) swap(a, b); a -= b; } } unsigned long gcd2(unsigned long a, unsigned long b) { unsigned long r = a | b; if (!a || !b) return r; r &= -r; while (!(b & r)) b >>= 1; for (;;) { while (!(a & r)) a >>= 1; if (a == b) return a; if (a < b) swap(a, b); a -= b; a >>= 1; if (a & r) a += b; a >>= 1; } } unsigned long gcd3(unsigned long a, unsigned long b) { unsigned long r = a | b; if (!a || !b) return r; b >>= __builtin_ctzl(b); if (b == 1) return r & -r; for (;;) { a >>= __builtin_ctzl(a); if (a == 1) return r & -r; if (a == b) return a << __builtin_ctzl(r); if (a < b) swap(a, b); a -= b; } } unsigned long gcd4(unsigned long a, unsigned long b) { unsigned long r = a | b; if (!a || !b) return r; r &= -r; while (!(b & r)) b >>= 1; if (b == r) return r; for (;;) { while (!(a & r)) a >>= 1; if (a == r) return r; if (a == b) return a; if (a < b) swap(a, b); a -= b; a >>= 1; if (a & r) a += b; a >>= 1; } } static unsigned long (*gcd_func[])(unsigned long a, unsigned long b) = { gcd0, gcd1, gcd2, gcd3, gcd4, }; #define TEST_ENTRIES (sizeof(gcd_func) / sizeof(gcd_func[0])) #if defined(__x86_64__) #define rdtscll(val) do { \ unsigned long __a,__d; \ __asm__ __volatile__("rdtsc" : "=a" (__a), "=d" (__d)); \ (val) = ((unsigned long long)__a) | (((unsigned long long)__d)<<32); \ } while(0) static unsigned long long benchmark_gcd_func(unsigned long (*gcd)(unsigned long, unsigned long), unsigned long a, unsigned long b, unsigned long *res) { unsigned long long start, end; unsigned long long ret; unsigned long gcd_res; rdtscll(start); gcd_res = gcd(a, b); rdtscll(end); if (end >= start) ret = end - start; else ret = ~0ULL - start + 1 + end; *res = gcd_res; return ret; } #else static inline struct timespec read_time(void) { struct timespec time; clock_gettime(CLOCK_PROCESS_CPUTIME_ID, &time); return time; } static inline unsigned long long diff_time(struct timespec start, struct timespec end) { struct timespec temp; if ((end.tv_nsec - start.tv_nsec) < 0) { temp.tv_sec = end.tv_sec - start.tv_sec - 1; temp.tv_nsec = 1000000000ULL + end.tv_nsec - start.tv_nsec; } else { temp.tv_sec = end.tv_sec - start.tv_sec; temp.tv_nsec = end.tv_nsec - start.tv_nsec; } return temp.tv_sec * 1000000000ULL + temp.tv_nsec; } static unsigned long long benchmark_gcd_func(unsigned long (*gcd)(unsigned long, unsigned long), unsigned long a, unsigned long b, unsigned long *res) { struct timespec start, end; unsigned long gcd_res; start = read_time(); gcd_res = gcd(a, b); end = read_time(); *res = gcd_res; return diff_time(start, end); } #endif static inline unsigned long get_rand() { if (sizeof(long) == 8) return (unsigned long)rand() << 32 | rand(); else return rand(); } int main(int argc, char **argv) { unsigned int seed = time(0); int loops = 100; int repeats = 1000; unsigned long (*res)[TEST_ENTRIES]; unsigned long long elapsed[TEST_ENTRIES]; int i, j, k; for (;;) { int opt = getopt(argc, argv, "n:r:s:"); /* End condition always first */ if (opt == -1) break; switch (opt) { case 'n': loops = atoi(optarg); break; case 'r': repeats = atoi(optarg); break; case 's': seed = strtoul(optarg, NULL, 10); break; default: /* You won't actually get here. */ break; } } res = malloc(sizeof(unsigned long) * TEST_ENTRIES * loops); memset(elapsed, 0, sizeof(elapsed)); srand(seed); for (j = 0; j < loops; j++) { unsigned long a = get_rand(); /* Do we have args? */ unsigned long b = argc > optind ? strtoul(argv[optind], NULL, 10) : get_rand(); unsigned long long min_elapsed[TEST_ENTRIES]; for (k = 0; k < repeats; k++) { for (i = 0; i < TEST_ENTRIES; i++) { unsigned long long tmp = benchmark_gcd_func(gcd_func[i], a, b, &res[j][i]); if (k == 0 || min_elapsed[i] > tmp) min_elapsed[i] = tmp; } } for (i = 0; i < TEST_ENTRIES; i++) elapsed[i] += min_elapsed[i]; } for (i = 0; i < TEST_ENTRIES; i++) printf("gcd%d: elapsed %llu\n", i, elapsed[i]); k = 0; srand(seed); for (j = 0; j < loops; j++) { unsigned long a = get_rand(); unsigned long b = argc > optind ? strtoul(argv[optind], NULL, 10) : get_rand(); for (i = 1; i < TEST_ENTRIES; i++) { if (res[j][i] != res[j][0]) break; } if (i < TEST_ENTRIES) { if (k == 0) { k = 1; fprintf(stderr, "Error:\n"); } fprintf(stderr, "gcd(%lu, %lu): ", a, b); for (i = 0; i < TEST_ENTRIES; i++) fprintf(stderr, "%ld%s", res[j][i], i < TEST_ENTRIES - 1 ? ", " : "\n"); } } if (k == 0) fprintf(stderr, "PASS\n"); free(res); return 0; } Compiled with "-O2", on "VirtualBox 4.4.0-22-generic #38-Ubuntu x86_64" got: zhaoxiuzeng@zhaoxiuzeng-VirtualBox:~/develop$ ./gcd -r 500000 -n 10 gcd0: elapsed 10174 gcd1: elapsed 2120 gcd2: elapsed 2902 gcd3: elapsed 2039 gcd4: elapsed 2812 PASS zhaoxiuzeng@zhaoxiuzeng-VirtualBox:~/develop$ ./gcd -r 500000 -n 10 gcd0: elapsed 9309 gcd1: elapsed 2280 gcd2: elapsed 2822 gcd3: elapsed 2217 gcd4: elapsed 2710 PASS zhaoxiuzeng@zhaoxiuzeng-VirtualBox:~/develop$ ./gcd -r 500000 -n 10 gcd0: elapsed 9589 gcd1: elapsed 2098 gcd2: elapsed 2815 gcd3: elapsed 2030 gcd4: elapsed 2718 PASS zhaoxiuzeng@zhaoxiuzeng-VirtualBox:~/develop$ ./gcd -r 500000 -n 10 gcd0: elapsed 9914 gcd1: elapsed 2309 gcd2: elapsed 2779 gcd3: elapsed 2228 gcd4: elapsed 2709 PASS [akpm@linux-foundation.org: avoid #defining a CONFIG_ variable] Signed-off-by: Zhaoxiu Zeng <zhaoxiu.zeng@gmail.com> Signed-off-by: George Spelvin <linux@horizon.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-16Merge branch 'parisc-4.6-4' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc ftrace fixes from Helge Deller: "This is (most likely) the last pull request for v4.6 for the parisc architecture. It fixes the FTRACE feature for parisc, which is horribly broken since quite some time and doesn't even compile. This patch just fixes the bare minimum (it actually removes more lines than it adds), so that the function tracer works again on 32- and 64bit kernels. I've queued up additional patches on top of this patch which e.g. add the syscall tracer, but those have to wait for the merge window for v4.7." * 'parisc-4.6-4' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Fix ftrace function tracer
2016-04-14parisc: Fix ftrace function tracerHelge Deller1-2/+2
Fix the FTRACE function tracer for 32- and 64-bit kernel. The former code was horribly broken. Reimplement most coding in assembly and utilize optimizations, e.g. put mcount() and ftrace_stub() into one L1 cacheline. Signed-off-by: Helge Deller <deller@gmx.de>
2016-03-31Merge branch 'parisc-4.6-2' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc fixes from Helge Deller: "Fix seccomp filter support and SIGSYS signals on compat kernel. Both patches are tagged for v4.5 stable kernel" * 'parisc-4.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Fix and enable seccomp filter support parisc: Fix SIGSYS signals in compat case
2016-03-31parisc: Fix and enable seccomp filter supportHelge Deller1-0/+1
The seccomp filter support requires careful handling of task registers. This includes reloading of the return value (%r28) and proper syscall exit if secure_computing() returned -1. Additionally we need to sign-extend the syscall number from signed 32bit to signed 64bit in do_syscall_trace_enter() since the ptrace interface only allows storing 32bit values in compat mode. Signed-off-by: Helge Deller <deller@gmx.de> Cc: stable@vger.kernel.org # v4.5
2016-03-23parisc: Use generic extable search and sort routinesHelge Deller1-0/+1
Switch to the generic extable search and sort routines which were introduced with commit a272858 from Ard Biesheuvel. This saves quite some memory in the vmlinux binary with the 64bit kernel. Signed-off-by: Helge Deller <deller@gmx.de>
2016-01-21dma-mapping: always provide the dma_map_ops based implementationChristoph Hellwig1-1/+0
Move the generic implementation to <linux/dma-mapping.h> now that all architectures support it and remove the HAVE_DMA_ATTR Kconfig symbol now that everyone supports them. [valentinrothberg@gmail.com: remove leftovers in Kconfig] Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Aurelien Jacquiot <a-jacquiot@ti.com> Cc: Chris Metcalf <cmetcalf@ezchip.com> Cc: David Howells <dhowells@redhat.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no> Cc: Helge Deller <deller@gmx.de> Cc: James Hogan <james.hogan@imgtec.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com> Cc: Ley Foon Tan <lftan@altera.com> Cc: Mark Salter <msalter@redhat.com> Cc: Mikael Starvik <starvik@axis.com> Cc: Steven Miao <realmz6@gmail.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Joerg Roedel <jroedel@suse.de> Cc: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Valentin Rothberg <valentinrothberg@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-21parisc: convert to dma_map_opsChristoph Hellwig1-0/+2
Signed-off-by: Christoph Hellwig <hch@lst.de> Tested-by: Helge Deller <deller@gmx.de> Acked-by: Helge Deller <deller@gmx.de> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Joerg Roedel <jroedel@suse.de> Cc: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-16Kconfig: remove HAVE_LATENCYTOP_SUPPORTWill Deacon1-3/+0
As illustrated by commit a3afe70b83fd ("[S390] latencytop s390 support."), HAVE_LATENCYTOP_SUPPORT is defined by an architecture to advertise an implementation of save_stack_trace_tsk. However, as of 9212ddb5eada ("stacktrace: provide save_stack_trace_tsk() weak alias") a dummy implementation is provided if STACKTRACE=y. Given that LATENCYTOP already depends on STACKTRACE_SUPPORT and selects STACKTRACE, we can remove HAVE_LATENCYTOP_SUPPORT altogether. Signed-off-by: Will Deacon <will.deacon@arm.com> Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: James Hogan <james.hogan@imgtec.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Helge Deller <deller@gmx.de> Acked-by: Michael Ellerman <mpe@ellerman.id.au> Cc: "David S. Miller" <davem@davemloft.net> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Cc: Ingo Molnar <mingo@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-22parisc: Add Huge Page and HUGETLBFS supportHelge Deller1-0/+3
This patch adds huge page support to allow userspace to allocate huge pages and to use hugetlbfs filesystem on 32- and 64-bit Linux kernels. A later patch will add kernel support to map kernel text and data on huge pages. The only requirement is, that the kernel needs to be compiled for a PA8X00 CPU (PA2.0 architecture). Older PA1.X CPUs do not support variable page sizes. 64bit Kernels are compiled for PA2.0 by default. Technically on parisc multiple physical huge pages may be needed to emulate standard 2MB huge pages. Signed-off-by: Helge Deller <deller@gmx.de>
2015-04-15parisc: expose number of page table levels on Kconfig levelKirill A. Shutemov1-0/+5
We would want to use number of page table level to define mm_struct. Let's expose it as CONFIG_PGTABLE_LEVELS. Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Helge Deller <deller@gmx.de> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-17parisc: hpux - Drop support for HP-UX binariesHelge Deller1-4/+0
This patch series drops the support for 32bit HP-UX binaries. The HP-UX compat layer has always been incomplete and it's unlikely that someone will ever implement it. Furthermore those two commits which enhance the compatibility of Linux on parisc to other architectures: f5a408d: parisc: Make EWOULDBLOCK be equal to EAGAIN on parisc 1f25df2: parisc: Reduce SIGRTMIN from 37 to 32 to behave like other Linux architectures basically make it impossible to implement the HP-UX support correctly. Signed-off-by: Helge Deller <deller@gmx.de>
2014-08-27parisc: Wire up seccomp, getrandom and memfd_create syscallsHelge Deller1-0/+16
With secure computing we only support the SECCOMP_MODE_STRICT mode for now. Signed-off-by: Helge Deller <deller@gmx.de>
2014-07-18parisc: ftrace: Remove check of obsolete variable function_trace_stopSteven Rostedt (Red Hat)1-1/+0
Nothing sets function_trace_stop to disable function tracing anymore. Remove the check for it in the arch code. Link: http://lkml.kernel.org/r/53B08317.7010501@gmx.de Cc: Kyle McMartin <kyle@mcmartin.ca> Acked-by: Helge Deller <deller@gmx.de> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-05-20Merge branch 'parisc-3.15-4' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc fixes from Helge Deller: "There are two patches in here: The first patch greatly improves latency and corrects the memory ordering in our light-weight atomic locking syscall. The second patch ratelimits printing of userspace segfaults in the same way as it's done on other platforms. This fixes a possible DOS on parisc since it prevents the syslog to grow too fast. For example, when the debian acl2 package was built on our debian buildd servers, this package produced lots of gigabytes in syslog in very short time and thus filled our harddisks, which then turned the server nearly completely unaccessible and unresponsive" * 'parisc-3.15-4' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Improve LWS-CAS performance parisc: ratelimit userspace segfault printing
2014-05-15parisc: ratelimit userspace segfault printingHelge Deller1-0/+1
Ratelimit printing of userspace segfaults and make it runtime configurable via the /proc/sys/debug/exception-trace variable. This should resolve syslog from growing way too fast and thus prevents possible system service attacks. Signed-off-by: Helge Deller <deller@gmx.de> Cc: stable@vger.kernel.org # 3.13+
2014-04-12Merge git://git.infradead.org/users/eparis/auditLinus Torvalds1-0/+1
Pull audit updates from Eric Paris. * git://git.infradead.org/users/eparis/audit: (28 commits) AUDIT: make audit_is_compat depend on CONFIG_AUDIT_COMPAT_GENERIC audit: renumber AUDIT_FEATURE_CHANGE into the 1300 range audit: do not cast audit_rule_data pointers pointlesly AUDIT: Allow login in non-init namespaces audit: define audit_is_compat in kernel internal header kernel: Use RCU_INIT_POINTER(x, NULL) in audit.c sched: declare pid_alive as inline audit: use uapi/linux/audit.h for AUDIT_ARCH declarations syscall_get_arch: remove useless function arguments audit: remove stray newline from audit_log_execve_info() audit_panic() call audit: remove stray newlines from audit_log_lost messages audit: include subject in login records audit: remove superfluous new- prefix in AUDIT_LOGIN messages audit: allow user processes to log from another PID namespace audit: anchor all pid references in the initial pid namespace audit: convert PPIDs to the inital PID namespace. pid: get pid_t ppid of task in init_pid_ns audit: rename the misleading audit_get_context() to audit_take_context() audit: Add generic compat syscall support audit: Add CONFIG_HAVE_ARCH_AUDITSYSCALL ...
2014-03-20audit: Add CONFIG_HAVE_ARCH_AUDITSYSCALLAKASHI Takahiro1-0/+1
Currently AUDITSYSCALL has a long list of architecture depencency: depends on AUDIT && (X86 || PARISC || PPC || S390 || IA64 || UML || SPARC64 || SUPERH || (ARM && AEABI && !OABI_COMPAT) || ALPHA) The purpose of this patch is to replace it with HAVE_ARCH_AUDITSYSCALL for simplicity. Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Acked-by: Will Deacon <will.deacon@arm.com> (arm) Acked-by: Richard Guy Briggs <rgb@redhat.com> (audit) Acked-by: Matt Turner <mattst88@gmail.com> (alpha) Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc) Signed-off-by: Eric Paris <eparis@redhat.com>
2014-01-24Kconfig: update flightly outdated CONFIG_SMP documentationRobert Graffham1-4/+4
Remove an outdated reference to "most personal computers" having only one CPU, and change the use of "singleprocessor" and "single processor" in CONFIG_SMP's documentation to "uniprocessor" across all arches where that documentation is present. Signed-off-by: Robert Graffham <psquid@psquid.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-16Merge tag 'for-linus' of git://linux-c6x.org/git/projects/linux-c6x-upstreamingLinus Torvalds1-0/+1
Pull Kconfig cleanups from Mark Salter: "Remove some unused config options from C6X and clean up PC_PARPORT dependencies. The latter was discussed here: https://lkml.org/lkml/2013/10/8/12" * tag 'for-linus' of git://linux-c6x.org/git/projects/linux-c6x-upstreaming: c6x: remove unused COMMON_CLKDEV Kconfig parameter Kconfig cleanup (PARPORT_PC dependencies) x86: select ARCH_MIGHT_HAVE_PC_PARPORT unicore32: select ARCH_MIGHT_HAVE_PC_PARPORT sparc: select ARCH_MIGHT_HAVE_PC_PARPORT sh: select ARCH_MIGHT_HAVE_PC_PARPORT powerpc: select ARCH_MIGHT_HAVE_PC_PARPORT parisc: select ARCH_MIGHT_HAVE_PC_PARPORT mips: select ARCH_MIGHT_HAVE_PC_PARPORT microblaze: select ARCH_MIGHT_HAVE_PC_PARPORT m68k: select ARCH_MIGHT_HAVE_PC_PARPORT ia64: select ARCH_MIGHT_HAVE_PC_PARPORT arm: select ARCH_MIGHT_HAVE_PC_PARPORT alpha: select ARCH_MIGHT_HAVE_PC_PARPORT c6x: remove unused parameter in Kconfig
2013-11-15kernel: remove CONFIG_USE_GENERIC_SMP_HELPERSChristoph Hellwig1-1/+0
We've switched over every architecture that supports SMP to it, so remove the new useless config variable. Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: Jan Kara <jack@suse.cz> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-08parisc: add kernel audit featureHelge Deller1-0/+3
Implement missing functions for parisc to provide kernel audit feature. Signed-off-by: Helge Deller <deller@gmx.de>
2013-10-24parisc: select ARCH_MIGHT_HAVE_PC_PARPORTMark Salter1-0/+1
Architectures which support CONFIG_PARPORT_PC should select ARCH_MIGHT_HAVE_PC_PARPORT. Signed-off-by: Mark Salter <msalter@redhat.com> CC: "James E.J. Bottomley" <jejb@parisc-linux.org> CC: Helge Deller <deller@gmx.de> CC: linux-parisc@vger.kernel.org
2013-09-13Remove GENERIC_HARDIRQ config optionMartin Schwidefsky1-1/+0
After the last architecture switched to generic hard irqs the config options HAVE_GENERIC_HARDIRQS & GENERIC_HARDIRQS and the related code for !CONFIG_GENERIC_HARDIRQS can be removed. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-07-04Merge branch 'kconfig-diet' from Dave HansenLinus Torvalds1-0/+1
Merge Kconfig menu diet patches from Dave Hansen: "I think the "Kernel Hacking" menu has gotten a bit out of hand. It is over 120 lines long on my system with everything enabled and options are scattered around it haphazardly. http://sr71.net/~dave/linux/kconfig-horror.png Let's try to introduce some sanity. This set takes that 120 lines down to 55 and makes it vastly easier to find some things. It's a start. This set stands on its own, but there is plenty of room for follow-up patches. The arch-specific debug options still end up getting stuck in the top-level "kernel hacking" menu. OPTIMIZE_INLINING, for instance, could obviously go in to the "compiler options" menu, but the fact that it is defined in arch/ in a separate Kconfig file keeps it on its own for the moment. The Signed-off-by's in here look funky. I changed employers while working on this set, so I have signoffs from both email addresses" * emailed patches from Dave Hansen <dave@sr71.net>: hang and lockup detection menu kconfig: consolidate printk options group locking debugging options consolidate compilation option configs consolidate runtime testing configs order memory debugging Kconfig options consolidate per-arch stack overflow debugging options
2013-07-04consolidate per-arch stack overflow debugging optionsDave Hansen1-0/+1
Original posting: http://lkml.kernel.org/r/20121214184202.F54094D9@kernel.stglabs.ibm.com Several architectures have similar stack debugging config options. They all pretty much do the same thing, some with slightly differing help text. This patch changes the architectures to instead enable a Kconfig boolean, and then use that boolean in the generic Kconfig.debug to present the actual menu option. This removes a bunch of duplication and adds consistency across arches. Signed-off-by: Dave Hansen <dave@linux.vnet.ibm.com> Reviewed-by: H. Peter Anvin <hpa@zytor.com> Reviewed-by: James Hogan <james.hogan@imgtec.com> Acked-by: Chris Metcalf <cmetcalf@tilera.com> [for tile] Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-06-04Finally eradicate CONFIG_HOTPLUGStephen Rothwell1-1/+0
Ever since commit 45f035ab9b8f ("CONFIG_HOTPLUG should be always on"), it has been basically impossible to build a kernel with CONFIG_HOTPLUG turned off. Remove all the remaining references to it. Cc: Russell King <linux@arm.linux.org.uk> Cc: Doug Thompson <dougthompson@xmission.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Pavel Machek <pavel@ucw.cz> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-11parisc: implement irq stacks - part 2 (v2)Helge Deller1-1/+1
This patch fixes few build issues which were introduced with the last irq stack patch, e.g. the combination of stack overflow check and irq stack. Furthermore we now do proper locking and change the irq bh handler to use the irq stack as well. In /proc/interrupts one now can monitor how huge the irq stack has grown and how often it was preferred over the kernel stack. IRQ stacks are now enabled by default just to make sure that we not overflow the kernel stack by accident. Signed-off-by: Helge Deller <deller@gmx.de>
2013-05-08parisc: implement irq stacksHelge Deller1-0/+8
Default kernel stack size on parisc is 16k. During tests we found that the kernel stack can easily grow beyond 13k, which leaves 3k left for irq processing. This patch adds the possibility to activate an additional stack of 16k per CPU which is being used during irq processing. This implementation does not yet uses this irq stack for the irq bh handler. The assembler code for call_on_stack was heavily cleaned up by John David Anglin. CC: John David Anglin <dave.anglin@bell.net> Signed-off-by: Helge Deller <deller@gmx.de>
2013-05-07parisc: implement atomic64_dec_if_positive()Helge Deller1-0/+1
Signed-off-by: Helge Deller <deller@gmx.de>
2013-05-01Kconfig: consolidate CONFIG_DEBUG_STRICT_USER_COPY_CHECKSStephen Boyd1-0/+1
The help text for this config is duplicated across the x86, parisc, and s390 Kconfig.debug files. Arnd Bergman noted that the help text was slightly misleading and should be fixed to state that enabling this option isn't a problem when using pre 4.4 gcc. To simplify the rewording, consolidate the text into lib/Kconfig.debug and modify it there to be more explicit about when you should say N to this config. Also, make the text a bit more generic by stating that this option enables compile time checks so we can cover architectures which emit warnings vs. ones which emit errors. The details of how an architecture decided to implement the checks isn't as important as the concept of compile time checking of copy_from_user() calls. While we're doing this, remove all the copy_from_user_overflow() code that's duplicated many times and place it into lib/ so that any architecture supporting this option can get the function for free. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Ingo Molnar <mingo@kernel.org> Acked-by: H. Peter Anvin <hpa@zytor.com> Cc: Arjan van de Ven <arjan@linux.intel.com> Acked-by: Helge Deller <deller@gmx.de> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Chris Metcalf <cmetcalf@tilera.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-03-12Select VIRT_TO_BUS directly where neededStephen Rothwell1-1/+1
In commit 887cbce0adea ("arch Kconfig: centralise ARCH_NO_VIRT_TO_BUS") I introduced the config sybmol HAVE_VIRT_TO_BUS and selected that where needed. I am not sure what I was thinking. Instead, just directly select VIRT_TO_BUS where it is needed. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-03-04Merge branch 'fixes-for-3.9-latest' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull second round of PARISC updates from Helge Deller: "The most important fix in this branch is the switch of io_setup, io_getevents and io_submit syscalls to use the available compat syscalls when running 32bit userspace on 64bit kernel. Other than that it's mostly removal of compile warnings." * 'fixes-for-3.9-latest' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: fix redefinition of SET_PERSONALITY parisc: do not install modules when installing kernel parisc: fix compile warnings triggered by atomic_sub(sizeof(),v) parisc: check return value of down_interruptible() in hp_sdc_rtc.c parisc: avoid unitialized variable warning in pa_memcpy() parisc: remove unused variable 'compat_val' parisc: switch to compat_functions of io_setup, io_getevents and io_submit parisc: select ARCH_WANT_FRAME_POINTERS
2013-03-02parisc: select ARCH_WANT_FRAME_POINTERSHelge Deller1-0/+1
Avoid the following warning when configuring the kernel for parisc: warning: (LOCKDEP && FAULT_INJECTION_STACKTRACE_FILTER && LATENCYTOP && KMEMCHECK) selects FRAME_POINTER \ which has unmet direct dependencies (DEBUG_KERNEL && (CRIS || M68K || FRV || UML || AVR32 || SUPERH || \ BLACKFIN || MN10300) || ARCH_WANT_FRAME_POINTERS) Signed-off-by: Helge Deller <deller@gmx.de>
2013-03-02Merge tag 'arc-v3.9-rc1-late' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc Pull new ARC architecture from Vineet Gupta: "Initial ARC Linux port with some fixes on top for 3.9-rc1: I would like to introduce the Linux port to ARC Processors (from Synopsys) for 3.9-rc1. The patch-set has been discussed on the public lists since Nov and has received a fair bit of review, specially from Arnd, tglx, Al and other subsystem maintainers for DeviceTree, kgdb... The arch bits are in arch/arc, some asm-generic changes (acked by Arnd), a minor change to PARISC (acked by Helge). The series is a touch bigger for a new port for 2 main reasons: 1. It enables a basic kernel in first sub-series and adds ptrace/kgdb/.. later 2. Some of the fallout of review (DeviceTree support, multi-platform- image support) were added on top of orig series, primarily to record the revision history. This updated pull request additionally contains - fixes due to our GNU tools catching up with the new syscall/ptrace ABI - some (minor) cross-arch Kconfig updates." * tag 'arc-v3.9-rc1-late' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: (82 commits) ARC: split elf.h into uapi and export it for userspace ARC: Fixup the current ABI version ARC: gdbserver using regset interface possibly broken ARC: Kconfig cleanup tracking cross-arch Kconfig pruning in merge window ARC: make a copy of flat DT ARC: [plat-arcfpga] DT arc-uart bindings change: "baud" => "current-speed" ARC: Ensure CONFIG_VIRT_TO_BUS is not enabled ARC: Fix pt_orig_r8 access ARC: [3.9] Fallout of hlist iterator update ARC: 64bit RTSC timestamp hardware issue ARC: Don't fiddle with non-existent caches ARC: Add self to MAINTAINERS ARC: Provide a default serial.h for uart drivers needing BASE_BAUD ARC: [plat-arcfpga] defconfig for fully loaded ARC Linux ARC: [Review] Multi-platform image #8: platform registers SMP callbacks ARC: [Review] Multi-platform image #7: SMP common code to use callbacks ARC: [Review] Multi-platform image #6: cpu-to-dma-addr optional ARC: [Review] Multi-platform image #5: NR_IRQS defined by ARC core ARC: [Review] Multi-platform image #4: Isolate platform headers ARC: [Review] Multi-platform image #3: switch to board callback ...
2013-02-28arch Kconfig: centralise CONFIG_ARCH_NO_VIRT_TO_BUSStephen Rothwell1-0/+1
Change it to CONFIG_HAVE_VIRT_TO_BUS and set it in all architecures that already provide virt_to_bus(). Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Reviewed-by: James Hogan <james.hogan@imgtec.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: H Hartley Sweeten <hartleys@visionengravers.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Vineet Gupta <Vineet.Gupta1@synopsys.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-23Merge branch 'parisc-3.9' of ↵Linus Torvalds1-0/+21
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc updates from Helge Deller. The bulk of this is optimized page coping/clearing and cache flushing (virtual caches are lovely) by John David Anglin. * 'parisc-3.9' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: (31 commits) arch/parisc/include/asm: use ARRAY_SIZE macro in mmzone.h parisc: remove empty lines and unnecessary #ifdef coding in include/asm/signal.h parisc: sendfile and sendfile64 syscall cleanups parisc: switch to available compat_sched_rr_get_interval implementation parisc: fix fallocate syscall parisc: fix error return codes for rt_sigaction and rt_sigprocmask parisc: convert msgrcv and msgsnd syscalls to use compat layer parisc: correctly wire up mq_* functions for CONFIG_COMPAT case parisc: fix personality on 32bit kernel parisc: wire up process_vm_readv, process_vm_writev, kcmp and finit_module syscalls parisc: led driver requires CONFIG_VM_EVENT_COUNTERS parisc: remove unused compat_rt_sigframe.h header parisc/mm/fault.c: Port OOM changes to do_page_fault parisc: space register variables need to be in native length (unsigned long) parisc: fix ptrace breakage parisc: always detect multiple physical ranges parisc: ensure that mmapped shared pages are aligned at SHMLBA addresses parisc: disable preemption while flushing D- or I-caches through TMPALIAS region parisc: remove IRQF_DISABLED parisc: fixes and cleanups in page cache flushing (4/4) ...
2013-02-22Merge tag 'tty-3.9-rc1' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial patches from Greg Kroah-Hartman: "Here's the big tty/serial driver patches for 3.9-rc1. More tty port rework and fixes from Jiri here, as well as lots of individual serial driver updates and fixes. All of these have been in the linux-next tree for a while." * tag 'tty-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (140 commits) tty: mxser: improve error handling in mxser_probe() and mxser_module_init() serial: imx: fix uninitialized variable warning serial: tegra: assume CONFIG_OF TTY: do not update atime/mtime on read/write lguest: select CONFIG_TTY to build properly. ARM defconfigs: add missing inclusions of linux/platform_device.h fb/exynos: include platform_device.h ARM: sa1100/assabet: include platform_device.h directly serial: imx: Fix recursive locking bug pps: Fix build breakage from decoupling pps from tty tty: Remove ancient hardpps() pps: Additional cleanups in uart_handle_dcd_change pps: Move timestamp read into PPS code proper pps: Don't crash the machine when exiting will do pps: Fix a use-after free bug when unregistering a source. pps: Use pps_lookup_dev to reduce ldisc coupling pps: Add pps_lookup_dev() function tty: serial: uartlite: Support uartlite on big and little endian systems tty: serial: uartlite: Fix sparse and checkpatch warnings serial/arc-uart: Miscll DT related updates (Grant's review comments) ... Fix up trivial conflicts, mostly just due to the TTY config option clashing with the EXPERIMENTAL removal.
2013-02-22Merge tag 'driver-core-3.9-rc1' of ↵Linus Torvalds1-4/+4
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core patches from Greg Kroah-Hartman: "Here is the big driver core merge for 3.9-rc1 There are two major series here, both of which touch lots of drivers all over the kernel, and will cause you some merge conflicts: - add a new function called devm_ioremap_resource() to properly be able to check return values. - remove CONFIG_EXPERIMENTAL Other than those patches, there's not much here, some minor fixes and updates" Fix up trivial conflicts * tag 'driver-core-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (221 commits) base: memory: fix soft/hard_offline_page permissions drivercore: Fix ordering between deferred_probe and exiting initcalls backlight: fix class_find_device() arguments TTY: mark tty_get_device call with the proper const values driver-core: constify data for class_find_device() firmware: Ignore abort check when no user-helper is used firmware: Reduce ifdef CONFIG_FW_LOADER_USER_HELPER firmware: Make user-mode helper optional firmware: Refactoring for splitting user-mode helper code Driver core: treat unregistered bus_types as having no devices watchdog: Convert to devm_ioremap_resource() thermal: Convert to devm_ioremap_resource() spi: Convert to devm_ioremap_resource() power: Convert to devm_ioremap_resource() mtd: Convert to devm_ioremap_resource() mmc: Convert to devm_ioremap_resource() mfd: Convert to devm_ioremap_resource() media: Convert to devm_ioremap_resource() iommu: Convert to devm_ioremap_resource() drm: Convert to devm_ioremap_resource() ...
2013-02-21parisc: convert msgrcv and msgsnd syscalls to use compat layerHelge Deller1-0/+4
Switch over to use the existing compat_* implementation for msgrcv() and msgsnd(). Existing code was even partly buggy since it returned on some paths different error codes than the standard. Signed-off-by: Helge Deller <deller@gmx.de>
2013-02-21parisc: add CONFIG_MLONGCALLS option to enable linkage of huge vmlinux ↵Helge Deller1-0/+17
executables When building a 64bit kernel which includes all necessary drivers and filesystems the vmlinux kernel often gets so huge, that the linker won't be able to resolve the branch stubs. This patch overcomes this limit by providing an option to compile the kernel with the -mlong-calls compiler option. Signed-off-by: Helge Deller <deller@gmx.de>
2013-02-15sysctl: Enable PARISC "unaligned-trap" to be used cross-archVineet Gupta1-0/+1
PARISC defines /proc/sys/kernel/unaligned-trap to runtime toggle unaligned access emulation. The exact mechanics of enablig/disabling are still arch specific, we can make the sysctl usable by other arches. Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Acked-by: Helge Deller <deller@gmx.de> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Helge Deller <deller@gmx.de> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Serge Hallyn <serge.hallyn@canonical.com>
2013-02-04arch Kconfig: Remove references to IRQ_PER_CPUJames Hogan1-1/+0
The IRQ_PER_CPU Kconfig symbol was removed in the following commit: Commit 6a58fb3bad099076f36f0f30f44507bc3275cdb6 ("genirq: Remove CONFIG_IRQ_PER_CPU") merged in v2.6.39-rc1. But IRQ_PER_CPU wasn't removed from any of the architecture Kconfig files where it was defined or selected. It's completely unused so remove the remaining references. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: <uclinux-dist-devel@blackfin.uclinux.org> Cc: <linux-mips@linux-mips.org> Cc: <linuxppc-dev@lists.ozlabs.org> Cc: Mike Frysinger <vapier@gentoo.org> Cc: Fenghua Yu <fenghua.yu@intel.com> Acked-by: Ralf Baechle <ralf@linux-mips.org> Cc: James E.J. Bottomley <jejb@parisc-linux.org> Cc: Helge Deller <deller@gmx.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Acked-by: Paul Mundt <lethal@linux-sh.org> Acked-by: Tony Luck <tony.luck@intel.com> Acked-by: Richard Kuo <rkuo@codeaurora.org> Link: http://lkml.kernel.org/r/1359972583-17134-1-git-send-email-james.hogan@imgtec.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2013-01-24Merge branch 'core/irq_work' of ↵Ingo Molnar1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/frederic/linux-dynticks into irq/core irq_work fixes and cleanups, in preparation for full dyntics support. Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-01-22arch/parisc: remove depends on CONFIG_EXPERIMENTALKees Cook1-4/+4
The CONFIG_EXPERIMENTAL config item has not carried much meaning for a while now and is almost always enabled by default. As agreed during the Linux kernel summit, remove it from any "depends on" lines in Kconfigs. CC: "James E.J. Bottomley" <jejb@parisc-linux.org> CC: Helge Deller <deller@gmx.de> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-19tty: Added a CONFIG_TTY option to allow removal of TTYJoe Millenbach1-0/+1
The option allows you to remove TTY and compile without errors. This saves space on systems that won't support TTY interfaces anyway. bloat-o-meter output is below. The bulk of this patch consists of Kconfig changes adding "depends on TTY" to various serial devices and similar drivers that require the TTY layer. Ideally, these dependencies would occur on a common intermediate symbol such as SERIO, but most drivers "select SERIO" rather than "depends on SERIO", and "select" does not respect dependencies. bloat-o-meter output comparing our previous minimal to new minimal by removing TTY. The list is filtered to not show removed entries with awk '$3 != "-"' as the list was very long. add/remove: 0/226 grow/shrink: 2/14 up/down: 6/-35356 (-35350) function old new delta chr_dev_init 166 170 +4 allow_signal 80 82 +2 static.__warned 143 142 -1 disallow_signal 63 62 -1 __set_special_pids 95 94 -1 unregister_console 126 121 -5 start_kernel 546 541 -5 register_console 593 588 -5 copy_from_user 45 40 -5 sys_setsid 128 120 -8 sys_vhangup 32 19 -13 do_exit 1543 1526 -17 bitmap_zero 60 40 -20 arch_local_irq_save 137 117 -20 release_task 674 652 -22 static.spin_unlock_irqrestore 308 260 -48 Signed-off-by: Joe Millenbach <jmillenbach@gmail.com> Reviewed-by: Jamey Sharp <jamey@minilop.net> Reviewed-by: Josh Triplett <josh@joshtriplett.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-12-20Bury the conditionals from kernel_thread/kernel_execve seriesAl Viro1-2/+0
All architectures have CONFIG_GENERIC_KERNEL_THREAD CONFIG_GENERIC_KERNEL_EXECVE __ARCH_WANT_SYS_EXECVE None of them have __ARCH_WANT_KERNEL_EXECVE and there are only two callers of kernel_execve() (which is a trivial wrapper for do_execve() now) left. Kill the conditionals and make both callers use do_execve(). Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>