summaryrefslogtreecommitdiff
path: root/arch/mips
AgeCommit message (Collapse)AuthorFilesLines
2014-08-06mips: Use get_signal() signal_setup_done()Richard Weinberger5-84/+53
Use the more generic functions get_signal() signal_setup_done() for signal delivery. Signed-off-by: Richard Weinberger <richard@nod.at>
2014-08-05Merge tag 'signed-kvm-ppc-next' of git://github.com/agraf/linux-2.6 into kvmPaolo Bonzini1-1/+1
Patch queue for ppc - 2014-08-01 Highlights in this release include: - BookE: Rework instruction fetch, not racy anymore now - BookE HV: Fix ONE_REG accessors for some in-hardware registers - Book3S: Good number of LE host fixes, enable HV on LE - Book3S: Some misc bug fixes - Book3S HV: Add in-guest debug support - Book3S HV: Preload cache lines on context switch - Remove 440 support Alexander Graf (31): KVM: PPC: Book3s PR: Disable AIL mode with OPAL KVM: PPC: Book3s HV: Fix tlbie compile error KVM: PPC: Book3S PR: Handle hyp doorbell exits KVM: PPC: Book3S PR: Fix ABIv2 on LE KVM: PPC: Book3S PR: Fix sparse endian checks PPC: Add asm helpers for BE 32bit load/store KVM: PPC: Book3S HV: Make HTAB code LE host aware KVM: PPC: Book3S HV: Access guest VPA in BE KVM: PPC: Book3S HV: Access host lppaca and shadow slb in BE KVM: PPC: Book3S HV: Access XICS in BE KVM: PPC: Book3S HV: Fix ABIv2 on LE KVM: PPC: Book3S HV: Enable for little endian hosts KVM: PPC: Book3S: Move vcore definition to end of kvm_arch struct KVM: PPC: Deflect page write faults properly in kvmppc_st KVM: PPC: Book3S: Stop PTE lookup on write errors KVM: PPC: Book3S: Add hack for split real mode KVM: PPC: Book3S: Make magic page properly 4k mappable KVM: PPC: Remove 440 support KVM: Rename and add argument to check_extension KVM: Allow KVM_CHECK_EXTENSION on the vm fd KVM: PPC: Book3S: Provide different CAPs based on HV or PR mode KVM: PPC: Implement kvmppc_xlate for all targets KVM: PPC: Move kvmppc_ld/st to common code KVM: PPC: Remove kvmppc_bad_hva() KVM: PPC: Use kvm_read_guest in kvmppc_ld KVM: PPC: Handle magic page in kvmppc_ld/st KVM: PPC: Separate loadstore emulation from priv emulation KVM: PPC: Expose helper functions for data/inst faults KVM: PPC: Remove DCR handling KVM: PPC: HV: Remove generic instruction emulation KVM: PPC: PR: Handle FSCR feature deselects Alexey Kardashevskiy (1): KVM: PPC: Book3S: Fix LPCR one_reg interface Aneesh Kumar K.V (4): KVM: PPC: BOOK3S: PR: Fix PURR and SPURR emulation KVM: PPC: BOOK3S: PR: Emulate virtual timebase register KVM: PPC: BOOK3S: PR: Emulate instruction counter KVM: PPC: BOOK3S: HV: Update compute_tlbie_rb to handle 16MB base page Anton Blanchard (2): KVM: PPC: Book3S HV: Fix ABIv2 indirect branch issue KVM: PPC: Assembly functions exported to modules need _GLOBAL_TOC() Bharat Bhushan (10): kvm: ppc: bookehv: Added wrapper macros for shadow registers kvm: ppc: booke: Use the shared struct helpers of SRR0 and SRR1 kvm: ppc: booke: Use the shared struct helpers of SPRN_DEAR kvm: ppc: booke: Add shared struct helpers of SPRN_ESR kvm: ppc: booke: Use the shared struct helpers for SPRN_SPRG0-7 kvm: ppc: Add SPRN_EPR get helper function kvm: ppc: bookehv: Save restore SPRN_SPRG9 on guest entry exit KVM: PPC: Booke-hv: Add one reg interface for SPRG9 KVM: PPC: Remove comment saying SPRG1 is used for vcpu pointer KVM: PPC: BOOKEHV: rename e500hv_spr to bookehv_spr Michael Neuling (1): KVM: PPC: Book3S HV: Add H_SET_MODE hcall handling Mihai Caraman (8): KVM: PPC: e500mc: Enhance tlb invalidation condition on vcpu schedule KVM: PPC: e500: Fix default tlb for victim hint KVM: PPC: e500: Emulate power management control SPR KVM: PPC: e500mc: Revert "add load inst fixup" KVM: PPC: Book3e: Add TLBSEL/TSIZE defines for MAS0/1 KVM: PPC: Book3s: Remove kvmppc_read_inst() function KVM: PPC: Allow kvmppc_get_last_inst() to fail KVM: PPC: Bookehv: Get vcpu's last instruction for emulation Paul Mackerras (4): KVM: PPC: Book3S: Controls for in-kernel sPAPR hypercall handling KVM: PPC: Book3S: Allow only implemented hcalls to be enabled or disabled KVM: PPC: Book3S PR: Take SRCU read lock around RTAS kvm_read_guest() call KVM: PPC: Book3S: Make kvmppc_ld return a more accurate error indication Stewart Smith (2): Split out struct kvmppc_vcore creation to separate function Use the POWER8 Micro Partition Prefetch Engine in KVM HV on POWER8 Conflicts: Documentation/virtual/kvm/api.txt
2014-08-05Merge tag 'staging-3.17-rc1' of ↵Linus Torvalds2-5/+8
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging driver updates from Greg KH: "Here's the big pull request for the staging driver tree for 3.17-rc1. Lots of things in here, over 2000 patches, but the best part is this: 1480 files changed, 39070 insertions(+), 254659 deletions(-) Thanks to the great work of Kristina Martšenko, 14 different staging drivers have been removed from the tree as they were obsolete and no one was willing to work on cleaning them up. Other than the driver removals, loads of cleanups are in here (comedi, lustre, etc.) as well as the usual IIO driver updates and additions. All of this has been in the linux-next tree for a while" * tag 'staging-3.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (2199 commits) staging: comedi: addi_apci_1564: remove diagnostic interrupt support code staging: comedi: addi_apci_1564: add subdevice to check diagnostic status staging: wlan-ng: coding style problem fix staging: wlan-ng: fixing coding style problems staging: comedi: ii_pci20kc: request and ioremap memory staging: lustre: bitwise vs logical typo staging: dgnc: Remove unneeded dgnc_trace.c and dgnc_trace.h staging: dgnc: rephrase comment staging: comedi: ni_tio: remove some dead code staging: rtl8723au: Fix static symbol sparse warning staging: rtl8723au: usb_dvobj_init(): Remove unused variable 'pdev_desc' staging: rtl8723au: Do not duplicate kernel provided USB macros staging: rtl8723au: Remove never set struct pwrctrl_priv.bHWPowerdown staging: rtl8723au: Remove two never set variables staging: rtl8723au: RSSI_test is never set staging:r8190: coding style: Fixed checkpatch reported Error staging:r8180: coding style: Fixed too long lines staging:r8180: coding style: Fixed commenting style staging: lustre: ptlrpc: lproc_ptlrpc.c - fix dereferenceing user space buffer staging: lustre: ldlm: ldlm_resource.c - fix dereferenceing user space buffer ...
2014-08-05Merge branch 'locking-core-for-linus' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking updates from Ingo Molnar: "The main changes in this cycle are: - big rtmutex and futex cleanup and robustification from Thomas Gleixner - mutex optimizations and refinements from Jason Low - arch_mutex_cpu_relax() removal and related cleanups - smaller lockdep tweaks" * 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits) arch, locking: Ciao arch_mutex_cpu_relax() locking/lockdep: Only ask for /proc/lock_stat output when available locking/mutexes: Optimize mutex trylock slowpath locking/mutexes: Try to acquire mutex only if it is unlocked locking/mutexes: Delete the MUTEX_SHOW_NO_WAITER macro locking/mutexes: Correct documentation on mutex optimistic spinning rtmutex: Make the rtmutex tester depend on BROKEN futex: Simplify futex_lock_pi_atomic() and make it more robust futex: Split out the first waiter attachment from lookup_pi_state() futex: Split out the waiter check from lookup_pi_state() futex: Use futex_top_waiter() in lookup_pi_state() futex: Make unlock_pi more robust rtmutex: Avoid pointless requeueing in the deadlock detection chain walk rtmutex: Cleanup deadlock detector debug logic rtmutex: Confine deadlock logic to futex rtmutex: Simplify remove_waiter() rtmutex: Document pi chain walk rtmutex: Clarify the boost/deboost part rtmutex: No need to keep task ref for lock owner check rtmutex: Simplify and document try_to_take_rtmutex() ...
2014-08-04Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds20-779/+750
Pull KVM changes from Paolo Bonzini: "These are the x86, MIPS and s390 changes; PPC and ARM will come in a few days. MIPS and s390 have little going on this release; just bugfixes, some small, some larger. The highlights for x86 are nested VMX improvements (Jan Kiszka), optimizations for old processor (up to Nehalem, by me and Bandan Das), and a lot of x86 emulator bugfixes (Nadav Amit). Stephen Rothwell reported a trivial conflict with the tracing branch" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (104 commits) x86/kvm: Resolve shadow warnings in macro expansion KVM: s390: rework broken SIGP STOP interrupt handling KVM: x86: always exit on EOIs for interrupts listed in the IOAPIC redir table KVM: vmx: remove duplicate vmx_mpx_supported() prototype KVM: s390: Fix memory leak on busy SIGP stop x86/kvm: Resolve shadow warning from min macro kvm: Resolve missing-field-initializers warnings Replace NR_VMX_MSR with its definition KVM: x86: Assertions to check no overrun in MSR lists KVM: x86: set rflags.rf during fault injection KVM: x86: Setting rflags.rf during rep-string emulation KVM: x86: DR6/7.RTM cannot be written KVM: nVMX: clean up nested_release_vmcs12 and code around it KVM: nVMX: fix lifetime issues for vmcs02 KVM: x86: Defining missing x86 vectors KVM: x86: emulator injects #DB when RFLAGS.RF is set KVM: x86: Cleanup of rflags.rf cleaning KVM: x86: Clear rflags.rf on emulated instructions KVM: x86: popf emulation should not change RF KVM: x86: Clearing rflags.rf upon skipped emulated instruction ...
2014-08-04Merge tag 'trace-3.17' of ↵Linus Torvalds3-8/+3
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing updates from Steven Rostedt: "This pull request has a lot of work done. The main thing is the changes to the ftrace function callback infrastructure. It's introducing a way to allow different functions to call directly different trampolines instead of all calling the same "mcount" one. The only user of this for now is the function graph tracer, which always had a different trampoline, but the function tracer trampoline was called and did basically nothing, and then the function graph tracer trampoline was called. The difference now, is that the function graph tracer trampoline can be called directly if a function is only being traced by the function graph trampoline. If function tracing is also happening on the same function, the old way is still done. The accounting for this takes up more memory when function graph tracing is activated, as it needs to keep track of which functions it uses. I have a new way that wont take as much memory, but it's not ready yet for this merge window, and will have to wait for the next one. Another big change was the removal of the ftrace_start/stop() calls that were used by the suspend/resume code that stopped function tracing when entering into suspend and resume paths. The stop of ftrace was done because there was some function that would crash the system if one called smp_processor_id()! The stop/start was a big hammer to solve the issue at the time, which was when ftrace was first introduced into Linux. Now ftrace has better infrastructure to debug such issues, and I found the problem function and labeled it with "notrace" and function tracing can now safely be activated all the way down into the guts of suspend and resume Other changes include clean ups of uprobe code, clean up of the trace_seq() code, and other various small fixes and clean ups to ftrace and tracing" * tag 'trace-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (57 commits) ftrace: Add warning if tramp hash does not match nr_trampolines ftrace: Fix trampoline hash update check on rec->flags ring-buffer: Use rb_page_size() instead of open coded head_page size ftrace: Rename ftrace_ops field from trampolines to nr_trampolines tracing: Convert local function_graph functions to static ftrace: Do not copy old hash when resetting tracing: let user specify tracing_thresh after selecting function_graph ring-buffer: Always run per-cpu ring buffer resize with schedule_work_on() tracing: Remove function_trace_stop and HAVE_FUNCTION_TRACE_MCOUNT_TEST s390/ftrace: remove check of obsolete variable function_trace_stop arm64, ftrace: Remove check of obsolete variable function_trace_stop Blackfin: ftrace: Remove check of obsolete variable function_trace_stop metag: ftrace: Remove check of obsolete variable function_trace_stop microblaze: ftrace: Remove check of obsolete variable function_trace_stop MIPS: ftrace: Remove check of obsolete variable function_trace_stop parisc: ftrace: Remove check of obsolete variable function_trace_stop sh: ftrace: Remove check of obsolete variable function_trace_stop sparc64,ftrace: Remove check of obsolete variable function_trace_stop tile: ftrace: Remove check of obsolete variable function_trace_stop ftrace: x86: Remove check of obsolete variable function_trace_stop ...
2014-08-03net: filter: split 'struct sk_filter' into socket and bpf partsAlexei Starovoitov1-4/+4
clean up names related to socket filtering and bpf in the following way: - everything that deals with sockets keeps 'sk_*' prefix - everything that is pure BPF is changed to 'bpf_*' prefix split 'struct sk_filter' into struct sk_filter { atomic_t refcnt; struct rcu_head rcu; struct bpf_prog *prog; }; and struct bpf_prog { u32 jited:1, len:31; struct sock_fprog_kern *orig_prog; unsigned int (*bpf_func)(const struct sk_buff *skb, const struct bpf_insn *filter); union { struct sock_filter insns[0]; struct bpf_insn insnsi[0]; struct work_struct work; }; }; so that 'struct bpf_prog' can be used independent of sockets and cleans up 'unattached' bpf use cases split SK_RUN_FILTER macro into: SK_RUN_FILTER to be used with 'struct sk_filter *' and BPF_PROG_RUN to be used with 'struct bpf_prog *' __sk_filter_release(struct sk_filter *) gains __bpf_prog_release(struct bpf_prog *) helper function also perform related renames for the functions that work with 'struct bpf_prog *', since they're on the same lines: sk_filter_size -> bpf_prog_size sk_filter_select_runtime -> bpf_prog_select_runtime sk_filter_free -> bpf_prog_free sk_unattached_filter_create -> bpf_prog_create sk_unattached_filter_destroy -> bpf_prog_destroy sk_store_orig_filter -> bpf_prog_store_orig_filter sk_release_orig_filter -> bpf_release_orig_filter __sk_migrate_filter -> bpf_migrate_filter __sk_prepare_filter -> bpf_prepare_filter API for attaching classic BPF to a socket stays the same: sk_attach_filter(prog, struct sock *)/sk_detach_filter(struct sock *) and SK_RUN_FILTER(struct sk_filter *, ctx) to execute a program which is used by sockets, tun, af_packet API for 'unattached' BPF programs becomes: bpf_prog_create(struct bpf_prog **)/bpf_prog_destroy(struct bpf_prog *) and BPF_PROG_RUN(struct bpf_prog *, ctx) to execute a program which is used by isdn, ppp, team, seccomp, ptp, xt_bpf, cls_bpf, test_bpf Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-02Merge branch '3.16-fixes' into mips-for-linux-nextRalf Baechle15-28/+116
2014-08-02MIPS: jz4740: remove unnecessary null test before debugfs_removeFabian Frederick1-2/+1
Fix checkpatch warning: WARNING: debugfs_remove(NULL) is safe this check is probably not required Signed-off-by: Fabian Frederick <fabf@skynet.be> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/7225/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-08-02MIPS: Octeon: remove unnecessary null test before debugfs_remove_recursiveFabian Frederick1-2/+1
Fix checkpatch warning: WARNING: debugfs_remove_recursive(NULL) is safe this check is probably not required Signed-off-by: Fabian Frederick <fabf@skynet.be> Acked-by: David Daney <david.daney@cavium.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/7224/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-08-02MIPS: ZBOOT: implement stack protector in compressed boot phaseBen Chan1-0/+14
This patch implements the stack protector code in MIPS compressed boot phase based on the same code added to arm in commit 8779657d29c0ebcc0c94ede4df2f497baf1b563f "stackprotector: Introduce CONFIG_CC_STACKPROTECTOR_STRONG" by Kees Cook <keescook@chromium.org> Signed-off-by: Ben Chan <benchan@chromium.org> Cc: Kees Cook <keescook@chromium.org> Cc: Olof Johansson <olofj@chromium.org> Reviewed-by: Kees Cook <keescook@chromium.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/7175/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-08-02MIPS: mipsreg: remove duplicate MIPS_CONF4_FTLBSETS_SHIFTDan Carpenter1-1/+0
The MIPS_CONF4_FTLBSETS_SHIFT define is cut and pasted twice so we can remove the second define. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: Steven J. Hill <Steven.Hill@imgtec.com> Cc: Markos Chandras <markos.chandras@imgtec.com> Cc: John Crispin <blogic@openwrt.org> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Cc: linux-mips@linux-mips.org Cc: kernel-janitors@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/7063/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-08-02MIPS: Bonito64: remove a duplicate defineDan Carpenter1-1/+0
BONITO_PCIMEMBASECFG_ADDRMASK was cut and pasted twice so we can delete the second define. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: kernel-janitors@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/7062/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-08-02MIPS: Malta: initialise MAARsPaul Burton1-0/+26
Initialise the MAARs such that speculation is enabled for all physical addresses outside of the I/O region. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/7333/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-08-02MIPS: Initialise MAARsPaul Burton2-0/+142
Add initialisation for Memory Accessibility Attribute Registers. Generic code cannot know the platform-specific requirements with regards to speculative accesses, so it simply calls a platform_maar_init function which platforms with MAARs are expected to implement by calling the provided write_maar_pair function & returning the number of MAAR pairs used. A weak default implementation will simply use no MAAR pairs. Any present but unused MAAR pairs are then marked invalid, effectively disabling them. The end result of this patch is that MAARs are all marked invalid, until platforms implement the platform_maar_init function. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/7331/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-08-02MIPS: detect presence of MAARsPaul Burton3-0/+6
Detect the presence of MAAR using the MRP bit in Config5, and record that presence using a CPU option bit. A cpu_has_maar macro will then allow code to conditionalise upon the presence of MAARs. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/7330/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-08-02MIPS: define MAAR register accessors & bitsPaul Burton1-0/+12
Add accessor macros for the Memory Accessibility Attribute Registers (MAARs), the bits contained within the MAARs & the Config5.MRP bit indicating their presence. The only current use of the MAARs is to enable speculative accesses to regions of memory. Besides the potential performance benefits of speculative accesses, they are a requirement for the P5600 core to handle non-128b-aligned MSA vector loads & stores rather than generating an address error. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/7329/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-08-02MIPS: mark MSA experimentalPaul Burton1-2/+1
In light of the commit 16f77de82f2d (Revert "MIPS: Save/restore MSA context around signals") the MSA support in the kernel is incomplete. Until the replacement for the former sigcontext changes is agreed upon and in tree, mark MSA experimental & disable it by default. MSA is only implemented by one CPU supported by the kernel, the P5600. The P5600 is a 32 bit core, and thus MSA can only be used when the experimental CONFIG_MIPS_O32_FP64_SUPPORT option is enabled. Therefore MSA is only being used in experimental settings anyway and this change doesn't actually make any difference beyond clarifying the state of MSA support. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/7311/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-08-02MIPS: Don't build MSA support unless it can be usedPaul Burton1-0/+1
MSA requires that Status.FR == 1, so for MIPS32 tasks MSA can only be used if CONFIG_MIPS_O32_FP64_SUPPORT is enabled. If it is not & the kernel is 32bit, there's no point including support for MSA. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/7310/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-08-02MIPS: consistently clear MSA flags when starting & copying threadsPaul Burton1-0/+3
The TIF_MSA_CTX_LIVE flag (indicating that a task has MSA context which needs to be preserved) was being cleared in start_thread, but the TIF_USEDMSA flag (indicating that a task has used MSA in this timeslice) was not. In copy_thread neither flag was cleared, but both need to be. Without clearing these flags the kernel will proceed to attempt to save MSA context when the task is context switched out, and if the task had not used MSA in the meantime then it will fail because MSA or the FPU are disabled. The end result is typically: do_cpu invoked from kernel context![#1]: CPU: 0 PID: 99 Comm: sh Not tainted 3.16.0-rc4-00025-g6dc9476-dirty #88 task: 8f23dc60 ti: 8f1d8000 task.ti: 8f1d8000 ... Call Trace: [<8010edbc>] resume+0x5c/0x280 [<80481e0c>] __schedule+0x370/0x800 [<80104838>] work_resched+0x8/0x2c Fix by consistently clearing both flags in both functions. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/7309/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-08-02MIPS: 16 byte align MSA vector contextPaul Burton1-2/+8
The MSA specification upon first read appears to suggest that it is safe to perform vector loads & stores with arbitrary alignment. However it leaves provision for "address-dependent exceptions"... Align the vector context to a 16 byte boundary to ensure that the kernel cannot cause any such exceptions. Note that the fpu field of struct thread_struct was already at a 16 byte boundary within the struct, the introduction of FPU_ALIGN simply makes the requirement explicit. The only part of this impacting the generated kernel binary is ARCH_MIN_TASKALIGN. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/7308/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-08-02MIPS: disable preemption whilst initialising MSAPaul Burton2-7/+11
Preemption must be disabled throughout the process of enabling the FPU, enabling MSA & initialising the vector registers. Without doing so it is possible to lose the FPU or MSA whilst initialising them causing that initialisation to fail. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/7307/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-08-02MIPS: ensure MSA gets disabled during bootPaul Burton1-3/+2
The kernel relies upon MSA being disabled when a task begins running, so that it can initialise or restore context in response to the resulting MSA disabled exception. Previously the state of MSA following boot was left as it was before the kernel ran, where MSA could potentially have been enabled. Explicitly disable it during boot to prevent any problems. As a nice side effect the code reads a little better too. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/7306/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-08-02MIPS: fix read_msa_* & write_msa_* functions on non-MSA toolchainsPaul Burton1-4/+4
Commit d96cc3d1ec5d "MIPS: Add microMIPS MSA support." attempted to use the value of a macro within an inline asm statement but instead emitted a comment leading to the cfcmsa & ctcmsa instructions being omitted. Fix that by passing CFC_MSA_INSN & CTC_MSA_INSN as arguments to the asm statements. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/7305/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-08-02MIPS: fix MSA context for tasks which don't use FP firstPaul Burton1-0/+2
If a task does not execute scalar FP instructions prior to using MSA then the flags indicating that the task has live MSA context were not being set. The upper 64b of each vector register would then be lost upon the tasks first context switch after using MSA. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/7500/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-08-02MIPS: init upper 64b of vector registers when MSA is first usedPaul Burton4-9/+56
When a task first makes use of MSA we need to ensure that the upper 64b of the vector registers are set to some value such that no information can be leaked to it from the previous task to use MSA context on the CPU. The architecture formerly specified that these bits would be cleared to 0 when a scalar FP instructions wrote to the aliased FP registers, which would have implicitly handled this as the kernel restored scalar FP context. However more recent versions of the specification now state that the value of the bits in such cases is unpredictable. Initialise them explictly to be sure, and set all the bits to 1 rather than 0 for consistency with the least significant 64b. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/7497/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-08-02MIPS: save/disable MSA in lose_fpuPaul Burton1-3/+12
The kernel depends upon MSA never being enabled when the FPU is not, a condition which is currently violated in a few places (whilst saving sigcontext, following mips_cpu_save). Catch all the problem cases by disabling MSA in lose_fpu, after saving context if necessary. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/7302/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-08-02MIPS: preserve scalar FP CSR when switching vector contextPaul Burton2-1/+8
Switching the vector context implicitly saves & restores the state of the aliased scalar FP data registers, however the scalar FP control & status register is distinct from the MSA control & status register. In order to allow scalar FP to function correctly in programs using MSA, the scalar CSR needs to be saved & restored along with the MSA vector context. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/7301/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-08-02MIPS: save/restore MSACSR register on context switchPaul Burton2-0/+12
I added a field for the MSACSR register in struct mips_fpu_struct, but never actually made use of it... This is a clear bug. Save and restore the MSACSR register along with the vector registers. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/7300/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-08-02MIPS: allow msa.h to be included in assembly filesPaul Burton1-9/+13
Just #ifdef away the C functions when included from an assembly file, as will be done in a following commit. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/7299/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-08-02MIPS: OCTEON: add interface & port definitions for D-Link DSR-1000NAaro Koskinen1-0/+21
Add interface & port definitions for D-Link DSR-1000N. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: David Daney <ddaney.cavm@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/7219/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-08-02MIPS: OCTEON: add USB clock type for D-Link DSR-1000NAaro Koskinen1-0/+1
Add USB clock type for D-Link DSR-1000N. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: David Daney <ddaney.cavm@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/7218/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-08-02MIPS: OCTEON: cvmx-bootinfo: add D-Link DSR-1000NAaro Koskinen1-0/+2
Add a definition for D-Link DSR-1000N router. The bootloader on this board supplies 20006 in the bootinfo; the enum CVMX_BOARD_TYPE_CUST_DSR1000N comes from the GPL sources of the board. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: David Daney <ddaney.cavm@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/7217/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-08-02MIPS: OCTEON: disable HOTPLUG_CPU if the bootloader version is incorrectAaro Koskinen1-3/+9
Disable HOTPLUG_CPU functionality if the bootloader version is incorrect. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: linux-mips@linux-mips.org Cc: David Daney <ddaney.cavm@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/7200/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-08-02MIPS: OCTEON: support disabling HOTPLUG_CPU run-timeAaro Koskinen1-1/+4
If nosmp kernel option given, we can assume HOTPLUG_CPU is disabled. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Acked-by: David Daney <david.daney@cavium.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/7202/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-08-02MIPS: OCTEON: SMP: delete redundant checkAaro Koskinen1-8/+0
The same check is already done earlier in octeon_smp_hotplug_setup(). Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Acked-by: David Daney <david.daney@cavium.com> Cc: linux-mips@linux-mips.org Cc: Aaro Koskinen <aaro.koskinen@iki.fi> Patchwork: https://patchwork.linux-mips.org/patch/7199/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-08-02MIPS: GIC: Fix GICBIS macroJeffrey Deans1-10/+11
The GICBIS macro could update the GIC registers incorrectly, depending on the data value passed in: * Bits were only OR'd into the register data, so register fields could not be cleared. * Bits were OR'd into the register data without masking the data to the correct field width, corrupting adjacent bits. Signed-off-by: Jeffrey Deans <jeffrey.deans@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/7378/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-08-02MIPS: Malta: Fix dispatching of GIC interruptsJeffrey Deans1-7/+18
The Malta malta_ipi_irqdispatch() routine now checks only IPI interrupts when handling IPIs. It could previously call do_IRQ() for non-IPIs, and also call do_IRQ() with an invalid IRQ number if there were no pending GIC interrupts when gic_get_int() was called. Signed-off-by: Jeffrey Deans <jeffrey.deans@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/7377/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-08-02MIPS: GIC: Generalise check for pending interruptsJeffrey Deans2-2/+12
Move most of the functionality of gic_get_int() into a new function gic_get_int_mask() which takes a bitmask of interrupts in which the caller is interested, and returns the subset which are pending for the current CPU. This allows CP0 IRQ dispatch routines to check only the GIC interrupts which are routed to a particular CPU interrupt input. gic_get_int() is reimplemented using gic_get_int_mask() and is retained for use by any platforms for which gic_get_int() is sufficient. Signed-off-by: Jeffrey Deans <jeffrey.deans@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/7376/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-08-02MIPS: GIC: Prevent array overrunJeffrey Deans1-2/+4
A GIC interrupt which is declared as having a GIC_MAP_TO_NMI_MSK mapping causes the cpu parameter to gic_setup_intr() to be increased to 32, causing memory corruption when pcpu_masks[] is written to again later in the function. Signed-off-by: Jeffrey Deans <jeffrey.deans@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: stable@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/7375/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-08-02MIPS: GIC: Remove GIC_FLAG_IPIJeffrey Deans3-7/+5
irq-gic.c:gic_get_int() masks out interrupts from the pending set which aren’t in the pcpu_mask. Only interrupts marked with GIC_FLAG_IPI were set in pcpu_mask, meaning that peripheral interrupts also had to be marked as IPIs. Remove the use of GIC_FLAG_IPI and allow the flags member of struct gic_intr_map to be zero. Signed-off-by: Jeffrey Deans <jeffrey.deans@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/7374/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-08-02MIPS: GIC: Move GIC_NUM_INTRS into platform irq.hJeffrey Deans3-2/+4
The value of GIC_NUM_INTRS is platform-specific. Using a default value from gic.h will result in incorrect behaviour on some systems, so require a suitable definition to be present in the platform's irq.h. Signed-off-by: Jeffrey Deans <jeffrey.deans@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/7373/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-08-02MIPS: GIC: move GIC interrupt bitmap declarationsJeffrey Deans2-12/+12
Several bitmaps are declared in arch/mips/include/asm/gic.h, but the scope of their use is limited to arch/mips/kernel/irq-gic.c. Move the declarations from the header file to the C file. Signed-off-by: Jeffrey Deans <jeffrey.deans@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/7372/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-08-02MIPS: kernel: cpu-probe: Detect unique RI/XI exceptionsLeonid Yegoshin2-0/+10
Detect if the core supports unique exception codes for the Read-Inhibit and Execute-Inhibit exceptions and set the option accordingly. The RI/XI exception support is detected by setting the 27th bit (IEC) of the PageGrain C0 register and reading back the value of that register to verify the bit is enabled. Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/7340/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-08-02MIPS: Use dedicated exception handler if CPU supports RI/XI exceptionsLeonid Yegoshin2-2/+9
Use the regular tlb_do_page_fault_0 (no write) handler to handle the RI and XI exceptions. Also skip the RI/XI validation check on TLB load handler since it's redundant when the CPU has unique RI/XI exceptions. Singed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/7339/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-08-02MIPS: Add new option for unique RI/XI exceptionsLeonid Yegoshin2-0/+4
MIPSr5 added support for unique exception codes for the Read-Inhibit and Execute-Inhibit exceptions. Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/7338/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-08-02MIPS: mm: Use the Hardware Page Table Walker if the core supports itMarkos Chandras4-0/+140
The Hardware Page Table Walker aims to speed up TLB refill exceptions by handling them in the hardware level instead of having a software TLB refill handler. However, a TLB refill exception can still be thrown in certain cases such as, synchronus exceptions, or address translation or memory errors during the HTW operation. As a result of which, HTW must not be considered a complete replacement for the TLB refill software handler, but rather a fast-path for it. For HTW to work, the PWBase register must contain the task's page global directory address so the HTW will kick in on TLB refill exceptions. Due to HTW being a separate engine embedded deep in the CPU pipeline, we need to restart the HTW everytime a PTE changes to avoid HTW fetching a old entry from the page tables. It's also necessary to restart the HTW on context switches to prevent it from fetching a page from the previous process. Finally, since HTW is using the entryhi register to write the translations to the TLB, it's necessary to stop the HTW whenever the entryhi changes (eg for tlb probe perations) and enable it back afterwards. == Performance == The following trivial test was used to measure the performance of the HTW. Using the same root filesystem, the following command was used to measure the number of tlb refill handler executions with and without (using 'nohtw' kernel parameter) HTW support. The kernel was modified to use a scratch register as a counter for the TLB refill exceptions. find /usr -type f -exec ls -lh {} \; HTW Enabled: TLB refill exceptions: 12306 HTW Disabled: TLB refill exceptions: 17805 Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Cc: Markos Chandras <markos.chandras@imgtec.com> Patchwork: https://patchwork.linux-mips.org/patch/7336/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-08-02MIPS: kernel: cpu-probe: Add support for the HardWare Table WalkerMarkos Chandras1-0/+23
Detect if the core implements the HTW and set the option accordingly. Also, add a new kernel parameter called 'nohtw' allowing the user to disable the htw support and fallback to the software refill handler. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/7335/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-08-02MIPS: asm: Add register definitions for Hardware Table WalkerMarkos Chandras1-0/+44
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/7326/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-08-02MIPS: cpu: Add new cpu option for Hardware Table Walker.Markos Chandras3-0/+5
Moreover, report hardware page table walker support as 'htw' in the ASE list of /proc/cpuinfo, if the core implements this feature. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/7334/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-10-01 23:32:54 +0300