summaryrefslogtreecommitdiff
path: root/arch/mips
AgeCommit message (Collapse)AuthorFilesLines
2018-04-03Merge tag 'spi-v4.17' of ↵Linus Torvalds2-12/+38
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull SPI updates from Mark Brown: "A quiet release for SPI, some fixes and small updates for individual drivers with one bigger change from Linus Walleij which coverts the bitbanging SPI driver to use the GPIO descriptor API from Linus Walleij. Since GPIO descriptors were used by platform data this means there's a few changes in arch/ making relevant updates for a few platforms and one misc driver that are affected" * tag 'spi-v4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (24 commits) MAINTAINERS: update Andi's e-mail spi: spi-atmel: Use correct enum for DMA transfer direction spi: sh-msiof: Document R-Car M3-N support spi: sh-msiof: Use correct enum for DMA transfer direction spi: sprd: Add the support of restarting the system spi: sprd: Simplify the transfer function spi: Fix unregistration of controller with fixed SPI bus number spi: rspi: use correct enum for DMA transfer direction spi: jcore: disable ref_clk after getting its rate spi: bcm-qspi: fIX some error handling paths spi: pxa2xx: Disable runtime PM if controller registration fails spi: tegra20-slink: use true and false for boolean values spi: Fix scatterlist elements size in spi_map_buf spi: atmel: init FIFOs before spi enable spi: orion: Prepare space for per-child options spi: orion: Make the error message greppable spi: orion: Rework GPIO CS handling spi: bcm2835aux: Avoid 64-bit arithmetic in xfer len calc spi: spi-gpio: Augment device tree bindings spi: spi-gpio: Rewrite to use GPIO descriptors ...
2018-04-03Merge branch 'syscalls-next' of ↵Linus Torvalds2-13/+15
git://git.kernel.org/pub/scm/linux/kernel/git/brodo/linux Pull removal of in-kernel calls to syscalls from Dominik Brodowski: "System calls are interaction points between userspace and the kernel. Therefore, system call functions such as sys_xyzzy() or compat_sys_xyzzy() should only be called from userspace via the syscall table, but not from elsewhere in the kernel. At least on 64-bit x86, it will likely be a hard requirement from v4.17 onwards to not call system call functions in the kernel: It is better to use use a different calling convention for system calls there, where struct pt_regs is decoded on-the-fly in a syscall wrapper which then hands processing over to the actual syscall function. This means that only those parameters which are actually needed for a specific syscall are passed on during syscall entry, instead of filling in six CPU registers with random user space content all the time (which may cause serious trouble down the call chain). Those x86-specific patches will be pushed through the x86 tree in the near future. Moreover, rules on how data may be accessed may differ between kernel data and user data. This is another reason why calling sys_xyzzy() is generally a bad idea, and -- at most -- acceptable in arch-specific code. This patchset removes all in-kernel calls to syscall functions in the kernel with the exception of arch/. On top of this, it cleans up the three places where many syscalls are referenced or prototyped, namely kernel/sys_ni.c, include/linux/syscalls.h and include/linux/compat.h" * 'syscalls-next' of git://git.kernel.org/pub/scm/linux/kernel/git/brodo/linux: (109 commits) bpf: whitelist all syscalls for error injection kernel/sys_ni: remove {sys_,sys_compat} from cond_syscall definitions kernel/sys_ni: sort cond_syscall() entries syscalls/x86: auto-create compat_sys_*() prototypes syscalls: sort syscall prototypes in include/linux/compat.h net: remove compat_sys_*() prototypes from net/compat.h syscalls: sort syscall prototypes in include/linux/syscalls.h kexec: move sys_kexec_load() prototype to syscalls.h x86/sigreturn: use SYSCALL_DEFINE0 x86: fix sys_sigreturn() return type to be long, not unsigned long x86/ioport: add ksys_ioperm() helper; remove in-kernel calls to sys_ioperm() mm: add ksys_readahead() helper; remove in-kernel calls to sys_readahead() mm: add ksys_mmap_pgoff() helper; remove in-kernel calls to sys_mmap_pgoff() mm: add ksys_fadvise64_64() helper; remove in-kernel call to sys_fadvise64_64() fs: add ksys_fallocate() wrapper; remove in-kernel calls to sys_fallocate() fs: add ksys_p{read,write}64() helpers; remove in-kernel calls to syscalls fs: add ksys_truncate() wrapper; remove in-kernel calls to sys_truncate() fs: add ksys_sync_file_range helper(); remove in-kernel calls to syscall kernel: add ksys_setsid() helper; remove in-kernel call to sys_setsid() kernel: add ksys_unshare() helper; remove in-kernel calls to sys_unshare() ...
2018-04-03Merge branch 'x86-dma-for-linus' of ↵Linus Torvalds4-14/+14
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 dma mapping updates from Ingo Molnar: "This tree, by Christoph Hellwig, switches over the x86 architecture to the generic dma-direct and swiotlb code, and also unifies more of the dma-direct code between architectures. The now unused x86-only primitives are removed" * 'x86-dma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: dma-mapping: Don't clear GFP_ZERO in dma_alloc_attrs swiotlb: Make swiotlb_{alloc,free}_buffer depend on CONFIG_DMA_DIRECT_OPS dma/swiotlb: Remove swiotlb_{alloc,free}_coherent() dma/direct: Handle force decryption for DMA coherent buffers in common code dma/direct: Handle the memory encryption bit in common code dma/swiotlb: Remove swiotlb_set_mem_attributes() set_memory.h: Provide set_memory_{en,de}crypted() stubs x86/dma: Remove dma_alloc_coherent_gfp_flags() iommu/intel-iommu: Enable CONFIG_DMA_DIRECT_OPS=y and clean up intel_{alloc,free}_coherent() iommu/amd_iommu: Use CONFIG_DMA_DIRECT_OPS=y and dma_direct_{alloc,free}() x86/dma/amd_gart: Use dma_direct_{alloc,free}() x86/dma/amd_gart: Look at dev->coherent_dma_mask instead of GFP_DMA x86/dma: Use generic swiotlb_ops x86/dma: Use DMA-direct (CONFIG_DMA_DIRECT_OPS=y) x86/dma: Remove dma_alloc_coherent_mask()
2018-04-03Merge branch 'sched-wait-for-linus' of ↵Linus Torvalds2-2/+4
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull wait_var_event updates from Ingo Molnar: "This introduces the new wait_var_event() API, which is a more flexible waiting primitive than wait_on_atomic_t(). All wait_on_atomic_t() users are migrated over to the new API and wait_on_atomic_t() is removed. The migration fixes one bug and should result in no functional changes for the other usecases" * 'sched-wait-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/wait: Improve __var_waitqueue() code generation sched/wait: Remove the wait_on_atomic_t() API sched/wait, arch/mips: Fix and convert wait_on_atomic_t() usage to the new wait_var_event() API sched/wait, fs/ocfs2: Convert wait_on_atomic_t() usage to the new wait_var_event() API sched/wait, fs/nfs: Convert wait_on_atomic_t() usage to the new wait_var_event() API sched/wait, fs/fscache: Convert wait_on_atomic_t() usage to the new wait_var_event() API sched/wait, fs/btrfs: Convert wait_on_atomic_t() usage to the new wait_var_event() API sched/wait, fs/afs: Convert wait_on_atomic_t() usage to the new wait_var_event() API sched/wait, drivers/media: Convert wait_on_atomic_t() usage to the new wait_var_event() API sched/wait, drivers/drm: Convert wait_on_atomic_t() usage to the new wait_var_event() API sched/wait: Introduce wait_var_event()
2018-04-02mm: add ksys_readahead() helper; remove in-kernel calls to sys_readahead()Dominik Brodowski1-1/+1
Using this helper allows us to avoid the in-kernel calls to the sys_readahead() syscall. The ksys_ prefix denotes that this function is meant as a drop-in replacement for the syscall. In particular, it uses the same calling convention as sys_readahead(). This patch is part of a series which removes in-kernel calls to syscalls. On this basis, the syscall entry path can be streamlined. For details, see http://lkml.kernel.org/r/20180325162527.GA17492@light.dominikbrodowski.net Cc: Andrew Morton <akpm@linux-foundation.org> Cc: linux-mm@kvack.org Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2018-04-02mm: add ksys_mmap_pgoff() helper; remove in-kernel calls to sys_mmap_pgoff()Dominik Brodowski2-4/+6
Using this helper allows us to avoid the in-kernel calls to the sys_mmap_pgoff() syscall. The ksys_ prefix denotes that this function is meant as a drop-in replacement for the syscall. In particular, it uses the same calling convention as sys_mmap_pgoff(). This patch is part of a series which removes in-kernel calls to syscalls. On this basis, the syscall entry path can be streamlined. For details, see http://lkml.kernel.org/r/20180325162527.GA17492@light.dominikbrodowski.net Cc: Andrew Morton <akpm@linux-foundation.org> Cc: linux-mm@kvack.org Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2018-04-02mm: add ksys_fadvise64_64() helper; remove in-kernel call to sys_fadvise64_64()Dominik Brodowski1-1/+1
Using the ksys_fadvise64_64() helper allows us to avoid the in-kernel calls to the sys_fadvise64_64() syscall. The ksys_ prefix denotes that this function is meant as a drop-in replacement for the syscall. In particular, it uses the same calling convention as ksys_fadvise64_64(). Some compat stubs called sys_fadvise64(), which then just passed through the arguments to sys_fadvise64_64(). Get rid of this indirection, and call ksys_fadvise64_64() directly. This patch is part of a series which removes in-kernel calls to syscalls. On this basis, the syscall entry path can be streamlined. For details, see http://lkml.kernel.org/r/20180325162527.GA17492@light.dominikbrodowski.net Cc: Andrew Morton <akpm@linux-foundation.org> Cc: linux-mm@kvack.org Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2018-04-02fs: add ksys_fallocate() wrapper; remove in-kernel calls to sys_fallocate()Dominik Brodowski1-2/+2
Using the ksys_fallocate() wrapper allows us to get rid of in-kernel calls to the sys_fallocate() syscall. The ksys_ prefix denotes that this function is meant as a drop-in replacement for the syscall. In particular, it uses the same calling convention as sys_fallocate(). This patch is part of a series which removes in-kernel calls to syscalls. On this basis, the syscall entry path can be streamlined. For details, see http://lkml.kernel.org/r/20180325162527.GA17492@light.dominikbrodowski.net Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2018-04-02fs: add ksys_p{read,write}64() helpers; remove in-kernel calls to syscallsDominik Brodowski1-2/+2
Using the ksys_p{read,write}64() wrappers allows us to get rid of in-kernel calls to the sys_pread64() and sys_pwrite64() syscalls. The ksys_ prefix denotes that this function is meant as a drop-in replacement for the syscall. In particular, it uses the same calling convention as sys_p{read,write}64(). This patch is part of a series which removes in-kernel calls to syscalls. On this basis, the syscall entry path can be streamlined. For details, see http://lkml.kernel.org/r/20180325162527.GA17492@light.dominikbrodowski.net Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2018-04-02fs: add ksys_truncate() wrapper; remove in-kernel calls to sys_truncate()Dominik Brodowski1-1/+1
Using the ksys_truncate() wrapper allows us to get rid of in-kernel calls to the sys_truncate() syscall. The ksys_ prefix denotes that this function is meant as a drop-in replacement for the syscall. In particular, it uses the same calling convention as sys_truncate(). This patch is part of a series which removes in-kernel calls to syscalls. On this basis, the syscall entry path can be streamlined. For details, see http://lkml.kernel.org/r/20180325162527.GA17492@light.dominikbrodowski.net Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2018-04-02fs: add ksys_sync_file_range helper(); remove in-kernel calls to syscallDominik Brodowski1-1/+1
Using this helper allows us to avoid the in-kernel calls to the sys_sync_file_range() syscall. The ksys_ prefix denotes that this function is meant as a drop-in replacement for the syscall. In particular, it uses the same calling convention as sys_sync_file_range(). This patch is part of a series which removes in-kernel calls to syscalls. On this basis, the syscall entry path can be streamlined. For details, see http://lkml.kernel.org/r/20180325162527.GA17492@light.dominikbrodowski.net Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2018-04-02fs: add ksys_ftruncate() wrapper; remove in-kernel calls to sys_ftruncate()Dominik Brodowski1-1/+1
Using the ksys_ftruncate() wrapper allows us to get rid of in-kernel calls to the sys_ftruncate() syscall. The ksys_ prefix denotes that this function is meant as a drop-in replacement for the syscall. In particular, it uses the same calling convention as sys_ftruncate(). This patch is part of a series which removes in-kernel calls to syscalls. On this basis, the syscall entry path can be streamlined. For details, see http://lkml.kernel.org/r/20180325162527.GA17492@light.dominikbrodowski.net Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2018-04-02Merge remote-tracking branches 'spi/topic/atmel', 'spi/topic/bcm-qspi', ↵Mark Brown2-12/+38
'spi/topic/bcm2835aux', 'spi/topic/dw' and 'spi/topic/gpio' into spi-next
2018-03-29Merge branch 'perf/urgent' into perf/coreIngo Molnar4-30/+27
Conflicts: kernel/events/hw_breakpoint.c Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-24Merge branch 'linus' into x86/dma, to resolve a conflict with upstreamIngo Molnar4-30/+27
Conflicts: arch/x86/mm/init_64.c Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-22MIPS: ralink: Fix booting on MT7621NeilBrown1-20/+22
Since commit 3af5a67c86a3 ("MIPS: Fix early CM probing") the MT7621 has not been able to boot. This commit caused mips_cm_probe() to be called before mt7621.c::proc_soc_init(). prom_soc_init() has a comment explaining that mips_cm_probe() "wipes out the bootloader config" and means that configuration registers are no longer available. It has some code to re-enable this config. Before this re-enable code is run, the sysc register cannot be read, so when SYSC_REG_CHIP_NAME0 is read, a garbage value is returned and panic() is called. If we move the config-repair code to the top of prom_soc_init(), the registers can be read and boot can proceed. Very occasionally, the first register read after the reconfiguration returns garbage, so add a call to __sync(). Fixes: 3af5a67c86a3 ("MIPS: Fix early CM probing") Signed-off-by: NeilBrown <neil@brown.name> Reviewed-by: Matt Redfearn <matt.redfearn@mips.com> Cc: John Crispin <john@phrozen.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: <stable@vger.kernel.org> # 4.5+ Patchwork: https://patchwork.linux-mips.org/patch/18859/ Signed-off-by: James Hogan <jhogan@kernel.org>
2018-03-22MIPS: ralink: Remove ralink_halt()NeilBrown1-7/+0
ralink_halt() does nothing that machine_halt() doesn't already do, so it adds no value. It actually causes incorrect behaviour due to the "unreachable()" at the end. This tells the compiler that the end of the function will never be reached, which isn't true. The compiler responds by not adding a 'return' instruction, so control simply moves on to whatever bytes come afterwards in memory. In my tested, that was the ralink_restart() function. This means that an attempt to 'halt' the machine would actually cause a reboot. So remove ralink_halt() so that a 'halt' really does halt. Fixes: c06e836ada59 ("MIPS: ralink: adds reset code") Signed-off-by: NeilBrown <neil@brown.name> Cc: John Crispin <john@phrozen.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: <stable@vger.kernel.org> # 3.9+ Patchwork: https://patchwork.linux-mips.org/patch/18851/ Signed-off-by: James Hogan <jhogan@kernel.org>
2018-03-22MIPS: lantiq: ase: Enable MFD_SYSCONMathias Kresin1-0/+2
Enable syscon to use it for the RCU MFD on Amazon SE as well. The Amazon SE also has similar reset controller system as Danube and XWAY and use their drivers mostly. As these drivers now need syscon also activate the syscon subsystem for for Amazon SE. Fixes: 2b6639d4c794 ("MIPS: lantiq: Enable MFD_SYSCON to be able to use it for the RCU MFD") Signed-off-by: Mathias Kresin <dev@kresin.me> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: John Crispin <john@phrozen.org> Cc: linux-mips@linux-mips.org Cc: <stable@vger.kernel.org> # 4.14+ Patchwork: https://patchwork.linux-mips.org/patch/18817/ Signed-off-by: James Hogan <jhogan@kernel.org>
2018-03-22MIPS: lantiq: Enable AHB Bus for USBMathias Kresin1-3/+3
On Danube and AR9 the USB core is connected though a AHB bus to the main system cross bar, hence we need to enable the gating clock of the AHB Bus as well to make the USB controller work. Fixes: dea54fbad332 ("phy: Add an USB PHY driver for the Lantiq SoCs using the RCU module") Signed-off-by: Mathias Kresin <dev@kresin.me> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: John Crispin <john@phrozen.org> Cc: linux-mips@linux-mips.org Cc: <stable@vger.kernel.org> # 4.14+ Patchwork: https://patchwork.linux-mips.org/patch/18814/ Signed-off-by: James Hogan <jhogan@kernel.org>
2018-03-22MIPS: lantiq: Fix Danube USB clockMathias Kresin1-1/+1
On Danube the USB0 controller registers are at 1e101000 and the USB0 PHY register is at 1f203018 similar to all other lantiq SoCs. Activate the USB controller gating clock thorough the USB controller driver and not the PHY. This fixes a problem introduced in a previous commit. Fixes: dea54fbad332 ("phy: Add an USB PHY driver for the Lantiq SoCs using the RCU module") Signed-off-by: Mathias Kresin <dev@kresin.me> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: John Crispin <john@phrozen.org> Cc: linux-mips@linux-mips.org Cc: <stable@vger.kernel.org> # 4.14+ Patchwork: https://patchwork.linux-mips.org/patch/18816/ Signed-off-by: James Hogan <jhogan@kernel.org>
2018-03-20dma/direct: Handle the memory encryption bit in common codeChristoph Hellwig4-14/+14
Give the basic phys_to_dma() and dma_to_phys() helpers a __-prefix and add the memory encryption mask to the non-prefixed versions. Use the __-prefixed versions directly instead of clearing the mask again in various places. Tested-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Joerg Roedel <joro@8bytes.org> Cc: Jon Mason <jdmason@kudzu.us> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Muli Ben-Yehuda <mulix@mulix.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: iommu@lists.linux-foundation.org Link: http://lkml.kernel.org/r/20180319103826.12853-13-hch@lst.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-20sched/wait, arch/mips: Fix and convert wait_on_atomic_t() usage to the new ↵Peter Zijlstra2-2/+4
wait_var_event() API The old wait_on_atomic_t() is going to get removed, use the more flexible wait_var_event() API instead. And while there, fix a bug and add the missing wakeup... Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: James Hogan <jhogan@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-19Merge tag 'v4.16-rc6' into perf/core, to pick up fixesIngo Molnar4-4/+14
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-16perf: Fix sibling iterationPeter Zijlstra1-1/+1
Mark noticed that the change to sibling_list changed some iteration semantics; because previously we used group_list as list entry, sibling events would always have an empty sibling_list. But because we now use sibling_list for both list head and list entry, siblings will report as having siblings. Fix this with a custom for_each_sibling_event() iterator. Fixes: 8343aae66167 ("perf/core: Remove perf_event::group_entry") Reported-by: Mark Rutland <mark.rutland@arm.com> Suggested-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: vincent.weaver@maine.edu Cc: alexander.shishkin@linux.intel.com Cc: torvalds@linux-foundation.org Cc: alexey.budankov@linux.intel.com Cc: valery.cherepennikov@intel.com Cc: eranian@google.com Cc: acme@redhat.com Cc: linux-tip-commits@vger.kernel.org Cc: davidcc@google.com Cc: kan.liang@intel.com Cc: Dmitry.Prohorov@intel.com Cc: jolsa@redhat.com Link: https://lkml.kernel.org/r/20180315170129.GX4043@hirez.programming.kicks-ass.net
2018-03-12perf/core: Remove perf_event::group_entryPeter Zijlstra1-1/+1
Now that all the grouping is done with RB trees, we no longer need group_entry and can replace the whole thing with sibling_list. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Mark Rutland <mark.rutland@arm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: David Carrillo-Cisneros <davidcc@google.com> Cc: Dmitri Prokhorov <Dmitry.Prohorov@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Valery Cherepennikov <valery.cherepennikov@intel.com> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-08Merge tag 'mips_fixes_4.16_4' of ↵Linus Torvalds4-4/+14
git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips Pull MIPS fixes from James Hogan: "A miscellaneous pile of MIPS fixes for 4.16: - move put_compat_sigset() to evade hardened usercopy warnings (4.16) - select ARCH_HAVE_PC_{SERIO,PARPORT} for Loongson64 platforms (4.16) - fix kzalloc() failure handling in ath25 (3.19) and Octeon (4.0) - fix disabling of IPIs during BMIPS suspend (3.19)" * tag 'mips_fixes_4.16_4' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips: MIPS: BMIPS: Do not mask IPIs during suspend MIPS: Loongson64: Select ARCH_MIGHT_HAVE_PC_SERIO MIPS: Loongson64: Select ARCH_MIGHT_HAVE_PC_PARPORT signals: Move put_compat_sigset to compat.h to silence hardened usercopy MIPS: OCTEON: irq: Check for null return on kzalloc allocation MIPS: ath25: Check for kzalloc allocation failure
2018-03-06MIPS: BMIPS: Do not mask IPIs during suspendJustin Chen1-4/+4
Commit a3e6c1eff548 ("MIPS: IRQ: Fix disable_irq on CPU IRQs") fixes an issue where disable_irq did not actually disable the irq. The bug caused our IPIs to not be disabled, which actually is the correct behavior. With the addition of commit a3e6c1eff548 ("MIPS: IRQ: Fix disable_irq on CPU IRQs"), the IPIs were getting disabled going into suspend, thus schedule_ipi() was not being called. This caused deadlocks where schedulable task were not being scheduled and other cpus were waiting for them to do something. Add the IRQF_NO_SUSPEND flag so an irq_disable will not be called on the IPIs during suspend. Signed-off-by: Justin Chen <justinpopo6@gmail.com> Fixes: a3e6c1eff548 ("MIPS: IRQ: Fix disabled_irq on CPU IRQs") Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: linux-mips@linux-mips.org Cc: stable@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/17385/ [jhogan@kernel.org: checkpatch: wrap long lines and fix commit refs] Signed-off-by: James Hogan <jhogan@kernel.org>
2018-03-05MIPS: Loongson64: Select ARCH_MIGHT_HAVE_PC_SERIOHuacai Chen1-0/+3
Commit 7a407aa5e0d3 ("MIPS: Push ARCH_MIGHT_HAVE_PC_SERIO down to platform level") moves the global MIPS ARCH_MIGHT_HAVE_PC_SERIO select down to various platforms, but doesn't add it to Loongson64 platforms which need it, so add the selects to these platforms too. Fixes: 7a407aa5e0d3 ("MIPS: Push ARCH_MIGHT_HAVE_PC_SERIO down to platform level") Signed-off-by: Huacai Chen <chenhc@lemote.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/18704/ Signed-off-by: James Hogan <jhogan@kernel.org>
2018-03-05MIPS: Loongson64: Select ARCH_MIGHT_HAVE_PC_PARPORTHuacai Chen1-0/+3
Commit a211a0820d3c ("MIPS: Push ARCH_MIGHT_HAVE_PC_PARPORT down to platform level") moves the global MIPS ARCH_MIGHT_HAVE_PC_PARPORT select down to various platforms, but doesn't add it to Loongson64 platforms which need it, so add the selects to these platforms too. Fixes: a211a0820d3c ("MIPS: Push ARCH_MIGHT_HAVE_PC_PARPORT down to platform level") Signed-off-by: Huacai Chen <chenhc@lemote.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/18703/ Signed-off-by: James Hogan <jhogan@kernel.org>
2018-02-24Merge tag 'mips_fixes_4.16_3' of ↵Linus Torvalds1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips Pull MIPS fix from James Hogan: "A single MIPS fix for mismatching struct compat_flock, resulting in bus errors starting Firefox on Debian 8 since 4.13" * tag 'mips_fixes_4.16_3' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips: MIPS: Drop spurious __unused in struct compat_flock
2018-02-23MIPS: OCTEON: irq: Check for null return on kzalloc allocationColin Ian King1-0/+2
The allocation of host_data is not null checked, leading to a null pointer dereference if the allocation fails. Fix this by adding a null check and return with -ENOMEM. Fixes: 64b139f97c01 ("MIPS: OCTEON: irq: add CIB and other fixes") Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: David Daney <david.daney@cavium.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: "Steven J. Hill" <Steven.Hill@cavium.com> Cc: linux-mips@linux-mips.org Cc: <stable@vger.kernel.org> # 4.0+ Patchwork: https://patchwork.linux-mips.org/patch/18658/ Signed-off-by: James Hogan <jhogan@kernel.org>
2018-02-23MIPS: ath25: Check for kzalloc allocation failureColin Ian King1-0/+2
Currently there is no null check on a failed allocation of board_data, and hence a null pointer dereference will occurr. Fix this by checking for the out of memory null pointer. Fixes: a7473717483e ("MIPS: ath25: add board configuration detection") Signed-off-by: Colin Ian King <colin.king@canonical.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: <stable@vger.kernel.org> # 3.19+ Patchwork: https://patchwork.linux-mips.org/patch/18657/ Signed-off-by: James Hogan <jhogan@kernel.org>
2018-02-23MIPS: boot: Define __ASSEMBLY__ for its.S buildKees Cook1-0/+1
The MIPS %.its.S compiler command did not define __ASSEMBLY__, which meant when compiler_types.h was added to kconfig.h, unexpected things appeared (e.g. struct declarations) which should not have been present. As done in the general %.S compiler command, __ASSEMBLY__ is now included here too. The failure was: Error: arch/mips/boot/vmlinux.gz.its:201.1-2 syntax error FATAL ERROR: Unable to parse input tree /usr/bin/mkimage: Can't read arch/mips/boot/vmlinux.gz.itb.tmp: Invalid argument /usr/bin/mkimage Can't add hashes to FIT blob Reported-by: kbuild test robot <lkp@intel.com> Fixes: 28128c61e08e ("kconfig.h: Include compiler types to avoid missed struct attributes") Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-02-20MIPS: Drop spurious __unused in struct compat_flockJames Hogan1-1/+0
MIPS' struct compat_flock doesn't match the 32-bit struct flock, as it has an extra short __unused before pad[4], which combined with alignment increases the size to 40 bytes compared with struct flock's 36 bytes. Since commit 8c6657cb50cb ("Switch flock copyin/copyout primitives to copy_{from,to}_user()"), put_compat_flock() writes the full compat_flock struct to userland, which results in corruption of the userland word after the struct flock when running 32-bit userlands on 64-bit kernels. This was observed to cause a bus error exception when starting Firefox on Debian 8 (Jessie). Reported-by: Peter Mamonov <pmamonov@gmail.com> Signed-off-by: James Hogan <jhogan@kernel.org> Tested-by: Peter Mamonov <pmamonov@gmail.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-mips@linux-mips.org Cc: <stable@vger.kernel.org> # 4.13+ Patchwork: https://patchwork.linux-mips.org/patch/18646/
2018-02-16Merge tag 'mips_fixes_4.16_2' of ↵Linus Torvalds2-5/+13
git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips Pull MIPS fixes from James Hogan: "A few fixes for outstanding MIPS issues: - an __init section mismatch warning when brcmstb_pm is enabled - a regression handling multiple mem=X@Y arguments (4.11) - a USB Kconfig select warning, and related sparc cleanup (4.16)" * tag 'mips_fixes_4.16_2' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips: sparc,leon: Select USB_UHCI_BIG_ENDIAN_{MMIO,DESC} usb: Move USB_UHCI_BIG_ENDIAN_* out of USB_SUPPORT MIPS: Fix incorrect mem=X@Y handling MIPS: BMIPS: Fix section mismatch warning
2018-02-14spi: spi-gpio: Rewrite to use GPIO descriptorsLinus Walleij2-12/+38
This converts the bit-banged GPIO SPI driver to looking up and using GPIO descriptors to get a handle on GPIO lines for SCK, MOSI, MISO and all CS lines. All existing board files are converted in one go to keep it all consistent. With these conversions I rarely find any interrim steps that makes any sense. Device tree probing and GPIO handling should work like before also after this patch. For board files, we stop using controller data to pass the GPIO line for chip select, instead we pass this as a GPIO descriptor lookup like everything else. In some s3c24xx machines the names of the SPI devices were set to "spi-gpio" rather than "spi_gpio" which can never have worked, I fixed it working (I guess) as part of this patch set. Sometimes I wonder how this code got upstream in the first place, it obviously is not tested. mach-s3c64xx/mach-smartq.c has the same problem and additionally defines the *same* GPIO line for MOSI and MISO which is not going to be accepted by gpiolib. As the lines were number 1,2,2 I assumed it was a typo and use lines 1,2,3. A comment gives awat that line 0 is chip select though no actual SPI device is provided for the LCD supposed to be on this bit-banged SPI bus. I left it intact instead of just deleting the bus though. Kill off board file code that try to initialize the SPI lines to the same values that they will later be set by the spi_gpio driver anyways. Given the huge number of weird things in these board files I do not think this code is very tested or put in with much afterthought anyways. In order to assert that we do not get performance regressions on this crucial bing-banged driver, a ran a script like this dumping the Ilitek ILI9322 regmap 10000 times (it has no caching obviously) on an otherwise idle system in two iterations before and after the patches: #!/bin/sh for run in `seq 10000` do cat /debug/regmap/spi0.0/registers > /dev/null done Before the patch: time test.sh real 3m 41.03s user 0m 29.41s sys 3m 7.22s time test.sh real 3m 44.24s user 0m 32.31s sys 3m 7.60s After the patch: time test.sh real 3m 41.32s user 0m 28.92s sys 3m 8.08s time test.sh real 3m 39.92s user 0m 30.20s sys 3m 5.56s So any performance differences seems to be in the error margin. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Olof Johansson <olof@lixom.net> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-02-13Merge tag 'mips_4.16_2' of ↵Linus Torvalds1-0/+13
git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips Pull MIPS fix from James Hogan: "A single change (and associated DT binding update) to allow the address of the MIPS Cluster Power Controller (CPC) to be chosen by DT, which allows SMP to work on generic MIPS kernels where the bootloader hasn't configured the CPC address (i.e. the new Ranchu platform)" * tag 'mips_4.16_2' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips: MIPS: CPC: Map registers using DT in mips_cpc_default_phys_base() dt-bindings: Document mti,mips-cpc binding
2018-02-13MIPS: Fix incorrect mem=X@Y handlingMarcin Nowakowski1-4/+12
Commit 73fbc1eba7ff ("MIPS: fix mem=X@Y commandline processing") added a fix to ensure that the memory range between PHYS_OFFSET and low memory address specified by mem= cmdline argument is not later processed by free_all_bootmem. This change was incorrect for systems where the commandline specifies more than 1 mem argument, as it will cause all memory between PHYS_OFFSET and each of the memory offsets to be marked as reserved, which results in parts of the RAM marked as reserved (Creator CI20's u-boot has a default commandline argument 'mem=256M@0x0 mem=768M@0x30000000'). Change the behaviour to ensure that only the range between PHYS_OFFSET and the lowest start address of the memories is marked as protected. This change also ensures that the range is marked protected even if it's only defined through the devicetree and not only via commandline arguments. Reported-by: Mathieu Malaterre <mathieu.malaterre@gmail.com> Signed-off-by: Marcin Nowakowski <marcin.nowakowski@mips.com> Fixes: 73fbc1eba7ff ("MIPS: fix mem=X@Y commandline processing") Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: <stable@vger.kernel.org> # v4.11+ Tested-by: Mathieu Malaterre <malat@debian.org> Patchwork: https://patchwork.linux-mips.org/patch/18562/ Signed-off-by: James Hogan <jhogan@kernel.org>
2018-02-13MIPS: BMIPS: Fix section mismatch warningJaedon Shin1-1/+1
Remove the __init annotation from bmips_cpu_setup() to avoid the following warning. WARNING: vmlinux.o(.text+0x35c950): Section mismatch in reference from the function brcmstb_pm_s3() to the function .init.text:bmips_cpu_setup() The function brcmstb_pm_s3() references the function __init bmips_cpu_setup(). This is often because brcmstb_pm_s3 lacks a __init annotation or the annotation of bmips_cpu_setup is wrong. Signed-off-by: Jaedon Shin <jaedon.shin@gmail.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Kevin Cernekee <cernekee@gmail.com> Cc: linux-mips@linux-mips.org Reviewed-by: James Hogan <jhogan@kernel.org> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/18589/ Signed-off-by: James Hogan <jhogan@kernel.org>
2018-02-12unify {de,}mangle_poll(), get rid of kernel-side POLL...Al Viro1-18/+1
except, again, POLLFREE and POLL_BUSY_LOOP. With this, we finally get to the promised end result: - POLL{IN,OUT,...} are plain integers and *not* in __poll_t, so any stray instances of ->poll() still using those will be caught by sparse. - eventpoll.c and select.c warning-free wrt __poll_t - no more kernel-side definitions of POLL... - userland ones are visible through the entire kernel (and used pretty much only for mangle/demangle) - same behavior as after the first series (i.e. sparc et.al. epoll(2) working correctly). Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-02-12vfs: do bulk POLL* -> EPOLL* replacementLinus Torvalds1-2/+2
This is the mindless scripted replacement of kernel use of POLL* variables as described by Al, done by this script: for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'` for f in $L; do sed -i "-es/^\([^\"]*\)\(\<POLL$V\>\)/\\1E\\2/" $f; done done with de-mangling cleanups yet to come. NOTE! On almost all architectures, the EPOLL* constants have the same values as the POLL* constants do. But they keyword here is "almost". For various bad reasons they aren't the same, and epoll() doesn't actually work quite correctly in some cases due to this on Sparc et al. The next patch from Al will sort out the final differences, and we should be all done. Scripted-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-02-11Merge tag 'kvm-4.16-1' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds2-20/+48
Pull KVM updates from Radim Krčmář: "ARM: - icache invalidation optimizations, improving VM startup time - support for forwarded level-triggered interrupts, improving performance for timers and passthrough platform devices - a small fix for power-management notifiers, and some cosmetic changes PPC: - add MMIO emulation for vector loads and stores - allow HPT guests to run on a radix host on POWER9 v2.2 CPUs without requiring the complex thread synchronization of older CPU versions - improve the handling of escalation interrupts with the XIVE interrupt controller - support decrement register migration - various cleanups and bugfixes. s390: - Cornelia Huck passed maintainership to Janosch Frank - exitless interrupts for emulated devices - cleanup of cpuflag handling - kvm_stat counter improvements - VSIE improvements - mm cleanup x86: - hypervisor part of SEV - UMIP, RDPID, and MSR_SMI_COUNT emulation - paravirtualized TLB shootdown using the new KVM_VCPU_PREEMPTED bit - allow guests to see TOPOEXT, GFNI, VAES, VPCLMULQDQ, and more AVX512 features - show vcpu id in its anonymous inode name - many fixes and cleanups - per-VCPU MSR bitmaps (already merged through x86/pti branch) - stable KVM clock when nesting on Hyper-V (merged through x86/hyperv)" * tag 'kvm-4.16-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (197 commits) KVM: PPC: Book3S: Add MMIO emulation for VMX instructions KVM: PPC: Book3S HV: Branch inside feature section KVM: PPC: Book3S HV: Make HPT resizing work on POWER9 KVM: PPC: Book3S HV: Fix handling of secondary HPTEG in HPT resizing code KVM: PPC: Book3S PR: Fix broken select due to misspelling KVM: x86: don't forget vcpu_put() in kvm_arch_vcpu_ioctl_set_sregs() KVM: PPC: Book3S PR: Fix svcpu copying with preemption enabled KVM: PPC: Book3S HV: Drop locks before reading guest memory kvm: x86: remove efer_reload entry in kvm_vcpu_stat KVM: x86: AMD Processor Topology Information x86/kvm/vmx: do not use vm-exit instruction length for fast MMIO when running nested kvm: embed vcpu id to dentry of vcpu anon inode kvm: Map PFN-type memory regions as writable (if possible) x86/kvm: Make it compile on 32bit and with HYPYERVISOR_GUEST=n KVM: arm/arm64: Fixup userspace irqchip static key optimization KVM: arm/arm64: Fix userspace_irqchip_in_use counting KVM: arm/arm64: Fix incorrect timer_is_pending logic MAINTAINERS: update KVM/s390 maintainers MAINTAINERS: add Halil as additional vfio-ccw maintainer MAINTAINERS: add David as a reviewer for KVM/s390 ...
2018-02-10Merge tag 'kbuild-v4.16-2' of ↵Linus Torvalds2-2/+0
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull more Kbuild updates from Masahiro Yamada: "Makefile changes: - enable unused-variable warning that was wrongly disabled for clang Kconfig changes: - warn about blank 'help' and fix existing instances - fix 'choice' behavior to not write out invisible symbols - fix misc weirdness Coccinell changes: - fix false positive of free after managed memory alloc detection - improve performance of NULL dereference detection" * tag 'kbuild-v4.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (21 commits) kconfig: remove const qualifier from sym_expand_string_value() kconfig: add xrealloc() helper kconfig: send error messages to stderr kconfig: echo stdin to stdout if either is redirected kconfig: remove check_stdin() kconfig: remove 'config*' pattern from .gitignnore kconfig: show '?' prompt even if no help text is available kconfig: do not write choice values when their dependency becomes n coccinelle: deref_null: avoid useless computation coccinelle: devm_free: reduce false positives kbuild: clang: disable unused variable warnings only when constant kconfig: Warn if help text is blank nios2: kconfig: Remove blank help text arm: vt8500: kconfig: Remove blank help text MIPS: kconfig: Remove blank help text MIPS: BCM63XX: kconfig: Remove blank help text lib/Kconfig.debug: Remove blank help text Staging: rtl8192e: kconfig: Remove blank help text Staging: rtl8192u: kconfig: Remove blank help text mmc: kconfig: Remove blank help text ...
2018-02-08MIPS: CPC: Map registers using DT in mips_cpc_default_phys_base()Paul Burton1-0/+13
Reading mips_cpc_base value from the DT allows each platform to define it according to its needs. This is especially convenient for MIPS_GENERIC kernel where this kind of information should be determined in runtime. Use mti,mips-cpc compatible string with just a reg property to specify the register location for your platform. Signed-off-by: Paul Burton <paul.burton@mips.com> Signed-off-by: Miodrag Dinic <miodrag.dinic@mips.com> Signed-off-by: Aleksandar Markovic <aleksandar.markovic@mips.com> Cc: linux-mips@linux-mips.org Cc: Ralf Baechle <ralf@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/18513/ Signed-off-by: James Hogan <jhogan@kernel.org>
2018-02-07Merge tag 'mips_fixes_4.16_1' of ↵Linus Torvalds2-7/+14
git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips Pull MIPS fixes from James Hogan: "A couple of MIPS fixes for 4.16-rc1, including an important regression in 4.15 and a rather more longstanding corner case build fix. These are separate from the main pull request as one of the bugs fixed was only recently introduced in v4.15-rc8. - Fix CPS regression on older binutils due to MIPS_ISA_LEVEL_RAW fix (4.15) - Fix allmodconfig + CONFIG_MACH_TX49XX=y builds due to incorrect use of IS_ENABLED() (2.6.28)" * tag 'mips_fixes_4.16_1' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips: MIPS: TXx9: use IS_BUILTIN() for CONFIG_LEDS_CLASS MIPS: CPS: Fix MIPS_ISA_LEVEL_RAW fallout
2018-02-07Merge tag 'mips_4.16' of ↵Linus Torvalds69-535/+997
git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips Pull MIPS updates from James Hogan: "These are the main MIPS changes for 4.16. Rough overview: (1) Basic support for the Ingenic JZ4770 based GCW Zero open-source handheld video game console (2) Support for the Ranchu board (used by Android emulator) (3) Various cleanups and misc improvements More detailed summary: Fixes: - Fix generic platform's USB_*HCI_BIG_ENDIAN selects (4.9) - Fix vmlinuz default build when ZBOOT selected - Fix clean up of vmlinuz targets - Fix command line duplication (in preparation for Ingenic JZ4770) Miscellaneous: - Allow Processor ID reads to be to be optimised away by the compiler (improves performance when running in guest) - Push ARCH_MIGHT_HAVE_PC_SERIO/PARPORT down to platform level to disable on generic platform with Ranchu board support - Add helpers for assembler macro instructions for older assemblers - Use assembler macro instructions to support VZ, XPA & MSA operations on older assemblers, removing C wrapper duplication - Various improvements to VZ & XPA assembly wrappers - Add drivers/platform/mips/ to MIPS MAINTAINERS entry Minor cleanups: - Misc FPU emulation cleanups (removal of unnecessary include, moving macros to common header, checkpatch and sparse fixes) - Remove duplicate assignment of core in play_dead() - Remove duplication in watchpoint handling - Remove mips_dma_mapping_error() stub - Use NULL instead of 0 in prepare_ftrace_return() - Use proper kernel-doc Return keyword for __compute_return_epc_for_insn() - Remove duplicate semicolon in csum_fold() Platform support: Broadcom: - Enable ZBOOT on BCM47xx Generic platform: - Add Ranchu board support, used by Android emulator - Fix machine compatible string matching for Ranchu - Support GIC in EIC mode Ingenic platforms: - Add DT, defconfig and other support for JZ4770 SoC and GCW Zero - Support dynamnic machine types (i.e. JZ4740 / JZ4770 / JZ4780) - Add Ingenic JZ4770 CGU clocks - General Ingenic clk changes to prepare for JZ4770 SoC support - Use common command line handling code - Add DT vendor prefix to GCW (Game Consoles Worldwide) Loongson: - Add MAINTAINERS entry for Loongson2 and Loongson3 platforms - Drop 32-bit support for Loongson 2E/2F devices - Fix build failures due to multiple use of 'MEM_RESERVED'" * tag 'mips_4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips: (53 commits) MIPS: Malta: Sanitize mouse and keyboard configuration. MIPS: Update defconfigs after previous patch. MIPS: Push ARCH_MIGHT_HAVE_PC_SERIO down to platform level MIPS: Push ARCH_MIGHT_HAVE_PC_PARPORT down to platform level MIPS: SMP-CPS: Remove duplicate assignment of core in play_dead MIPS: Generic: Support GIC in EIC mode MIPS: generic: Fix Makefile alignment MIPS: generic: Fix ranchu_of_match[] termination MIPS: generic: Fix machine compatible matching MIPS: Loongson fix name confict - MEM_RESERVED MIPS: bcm47xx: enable ZBOOT support MIPS: Fix trailing semicolon MIPS: Watch: Avoid duplication of bits in mips_read_watch_registers MIPS: Watch: Avoid duplication of bits in mips_install_watch_registers. MIPS: MSA: Update helpers to use new asm macros MIPS: XPA: Standardise readx/writex accessors MIPS: XPA: Allow use of $0 (zero) to MTHC0 MIPS: XPA: Use XPA instructions in assembly MIPS: VZ: Pass GC0 register names in $n format MIPS: VZ: Update helpers to use new asm macros ...
2018-02-06Merge tag 'pci-v4.16-changes' of ↵Linus Torvalds2-9/+9
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: - skip AER driver error recovery callbacks for correctable errors reported via ACPI APEI, as we already do for errors reported via the native path (Tyler Baicar) - fix DPC shared interrupt handling (Alex Williamson) - print full DPC interrupt number (Keith Busch) - enable DPC only if AER is available (Keith Busch) - simplify DPC code (Bjorn Helgaas) - calculate ASPM L1 substate parameter instead of hardcoding it (Bjorn Helgaas) - enable Latency Tolerance Reporting for ASPM L1 substates (Bjorn Helgaas) - move ASPM internal interfaces out of public header (Bjorn Helgaas) - allow hot-removal of VGA devices (Mika Westerberg) - speed up unplug and shutdown by assuming Thunderbolt controllers don't support Command Completed events (Lukas Wunner) - add AtomicOps support for GPU and Infiniband drivers (Felix Kuehling, Jay Cornwall) - expose "ari_enabled" in sysfs to help NIC naming (Stuart Hayes) - clean up PCI DMA interface usage (Christoph Hellwig) - remove PCI pool API (replaced with DMA pool) (Romain Perier) - deprecate pci_get_bus_and_slot(), which assumed PCI domain 0 (Sinan Kaya) - move DT PCI code from drivers/of/ to drivers/pci/ (Rob Herring) - add PCI-specific wrappers for dev_info(), etc (Frederick Lawler) - remove warnings on sysfs mmap failure (Bjorn Helgaas) - quiet ROM validation messages (Alex Deucher) - remove redundant memory alloc failure messages (Markus Elfring) - fill in types for compile-time VGA and other I/O port resources (Bjorn Helgaas) - make "pci=pcie_scan_all" work for Root Ports as well as Downstream Ports to help AmigaOne X1000 (Bjorn Helgaas) - add SPDX tags to all PCI files (Bjorn Helgaas) - quirk Marvell 9128 DMA aliases (Alex Williamson) - quirk broken INTx disable on Ceton InfiniTV4 (Bjorn Helgaas) - fix CONFIG_PCI=n build by adding dummy pci_irqd_intx_xlate() (Niklas Cassel) - use DMA API to get MSI address for DesignWare IP (Niklas Cassel) - fix endpoint-mode DMA mask configuration (Kishon Vijay Abraham I) - fix ARTPEC-6 incorrect IS_ERR() usage (Wei Yongjun) - add support for ARTPEC-7 SoC (Niklas Cassel) - add endpoint-mode support for ARTPEC (Niklas Cassel) - add Cadence PCIe host and endpoint controller driver (Cyrille Pitchen) - handle multiple INTx status bits being set in dra7xx (Vignesh R) - translate dra7xx hwirq range to fix INTD handling (Vignesh R) - remove deprecated Exynos PHY initialization code (Jaehoon Chung) - fix MSI erratum workaround for HiSilicon Hip06/Hip07 (Dongdong Liu) - fix NULL pointer dereference in iProc BCMA driver (Ray Jui) - fix Keystone interrupt-controller-node lookup (Johan Hovold) - constify qcom driver structures (Julia Lawall) - rework Tegra config space mapping to increase space available for endpoints (Vidya Sagar) - simplify Tegra driver by using bus->sysdata (Manikanta Maddireddy) - remove PCI_REASSIGN_ALL_BUS usage on Tegra (Manikanta Maddireddy) - add support for Global Fabric Manager Server (GFMS) event to Microsemi Switchtec switch driver (Logan Gunthorpe) - add IDs for Switchtec PSX 24xG3 and PSX 48xG3 (Kelvin Cao) * tag 'pci-v4.16-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (140 commits) PCI: cadence: Add EndPoint Controller driver for Cadence PCIe controller dt-bindings: PCI: cadence: Add DT bindings for Cadence PCIe endpoint controller PCI: endpoint: Fix EPF device name to support multi-function devices PCI: endpoint: Add the function number as argument to EPC ops PCI: cadence: Add host driver for Cadence PCIe controller dt-bindings: PCI: cadence: Add DT bindings for Cadence PCIe host controller PCI: Add vendor ID for Cadence PCI: Add generic function to probe PCI host controllers PCI: generic: fix missing call of pci_free_resource_list() PCI: OF: Add generic function to parse and allocate PCI resources PCI: Regroup all PCI related entries into drivers/pci/Makefile PCI/DPC: Reformat DPC register definitions PCI/DPC: Add and use DPC Status register field definitions PCI/DPC: Squash dpc_rp_pio_get_info() into dpc_process_rp_pio_error() PCI/DPC: Remove unnecessary RP PIO register structs PCI/DPC: Push dpc->rp_pio_status assignment into dpc_rp_pio_get_info() PCI/DPC: Squash dpc_rp_pio_print_error() into dpc_rp_pio_get_info() PCI/DPC: Make RP PIO log size check more generic PCI/DPC: Rename local "status" to "dpc_status" PCI/DPC: Squash dpc_rp_pio_print_tlp_header() into dpc_rp_pio_print_error() ...
2018-02-06MIPS: Malta: Sanitize mouse and keyboard configuration.Ralf Baechle9-12/+11
While rarely used the Malta has fully functional PS/2 mouse and keyboard ports. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: James Hogan <jhogan@kernel.org>
2018-02-06MIPS: Update defconfigs after previous patch.Ralf Baechle7-7/+0
Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: James Hogan <jhogan@kernel.org>
2018-02-06MIPS: Push ARCH_MIGHT_HAVE_PC_SERIO down to platform levelRalf Baechle1-1/+5
Maybe once upon a time the select of ARCH_MIGHT_HAVE_PC_SERIO used to make sense. These days MIPS platforms long have done away with i8042 or PS/2 style keyboard and mouse ports and embedded systems probably never had them anyway so push the select down to the level of individual platforms. Fixes: f2d0b0d5c171 ("MIPS: ranchu: Add Ranchu as a new generic-based board") Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: James Hogan <jhogan@kernel.org>