summaryrefslogtreecommitdiff
path: root/arch/mips
AgeCommit message (Collapse)AuthorFilesLines
2022-09-23mips: dts: ralink: mt7621: fix external phy on GB-PC2Arınç ÜNAL1-3/+3
The address of the external phy on the mdio bus is 5. Update the devicetree for GB-PC2 accordingly. Fixes: 5bc148649cf3 ("staging: mt7621-dts: fix GB-PC2 devicetree") Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com> Reviewed-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-23mips: dts: ralink: mt7621: change mt7530 switch addressArınç ÜNAL1-2/+2
In the case of muxing phy0 of the MT7530 switch, the switch and the phy will have the same address on the mdio bus, 0. This causes the ethernet driver to fail since devices on the mdio bus cannot share an address. Any address can be used for the switch, therefore, change the switch address to 0x1f. Suggested-by: Sungbo Eo <mans0n@gorani.run> Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com> Reviewed-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-23mips: dts: ralink: mt7621: change phy-mode of gmac1 to rgmiiArınç ÜNAL1-1/+1
Change phy-mode of gmac1 to rgmii on mt7621.dtsi. Same code path is followed for delayed rgmii and rgmii phy-mode on mtk_eth_soc.c. Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com> Reviewed-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-23mips: dts: ralink: mt7621: remove interrupt-parent from switch nodeArınç ÜNAL1-1/+0
The interrupt-parent property is inherited from the ethernet node as it's a parent node of the switch node. Therefore, remove the unnecessary interrupt-parent property from the switch node. Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com> Reviewed-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-23mips: dts: ralink: mt7621: fix some dtc warningsArınç ÜNAL3-20/+14
Fix the dtc warnings below. uartlite@c00: $nodename:0: 'uartlite@c00' does not match '^serial(@.*)?$' From schema: /home/arinc9/Documents/linux/Documentation/devicetree/bindings/serial/8250.yaml uartlite@c00: Unevaluated properties are not allowed ('clock-names' was unexpected) From schema: /home/arinc9/Documents/linux/Documentation/devicetree/bindings/serial/8250.yaml sdhci@1e130000: $nodename:0: 'sdhci@1e130000' does not match '^mmc(@.*)?$' From schema: /home/arinc9/Documents/linux/Documentation/devicetree/bindings/mmc/mtk-sd.yaml xhci@1e1c0000: $nodename:0: 'xhci@1e1c0000' does not match '^usb(@.*)?' From schema: /home/arinc9/Documents/linux/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.yaml xhci@1e1c0000: compatible: ['mediatek,mt8173-xhci'] is too short From schema: /home/arinc9/Documents/linux/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.yaml switch0@0: $nodename:0: 'switch0@0' does not match '^(ethernet-)?switch(@.*)?$' From schema: /home/arinc9/Documents/linux/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml port@1: status:0: 'off' is not one of ['okay', 'disabled', 'reserved'] From schema: /home/arinc9/.local/lib/python3.10/site-packages/dtschema/schemas/dt-core.yaml port@2: status:0: 'off' is not one of ['okay', 'disabled', 'reserved'] From schema: /home/arinc9/.local/lib/python3.10/site-packages/dtschema/schemas/dt-core.yaml port@3: status:0: 'off' is not one of ['okay', 'disabled', 'reserved'] From schema: /home/arinc9/.local/lib/python3.10/site-packages/dtschema/schemas/dt-core.yaml - Change "memc: syscon@5000" to "memc: memory-controller@5000". - Change "uartlite: uartlite@c00" to "serial0: serial@c00" and remove the aliases node. - Remove "clock-names" from the serial0 node. The property doesn't exist on the 8250.yaml schema. - Change "sdhci: sdhci@1e130000" to "mmc: mmc@1e130000". - Change "xhci: xhci@1e1c0000" to "usb: usb@1e1c0000". - Add "mediatek,mtk-xhci" as the second compatible string on the usb node. - Change "switch0: switch0@0" to "switch0: switch@0" - Change "off" to "disabled" for disabled nodes. Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com> Reviewed-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski7-30/+30
drivers/net/ethernet/freescale/fec.h 7b15515fc1ca ("Revert "fec: Restart PPS after link state change"") 40c79ce13b03 ("net: fec: add stop mode support for imx8 platform") https://lore.kernel.org/all/20220921105337.62b41047@canb.auug.org.au/ drivers/pinctrl/pinctrl-ocelot.c c297561bc98a ("pinctrl: ocelot: Fix interrupt controller") 181f604b33cd ("pinctrl: ocelot: add ability to be used in a non-mmio configuration") https://lore.kernel.org/all/20220921110032.7cd28114@canb.auug.org.au/ tools/testing/selftests/drivers/net/bonding/Makefile bbb774d921e2 ("net: Add tests for bonding and team address list management") 152e8ec77640 ("selftests/bonding: add a test for bonding lladdr target") https://lore.kernel.org/all/20220921110437.5b7dbd82@canb.auug.org.au/ drivers/net/can/usb/gs_usb.c 5440428b3da6 ("can: gs_usb: gs_can_open(): fix race dev->can.state condition") 45dfa45f52e6 ("can: gs_usb: add RX and TX hardware timestamp support") https://lore.kernel.org/all/84f45a7d-92b6-4dc5-d7a1-072152fab6ff@tessares.net/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-20smp: add set_nr_cpu_ids()Yury Norov1-1/+1
In preparation to support compile-time nr_cpu_ids, add a setter for the variable. This is a no-op for all arches. Signed-off-by: Yury Norov <yury.norov@gmail.com>
2022-09-19MIPS: BCM47XX: Cast memcmp() of function to (void *)Kees Cook1-2/+2
Clang is especially sensitive about argument type matching when using __overloaded functions (like memcmp(), etc). Help it see that function pointers are just "void *". Avoids this error: arch/mips/bcm47xx/prom.c:89:8: error: no matching function for call to 'memcmp' if (!memcmp(prom_init, prom_init + mem, 32)) ^~~~~~ include/linux/string.h:156:12: note: candidate function not viable: no known conversion from 'void (void)' to 'const void *' for 1st argument extern int memcmp(const void *,const void *,__kernel_size_t); Cc: Hauke Mehrtens <hauke@hauke-m.de> Cc: "Rafał Miłecki" <zajec5@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: linux-mips@vger.kernel.org Cc: Nathan Chancellor <nathan@kernel.org> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: llvm@lists.linux.dev Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/lkml/202209080652.sz2d68e5-lkp@intel.com Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2022-09-19mips: ralink: convert to DEFINE_SHOW_ATTRIBUTELiu Shixin1-13/+2
Use DEFINE_SHOW_ATTRIBUTE helper macro to simplify the code. Signed-off-by: Liu Shixin <liushixin2@huawei.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2022-09-19mips: kernel: convert to DEFINE_SHOW_ATTRIBUTELiu Shixin1-13/+2
Use DEFINE_SHOW_ATTRIBUTE helper macro to simplify the code. Signed-off-by: Liu Shixin <liushixin2@huawei.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2022-09-19mips: cavium: convert to DEFINE_SHOW_ATTRIBUTELiu Shixin1-14/+3
Use DEFINE_SHOW_ATTRIBUTE helper macro to simplify the code. Signed-off-by: Liu Shixin <liushixin2@huawei.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2022-09-19MIPS: AR7: remove orphan declarations from arch/mips/include/asm/mach-ar7/ar7.hGaosheng Cui1-2/+0
All uses of ar7_cpu_clock, ar7_bus_clock and ar7_dsp_clock were removed by commit 780019ddf02f ("MIPS: AR7: Implement clock API"), so remove the orphan declarations, too. Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2022-09-19MIPS: remove orphan sni_cpu_time_init() declarationGaosheng Cui1-3/+0
All uses of sni_cpu_time_init() were removed by commit 4b550488f894 ("[MIPS] Deforest the function pointer jungle in the time code."), so remove the orphan declaration, too. Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2022-09-19MIPS: IRQ: remove orphan declarations from arch/mips/include/asm/irq.hGaosheng Cui1-2/+0
All uses of free_irqno() and alloc_legacy_irqno() were removed by commit 69a07a41d908 ("MIPS: SGI-IP27: rework HUB interrupts"), so remove the orphan declarations, too. Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2022-09-19MIPS: Octeon: remove orphan octeon_hal_setup_reserved32() declarationGaosheng Cui1-1/+0
All uses of octeon_hal_setup_reserved32() were removed by commit 1ef2887030db ("MIPS: Octeon: Remove vestiges of CONFIG_CAVIUM_RESERVE32_USE_WIRED_TLB"), so remove the orphan declaration, too. Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2022-09-19MIPS: Octeon: remove orphan cvmx_fpa_setup_pool() declarationGaosheng Cui1-20/+0
All uses of cvmx_fpa_setup_pool() were removed by commit a03822ea5df6 ("MIPS: OCTEON: Remove some unused files."), so remove the orphan declaration, too. Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2022-09-19MIPS: Octeon: remove orphan octeon_swiotlb declarationGaosheng Cui1-2/+0
All uses of octeon_swiotlb were removed by commit f39f8d0eb081 ("MIPS/octeon: use swiotlb_init instead of open coding it"), so remove the orphan declaration, too. Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2022-09-19MIPS: Loongson2ef: remove orphan sbx00_acpi_init() declarationGaosheng Cui1-2/+0
All uses of sbx00_acpi_init() in the "pci.c" file were removed by commit 5831fdb099dd ("MIPS: Loongson2ef: clean up loongson64 related code"), so remove the orphan declaration, too. Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2022-09-19mips: bmips: bcm63268: add TWD block bindingRafał Miłecki1-6/+12
TWD is an MFD block that contains timers, watchdog & some clocks / reset controller. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2022-09-19MIPS: SGI-IP27: Fix platform-device leak in bridge_platform_create()Lin Yujun1-20/+50
In error case in bridge_platform_create after calling platform_device_add()/platform_device_add_data()/ platform_device_add_resources(), release the failed 'pdev' or it will be leak, call platform_device_put() to fix this problem. Besides, 'pdev' is divided into 'pdev_wd' and 'pdev_bd', use platform_device_unregister() to release sgi_w1 resources when xtalk-bridge registration fails. Fixes: 5dc76a96e95a ("MIPS: PCI: use information from 1-wire PROM for IOC3 detection") Signed-off-by: Lin Yujun <linyujun809@huawei.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2022-09-19MIPS: SGI-IP30: Fix platform-device leak in bridge_platform_create()Lin Yujun1-20/+50
In error case in bridge_platform_create after calling platform_device_add()/platform_device_add_data()/ platform_device_add_resources(), release the failed 'pdev' or it will be leak, call platform_device_put() to fix this problem. Besides, 'pdev' is divided into 'pdev_wd' and 'pdev_bd', use platform_device_unregister() to release sgi_w1 resources when xtalk-bridge registration fails. Fixes: fd27234f24ae ("MIPS: add support for SGI Octane (IP30)") Signed-off-by: Lin Yujun <linyujun809@huawei.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2022-09-19MIPS: Loongson32: Fix PHY-mode being left unspecifiedSerge Semin1-8/+8
commit 0060c8783330 ("net: stmmac: implement support for passive mode converters via dt") has changed the plat->interface field semantics from containing the PHY-mode to specifying the MAC-PCS interface mode. Due to that the loongson32 platform code will leave the phylink interface uninitialized with the PHY-mode intended by the means of the actual platform setup. The commit-author most likely has just missed the arch-specific code to fix. Let's mend the Loongson32 platform code then by assigning the PHY-mode to the phy_interface field of the STMMAC platform data. Fixes: 0060c8783330 ("net: stmmac: implement support for passive mode converters via dt") Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Signed-off-by: Keguang Zhang <keguang.zhang@gmail.com> Tested-by: Keguang Zhang <keguang.zhang@gmail.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2022-09-19MIPS: lantiq: export clk_get_io() for lantiq_wdt.koRandy Dunlap1-0/+1
The lantiq WDT driver uses clk_get_io(), which is not exported, so export it to fix a build error: ERROR: modpost: "clk_get_io" [drivers/watchdog/lantiq_wdt.ko] undefined! Fixes: 287e3f3f4e68 ("MIPS: lantiq: implement support for clkdev api") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: kernel test robot <lkp@intel.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: John Crispin <john@phrozen.org> Cc: linux-mips@vger.kernel.org Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2022-09-12MIPS: dts: lantiq: rename dts files with soc name being the prefixAleksander Jan Bajkowski2-1/+1
Rename lantiq dts files with soc name being the prefix, so that the board dts file can be located easily by soc name, and we also gain the consistency of naming. This patch is a preparation for the addition of dts for newer SoCs (Lantiq ARX100, VRX200 and xRX330). Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2022-09-12MIPS: Fix comments typoShaomin Deng1-1/+1
Remove the repeated word "as" in comments. Signed-off-by: Shaomin Deng <dengshaomin@cdjrlc.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2022-09-12MIPS: ath25: clean up non-kernel-doc comment warningRandy Dunlap1-1/+1
Don't use "/**" kernel-doc notation for comments that are not in kernel-doc format. Eliminates one warning: arch/mips/pci/pci-ar2315.c:6: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst * Both AR2315 and AR2316 chips have PCI interface unit, which supports DMA Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: kernel test robot <lkp@intel.com> Cc: Aditya Srivastava <yashsri421@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: linux-mips@vger.kernel.org Cc: Sergey Ryazanov <ryazanov.s.a@gmail.com> Acked-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2022-09-12MIPS: move from strlcpy with unused retval to strscpyWolfram Sang3-5/+5
Follow the advice of the below link and prefer 'strscpy' in this subsystem. Conversion is 1:1 because the return value is not used. Generated by a coccinelle script. Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/ Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2022-09-12MIPS: Fix comment typoJason Wang1-1/+1
The double `it' is duplicated in the comment, remove one. Signed-off-by: Jason Wang <wangborong@cdjrlc.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2022-09-12kernel: exit: cleanup release_thread()Kefeng Wang1-3/+0
Only x86 has own release_thread(), introduce a new weak release_thread() function to clean empty definitions in other ARCHs. Link: https://lkml.kernel.org/r/20220819014406.32266-1-wangkefeng.wang@huawei.com Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Acked-by: Guo Ren <guoren@kernel.org> [csky] Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Brian Cain <bcain@quicinc.com> Acked-by: Michael Ellerman <mpe@ellerman.id.au> [powerpc] Acked-by: Stafford Horne <shorne@gmail.com> [openrisc] Acked-by: Catalin Marinas <catalin.marinas@arm.com> [arm64] Acked-by: Huacai Chen <chenhuacai@kernel.org> [LoongArch] Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Chris Zankel <chris@zankel.net> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Dinh Nguyen <dinguyen@kernel.org> Cc: Guo Ren <guoren@kernel.org> [csky] Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: Jonas Bonn <jonas@southpole.se> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Richard Henderson <richard.henderson@linaro.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Vineet Gupta <vgupta@kernel.org> Cc: Will Deacon <will@kernel.org> Cc: Xuerui Wang <kernel@xen0n.name> Cc: Yoshinori Sato <ysato@users.osdn.me> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-09-12treewide: defconfig: address renamed CONFIG_DEBUG_INFO=yArnd Bergmann9-9/+9
CONFIG_DEBUG_INFO is now implicitly selected if one picks one of the explicit options that could be DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT, DEBUG_INFO_DWARF4, DEBUG_INFO_DWARF5. This was actually not what I had in mind when I suggested making it a 'choice' statement, but it's too late to change again now, and the Kconfig logic is more sensible in the new form. Change any defconfig file that had CONFIG_DEBUG_INFO enabled but did not pick DWARF4 or DWARF5 explicitly to now pick the toolchain default. Link: https://lkml.kernel.org/r/20220811114609.2097335-1-arnd@kernel.org Fixes: f9b3cd245784 ("Kconfig.debug: make DEBUG_INFO selectable from a choice") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Kees Cook <keescook@chromium.org> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Matt Turner <mattst88@gmail.com> Cc: Vineet Gupta <vgupta@kernel.org> Cc: Michal Simek <monstr@monstr.eu> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Dinh Nguyen <dinguyen@kernel.org> Cc: Yoshinori Sato <ysato@users.osdn.me> Cc: Rich Felker <dalias@libc.org> Cc: Richard Weinberger <richard@nod.at> Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: Chris Zankel <chris@zankel.net> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-09-12arch: mm: rename FORCE_MAX_ZONEORDER to ARCH_FORCE_MAX_ORDERZi Yan1-1/+1
This Kconfig option is used by individual arch to set its desired MAX_ORDER. Rename it to reflect its actual use. Link: https://lkml.kernel.org/r/20220815143959.1511278-1-zi.yan@sent.com Acked-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Zi Yan <ziy@nvidia.com> Acked-by: Guo Ren <guoren@kernel.org> [csky] Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Catalin Marinas <catalin.marinas@arm.com> [arm64] Acked-by: Huacai Chen <chenhuacai@kernel.org> [LoongArch] Acked-by: Michael Ellerman <mpe@ellerman.id.au> [powerpc] Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Taichi Sugaya <sugaya.taichi@socionext.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Qin Jian <qinjian@cqplus1.com> Cc: Guo Ren <guoren@kernel.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Dinh Nguyen <dinguyen@kernel.org> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: "David S. Miller" <davem@davemloft.net> Cc: Chris Zankel <chris@zankel.net> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-09-12mm/madvise: introduce MADV_COLLAPSE sync hugepage collapseZach O'Keefe1-0/+2
This idea was introduced by David Rientjes[1]. Introduce a new madvise mode, MADV_COLLAPSE, that allows users to request a synchronous collapse of memory at their own expense. The benefits of this approach are: * CPU is charged to the process that wants to spend the cycles for the THP * Avoid unpredictable timing of khugepaged collapse Semantics This call is independent of the system-wide THP sysfs settings, but will fail for memory marked VM_NOHUGEPAGE. If the ranges provided span multiple VMAs, the semantics of the collapse over each VMA is independent from the others. This implies a hugepage cannot cross a VMA boundary. If collapse of a given hugepage-aligned/sized region fails, the operation may continue to attempt collapsing the remainder of memory specified. The memory ranges provided must be page-aligned, but are not required to be hugepage-aligned. If the memory ranges are not hugepage-aligned, the start/end of the range will be clamped to the first/last hugepage-aligned address covered by said range. The memory ranges must span at least one hugepage-sized region. All non-resident pages covered by the range will first be swapped/faulted-in, before being internally copied onto a freshly allocated hugepage. Unmapped pages will have their data directly initialized to 0 in the new hugepage. However, for every eligible hugepage aligned/sized region to-be collapsed, at least one page must currently be backed by memory (a PMD covering the address range must already exist). Allocation for the new hugepage may enter direct reclaim and/or compaction, regardless of VMA flags. When the system has multiple NUMA nodes, the hugepage will be allocated from the node providing the most native pages. This operation operates on the current state of the specified process and makes no persistent changes or guarantees on how pages will be mapped, constructed, or faulted in the future Return Value If all hugepage-sized/aligned regions covered by the provided range were either successfully collapsed, or were already PMD-mapped THPs, this operation will be deemed successful. On success, process_madvise(2) returns the number of bytes advised, and madvise(2) returns 0. Else, -1 is returned and errno is set to indicate the error for the most-recently attempted hugepage collapse. Note that many failures might have occurred, since the operation may continue to collapse in the event a single hugepage-sized/aligned region fails. ENOMEM Memory allocation failed or VMA not found EBUSY Memcg charging failed EAGAIN Required resource temporarily unavailable. Try again might succeed. EINVAL Other error: No PMD found, subpage doesn't have Present bit set, "Special" page no backed by struct page, VMA incorrectly sized, address not page-aligned, ... Most notable here is ENOMEM and EBUSY (new to madvise) which are intended to provide the caller with actionable feedback so they may take an appropriate fallback measure. Use Cases An immediate user of this new functionality are malloc() implementations that manage memory in hugepage-sized chunks, but sometimes subrelease memory back to the system in native-sized chunks via MADV_DONTNEED; zapping the pmd. Later, when the memory is hot, the implementation could madvise(MADV_COLLAPSE) to re-back the memory by THPs to regain hugepage coverage and dTLB performance. TCMalloc is such an implementation that could benefit from this[2]. Only privately-mapped anon memory is supported for now, but additional support for file, shmem, and HugeTLB high-granularity mappings[2] is expected. File and tmpfs/shmem support would permit: * Backing executable text by THPs. Current support provided by CONFIG_READ_ONLY_THP_FOR_FS may take a long time on a large system which might impair services from serving at their full rated load after (re)starting. Tricks like mremap(2)'ing text onto anonymous memory to immediately realize iTLB performance prevents page sharing and demand paging, both of which increase steady state memory footprint. With MADV_COLLAPSE, we get the best of both worlds: Peak upfront performance and lower RAM footprints. * Backing guest memory by hugapages after the memory contents have been migrated in native-page-sized chunks to a new host, in a userfaultfd-based live-migration stack. [1] https://lore.kernel.org/linux-mm/d098c392-273a-36a4-1a29-59731cdf5d3d@google.com/ [2] https://github.com/google/tcmalloc/tree/master/tcmalloc [jrdr.linux@gmail.com: avoid possible memory leak in failure path] Link: https://lkml.kernel.org/r/20220713024109.62810-1-jrdr.linux@gmail.com [zokeefe@google.com add missing kfree() to madvise_collapse()] Link: https://lore.kernel.org/linux-mm/20220713024109.62810-1-jrdr.linux@gmail.com/ Link: https://lkml.kernel.org/r/20220713161851.1879439-1-zokeefe@google.com [zokeefe@google.com: delay computation of hpage boundaries until use]] Link: https://lkml.kernel.org/r/20220720140603.1958773-4-zokeefe@google.com Link: https://lkml.kernel.org/r/20220706235936.2197195-10-zokeefe@google.com Signed-off-by: Zach O'Keefe <zokeefe@google.com> Signed-off-by: "Souptick Joarder (HPE)" <jrdr.linux@gmail.com> Suggested-by: David Rientjes <rientjes@google.com> Cc: Alex Shi <alex.shi@linux.alibaba.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Chris Kennelly <ckennelly@google.com> Cc: Chris Zankel <chris@zankel.net> Cc: David Hildenbrand <david@redhat.com> Cc: Helge Deller <deller@gmx.de> Cc: Hugh Dickins <hughd@google.com> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Pasha Tatashin <pasha.tatashin@soleen.com> Cc: Pavel Begunkov <asml.silence@gmail.com> Cc: Peter Xu <peterx@redhat.com> Cc: Rongwei Wang <rongwei.wang@linux.alibaba.com> Cc: SeongJae Park <sj@kernel.org> Cc: Song Liu <songliubraving@fb.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Yang Shi <shy828301@gmail.com> Cc: Zi Yan <ziy@nvidia.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-09-11Merge tag 'mips-fixes_6.0_1' of ↵Linus Torvalds5-22/+21
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux Pull MIPS fixes from Thomas Bogendoerfer: - fix for loongson32 starup hang - fix for octeon irq setup problem - fix compiler warning for new CONFIG option - switch to SPARSEMEM_EXTREME for all platforms selecting SPARSEMEM * tag 'mips-fixes_6.0_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: mips: Select SPARSEMEM_EXTREME MIPS: OCTEON: irq: Fix octeon_irq_force_ciu_mapping() MIPS: octeon: Get rid of preprocessor directives around RESERVE32 MIPS: loongson32: ls1c: Fix hang during startup
2022-09-09mips: Select SPARSEMEM_EXTREMEAlexander Sverdlin1-1/+0
Commit c46173183657 ("MIPS: Add NUMA support for Loongson-3") has increased .bss size of the Octeon kernel from 16k to 16M. Providing the conditions for SPARSEMEM_EXTREME avoids the waste of memory. Thomas has tested the loogsoon64 kernel, where .bss is being reduced by this patch from 16.5M to 515k. Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2022-09-09termios: get rid of non-UAPI asm/termios.hAl Viro1-15/+0
All non-UAPI asm/termios.h consist of include of UAPI counterpart and, possibly, include of linux/uaccess.h The latter can't be simply removed, even though nothing in linux/termios.h doesn't depend upon it anymore - there are several places that rely upon that indirect chain of includes to pull linux/uaccess.h. So the include needs to be lifted out of there - we lift into tty_driver.h, serdev.h and places that pull asm/termios.h, but none of * linux/uaccess.h (obvious) * net/sock.h (pulls uaccess.h) * linux/{tty,tty_driver,serdev}.h (tty.h pulls tty_driver.h) That leaves us just with the include of UAPI asm/termios.h, which is what <asm/termios.h> will resolve to if we simply remove non-UAPI header. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Link: https://lore.kernel.org/r/YxDnKvYCHn/ogBUv@ZenIV Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-09make generic INIT_C_CC a bit more genericAl Viro1-9/+0
turn it into an array initializer; then alpha, mips and powerpc variants fold into it. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Link: https://lore.kernel.org/r/YxDm7M6M91gC2RPL@ZenIV Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-09termios: consolidate values for VDISCARD in INIT_C_CCAl Viro1-1/+1
On old systems it used to be ^O. Linux had never actually used the value, but INIT_C_CC (on i386) did initialize it to ^O; unfortunately, it had a typo in the comment claiming that to be ^U. Most of the architectures copied the (correct) definition along with mistaken comment. alpha, powerpc and sparc tried to make the definition match comment. However, util-linux still resets it to ^O on any architecture, ^O is the historical value, kernel ignores it anyway and finally, Linus said "Just change everybody to do the same, nobody cares about VDISCARD". Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Link: https://lore.kernel.org/r/YxDmy//MKzs3ye7l@ZenIV Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-09termios: start unifying non-UAPI parts of asm/termios.hAl Viro1-9/+0
* new header (linut/termios_internal.h), pulled by the users of those suckers * defaults for INIT_C_CC and externs for conversion helpers moved over there * remove termios-base.h (empty now) Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Link: https://lore.kernel.org/r/YxDmptU7dNGZ+/Hn@ZenIV Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-09termios: uninline conversion helpersAl Viro1-78/+6
default go into drivers/tty/tty_ioctl.c, unusual - into arch/*/kernel/termios.c (only alpha and sparc have those). Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Link: https://lore.kernel.org/r/YxDmeUBHo0s/Ew8b@ZenIV Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-07MIPS: OCTEON: irq: Fix octeon_irq_force_ciu_mapping()Alexander Sverdlin1-0/+10
For irq_domain_associate() to work the virq descriptor has to be pre-allocated in advance. Otherwise the following happens: WARNING: CPU: 0 PID: 0 at .../kernel/irq/irqdomain.c:527 irq_domain_associate+0x298/0x2e8 error: virq128 is not allocated Modules linked in: CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.19.78-... #1 ... Call Trace: [<ffffffff801344c4>] show_stack+0x9c/0x130 [<ffffffff80769550>] dump_stack+0x90/0xd0 [<ffffffff801576d0>] __warn+0x118/0x130 [<ffffffff80157734>] warn_slowpath_fmt+0x4c/0x70 [<ffffffff801b83c0>] irq_domain_associate+0x298/0x2e8 [<ffffffff80a43bb8>] octeon_irq_init_ciu+0x4c8/0x53c [<ffffffff80a76cbc>] of_irq_init+0x1e0/0x388 [<ffffffff80a452cc>] init_IRQ+0x4c/0xf4 [<ffffffff80a3cc00>] start_kernel+0x404/0x698 Use irq_alloc_desc_at() to avoid the above problem. Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2022-09-07MIPS: octeon: Get rid of preprocessor directives around RESERVE32Alexander Sverdlin2-20/+11
Some of them were pointless because CONFIG_CAVIUM_RESERVE32 is now always defined, some were not enough (Yu Zhao reported "Failed to allocate CAVIUM_RESERVE32 memory area" error). Removing the directives allows for compiler coverage of RESERVE32 code and replacing one of [always-true] "ifdef" with a compiler conditional fixes the [cosmetic] error message. Fixes: 3e3114ac460e ("MIPS: Introduce CAVIUM_RESERVE32 Kconfig option") Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2022-09-07Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextPaolo Abeni2-2/+18
Daniel Borkmann says: ==================== pull-request: bpf-next 2022-09-05 The following pull-request contains BPF updates for your *net-next* tree. We've added 106 non-merge commits during the last 18 day(s) which contain a total of 159 files changed, 5225 insertions(+), 1358 deletions(-). There are two small merge conflicts, resolve them as follows: 1) tools/testing/selftests/bpf/DENYLIST.s390x Commit 27e23836ce22 ("selftests/bpf: Add lru_bug to s390x deny list") in bpf tree was needed to get BPF CI green on s390x, but it conflicted with newly added tests on bpf-next. Resolve by adding both hunks, result: [...] lru_bug # prog 'printk': failed to auto-attach: -524 setget_sockopt # attach unexpected error: -524 (trampoline) cb_refs # expected error message unexpected error: -524 (trampoline) cgroup_hierarchical_stats # JIT does not support calling kernel function (kfunc) htab_update # failed to attach: ERROR: strerror_r(-524)=22 (trampoline) [...] 2) net/core/filter.c Commit 1227c1771dd2 ("net: Fix data-races around sysctl_[rw]mem_(max|default).") from net tree conflicts with commit 29003875bd5b ("bpf: Change bpf_setsockopt(SOL_SOCKET) to reuse sk_setsockopt()") from bpf-next tree. Take the code as it is from bpf-next tree, result: [...] if (getopt) { if (optname == SO_BINDTODEVICE) return -EINVAL; return sk_getsockopt(sk, SOL_SOCKET, optname, KERNEL_SOCKPTR(optval), KERNEL_SOCKPTR(optlen)); } return sk_setsockopt(sk, SOL_SOCKET, optname, KERNEL_SOCKPTR(optval), *optlen); [...] The main changes are: 1) Add any-context BPF specific memory allocator which is useful in particular for BPF tracing with bonus of performance equal to full prealloc, from Alexei Starovoitov. 2) Big batch to remove duplicated code from bpf_{get,set}sockopt() helpers as an effort to reuse the existing core socket code as much as possible, from Martin KaFai Lau. 3) Extend BPF flow dissector for BPF programs to just augment the in-kernel dissector with custom logic. In other words, allow for partial replacement, from Shmulik Ladkani. 4) Add a new cgroup iterator to BPF with different traversal options, from Hao Luo. 5) Support for BPF to collect hierarchical cgroup statistics efficiently through BPF integration with the rstat framework, from Yosry Ahmed. 6) Support bpf_{g,s}et_retval() under more BPF cgroup hooks, from Stanislav Fomichev. 7) BPF hash table and local storages fixes under fully preemptible kernel, from Hou Tao. 8) Add various improvements to BPF selftests and libbpf for compilation with gcc BPF backend, from James Hilliard. 9) Fix verifier helper permissions and reference state management for synchronous callbacks, from Kumar Kartikeya Dwivedi. 10) Add support for BPF selftest's xskxceiver to also be used against real devices that support MAC loopback, from Maciej Fijalkowski. 11) Various fixes to the bpf-helpers(7) man page generation script, from Quentin Monnet. 12) Document BPF verifier's tnum_in(tnum_range(), ...) gotchas, from Shung-Hsi Yu. 13) Various minor misc improvements all over the place. * https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (106 commits) bpf: Optimize rcu_barrier usage between hash map and bpf_mem_alloc. bpf: Remove usage of kmem_cache from bpf_mem_cache. bpf: Remove prealloc-only restriction for sleepable bpf programs. bpf: Prepare bpf_mem_alloc to be used by sleepable bpf programs. bpf: Remove tracing program restriction on map types bpf: Convert percpu hash map to per-cpu bpf_mem_alloc. bpf: Add percpu allocation support to bpf_mem_alloc. bpf: Batch call_rcu callbacks instead of SLAB_TYPESAFE_BY_RCU. bpf: Adjust low/high watermarks in bpf_mem_cache bpf: Optimize call_rcu in non-preallocated hash map. bpf: Optimize element count in non-preallocated hash map. bpf: Relax the requirement to use preallocated hash maps in tracing progs. samples/bpf: Reduce syscall overhead in map_perf_test. selftests/bpf: Improve test coverage of test_maps bpf: Convert hash map to bpf_mem_alloc. bpf: Introduce any context BPF specific memory allocator. selftest/bpf: Add test for bpf_getsockopt() bpf: Change bpf_getsockopt(SOL_IPV6) to reuse do_ipv6_getsockopt() bpf: Change bpf_getsockopt(SOL_IP) to reuse do_ip_getsockopt() bpf: Change bpf_getsockopt(SOL_TCP) to reuse do_tcp_getsockopt() ... ==================== Link: https://lore.kernel.org/r/20220905161136.9150-1-daniel@iogearbox.net Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-08-29bpf, mips: No need to use min() to get MAX_TAIL_CALL_CNTTiezhu Yang2-2/+18
MAX_TAIL_CALL_CNT is 33, so min(MAX_TAIL_CALL_CNT, 0xffff) is always MAX_TAIL_CALL_CNT, it is better to use MAX_TAIL_CALL_CNT directly. At the same time, add BUILD_BUG_ON(MAX_TAIL_CALL_CNT > 0xffff) with a comment on why the assertion is there. Suggested-by: Daniel Borkmann <daniel@iogearbox.net> Suggested-by: Johan Almbladh <johan.almbladh@anyfinetworks.com> Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/1661742309-2320-1-git-send-email-yangtiezhu@loongson.cn
2022-08-29MIPS: loongson32: ls1c: Fix hang during startupYang Ling1-1/+0
The RTCCTRL reg of LS1C is obselete. Writing this reg will cause system hang. Fixes: 60219c563c9b6 ("MIPS: Add RTC support for Loongson1C board") Signed-off-by: Yang Ling <gnaygnil@gmail.com> Tested-by: Keguang Zhang <keguang.zhang@gmail.com> Acked-by: Keguang Zhang <keguang.zhang@gmail.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2022-08-26crypto: Kconfig - simplify cipher entriesRobert Elliott1-1/+6
Shorten menu titles and make them consistent: - acronym - name - architecture features in parenthesis - no suffixes like "<something> algorithm", "support", or "hardware acceleration", or "optimized" Simplify help text descriptions, update references, and ensure that https references are still valid. Signed-off-by: Robert Elliott <elliott@hpe.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-08-26crypto: Kconfig - simplify hash entriesRobert Elliott1-13/+21
Shorten menu titles and make them consistent: - acronym - name - architecture features in parenthesis - no suffixes like "<something> algorithm", "support", or "hardware acceleration", or "optimized" Simplify help text descriptions, update references, and ensure that https references are still valid. Signed-off-by: Robert Elliott <elliott@hpe.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-08-26crypto: Kconfig - simplify CRC entriesRobert Elliott1-3/+4
Shorten menu titles and make them consistent: - acronym - name - architecture features in parenthesis - no suffixes like "<something> algorithm", "support", or "hardware acceleration", or "optimized" Simplify help text descriptions, update references, and ensure that https references are still valid. Signed-off-by: Robert Elliott <elliott@hpe.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-08-26crypto: Kconfig - move mips entries to a submenuRobert Elliott1-0/+60
Move CPU-specific crypto/Kconfig entries to arch/xxx/crypto/Kconfig and create a submenu for them under the Crypto API menu. Suggested-by: Eric Biggers <ebiggers@kernel.org> Signed-off-by: Robert Elliott <elliott@hpe.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-08-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski2-8/+6
drivers/net/ethernet/mellanox/mlx5/core/en_fs.c 21234e3a84c7 ("net/mlx5e: Fix use after free in mlx5e_fs_init()") c7eafc5ed068 ("net/mlx5e: Convert ethtool_steering member of flow_steering struct to pointer") https://lore.kernel.org/all/20220825104410.67d4709c@canb.auug.org.au/ https://lore.kernel.org/all/20220823055533.334471-1-saeed@kernel.org/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-22Remove DECnet support from kernelStephen Hemminger6-12/+0
DECnet is an obsolete network protocol that receives more attention from kernel janitors than users. It belongs in computer protocol history museum not in Linux kernel. It has been "Orphaned" in kernel since 2010. The iproute2 support for DECnet was dropped in 5.0 release. The documentation link on Sourceforge says it is abandoned there as well. Leave the UAPI alone to keep userspace programs compiling. This means that there is still an empty neighbour table for AF_DECNET. The table of /proc/sys/net entries was updated to match current directories and reformatted to be alphabetical. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Acked-by: David Ahern <dsahern@kernel.org> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2025-03-15 02:29:32 +0300