summaryrefslogtreecommitdiff
path: root/arch/mips
AgeCommit message (Collapse)AuthorFilesLines
2012-11-23MIPS: Fix crash that occurs when function tracing is enabledAl Cooper1-4/+4
A recent patch changed some irq routines from inlines to functions. These routines are called by the tracer code. Now that they're functions, if they are compiled for function tracing they will call the tracer and crash the system due to infinite recursion. The fix disables tracing in these functions by using "notrace" in the function definition. Signed-off-by: Al Cooper <alcooperx@gmail.com> Reviewed-by: David Daney <david.daney@cavium.com> Pathchwork: https://patchwork.linux-mips.org/patch/4564/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-11-23MIPS: Merge overlapping bootmem rangesRalf Baechle1-6/+20
Without this, we may end up with something like this in /proc/iomem: 01100000-014fffff : System RAM 01100000-013bf48f : Kernel code 013bf490-0149e01f : Kernel data 01500000-0c0fffff : System RAM but the two System RAM ranges should be one single range. This particular case will result in kexec failure on Octeon systems if the kernel being loaded by kexec is bigger than the already running kernel. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-11-17mips, arc: fix build failureDavid Rientjes1-0/+1
Using a cross-compiler to fix another issue, the following build error occurred for mips defconfig: arch/mips/fw/arc/misc.c: In function 'ArcHalt': arch/mips/fw/arc/misc.c:25:2: error: implicit declaration of function 'local_irq_disable' Fix it up by including irqflags.h. Signed-off-by: David Rientjes <rientjes@google.com> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-11-13MIPS: Malta: Fix interupt number of CBUS UART.Ralf Baechle1-1/+2
The CBUS UART's interrupt number was wrong conflicting with the interrupt being tied to the Intel PIIX4. Since the PIIX4's interrupt is registered before the CBUS UART which is not being used on most systems this would not be noticed. Attempts to open the ttyS2 CBUS UART would result in: genirq: Flags mismatch irq 18. 00000000 (serial) vs. 00010000 (XT-PIC cascade) serial_link_irq_chain: request failed: -16 for irq: 18 Qemu was written to match the kernel so will need to be fixed also. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-11-09MIPS: Make irqflags.h functions preempt-safe for non-mipsr2 cpusJim Quinlan3-133/+253
For non MIPSr2 processors, such as the BMIPS 5000, calls to arch_local_irq_disable() and others may be preempted, and in doing so a stale value may be restored to c0_status. This fix disables preemption for such processors prior to the call and enables it after the call. Those functions that needed this fix have been "outlined" to mips-atomic.c, as they are no longer good candidates for inlining. This bug was observed in a BMIPS 5000, occuring once every few hours in a continuous reboot test. It was traced to the write_lock_irq() function which was being invoked in release_task() in exit.c. By placing a number of "nops" inbetween the mfc0/mtc0 pair in arch_local_irq_disable(), which is called by write_lock_irq(), we were able to greatly increase the occurance of this bug. Similarly, the application of this commit silenced the bug. Signed-off-by: Jim Quinlan <jim2101024@gmail.com> Cc: linux-mips@linux-mips.org Cc: David Daney <ddaney.cavm@gmail.com> Cc: Kevin Cernekee cernekee@gmail.com Cc: Jim Quinlan <jim2101024@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/4321/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-11-09MIPS: Remove irqflags.h dependency from bitops.hJim Quinlan5-83/+214
The "else clause" of most functions in bitops.h invoked raw_local_irq_{save,restore}() and in doing so had a dependency on irqflags.h. This fix moves said code to bitops.c, removing the dependency. Signed-off-by: Jim Quinlan <jim2101024@gmail.com> Cc: linux-mips@linux-mips.org Cc: David Daney <ddaney.cavm@gmail.com> Cc: Kevin Cernekee cernekee@gmail.com Cc: Jim Quinlan <jim2101024@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/4320/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-11-09MIPS: bitops.h: Change use of 'unsigned short' to 'int'Jim Quinlan1-7/+7
[ralf@linux-mips.org: No functional change but it's consistent with how use types elsewhere in the code.] Signed-off-by: Jim Quinlan <jim2101024@gmail.com> Cc: linux-mips@linux-mips.org Cc: David Daney <ddaney.cavm@gmail.com> Cc: Kevin Cernekee cernekee@gmail.com Cc: Jim Quinlan <jim2101024@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/4319/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-11-09MIPS: compat: Delete now unused TIF_32BIT.Ralf Baechle1-6/+0
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-11-09MIPS: compat: Implement is_compat_task() by testing for 32-bit address space.Ralf Baechle1-1/+1
So far is_compat_task() was testing for 32-bit registers if O32 support was enabled and if O32 support was disabled but N32 enabled it was testing for 32-bit address space. So if both O32 and N32 were enabled a N32 task was not considered a compat task, whops. This still leaves potential cases where O32 and N32 need different treatment unsolved. But that's another commit. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-11-09MIPS: compat: Fix use of TIF_32BIT_ADDR vs _TIF_32BIT_ADDRRalf Baechle1-1/+1
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-10-18Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds8-25/+68
Pull MIPS fixes from Ralf Baechle: "Random small fixes across the MIPS code." * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: MIPS: CMP: Fix physical core number calculation logic MIPS: JZ4740: Forward declare struct uart_port in header. MIPS: JZ4740: Fix '#include guard' in serial.h MIPS: hugetlbfs: Fix hazard between tlb write and pagemask restoration. MIPS: Restore pagemask after dumping the TLB. MIPS: Hugetlbfs: Handle huge pages correctly in pmd_bad() MIPS: R5000: Fix TLB hazard handling. MIPS: tlbex: Deal with re-definition of label MIPS: Make __{,n,u}delay declarations match definitions and generic delay.h
2012-10-18MIPS: CMP: Fix physical core number calculation logicjerin jacob1-1/+1
The CPUNum Field in EBase register is 10bit wide, so after 1 bit right shift, the mask value should be 0x1ff. Signed-off-by: jerin jacob <jerinjacobk@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/4420/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-10-17MIPS: JZ4740: Forward declare struct uart_port in header.Ralf Baechle1-0/+2
As suggested by Geert Uytterhoeven <geert@linux-m68k.org>. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Cc: Antony Pavlov <antonynpavlov@gmail.com> Cc: linux-mips@linux-mips.org Cc: Lars-Peter Clausen <lars@metafoo.de>
2012-10-17MIPS: JZ4740: Fix '#include guard' in serial.hAntony Pavlov1-0/+1
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Cc: linux-mips@linux-mips.org Cc: Lars-Peter Clausen <lars@metafoo.de> Patchwork: https://patchwork.linux-mips.org/patch/4424/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-10-17UAPI: Place comments in empty arch Kbuilds to make them non-emptyDavid Howells1-0/+1
Place comments in: arch/mips/include/asm/Kbuild arch/tile/include/arch/Kbuild to make them non-empty so that the patch program doesn't remove them when it reduces them to nothing. Possibly they should be just deleted, but it's possible that they'll acquire generic-y or genhdr-y lines in future, so I'm keeping them around for the moment. Note that MIPS will compile happily if the file is deleted instead. I haven't tested TILE, but I suspect it will be the same there. Signed-off-by: David Howells <dhowells@redhat.com> cc: Ralf Baechle <ralf@linux-mips.org> cc: Chris Metcalf <cmetcalf@tilera.com>
2012-10-17MIPS: hugetlbfs: Fix hazard between tlb write and pagemask restoration.Ralf Baechle1-0/+1
On some CPU the write to pagemask might complete before the TLB write instruction reads from the pagemask register. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-10-17MIPS: Restore pagemask after dumping the TLB.Ralf Baechle1-1/+3
Or bad things might happen if the last TLB entry isn't a basic size page. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-10-17MIPS: Hugetlbfs: Handle huge pages correctly in pmd_bad()Ralf Baechle1-1/+14
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-10-17MIPS: R5000: Fix TLB hazard handling.Ralf Baechle1-15/+8
R5000 and the Nevada CPUs (RM5230, RM5231, RM5260, RM5261, RM5270 and RM5271) are basically the same CPU core and all are documented to require two instructions separating a write to c0_pagemask, c0_entryhi, c0_entrylo0, c0_entrylo1 or c0_index. So far we were only providing on cycle before / after a TLBR/TLBWI for R5000 but 3 cycles before and 1 cycles after for the Nevadas. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-10-17MIPS: tlbex: Deal with re-definition of labelRalf Baechle1-7/+34
The microassembler used in tlbex.c does not notice if a label is redefined resulting in relocations against such labels silently missrelocated. The issues exists since commit add6eb04776db4189ea89f596cbcde31b899be9d [Synthesize TLB exception handlers at runtime.] in 2.6.10 and went unnoticed for so long because the relocations for the affected branches got computed to do something *almost* sensible. The issue affects R4000, R4400, QED/IDT RM5230, RM5231, RM5260, RM5261, RM5270 and RM5271 processors. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-10-17MIPS: Make __{,n,u}delay declarations match definitions and generic delay.hDavid Daney2-4/+8
At some recent point arch/mips/include/asm/delay.h has started being included into csrc-octeon.c where the __?delay() functions are defined. This causes a compile failure due to conflicting declarations and definitions of the functions. It turns out that the generic definitions in arch/mips/lib/delay.c also conflict. Proposed fix: Declare the functions to take unsigned long parameters just like asm-generic (and x86) does. Update __delay to agree (__ndelay and __udelay need no change). Bonus: Get rid of 'inline' from __delay() definition, as it is globally visible, and the compiler should be making this decision itself (it does in fact inline the function without being told to). Signed-off-by: David Daney <david.daney@cavium.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/4354/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-10-15Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds106-4493/+2886
Pull MIPS update from Ralf Baechle: "Cleanups and fixes for breakage that occured earlier during this merge phase. Also a few patches that didn't make the first pull request. Of those is the Alchemy work that merges code for many of the SOCs and evaluation boards thus among other code shrinkage, reduces the number of MIPS defconfigs by 5." * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (22 commits) MIPS: SNI: Switch RM400 serial to SCCNXP driver MIPS: Remove unused empty_bad_pmd_table[] declaration. MIPS: MT: Remove kspd. MIPS: Malta: Fix section mismatch. MIPS: asm-offset.c: Delete unused irq_cpustat_t struct offsets. MIPS: Alchemy: Merge PB1100/1500 support into DB1000 code. MIPS: Alchemy: merge PB1550 support into DB1550 code MIPS: Alchemy: Single kernel for DB1200/1300/1550 MIPS: Optimize TLB refill for RI/XI configurations. MIPS: proc: Cleanup printing of ASEs. MIPS: Hardwire detection of DSP ASE Rev 2 for systems, as required. MIPS: Add detection of DSP ASE Revision 2. MIPS: Optimize pgd_init and pmd_init MIPS: perf: Add perf functionality for BMIPS5000 MIPS: perf: Split the Kconfig option CONFIG_MIPS_MT_SMP MIPS: perf: Remove unnecessary #ifdef MIPS: perf: Add cpu feature bit for PCI (performance counter interrupt) MIPS: perf: Change the "mips_perf_event" table unsupported indicator. MIPS: Align swapper_pg_dir to 64K for better TLB Refill code. vmlinux.lds.h: Allow architectures to add sections to the front of .bss ...
2012-10-15Merge branch 'modules-next' of ↵Linus Torvalds5-122/+158
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux Pull module signing support from Rusty Russell: "module signing is the highlight, but it's an all-over David Howells frenzy..." Hmm "Magrathea: Glacier signing key". Somebody has been reading too much HHGTTG. * 'modules-next' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: (37 commits) X.509: Fix indefinite length element skip error handling X.509: Convert some printk calls to pr_devel asymmetric keys: fix printk format warning MODSIGN: Fix 32-bit overflow in X.509 certificate validity date checking MODSIGN: Make mrproper should remove generated files. MODSIGN: Use utf8 strings in signer's name in autogenerated X.509 certs MODSIGN: Use the same digest for the autogen key sig as for the module sig MODSIGN: Sign modules during the build process MODSIGN: Provide a script for generating a key ID from an X.509 cert MODSIGN: Implement module signature checking MODSIGN: Provide module signing public keys to the kernel MODSIGN: Automatically generate module signing keys if missing MODSIGN: Provide Kconfig options MODSIGN: Provide gitignore and make clean rules for extra files MODSIGN: Add FIPS policy module: signature checking hook X.509: Add a crypto key parser for binary (DER) X.509 certificates MPILIB: Provide a function to read raw data into an MPI X.509: Add an ASN.1 decoder X.509: Add simple ASN.1 grammar compiler ...
2012-10-13Merge tag 'for_linus-3.7' of ↵Linus Torvalds1-0/+9
git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/kgdb Pull KGDB/KDB fixes and cleanups from Jason Wessel: "Cleanups - Clean up compile warnings in kgdboc.c and x86/kernel/kgdb.c - Add module event hooks for simplified debugging with gdb Fixes - Fix kdb to stop paging with 'q' on bta and dmesg - Fix for data that scrolls off the vga console due to line wrapping when using the kdb pager New - The debug core registers for kernel module events which allows a kernel aware gdb to automatically load symbols and break on entry to a kernel module - Allow kgdboc=kdb to setup kdb on the vga console" * tag 'for_linus-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/kgdb: tty/console: fix warnings in drivers/tty/serial/kgdboc.c kdb,vt_console: Fix missed data due to pager overruns kdb: Fix dmesg/bta scroll to quit with 'q' kgdboc: Accept either kbd or kdb to activate the vga + keyboard kdb shell kgdb,x86: fix warning about unused variable mips,kgdb: fix recursive page fault with CONFIG_KPROBES kgdb: Add module event hooks
2012-10-13vfs: define struct filename and have getname() return itJeff Layton2-4/+4
getname() is intended to copy pathname strings from userspace into a kernel buffer. The result is just a string in kernel space. It would however be quite helpful to be able to attach some ancillary info to the string. For instance, we could attach some audit-related info to reduce the amount of audit-related processing needed. When auditing is enabled, we could also call getname() on the string more than once and not need to recopy it from userspace. This patchset converts the getname()/putname() interfaces to return a struct instead of a string. For now, the struct just tracks the string in kernel space and the original userland pointer for it. Later, we'll add other information to the struct as it becomes convenient. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-10-12mips,kgdb: fix recursive page fault with CONFIG_KPROBESJason Wessel1-0/+9
This fault was detected using the kgdb test suite on boot and it crashes recursively due to the fact that CONFIG_KPROBES on mips adds an extra die notifier in the page fault handler. The crash signature looks like this: kgdbts:RUN bad memory access test KGDB: re-enter exception: ALL breakpoints killed Call Trace: [<807b7548>] dump_stack+0x20/0x54 [<807b7548>] dump_stack+0x20/0x54 The fix for now is to have kgdb return immediately if the fault type is DIE_PAGE_FAULT and allow the kprobe code to decide what is supposed to happen. Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: David S. Miller <davem@davemloft.net> Cc: <stable@vger.kernel.org> Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2012-10-12Merge branch 'for-linus' of ↵Linus Torvalds1-3/+0
git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal Pull pile 2 of execve and kernel_thread unification work from Al Viro: "Stuff in there: kernel_thread/kernel_execve/sys_execve conversions for several more architectures plus assorted signal fixes and cleanups. There'll be more (in particular, real fixes for the alpha do_notify_resume() irq mess)..." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal: (43 commits) alpha: don't open-code trace_report_syscall_{enter,exit} Uninclude linux/freezer.h m32r: trim masks avr32: trim masks tile: don't bother with SIGTRAP in setup_frame microblaze: don't bother with SIGTRAP in setup_rt_frame() mn10300: don't bother with SIGTRAP in setup_frame() frv: no need to raise SIGTRAP in setup_frame() x86: get rid of duplicate code in case of CONFIG_VM86 unicore32: remove pointless test h8300: trim _TIF_WORK_MASK parisc: decide whether to go to slow path (tracesys) based on thread flags parisc: don't bother looping in do_signal() parisc: fix double restarts bury the rest of TIF_IRET sanitize tsk_is_polling() bury _TIF_RESTORE_SIGMASK unicore32: unobfuscate _TIF_WORK_MASK mips: NOTIFY_RESUME is not needed in TIF masks mips: merge the identical "return from syscall" per-ABI code ... Conflicts: arch/arm/include/asm/thread_info.h
2012-10-11Merge tag 'disintegrate-mips-20121009' of ↵Ralf Baechle46-1706/+1846
git://git.infradead.org/users/dhowells/linux-headers into mips-for-linux-next UAPI Disintegration 2012-10-09 Patchwork: https://patchwork.linux-mips.org/patch/4414/
2012-10-11MIPS: SNI: Switch RM400 serial to SCCNXP driverThomas Bogendoerfer1-24/+3
The new SCCNXP driver supports the SC2681 chips used in RM400 machines. We now use the new driver instead of the old SC26xx driver. Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/4417/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-10-11MIPS: Remove unused empty_bad_pmd_table[] declaration.Ralf Baechle1-1/+0
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-10-11MIPS: MT: Remove kspd.Ralf Baechle5-462/+0
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-10-11MIPS: Malta: Fix section mismatch.Ralf Baechle1-1/+2
LD arch/mips/pci/built-in.o WARNING: arch/mips/pci/built-in.o(.devinit.text+0x2a0): Section mismatch in reference from the function malta_piix_func0_fixup() to the variable .init.data:pci_irq The function __devinit malta_piix_func0_fixup() references a variable __initdata pci_irq. If pci_irq is only used by malta_piix_func0_fixup then annotate pci_irq with a matching annotation. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-10-11MIPS: asm-offset.c: Delete unused irq_cpustat_t struct offsets.Ralf Baechle1-10/+0
Originally added in 05b541489c48e7fbeec19a92acf8683230750d0a [Merge with Linux 2.5.5.] over 10 years ago but never been used. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-10-11MIPS: Alchemy: Merge PB1100/1500 support into DB1000 code.Manuel Lauss8-678/+95
The PB1100/1500 are similar to their DB-cousins but with a few more devices on the bus. This patch adds PB1100/1500 support to the existing DB1100/1500 code. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Cc: lnux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/4338/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-10-11MIPS: Alchemy: merge PB1550 support into DB1550 codeManuel Lauss6-437/+161
The PB1550 is more or less a DB1550 without the PCI IDE controller, a more complicated (read: configurable) Flash setup and some other minor changes. Like the DB1550 it can be automatically detected by reading the CPLD ID register bits. This patch adds PB1550 detection and setup to the DB1550 code. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/4337/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-10-11MIPS: Alchemy: Single kernel for DB1200/1300/1550Manuel Lauss13-941/+548
Combine support for the DB1200/PB1200, DB1300 and DB1550 boards into a single kernel image. defconfig-generated image verified on DB1200, DB1300 and DB1550. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/4335/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-10-11MIPS: Optimize TLB refill for RI/XI configurations.David Daney1-16/+7
We don't have to do a separate shift to eliminate the software bits, just rotate them into the fill and they will be ignored. Signed-off-by: David Daney <ddaney@caviumnetworks.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/4294/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-10-11MIPS: proc: Cleanup printing of ASEs.Ralf Baechle1-9/+11
The number of %s was just getting ridiculous. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-10-11MIPS: Hardwire detection of DSP ASE Rev 2 for systems, as required.Ralf Baechle19-0/+20
Most supported systems currently hardwire cpu_has_dsp to 0, so we also can disable support for cpu_has_dsp2 resulting in a slightly smaller kernel. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-10-11MIPS: Add detection of DSP ASE Revision 2.Steven J. Hill5-2/+11
[ralf@linux-mips.org: This patch really only detects the ASE and passes its existence on to userland via /proc/cpuinfo. The DSP ASE Rev 2. adds new resources but no resources that would need management by the kernel.] Signed-off-by: Steven J. Hill <sjhill@mips.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/4165/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-10-11MIPS: Optimize pgd_init and pmd_initDavid Daney1-10/+10
On a dual issue processor GCC generates code that saves a couple of clock cycles per loop if we rearrange things slightly. Checking for p != end saves a SLTU per loop, moving the increment to the middle can let it dual issue on multi-issue processors. Signed-off-by: David Daney <ddaney@caviumnetworks.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/4249/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-10-11MIPS: perf: Add perf functionality for BMIPS5000Al Cooper1-1/+102
Add hardware performance counter support to kernel "perf" code for BMIPS5000. The BMIPS5000 performance counters are similar to MIPS MTI cores, so the changes were mostly made in perf_event_mipsxx.c which is typically for MTI cores. Signed-off-by: Al Cooper <alcooperx@gmail.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/4109/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-10-11MIPS: perf: Split the Kconfig option CONFIG_MIPS_MT_SMPAl Cooper2-8/+12
Split the Kconfig option CONFIG_MIPS_MT_SMP into CONFIG_MIPS_MT_SMP and CONFIG_MIPS_PERF_SHARED_TC_COUNTERS so some of the code used for performance counters that are shared between threads can be used for MIPS cores that are not MT_SMP. Signed-off-by: Al Cooper <alcooperx@gmail.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/4108/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-10-11MIPS: perf: Remove unnecessary #ifdefAl Cooper1-5/+0
The #ifdef for CONFIG_HW_PERF_EVENTS is not needed because the Makefile will only compile the module if this config option is set. This means that the code under #else would never be compiled. This may have been done to leave the original broken code around for reference, but the FIXME comment above the code already shows the broken code. Signed-off-by: Al Cooper <alcooperx@gmail.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/4107/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-10-11MIPS: perf: Add cpu feature bit for PCI (performance counter interrupt)Al Cooper5-3/+13
The PCI (Program Counter Interrupt) bit in the "cause" register is mandatory for MIPS32R2 cores, but has also been added to some R1 cores (BMIPS5000). This change adds a cpu feature bit to make it easier to check for and use this feature. Signed-off-by: Al Cooper <alcooperx@gmail.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/4106/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-10-11MIPS: perf: Change the "mips_perf_event" table unsupported indicator.Al Cooper1-150/+4
Change the indicator from 0xffffffff in the "event_id" member to zero in the "cntr_mask" member. This removes the need to initialize entries that are unsupported. This also solves a problem where the number of entries in the table was increased based on a globel enum used for all platforms, but the new unsupported entries were not added for mips. This was leaving new table entries of all zeros that we not marked UNSUPPORTED. Signed-off-by: Al Cooper <alcooperx@gmail.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/4110/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-10-11MIPS: Align swapper_pg_dir to 64K for better TLB Refill code.David Daney2-10/+28
We can save an instruction in the TLB Refill path for kernel mappings by aligning swapper_pg_dir on a 64K boundary. The address of swapper_pg_dir can be generated with a single LUI instead of LUI/{D}ADDUI. The alignment of __init_end is bumped up to 64K so there are no holes between it and swapper_pg_dir, which is placed at the very beginning of .bss. The alignment of invalid_pmd_table and invalid_pte_table can be relaxed to PAGE_SIZE. We do this by using __page_aligned_bss, which has the added benefit of eliminating alignment holes in .bss. Signed-off-by: David Daney <david.daney@cavium.com> Cc: linux-mips@linux-mips.org Cc: linux-arch@vger.kernel.org, Cc: linux-kernel@vger.kernel.org Acked-by: Arnd Bergmann <arnd@arndb.de> Patchwork: https://patchwork.linux-mips.org/patch/4220/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-10-11Improve atomic.h robustnessJoshua Kinard1-35/+29
I've maintained this patch, originally from Thiemo Seufer in 2004, for a really long time, but I think it's time for it to get a look at for possible inclusion. I have had no problems with it across various SGI systems over the years. To quote the post here: http://www.linux-mips.org/archives/linux-mips/2004-12/msg00000.html "the atomic functions use so far memory references for the inline assembler to access the semaphore. This can lead to additional instructions in the ll/sc loop, because newer compilers don't expand the memory reference any more but leave it to the assembler. The appended patch uses registers instead, and makes the ll/sc arguments more explicit. In some cases it will lead also to better register scheduling because the register isn't bound to an output any more." Signed-off-by: Joshua Kinard <kumba@gentoo.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/4029/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-10-10Merge tag 'for-3.7-rc1' of git://gitorious.org/linux-pwm/linux-pwmLinus Torvalds10-320/+125
Pull pwm changes from Thierry Reding: "All legacy PWM providers have now been moved to the PWM subsystem. The plan for 3.8 is to adapt all board files to provide a lookup table for PWM devices in order to get rid of the global namespace. Subsequently, users of the legacy pwm_request() and pwm_free() functions can be migrated to the new pwm_get() and pwm_put() functions. Once this has been completed, the legacy API and the compatibility code in the core can be removed. In addition to the above, these changes also add support for configuring the polarity of a PWM signal (currently only supported on ECAP and EHRPWM) and include a much needed rework of the i.MX driver. Managed functions to obtain and release a PWM device (devm_pwm_get() and devm_pwm_put()) have been added and the pwm-backlight driver has been updated to use them. If the PWM subsystem hasn't been enabled, dummy functions are provided that allow the subsystem to safely compile out. Some common checks on input parameters have been moved to the core and removed from the drivers. Finally, a small fix corrects the description of the PWM specifier's second cell in the device tree representation." * tag 'for-3.7-rc1' of git://gitorious.org/linux-pwm/linux-pwm: (23 commits) pwm: dt: Fix description of second PWM cell pwm: Check for negative duty-cycle and period pwm: Add Ingenic JZ4740 support MIPS: JZ4740: Export timer API pwm: Move PUV3 PWM driver to PWM framework unicore32: pwm: Use managed resource allocations unicore32: pwm: Remove unnecessary indirection unicore32: pwm: Use module_platform_driver() unicore32: pwm: Properly remap memory-mapped registers pwm-backlight: Use devm_pwm_get() instead of pwm_get() pwm: Move AB8500 PWM driver to PWM framework pwm: Fix compilation error when CONFIG_PWM is not defined pwm: i.MX: fix clock lookup pwm: i.MX: use per clock unconditionally pwm: i.MX: add devicetree support pwm: i.MX: Use module_platform_driver pwm: i.MX: add functions to enable/disable pwm. pwm: i.MX: remove unnecessary if in pwm_[en|dis]able pwm: i.MX: factor out SoC specific functions pwm: pwm-tiehrpwm: Add support for configuring polarity of PWM ...
2012-10-09Merge tag 'disintegrate-mtd-20121009' of ↵David Woodhouse224-3150/+48447
git://git.infradead.org/users/dhowells/linux-headers UAPI Disintegration 2012-10-09 Conflicts: MAINTAINERS arch/arm/configs/bcmring_defconfig arch/arm/mach-imx/clk-imx51-imx53.c drivers/mtd/nand/Kconfig drivers/mtd/nand/bcm_umi_nand.c drivers/mtd/nand/nand_bcm_umi.h drivers/mtd/nand/orion_nand.c
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-20 02:40:23 +0300