summaryrefslogtreecommitdiff
path: root/arch/mips
AgeCommit message (Collapse)AuthorFilesLines
2015-10-23MIPS: CPS: #ifdef on CONFIG_MIPS_MT_SMP rather than CONFIG_MIPS_MTPaul Burton1-4/+4
commit 7a63076d9a31a6c2073da45021eeb4f89d2a8b56 upstream. The CONFIG_MIPS_MT symbol can be selected by CONFIG_MIPS_VPE_LOADER in addition to CONFIG_MIPS_MT_SMP. We only want MT code in the CPS SMP boot vector if we're using MT for SMP. Thus switch the config symbol we ifdef against to CONFIG_MIPS_MT_SMP. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Markos Chandras <markos.chandras@imgtec.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/10867/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-23MIPS: CPS: Don't include MT code in non-MT kernels.Paul Burton1-0/+2
commit a5b0f6db0e6cf6224e50f6585e9c8f0c2d38a8f8 upstream. The MT-specific code in mips_cps_boot_vpes can safely be omitted from kernels which don't support MT, with the default VPE==0 case being used as it would be after the has_mt (Config3.MT) check failed at runtime. Discarding the code entirely will save us a few bytes & allow cleaner handling of MT ASE instructions by later patches. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Markos Chandras <markos.chandras@imgtec.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/10866/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-23MIPS: CPS: Stop dangling delay slot from has_mt.Paul Burton1-2/+2
commit 1e5fb282f8eda889776ee83f9214d5df9edaa26d upstream. The has_mt macro ended with a branch, leaving its callers with a delay slot that would be executed if Config3.MT is not set. However it would not be executed if Config3 (or earlier Config registers) don't exist which makes it somewhat inconsistent at best. Fill the delay slot in the macro & fix the mips_cps_boot_vpes caller appropriately. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Markos Chandras <markos.chandras@imgtec.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/10865/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-23MIPS: dma-default: Fix 32-bit fall back to GFP_DMAJames Hogan1-1/+1
commit 53960059d56ecef67d4ddd546731623641a3d2d1 upstream. If there is a DMA zone (usually 24bit = 16MB I believe), but no DMA32 zone, as is the case for some 32-bit kernels, then massage_gfp_flags() will cause DMA memory allocated for devices with a 32..63-bit coherent_dma_mask to fall back to using __GFP_DMA, even though there may only be 32-bits of physical address available anyway. Correct that case to compare against a mask the size of phys_addr_t instead of always using a 64-bit mask. Signed-off-by: James Hogan <james.hogan@imgtec.com> Fixes: a2e715a86c6d ("MIPS: DMA: Fix computation of DMA flags from device's coherent_dma_mask.") Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/9610/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-23MIPS: BPF: Fix build on pre-R2 little endian CPUsAurelien Jarno1-0/+42
commit b259e51f2e29390518021f9b8df55a3de42f371b upstream. The rotr, seh and wsbh instructions have been introduced with the R2 ISA. Thus the current BPF code fails to build on pre-R2 little endian CPUs: CC arch/mips/net/bpf_jit.o AS arch/mips/net/bpf_jit_asm.o /home/aurel32/linux-4.2/arch/mips/net/bpf_jit_asm.S: Assembler messages: /home/aurel32/linux-4.2/arch/mips/net/bpf_jit_asm.S:67: Error: opcode not supported on this processor: mips32 (mips32) `wsbh $8,$19' /home/aurel32/linux-4.2/arch/mips/net/bpf_jit_asm.S:68: Error: opcode not supported on this processor: mips32 (mips32) `rotr $19,$8,16' /home/aurel32/linux-4.2/arch/mips/net/bpf_jit_asm.S:83: Error: opcode not supported on this processor: mips32 (mips32) `wsbh $8,$19' /home/aurel32/linux-4.2/arch/mips/net/bpf_jit_asm.S:84: Error: opcode not supported on this processor: mips32 (mips32) `seh $19,$8' /home/aurel32/linux-4.2/arch/mips/net/bpf_jit_asm.S:151: Error: opcode not supported on this processor: mips32 (mips32) `wsbh $8,$12' /home/aurel32/linux-4.2/arch/mips/net/bpf_jit_asm.S:153: Error: opcode not supported on this processor: mips32 (mips32) `rotr $19,$8,16' /home/aurel32/linux-4.2/arch/mips/net/bpf_jit_asm.S:164: Error: opcode not supported on this processor: mips32 (mips32) `wsbh $19,$12' /home/aurel32/linux-4.2/scripts/Makefile.build:294: recipe for target 'arch/mips/net/bpf_jit_asm.o' failed Fix that by providing equivalent code for these CPUs. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> Reviewed-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/11098/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-23MIPS: BPF: Avoid unreachable code on little endianAurelien Jarno1-3/+5
commit faa9724a674e5e52316bb0d173aed16bd17d536c upstream. On little endian, avoid generating the big endian version of the code by using #else in addition to #ifdef #endif. Also fix one alignment issue wrt delay slot. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> Reviewed-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/11097/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-23MIPS: bootmem: Fix mapstart calculation for contiguous mapsAlexander Sverdlin1-1/+9
commit 88d3426942d748b90b051b7ef2d5d765f5f3054c upstream. Commit a6335fa1 fixed the case with gap between initrd and next usable PFN zone, but broken the case when initrd is combined with usable memory into one region (in add_memory_region()). Restore the fixup initially brought in by f9a7febd. ---- error message ---- Unpacking initramfs... Initramfs unpacking failed: junk in compressed archive BUG: Bad page state in process swapper pfn:00261 page:81004c20 count:0 mapcount:-127 mapping: (null) index:0x2 flags: 0x0() page dumped because: nonzero mapcount CPU: 0 PID: 1 Comm: swapper Not tainted 4.2.0+ #1782 ----------------------- Signed-off-by: Alexander Sverdlin <alexander.sverdlin@gmail.com> Reported-by: Tony Wu <tung7970@gmail.com> Tested-by: Tony Wu <tung7970@gmail.com> Cc: David Daney <david.daney@cavium.com> Cc: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com> Cc: Huacai Chen <chenhc@lemote.com> Cc: Joe Perches <joe@perches.com> Cc: Steven J. Hill <Steven.Hill@imgtec.com> Cc: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/11086/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-23MIPS: Fix console output for Fulong2e systemGuenter Roeck1-0/+3
commit fc2ca674470bbfe11d72a20a3f19fd3dc43bfca0 upstream. Commit 3adeb2566b9b ("MIPS: Loongson: Improve LEFI firmware interface") made the number of UARTs dynamic if LEFI_FIRMWARE_INTERFACE is configured. Unfortunately, it did not initialize the number of UARTs if LEFI_FIRMWARE_INTERFACE is not configured. As a result, the Fulong2e system has no console. Fixes: 3adeb2566b9b ("MIPS: Loongson: Improve LEFI firmware interface") Acked-by: Huacai Chen <chenhc@lemote.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/11076/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-29lib/decompressors: use real out buf size for gunzip with kernelYinghai Lu1-2/+2
commit 2d3862d26e67a59340ba1cf1748196c76c5787de upstream. When loading x86 64bit kernel above 4GiB with patched grub2, got kernel gunzip error. | early console in decompress_kernel | decompress_kernel: | input: [0x807f2143b4-0x807ff61aee] | output: [0x807cc00000-0x807f3ea29b] 0x027ea29c: output_len | boot via startup_64 | KASLR using RDTSC... | new output: [0x46fe000000-0x470138cfff] 0x0338d000: output_run_size | decompress: [0x46fe000000-0x47007ea29b] <=== [0x807f2143b4-0x807ff61aee] | | Decompressing Linux... gz... | | uncompression error | | -- System halted the new buffer is at 0x46fe000000ULL, decompressor_gzip is using 0xffffffb901ffffff as out_len. gunzip in lib/zlib_inflate/inflate.c cap that len to 0x01ffffff and decompress fails later. We could hit this problem with crashkernel booting that uses kexec loading kernel above 4GiB. We have decompress_* support: 1. inbuf[]/outbuf[] for kernel preboot. 2. inbuf[]/flush() for initramfs 3. fill()/flush() for initrd. This bug only affect kernel preboot path that use outbuf[]. Add __decompress and take real out_buf_len for gunzip instead of guessing wrong buf size. Fixes: 1431574a1c4 (lib/decompressors: fix "no limit" output buffer length) Signed-off-by: Yinghai Lu <yinghai@kernel.org> Cc: Alexandre Courbot <acourbot@nvidia.com> Cc: Jon Medhurst <tixy@linaro.org> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-29MIPS: math-emu: Emulate missing BC1{EQ,NE}Z instructionsMarkos Chandras1-1/+19
commit c909ca718e8f50cf484ef06a8dd935e738e8e53d upstream. Commit c8a34581ec09 ("MIPS: Emulate the BC1{EQ,NE}Z FPU instructions") added support for emulating the new R6 BC1{EQ,NE}Z branches but it missed the case where the instruction that caused the exception was not on a DS. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Fixes: c8a34581ec09 ("MIPS: Emulate the BC1{EQ,NE}Z FPU instructions") Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/10738/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-29MIPS: math-emu: Allow m{f,t}hc emulation on MIPS R6Markos Chandras1-2/+2
commit e8f80cc1a6d80587136b015e989a12827e1fcfe5 upstream. The mfhc/mthc instructions are supported on MIPS R6 so emulate them if needed. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/10737/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-29MIPS: CPS: use 32b accesses to GCRsPaul Burton1-2/+2
commit 90996511187d6282db6d02d3f97006b4dbb5c457 upstream. Commit b677bc03d757 ("MIPS: cps-vec: Use macros for various arithmetics and memory operations") replaced various load & store instructions through cps-vec.S with the PTR_L & PTR_S macros. However it was somewhat overzealous in doing so for CM GCR accesses, since the bit width of the CM doesn't necessarily match that of the CPU. The registers accessed (GCR_CL_COHERENCE & GCR_CL_ID) should be safe to simply always access using 32b instructions, so do so in order to avoid issues when using a 32b CM with a 64b CPU. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: James Hogan <james.hogan@imgtec.com> Patchwork: https://patchwork.linux-mips.org/patch/10864/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-18MIPS: Fix LLVM build issue.Ralf Baechle1-1/+1
Matthew Fortune <Matthew.Fortune@imgtec.com> reports: The genex.S file appears to mix the case of a macro between its definition and use. A cut down example of this is below. The macro __build_clear_none has lower case 'build' but ends up being instantiated with upper case BUILD. Can this be fixed on master. It has been picked up by the LLVM integrated assembler which is currently case sensitive. We are likely to fix the assembler as well but the code is currently inconsistent in the kernel. .macro __build_clear_none .endm .macro __BUILD_HANDLER exception handler clear verbose ext .align 5 .globl handle_\exception; .align 2; .type handle_\exception, @function; .ent handle_\exception, 0; handle_\exception: .frame $29, 184, $29 .set noat .globl handle_\exception\ext; .type handle_\exception\ext, @function; handle_\exception\ext: __BUILD_clear_\clear .endm .macro BUILD_HANDLER exception handler clear verbose __BUILD_HANDLER \exception \handler \clear \verbose _int .endm BUILD_HANDLER ftlb ftlb none silent Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Reported-by: Matthew Fortune <Matthew.Fortune@imgtec.com>
2015-08-16MIPS: Fix seccomp syscall argument for MIPS64Markos Chandras2-2/+2
Commit 4c21b8fd8f14 ("MIPS: seccomp: Handle indirect system calls (o32)") fixed indirect system calls on O32 but it also introduced a bug for MIPS64 where it erroneously modified the v0 (syscall) register with the assumption that the sycall offset hasn't been taken into consideration. This breaks seccomp on MIPS64 n64 and n32 ABIs. We fix this by replacing the addition with a move instruction. Fixes: 4c21b8fd8f14 ("MIPS: seccomp: Handle indirect system calls (o32)") Cc: <stable@vger.kernel.org> # 3.15+ Reviewed-by: James Hogan <james.hogan@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/10951/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-08-09Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds29-60/+128
Pull MIPS fixes from Ralf Baechle: "Another round of MIPS fixes for 4.2. No area does particularly stand out but we have a two unpleasant ones: - Kernel ptes are marked with a global bit which allows the kernel to share kernel TLB entries between all processes. For this to work both entries of an adjacent even/odd pte pair need to have the global bit set. There has been a subtle race in setting the other entry's global bit since ~ 2000 but it take particularly pathological workloads that essentially do mostly vmalloc/vfree to trigger this. This pull request fixes the 64-bit case but leaves the case of 32 bit CPUs with 64 bit ptes unsolved for now. The unfixed cases affect hardware that is not available in the field yet. - Instruction emulation requires loading instructions from user space but the current fast but simplistic approach will fail on pages that are PROT_EXEC but !PROT_READ. For this reason we temporarily do not permit this permission and will map pages with PROT_EXEC | PROT_READ. The remainder of this pull request is more or less across the field and the short log explains them well" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: MIPS: Make set_pte() SMP safe. MIPS: Replace add and sub instructions in relocate_kernel.S with addiu MIPS: Flush RPS on kernel entry with EVA Revert "MIPS: BCM63xx: Provide a plat_post_dma_flush hook" MIPS: BMIPS: Delete unused Kconfig symbol MIPS: Export get_c0_perfcount_int() MIPS: show_stack: Fix stack trace with EVA MIPS: do_mcheck: Fix kernel code dump with EVA MIPS: SMP: Don't increment irq_count multiple times for call function IPIs MIPS: Partially disable RIXI support. MIPS: Handle page faults of executable but unreadable pages correctly. MIPS: Malta: Don't reinitialise RTC MIPS: unaligned: Fix build error on big endian R6 kernels MIPS: Fix sched_getaffinity with MT FPAFF enabled MIPS: Fix build with CONFIG_OF=y for non OF-enabled targets CPUFREQ: Loongson2: Fix broken build due to incorrect include.
2015-08-07signal: fix information leak in copy_siginfo_from_user32Amanieu d'Antras1-2/+0
This function can leak kernel stack data when the user siginfo_t has a positive si_code value. The top 16 bits of si_code descibe which fields in the siginfo_t union are active, but they are treated inconsistently between copy_siginfo_from_user32, copy_siginfo_to_user32 and copy_siginfo_to_user. copy_siginfo_from_user32 is called from rt_sigqueueinfo and rt_tgsigqueueinfo in which the user has full control overthe top 16 bits of si_code. This fixes the following information leaks: x86: 8 bytes leaked when sending a signal from a 32-bit process to itself. This leak grows to 16 bytes if the process uses x32. (si_code = __SI_CHLD) x86: 100 bytes leaked when sending a signal from a 32-bit process to a 64-bit process. (si_code = -1) sparc: 4 bytes leaked when sending a signal from a 32-bit process to a 64-bit process. (si_code = any) parsic and s390 have similar bugs, but they are not vulnerable because rt_[tg]sigqueueinfo have checks that prevent sending a positive si_code to a different process. These bugs are also fixed for consistency. Signed-off-by: Amanieu d'Antras <amanieu@gmail.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Chris Metcalf <cmetcalf@ezchip.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-08-05MIPS: Make set_pte() SMP safe.David Daney1-0/+31
On MIPS the GLOBAL bit of the PTE must have the same value in any aligned pair of PTEs. These pairs of PTEs are referred to as "buddies". In a SMP system is is possible for two CPUs to be calling set_pte() on adjacent PTEs at the same time. There is a race between setting the PTE and a different CPU setting the GLOBAL bit in its buddy PTE. This race can be observed when multiple CPUs are executing vmap()/vfree() at the same time. Make setting the buddy PTE's GLOBAL bit an atomic operation to close the race condition. The case of CONFIG_64BIT_PHYS_ADDR && CONFIG_CPU_MIPS32 is *not* handled. Signed-off-by: David Daney <david.daney@cavium.com> Cc: <stable@vger.kernel.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/10835/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-08-03MIPS: Replace add and sub instructions in relocate_kernel.S with addiuJames Cowgill1-4/+4
Fixes the assembler errors generated when compiling a MIPS R6 kernel with CONFIG_KEXEC on, by replacing the offending add and sub instructions with addiu instructions. Build errors: arch/mips/kernel/relocate_kernel.S: Assembler messages: arch/mips/kernel/relocate_kernel.S:27: Error: invalid operands `dadd $16,$16,8' arch/mips/kernel/relocate_kernel.S:64: Error: invalid operands `dadd $20,$20,8' arch/mips/kernel/relocate_kernel.S:65: Error: invalid operands `dadd $18,$18,8' arch/mips/kernel/relocate_kernel.S:66: Error: invalid operands `dsub $22,$22,1' scripts/Makefile.build:294: recipe for target 'arch/mips/kernel/relocate_kernel.o' failed Signed-off-by: James Cowgill <James.Cowgill@imgtec.com> Cc: <stable@vger.kernel.org> # 4.0+ Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/10558/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-08-03MIPS: Flush RPS on kernel entry with EVAJames Hogan1-0/+25
When EVA is enabled, flush the Return Prediction Stack (RPS) present on some MIPS cores on entry to the kernel from user mode. This is important specifically for interAptiv with EVA enabled, otherwise kernel mode RPS mispredicts may trigger speculative fetches of user return addresses, which may be sensitive in the kernel address space due to EVA's overlapping user/kernel address spaces. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Markos Chandras <markos.chandras@imgtec.com> Cc: Leonid Yegoshin <leonid.yegoshin@imgtec.com> Cc: linux-mips@linux-mips.org Cc: <stable@vger.kernel.org> # 3.15.x- Patchwork: https://patchwork.linux-mips.org/patch/10812/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-08-03Revert "MIPS: BCM63xx: Provide a plat_post_dma_flush hook"Florian Fainelli1-10/+0
This reverts commit 3cf29543413207d3ab1c3f62a88c09bb46f2264e ("MIPS: BCM63xx: Provide a plat_post_dma_flush hook") since this commit was found to prevent BCM6358 (early BMIPS4350 cores) and some BCM6368 (BMIPS4380 cores) from booting reliably. Alvaro was able to track this down to an issue specifically located to devices that use the second thread (TP1) when booting. Since BCM63xx did not have a need for plat_post_dma_flush() hook before, let's just keep things the way they were. Reported-by: Álvaro Fernández Rojas <noltari@gmail.com> Reported-by: Jonas Gorski <jogo@openwrt.org> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Cc: stable@vger.kernel.org Cc: Kevin Cernekee <cernekee@gmail.com> Cc: Nicolas Schichan <nschichan@freebox.fr> Cc: linux-mips@linux-mips.org Cc: blogic@openwrt.org Cc: noltari@gmail.com Cc: jogo@openwrt.org Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: stable@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/10804/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-08-03MIPS: BMIPS: Delete unused Kconfig symbolKevin Cernekee1-1/+0
This was left over from an earlier iteration of the BMIPS irqchip changes. It doesn't actually have an effect, so let's nuke it. Reported-by: Valentin Rothberg <valentinrothberg@gmail.com> Signed-off-by: Kevin Cernekee <cernekee@chromium.org> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Cc: stable@vger.kernel.org # v4.1+ Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/9910/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-08-03MIPS: Export get_c0_perfcount_int()Felix Fietkau6-0/+6
get_c0_perfcount_int is tested from oprofile code. If oprofile is compiled as module, get_c0_perfcount_int needs to be exported, otherwise it cannot be resolved. Fixes: a669efc4a3b4 ("MIPS: Add hook to get C0 performance counter interrupt") Cc: stable@vger.kernel.org # v3.19+ Signed-off-by: Felix Fietkau <nbd@openwrt.org> Cc: linux-mips@linux-mips.org Cc: abrestic@chromium.org Patchwork: https://patchwork.linux-mips.org/patch/10763/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-08-03MIPS: show_stack: Fix stack trace with EVAJames Hogan1-0/+7
The show_stack() function deals exclusively with kernel contexts, but if it gets called in user context with EVA enabled, show_stacktrace() will attempt to access the stack using EVA accesses, which will either read other user mapped data, or more likely cause an exception which will be handled by __get_user(). This is easily reproduced using SysRq t to show all task states, which results in the following stack dump output: Stack : (Bad stack address) Fix by setting the current user access mode to kernel around the call to show_stacktrace(). This causes __get_user() to use normal loads to read the kernel stack. Now we get the correct output, like this: Stack : 00000000 80168960 00000000 004a0000 00000000 00000000 8060016c 1f3abd0c 1f172cd8 8056f09c 7ff1e450 8014fc3c 00000001 806dd0b0 0000001d 00000002 1f17c6a0 1f17c804 1f17c6a0 8066f6e0 00000000 0000000a 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 0110e800 1f3abd6c 1f17c6a0 ... Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Markos Chandras <markos.chandras@imgtec.com> Cc: Leonid Yegoshin <leonid.yegoshin@imgtec.com> Cc: linux-mips@linux-mips.org Cc: <stable@vger.kernel.org> # 3.15+ Patchwork: https://patchwork.linux-mips.org/patch/10778/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-08-03MIPS: do_mcheck: Fix kernel code dump with EVAJames Hogan1-0/+6
If a machine check exception is raised in kernel mode, user context, with EVA enabled, then the do_mcheck handler will attempt to read the code around the EPC using EVA load instructions, i.e. as if the reads were from user mode. This will either read random user data if the process has anything mapped at the same address, or it will cause an exception which is handled by __get_user, resulting in this output: Code: (Bad address in epc) Fix by setting the current user access mode to kernel if the saved register context indicates the exception was taken in kernel mode. This causes __get_user to use normal loads to read the kernel code. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Markos Chandras <markos.chandras@imgtec.com> Cc: Leonid Yegoshin <leonid.yegoshin@imgtec.com> Cc: linux-mips@linux-mips.org Cc: <stable@vger.kernel.org> # 3.15+ Patchwork: https://patchwork.linux-mips.org/patch/10777/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-08-03MIPS: SMP: Don't increment irq_count multiple times for call function IPIsAlex Smith13-30/+29
The majority of SMP platforms handle their IPIs through do_IRQ() which calls irq_{enter/exit}(). When a call function IPI is received, smp_call_function_interrupt() is called which also calls irq_{enter,exit}(), meaning irq_count is raised twice. When tick broadcasting is used (which is implemented via a call function IPI), this incorrectly causes all CPU idle time on the core receiving broadcast ticks to be accounted as time spent servicing IRQs, as account_process_tick() will account as such if irq_count is greater than 1. This results in 100% CPU usage being reported on a core which receives its ticks via broadcast. This patch removes the SMP smp_call_function_interrupt() wrapper which calls irq_{enter,exit}(). Platforms which handle their IPIs through do_IRQ() now call generic_smp_call_function_interrupt() directly to avoid incrementing irq_count a second time. Platforms which don't (loongson, sgi-ip27, sibyte) call generic_smp_call_function_interrupt() wrapped in irq_{enter,exit}(). Signed-off-by: Alex Smith <alex.smith@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/10770/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-08-03MIPS: Partially disable RIXI support.Ralf Baechle1-4/+4
Execution of break instruction, trap instructions, emulation of unaligned loads or floating point instructions - anything that tries to read the instruction's opcode from userspace - needs read access to a page. RIXI (Read Inhibit / Execute Inhibit) support however allows the creation of pags that are executable but not readable. On such a mapping the attempted load of the opcode by the kernel is going to cause an endless loop of page faults. The quick workaround for this is to disable the combinations that the kernel currently isn't able to handle which are executable mappings. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-08-03MIPS: Handle page faults of executable but unreadable pages correctly.Ralf Baechle1-1/+2
Without this we end taking execeptions in an endless loop hanging the thread. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-08-03MIPS: Malta: Don't reinitialise RTCJames Hogan1-6/+9
On Malta, since commit a87ea88d8f6c ("MIPS: Malta: initialise the RTC at boot"), the RTC is reinitialised and forced into binary coded decimal (BCD) mode during init, even if the bootloader has already initialised it, and may even have already put it into binary mode (as YAMON does). This corrupts the current time, can result in the RTC seconds being an invalid BCD (e.g. 0x1a..0x1f) for up to 6 seconds, as well as confusing YAMON for a while after reset, enough for it to report timeouts when attempting to load from TFTP (it actually uses the RTC in that code). Therefore only initialise the RTC to the extent that is necessary so that Linux avoids interfering with the bootloader setup, while also allowing it to estimate the CPU frequency without hanging, without a bootloader necessarily having done anything with the RTC (for example when the kernel is loaded via EJTAG). The divider control is configured for a 32KHZ reference clock if necessary, and the SET bit of the RTC_CONTROL register is cleared if necessary without changing any other bits (this bit will be set when coming out of reset if the battery has been disconnected). Fixes: a87ea88d8f6c ("MIPS: Malta: initialise the RTC at boot") Signed-off-by: James Hogan <james.hogan@imgtec.com> Reviewed-by: Paul Burton <paul.burton@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Maciej W. Rozycki <macro@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: <stable@vger.kernel.org> # 3.14+ Patchwork: https://patchwork.linux-mips.org/patch/10739/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-08-03MIPS: unaligned: Fix build error on big endian R6 kernelsJames Cowgill1-1/+1
Commit eeb538950367 ("MIPS: unaligned: Prevent EVA instructions on kernel unaligned accesses") renamed the Load* and Store* defines in unaligned.c to _Load* and _Store* as part of its fix. One define was missed out which causes big endian R6 kernels to fail to build. arch/mips/kernel/unaligned.c:880:35: error: implicit declaration of function '_StoreDW' #define StoreDW(addr, value, res) _StoreDW(addr, value, res) ^ Signed-off-by: James Cowgill <James.Cowgill@imgtec.com> Fixes: eeb538950367 ("MIPS: unaligned: Prevent EVA instructions on kernel unaligned accesses") Cc: Markos Chandras <markos.chandras@imgtec.com> Cc: <stable@vger.kernel.org> # 4.0+ Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/10575/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-08-03MIPS: Fix sched_getaffinity with MT FPAFF enabledFelix Fietkau1-2/+3
p->thread.user_cpus_allowed is zero-initialized and is only filled on the first sched_setaffinity call. To avoid adding overhead in the task initialization codepath, simply OR the returned mask in sched_getaffinity with p->cpus_allowed. Cc: stable@vger.kernel.org Signed-off-by: Felix Fietkau <nbd@openwrt.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/10740/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-08-03MIPS: Fix build with CONFIG_OF=y for non OF-enabled targetsJonas Gorski1-1/+1
Commit 01306aeadd75 ("MIPS: prepare for user enabling of CONFIG_OF") changed the guards in asm/prom.h from CONFIG_OF to CONFIG_USE_OF, but missed the actual function declarations in kernel/prom.c, which have additional dependencies. Fixes the following build error: CC arch/mips/kernel/prom.o arch/mips/kernel/prom.c: In function '__dt_setup_arch': arch/mips/kernel/prom.c:54:2: error: implicit declaration of function 'early_init_dt_scan' [-Werror=implicit-function-declaration] if (!early_init_dt_scan(bph)) ^ Fixes: 01306aeadd75 ("MIPS: prepare for user enabling of CONFIG_OF") Signed-off-by: Jonas Gorski <jogo@openwrt.org> Acked-by: Rob Herring <robh@kernel.org> Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Cc: Grant Likely <grant.likely@linaro.org> Patchwork: https://patchwork.linux-mips.org/patch/10741/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-07-20Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds9-29/+7
Pull MIPS fixes from Ralf Baechle: "Another round of MIPS fixes for 4.2. Things are looking quite decent at this stage but the recent work on the FPU support took its toll: - fix an incorrect overly restrictive ifdef - select O32 64-bit FP support for O32 binary compatibility - remove workarounds for Sibyte SB1250 Pass1 parts. There are rare fixing the workarounds is not worth the effort. - patch up an outdated and now incorrect comment" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: MIPS: fpu.h: Allow 64-bit FPU on a 64-bit MIPS R6 CPU MIPS: SB1: Remove support for Pass 1 parts. MIPS: Require O32 FP64 support for MIPS64 with O32 compat MIPS: asm-offset.c: Patch up various comments refering to the old filename.
2015-07-19MIPS: fpu.h: Allow 64-bit FPU on a 64-bit MIPS R6 CPUMarkos Chandras1-1/+1
Commit 6134d94923d0 ("MIPS: asm: fpu: Allow 64-bit FPU on MIPS32 R6") added support for 64-bit FPU on a 32-bit MIPS R6 processor but it missed the 64-bit CPU case leading to FPU failures when requesting FR=1 mode (which is always the case for MIPS R6 userland) when running a 32-bit kernel on a 64-bit CPU. We also fix the MIPS R2 case. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Fixes: 6134d94923d0 ("MIPS: asm: fpu: Allow 64-bit FPU on MIPS32 R6") Reviewed-by: Paul Burton <paul.burton@imgtec.com> Cc: <stable@vger.kernel.org> # 4.0+ Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/10734/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-07-18mm: clean up per architecture MM hook header filesLaurent Dufour2-15/+1
Commit 2ae416b142b6 ("mm: new mm hook framework") introduced an empty header file (mm-arch-hooks.h) for every architecture, even those which doesn't need to define mm hooks. As suggested by Geert Uytterhoeven, this could be cleaned through the use of a generic header file included via each per architecture asm/include/Kbuild file. The PowerPC architecture is not impacted here since this architecture has to defined the arch_remap MM hook. Signed-off-by: Laurent Dufour <ldufour@linux.vnet.ibm.com> Suggested-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Vineet Gupta <vgupta@synopsys.com> Cc: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-07-14MIPS: SB1: Remove support for Pass 1 parts.Ralf Baechle6-25/+2
Pass 1 parts had a number of significant erratas and were only available in small numbers and under NDA. Full support also required the use of a special toolchain that kept branches properly aligned. These workarounds were never upstreamed and the only toolchain known to have them is Montavista's GCC 3.0-based toolchain which completly obsoleted if not useless these days. So now that automated testing has tripped over the user of the -msb1-pass1-workarounds option, rather than fixing it remove support for pass 1 parts. Probably nobody will notice. I seem to own the last know pass 1 board and I haven't noticed another one in the wild in the past decade, at least. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-07-14MIPS: Require O32 FP64 support for MIPS64 with O32 compatPaul Burton1-0/+1
MIPS32r6 code requires FP64 (ie. FR=1) support. Building a kernel with support for MIPS32r6 binaries but without support for O32 with FP64 is therefore a problem which can lead to incorrectly executed userland. CONFIG_MIPS_O32_FP64_SUPPORT is already selected when the kernel is configured for MIPS32r6, but not when the kernel is configured for MIPS64r6 with O32 compat support. Select CONFIG_MIPS_O32_FP64_SUPPORT in such configurations to prevent building kernels which execute MIPS32r6 userland incorrectly. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Markos Chandras <markos.chandras@imgtec.com> Cc: <stable@vger.kernel.org> # v4.0- Cc: linux-mips@linux-mips.org Cc: Matthew Fortune <matthew.fortune@imgtec.com> Cc: stable@vger.kernel.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/10674/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-07-14MIPS: asm-offset.c: Patch up various comments refering to the old filename.Ralf Baechle2-3/+3
arch/mips/tools/offset.c was renamed to arch/mips/kernel/asm-offsets.c for v2.6.14. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-07-10MIPS: O32: Use compat_sys_getsockopt.Ralf Baechle1-1/+1
We were using the native syscall and that results in subtle breakage. This is the same issue as fixed in 077d0e65618f27b2199d622e12ada6d8f3dbd862 (MIPS: N32: Use compat getsockopt syscall) but that commit did fix it only for N32. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Link: https://bugzilla.kernel.org/show_bug.cgi?id=100291
2015-07-10MIPS: c-r4k: Extend way_string arrayPaul Burton1-1/+3
The L2 cache in the I6400 core has 16 ways, so extend the way_string array to take such caches into account. [ralf@linux-mips.org: Other already supported CPUs are free to support more than 8 ways of cache as well.] Signed-off-by: Paul Burton <paul.burton@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/10640/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-07-10MIPS: Pistachio: Support CDMM & Fast Debug ChannelJames Hogan2-1/+12
Implement the mips_cdmm_phys_base() platform callback to provide a default Common Device Memory Map (CDMM) physical base address for the Pistachio SoC. This allows the CDMM in each VPE to be configured and probed for devices, such as the Fast Debug Channel (FDC). The physical address chosen is just below the default CPC address, which appears to also be unallocated. The FDC IRQ is also usable on Pistachio, and is routed through the GIC, so implement the get_c0_fdc_int() platform callback using gic_get_c0_fdc_int(), so the FDC driver doesn't have to fall back to polling. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Andrew Bresticker <abrestic@chromium.org> Cc: James Hartley <james.hartley@imgtec.com> Cc: linux-mips@linux-mips.org Reviewed-by: Andrew Bresticker <abrestic@chromium.org> Patchwork: http://patchwork.linux-mips.org/patch/9749/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-07-10MIPS: Malta: Make GIC FDC IRQ workaround Malta specificJames Hogan1-7/+13
Wider testing reveals that the Fast Debug Channel (FDC) interrupt is routed through the GIC just fine on Pistachio SoC, even though it contains interAptiv cores. Clearly the FDC interrupt routing problems previously observed on interAptiv and proAptiv cores are specific to the Malta FPGA bitstreams. Move the workaround for interAptiv and proAptiv out of gic_get_c0_fdc_int() in the GIC irqchip driver into Malta's get_c0_fdc_int() platform callback, to allow the Pistachio SoC to use the FDC interrupt. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Andrew Bresticker <abrestic@chromium.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: linux-mips@linux-mips.org Reviewed-by: Andrew Bresticker <abrestic@chromium.org> Cc: James Hartley <james.hartley@imgtec.com> Patchwork: http://patchwork.linux-mips.org/patch/9748/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-07-10MIPS: c-r4k: Fix cache flushing for MT coresMarkos Chandras3-4/+55
MT_SMP is not the only SMP option for MT cores. The MT_SMP option allows more than one VPE per core to appear as a secondary CPU in the system. Because of how CM works, it propagates the address-based cache ops to the secondary cores but not the index-based ones. Because of that, the code does not use IPIs to flush the L1 caches on secondary cores because the CM would have done that already. However, the CM functionality is independent of the type of SMP kernel so even in non-MT kernels, IPIs are not necessary. As a result of which, we change the conditional to depend on the CM presence. Moreover, since VPEs on the same core share the same L1 caches, there is no need to send an IPI on all of them so we calculate a suitable cpumask with only one VPE per core. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: <stable@vger.kernel.org> # 3.15+ Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/10654/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-07-09Revert "MIPS: Kconfig: Disable SMP/CPS for 64-bit"Markos Chandras1-1/+1
This reverts commit 6ca716f2e5571d25a3899c6c5c91ff72ea6d6f5e. SMP/CPS is now supported on 64bit cores. Cc: <stable@vger.kernel.org> # 4.1 Reviewed-by: Paul Burton <paul.burton@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Cc: stable@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/10592/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-07-09MIPS: cps-vec: Use macros for various arithmetics and memory operationsMarkos Chandras1-16/+16
Replace lw/sw and various arithmetic instructions with macros so the code can work on 64-bit kernels as well. Cc: <stable@vger.kernel.org> # 3.16+ Reviewed-by: Paul Burton <paul.burton@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Cc: stable@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/10591/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-07-09MIPS: kernel: cps-vec: Replace KSEG0 with CKSEG0Markos Chandras1-2/+2
In preparation for 64-bit CPS support, we replace KSEG0 with CKSEG0 so 64-bit kernels can be supported. Cc: <stable@vger.kernel.org> # 3.16+ Reviewed-by: Paul Burton <paul.burton@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Cc: stable@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/10590/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-07-09MIPS: kernel: cps-vec: Use ta0-ta3 pseudo-registers for 64-bitMarkos Chandras1-21/+21
The cps-vec code assumes O32 ABI and uses t4-t7 in quite a few places. This breaks the build on 64-bit. As a result of which, use the pseudo-registers ta0-ta3 to make the code compatible with 64-bit. Cc: <stable@vger.kernel.org> # 3.16+ Reviewed-by: Paul Burton <paul.burton@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Cc: stable@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/10589/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-07-09MIPS: kernel: cps-vec: Replace mips32r2 ISA level with mips64r2Markos Chandras1-2/+2
mips32r2 is a subset of mips64r2, so we replace mips32r2 with mips64r2 in preparation for 64-bit CPS support. Cc: <stable@vger.kernel.org> # 3.16+ Reviewed-by: Paul Burton <paul.burton@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Cc: stable@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/10588/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-07-09MIPS: kernel: cps-vec: Replace 'la' macro with PTR_LAMarkos Chandras1-10/+10
The PTR_LA macro will pick the correct "la" or "dla" macro to load an address to a register. This gets rids of the following warnings (and others) when building a 64-bit CPS kernel: arch/mips/kernel/cps-vec.S:63: Warning: la used to load 64-bit address arch/mips/kernel/cps-vec.S:159: Warning: la used to load 64-bit address arch/mips/kernel/cps-vec.S:220: Warning: la used to load 64-bit address arch/mips/kernel/cps-vec.S:240: Warning: la used to load 64-bit address [...] Cc: <stable@vger.kernel.org> # 3.16+ Reviewed-by: Paul Burton <paul.burton@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Cc: stable@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/10587/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-07-09MIPS: kernel: smp-cps: Fix 64-bit compatibility errors due to pointer castingMarkos Chandras1-3/+3
Commit 1d8f1f5a780a ("MIPS: smp-cps: hotplug support") added hotplug support in the SMP/CPS implementation but it introduced a few build problems on 64-bit kernels due to pointer being casted to and from 'int' C types. We fix this problem by using 'unsigned long' instead which should match the size of the pointers in 32/64-bit kernels. Finally, we fix the comment since the CM base address is loaded to v1($3) instead of v0. Fixes the following build problems: arch/mips/kernel/smp-cps.c: In function 'wait_for_sibling_halt': arch/mips/kernel/smp-cps.c:366:17: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast] [...] arch/mips/kernel/smp-cps.c: In function 'cps_cpu_die': arch/mips/kernel/smp-cps.c:427:13: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast] cc1: all warnings being treated as errors Fixes: 1d8f1f5a780a ("MIPS: smp-cps: hotplug support") Cc: <stable@vger.kernel.org> # 3.16+ Reviewed-by: Paul Burton <paul.burton@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Cc: stable@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/10586/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-07-09MIPS: Fix erroneous JR emulation for MIPS R6Markos Chandras1-1/+1
Commit 5f9f41c474befb4ebbc40b27f65bb7d649241581 ("MIPS: kernel: Prepare the JR instruction for emulation on MIPS R6") added support for emulating the JR instruction on MIPS R6 cores but that introduced a bug which could be triggered when hitting a JALR opcode because the code used the wrong field in the 'r_format' struct to determine the instruction opcode. This lead to crashes because an emulated JALR instruction was treated as a JR one when the R6 emulator was turned off. Fixes: 5f9f41c474be ("MIPS: kernel: Prepare the JR instruction for emulation on MIPS R6") Cc: <stable@vger.kernel.org> # 4.0+ Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Cc: stable@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/10583/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
generated by cgit v1.2.3 (git 2.39.0) at 2026-01-23 09:10:56 +0300