summaryrefslogtreecommitdiff
path: root/arch/mips
AgeCommit message (Collapse)AuthorFilesLines
2014-11-19MIPS: jump_label.c: Handle the microMIPS J instruction encodingMaciej W. Rozycki2-10/+38
Implement the microMIPS encoding of the J instruction for the purpose of the static keys feature, fixing a crash early on in bootstrap as the kernel is unhappy seeing the ISA bit set in jump table entries. Make sure the ISA bit correctly reflects the instruction encoding chosen for the kernel, 0 for the standard MIPS and 1 for the microMIPS encoding. Also make sure the instruction to patch is a 32-bit NOP in the microMIPS mode as by default the 16-bit short encoding is assumed Signed-off-by: Maciej W. Rozycki <macro@codesourcery.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/8516/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-19MIPS: jump_label.c: Correct the span of the J instructionMaciej W. Rozycki1-2/+2
Correct the check for the span of the 256MB segment addressable by the J instruction according to this instruction's semantics. The calculation of the jump target is applied to the address of the delay-slot instruction that immediately follows. Adjust the check accordingly by adding 4 to `e->code' that holds the address of the J instruction itself. Signed-off-by: Maciej W. Rozycki <macro@codesourcery.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/8515/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-19MIPS: Zero variable read by get_user / __get_user in case of an error.Ralf Baechle1-1/+4
This wasn't happening in all cases. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-19MIPS: lib: memcpy: Restore NOP on delay slot before returning to callerMarkos Chandras1-0/+1
Commit cf62a8b8134dd3 ("MIPS: lib: memcpy: Use macro to build the copy_user code") switched to a macro in order to build the memcpy symbols in preparation for the EVA support. However, this commit also removed the NOP instruction after the 'jr ra' when returning back to the caller. This had no visible side-effects since the next instruction was a load to the t0 register which was already in the clobbered list, but it may have undesired effects in the future if some other code is introduced in between the .Ldone and the .Ll_exc_copy labels. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: <stable@vger.kernel.org> # v3.15+ Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/8512/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-19MIPS: tlb-r4k: Add missing HTW stop/start sequencesMarkos Chandras1-0/+4
HTW needs to stop and start again whenever the EntryHI register changes otherwise an inflight HTW operation might use the new EntryHI register for updating an old entry and that could lead to crashes or even a machine check exception. We fix this by ensuring the HTW has stop whenever the EntryHI register is about to change Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: <stable@vger.kernel.org> # v3.17+ Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/8511/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-19MIPS: asm: uaccess: Add v1 register to clobber list on EVAMarkos Chandras1-3/+4
When EVA is turned on and prefetching is being used in memcpy.S, the v1 register is being used as a helper register to the PREFE instruction. However, v1 ($3) was not in the clobber list, which means that the compiler did not preserve it across function calls, and that could corrupt the value of the register leading to all sorts of userland crashes. We fix this problem by using the DADDI_SCRATCH macro to define the clobbered register when CONFIG_EVA && CONFIG_CPU_HAS_PREFETCH are enabled. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: <stable@vger.kernel.org> # v3.15+ Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/8510/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-19MIPS: oprofile: Fix backtrace on 64-bit kernelAaro Koskinen1-1/+1
Fix incorrect cast that always results in wrong address for the new frame on 64-bit kernels. Signed-off-by: Aaro Koskinen <aaro.koskinen@nsn.com> Cc: stable@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/8110/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-19MIPS: Loongson: Set Loongson-3's ISA level to MIPS64R1Huacai Chen2-3/+4
In CPU manual Loongson-3 is MIPS64R2 compatible, but during tests we found that its EI/DI instructions have problems. So we just set the ISA level to MIPS64R1. Signed-off-by: Huacai Chen <chenhc@lemote.com> Cc: John Crispin <john@phrozen.org> Cc: Steven J. Hill <Steven.Hill@imgtec.com> Cc: linux-mips@linux-mips.org Cc: Fuxin Zhang <zhangfx@lemote.com> Cc: Zhangjin Wu <wuzhangjin@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/8320/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-19MIPS: Loongson: Fix the write-combine CCA value settingHuacai Chen1-1/+1
All Loongson-2/3 processors support _CACHE_UNCACHED_ACCELERATED, not only Loongson-3A. Signed-off-by: Huacai Chen <chenhc@lemote.com> Cc: John Crispin <john@phrozen.org> Cc: Steven J. Hill <Steven.Hill@imgtec.com> Cc: linux-mips@linux-mips.org Cc: Fuxin Zhang <zhangfx@lemote.com> Cc: Zhangjin Wu <wuzhangjin@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/8319/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-19MIPS: IP27: Fix __node_distances undefined errorJames Cowgill1-0/+1
export the __node_distances symbol in the ip27 memory code to fix the build error: Building modules, stage 2. MODPOST 311 modules ERROR: "__node_distances" [drivers/block/nvme.ko] undefined! scripts/Makefile.modpost:90: recipe for target '__modpost' failed when building the kernel with: CONFIG_SGI_IP27=y CONFIG_BLK_DEV_NVME=m Signed-off-by: James Cowgill <James.Cowgill@imgtec.com> Cc: <stable@vger.kernel.org> # v3.15+ Reviewed-by: James Hogan <james.hogan@imgtec.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-19MIPS: Loongson3: Fix __node_distances undefined errorJames Cowgill1-0/+1
export the __node_distances symbol in the loongson3 numa code to fix the build error: Building modules, stage 2. MODPOST 221 modules ERROR: "__node_distances" [drivers/block/nvme.ko] undefined! scripts/Makefile.modpost:90: recipe for target '__modpost' failed when building the kernel with: CONFIG_CPU_LOONGSON3=y CONFIG_NUMA=y CONFIG_BLK_DEV_NVME=m Signed-off-by: James Cowgill <James.Cowgill@imgtec.com> Cc: <stable@vger.kernel.org> # v3.17+ Reviewed-by: James Hogan <james.hogan@imgtec.com> Reviewed-by: Huacai Chen <chenhc@lemote.com> Cc: linux-mips@linux-mips.org Cc: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Patchwork: https://patchwork.linux-mips.org/patch/8444/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-07MIPS: Fix build with binutils 2.24.51+Manuel Lauss14-17/+118
Starting with version 2.24.51.20140728 MIPS binutils complain loudly about mixing soft-float and hard-float object files, leading to this build failure since GCC is invoked with "-msoft-float" on MIPS: {standard input}: Warning: .gnu_attribute 4,3 requires `softfloat' LD arch/mips/alchemy/common/built-in.o mipsel-softfloat-linux-gnu-ld: Warning: arch/mips/alchemy/common/built-in.o uses -msoft-float (set by arch/mips/alchemy/common/prom.o), arch/mips/alchemy/common/sleeper.o uses -mhard-float To fix this, we detect if GAS is new enough to support "-msoft-float" command option, and if it does, we can let GCC pass it to GAS; but then we also need to sprinkle the files which make use of floating point registers with the necessary ".set hardfloat" directives. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Cc: Linux-MIPS <linux-mips@linux-mips.org> Cc: Matthew Fortune <Matthew.Fortune@imgtec.com> Cc: Markos Chandras <Markos.Chandras@imgtec.com> Cc: Maciej W. Rozycki <macro@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/8355/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-06MIPS: R3000: Fix debug output for Virtual page numberIsamu Mogi1-2/+2
Virtual page number of R3000 in entryhi is 20 bit from MSB. But in dump_tlb(), the bit mask to read it from entryhi is 19 bit (0xffffe000). The patch fixes that to 0xfffff000. Signed-off-by: Isamu Mogi <isamu@leafytree.jp> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/8290/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-04MIPS: Fix strnlen_user() return value in case of overlong strings.Ralf Baechle1-2/+4
We were returning maxlen like the userland strnlen if no '\0' character was encountered while the kernel version is expected to return a value larger than maxlen. Fixed to return maxlen + 1. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-10-29MIPS: CMA: Do not reserve memory if not requiredZubair Lutfullah Kakakhel1-1/+2
Even if CMA is disabled, the for_each_memblock macro expands to run reserve_bootmem once. Hence, reserve_bootmem attempts to reserve location 0 of size 0. Add a check to avoid that. Issue was highlighted during testing with EVA enabled. resrve_bootmem used to exit gracefully when passed arguments to reserve 0 size location at 0 without EVA. But with EVA enabled, macros would point to different addresses and the code would trigger a BUG. Signed-off-by: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com> Tested-by: Markos Chandras <markos.chandras@imgtec.com> Tested-by: Huacai Chen <chenhc@lemote.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/8231/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-10-27MIPS: Wire up bpf syscall.Ralf Baechle5-6/+13
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-10-27MIPS/Xlp: Remove the dead function destroy_irq() to fix build errorYijing Wang1-3/+1
Commit 465665f78a7 ("mips: Kill pointless destroy_irq()") removed the destroy_irq(). So remove the leftover one in xlp_setup_msix() to fix build error. arch/mips/pci/msi-xlp.c: In function 'xlp_setup_msix': arch/mips/pci/msi-xlp.c:447:3: error: implicit declaration of function 'destroy_irq'.. cc1: some warnings being treated as errors make[1]: *** [arch/mips/pci/msi-xlp.o] Error 1 make: *** [arch/mips/pci/] Error 2 Signed-off-by: Yijing Wang <wangyijing@huawei.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: linux-pci@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: Xinwei Hu <huxinwei@huawei.com> Cc: Wuyun <wuyun.wu@huawei.com> Cc: linux-arm-kernel@lists.infradead.org Cc: Russell King <linux@arm.linux.org.uk> Cc: linux-arch@vger.kernel.org Cc: arnab.basu@freescale.com Cc: Bharat.Bhushan@freescale.com Cc: x86@kernel.org Cc: Arnd Bergmann <arnd@arndb.de> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: xen-devel@lists.xenproject.org Cc: Joerg Roedel <joro@8bytes.org> Cc: iommu@lists.linux-foundation.org Cc: linux-mips@linux-mips.org Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: linuxppc-dev@lists.ozlabs.org Cc: linux-s390@vger.kernel.org Cc: Sebastian Ott <sebott@linux.vnet.ibm.com> Cc: Tony Luck <tony.luck@intel.com> Cc: linux-ia64@vger.kernel.org Cc: David S. Miller <davem@davemloft.net> Cc: sparclinux@vger.kernel.org Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: David Vrabel <david.vrabel@citrix.com> Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Cc: Liviu Dudau <liviu@dudau.co.uk> Patchwork: https://patchwork.linux-mips.org/patch/8087/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-10-27MIPS: Octeon: Make Octeon GPIO IRQ chip CPU hotplug-awareAlexander Sverdlin1-0/+2
Make Octeon GPIO IRQ chip CPU hotplug-aware Seems that irq_cpu_offline callbacks were forgotten in v1 and v2 CIU GPIO chips. There is such a callback for octeon_irq_chip_ciu2_gpio, covering CIU2 chips. Without this callback GPIO IRQs are not being migrated during core offlining. Patch is tested on Octeon II. Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nsn.com> Cc: David Daney <ddaney.cavm@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/8201/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-10-24MIPS: SEAD3: Fix I2C device registration.Ralf Baechle1-7/+1
This isn't a module and shouldn't be one. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-10-24MIPS: SEAD3: Nuke PIC32 I2C driver.Ralf Baechle3-526/+0
A platform driver for which nothing ever registers the corresponding platform device. Also it was driving the same hardware as sead3-i2c-drv.c so redundant anyway and couldn't co-exist with that driver because each of them was using a private spinlock to protect access to the same hardware resources. This also fixes a randconfig problem: arch/mips/mti-sead3/sead3-pic32-i2c-drv.c: In function 'i2c_platform_probe': arch/mips/mti-sead3/sead3-pic32-i2c-drv.c:345:2: error: implicit declaration of function 'i2c_add_numbered_adapter' [-Werror=implicit-function-declaration] ret = i2c_add_numbered_adapter(&priv->adap); ^ arch/mips/mti-sead3/sead3-pic32-i2c-drv.c: In function 'i2c_platform_remove': arch/mips/mti-sead3/sead3-pic32-i2c-drv.c:361:2: error: implicit declaration of function 'i2c_del_adapter' [-Werror=implicit-function-declaration] i2c_del_adapter(&priv->adap); Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-10-24MIPS: ftrace: Fix a microMIPS build problemMarkos Chandras1-2/+2
Code before the .fixup section needs to have the .insn directive. This has no side effects on MIPS32/64 but it affects the way microMIPS loads the address for the return label. Fixes the following build problem: mips-linux-gnu-ld: arch/mips/built-in.o: .fixup+0x4a0: Unsupported jump between ISA modes; consider recompiling with interlinking enabled. mips-linux-gnu-ld: final link failed: Bad value Makefile:819: recipe for target 'vmlinux' failed The fix is similar to 1658f914ff91c3bf ("MIPS: microMIPS: Disable LL/SC and fix linker bug.") Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: stable@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/8117/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-10-24MIPS: MSP71xx: Fix build errorStefan Hengelein1-2/+2
When CONFIG_MIPS_MT_SMP is enabled, the following compilation error occurs: arch/mips/pmcs-msp71xx/msp_irq_cic.c:134: error: ‘irq’ undeclared This code clearly never saw a compiler. The surrounding code suggests, that 'd->irq' was intended, not 'irq'. This error was found with vampyr. Signed-off-by: Stefan Hengelein <stefan.hengelein@fau.de> Fixes: d7881fbdf866d7d0 ("MIPS: msp71xx: Convert to new irq_chip functions") Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/8116/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-10-23MIPS: Malta: Do not build the malta-amon.c file if CMP is not enabledMarkos Chandras1-1/+2
The malta-amon.c file provides functions to access the YAMON Monitoring interface to bring up secondary VPEs in case of SMP/CMP. As a result of which, there is no need to build it if CMP is not used. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Reviewed-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/7993/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-10-23MIPS: Prevent compiler warning from cop2_{save,restore}Paul Burton1-4/+4
The no-op cases of cop2_save & cop2_restore lead to the following warnings being emitted during build with recent versions of gcc (tested using gcc 4.8.3 from the Mentor Sourcery CodeBench 2014.05 toolchain): In file included from ./arch/mips/include/asm/switch_to.h:18:0, from kernel/sched/core.c:78: kernel/sched/core.c: In function 'finish_task_switch': include/asm-generic/current.h:6:45: warning: value computed is not used [-Wunused-value] #define get_current() (current_thread_info()->task) ^ ./arch/mips/include/asm/cop2.h:48:32: note: in definition of macro 'cop2_restore' #define cop2_restore(r) do { (r); } while (0) ^ include/asm-generic/current.h:7:17: note: in expansion of macro 'get_current' #define current get_current() ^ ./arch/mips/include/asm/switch_to.h:114:16: note: in expansion of macro 'current' cop2_restore(current); \ ^ kernel/sched/core.c:2225:2: note: in expansion of macro 'finish_arch_switch' finish_arch_switch(prev); ^ Avoid the warning by "using" the value by casting to void. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/7880/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-10-23MIPS: Kconfig: Add missing MIPS_CPS dependencies to PM and cpuidleMarkos Chandras1-0/+1
The MIPS_CPS_PM and MIPS_CPS_CPUIDLE implementation should depend on the MIPS_CPS symbol to avoid the following build problem arch/mips/kernel/pm-cps.c: In function 'cps_pm_enter_state': arch/mips/kernel/pm-cps.c:164:26: error: 'cpu_coherent_mask' undeclared (first use in this function) cpumask_clear_cpu(cpu, &cpu_coherent_mask); ^ Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/7798/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-10-23MIPS: idle: Remove leftover __pastwait symbol and its referencesMarkos Chandras2-10/+0
The __pastwait symbol was only used by the address_is_in_r4k_wait_irqoff function but this is no longer used since the SMTC removal in commit b633648c5ad3 ('MIPS: MT: Remove SMTC support'). That symbol also led to build failures under certain random configuration due to the way the compiler compiled the r4k_wait_irqoff function. If that function was called multiple times, the __pastwait symbol was redefined breaking the build like this: CHK include/generated/compile.h CC arch/mips/kernel/idle.o {standard input}: Assembler messages: {standard input}:527: Error: symbol `__pastwait' is already defined Link: http://www.linux-mips.org/cgi-bin/mesg.cgi?a=linux-mips&i=1244879922.24479.30.camel%40falcon Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Cc: Markos Chandras <markos.chandras@imgtec.com> Patchwork: https://patchwork.linux-mips.org/patch/7791/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-10-23MIPS: Sibyte: Include the swarm subdir to the sb1250 LittleSur buildsMarkos Chandras1-0/+1
Fixes the following randconfig build problem: arch/mips/built-in.o: In function `show_cpuinfo': proc.c:(.text+0xde84): undefined reference to `get_system_type' arch/mips/built-in.o: In function `sb1250_setup': (.init.text+0x428): undefined reference to `get_system_type' arch/mips/built-in.o: In function `setup_arch': (.init.text+0x178c): undefined reference to `plat_mem_setup' Makefile:930: recipe for target 'vmlinux' failed Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/8106/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-10-23MIPS: ptrace.h: Add a missing includeAaro Koskinen1-0/+2
Commit a79ebea62010 (MIPS: ptrace: Fix user pt_regs definition, use in ptrace_{get, set}regs()) converted struct pt_regs to use __u64. Some userspace applications (e.g. GDB) include this file directly, and fail to see this type. Fix by including <linux/types.h>. The patch fixes the following build failure with GDB 7.8 when using GLIBC headers created against Linux 3.17: In file included from /home/aaro/los/work/shared/gdb-7.8/gdb/mips-linux-nat.c:37:0: /home/aaro/los/work/mips/rootfs/mips-linux-gnu/usr/include/asm/ptrace.h:32:2: error: unknown type name '__u64' __u64 regs[32]; ^ /home/aaro/los/work/mips/rootfs/mips-linux-gnu/usr/include/asm/ptrace.h:35:2: error: unknown type name '__u64' __u64 lo; ^ /home/aaro/los/work/mips/rootfs/mips-linux-gnu/usr/include/asm/ptrace.h:36:2: error: unknown type name '__u64' __u64 hi; ^ Fixes: a79ebea62010 ("MIPS: ptrace: Fix user pt_regs definition, use in ptrace_{get, set}regs()") Cc: stable@vger.kernel.org # 3.17 Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Alex Smith <alex@alex-smith.me.uk> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/8067/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-10-23MIPS: ath79: Fix compilation error when CONFIG_PCI is disabledStefan Hengelein1-1/+1
When CONFIG_PCI is disabled, 'db120_pci_init()' had a different signature than when was enabled. Therefore, compilation failed when CONFIG_PCI was not present. arch/mips/ath79/mach-db120.c:132: error: too many arguments to function 'db120_pci_init' This error was found with vampyr. Signed-off-by: Stefan Hengelein <stefan.hengelein@fau.de> Reviewed-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: geert@linux-m68k.org Patchwork: https://patchwork.linux-mips.org/patch/8119/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-10-23MIPS: MSP71xx: Remove compilation error when CONFIG_MIPS_MT is presentStefan Hengelein1-0/+1
When CONFIG_MIPS_MT is defined, code is enabled that tries to call 'set_vi_handler()'. This function is declared in <asm/setup.h> but the header is never included. Therefore, the compilation breaks. arch/mips/pmcs-msp71xx/msp_irq.c:133: error: implicit declaration of function 'set_vi_handler' This error was found with vampyr. Signed-off-by: Stefan Hengelein <stefan.hengelein@fau.de> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: ryazanov.s.a@gmail.com Patchwork: https://patchwork.linux-mips.org/patch/8122/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-10-22MIPS: Octeon: Remove special case for simulator command line.David Daney1-9/+0
There is no reason to have the kernel to append commands when running under the simulator, the simulator is perfectly capable of supplying the necessary command line arguments. Furthermore, if the simulator needs something different than what is hard coded in the kernel, it cannot get it if the kernel overrides it. Fix/Simplify the whole thing by removing this bit. Signed-off-by: David Daney <david.daney@cavium.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/8152/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-10-22MIPS: tlbex: Properly fix HUGE TLB Refill exception handlerDavid Daney1-1/+5
In commit 8393c524a25609 (MIPS: tlbex: Fix a missing statement for HUGETLB), the TLB Refill handler was fixed so that non-OCTEON targets would work properly with huge pages. The change was incorrect in that it broke the OCTEON case. The problem is shown here: xxx0: df7a0000 ld k0,0(k1) . . . xxxc0: df610000 ld at,0(k1) xxxc4: 335a0ff0 andi k0,k0,0xff0 xxxc8: e825ffcd bbit1 at,0x5,0x0 xxxcc: 003ad82d daddu k1,at,k0 . . . In the non-octeon case there is a destructive test for the huge PTE bit, and then at 0, $k0 is reloaded (that is what the 8393c524a25609 patch added). In the octeon case, we modify k1 in the branch delay slot, but we never need k0 again, so the new load is not needed, but since k1 is modified, if we do the load, we load from a garbage location and then get a nested TLB Refill, which is seen in userspace as either SIGBUS or SIGSEGV (depending on the garbage). The real fix is to only do this reloading if it is needed, and never where it is harmful. Signed-off-by: David Daney <david.daney@cavium.com> Cc: Huacai Chen <chenhc@lemote.com> Cc: Fuxin Zhang <zhangfx@lemote.com> Cc: Zhangjin Wu <wuzhangjin@gmail.com> Cc: stable@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/8151/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-10-22MIPS: loongson2_cpufreq: Fix CPU clock rate setting mismergeAaro Koskinen1-2/+3
During 3.16 merge window, parts of the commit 8e8acb32960f (MIPS/loongson2_cpufreq: Fix CPU clock rate setting) seem to have been deleted probably due to a mismerge, and as a result cpufreq is broken again on Loongson2 boards in 3.16 and newer kernels. Fix by repeating the fix. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: stable@vger.kernel.org # 3.16 Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/7835/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-10-22pci: pci-lantiq: remove duplicate check on resourceVarka Bhadram1-6/+1
Sanity check on resource happening with devm_ioremap_resource() Signed-off-by: Varka Bhadram <varkab@cdac.in> Acked-by: John Crispin <blogic@openwrt.org> Cc: linux-mips@linux-mips.org Cc: Varka Bhadram <varkab@cdac.in> Patchwork: https://patchwork.linux-mips.org/patch/8199/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-10-21MIPS: Lasat: Add missing CONFIG_PROC_FS dependency to PICVUE_PROCMarkos Chandras1-1/+1
The picvue_proc.c file creates the /proc interface for the PICVUE LCD display driver. As a result of which, it needs to depend on the PROC_FS symbol to avoid build problems like the following one when CONFIG_PROC_FS is not enabled. arch/mips/lasat/picvue_proc.c:26:14: error: 'pvc_linename' defined but not used [-Werror=unused-variable] static char *pvc_linename[PVC_NLINES] = {"line1", "line2"}; ^ Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/8174/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-10-21MIPS: cp1emu: Fix ISA restrictions for cop1x_op instructionsMarkos Chandras1-2/+2
Commit 08a07904e1828 ("MIPS: math-emu: Remove most ifdefery") removed the #ifdef ISA conditions and switched to runtime detection. However, according to the instruction set manual, the cop1x_op instructions are available in >=MIPS32r2 as well. This fixes a problem on MIPS32r2 with the ntpd package which failed to execute with a SIGILL exit code due to the fact that a madd.d instruction was not being emulated. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Fixes: 08a07904e1828 ("MIPS: math-emu: Remove most ifdefery") Cc: <stable@vger.kernel.org> # v3.16+ Cc: linux-mips@linux-mips.org Reviewed-by: Paul Burton <paul.burton@imgtec.com> Reviewed-by: James Hogan <james.hogan@imgtec.com> Cc: Markos Chandras <markos.chandras@imgtec.com> Patchwork: https://patchwork.linux-mips.org/patch/8173/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-10-20Merge git://git.infradead.org/users/eparis/auditLinus Torvalds2-4/+2
Pull audit updates from Eric Paris: "So this change across a whole bunch of arches really solves one basic problem. We want to audit when seccomp is killing a process. seccomp hooks in before the audit syscall entry code. audit_syscall_entry took as an argument the arch of the given syscall. Since the arch is part of what makes a syscall number meaningful it's an important part of the record, but it isn't available when seccomp shoots the syscall... For most arch's we have a better way to get the arch (syscall_get_arch) So the solution was two fold: Implement syscall_get_arch() everywhere there is audit which didn't have it. Use syscall_get_arch() in the seccomp audit code. Having syscall_get_arch() everywhere meant it was a useless flag on the stack and we could get rid of it for the typical syscall entry. The other changes inside the audit system aren't grand, fixed some records that had invalid spaces. Better locking around the task comm field. Removing some dead functions and structs. Make some things static. Really minor stuff" * git://git.infradead.org/users/eparis/audit: (31 commits) audit: rename audit_log_remove_rule to disambiguate for trees audit: cull redundancy in audit_rule_change audit: WARN if audit_rule_change called illegally audit: put rule existence check in canonical order next: openrisc: Fix build audit: get comm using lock to avoid race in string printing audit: remove open_arg() function that is never used audit: correct AUDIT_GET_FEATURE return message type audit: set nlmsg_len for multicast messages. audit: use union for audit_field values since they are mutually exclusive audit: invalid op= values for rules audit: use atomic_t to simplify audit_serial() kernel/audit.c: use ARRAY_SIZE instead of sizeof/sizeof[0] audit: reduce scope of audit_log_fcaps audit: reduce scope of audit_net_id audit: arm64: Remove the audit arch argument to audit_syscall_entry arm64: audit: Add audit hook in syscall_trace_enter/exit() audit: x86: drop arch from __audit_syscall_entry() interface sparc: implement is_32bit_task sparc: properly conditionalize use of TIF_32BIT ...
2014-10-19Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds53-105/+270
Pull MIPS updates from Ralf Baechle: "This is the MIPS pull request for the next kernel: - Zubair's patch series adds CMA support for MIPS. Doing so it also touches ARM64 and x86. - remove the last instance of IRQF_DISABLED from arch/mips - updates to two of the MIPS defconfig files. - cleanup of how cache coherency bits are handled on MIPS and implement support for write-combining. - platform upgrades for Alchemy - move MIPS DTS files to arch/mips/boot/dts/" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (24 commits) MIPS: ralink: remove deprecated IRQF_DISABLED MIPS: pgtable.h: Implement the pgprot_writecombine function for MIPS MIPS: cpu-probe: Set the write-combine CCA value on per core basis MIPS: pgtable-bits: Define the CCA bit for WC writes on Ingenic cores MIPS: pgtable-bits: Move the CCA bits out of the core's ifdef blocks MIPS: DMA: Add cma support x86: use generic dma-contiguous.h arm64: use generic dma-contiguous.h asm-generic: Add dma-contiguous.h MIPS: BPF: Add new emit_long_instr macro MIPS: ralink: Move device-trees to arch/mips/boot/dts/ MIPS: Netlogic: Move device-trees to arch/mips/boot/dts/ MIPS: sead3: Move device-trees to arch/mips/boot/dts/ MIPS: Lantiq: Move device-trees to arch/mips/boot/dts/ MIPS: Octeon: Move device-trees to arch/mips/boot/dts/ MIPS: Add support for building device-tree binaries MIPS: Create common infrastructure for building built-in device-trees MIPS: SEAD3: Enable DEVTMPFS MIPS: SEAD3: Regenerate defconfigs MIPS: Alchemy: DB1300: Add touch penirq support ...
2014-10-15Merge branch 'for-3.18-consistent-ops' of ↵Linus Torvalds6-41/+41
git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu Pull percpu consistent-ops changes from Tejun Heo: "Way back, before the current percpu allocator was implemented, static and dynamic percpu memory areas were allocated and handled separately and had their own accessors. The distinction has been gone for many years now; however, the now duplicate two sets of accessors remained with the pointer based ones - this_cpu_*() - evolving various other operations over time. During the process, we also accumulated other inconsistent operations. This pull request contains Christoph's patches to clean up the duplicate accessor situation. __get_cpu_var() uses are replaced with with this_cpu_ptr() and __this_cpu_ptr() with raw_cpu_ptr(). Unfortunately, the former sometimes is tricky thanks to C being a bit messy with the distinction between lvalues and pointers, which led to a rather ugly solution for cpumask_var_t involving the introduction of this_cpu_cpumask_var_ptr(). This converts most of the uses but not all. Christoph will follow up with the remaining conversions in this merge window and hopefully remove the obsolete accessors" * 'for-3.18-consistent-ops' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu: (38 commits) irqchip: Properly fetch the per cpu offset percpu: Resolve ambiguities in __get_cpu_var/cpumask_var_t -fix ia64: sn_nodepda cannot be assigned to after this_cpu conversion. Use __this_cpu_write. percpu: Resolve ambiguities in __get_cpu_var/cpumask_var_t Revert "powerpc: Replace __get_cpu_var uses" percpu: Remove __this_cpu_ptr clocksource: Replace __this_cpu_ptr with raw_cpu_ptr sparc: Replace __get_cpu_var uses avr32: Replace __get_cpu_var with __this_cpu_write blackfin: Replace __get_cpu_var uses tile: Use this_cpu_ptr() for hardware counters tile: Replace __get_cpu_var uses powerpc: Replace __get_cpu_var uses alpha: Replace __get_cpu_var ia64: Replace __get_cpu_var uses s390: cio driver &__get_cpu_var replacements s390: Replace __get_cpu_var uses mips: Replace __get_cpu_var uses MIPS: Replace __get_cpu_var uses in FPU emulator. arm: Replace __this_cpu_ptr with raw_cpu_ptr ...
2014-10-14Merge branch 'x86-seccomp-for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 seccomp changes from Ingo Molnar: "This tree includes x86 seccomp filter speedups and related preparatory work, which touches core seccomp facilities as well. The main idea is to split seccomp into two phases, to be able to enter a simple fast path for syscalls with ptrace side effects. There's no substantial user-visible (and ABI) effects expected from this, except a change in how we emit a better audit record for SECCOMP_RET_TRACE events" * 'x86-seccomp-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86_64, entry: Use split-phase syscall_trace_enter for 64-bit syscalls x86_64, entry: Treat regs->ax the same in fastpath and slowpath syscalls x86: Split syscall_trace_enter into two phases x86, entry: Only call user_exit if TIF_NOHZ x86, x32, audit: Fix x32's AUDIT_ARCH wrt audit seccomp: Document two-phase seccomp and arch-provided seccomp_data seccomp: Allow arch code to provide seccomp_data seccomp: Refactor the filter callback and the API seccomp,x86,arm,mips,s390: Remove nr parameter from secure_computing
2014-10-13Merge branch 'sched-core-for-linus' of ↵Linus Torvalds1-6/+0
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler updates from Ingo Molnar: "The main changes in this cycle were: - Optimized support for Intel "Cluster-on-Die" (CoD) topologies (Dave Hansen) - Various sched/idle refinements for better idle handling (Nicolas Pitre, Daniel Lezcano, Chuansheng Liu, Vincent Guittot) - sched/numa updates and optimizations (Rik van Riel) - sysbench speedup (Vincent Guittot) - capacity calculation cleanups/refactoring (Vincent Guittot) - Various cleanups to thread group iteration (Oleg Nesterov) - Double-rq-lock removal optimization and various refactorings (Kirill Tkhai) - various sched/deadline fixes ... and lots of other changes" * 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (72 commits) sched/dl: Use dl_bw_of() under rcu_read_lock_sched() sched/fair: Delete resched_cpu() from idle_balance() sched, time: Fix build error with 64 bit cputime_t on 32 bit systems sched: Improve sysbench performance by fixing spurious active migration sched/x86: Fix up typo in topology detection x86, sched: Add new topology for multi-NUMA-node CPUs sched/rt: Use resched_curr() in task_tick_rt() sched: Use rq->rd in sched_setaffinity() under RCU read lock sched: cleanup: Rename 'out_unlock' to 'out_free_new_mask' sched: Use dl_bw_of() under RCU read lock sched/fair: Remove duplicate code from can_migrate_task() sched, mips, ia64: Remove __ARCH_WANT_UNLOCKED_CTXSW sched: print_rq(): Don't use tasklist_lock sched: normalize_rt_tasks(): Don't use _irqsave for tasklist_lock, use task_rq_lock() sched: Fix the task-group check in tg_has_rt_tasks() sched/fair: Leverage the idle state info when choosing the "idlest" cpu sched: Let the scheduler see CPU idle states sched/deadline: Fix inter- exclusive cpusets migrations sched/deadline: Clear dl_entity params when setscheduling to different class sched/numa: Kill the wrong/dead TASK_DEAD check in task_numa_fault() ...
2014-10-13Merge branch 'locking-arch-for-linus' of ↵Linus Torvalds1-372/+189
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull arch atomic cleanups from Ingo Molnar: "This is a series kept separate from the main locking tree, which cleans up and improves various details in the atomics type handling: - Remove the unused atomic_or_long() method - Consolidate and compress atomic ops implementations between architectures, to reduce linecount and to make it easier to add new ops. - Rewrite generic atomic support to only require cmpxchg() from an architecture - generate all other methods from that" * 'locking-arch-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits) locking,arch: Use ACCESS_ONCE() instead of cast to volatile in atomic_read() locking, mips: Fix atomics locking, sparc64: Fix atomics locking,arch: Rewrite generic atomic support locking,arch,xtensa: Fold atomic_ops locking,arch,sparc: Fold atomic_ops locking,arch,sh: Fold atomic_ops locking,arch,powerpc: Fold atomic_ops locking,arch,parisc: Fold atomic_ops locking,arch,mn10300: Fold atomic_ops locking,arch,mips: Fold atomic_ops locking,arch,metag: Fold atomic_ops locking,arch,m68k: Fold atomic_ops locking,arch,m32r: Fold atomic_ops locking,arch,ia64: Fold atomic_ops locking,arch,hexagon: Fold atomic_ops locking,arch,cris: Fold atomic_ops locking,arch,avr32: Fold atomic_ops locking,arch,arm64: Fold atomic_ops locking,arch,arm: Fold atomic_ops ...
2014-10-10Merge branch 'akpm' (fixes from Andrew Morton)Linus Torvalds2-8/+1
Merge patch-bomb from Andrew Morton: - part of OCFS2 (review is laggy again) - procfs - slab - all of MM - zram, zbud - various other random things: arch, filesystems. * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (164 commits) nosave: consolidate __nosave_{begin,end} in <asm/sections.h> include/linux/screen_info.h: remove unused ORIG_* macros kernel/sys.c: compat sysinfo syscall: fix undefined behavior kernel/sys.c: whitespace fixes acct: eliminate compile warning kernel/async.c: switch to pr_foo() include/linux/blkdev.h: use NULL instead of zero include/linux/kernel.h: deduplicate code implementing clamp* macros include/linux/kernel.h: rewrite min3, max3 and clamp using min and max alpha: use Kbuild logic to include <asm-generic/sections.h> frv: remove deprecated IRQF_DISABLED frv: remove unused cpuinfo_frv and friends to fix future build error zbud: avoid accessing last unused freelist zsmalloc: simplify init_zspage free obj linking mm/zsmalloc.c: correct comment for fullness group computation zram: use notify_free to account all free notifications zram: report maximum used memory zram: zram memory size limitation zsmalloc: change return value unit of zs_get_total_size_bytes zsmalloc: move pages_allocated to zs_pool ...
2014-10-10nosave: consolidate __nosave_{begin,end} in <asm/sections.h>Geert Uytterhoeven2-8/+1
The different architectures used their own (and different) declarations: extern __visible const void __nosave_begin, __nosave_end; extern const void __nosave_begin, __nosave_end; extern long __nosave_begin, __nosave_end; Consolidate them using the first variant in <asm/sections.h>. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Russell King <linux@arm.linux.org.uk> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-09Merge tag 'pci-v3.18-changes' of ↵Linus Torvalds1-4/+2
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "The interesting things here are: - Turn on Config Request Retry Status Software Visibility. This caused hangs last time, but we included a fix this time. - Rework PCI device configuration to use _HPP/_HPX more aggressively - Allow PCI devices to be put into D3cold during system suspend - Add arm64 PCI support - Add APM X-Gene host bridge driver - Add TI Keystone host bridge driver - Add Xilinx AXI host bridge driver More detailed summary: Enumeration - Check Vendor ID only for Config Request Retry Status (Rajat Jain) - Enable Config Request Retry Status when supported (Rajat Jain) - Add generic domain handling (Catalin Marinas) - Generate uppercase hex for modalias interface class (Ricardo Ribalda Delgado) Resource management - Add missing MEM_64 mask in pci_assign_unassigned_bridge_resources() (Yinghai Lu) - Increase IBM ipr SAS Crocodile BARs to at least system page size (Douglas Lehr) PCI device hotplug - Prevent NULL dereference during pciehp probe (Andreas Noever) - Move _HPP & _HPX handling into core (Bjorn Helgaas) - Apply _HPP to PCIe devices as well as PCI (Bjorn Helgaas) - Apply _HPP/_HPX to display devices (Bjorn Helgaas) - Preserve SERR & PARITY settings when applying _HPP/_HPX (Bjorn Helgaas) - Preserve MPS and MRRS settings when applying _HPP/_HPX (Bjorn Helgaas) - Apply _HPP/_HPX to all devices, not just hot-added ones (Bjorn Helgaas) - Fix wait time in pciehp timeout message (Yinghai Lu) - Add more pciehp Slot Control debug output (Yinghai Lu) - Stop disabling pciehp notifications during init (Yinghai Lu) MSI - Remove arch_msi_check_device() (Alexander Gordeev) - Rename pci_msi_check_device() to pci_msi_supported() (Alexander Gordeev) - Move D0 check into pci_msi_check_device() (Alexander Gordeev) - Remove unused kobject from struct msi_desc (Yijing Wang) - Remove "pos" from the struct msi_desc msi_attrib (Yijing Wang) - Add "msi_bus" sysfs MSI/MSI-X control for endpoints (Yijing Wang) - Use __get_cached_msi_msg() instead of get_cached_msi_msg() (Yijing Wang) - Use __read_msi_msg() instead of read_msi_msg() (Yijing Wang) - Use __write_msi_msg() instead of write_msi_msg() (Yijing Wang) Power management - Drop unused runtime PM support code for PCIe ports (Rafael J. Wysocki) - Allow PCI devices to be put into D3cold during system suspend (Rafael J. Wysocki) AER - Add additional AER error strings (Gong Chen) - Make <linux/aer.h> standalone includable (Thierry Reding) Virtualization - Add ACS quirk for Solarflare SFC9120 & SFC9140 (Alex Williamson) - Add ACS quirk for Intel 10G NICs (Alex Williamson) - Add ACS quirk for AMD A88X southbridge (Marti Raudsepp) - Remove unused pci_find_upstream_pcie_bridge(), pci_get_dma_source() (Alex Williamson) - Add device flag helpers (Ethan Zhao) - Assume all Mellanox devices have broken INTx masking (Gavin Shan) Generic host bridge driver - Fix ioport_map() for !CONFIG_GENERIC_IOMAP (Liviu Dudau) - Add pci_register_io_range() and pci_pio_to_address() (Liviu Dudau) - Define PCI_IOBASE as the base of virtual PCI IO space (Liviu Dudau) - Fix the conversion of IO ranges into IO resources (Liviu Dudau) - Add pci_get_new_domain_nr() and of_get_pci_domain_nr() (Liviu Dudau) - Add support for parsing PCI host bridge resources from DT (Liviu Dudau) - Add pci_remap_iospace() to map bus I/O resources (Liviu Dudau) - Add arm64 architectural support for PCI (Liviu Dudau) APM X-Gene - Add APM X-Gene PCIe driver (Tanmay Inamdar) - Add arm64 DT APM X-Gene PCIe device tree nodes (Tanmay Inamdar) Freescale i.MX6 - Probe in module_init(), not fs_initcall() (Lucas Stach) - Delay enabling reference clock for SS until it stabilizes (Tim Harvey) Marvell MVEBU - Fix uninitialized variable in mvebu_get_tgt_attr() (Thomas Petazzoni) NVIDIA Tegra - Make sure the PCIe PLL is really reset (Eric Yuen) - Add error path tegra_msi_teardown_irq() cleanup (Jisheng Zhang) - Fix extended configuration space mapping (Peter Daifuku) - Implement resource hierarchy (Thierry Reding) - Clear CLKREQ# enable on port disable (Thierry Reding) - Add Tegra124 support (Thierry Reding) ST Microelectronics SPEAr13xx - Pass config resource through reg property (Pratyush Anand) Synopsys DesignWare - Use NULL instead of false (Fabio Estevam) - Parse bus-range property from devicetree (Lucas Stach) - Use pci_create_root_bus() instead of pci_scan_root_bus() (Lucas Stach) - Remove pci_assign_unassigned_resources() (Lucas Stach) - Check private_data validity in single place (Lucas Stach) - Setup and clear exactly one MSI at a time (Lucas Stach) - Remove open-coded bitmap operations (Lucas Stach) - Fix configuration base address when using 'reg' (Minghuan Lian) - Fix IO resource end address calculation (Minghuan Lian) - Rename get_msi_data() to get_msi_addr() (Minghuan Lian) - Add get_msi_data() to pcie_host_ops (Minghuan Lian) - Add support for v3.65 hardware (Murali Karicheri) - Fold struct pcie_port_info into struct pcie_port (Pratyush Anand) TI Keystone - Add TI Keystone PCIe driver (Murali Karicheri) - Limit MRSS for all downstream devices (Murali Karicheri) - Assume controller is already in RC mode (Murali Karicheri) - Set device ID based on SoC to support multiple ports (Murali Karicheri) Xilinx AXI - Add Xilinx AXI PCIe driver (Srikanth Thokala) - Fix xilinx_pcie_assign_msi() return value test (Dan Carpenter) Miscellaneous - Clean up whitespace (Quentin Lambert) - Remove assignments from "if" conditions (Quentin Lambert) - Move PCI_VENDOR_ID_VMWARE to pci_ids.h (Francesco Ruggeri) - x86: Mark DMI tables as initialization data (Mathias Krause) - x86: Move __init annotation to the correct place (Mathias Krause) - x86: Mark constants of pci_mmcfg_nvidia_mcp55() as __initconst (Mathias Krause) - x86: Constify pci_mmcfg_probes[] array (Mathias Krause) - x86: Mark PCI BIOS initialization code as such (Mathias Krause) - Parenthesize PCI_DEVID and PCI_VPD_LRDT_ID parameters (Megan Kamiya) - Remove unnecessary variable in pci_add_dynid() (Tobias Klauser)" * tag 'pci-v3.18-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (109 commits) arm64: dts: Add APM X-Gene PCIe device tree nodes PCI: Add ACS quirk for AMD A88X southbridge devices PCI: xgene: Add APM X-Gene PCIe driver PCI: designware: Remove open-coded bitmap operations PCI/MSI: Remove unnecessary temporary variable PCI/MSI: Use __write_msi_msg() instead of write_msi_msg() MSI/powerpc: Use __read_msi_msg() instead of read_msi_msg() PCI/MSI: Use __get_cached_msi_msg() instead of get_cached_msi_msg() PCI/MSI: Add "msi_bus" sysfs MSI/MSI-X control for endpoints PCI/MSI: Remove "pos" from the struct msi_desc msi_attrib PCI/MSI: Remove unused kobject from struct msi_desc PCI/MSI: Rename pci_msi_check_device() to pci_msi_supported() PCI/MSI: Move D0 check into pci_msi_check_device() PCI/MSI: Remove arch_msi_check_device() irqchip: armada-370-xp: Remove arch_msi_check_device() PCI/MSI/PPC: Remove arch_msi_check_device() arm64: Add architectural support for PCI PCI: Add pci_remap_iospace() to map bus I/O resources of/pci: Add support for parsing PCI host bridge resources from DT of/pci: Add pci_get_new_domain_nr() and of_get_pci_domain_nr() ... Conflicts: arch/arm64/boot/dts/apm-storm.dtsi
2014-10-09Merge tag 'gpio-v3.18-1' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO changes from Linus Walleij: "This is the bulk of GPIO changes for the v3.18 development cycle: - Increase the default ARCH_NR_GPIO from 256 to 512. This was done to avoid having a custom <asm/gpio.h> header for the x86 architecture - GPIO is custom and complicated enough as it is already! We want to move to a radix to store the descriptors going forward, and finally get rid of this fixed array size altogether. - Endgame patching of the gpio_remove() semantics initiated by Abdoulaye Berthe. It is not accepted by the system that the removal of a GPIO chip fails during eg reboot or shutdown, and therefore the return value has now painfully been refactored away. For special cases like GPIO expanders on a hot-pluggable bus like USB, we may later add some gpiochip_try_remove() call, but for the cases we have now, return values are moot. - Some incremental refactoring of the gpiolib core and ACPI GPIO library for more descriptor usage. - Refactor the chained IRQ handler set-up method to handle also threaded, nested interrupts and set up the parent IRQ correctly. Switch STMPE and TC3589x drivers to use this registration method. - Add a .irq_not_threaded flag to the struct gpio_chip, so that also GPIO expanders that block but are still not using threaded IRQ handlers. - New drivers for the ARM64 X-Gene SoC GPIO controller. - The syscon GPIO driver has been improved to handle the "DSP GPIO" found on the TI Keystone 2 SoC:s. - ADNP driver switched to use gpiolib irqchip helpers. - Refactor the DWAPB driver to support being instantiated from and MFD cell (platform device). - Incremental feature improvement in the Zynq, MCP23S08, DWAPB, OMAP, Xilinx and Crystalcove drivers. - Various minor fixes" * tag 'gpio-v3.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (52 commits) gpio: pch: Build context save/restore only for PM pinctrl: abx500: get rid of unused variable gpio: ks8695: fix 'else should follow close brace '}'' gpio: stmpe: add verbose debug code gpio: stmpe: fix up interrupt enable logic gpio: staticize xway_stp_init() gpio: handle also nested irqchips in the chained handler set-up gpio: set parent irq on chained handlers gpiolib: irqchip: use irq_find_mapping while removing irqchip gpio: crystalcove: support virtual GPIO pinctrl: bcm281xx: make Kconfig dependency more strict gpio: kona: enable only on BCM_MOBILE or for compile testing gpio, bcm-kona, LLVMLinux: Remove use of __initconst gpio: Fix ngpio in gpio-xilinx driver gpio: dwapb: fix pointer to integer cast gpio: xgene: Remove unneeded #ifdef CONFIG_OF guard gpio: xgene: Remove unneeded forward declation for struct xgene_gpio gpio: xgene: Fix missing spin_lock_init() gpio: ks8695: fix switch case indentation gpiolib: add irq_not_threaded flag to gpio_chip ...
2014-10-09Merge branch 'timers-nohz-for-linus' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fixes from Ingo Molnar: "Main changes: - Fix the deadlock reported by Dave Jones et al - Clean up and fix nohz_full interaction with arch abilities - nohz init code consolidation/cleanup" * 'timers-nohz-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: nohz: nohz full depends on irq work self IPI support nohz: Consolidate nohz full init code arm64: Tell irq work about self IPI support arm: Tell irq work about self IPI support x86: Tell irq work about self IPI support irq_work: Force raised irq work to run on irq work interrupt irq_work: Introduce arch_irq_work_has_interrupt() nohz: Move nohz full init call to tick init
2014-10-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds2-29/+8
Pull networking updates from David Miller: "Most notable changes in here: 1) By far the biggest accomplishment, thanks to a large range of contributors, is the addition of multi-send for transmit. This is the result of discussions back in Chicago, and the hard work of several individuals. Now, when the ->ndo_start_xmit() method of a driver sees skb->xmit_more as true, it can choose to defer the doorbell telling the driver to start processing the new TX queue entires. skb->xmit_more means that the generic networking is guaranteed to call the driver immediately with another SKB to send. There is logic added to the qdisc layer to dequeue multiple packets at a time, and the handling mis-predicted offloads in software is now done with no locks held. Finally, pktgen is extended to have a "burst" parameter that can be used to test a multi-send implementation. Several drivers have xmit_more support: i40e, igb, ixgbe, mlx4, virtio_net Adding support is almost trivial, so export more drivers to support this optimization soon. I want to thank, in no particular or implied order, Jesper Dangaard Brouer, Eric Dumazet, Alexander Duyck, Tom Herbert, Jamal Hadi Salim, John Fastabend, Florian Westphal, Daniel Borkmann, David Tat, Hannes Frederic Sowa, and Rusty Russell. 2) PTP and timestamping support in bnx2x, from Michal Kalderon. 3) Allow adjusting the rx_copybreak threshold for a driver via ethtool, and add rx_copybreak support to enic driver. From Govindarajulu Varadarajan. 4) Significant enhancements to the generic PHY layer and the bcm7xxx driver in particular (EEE support, auto power down, etc.) from Florian Fainelli. 5) Allow raw buffers to be used for flow dissection, allowing drivers to determine the optimal "linear pull" size for devices that DMA into pools of pages. The objective is to get exactly the necessary amount of headers into the linear SKB area pre-pulled, but no more. The new interface drivers use is eth_get_headlen(). From WANG Cong, with driver conversions (several had their own by-hand duplicated implementations) by Alexander Duyck and Eric Dumazet. 6) Support checksumming more smoothly and efficiently for encapsulations, and add "foo over UDP" facility. From Tom Herbert. 7) Add Broadcom SF2 switch driver to DSA layer, from Florian Fainelli. 8) eBPF now can load programs via a system call and has an extensive testsuite. Alexei Starovoitov and Daniel Borkmann. 9) Major overhaul of the packet scheduler to use RCU in several major areas such as the classifiers and rate estimators. From John Fastabend. 10) Add driver for Intel FM10000 Ethernet Switch, from Alexander Duyck. 11) Rearrange TCP_SKB_CB() to reduce cache line misses, from Eric Dumazet. 12) Add Datacenter TCP congestion control algorithm support, From Florian Westphal. 13) Reorganize sk_buff so that __copy_skb_header() is significantly faster. From Eric Dumazet" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1558 commits) netlabel: directly return netlbl_unlabel_genl_init() net: add netdev_txq_bql_{enqueue, complete}_prefetchw() helpers net: description of dma_cookie cause make xmldocs warning cxgb4: clean up a type issue cxgb4: potential shift wrapping bug i40e: skb->xmit_more support net: fs_enet: Add NAPI TX net: fs_enet: Remove non NAPI RX r8169:add support for RTL8168EP net_sched: copy exts->type in tcf_exts_change() wimax: convert printk to pr_foo() af_unix: remove 0 assignment on static ipv6: Do not warn for informational ICMP messages, regardless of type. Update Intel Ethernet Driver maintainers list bridge: Save frag_max_size between PRE_ROUTING and POST_ROUTING tipc: fix bug in multicast congestion handling net: better IFF_XMIT_DST_RELEASE support net/mlx4_en: remove NETDEV_TX_BUSY 3c59x: fix bad split of cpu_to_le32(pci_map_single()) net: bcmgenet: fix Tx ring priority programming ...
2014-10-08Merge tag 'tty-3.18-rc1' of ↵Linus Torvalds1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial driver updates from Greg KH: "Here's the big tty/serial driver patchset for 3.18-rc1. Lots of little things in here, some good work from Peter Hurley on the tty core, and in lots of drivers. There are also lots of other driver updates in here as well, full details in the changelogs. All have been in the linux-next tree for a while" * tag 'tty-3.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (99 commits) Revert "serial/core: Initialize the console pm state" tty: serial: 8250: use 32bit variable for rpm_tx_active tty: serial: msm: Add earlycon support serial/core: Initialize the console pm state serial: asc: Conditionally use readl_relaxed (COMPILE_TEST) serial: of-serial: add PM suspend/resume support m68k: AMIGA_BUILTIN_SERIAL should depend on TTY asm/uapi: Add definition of TIOC[SG]RS485 tty/metag_da: Add console_poll module parameter serial: 8250_pci: remove rts_n override from Baytrail quirk serial: cadence: Add generic earlycon support serial: imx: change the wait even to interruptiable serial: imx: terminate the RX DMA when the UART is suspending serial: imx: fix throttle/unthrottle callbacks for hardware assisted flow control serial: 8250: Add Quark X1000 to 8250_pci.c tty: omap-serial: pull out calculation from baud_is_mode16 tty: omap-serial: fix division by zero xen_hvc: no reason to write the type key on xenstore tty: serial: 8250_core: remove UART_IER_RDI in serial8250_stop_rx() tty: serial: 8250_core: use the ->line argument as a hint in serial8250_find_match_or_unused() ...
2014-10-08Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds2-44/+12
Pull KVM updates from Paolo Bonzini: "Fixes and features for 3.18. Apart from the usual cleanups, here is the summary of new features: - s390 moves closer towards host large page support - PowerPC has improved support for debugging (both inside the guest and via gdbstub) and support for e6500 processors - ARM/ARM64 support read-only memory (which is necessary to put firmware in emulated NOR flash) - x86 has the usual emulator fixes and nested virtualization improvements (including improved Windows support on Intel and Jailhouse hypervisor support on AMD), adaptive PLE which helps overcommitting of huge guests. Also included are some patches that make KVM more friendly to memory hot-unplug, and fixes for rare caching bugs. Two patches have trivial mm/ parts that were acked by Rik and Andrew. Note: I will soon switch to a subkey for signing purposes" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (157 commits) kvm: do not handle APIC access page if in-kernel irqchip is not in use KVM: s390: count vcpu wakeups in stat.halt_wakeup KVM: s390/facilities: allow TOD-CLOCK steering facility bit KVM: PPC: BOOK3S: HV: CMA: Reserve cma region only in hypervisor mode arm/arm64: KVM: Report correct FSC for unsupported fault types arm/arm64: KVM: Fix VTTBR_BADDR_MASK and pgd alloc kvm: Fix kvm_get_page_retry_io __gup retval check arm/arm64: KVM: Fix set_clear_sgi_pend_reg offset kvm: x86: Unpin and remove kvm_arch->apic_access_page kvm: vmx: Implement set_apic_access_page_addr kvm: x86: Add request bit to reload APIC access page address kvm: Add arch specific mmu notifier for page invalidation kvm: Rename make_all_cpus_request() to kvm_make_all_cpus_request() and make it non-static kvm: Fix page ageing bugs kvm/x86/mmu: Pass gfn and level to rmapp callback. x86: kvm: use alternatives for VMCALL vs. VMMCALL if kernel text is read-only kvm: x86: use macros to compute bank MSRs KVM: x86: Remove debug assertion of non-PAE reserved bits kvm: don't take vcpu mutex for obviously invalid vcpu ioctls kvm: Faults which trigger IO release the mmap_sem ...
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-23 16:28:46 +0300