summaryrefslogtreecommitdiff
path: root/arch/mips
AgeCommit message (Collapse)AuthorFilesLines
2008-10-16device create: misc: convert device_create_drvdata to device_createGreg Kroah-Hartman2-4/+3
Now that device_create() has been audited, rename things back to the original call to be sane. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-15MIPS: Kill unused <asm/debug.h> inclusionsShinya Kuribayashi7-8/+0
Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-15MIPS: IP32: Add platform device for CMOS RTC; remove dead codeThomas Bogendoerfer2-5/+16
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-15MIPS: IP27: Switch over to RTC class driverThomas Bogendoerfer1-77/+22
This patchset removes some dead code and creates a platform device for the RTC class driver. Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-15MIPS: IP22/28: Switch over to RTC class driverThomas Bogendoerfer5-87/+15
This patchset removes some dead code and creates a platform device for the RTC class driver. Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-15MIPS: PCI: Scan busses when they are registeredAurelien Jarno1-27/+53
The patch below changes register_pci_controller() such that controllers being added after pcibios_init() has run are be scanned immediately. This is needed for example by the BCM47xx PCI controller, which is located on the SSB bus, which is now initialized after the PCI subsystem. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-15MIPS: WGT634U: Add reset button supportAurelien Jarno1-0/+37
This patch adds support for the reset button of WGT634U machine, using GPIO interrupts. Based on a patch from Michel Lespinasse. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-15MIPS: BCM47xx: Use the new SSB GPIO APIAurelien Jarno4-74/+58
This patch simplifies the BCM47xx GPIO code by using the new SSB GPIO API, which does a lot things that were implemented directly in the BCM47xx code. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-15MIPS: BCM47xx: Remove references to BCM947XXAurelien Jarno1-3/+3
This patch removes the remaining reference to the BCM947xx development board codename. Signed-off-by: Florian Fainelli <florian.fainelli@telecomint.eu> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-15MIPS: WGT634U: Add machine detection messageAurelien Jarno1-0/+3
This adds a printk message when a WGT634U machine is detected. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-15MIPS: Align .data.cacheline_aligned based on CONFIG_MIPS_L1_CACHE_SHIFTDavid Daney1-1/+1
Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Tomaso Paoletti <tpaoletti@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-15MIPS: show_cpuinfo prints the type of the calling CPUJohannes Dickgreber1-1/+1
It should print the type of the Nth processor. Signed-off-by: Johannes Dickgreber <tanzy@gmx.de> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-15MIPS: Fix wrong branch target in new spin_lock code.Johannes Dickgreber1-1/+1
Signed-off-by: Johannes Dickgreber <tanzy@gmx.de> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-15MIPS: Have a heart for a lonely, lost header file ...Ralf Baechle1-0/+46
... and move it to where all its brothers and sisters reside. Requested by Shane McDonald <mcdonald.shane@gmail.com>. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-13ide-generic: remove no longer needed ide_probe_legacy()Bartlomiej Zolnierkiewicz1-29/+0
There is now a generic solution [ide_generic_check_pci_legacy_iobases()] so MIPS-specific ide_probe_legacy() is no longer necessary. Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-13Merge branch 'master' of ↵David Woodhouse588-731/+66020
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 Conflicts: include/asm-x86/statfs.h
2008-10-11MIPS: RB532: provide GPIO_BUILTIN_NR and irq_to_gpio/gpio_to_irqFlorian Fainelli1-7/+7
This patchs defines the number of built-in the GPIOs present on the SoC as Documentation/gpio.txt recommends to do. Define irq_to_gpio/gpio_to_irq to return the right values so that it fixes a compilation error on drivers/gpio/gpiolib.c when enabling debugfs. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11MIPS: Move ptrace prototypes to ptrace.hRalf Baechle2-6/+6
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11MIPS: Ptrace support for HARDWARE_WATCHPOINTSDavid Daney3-1/+155
This is the final part of the watch register patch. Here we hook up ptrace so that the user space debugger (gdb), can set and read the registers. Signed-off-by: David Daney <ddaney@avtrex.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11MIPS: Scheduler support for HARDWARE_WATCHPOINTS.David Daney1-0/+2
Here we hook up the scheduler. Whenever we switch to a new process, we check to see if the watch registers should be installed, and do it if needed. Signed-off-by: David Daney <ddaney@avtrex.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11MIPS: Watch exception handling for HARDWARE_WATCHPOINTS.David Daney2-5/+23
Here we hook up the watch exception handler so that it sends SIGTRAP when the hardware watch registers are triggered. Signed-off-by: David Daney <ddaney@avtrex.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11MIPS: Probe watch registers and report configuration.David Daney2-2/+13
Probe for watch register characteristics, and report them in /proc/cpuinfo. Signed-off-by: David Daney <ddaney@avtrex.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11MIPS: Add HARDWARE_WATCHPOINTS definitions and support code.David Daney6-1/+249
This is the main support code for the patch. Here we just add the code, the following patches hook it up. Signed-off-by: David Daney <ddaney@avtrex.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> create mode 100644 arch/mips/include/asm/watch.h create mode 100644 arch/mips/kernel/watch.c
2008-10-11MIPS: Add HARDWARE_WATCHPOINTS configure option.David Daney1-0/+7
This is automatically set for all MIPS32 and MIPS64 processors. Signed-off-by: David Daney <ddaney@avtrex.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11MIPS: Replace use of <asm-generic/uaccess.h> with native implementations.Ralf Baechle1-1/+263
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11MIPS: TXx9: Add TX4939 ATA support (v2)Atsushi Nemoto3-0/+48
Add a helper routine to register tx4939ide driver and use it on RBTX4939 board. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11MIPS: Rewrite spinlocks to ticket locks.Ralf Baechle3-77/+188
Based on patch by Chad Reese of Cavium Networks. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11MIPS: IP checksums: Optimize adjust of sum on buffers of odd alignment.Ralf Baechle1-11/+24
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11MIPS: IP checksums: Remove unncessary .set pseudosRalf Baechle1-12/+0
They possibly silence meaningful warnings ... Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11MIPS: IP checksums: Remove unncessary folding of sum to 16 bit.Ralf Baechle1-10/+0
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11MIPS: Move headfiles to new location below arch/mips/includeRalf Baechle463-42/+61652
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11MIPS: Alchemy: rename directoryRalf Baechle54-21/+21
It's more than the au1000 these days. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11MIPS: TXx9: Implement prom_free_prom_memoryAtsushi Nemoto1-0/+6
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11MIPS: TXx9: Add RBTX4939 board supportAtsushi Nemoto7-6/+437
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> create mode 100644 arch/mips/txx9/rbtx4939/Makefile create mode 100644 arch/mips/txx9/rbtx4939/irq.c create mode 100644 arch/mips/txx9/rbtx4939/prom.c create mode 100644 arch/mips/txx9/rbtx4939/setup.c create mode 100644 include/asm-mips/txx9/rbtx4939.h
2008-10-11MIPS: TXx9: Add TX4939 SoC supportAtsushi Nemoto6-0/+793
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> create mode 100644 arch/mips/pci/pci-tx4939.c create mode 100644 arch/mips/txx9/generic/irq_tx4939.c create mode 100644 arch/mips/txx9/generic/setup_tx4939.c create mode 100644 include/asm-mips/txx9/tx4939.h
2008-10-11MIPS: TXx9: IOC LED supportAtsushi Nemoto4-0/+118
Add leds-gpio platform device for controlling LEDs connected to IOC on RBTX49XX and JMR3927 board. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11MIPS: TXx9: Microoptimize interrupt handlersAtsushi Nemoto2-7/+7
The IOC interrupt status register on RBTX49XX only have 8 bits. Use 8-bit version of __fls() to optimize interrupt handlers. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11MIPS: TXx9: stop_unused_modulesAtsushi Nemoto2-0/+87
TXx9 SoCs have pin multiplex. Stop some controller modules which can not be used due to pin configurations. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11MIPS: RB532: Convert to GPIO libFlorian Fainelli2-68/+162
This patch converts the rb532 code to use gpio library and register its gpio chip. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11MIPS: RB532: Cleanup the headers againFlorian Fainelli3-6/+6
This patch cleans up headers and regroups informations to where they should reside. While moving, try to have a consistant naming for defines. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11MIPS: RB532: Remove obsolute reference to setup_serial_portFlorian Fainelli1-2/+0
We are no longer using setup_serial_port. So just remove it from the prom code. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11MIPS: RB532: Fix id usage in platform devicesFlorian Fainelli1-3/+3
When there is only platform device of the same type, id = -1 should be used, fix this. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11MIPS: RB532: replace raw volatile read with a readlFlorian Fainelli1-1/+1
This patch replaces a raw read using volatiles with a readl. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11MIPS: RB532: Remove gpio bootup stateFlorian Fainelli1-10/+0
We are no longer using gpio bootup state, so do not export it and do not parse the kernel command line tag for it. Instead we provide gpio-keys for the button the gpio bootup state was checking. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11MIPS: RB532: Use physical addresses for gpio and device controller registersFlorian Fainelli1-4/+4
This patch fixes the misuse of virtual addresses for the GPIO and third device controller which would lead to problems while accessing ioremap'd registers. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11MIPS: RB532: Cleanup and group definitions to their right placesFlorian Fainelli1-14/+2
This patch moves GPIO related definitions to gpio.h and IRQ related to irq.h Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11MIPS: TXx9: Add __init tag for tx4938_pcic1_map_irq.Atsushi Nemoto1-1/+1
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11MIPS: TXx9: Add board_be_init for TX4927/TX4938Atsushi Nemoto2-0/+46
Setup default board_be_handler for TX4927/TX4938. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11MIPS: TXx9: Default machine_restart using watchdog resetAtsushi Nemoto3-0/+71
Add default machine_restart routine using watchdog reset of TX4927 and TX4938. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11MIPS: TXx9: Make spi_eeprom.c more genericAtsushi Nemoto4-18/+24
Helper routines in txx9/rbtx4938/spi_eeprom.c is not TX4938 specific. Move it to txx9/generic/ directory and make it works with SPI bus number other than 0. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> create mode 100644 arch/mips/txx9/generic/spi_eeprom.c delete mode 100644 arch/mips/txx9/rbtx4938/spi_eeprom.c
generated by cgit v1.2.3 (git 2.39.0) at 2025-02-14 22:37:26 +0300