summaryrefslogtreecommitdiff
path: root/arch/mips
AgeCommit message (Collapse)AuthorFilesLines
2011-05-19SSB: Change fallback sprom to callback mechanism.Hauke Mehrtens1-2/+14
Some embedded devices like the Netgear WNDR3300 have two SSB based cards without an own sprom on the pci bus. We have to provide two different fallback sproms for these and this was not possible with the old solution. In the bcm47xx architecture the sprom data is stored in the nvram in the main flash storage. The architecture code will be able to fill the sprom with the stored data based on the bus where the device was found. The bcm63xx code should do the same thing as before, just using the new API. Acked-by: Michael Buesch <mb@bu3sch.de> Cc: netdev@vger.kernel.org Cc: linux-wireless@vger.kernel.org Cc: Florian Fainelli <florian@openwrt.org> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2362/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-05-19MIPS: Alchemy: Clean up GPIO registers and accessorsManuel Lauss6-52/+56
remove au_readl/au_writel, remove the predefined GPIO1/2 KSEG1 register addresses and fix the fallout in all boards and drivers. This also fixes a bug in the mtx-1_wdt driver which was introduced by commit 6ea8115bb6f359df4f45152f2b40e1d4d1891392 ("Convert mtx1 wdt to be a platform device and use generic GPIO API") before this patch mtx-1_wdt only modified GPIO215, the patch then used the gpio resource information as bit index into the GPIO2 register but the conversion to the GPIO API didn't realize that. With this patch the drivers original behaviour is restored and GPIO15 is left alone. Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> Cc: Florian Fainelli <florian@openwrt.org> To: Linux-MIPS <linux-mips@linux-mips.org> Cc: linux-watchdog@vger.kernel.org Cc: Wim Van Sebroeck <wim@iguana.be> Patchwork: https://patchwork.linux-mips.org/patch/2381/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org
2011-05-19MIPS: Alchemy: Cleanup DMA addressesManuel Lauss4-85/+35
According to the databooks, the Au1000 DMA engine must be programmed with the physical FIFO addresses. This patch does that; furthermore this opened the possibility to get rid of a lot of now unnecessary address defines. Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> To: Linux-MIPS <linux-mips@linux-mips.org> Cc: Florian Fainelli <florian@openwrt.org> Cc: Wolfgang Grandegger <wg@grandegger.com> Patchwork: https://patchwork.linux-mips.org/patch/2348/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org
2011-05-19MIPS: Alchemy: Rewrite ethernet platform setupManuel Lauss2-91/+123
Rewrite ethernet setup to use runtime cpu detection, and also clean up the ethernet base address mess as far as possible. Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> To: Linux-MIPS <linux-mips@linux-mips.org> Cc: Florian Fainelli <florian@openwrt.org> Cc: Wolfgang Grandegger <wg@grandegger.com> Patchwork: https://patchwork.linux-mips.org/patch/2353/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org
2011-05-19MIPS: Alchemy: Rewrite UART setup and constants.Manuel Lauss9-78/+107
Detect CPU type at runtime and setup uarts accordingly; also clean up the uart base address mess in the process as far as possible. Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> To: Linux-MIPS <linux-mips@linux-mips.org> Cc: Florian Fainelli <florian@openwrt.org> Cc: Wolfgang Grandegger <wg@grandegger.com> Patchwork: https://patchwork.linux-mips.org/patch/2352/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org
2011-05-19MIPS: Alchemy: Convert dbdma.c to syscore_opsManuel Lauss3-88/+47
Convert the PM sysdev to syscore_ops and clean up the ddma addresses a bit. Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> To: Linux-MIPS <linux-mips@linux-mips.org> Cc: Florian Fainelli <florian@openwrt.org> Cc: Wolfgang Grandegger <wg@grandegger.com> Patchwork: https://patchwork.linux-mips.org/patch/2351/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-05-19MIPS: Alchemy: Convert irq.c to syscore_ops.Manuel Lauss1-60/+41
Convert the PM sysdev to use syscore_ops instead. Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> To: Linux-MIPS <linux-mips@linux-mips.org> Cc: Florian Fainelli <florian@openwrt.org> Cc: Wolfgang Grandegger <wg@grandegger.com> Patchwork: https://patchwork.linux-mips.org/patch/2350/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-05-19MIPS: Alchemy: irq code and constant cleanupManuel Lauss2-231/+140
replace au_readl/au_writel with __raw_readl/__raw_writel, and clean up IC-related stuff from the headers. Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> To: Linux-MIPS <linux-mips@linux-mips.org> Cc: Florian Fainelli <florian@openwrt.org> Cc: Wolfgang Grandegger <wg@grandegger.com> Patchwork: https://patchwork.linux-mips.org/patch/2354/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-05-19MIPS: Alchemy: update inlinable GPIO APIManuel Lauss1-0/+51
This fixes a build failure with gpio_keys and CONFIG_GPIOLIB=n (mtx1): CC drivers/input/keyboard/gpio_keys.o gpio_keys.c: In function 'gpio_keys_report_event': gpio_keys.c:325:2: error: implicit declaration of function 'gpio_get_value_cansleep' gpio_keys.c: In function 'gpio_keys_setup_key': gpio_keys.c:390:3: error: implicit declaration of function 'gpio_set_debounce' Also add stubs for the other new functions. Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> To: Linux-MIPS <linux-mips@linux-mips.org> Cc: Florian Fainelli <florian@openwrt.org> Cc: Wolfgang Grandegger <wg@grandegger.com> Patchwork: https://patchwork.linux-mips.org/patch/2346/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-05-19MIPS: DB1200: Set Config[OD] for improved stability.Manuel Lauss2-2/+9
Setting Config[OD] gets rid of a _LOT_ of spurious CPLD interrupts, but also decreases overall performance a bit. Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> To: Linux-MIPS <linux-mips@linux-mips.org> Cc: Florian Fainelli <florian@openwrt.org> Cc: Wolfgang Grandegger <wg@grandegger.com> Patchwork: https://patchwork.linux-mips.org/patch/2347/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-05-19MIPS: Split do_syscall_trace into two functions.Ralf Baechle7-20/+43
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-05-19MIPS: Use single define for pending work on syscall exitRalf Baechle2-1/+4
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-05-19MIPS: IP27: Remove pointless switch statement.Ralf Baechle1-12/+1
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-05-19MIPS: Lantiq: Add etop board supportJohn Crispin1-0/+6
Register the etop platform device inside the machtype specific init code. Signed-off-by: John Crispin <blogic@openwrt.org> Signed-off-by: Ralph Hempel <ralph.hempel@lantiq.com> Signed-off-by: David Daney <ddaney@caviumnetworks.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2356/ Patchwork: https://patchwork.linux-mips.org/patch/2370/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-05-19MIPS: Lantiq: Add ethernet driverJohn Crispin4-2/+33
This patch adds the driver for the ETOP Packet Processing Engine (PPE32) found inside the XWAY family of Lantiq MIPS SoCs. This driver makes 100MBit ethernet work. Support for all 8 dma channels, gbit and the embedded switch found on the ar9/vr9 still needs to be implemented. Signed-off-by: John Crispin <blogic@openwrt.org> Signed-off-by: Ralph Hempel <ralph.hempel@lantiq.com> Cc: linux-mips@linux-mips.org Cc: netdev@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/2357/ Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-05-19MIPS: Lantiq: Add DMA supportJohn Crispin5-2/+317
This patch adds support for the DMA engine found inside the XWAY family of SoCs. The engine has 5 ports and 20 channels. Signed-off-by: John Crispin <blogic@openwrt.org> Signed-off-by: Ralph Hempel <ralph.hempel@lantiq.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2355/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-05-19MIPS: Lantiq: Add more gpio driversJohn Crispin3-1/+284
The XWAY family allows to extend the number of gpios by using shift registers or latches. This patch adds the 2 drivers needed for this. The extended gpios are output only. [ralf@linux-mips.org: Fixed ltq_stp_probe section() attributes.] Signed-off-by: John Crispin <blogic@openwrt.org> Signed-off-by: Ralph Hempel <ralph.hempel@lantiq.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2258/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-05-19MIPS: Lantiq: Add machtypes for lantiq eval kitsJohn Crispin6-0/+155
This patch adds mach specific code for the Lantiq EASY50712/50601 evaluation boards Signed-off-by: John Crispin <blogic@openwrt.org> Signed-off-by: Ralph Hempel <ralph.hempel@lantiq.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2255/ Patchwork: https://patchwork.linux-mips.org/patch/2361/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-05-19MIPS: Lantiq: Add mips_machine supportJohn Crispin7-2/+86
This patch adds support for Gabor's mips_machine patch. Signed-off-by: John Crispin <blogic@openwrt.org> Signed-off-by: Ralph Hempel <ralph.hempel@lantiq.com> Cc: Gabor Juhos <juhosg@openwrt.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2251/ Patchwork: https://patchwork.linux-mips.org/patch/2358/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-05-19MIPS: Lantiq: Add platform device supportJohn Crispin6-2/+263
This patch adds the wrappers for registering our platform devices. Signed-off-by: John Crispin <blogic@openwrt.org> Signed-off-by: Ralph Hempel <ralph.hempel@lantiq.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2254/ Patchwork: https://patchwork.linux-mips.org/patch/2360/ Patchwork: https://patchwork.linux-mips.org/patch/2359/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-05-19MIPS: Lantiq: Add PCI controller support.John Crispin5-0/+478
The Lantiq family of SoCs have a EBU (External Bus Unit). This patch adds the driver that allows us to use the EBU as a PCI controller. In order for PCI to work the EBU is set to endianess swap all the data. In addition we need to make use of SWAP_IO_SPACE for device->host DMA to work. The clock of the PCI works in several modes (internal/external). If this is not configured correctly the SoC will hang. Signed-off-by: John Crispin <blogic@openwrt.org> Signed-off-by: Ralph Hempel <ralph.hempel@lantiq.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2250/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-05-19MIPS: Lantiq: add SoC specific code for XWAY familyJohn Crispin16-0/+1026
Add support for the Lantiq XWAY family of Mips24KEc SoCs. * Danube (PSB50702) * Twinpass (PSB4000) * AR9 (PSB50802) * Amazon SE (PSB5061) The Amazon SE is a lightweight SoC and has no PCI as well as a different clock. We split the code out into seperate files to handle this. The GPIO pins on the SoCs are multi function and there are several bits we can use to configure the pins. To be as compatible as possible to GPIOLIB we add a function int lq_gpio_request(unsigned int pin, unsigned int alt0, unsigned int alt1, unsigned int dir, const char *name); which lets you configure the 2 "alternate function" bits. This way drivers like PCI can make use of GPIOLIB without a cubersome wrapper. The PLL code inside arch/mips/lantiq/xway/clk-xway.c is voodoo to me. It was taken from a 2.4.20 source tree and was never really changed by me since then. Signed-off-by: John Crispin <blogic@openwrt.org> Signed-off-by: Ralph Hempel <ralph.hempel@lantiq.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2249/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-05-19MIPS: Lantiq: Add initial support for Lantiq SoCsJohn Crispin13-0/+774
Add initial support for Mips based SoCs made by Lantiq. This series will add support for the XWAY family. The series allows booting a minimal system using a initramfs or NOR. Missing drivers and support for Amazon and GPON family will be provided in a later series. [Ralf: Remove some cargo cult programming and fixed formatting.] Signed-off-by: John Crispin <blogic@openwrt.org> Signed-off-by: Ralph Hempel <ralph.hempel@lantiq.com> Signed-off-by: David Daney <ddaney@caviumnetworks.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2252/ Patchwork: https://patchwork.linux-mips.org/patch/2371/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-05-19MIPS: Enable kmemleak for MIPSMaxin John1-0/+1
Signed-off-by: Maxin B. John <maxin.john@gmail.com> To: Catalin Marinas <catalin.marinas@arm.com> Cc: Daniel Baluta <dbaluta@ixiacom.com> Cc: naveen yadav <yad.naveen@gmail.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: linux-mm@kvack.org Patchwork: https://patchwork.linux-mips.org/patch/2244/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-05-19MIPS: XLR, XLS: Add PCI support.Jayachandran C4-1/+321
Adds pci/pci-xlr.c to support for XLR PCI/PCI-X interface and XLS PCIe interface. Update irq.c to ack PCI interrupts, use irq handler data to do the PCI/PCIe bus ack. Signed-off-by: Jayachandran C <jayachandranc@netlogicmicro.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2337/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-05-19MIPS: Add default configuration for XLR/XLS processorsJayachandran C1-0/+574
Enable XLR CPU support, SMP, initramfs based root filesystem etc. [ralf@linux-mips.org: shrink the defconfig file through make savedefconfig.] Signed-off-by: Jayachandran C <jayachandranc@netlogicmicro.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2338/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-05-19MIPS: Kconfig and Makefile update for Netlogic XLR/XLSJayachandran C7-0/+67
Add NLM_XLR_BOARD, CPU_XLR and other config options Makefile updates, mostly based on r4k Signed-off-by: Jayachandran C <jayachandranc@netlogicmicro.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2334/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-05-19MIPS: Platform files for XLR/XLS processor supportJayachandran C14-0/+1637
* include/asm/netlogic added with files common for all Netlogic processors (common with XLP which will be added later) * include/asm/netlogic/xlr for XLR/XLS chip specific files * netlogic/xlr for XLR/XLS platform files Signed-off-by: Jayachandran C <jayachandranc@netlogicmicro.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2334/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-05-19MIPS: Netlogic: Cache, TLB support and feature overrides for XLRJayachandran C3-0/+4
CPU_XLR case added to mm/tlbex.c CPU_XLR case added to mm/c-r4k.c for PINDEX attribute Feature overrides for XLR cpu. Signed-off-by: Jayachandran C <jayachandranc@netlogicmicro.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2333/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-05-19MIPS: Netlogic: mach-netlogic include filesJayachandran C3-0/+87
Add war.h and irq.h with XLR/XLS definitions. Signed-off-by: Jayachandran C <jayachandranc@netlogicmicro.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2331/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-05-19MIPS: Netlogic XLR/XLS processor IDs.Jayachandran C2-0/+83
Add Netlogic Microsystems company ID and processor IDs for XLR and XLS processors for CPU probe. Add CPU_XLR to cpu_type_enum. Signed-off-by: Jayachandran C <jayachandranc@netlogicmicro.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2367/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-05-18MIPS: Kludge IP27 build for 2.6.39.Ralf Baechle1-0/+2
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-05-18MIPS: AR7: Fix GPIO register size for Titan variant.Florian Fainelli1-3/+1
The 'size' variable contains the correct register size for both AR7 and Titan, but we never used it to ioremap the correct register size. This problem only shows up on Titan. [ralf@linux-mips.org: Fixed the fix. The original patch as in patchwork recognizes the problem correctly then fails to fix it ...] Reported-by: Alexander Clouter <alex@digriz.org.uk> Signed-off-by: Florian Fainelli <florian@openwrt.org> Patchwork: https://patchwork.linux-mips.org/patch/2380/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-05-18MIPS: Fix duplicate invocation of notify_die.Ralf Baechle1-4/+2
Initial patch by Yury Polyanskiy <ypolyans@princeton.edu>. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/2373/
2011-05-18MIPS: RB532: Fix iomap resource size miscalculation.Ralf Baechle1-1/+1
This is the MIPS portion of Joe Perches <joe@perches.com>'s https://patchwork.linux-mips.org/patch/2172/ which seems to have been lost in time and space. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-05-14Merge branch 'consolidate-clksrc-i8253' of ↵Thomas Gleixner176-2797/+3861
master.kernel.org:~rmk/linux-2.6-arm into timers/clocksource Conflicts: arch/ia64/kernel/cyclone.c arch/mips/kernel/i8253.c arch/x86/kernel/i8253.c Reason: Resolve conflicts so further cleanups do not conflict further Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-05-14clocksource: convert mips to generic i8253 clocksourceRussell King3-77/+7
Convert MIPS i8253 clocksource code to use generic i8253 clocksource. Acked-by: John Stultz <john.stultz@linaro.org> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-05-11dt/flattree: explicitly pass command line pointer to early_init_dt_scan_chosenGrant Likely2-4/+2
This patch drops the reference to a global 'cmd_line' variable from early_init_dt_scan_chosen, and instead passes the pointer to the command line string via the *data argument. Each architecture does something slightly different with the initial command line, so it makes sense for the architecture to be able to specify the variable name. Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-05-10MIPS: Alchemy: fix xxs1500 build errorManuel Lauss1-3/+2
This fixes: alchemy/xxs1500/init.c: In function 'prom_init': alchemy/xxs1500/init.c:57:17: error: ignoring return value of 'kstrtoul', declared with attribute warn_unused_result Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> Cc: Linux-MIPS <linux-mips@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/2340/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-05-10MIPS: Invalidate old TLB mappings when updating huge page PTEs.David Daney1-0/+1
Without this, stale Icache or TLB entries may be used. Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org https://patchwork.linux-mips.org/patch/2318/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-05-10MIPS: Hibernation: Fixes for PAGE_SIZE >= 64kbWu Zhangjin1-1/+1
PAGE_SIZE >= 64kb (1 << 16) is too big to be the immediate of the addiu/daddiu instruction, so, use addu/daddu instruction instead. The following compiling error is fixed: AS arch/mips/power/hibernate.o arch/mips/power/hibernate.S: Assembler messages: arch/mips/power/hibernate.S:38: Error: expression out of range make[2]: *** [arch/mips/power/hibernate.o] Error 1 make[1]: *** [arch/mips/power] Error 2 Reported-by: Roman Mamedov <rm@romanrm.ru> Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2313/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-05-10MIPS: JZ4740: Set one-shot feature flag for the clockeventLars-Peter Clausen1-1/+1
The code for supporting one-shot mode for the clockevent is already there, only the feature flag was not set. Setting the one-shot flag allows the kernel to run in tickless mode. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2261/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-05-10MIPS: JZ4740: Export symbols to the watchdog driver moduleRalf Baechle1-0/+2
MODPOST 356 modules ERROR: "jz4740_timer_disable_watchdog" [drivers/watchdog/jz4740_wdt.ko] undefine d! ERROR: "jz4740_timer_enable_watchdog" [drivers/watchdog/jz4740_wdt.ko] undefined ! make[1]: *** [__modpost] Error 1 Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-05-10MIPS: JZ4740: Fix GCC 4.6.0 build error.Ralf Baechle1-3/+1
CC arch/mips/jz4740/dma.o arch/mips/jz4740/dma.c: In function 'jz4740_dma_chan_irq': arch/mips/jz4740/dma.c:245:11: error: variable 'status' set but not used [-Werro r=unused-but-set-variable] Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-05-10MIPS: Audit: Fix success success argument pass to audit_syscall_exitRalf Baechle1-2/+2
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-05-10MIPS: Fix calc_vmlinuz_load_addr build warnings.Ralf Baechle1-1/+1
HOSTCC arch/mips/boot/compressed/calc_vmlinuz_load_addr arch/mips/boot/compressed/calc_vmlinuz_load_addr.c: In function 'main': arch/mips/boot/compressed/calc_vmlinuz_load_addr.c:35:2: warning: format '%llx' expects type 'long long unsigned int *', but argument 3 has type 'uint64_t *' arch/mips/boot/compressed/calc_vmlinuz_load_addr.c:54:2: warning: format '%llx' expects type 'long long unsigned int', but argument 2 has type 'uint64_t' Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-05-10MIPS: Alchemy: Fix GCC 4.6.0 build error.Ralf Baechle1-28/+33
CC arch/mips/alchemy/devboards/db1x00/board_setup.o arch/mips/alchemy/devboards/db1x00/board_setup.c: In function 'board_setup': arch/mips/alchemy/devboards/db1x00/board_setup.c:130:6: error: variable 'pin_func' set but not used [-Werror=unused-but-set-variable] Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-05-10MIPS: Document former use of timerfd(2) syscall number.Ralf Baechle4-4/+4
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-05-10MIPS: IP27: Fix GCC 4.6.0 build error.Ralf Baechle1-2/+1
CC arch/mips/sgi-ip27/ip27-hubio.o arch/mips/sgi-ip27/ip27-hubio.c: In function 'hub_pio_map': arch/mips/sgi-ip27/ip27-hubio.c:32:20: error: variable 'junk' set but not used [-Werror=unused-but-set-variable] cc1: all warnings being treated as errors Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-05-10MIPS: IP27: Fix GCC 4.6.0 build error.Ralf Baechle1-3/+0
CC arch/mips/sgi-ip27/ip27-hubio.o arch/mips/sgi-ip27/ip27-hubio.c: In function 'hub_pio_map': arch/mips/sgi-ip27/ip27-hubio.c:32:20: error: variable 'junk' set but not used [-Werror=unused-but-set-variable] cc1: all warnings being treated as errors Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-03-18 00:18:49 +0300