summaryrefslogtreecommitdiff
path: root/arch/mips/netlogic/xlp
AgeCommit message (Collapse)AuthorFilesLines
2012-11-09MIPS: Netlogic: Support for XLR/XLS Fast Message NetworkGanesan Ramalingam1-0/+4
On XLR/XLS, the cpu cores communicate with fast on-chip devices (e.g. network accelerator, security engine etc.) using the Fast Messaging Network(FMN). The FMN queues and credits needs to be configured and intialized before it can be used. The co-processor 2 on XLR/XLS CPU cores has registers for FMN access, and the XLR/XLS has custom instructions for sending and loading messages. The FMN can deliver also per-cpu interrupts when messages are available at the CPU. This patch adds FMN initialization, adds interrupt setup and handling, and also provides support for sending and receiving FMN messages. Signed-off-by: Ganesan Ramalingam <ganesanr@broadcom.com> Signed-off-by: Jayachandran C <jchandra@broadcom.com> Patchwork: http://patchwork.linux-mips.org/patch/4468 Signed-off-by: John Crispin <blogic@openwrt.org>
2012-11-09MIPS: Netlogic: PIC IRQ handling update for multi-chipJayachandran C1-38/+0
Create struct nlm_pic_irq for interrupts handled by the PIC. This simplifies IRQ handling for multi-SoC as well as the single SoC cases. Also split the setup of percpu and PIC interrupts so that we can configure the PIC interrupts for every node. Signed-off-by: Jayachandran C <jchandra@broadcom.com> Patchwork: http://patchwork.linux-mips.org/patch/4467 Signed-off-by: John Crispin <blogic@openwrt.org>
2012-11-09MIPS: Netlogic: Support for multi-chip configurationJayachandran C3-31/+37
Upto 4 Netlogic XLP SoCs can be connected over ICI links to form a coherent multi-node system. Each SoC has its own set of on-chip devices including PIC. To support this, add a per SoC stucture and use it for the PIC and SYS block addresses instead of using global variables. Signed-off-by: Jayachandran C <jchandra@broadcom.com> Patchwork: http://patchwork.linux-mips.org/patch/4469 Signed-off-by: John Crispin <blogic@openwrt.org>
2012-11-09MIPS: Netlogic: Move from u32 cpumask to cpumask_tJayachandran C2-30/+53
Initial code to support more than 32 cpus. The platform CPU mask is updated from 32-bit mask to cpumask_t. Convert places that use cpu_/cpus_ functions to use cpumask_* functions. Signed-off-by: Jayachandran C <jchandra@broadcom.com> Patchwork: http://patchwork.linux-mips.org/patch/4464 Signed-off-by: John Crispin <blogic@openwrt.org>
2012-11-09MIPS: Netlogic: Move fdt init to plat_mem_setupJayachandran C1-13/+14
At this point early printk is available, so debugging device tree issues is easier. Signed-off-by: Jayachandran C <jchandra@broadcom.com> Patchwork: http://patchwork.linux-mips.org/patch/4460 Signed-off-by: John Crispin <blogic@openwrt.org>
2012-08-23MIPS: Netlogic: Add support for built in DTBJayachandran C1-1/+11
Provide a config option to embed a device tree for XLP evaluation boards. This DTB will be used if the firmware does not pass in a device tree pointer. Signed-off-by: Jayachandran C <jayachandranc@netlogicmicro.com> Patchwork: http://patchwork.linux-mips.org/patch/4103/ Signed-off-by: John Crispin <blogic@openwrt.org>
2012-08-23MIPS: Netlogic: Move serial ports to device treeJayachandran C2-109/+1
Add the serial ports to the device tree and remove the platform code for adding them. Signed-off-by: Jayachandran C <jayachandranc@netlogicmicro.com> Patchwork: http://patchwork.linux-mips.org/patch/4098/ Signed-off-by: John Crispin <blogic@openwrt.org>
2012-08-23MIPS: Netlogic: merge of.c into setup.cJayachandran C3-35/+20
Move the function device_tree_init() from netlogic/xlp/of.c to setup.c, and remove the wrapper functions reserve_mem_mach() and free_mem_mach(). Remove file netlogic/xlp/of.c, and the Makefile entry for it. Signed-off-by: Jayachandran C <jayachandranc@netlogicmicro.com> Patchwork: http://patchwork.linux-mips.org/patch/4097/ Signed-off-by: John Crispin <blogic@openwrt.org>
2012-07-25Merge branches 'next/generic', 'next/alchemy', 'next/bcm63xx', ↵Ralf Baechle6-1/+229
'next/cavium', 'next/jz4740', 'next/lantiq', 'next/loongson1b' and 'next/netlogic' into mips-for-linux-next
2012-07-24MIPS: Netlogic: Add XLP SoC devices in FDTGanesan Ramalingam1-0/+16
Probe and add devices on SoC "simple-bus" on startup. This will in turn add devices like I2C controller that are specified in the device tree under 'soc'. Signed-off-by: Ganesan Ramalingam <ganesanr@broadcom.com> Signed-off-by: Jayachandran C <jayachandranc@netlogicmicro.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/3762/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-24MIPS: Netlogic: Add IRQ mappings for more devicesJayachandran C1-0/+12
Add IRT to IRQ translation for the MMC and I2C IRQs. Signed-off-by: Jayachandran C <jayachandranc@netlogicmicro.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/3761/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-24MIPS: Netlogic: USB support for XLPGanesan Ramalingam4-1/+150
The XLP USB controller appears as a device on the internal SoC PCIe bus, the block has 2 EHCI blocks and 4 OHCI blocks. Change are to: * Add files netlogic/xlp/usb-init.c and asm/netlogic/xlp-hal/usb.h to initialize the USB controller and define PCI fixups. The PCI fixups are to setup interrupts and DMA mask. * Update include/asm/xlp-hal/{iomap.h,pic.h,xlp.h} to add interrupt mapping for EHCI/OHCI interrupts. Signed-off-by: Ganesan Ramalingam <ganesanr@netlogicmicro.com> Signed-off-by: Jayachandran C <jayachandranc@netlogicmicro.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/3756/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-24MIPS: Netlogic: XLP PCIe controller support.Ganesan Ramalingam1-0/+16
Adds support for the XLP on-chip PCIe controller. On XLP, the on-chip devices(including the 4 PCIe links) appear in the PCIe configuration space of the XLP as PCI devices. The changes are to initialize and register the PCIe controller, enable hardware byte swap in the PCIe IO and MEM space, and to enable PCIe interrupts. Signed-off-by: Ganesan Ramalingam <ganesanr@netlogicmicro.com> Signed-off-by: Jayachandran C <jayachandranc@netlogicmicro.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/3760/ Patchwork: https://patchwork.linux-mips.org/patch/4104/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-23MIPS: Prune some target specific code out of prom.cDavid Daney2-0/+35
This code is not common enough to be in a shared file. It is also not used by any existing boards, so just remove it. [ralf@linux-mips.org: Dropped removal of irq_create_of_mapping which was already removed by abd2363f6a5f1030b935e0bdc15cf917313b3b10 [irq_domain/mips: Allow irq_domain on MIPS]. Moved device_tree_init() and dependencies to its sole user, the XLP code.] Signed-off-by: David Daney <david.daney@cavium.com> Cc: linux-mips@linux-mips.org Cc: devicetree-discuss@lists.ozlabs.org Cc: grant.likely@secretlab.ca Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/2946/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-03MIPS: Netlogic: Fix TLB size of boot CPU.Jayachandran C1-1/+7
Starting other threads in the core will change the number of TLB entries of a CPU. Re-calculate current_cpu_data.tlbsize on the boot cpu after enabling and waking up other threads. The secondary CPUs do not need this logic because the threads are enabled on the secondary cores at wakeup and before cpu_probe. Signed-off-by: Jayachandran C <jayachandranc@netlogicmicro.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/3751/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-12-08MIPS: Netlogic: Add support for XLP 3XX coresJayachandran C1-10/+16
Add new processor ID to asm/cpu.h and kernel/cpu-probe.c. Update to new CPU frequency detection code which works on XLP 3XX and 8XX. Signed-off-by: Jayachandran C <jayachandranc@netlogicmicro.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2971/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-12-08MIPS: Netlogic: Merge some of XLR/XLP wakup codeJayachandran C4-288/+28
Create a common NMI and reset handler in smpboot.S and use this for both XLR and XLP. In the earlier code, the woken up CPUs would busy wait until released, switch this to wakeup by NMI. The initial wakeup code or XLR and XLP are differ since they are started from different bootloaders (XLP from u-boot and XLR from netlogic bootloader). But in both platforms the woken up CPUs wait and are released by sending an NMI. Add support for starting XLR and XLP in 1/2/4 threads per core. Signed-off-by: Jayachandran C <jayachandranc@netlogicmicro.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2970/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-12-08MIPS: Netlogic: Add XLP makefiles and configJayachandran C1-0/+2
- Add CPU_XLP and NLM_XLR_BOARD to arch/mips/Kconfig for Netlogic XLP boards - Update mips Makefiles to add XLP Signed-off-by: Jayachandran C <jayachandranc@netlogicmicro.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2968/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-12-08MIPS: Netlogic: Add XLP platform files for XLP SoCJayachandran C5-0/+680
- Update common files to support XLP. - Add arch/mips/include/asm/netlogic/xlp-hal for register definitions and access macros - Add arch/mips/netlogic/xlp/ for XLP specific files. Signed-off-by: Jayachandran C <jayachandranc@netlogicmicro.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2967/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-02-13 06:27:45 +0300