summaryrefslogtreecommitdiff
path: root/arch/mips/mm/tlbex.c
AgeCommit message (Collapse)AuthorFilesLines
2024-02-20MIPS: tlbex: Use GPR number macrosJiaxun Yang1-99/+97
Use GPR number macros in uasm code generation parts to reduce code duplication. No functional change. Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2024-02-20MIPS: Unify define of CP0 registers for uasm codeJiaxun Yang1-17/+1
Definitions of uasm variant of CP0 registers are unified to mipsregs.h, so they lay together with uasm variant of the code. Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2024-01-08MIPS: Fix typosBjorn Helgaas1-2/+2
Fix typos, most reported by "codespell arch/mips". Only touches comments, no code changes. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: linux-mips@vger.kernel.org Reviewed-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2023-08-25mips: implement the new page table range APIMatthew Wilcox (Oracle)1-1/+1
Rename _PFN_SHIFT to PFN_PTE_SHIFT. Convert a few places to call set_pte() instead of set_pte_at(). Add set_ptes(), update_mmu_cache_range(), flush_icache_pages() and flush_dcache_folio(). Change the PG_arch_1 (aka PG_dcache_dirty) flag from being per-page to per-folio. Link: https://lkml.kernel.org/r/20230802151406.3735276-18-willy@infradead.org Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Acked-by: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-20MIPS: mm: Remove special handling for OCTEON CPUsThomas Bogendoerfer1-20/+4
Macro cpu_has_mips_r2_exec_hazard correctly handles OCTEON CPUs, so we don't need the extra switch cases for them. Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2022-08-07Merge tag 'mips_6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linuxLinus Torvalds1-37/+2
Pull MIPS updates from Thomas Bogendoerfer: - added support for Netgear WNR3500L v2 - removed support for VR41xx SoC and platforms based on it - cleanups and fixes * tag 'mips_6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (25 commits) MIPS: tlbex: Explicitly compare _PAGE_NO_EXEC against 0 Revert "MIPS: octeon: Remove vestiges of CONFIG_CAVIUM_RESERVE32" MIPS: Introduce CAVIUM_RESERVE32 Kconfig option MIPS: msi-octeon: eliminate kernel-doc warnings MIPS: Fix comment typo MIPS: BMIPS: Utilize cfe_die() for invalid DTB MIPS: CFE: Add cfe_die() MIPS: Fixed __debug_virt_addr_valid() MIPS: BCM47XX: Add support for Netgear WNR3500L v2 MIPS: Remove VR41xx support MIPS: dts: align gpio-key node names with dtschema MIPS: dts: correct gpio-keys names and properties MIPS: cpuinfo: Fix a warning for CONFIG_CPUMASK_OFFSTACK MIPS: Make phys_to_virt utilize __va() MIPS: vdso: Utilize __pa() for gic_pfn MIPS: mm: Use the bitmap API to allocate bitmaps MIPS: math-emu: Use the bitmap API to allocate bitmaps MIPS: Loongson64: Fix section mismatch warning mips: cavium-octeon: Fix missing of_node_put() in octeon2_usb_clocks_start MIPS: mscc: ocelot: enable FDMA usage ...
2022-08-04MIPS: tlbex: Explicitly compare _PAGE_NO_EXEC against 0Nathan Chancellor1-2/+2
When CONFIG_XPA is enabled, Clang warns: arch/mips/mm/tlbex.c:629:24: error: converting the result of '<<' to a boolean; did you mean '(1 << _PAGE_NO_EXEC_SHIFT) != 0'? [-Werror,-Wint-in-bool-context] if (cpu_has_rixi && !!_PAGE_NO_EXEC) { ^ arch/mips/include/asm/pgtable-bits.h:174:28: note: expanded from macro '_PAGE_NO_EXEC' # define _PAGE_NO_EXEC (1 << _PAGE_NO_EXEC_SHIFT) ^ arch/mips/mm/tlbex.c:2568:24: error: converting the result of '<<' to a boolean; did you mean '(1 << _PAGE_NO_EXEC_SHIFT) != 0'? [-Werror,-Wint-in-bool-context] if (!cpu_has_rixi || !_PAGE_NO_EXEC) { ^ arch/mips/include/asm/pgtable-bits.h:174:28: note: expanded from macro '_PAGE_NO_EXEC' # define _PAGE_NO_EXEC (1 << _PAGE_NO_EXEC_SHIFT) ^ 2 errors generated. _PAGE_NO_EXEC can be '0' or '1 << _PAGE_NO_EXEC_SHIFT' depending on the build and runtime configuration, which is what the negation operators are trying to convey. To silence the warning, explicitly compare against 0 so the result of the '<<' operator is not implicitly converted to a boolean. According to its documentation, GCC enables -Wint-in-bool-context with -Wall but this warning is not visible when building the same configuration with GCC. It appears GCC only warns when compiling C++, not C, although the documentation makes no note of this: https://godbolt.org/z/x39q3brxf Reported-by: Sudip Mukherjee (Codethink) <sudipm.mukherjee@gmail.com> Signed-off-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2022-07-18mips: rename PGD_ORDER to PGD_TABLE_ORDERMike Rapoport1-6/+6
This is the order of the page table allocation, not the order of a PGD. While at it remove unused defintion of _PGD_ORDER in asm-offsets. Link: https://lkml.kernel.org/r/20220703141203.147893-7-rppt@kernel.org Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Dinh Nguyen <dinguyen@kernel.org> Cc: Guo Ren <guoren@kernel.org> Cc: Helge Deller <deller@gmx.de> Cc: Huacai Chen <chenhuacai@kernel.org> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Xuerui Wang <kernel@xen0n.name> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-07-18mips: drop definitions of PTE_ORDERMike Rapoport1-1/+1
This is the order of the page table allocation, not the order of a PTE. Since its always hardwired to 0, simply drop it. Link: https://lkml.kernel.org/r/20220703141203.147893-6-rppt@kernel.org Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Dinh Nguyen <dinguyen@kernel.org> Cc: Guo Ren <guoren@kernel.org> Cc: Helge Deller <deller@gmx.de> Cc: Huacai Chen <chenhuacai@kernel.org> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Xuerui Wang <kernel@xen0n.name> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-07-14MIPS: Remove VR41xx supportThomas Bogendoerfer1-35/+0
No (active) developer owns this hardware, so let's remove Linux support. Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2022-03-07MIPS: Sanitise Cavium switch cases in TLB handler synthesizersMaciej W. Rozycki1-13/+10
It makes no sense to fall through to `break'. Therefore reorder the switch statements so as to have the Cavium cases first, followed by the default case, which improves readability and pacifies code analysis tools. No change in semantics, assembly produced is exactly the same. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk> Fixes: bc431d2153cc ("MIPS: Fix fall-through warnings for Clang") Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2022-02-22MIPS: remove asm/war.hThomas Bogendoerfer1-1/+0
The major part for workaround handling has already moved to config options. This change replaces the remaining defines by already available config options and gets rid of war.h Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-10-24MIPS: Remove NETLOGIC supportThomas Bogendoerfer1-8/+1
No (active) developer owns this hardware, so let's remove Linux support. Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-07-13MIPS: Fix fall-through warnings for ClangGustavo A. R. Silva1-0/+2
Fix the following fallthrough warnings: arch/mips/mm/tlbex.c:1386:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough] arch/mips/mm/tlbex.c:2173:3: error: unannotated fall-through between switch labels [-Werror,-Wimplicit-fallthrough] Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/lkml/60edca25.k00ut905IFBjPyt5%25lkp@intel.com/ Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2021-03-14MIPS: clean up CONFIG_MIPS_PGD_C0_CONTEXT handlingHuang Pei1-4/+5
+. LOONGSON64 use 0x98xx_xxxx_xxxx_xxxx as xphys cached, instread of 0xa8xx_xxxx_xxxx_xxxx +. let CONFIG_MIPS_PGD_C0_CONTEXT depend on 64bit +. cast CAC_BASE into u64 to silence warning on MIPS32 CP0 Context has enough room for wraping pgd into its 41-bit PTEBase field. +. For XPHYS, the trick is that pgd is 4kB aligned, and the PABITS <= 53, only save 53 - 12 = 41 bits, aka : bit[63:59] | 0000 00 | bit[53:12] | 0000 0000 0000 +. for CKSEG0, only save 29 - 12 = 17 bits when switching pgd, only need to save bit[53:12] or bit[28:12] into CP0 Context's bit[63:23], see folling asm generated at run time tlbmiss_handler_setup_pgd: .set push .set noreorder dsra a2, a0, 29 move a3, a0 dins a0, zero, 29, 35 daddiu a2, a2, 4 //for CKSEG0, a2 from 0xfffffffffffffffc //into 0 movn a0, a3, a2 dsll a0, a0, 11 jr ra dmtc0 a0, CP0_CONTEXT .set pop when using it on page walking dmfc0 k0, CP0_CONTEXT dins k0, zero, 0, 23 // zero badv2 ori k0, k0, (CAC_BASE >> 53) // *prefix* with bit[63:59] drotr k0, k0, 11 // kick it in the right place Signed-off-by: Huang Pei <huangpei@loongson.cn> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-01-22Revert "MIPS: Remove unused R4300 CPU support"Lauri Kasanen1-0/+1
This reverts commit f9065b54d437c4660e3d974ad9ce5188c068cd76. We're adding Nintendo 64 support, so the VR4300 is no longer unused. Signed-off-by: Lauri Kasanen <cand@gmx.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-09-07MIPS: Get rid of BCM1250_M3_WARThomas Bogendoerfer1-1/+5
BCM1250_M3_WAR is depending on CONFIG_CONFIG_SB1_PASS_2_WORKAROUNDS. So using this option directly lets and remove define. Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-09-07MIPS: Convert R10000_LLSC_WAR info a config optionThomas Bogendoerfer1-1/+1
Use a new config option to enabel R1000_LLSC workaound and remove define from different war.h files. Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-06-09mm: reorder includes after introduction of linux/pgtable.hMike Rapoport1-1/+1
The replacement of <asm/pgrable.h> with <linux/pgtable.h> made the include of the latter in the middle of asm includes. Fix this up with the aid of the below script and manual adjustments here and there. import sys import re if len(sys.argv) is not 3: print "USAGE: %s <file> <header>" % (sys.argv[0]) sys.exit(1) hdr_to_move="#include <linux/%s>" % sys.argv[2] moved = False in_hdrs = False with open(sys.argv[1], "r") as f: lines = f.readlines() for _line in lines: line = _line.rstrip(' ') if line == hdr_to_move: continue if line.startswith("#include <linux/"): in_hdrs = True elif not moved and in_hdrs: moved = True print hdr_to_move print line Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Cain <bcain@codeaurora.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Ungerer <gerg@linux-m68k.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Mark Salter <msalter@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Nick Hu <nickhu@andestech.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vincent Chen <deanbo422@gmail.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: http://lkml.kernel.org/r/20200514170327.31389-4-rppt@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09mm: introduce include/linux/pgtable.hMike Rapoport1-1/+1
The include/linux/pgtable.h is going to be the home of generic page table manipulation functions. Start with moving asm-generic/pgtable.h to include/linux/pgtable.h and make the latter include asm/pgtable.h. Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Cain <bcain@codeaurora.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Ungerer <gerg@linux-m68k.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Mark Salter <msalter@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Nick Hu <nickhu@andestech.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vincent Chen <deanbo422@gmail.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: http://lkml.kernel.org/r/20200514170327.31389-3-rppt@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-05-07MIPS: Use fallthrough for arch/mipsLiangliang Huang1-1/+1
Convert the various /* fallthrough */ comments to the pseudo-keyword fallthrough; Done via script: https://lore.kernel.org/lkml/b56602fcf79f849e733e7b521bb0e17895d390fa.1582230379.git.joe@perches.com/ Signed-off-by: Liangliang Huang <huangll@lemote.com> Reviewed-by: Huacai Chen <chenhc@lemote.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-03-25MIPS/tlbex: Fix LDDIR usage in setup_pw() for Loongson-3Huacai Chen1-1/+4
LDDIR/LDPTE is Loongson-3's acceleration for Page Table Walking. If BD (Base Directory, the 4th page directory) is not enabled, then GDOffset is biased by BadVAddr[63:62]. So, if GDOffset (aka. BadVAddr[47:36] for Loongson-3) is big enough, "0b11(BadVAddr[63:62])|BadVAddr[47:36]|...." can far beyond pg_swapper_dir. This means the pg_swapper_dir may NOT be accessed by LDDIR correctly, so fix it by set PWDirExt in CP0_PWCtl. Cc: <stable@vger.kernel.org> Signed-off-by: Pei Huang <huangpei@loongson.cn> Signed-off-by: Huacai Chen <chenhc@lemote.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2019-11-02Merge tag 'mips_fixes_5.4_3' into mips-nextPaul Burton1-8/+15
Pull in mips-fixes primarily to gain build fixes in order to allow better testing of mips-next. A few MIPS fixes: - Fix VDSO time-related function behavior for systems where we need to fall back to syscalls, but were instead returning bogus results. - A fix to TLB exception handlers for Cavium Octeon systems where they would inadvertently clobber the $1/$at register. - A build fix for bcm63xx configurations. - Switch to using my @kernel.org email address. Signed-off-by: Paul Burton <paulburton@kernel.org>
2019-11-01MIPS: Loongson64: Rename CPU TYPESJiaxun Yang1-3/+3
CPU_LOONGSON2 -> CPU_LOONGSON2EF CPU_LOONGSON3 -> CPU_LOONGSON64 As newer loongson-2 products (2G/2H/2K1000) can share kernel implementation with loongson-3 while 2E/2F are less similar with other LOONGSON64 products. Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Paul Burton <paulburton@kernel.org> Cc: linux-mips@vger.kernel.org Cc: chenhc@lemote.com Cc: paul.burton@mips.com
2019-10-24MIPS: tlbex: Fix build_restore_pagemask KScratch restorePaul Burton1-8/+15
build_restore_pagemask() will restore the value of register $1/$at when its restore_scratch argument is non-zero, and aims to do so by filling a branch delay slot. Commit 0b24cae4d535 ("MIPS: Add missing EHB in mtc0 -> mfc0 sequence.") added an EHB instruction (Execution Hazard Barrier) prior to restoring $1 from a KScratch register, in order to resolve a hazard that can result in stale values of the KScratch register being observed. In particular, P-class CPUs from MIPS with out of order execution pipelines such as the P5600 & P6600 are affected. Unfortunately this EHB instruction was inserted in the branch delay slot causing the MFC0 instruction which performs the restoration to no longer execute along with the branch. The result is that the $1 register isn't actually restored, ie. the TLB refill exception handler clobbers it - which is exactly the problem the EHB is meant to avoid for the P-class CPUs. Similarly build_get_pgd_vmalloc() will restore the value of $1/$at when its mode argument equals refill_scratch, and suffers from the same problem. Fix this by in both cases moving the EHB earlier in the emitted code. There's no reason it needs to immediately precede the MFC0 - it simply needs to be between the MTC0 & MFC0. This bug only affects Cavium Octeon systems which use build_fast_tlb_refill_handler(). Signed-off-by: Paul Burton <paulburton@kernel.org> Fixes: 0b24cae4d535 ("MIPS: Add missing EHB in mtc0 -> mfc0 sequence.") Cc: Dmitry Korotin <dkorotin@wavecomp.com> Cc: stable@vger.kernel.org # v3.15+ Cc: linux-mips@vger.kernel.org Cc: linux-kernel@vger.kernel.org
2019-09-03MIPS: tlbex: Remove cpu_has_local_ebasePaul Burton1-7/+2
The cpu_has_local_ebase macro is, confusingly, not used to indicate whether the EBase register is local to a CPU or not. Instead it indicates whether we want to generate the TLB refill exception vector each time a CPU is brought online. Doing this makes little sense on any system, since we always use the same value for EBase & thus we cannot have different TLB refill exception handlers per CPU. Regenerating the code is not only pointless but also can be actively harmful, as commit 8759934e2b6b ("MIPS: Build uasm-generated code only once to avoid CPU Hotplug problem") described. That commit introduced cpu_has_local_ebase to disable the handler regeneration for Loongson machines, but this is by no means a Loongson-specific problem. Remove cpu_has_local_ebase & simply generate the TLB refill handler once during boot, just like the rest of the TLB exception handlers. Signed-off-by: Paul Burton <paul.burton@mips.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Cc: linux-mips@vger.kernel.org
2019-09-03MIPS: tlbex: Simplify r3k checkPaul Burton1-30/+22
We already know whether a CPU has r3k style exceptions, including TLB exceptions, by checking cpu_has_3kex. Remove the list of CPU types in build_tlb_refill_handler() & check cpu_has_3kex instead. Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: linux-mips@vger.kernel.org
2019-08-12MIPS: tlbex: Explicitly cast _PAGE_NO_EXEC to a booleanNathan Chancellor1-1/+1
clang warns: arch/mips/mm/tlbex.c:634:19: error: use of logical '&&' with constant operand [-Werror,-Wconstant-logical-operand] if (cpu_has_rixi && _PAGE_NO_EXEC) { ^ ~~~~~~~~~~~~~ arch/mips/mm/tlbex.c:634:19: note: use '&' for a bitwise operation if (cpu_has_rixi && _PAGE_NO_EXEC) { ^~ & arch/mips/mm/tlbex.c:634:19: note: remove constant to silence this warning if (cpu_has_rixi && _PAGE_NO_EXEC) { ~^~~~~~~~~~~~~~~~ 1 error generated. Explicitly cast this value to a boolean so that clang understands we intend for this to be a non-zero value. Fixes: 00bf1c691d08 ("MIPS: tlbex: Avoid placing software PTE bits in Entry* PFN fields") Link: https://github.com/ClangBuiltLinux/linux/issues/609 Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: linux-mips@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: clang-built-linux@googlegroups.com
2019-07-24MIPS: Remove unused R8000 CPU supportPaul Burton1-4/+0
Our R8000 CPU support can only be included if a system selects CONFIG_SYS_HAS_CPU_R8000. No system does, making all R8000-related CPU support dead code. Remove it. Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: linux-mips@vger.kernel.org
2019-07-24MIPS: Remove unused R5432 CPU supportPaul Burton1-1/+0
Our R5432 CPU support can only be included if a system selects CONFIG_SYS_HAS_CPU_R5432. No system does, making all R5432-related CPU support dead code. Remove it. Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: linux-mips@vger.kernel.org
2019-07-24MIPS: Remove unused R4300 CPU supportPaul Burton1-1/+0
Our R4300 CPU support can only be included if a system selects CONFIG_SYS_HAS_CPU_R4300. No system does, making all R4300-related CPU support dead code. Remove it. Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: linux-mips@vger.kernel.org
2019-07-22MIPS: Rename JZRISC to XBURSTPaul Cercueil1-1/+1
The real name of the CPU present in the JZ line of SoCs from Ingenic is XBurst, not JZRISC. Signed-off-by: Paul Cercueil <paul@crapouillou.net> [paul.burton@mips.com: Leave /proc/cpuinfo string as-is.] Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: od@zcrc.me Cc: linux-mips@vger.kernel.org Cc: linux-kernel@vger.kernel.org
2019-06-24MIPS: Add missing EHB in mtc0 -> mfc0 sequence.Dmitry Korotin1-9/+20
Add a missing EHB (Execution Hazard Barrier) in mtc0 -> mfc0 sequence. Without this execution hazard barrier it's possible for the value read back from the KScratch register to be the value from before the mtc0. Reproducible on P5600 & P6600. The hazard is documented in the MIPS Architecture Reference Manual Vol. III: MIPS32/microMIPS32 Privileged Resource Architecture (MD00088), rev 6.03 table 8.1 which includes: Producer | Consumer | Hazard ----------|----------|---------------------------- mtc0 | mfc0 | any coprocessor 0 register Signed-off-by: Dmitry Korotin <dkorotin@wavecomp.com> [paul.burton@mips.com: - Commit message tweaks. - Add Fixes tags. - Mark for stable back to v3.15 where P5600 support was introduced.] Signed-off-by: Paul Burton <paul.burton@mips.com> Fixes: 3d8bfdd03072 ("MIPS: Use C0_KScratch (if present) to hold PGD pointer.") Fixes: 829dcc0a956a ("MIPS: Add MIPS P5600 probe support") Cc: linux-mips@vger.kernel.org Cc: stable@vger.kernel.org # v3.15+
2019-02-04MIPS: Loongson: Introduce and use loongson_llsc_mb()Huacai Chen1-0/+10
On the Loongson-2G/2H/3A/3B there is a hardware flaw that ll/sc and lld/scd is very weak ordering. We should add sync instructions "before each ll/lld" and "at the branch-target between ll/sc" to workaround. Otherwise, this flaw will cause deadlock occasionally (e.g. when doing heavy load test with LTP). Below is the explaination of CPU designer: "For Loongson 3 family, when a memory access instruction (load, store, or prefetch)'s executing occurs between the execution of LL and SC, the success or failure of SC is not predictable. Although programmer would not insert memory access instructions between LL and SC, the memory instructions before LL in program-order, may dynamically executed between the execution of LL/SC, so a memory fence (SYNC) is needed before LL/LLD to avoid this situation. Since Loongson-3A R2 (3A2000), we have improved our hardware design to handle this case. But we later deduce a rarely circumstance that some speculatively executed memory instructions due to branch misprediction between LL/SC still fall into the above case, so a memory fence (SYNC) at branch-target (if its target is not between LL/SC) is needed for Loongson 3A1000, 3B1500, 3A2000 and 3A3000. Our processor is continually evolving and we aim to to remove all these workaround-SYNCs around LL/SC for new-come processor." Here is an example: Both cpu1 and cpu2 simutaneously run atomic_add by 1 on same atomic var, this bug cause both 'sc' run by two cpus (in atomic_add) succeed at same time('sc' return 1), and the variable is only *added by 1*, sometimes, which is wrong and unacceptable(it should be added by 2). Why disable fix-loongson3-llsc in compiler? Because compiler fix will cause problems in kernel's __ex_table section. This patch fix all the cases in kernel, but: +. the fix at the end of futex_atomic_cmpxchg_inatomic is for branch-target of 'bne', there other cases which smp_mb__before_llsc() and smp_llsc_mb() fix the ll and branch-target coincidently such as atomic_sub_if_positive/ cmpxchg/xchg, just like this one. +. Loongson 3 does support CONFIG_EDAC_ATOMIC_SCRUB, so no need to touch edac.h +. local_ops and cmpxchg_local should not be affected by this bug since only the owner can write. +. mips_atomic_set for syscall.c is deprecated and rarely used, just let it go Signed-off-by: Huacai Chen <chenhc@lemote.com> Signed-off-by: Huang Pei <huangpei@loongson.cn> [paul.burton@mips.com: - Simplify the addition of -mno-fix-loongson3-llsc to cflags, and add a comment describing why it's there. - Make loongson_llsc_mb() a no-op when CONFIG_CPU_LOONGSON3_WORKAROUNDS=n, rather than a compiler memory barrier. - Add a comment describing the bug & how loongson_llsc_mb() helps in asm/barrier.h.] Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: ambrosehua@gmail.com Cc: Steven J . Hill <Steven.Hill@cavium.com> Cc: linux-mips@linux-mips.org Cc: Fuxin Zhang <zhangfx@lemote.com> Cc: Zhangjin Wu <wuzhangjin@gmail.com> Cc: Li Xuefeng <lixuefeng@loongson.cn> Cc: Xu Chenghua <xuchenghua@loongson.cn>
2018-12-04mips: annotate implicit fall throughsMathieu Malaterre1-0/+1
There is a plan to build the kernel with -Wimplicit-fallthrough and these places in the code produced warnings. Fix them up. This patch produces no change in behaviour, but should be reviewed in case these are actually bugs not intentional fallthoughs. Signed-off-by: Mathieu Malaterre <malat@debian.org> Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: Kees Cook <keescook@google.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: linux-mips@vger.kernel.org Cc: linux-kernel@vger.kernel.org
2018-08-11MIPS: Consistently declare TLB functionsPaul Burton1-60/+40
Since at least the beginning of the git era we've declared our TLB exception handling functions inconsistently. They're actually functions, but we declare them as arrays of u32 where each u32 is an encoded instruction. This has always been the case for arch/mips/mm/tlbex.c, and has also been true for arch/mips/kernel/traps.c since commit 86a1708a9d54 ("MIPS: Make tlb exception handler definitions and declarations match.") which aimed for consistency but did so by consistently making the our C code inconsistent with our assembly. This is all usually harmless, but when using GCC 7 or newer to build a kernel targeting microMIPS (ie. CONFIG_CPU_MICROMIPS=y) it becomes problematic. With microMIPS bit 0 of the program counter indicates the ISA mode. When bit 0 is zero instructions are decoded using the standard MIPS32 or MIPS64 ISA. When bit 0 is one instructions are decoded using microMIPS. This means that function pointers become odd - their least significant bit is one for microMIPS code. We work around this in cases where we need to access code using loads & stores with our msk_isa16_mode() macro which simply clears bit 0 of the value it is given: #define msk_isa16_mode(x) ((x) & ~0x1) For example we do this for our TLB load handler in build_r4000_tlb_load_handler(): u32 *p = (u32 *)msk_isa16_mode((ulong)handle_tlbl); We then write code to p, expecting it to be suitably aligned (our LEAF macro aligns functions on 4 byte boundaries, so (ulong)handle_tlbl will give a value one greater than a multiple of 4 - ie. the start of a function on a 4 byte boundary, with the ISA mode bit 0 set). This worked fine up to GCC 6, but GCC 7 & onwards is smart enough to presume that handle_tlbl which we declared as an array of u32s must be aligned sufficiently that bit 0 of its address will never be set, and as a result optimize out msk_isa16_mode(). This leads to p having an address with bit 0 set, and when we go on to attempt to store code at that address we take an address error exception due to the unaligned memory access. This leads to an exception prior to the kernel having configured its own exception handlers, so we jump to whatever handlers the bootloader configured. In the case of QEMU this results in a silent hang, since it has no useful general exception vector. Fix this by consistently declaring our TLB-related functions as functions. For handle_tlbl(), handle_tlbs() & handle_tlbm() we do this in asm/tlbex.h & we make use of the existing declaration of tlbmiss_handler_setup_pgd() in asm/mmu_context.h. Our TLB handler generation code in arch/mips/mm/tlbex.c is adjusted to deal with these definitions, in most cases simply by casting the function pointers to u32 pointers. This allows us to include asm/mmu_context.h in arch/mips/mm/tlbex.c to get the definitions of tlbmiss_handler_setup_pgd & pgd_current, removing some needless duplication. Consistently using msk_isa16_mode() on function pointers means we no longer need the tlbmiss_handler_setup_pgd_start symbol so that is removed entirely. Now that we're declaring our functions as functions GCC stops optimizing out msk_isa16_mode() & a microMIPS kernel built with either GCC 7.3.0 or 8.1.0 boots successfully. Signed-off-by: Paul Burton <paul.burton@mips.com>
2018-08-11MIPS: Export tlbmiss_handler_setup_pgd near its definitionPaul Burton1-1/+0
We export tlbmiss_handler_setup_pgd in arch/mips/mm/tlbex.c close to a declaration of it, rather than close to its definition as is standard. We've supported exporting symbols in assembly code since commit 22823ab419d8 ("EXPORT_SYMBOL() for asm"), so move the export to follow the function's (stub) definition. Signed-off-by: Paul Burton <paul.burton@mips.com>
2018-08-07MIPS: Avoid using array as parameter to write_c0_kpgd()Paul Burton1-1/+1
Passing an array (swapper_pg_dir) as the argument to write_c0_kpgd() in setup_pw() will become problematic if we modify __write_64bit_c0_split() to cast its val argument to unsigned long long, because for 32-bit kernel builds the size of a pointer will differ from the size of an unsigned long long. This would fall foul of gcc's pointer-to-int-cast diagnostic. Cast the value to a long, which should be the same width as the pointer that we ultimately want & will be sign extended if required to the unsigned long long that __write_64bit_c0_split() ultimately needs. Signed-off-by: Paul Burton <paul.burton@mips.com>
2017-08-29MIPS: Remove unused R6000 supportPaul Burton1-5/+0
The kernel contains a small amount of incomplete code aimed at supporting old R6000 CPUs. This is: - Unused, as no machine selects CONFIG_SYS_HAS_CPU_R6000. - Broken, since there are glaring errors such as r6000_fpu.S moving the FCSR register to t1, then ignoring it & instead saving t0 into struct sigcontext... - A maintenance headache, since it's code that nobody can test which nevertheless imposes constraints on code which it shares with other machines. Remove this incomplete & broken R6000 CPU support in order to clean up and in preparation for changes which will no longer need to consider dragging the pretense of R6000 support along with them. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/16236/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-06-29MIPS: Use current_cpu_type() in m4kc_tlbp_war()Paul Burton1-2/+1
Use current_cpu_type() to check for 4Kc processors instead of checking the PRID directly. This will allow for the 4Kc case to be optimised out of kernels that can't run on 4KC processors, thanks to __get_cpu_type() and its unreachable() call. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/16205/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-06-29MIPS: Handle tlbex-tlbp race conditionPaul Burton1-1/+37
In systems where there are multiple actors updating the TLB, the potential exists for a race condition wherein a CPU hits a TLB exception but by the time it reaches a TLBP instruction the affected TLB entry may have been replaced. This can happen if, for example, a CPU shares the TLB between hardware threads (VPs) within a core and one of them replaces the entry that another has just taken a TLB exception for. We handle this race in the case of the Hardware Table Walker (HTW) being the other actor already, but didn't take into account the potential for multiple threads racing. Include the code for aborting TLB exception handling in affected multi-threaded systems, those being the I6400 & I6500 CPUs which share TLB entries between VPs. In the case of using RiXi without dedicated exceptions we have never handled this race even for HTW. This patch adds WARN()s to these cases which ought never to be hit because all CPUs with either HTW or shared FTLB RAMs also include dedicated RiXi exceptions, but the WARN()s will ensure this is always the case. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/16203/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-04-10MIPS: Add 48-bit VA space (and 4-level page tables) for 4K pages.Alex Belits1-0/+22
Some users must have 4K pages while needing a 48-bit VA space size. The cleanest way do do this is to go to a 4-level page table for this case. Each page table level using order-0 pages adds 9 bits to the VA size (at 4K pages, so for four levels we get 9 * 4 + 12 == 48-bits. For the 4K page size case only we add support functions for the PUD level of the page table tree, also the TLB exception handlers get an extra level of tree walk. [david.daney@cavium.com: Forward port to v4.10.] [david.daney@cavium.com: Forward port to v4.11.] Signed-off-by: Alex Belits <alex.belits@cavium.com> Signed-off-by: David Daney <david.daney@cavium.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: Alex Belits <alex.belits@cavium.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/15312/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-03-21MIPS: Flush wrong invalid FTLB entry for huge pageHuacai Chen1-4/+21
On VTLB+FTLB platforms (such as Loongson-3A R2), FTLB's pagesize is usually configured the same as PAGE_SIZE. In such a case, Huge page entry is not suitable to write in FTLB. Unfortunately, when a huge page is created, its page table entries haven't created immediately. Then the TLB refill handler will fetch an invalid page table entry which has no "HUGE" bit, and this entry may be written to FTLB. Since it is invalid, TLB load/store handler will then use tlbwi to write the valid entry at the same place. However, the valid entry is a huge page entry which isn't suitable for FTLB. Our solution is to modify build_huge_handler_tail. Flush the invalid old entry (whether it is in FTLB or VTLB, this is in order to reduce branches) and use tlbwr to write the valid new entry. Signed-off-by: Rui Wang <wangr@lemote.com> Signed-off-by: Huacai Chen <chenhc@lemote.com> Cc: John Crispin <john@phrozen.org> Cc: Steven J . Hill <Steven.Hill@caviumnetworks.com> Cc: Fuxin Zhang <zhangfx@lemote.com> Cc: Zhangjin Wu <wuzhangjin@gmail.com> Cc: Huacai Chen <chenhc@lemote.com> Cc: linux-mips@linux-mips.org Cc: stable@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/15754/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-02-13Merge tag 'mips_kvm_4.11_1' into mips-for-linux-nextJames Hogan1-18/+20
MIPS dependencies for KVM Miscellaneous MIPS architecture changes depended on by the MIPS KVM changes in the KVM tree. - Move pgd_alloc() out of header. - Exports so KVM can access page table management and TLBEX functions. - Add return errors to protected cache ops.
2017-02-03MIPS: Export some tlbex internals for KVM to useJames Hogan1-17/+16
Export to TLB exception code generating functions so that KVM can construct a fast TLB refill handler for guest context without reinventing the wheel quite so much. Signed-off-by: James Hogan <james.hogan@imgtec.com> Acked-by: Ralf Baechle <ralf@linux-mips.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Radim Krčmář" <rkrcmar@redhat.com> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org
2017-02-03MIPS: Export pgd/pmd symbols for KVMJames Hogan1-1/+4
Export pmd_init(), invalid_pmd_table and tlbmiss_handler_setup_pgd to GPL kernel modules so that MIPS KVM can use the inline page table management functions and switch between page tables: - pmd_init() will be used directly by KVM to initialise newly allocated pmd tables with invalid lower level table pointers. - invalid_pmd_table is used by pud_present(), pud_none(), and pud_clear(), which KVM will use to test and clear pud entries. - tlbmiss_handler_setup_pgd() will be called by KVM entry code to switch to the appropriate GVA page tables. Signed-off-by: James Hogan <james.hogan@imgtec.com> Acked-by: Ralf Baechle <ralf@linux-mips.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Radim Krčmář" <rkrcmar@redhat.com> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org
2017-01-03MIPS: tlbex: Clear ISA bit when writing to handle_tlb{l,m,s}Paul Burton1-3/+3
When generating TLB exception handling code we write to memory reserved at the handle_tlbl, handle_tlbm & handle_tlbs symbols. Up until now the ISA bit has always been clear simply because the assembly code reserving the space for those functions places no instructions in them. In preparation for marking all LEAF functions as containing code, explicitly clear the ISA bit when calculating the addresses at which to write TLB exception handling code. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14507/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-08-06Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds1-1/+1
Pull MIPS updates from Ralf Baechle: "This is the main pull request for MIPS for 4.8. Also includes is a minor SSB cleanup as SSB code traditionally is merged through the MIPS tree: ATH25: - MIPS: Add default configuration for ath25 Boot: - For zboot, copy appended dtb to the end of the kernel - store the appended dtb address in a variable BPF: - Fix off by one error in offset allocation Cobalt code: - Fix typos Core code: - debugfs_create_file returns NULL on error, so don't use IS_ERR for testing for errors. - Fix double locking issue in RM7000 S-cache code. This would only affect RM7000 ARC systems on reboot. - Fix page table corruption on THP permission changes. - Use compat_sys_keyctl for 32 bit userspace on 64 bit kernels. David says, there are no compatibility issues raised by this fix. - Move some signal code around. - Rewrite r4k count/compare clockevent device registration such that min_delta_ticks/max_delta_ticks files are guaranteed to be initialized. - Only register r4k count/compare as clockevent device if we can assume the clock to be constant. - Fix MSA asm warnings in control reg accessors - uasm and tlbex fixes and tweaking. - Print segment physical address when EU=1. - Define AT_VECTOR_SIZE_ARCH for ARCH_DLINFO. - CP: Allow booting by VP other than VP 0 - Cache handling fixes and optimizations for r4k class caches - Add hotplug support for R6 processors - Cleanup hotplug bits in kconfig - traps: return correct si code for accessing nonmapped addresses - Remove cpu_has_safe_index_cacheops Lantiq: - Register IRQ handler for virtual IRQ number - Fix EIU interrupt loading code - Use the real EXIN count - Fix build error. Loongson 3: - Increase HPET_MIN_PROG_DELTA and decrease HPET_MIN_CYCLES Octeon: - Delete built-in DTB pruning code for D-Link DSR-1000N. - Clean up GPIO definitions in dlink_dsr-1000n.dts. - Add more LEDs to the DSR-100n DTS - Fix off by one in octeon_irq_gpio_map() - Typo fixes - Enable SATA by default in cavium_octeon_defconfig - Support readq/writeq() - Remove forced mappings of USB interrupts. - Ensure DMA descriptors are always in the low 4GB - Improve USB reset code for OCTEON II. Pistachio: - Add maintainers entry for pistachio SoC Support - Remove plat_setup_iocoherency Ralink: - Fix pwm UART in spis group pinmux. SSB: - Change bare unsigned to unsigned int to suit coding style Tools: - Fix reloc tool compiler warnings. Other: - Delete use of ARCH_WANT_OPTIONAL_GPIOLIB" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (61 commits) MIPS: mm: Fix definition of R6 cache instruction MIPS: tools: Fix relocs tool compiler warnings MIPS: Cobalt: Fix typo MIPS: Octeon: Fix typo MIPS: Lantiq: Fix build failure MIPS: Use CPHYSADDR to implement mips32 __pa MIPS: Octeon: Dlink_dsr-1000n.dts: add more leds. MIPS: Octeon: Clean up GPIO definitions in dlink_dsr-1000n.dts. MIPS: Octeon: Delete built-in DTB pruning code for D-Link DSR-1000N. MIPS: store the appended dtb address in a variable MIPS: ZBOOT: copy appended dtb to the end of the kernel MIPS: ralink: fix spis group pinmux MIPS: Factor o32 specific code into signal_o32.c MIPS: non-exec stack & heap when non-exec PT_GNU_STACK is present MIPS: Use per-mm page to execute branch delay slot instructions MIPS: Modify error handling MIPS: c-r4k: Use SMP calls for CM indexed cache ops MIPS: c-r4k: Avoid small flush_icache_range SMP calls MIPS: c-r4k: Local flush_icache_range cache op override MIPS: c-r4k: Split r4k_flush_kernel_vmap_range() ...
2016-08-04tree-wide: replace config_enabled() with IS_ENABLED()Masahiro Yamada1-5/+5
The use of config_enabled() against config options is ambiguous. In practical terms, config_enabled() is equivalent to IS_BUILTIN(), but the author might have used it for the meaning of IS_ENABLED(). Using IS_ENABLED(), IS_BUILTIN(), IS_MODULE() etc. makes the intention clearer. This commit replaces config_enabled() with IS_ENABLED() where possible. This commit is only touching bool config options. I noticed two cases where config_enabled() is used against a tristate option: - config_enabled(CONFIG_HWMON) [ drivers/net/wireless/ath/ath10k/thermal.c ] - config_enabled(CONFIG_BACKLIGHT_CLASS_DEVICE) [ drivers/gpu/drm/gma500/opregion.c ] I did not touch them because they should be converted to IS_BUILTIN() in order to keep the logic, but I was not sure it was the authors' intention. Link: http://lkml.kernel.org/r/1465215656-20569-1-git-send-email-yamada.masahiro@socionext.com Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Kees Cook <keescook@chromium.org> Cc: Stas Sergeev <stsp@list.ru> Cc: Matt Redfearn <matt.redfearn@imgtec.com> Cc: Joshua Kinard <kumba@gentoo.org> Cc: Jiri Slaby <jslaby@suse.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Borislav Petkov <bp@suse.de> Cc: Markos Chandras <markos.chandras@imgtec.com> Cc: "Dmitry V. Levin" <ldv@altlinux.org> Cc: yu-cheng yu <yu-cheng.yu@intel.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: Brian Gerst <brgerst@gmail.com> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Will Drewry <wad@chromium.org> Cc: Nikolay Martynov <mar.kolya@gmail.com> Cc: Huacai Chen <chenhc@lemote.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Cc: Rafal Milecki <zajec5@gmail.com> Cc: James Cowgill <James.Cowgill@imgtec.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Alex Smith <alex.smith@imgtec.com> Cc: Adam Buchbinder <adam.buchbinder@gmail.com> Cc: Qais Yousef <qais.yousef@imgtec.com> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Mikko Rapeli <mikko.rapeli@iki.fi> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Brian Norris <computersforpeace@gmail.com> Cc: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com> Cc: "Luis R. Rodriguez" <mcgrof@do-not-panic.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Ingo Molnar <mingo@redhat.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Roland McGrath <roland@hack.frob.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Kalle Valo <kvalo@qca.qualcomm.com> Cc: Viresh Kumar <viresh.kumar@linaro.org> Cc: Tony Wu <tung7970@gmail.com> Cc: Huaitong Han <huaitong.han@intel.com> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Juergen Gross <jgross@suse.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andrea Gelmini <andrea.gelmini@gelma.net> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Rabin Vincent <rabin@rab.in> Cc: "Maciej W. Rozycki" <macro@imgtec.com> Cc: David Daney <david.daney@cavium.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-24MIPS: tlbex: Avoid duplicated single_insn_swpdJames Hogan1-1/+1
The expression "uasm_in_compat_space_p(swpd) && !uasm_rel_lo(swpd)" is used twice in build_get_pgd_vmalloc64(), one of which is assigned to the local variable single_insn_swpd. Update the other use to just use single_insn_swpd instead to remove the duplication. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: David Daney <ddaney@caviumnetworks.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13779/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-01-07 07:41:37 +0300