summaryrefslogtreecommitdiff
path: root/arch/mips/boot/dts
AgeCommit message (Collapse)AuthorFilesLines
2022-04-27MIPS: mscc: jaguar2: rename pinctrl nodesMichael Walle3-13/+13
The pinctrl device tree binding will be converted to YAML format. Rename the pin nodes so they end with "-pins" to match the schema. Signed-off-by: Michael Walle <michael@walle.cc> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2022-04-27mips: dts: ralink: mt7621: remove defining gpio function for pin groupsArınç ÜNAL2-24/+0
All pin groups function as gpio unless set otherwise. Therefore, remove this unnecessary binding. Tested on UniElec U7621-06-16M on OpenWrt. Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com> Reviewed-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2022-04-27mips: dts: ralink: mt7621: mux phy4 to gmac1 for GB-PC1Arınç ÜNAL1-8/+10
Mux the MT7530 switch's phy4 to the SoC's gmac1 on the GB-PC1 devicetree. This achieves 2 Gbps total bandwidth to the CPU using the second RGMII. Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com> Reviewed-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2022-04-27mips: dts: ralink: mt7621: add mdio label to mdio-busArınç ÜNAL2-11/+9
Add mdio label to the mdio-bus node to easily refer to it. Use the newly created label on the GB-PC2 devicetree. Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com> Reviewed-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2022-04-26MIPS: dts: align SPI NOR node name with dtschemaKrzysztof Kozlowski6-6/+6
The node names should be generic and SPI NOR dtschema expects "flash". Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Arınç ÜNAL <arinc.unal@arinc9.com> Acked-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2022-04-23mips: dts: ralink: mt7621: use the new compatible string for MT7621 pinctrlArınç ÜNAL1-1/+1
Use the new compatible string "ralink,mt7621-pinctrl" for the Ralink MT7621 pinctrl subdriver on mt7621.dtsi. Each subdriver needs to have a different compatible string. We don't want the same compatible string to match a different subdriver's pinmux data as it's not for our SoC. Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com> Acked-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Link: https://lore.kernel.org/r/20220414173916.5552-10-arinc.unal@arinc9.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-04-21MIPS: Ingenic: Refresh USB nodes to match driver changes.周琰杰 (Zhou Yanjie)3-3/+3
Refresh USB nodes in the jz4780.dtsi, x1000.dtsi, and x1830.dtsi files. Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com> Link: https://lore.kernel.org/r/1649964337-114337-4-git-send-email-zhouyanjie@wanyeetech.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-03-28Merge tag 'staging-5.18-rc1' of ↵Linus Torvalds4-0/+751
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging driver updates from Greg KH: "Here is the big set of staging driver updates for 5.18-rc1. Loads of tiny cleanups for almost all staging drivers in here, nothing major at all. Highlights include: - remove the ashmem Android driver. It is long-dead and if there are any legacy userspace applications still using it, the Android kernel images will maintain it, the community shouldn't care about it anymore - wfx wifi driver major cleanups. Should be ready to merge out of staging soon, and will coordinate with the wifi maintainers after -rc1 is out - major cleanups and unwinding of the layers of the r8188eu driver. It's amazing just how many unneeded layers of abstraction is in there, just when we think it's done, another is found... - lots of tiny coding style cleanups in many other staging drivers. All have been in linux-next for a while with no reported problems" * tag 'staging-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (455 commits) staging: r8188eu: remove unnecessary memset in r8188eu staging: greybus: introduce pwm_ops::apply staging: rts5208: Resolve checkpatch.pl issues. staging: sm750fb: fix naming style staging: fbtft: Consider type of init sequence values in fbtft_init_display() staging: fbtft: Constify buf parameter in fbtft_dbg_hex() staging: mmal-vchiq: clear redundant item named bulk_scratch mips: dts: ralink: add MT7621 SoC staging: r8188eu: remove some unused local ieee80211 macros staging: r8188eu: make rtl8188e_process_phy_info static staging: r8188eu: remove unused function prototype staging: r8188eu: remove three unused receive defines staging: r8188eu: remove unnecessary initializations staging: rtl8192e: Fix spelling mistake "RESQUEST" -> "REQUEST" MAINTAINERS: remove the obsolete file entry for staging in ANDROID DRIVERS staging: r8188eu: proper error handling in rtw_init_drv_sw staging: r8188eu: call _cancel_timer_ex from _rtw_free_recv_priv staging: vt6656: Removed unused variable vt3342_vnt_threshold staging: vt6656: Removed unused variable bb_vga_0 staging: remove ashmem ...
2022-03-25Merge tag 'mips_5.18' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux Pull MIPS updates from Thomas Bogendoerfer: - added support for QCN550x (ath79) - enabled KCSAN - removed TX39XX support - various cleanups and fixes * tag 'mips_5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (31 commits) MIPS: Fix build error for loongson64 and sgi-ip27 MIPS: ingenic: correct unit node address MIPS: Fix wrong comments in asm/prom.h MIPS: Remove redundant definitions of device_tree_init() MIPS: Remove redundant check in device_tree_init() MIPS: pgalloc: fix memory leak caused by pgd_free() MIPS: RB532: fix return value of __setup handler MIPS: Only use current_stack_pointer on GCC MIPS: boot/compressed: Use array reference for image bounds mips: cdmm: Fix refcount leak in mips_cdmm_phys_base mips: remove reference to "newer Loongson-3" mips: Always permit to build u-boot images MIPS: Sanitise Cavium switch cases in TLB handler synthesizers DEC: Limit PMAX memory probing to R3k systems mips: DEC: honor CONFIG_MIPS_FP_SUPPORT=n MIPS: fix fortify panic when copying asm exception handlers mips: ralink: fix a refcount leak in ill_acc_of_setup() mips: Implement "current_stack_pointer" MIPS: Remove TX39XX support MIPS: Modernize READ_IMPLIES_EXEC ...
2022-03-18MIPS: ingenic: correct unit node addressKrzysztof Kozlowski1-1/+1
Unit node addresses should not have leading 0x: Warning (unit_address_format): /nemc@13410000/efuse@d0/eth-mac-addr@0x22: unit name should not have leading "0x" Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Reviewed-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2022-03-16mips: dts: ralink: add MT7621 SoCArınç ÜNAL4-0/+751
The MT7621 system-on-a-chip includes an 880 MHz MIPS1004Kc dual-core CPU, a 5-port 10/100/1000 switch/PHY and one RGMII. Add the devicetrees for GB-PC1 and GB-PC2 devices which use MT7621 SoC. Acked-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com> Link: https://lore.kernel.org/r/20220315160149.3617-1-arinc.unal@arinc9.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-09MIPS: DTS: CI20: fix how ddc power is enabledH. Nikolaus Schaller1-13/+2
Originally we proposed a new hdmi-5v-supply regulator reference for CI20 device tree but that was superseded by a better idea to use the already defined "ddc-en-gpios" property of the "hdmi-connector". Since "MIPS: DTS: CI20: Add DT nodes for HDMI setup" has already been applied to v5.17-rc1, we add this on top. Fixes: ae1b8d2c2de9 ("MIPS: DTS: CI20: Add DT nodes for HDMI setup") Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Reviewed-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2022-01-11MIPS: bmips: Add support PCIe controller device nodesJim Quinlan4-0/+78
For Broadcom STB PCIe HW. The 7425 and 7435 are MIPs-based SOCs. Not much difference between the two for the DT properties except that they have slightly different PCIe interrupt assignments. Signed-off-by: Jim Quinlan <jim2101024@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2022-01-02MIPS: Loongson64: DTS: Add pm block node for Loongson-2K1000Qing Zhang1-0/+5
The module is now supported, enable it. Signed-off-by: Qing Zhang <zhangqing@loongson.cn> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-12-09MIPS: DTS: Ingenic: adjust register size to available registersH. Nikolaus Schaller3-3/+3
After getting the regmap size from the device tree we should reduce the ranges to the really available registers. This allows to read only existing registers from the debug fs and makes the regmap check out-of-bounds access. For the jz4780 we have done this already. Suggested-for: Paul Cercueil <paul@crapouillou.net> Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-12-09MIPS: DTS: CI20: Add DT nodes for HDMI setupPaul Boddie1-2/+70
We need to hook up * HDMI connector * HDMI power regulator * JZ4780_CLK_HDMI @ 27 MHz * DDC pinmux * HDMI and LCDC endpoint connections Signed-off-by: Paul Boddie <paul@boddie.org.uk> Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-12-09MIPS: DTS: jz4780: Account for Synopsys HDMI driver and LCD controllersPaul Boddie1-0/+40
A specialisation of the generic Synopsys HDMI driver is employed for JZ4780 HDMI support. This requires a new driver, plus device tree and configuration modifications. Here we add jz4780 device tree setup. Signed-off-by: Paul Boddie <paul@boddie.org.uk> Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-11-12dt-bindings: Rename Ingenic CGU headers to ingenic,*.hPaul Cercueil6-6/+6
Tidy up a bit the tree, by prefixing all include/dt-bindings/clock/ files related to Ingenic SoCs with 'ingenic,'. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20211016133322.40771-1-paul@crapouillou.net
2021-11-05Merge tag 'mips_5.16' of ↵Linus Torvalds7-580/+0
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux Pull MIPS updates from Thomas Bogendoerfer: - added printing of CPU options for /proc/cpuinfo - removed support for Netlogic SOCs - fixes and cleanup * tag 'mips_5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: MIPS: Cobalt: Explain GT64111 early PCI fixup mips: fix HUGETLB function without THP enabled mips: cm: Convert to bitfield API to fix out-of-bounds access MIPS: Remove NETLOGIC support MIPS: kernel: proc: add CPU option reporting MIPS: kernel: proc: use seq_puts instead of seq_printf MIPS: kernel: proc: fix trivial style errors MIPS: Fix assembly error from MIPSr2 code used within MIPS_ISA_ARCH_LEVEL MIPS: octeon: Remove unused functions MIPS: Loongson64: Add of_node_put() before break bcm47xx: Replace printk(KERN_ALERT ... pci_devname(dev)) with pci_alert() bcm47xx: Get rid of redundant 'else' MIPS: sni: Fix the build MIPS: Avoid macro redefinitions MIPS: loongson64: Fix no screen display during boot-up MIPS: loongson64: make CPU_LOONGSON64 depends on MIPS_FP_SUPPORT
2021-10-24MIPS: Remove NETLOGIC supportThomas Bogendoerfer7-580/+0
No (active) developer owns this hardware, so let's remove Linux support. Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-09-13MIPS: JZ4780: CI20: DTS: add SPI controller configArtur Rojek2-15/+38
1. Add nodes for the two SPI controllers found in MIPS Creator CI20. 2. Reparent SPI clock source to effectively use MPLL and set its clock rate to 54MHz. NOTE: To use the SPI controllers, `pinctrl-0` property must be set in order to configure the used pins. As SPI functionality is multiplexed on multiple pin groups, this choice is left to the user. An example configuration: ``` &spi0 { pinctrl-0 = <&pins_spi0>; } pins_spi0: spi0 { function = "ssi0"; groups = "ssi0-dt-e", "ssi0-dr-e", "ssi0-clk-e", "ssi0-ce0-e", "ssi0-ce1-e"; bias-disable; }; ``` Consult the CI20 pinout description for more details. Signed-off-by: Artur Rojek <contact@artur-rojek.eu> Link: https://lore.kernel.org/r/20210830230139.21476-4-contact@artur-rojek.eu Signed-off-by: Mark Brown <broonie@kernel.org>
2021-08-21MIPS: mscc: ocelot: mark the phy-mode for internal PHY portsVladimir Oltean2-0/+8
The ocelot driver was converted to phylink, and that expects a valid phy_interface_t. Without a phy-mode, of_get_phy_mode returns PHY_INTERFACE_MODE_NA, which is not ideal because phylink rejects that. The ocelot driver was patched to treat PHY_INTERFACE_MODE_NA as PHY_INTERFACE_MODE_INTERNAL to work with the broken DT blobs, but we should fix the device trees and specify the phy-mode too. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-08-21MIPS: mscc: ocelot: disable all switch ports by defaultVladimir Oltean3-0/+23
The ocelot switch driver used to ignore ports which do not have a phy-handle property and not probe those, but this is not quite ok since it is valid to not have a phy-handle property if there is a fixed-link. It seems that checking for a phy-handle was a proxy for the proper check which is for the status, but that doesn't make a lot of sense, since the ocelot driver already iterates using for_each_available_child_of_node which skips the disabled ports, so I have no idea. Anyway, a widespread pattern in device trees is for a SoC dtsi to disable by default all hardware, and let board dts files enable what is used. So let's do that and enable only the ports with a phy-handle in the pcb120 and pcb123 device tree files. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-08-12MIPS: Retire MACH_PISTACHIOJiaxun Yang2-4/+0
Now it can be replaced by generic kernel. Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-08-12MIPS: DTS: Pistachio add missing cpc and cdmmJiaxun Yang1-0/+10
CPC and CDMM addresses are adjustable and we should tell kernel how to place them in devicetree. Note that MACH_PISTACHIO code hardcoded CDMM base to 0x1bdd0000, however it will collide with GIC address range. As we don't have any CDMM device on this platform it won't be a problem. I found another spare range, 0x1bdf0000~0x1be00000 to place CDMM instead. Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-08-12MIPS: generic: Allow generating FIT image for Marduk boardJiaxun Yang2-0/+3
Marduk is based on IMG pistachio SoC. The platform is using MIPS UHI booting protocol and does have a proper devicetree implement, thus it could be a part of generic kernel. Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-07-02Merge tag 'mips_5.14' of ↵Linus Torvalds16-39/+182
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux Pull MIPS updates from Thomas Bogendoerfer: - add support for OpeneEmbed SOM9331 board - Ingenic fixes/improvments - other fixes and cleanups * tag 'mips_5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (39 commits) MIPS: Fix PKMAP with 32-bit MIPS huge page support MIPS: CI20: Add second percpu timer for SMP. MIPS: CI20: Reduce clocksource to 750 kHz. MIPS: Ingenic: Add MAC syscon nodes for Ingenic SoCs. dt-bindings: clock: Add documentation for MAC PHY control bindings. MIPS: X1830: Respect cell count of common properties. MIPS: set mips32r5 for virt extensions MIPS: loongsoon64: Reserve memory below starting pfn to prevent Oops MIPS: MT extensions are not available on MIPS32r1 mips/kvm: Use BUG_ON instead of if condition followed by BUG MIPS: OCTEON: octeon-usb: Use devm_platform_get_and_ioremap_resource() MIPS: add PMD table accounting into MIPS'pmd_alloc_one MIPS: Loongson64: fix spelling of SPDX tag MIPS: ingenic: rs90: Add dedicated VRAM memory region MIPS: ingenic: gcw0: Set codec to cap-less mode for FM radio MIPS: ingenic: jz4780: Fix I2C nodes to match DT doc MIPS: ingenic: Select CPU_SUPPORTS_CPUFREQ && MIPS_EXTERNAL_TIMER MIPS: Kconfig: ingenic: Ensure MACH_INGENIC_GENERIC selects all SoCs MIPS: cpu-probe: Fix FPU detection on Ingenic JZ4760(B) MIPS: boot: Support specifying UART port on Ingenic SoCs ...
2021-06-30MIPS: CI20: Add second percpu timer for SMP.周琰杰 (Zhou Yanjie)1-10/+14
1.Add a new TCU channel as the percpu timer of core1, this is to prepare for the subsequent SMP support. The newly added channel will not adversely affect the current single-core state. 2.Adjust the position of TCU node to make it consistent with the order in jz4780.dtsi file. Tested-by: Nikolaus Schaller <hns@goldelico.com> # on CI20 Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com> Acked-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-06-30MIPS: CI20: Reduce clocksource to 750 kHz.周琰杰 (Zhou Yanjie)1-2/+2
The original clock (3 MHz) is too fast for the clocksource, there will be a chance that the system may get stuck. Reported-by: Nikolaus Schaller <hns@goldelico.com> Tested-by: Nikolaus Schaller <hns@goldelico.com> # on CI20 Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com> Acked-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-06-30MIPS: Ingenic: Add MAC syscon nodes for Ingenic SoCs.周琰杰 (Zhou Yanjie)2-0/+14
Add MAC syscon nodes for X1000 SoC and X1830 SoC from Ingenic. Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com> Acked-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-06-30MIPS: X1830: Respect cell count of common properties.周琰杰 (Zhou Yanjie)1-5/+4
If N fields of X cells should be provided, then that's what the devicetree should represent, instead of having one single field of (N * X) cells. Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com> Acked-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-06-21MIPS: Loongson64: fix spelling of SPDX tagTom Rix1-1/+1
checkpatch looks for SPDX-License-Identifier. So change the '_' to '-' Signed-off-by: Tom Rix <trix@redhat.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-06-18MIPS: Loongson64: DTS: Add GMAC support for LS7A PCHQing Zhang1-2/+4
The GMAC module is now supported, enable it. Signed-off-by: Qing Zhang <zhangqing@loongson.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-18MIPS: Loongson64: Add GMAC support for Loongson-2K1000Qing Zhang1-0/+46
The GMAC module is now supported, enable it. Signed-off-by: Qing Zhang <zhangqing@loongson.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-01MIPS: ingenic: rs90: Add dedicated VRAM memory regionPaul Cercueil1-0/+14
Add a 1 MiB memory area dedicated to the video driver. This area will be managed by Linux' CMA, so that the ingenic-drm driver can be sure to always be able to allocate contiguous buffers. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-06-01MIPS: ingenic: gcw0: Set codec to cap-less mode for FM radioPaul Cercueil1-3/+2
When using the FM radio, we must not have capacitors on the headphones line, since it is used as the antenna. The "FM Radio" widget is removed so that the cap-less mode can be enabled dynamically through DAPM when the line input is used. This widget was useless anyway. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-06-01MIPS: ingenic: jz4780: Fix I2C nodes to match DT docPaul Cercueil1-5/+5
The "ingenic,jz4780-i2c" should have "ingenic,jz4770-i2c" as a fallback compatible, as per the Device Tree documentation found in Documentation/devicetree/bindings/i2c/ingenic,i2c.yaml. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-05-27mips: dts: loongson: fix DTC unit name warningszhaoxiao1-1/+1
Fixes the following W=1 kernel build warning(s): arch/mips/boot/dts/loongson/rs780e-pch.dtsi:24.7-41.5: Warning (unit_address_vs_reg): /bus@10000000/isa: node has a reg or ranges property, but no unit name arch/mips/boot/dts/loongson/rs780e-pch.dtsi:24.7-41.5: Warning (simple_bus_reg): /bus@10000000/isa: simple-bus unit address format error, expected "18000000" Signed-off-by: zhaoxiao <zhaoxiao@uniontech.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-05-27mips: dts: loongson: fix DTC unit name warningszhaoxiao1-1/+1
Fixes the following W=1 kernel build warning(s): arch/mips/boot/dts/loongson/ls7a-pch.dtsi:410.7-415.5: Warning (unit_address_vs_reg): /bus@10000000/isa: node has a reg or ranges property, but no unit name arch/mips/boot/dts/loongson/ls7a-pch.dtsi:410.7-415.5: Warning (simple_bus_reg): /bus@10000000/isa: simple-bus unit address format error, expected "18000000" Signed-off-by: zhaoxiao <zhaoxiao@uniontech.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-05-27mips: dts: loongson: fix DTC unit name warningszhaoxiao1-1/+1
Fixes the following W=1 kernel build warning(s): arch/mips/boot/dts/loongson/loongson64v_4core_virtio.dts:91.7-96.5: Warning (unit_address_vs_reg): /bus@10000000/isa: node has a reg or ranges property, but no unit name arch/mips/boot/dts/loongson/loongson64v_4core_virtio.dts:91.7-96.5: Warning (simple_bus_reg): /bus@10000000/isa: simple-bus unit address format error, expected "18000000" Signed-off-by: zhaoxiao <zhaoxiao@uniontech.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-05-27mips: dts: loongson: fix DTC unit name warningszhaoxiao1-2/+2
Fixes the following W=1 kernel build warning(s): arch/mips/boot/dts/loongson/loongson64g-package.dtsi:42.30-49.5: Warning (simple_bus_reg): /bus@1fe00000/serial@1fe001e0: simple-bus unit address format error, expected "1fe00100" arch/mips/boot/dts/loongson/loongson64g-package.dtsi:51.30-59.5: Warning (simple_bus_reg): /bus@1fe00000/serial@1fe001e8: simple-bus unit address format error, expected "1fe00110" Signed-off-by: zhaoxiao <zhaoxiao@uniontech.com> Acked-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-05-27mips: dts: loongson: fix DTC unit name warningszhaoxiao1-1/+1
Fixes the following W=1 kernel build warning(s): arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi:26.9-32.4: Warning (unit_address_vs_reg): /memory: node has a reg or ranges property, but no unit name Signed-off-by: zhaoxiao <zhaoxiao@uniontech.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-05-27MIPS: ath79: ar9331: add pause property for the MAC <> switch linkOleksij Rempel1-0/+2
Both, MAC and switch support flow control, so add pause property for the MAC <> switch link. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-05-27MIPS: ath79: ar9331: Add OpeneEmbed SOM9331 BoardOleksij Rempel2-0/+111
Add SOM9331 based Board. It has 3 LAN ports, usb to uart controller and USB type A port. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-05-27MIPS: SEAD3: Correct Ethernet node nameGeert Uytterhoeven1-1/+1
make dtbs_check: eth@1f010000: $nodename:0: 'eth@1f010000' does not match '^ethernet(@.*)?$' Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-05-11MIPS:DTS:Correct device id of pcie for Loongnon-2KXiaochuan Mao1-8/+8
from Loongson-2K user manual know that Loongson-2K have two pcie controller pcie0 and pcie1, pcie0 have four port named port0~port3 and pcie1 have 2 port named port0~port1. the device id of port0 is 7a19 in each pcie controller and others are 7a09. Signed-off-by: Xiaochuan Mao <maoxiaochuan@loongson.cn> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-04-23MIPS:DTS:Correct the license for Loongson-2Kxiaochuan mao1-1/+1
make license from GPL3.0 to GPL2.0 Signed-off-by: xiaochuan mao <maoxiaochuan@loongson.cn> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-04-23MIPS:DTS:Fix label name and interrupt number of ohci for Loongson-2Kxiaochuan mao1-2/+2
from Loongson-2K1000 user manual know that under pci bus the device num is 4, function number is 2 and register is 0x2200 is ohci. the ohci interrupt number is 51. because Loongson-2K1000 has 64 interrupt sources, 0-31 correspond to the device tree liointc0 device node, and the other correspond to liointc1 node. so it should be number 19 correspon to liointc1. Signed-off-by: xiaochuan mao <maoxiaochuan@loongson.cn> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-04-06mips: bmips: bcm63268: populate device tree nodesÁlvaro Fernández Rojas1-14/+116
- Rename periph_clk to periph_osc. - Rename clkctl to periph_clk. - Move syscon-reboot to subnode. - Add hsspi-osc clock. - Add watchdog. - Add HS SPI controller - Add NAND controller. - Add USBH PHY. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-04-06mips: bmips: bcm6368: populate device tree nodesÁlvaro Fernández Rojas1-11/+116
- Rename periph_clk to periph_osc. - Rename clkctl to periph_clk. - Move syscon-reboot to subnode. - Add watchdog controller. - Add SPI controller. - Add NAND controller. - Add USBH PHY controller. - Add RNG controller. - Add cfi-flash controller. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
generated by cgit v1.2.3 (git 2.39.0) at 2025-03-15 10:50:44 +0300