summaryrefslogtreecommitdiff
path: root/arch/mips/bcm47xx/sprom.c
AgeCommit message (Collapse)AuthorFilesLines
2016-05-13MIPS: BCM47xx: Move SPROM driver to drivers/firmware/Rafał Miłecki1-724/+0
Broadcom ARM home routers store SPROM content in NVRAM just like MIPS ones. To share SPROM code we need to move it out of arch/mips/ to some common place. We already have bcm47xx_nvram in firmware path and SPROM should fit there as well. This driver is responsible for parsing SoC configuration data into a struct shared between ssb and bcma buses. This was tested with BCM4706 & BCM5357C0 (BCM47XX) and BCM4708A0 (ARCH_BCM_5301X). Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Cc: Hauke Mehrtens <hauke@hauke-m.de> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/12210/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-04-03FIRMWARE: Broadcom: Fix grammar of warning messages in bcm47xx_sprom.c.Ralf Baechle1-2/+2
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-01-20MIPS: BCM47xx: Support SPROM prefixes on other platformsRafał Miłecki1-3/+9
BCM47XX platform has specific PCI setup because all buses share the same domain. It's different e.g. on ARM ARCH_BCM_5301X where each PCI bus gets its own domain (they are handled by iProc PCIe controller driver). As we want to make SPROM driver more generic, let's add an exception for BCM47xx. It was tested on BCM4706 (MIPS) and BCM4708A0 (ARM). Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Cc: Hauke Mehrtens <hauke@hauke-m.de> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/11969/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-11-11MIPS: BCM47xx: Fetch board info directly in callback functionRafał Miłecki1-13/+0
This drops another symbol dependency between setup.c and sprom.c which will allow us to make SPROM code a separated module (and share it with ARM). Patch tested on Linksys WRT300N V1. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Cc: Hauke Mehrtens <hauke@hauke-m.de> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/11360/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-11-11MIPS: BCM47xx: Fix some WARNINGs pointed in sprom.c by checkpatch.plRafał Miłecki1-9/+16
There are still few left: 1) Most of them about lines over 80 chars (increased readability exception) 2) Wrong parsing of preprocessor macros Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Cc: linux-mips@linux-mips.org Cc: Hauke Mehrtens <hauke@hauke-m.de> Patchwork: https://patchwork.linux-mips.org/patch/11356/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-11-11MIPS: BCM47xx: Support on-SoC bus in SPROM reading functionRafał Miłecki1-2/+6
To support (extract) SPROM on Broadcom ARM devices we should separate SPROM code and make it a separated module. We won't want to export bcm47xx_fill_sprom symbol so we should support SoC SPROM in the standard fallback function and then modify ssb to use it. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Acked-by: Hauke Mehrtens <hauke@hauke-m.de> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/11355/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-06-21MIPS: BCM47xx: Simplify handling SPROM revisionsRafał Miłecki1-44/+9
After the big SPROM cleanup moving code to the bcm47xx_sprom_fill_auto we ended up with few tiny functions, two of them being identical. Let's get rid of these [12]-liners. This also stops extracting higher SPROM revisions as revision 1. Now we have that function nicely handling revisions we don't need it. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Cc: linux-mips@linux-mips.org Cc: Hauke Mehrtens <hauke@hauke-m.de> Patchwork: https://patchwork.linux-mips.org/patch/10569/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-06-21MIPS: BCM47xx: Read board info for all bcma busesRafał Miłecki1-22/+22
Extra bcma buses may be totally different models, see following dump: boardtype=0x0646 pci/1/1/boardtype=0x0545 pci/2/1/boardtype=0x62b We need to detect them properly to allow drivers apply some board specific hacks. [ralf@linux-mips.org: folded in Rafal's fix.] Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Cc: linux-mips@linux-mips.org Cc: Hauke Mehrtens <hauke@hauke-m.de> Patchwork: https://patchwork.linux-mips.org/patch/10028/ Patchwork: https://patchwork.linux-mips.org/patch/10048/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-06-21MIPS: BCM47xx: Extract info about et2 interfaceRafał Miłecki1-0/+6
New devices may have more than 1 Ethernet core (device). We should extract info about them to make it available to Ethernet drivers. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Cc: linux-mips@linux-mips.org Cc: Hauke Mehrtens <hauke@hauke-m.de> Cc: Hante Meuleman <meuleman@broadcom.com> Cc: Ian Kent <raven@themaw.net> Patchwork: https://patchwork.linux-mips.org/patch/10027/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-06-21MIPS: BCM47xx: Extract all boardflags to new u32 fieldsRafał Miłecki1-0/+3
For years we planned to get rid of old u16 fields, let's start doing it with MIPS code. This process will take some time, it requires doing the same in ssb/bcma and then switching all drivers to new fields. This will be handled in separated patches submitted to appropriate trees. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Cc: linux-mips@linux-mips.org Cc: Hauke Mehrtens <hauke@hauke-m.de> Patchwork: https://patchwork.linux-mips.org/patch/10026/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-04-02MIPS: BCM47xx: Move filling most of SPROM to the generic functionRafał Miłecki1-401/+204
This simplifies code a lot by dropping many per-revision-group functions. There are still some paths left that use uncommon NVRAM read helpers or fill arrays. They will need to be handled in separated patch. I've tested this (by printing SPROM content) for regressions on: 1) BCM4704 (SPROM revision 2) 2) BCM4706 (SPROM revision 8 plus 11 & 9 on extra WiFi cards) The only difference is not reading board_type from SPROM rev 11 which is unsupported and treated as rev 1. This change for rev 1 is expected. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Cc: linux-mips@linux-mips.org Cc: Hauke Mehrtens <hauke@hauke-m.de> Cc: Jonas Gorski <jonas.gorski@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/9660/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-04-02MIPS: BCM47xx: Add generic function filling SPROM entriesRafał Miłecki1-3/+29
Handling many SPROM revisions became messy, we have tons of functions specific to various revision groups which are quite hard to track. For years there is yet another revision 11 asking for support, but adding it in current the form would make things even worse. To resolve this problem let's add new function with table-like entries that will contain revision bitmask for every SPROM variable. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Cc: linux-mips@linux-mips.org Cc: Hauke Mehrtens <hauke@hauke-m.de> Cc: Jonas Gorski <jonas.gorski@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/9659/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-04-01MIPS: BCM47XX: Fix coding style to match kernel standardsRafał Miłecki1-4/+4
[ralf@linux-mips.org: Fixed conflicts.] Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Acked-by: Hauke Mehrtens <hauke@hauke-m.de> Cc: linux-mips@linux-mips.org Cc: Paul Walmsley <paul@pwsan.com> Patchwork: https://patchwork.linux-mips.org/patch/8665/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-04-01MIPS: BCM47xx: Move NVRAM header to the include/linux/.Rafał Miłecki1-1/+0
There are two reasons for having this header in the common place: 1) Simplifying drivers that read NVRAM entries. We will be able to safely call bcm47xx_nvram_* functions without #ifdef-s. 2) Getting NVRAM driver out of MIPS arch code. This is needed to support BCM5301X arch which also requires this NVRAM driver. Patch for that will follow once we get is reviewed. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Acked-by: Hauke Mehrtens <hauke@hauke-m.de> Cc: linux-mips@linux-mips.org Cc: Arnd Bergmann <arnd@arndb.de> Cc: Paul Walmsley <paul@pwsan.com> Cc: linux-soc@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/8619/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-03-24MIPS: BCM47XX: Support SPROM prefixes for PCI devicesRafał Miłecki1-0/+33
Support parsing SPROMs with prefixes defined like devpath1=pci/1/1 Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Cc: linux-mips@linux-mips.org Cc: Hauke Mehrtens <hauke@hauke-m.de> Patchwork: https://patchwork.linux-mips.org/patch/9552/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-24MIPS: BCM47XX: Clean up nvram headerRafał Miłecki1-0/+14
1) Move private defines to the .c file 2) Move SPROM helper to the sprom.c 3) Drop unused code 4) Rename magic to the NVRAM_MAGIC 5) Add const to the char pointer we never modify Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Acked-by: Hauke Mehrtens <hauke@hauke-m.de> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/8289/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-24MIPS: BCM47XX: Move SPROM fallback code into sprom.cRafał Miłecki1-0/+68
This is some general cleanup as well as preparing sprom.c to become a standalone driver. We will need this for bcm53xx ARM arch support. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Acked-by: Hauke Mehrtens <hauke@hauke-m.de> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/8232/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-07-30MIPS: BCM47XX: fixup broken MAC addresses in nvramHauke Mehrtens1-0/+48
The address prefix 00:90:4C is used by Broadcom in their initial configuration. When a mac address with the prefix 00:90:4C is used all devices from the same series are sharing the same mac address. To prevent mac address collisions we replace them with a mac address based on the base address. To generate such addresses we take the main mac address from et0macaddr and increase it by two for the first wifi device and by 3 for the second one. This matches the printed mac address on the device. The main mac address increased by one is used as wan address by the vendor code. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Cc: zajec5@gmail.com Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/7489/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-05-20ssb: sprom: add dev_id field for value overriding standard IDRafał Miłecki1-0/+1
Some devices may have different features despite sharing the same ID (e.g. PCI ID). For example 14e4:4331 is usually a dual band, but this can be "limited". Device with "pci/x/y/devid=0x4332" supports 2.4 GHz only. Similarly 0x4333 will mean support for 5 GHz only. Add entry in SPROM so info described above can be extracted and stored. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Acked-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-01-22MIPS: BCM47XX: Fix some very confused types and data corruptionIlia Mirkin1-9/+9
Fix nvram_read_alpha2 copying too many bytes over the ssb_sprom structure. Also fix the arguments of the read_macaddr, although the code was technically not wrong before due to an extra dereference. Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu> Acked-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6211/
2013-02-21Merge branch 'mips-next-3.9' of ↵Ralf Baechle1-12/+10
git://git.linux-mips.org/pub/scm/john/linux-john into mips-for-linux-next
2013-02-15MIPS: BCM47XX: use fallback sprom var for board_{rev,type}Hauke Mehrtens1-4/+2
An SoC normally do not define path variables for board_rev and board_type and the Broadcom SDK also uses the nvram values without a prefix in such cases. Do the same to fill these sprom attributes from nvram and do not leave them empty, because brcmsmac do not like this. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Patchwork: http://patchwork.linux-mips.org/patch/4679/ Signed-off-by: John Crispin <blogic@openwrt.org>
2013-02-15MIPS: BCM47XX: trim the nvram values for parsingHauke Mehrtens1-3/+3
Some nvram values on some devices have a newline character at the end of the value, that caused read errors. Trim the string before reading the number. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Patchwork: http://patchwork.linux-mips.org/patch/4745/ Signed-off-by: John Crispin <blogic@openwrt.org>
2013-02-15MIPS: BCM47XX: add bcm47xx prefix in front of nvram function namesHauke Mehrtens1-4/+4
The nvram functions are exported and used by some normal drivers. To prevent name clashes with ofter parts of the kernel code add a bcm47xx_ prefix in front of the function names and the header file name. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Patchwork: http://patchwork.linux-mips.org/patch/4744/ Signed-off-by: John Crispin <blogic@openwrt.org>
2013-02-15MIPS: BCM47XX: use common error codes in nvram readsHauke Mehrtens1-1/+1
Instead of using our own error codes use some common codes. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Patchwork: http://patchwork.linux-mips.org/patch/4739/ Signed-off-by: John Crispin <blogic@openwrt.org>
2013-02-01MIPS: Whitespace cleanup.Ralf Baechle1-2/+2
Having received another series of whitespace patches I decided to do this once and for all rather than dealing with this kind of patches trickling in forever. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-11-09MIPS: BCM47xx: sprom: read values without prefix as fallbackHauke Mehrtens1-324/+442
There are bcma based devices like the Linksys E2000 out there, which do have one ieee80211 core, but no PCIe core and they are using no prefixes for the sprom. In addition some values like boardtype are stored without a prefix for the main SoC chip also when they have an additional PCIe wifi chip with an own boardtype var on some devices. The Ethernet addresses are now also read out correctly without a prefix so calling bcm47xx_fill_sprom_ethernet is not needed any more. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Patchwork: http://patchwork.linux-mips.org/patch/4364 Signed-off-by: John Crispin <blogic@openwrt.org>
2012-11-09MIPS: BCM47xx: read out full board dataHauke Mehrtens1-20/+14
Read out the full board data independently of the sprom version. Now we also get the full boardflags and so on if sromrev is not set and our code would assume a rev 1 device. When a nvram option is not set because it is not there this is no problem. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Patchwork: http://patchwork.linux-mips.org/patch/4363 Signed-off-by: John Crispin <blogic@openwrt.org>
2012-05-16bcma: Move initialization of SPROM to prevent overwriteNathan Hintz1-2/+0
The first thing bcm47xx_fill_sprom does is initialize (zero fill) the SPROM. For BCMA SOC, this wipes out any values previously read by bcm47xx_fill_sprom_ethernet (see arch/mips/bcm47xx/setup.c - bcm47xx_get_sprom_bcma). Move the initialization of SPROM so it is called prior to filling in any values. Signed-off-by: Nathan Hintz <nlhintz@hotmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-16MIPS: bcm47xx: read baordrev without prefix from spromHauke Mehrtens1-0/+2
When the boardrev with a prefix is not available, try to read it without a prefix. This is based on code from the Broadcom SDK. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Acked-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-16bcma: add boardinfo structHauke Mehrtens1-0/+12
This struct contains information about the board, the chip is running on. The struct is filled for PCIe devices and SoCs. This information is used by b43 and will be used by brcmsmac soon. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Tested-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-16MIPS: bcm47xx: refactor fetching board dataHauke Mehrtens1-0/+12
Now the fetching of board data also uses nvram_read_u16 and not simple_strtoul any more. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Acked-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-06MIPS: BCM47XX: move and extend sprom parsingHauke Mehrtens1-0/+620
Move the sprom parsing from nvram into sprom.c. There are all values needed for sprom version 1 to 9 read from nvram and there are more sanity checks added. This is based on the sprom parsing in the open source part of the Broadcom SDK. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-10-27 23:19:02 +0300