summaryrefslogtreecommitdiff
path: root/arch/m68knommu
AgeCommit message (Collapse)AuthorFilesLines
2011-02-16m68knommu: set flow handler for secondary interrupt controller of 5249Greg Ungerer1-1/+3
The secondary interrupt controller of the ColdFire 5249 code is not setting the edge triggered flow handler. Set it. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-02-16m68knommu: remove use of IRQ_FLG_LOCK from 68360 platform supportGreg Ungerer2-2/+2
The m68knommu arch does not define or use IRQ_FLG_LOCK in its irq subsystem. Remove obsolete use of it. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-02-16m68knommu: add missing linker __modver sectionGreg Ungerer1-0/+6
Add missing linker section __modver to fix: LD vmlinux /usr/local/bin/../m68k-uclinux/bin/ld.real: error: no memory region specified for loadable section `__modver' Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-02-16m68knommu: fix mis-named variable int set_irq_chip loopGreg Ungerer1-2/+2
Compiling for 68360 targets gives: CC arch/m68knommu/platform/68360/ints.o arch/m68knommu/platform/68360/ints.c: In function ‘init_IRQ’: arch/m68knommu/platform/68360/ints.c:135:16: error: ‘irq’ undeclared (first use in this function) arch/m68knommu/platform/68360/ints.c:135:16: note: each undeclared identifier is reported only once for each function it appears in Fix variable name used. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-02-16m68knommu: add optimize memmove() functionGreg Ungerer2-1/+106
Add an m68k/coldfire optimized memmove() function for the m68knommu arch. This is the same function as used by m68k. Simple speed tests show this is faster once buffers are larger than 4 bytes, and significantly faster on much larger buffers (4 times faster above about 100 bytes). This also goes part of the way to fixing a regression caused by commit ea61bc461d09e8d331a307916530aaae808c72a2 ("m68k/m68knommu: merge MMU and non-MMU string.h"), which breaks non-coldfire non-mmu builds (which is the 68x328 and 68360 families). They currently have no memmove() fucntion defined, since there was none in the m68knommu/lib functions. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-02-08m68knommu: fix use of un-defined _TIF_WORK_MASKGreg Ungerer3-3/+0
The _TIF_WORK_MASK definition was removed in the clean up of MMU and non-MMU arch/m68k/include/asm/thread_info*.h files (this was commit cddafa3500fde4a07e5bf899ec97a04069f8f7ce, "merge MMU and non-MMU thread_info.h"). It didn't get cleaned out of the entry.S code for the 68328 and 68360 based platforms. And it was replaced by a hard coded constant mask for coldfire platforms. There is currently no need to mask any of these bits, so fix all uses (and former uses) to check for any non-zero value. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-01-21m68knommu: Use generic irq KconfigThomas Gleixner1-4/+1
No functional change. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Greg Ungerer <gerg@uclinux.org>
2011-01-21genirq: Remove __do_IRQThomas Gleixner1-4/+0
All architectures are finally converted. Remove the cruft. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Richard Henderson <rth@twiddle.net> Cc: Mike Frysinger <vapier@gentoo.org> Cc: David Howells <dhowells@redhat.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Greg Ungerer <gerg@uclinux.org> Cc: Michal Simek <monstr@monstr.eu> Acked-by: David Howells <dhowells@redhat.com> Cc: Kyle McMartin <kyle@mcmartin.ca> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Chen Liqin <liqin.chen@sunplusct.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Jeff Dike <jdike@addtoit.com>
2011-01-21kconfig: rename CONFIG_EMBEDDED to CONFIG_EXPERTDavid Rientjes7-7/+7
The meaning of CONFIG_EMBEDDED has long since been obsoleted; the option is used to configure any non-standard kernel with a much larger scope than only small devices. This patch renames the option to CONFIG_EXPERT in init/Kconfig and fixes references to the option throughout the kernel. A new CONFIG_EMBEDDED option is added that automatically selects CONFIG_EXPERT when enabled and can be used in the future to isolate options that should only be considered for embedded systems (RISC architectures, SLOB, etc). Calling the option "EXPERT" more accurately represents its intention: only expert users who understand the impact of the configuration changes they are making should enable it. Reviewed-by: Ingo Molnar <mingo@elte.hu> Acked-by: David Woodhouse <david.woodhouse@intel.com> Signed-off-by: David Rientjes <rientjes@google.com> Cc: Greg KH <gregkh@suse.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jens Axboe <axboe@kernel.dk> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Robin Holt <holt@sgi.com> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-18Merge branch 'for-linus' of ↵Linus Torvalds14-243/+212
git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu: (25 commits) m68knommu: fix broken setting of irq_chip and handler m68knommu: switch to using -mcpu= flags for ColdFire targets m68knommu: arch/m68knommu/Kconfig whitespace cleanup m68knommu: create optimal separate instruction and data cache for ColdFire m68knommu: support ColdFire caches that do copyback and write-through m68knommu: support version 2 ColdFire split cache m68knommu: make cache push code ColdFire generic m68knommu: clean up ColdFire cache control code m68knommu: move inclusion of ColdFire v4 cache registers m68knommu: merge bit definitions for version 3 ColdFire cache controller m68knommu: create bit definitions for the version 2 ColdFire cache controller m68knommu: remove empty __iounmap() it is no used m68knommu: remove kernel_map() code, it is not used m68knommu: remove do_page_fault(), it is not used m68knommu: use user stack pointer hardware on some ColdFire cores m68knommu: remove command line printing DEBUG m68knommu: remove fasthandler interrupt code m68knommu: move UART addressing to part specific includes m68knommu: fix clock rate value reported for ColdFire 54xx parts m68knommu: move ColdFire CPU names into their headers ...
2011-01-07m68knommu: Need to check __get_user()/__put_user() resultAl Viro1-6/+6
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Acked-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-01-07m68knommu: signal.c __user annotationsAl Viro1-28/+28
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Acked-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-01-07m68knommu: Equivalent of "m68k: handle new gcc's"Al Viro1-14/+14
... from back in 2004; again, it's ifdefed out by CONFIG_FPU. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Acked-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-01-07m68knommu: f_pcr has been gone since headers' mergeAl Viro1-4/+4
sure, it's effectively ifdefed out, but still... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Acked-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-01-07m68knommu: Don't lose state if sigframe setup failsAl Viro1-7/+12
exact parallel to m68k analog Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Acked-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-01-07m68knommu: Handle multiple pending signalsAl Viro4-9/+8
we shouldn't bugger off to userland when there still are pending signals; among other things it makes e.g. SIGSEGV triggered by failure to build a sigframe to be delivered _now_ and not when we hit the next syscall or interrupt. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Acked-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-01-07m68knommu: Switch to saner sigsuspendAl Viro5-66/+22
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Acked-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-01-07m68knommu: Don't bother with SA_ONESHOTAl Viro1-3/+0
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Acked-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-01-07m68knommu: fix broken setting of irq_chip and handlerGreg Ungerer1-2/+2
Fix compile error, by using correct loop variable: arch/m68knommu/platform/68328/ints.c: In function ‘init_IRQ’: arch/m68knommu/platform/68328/ints.c:182: error: ‘irq’ undeclared (first use in this function) arch/m68knommu/platform/68328/ints.c:182: error: (Each undeclared identifier is reported only once arch/m68knommu/platform/68328/ints.c:182: error: for each function it appears in.) Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-01-05m68knommu: switch to using -mcpu= flags for ColdFire targetsGreg Ungerer1-5/+5
Gcc has deprecated the use of the following ColdFire cpu options: -m5206e, -m528x, -m5307 and -m5407. In there place we should use the equivilent -mcpu= option and setting. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-01-05m68knommu: arch/m68knommu/Kconfig whitespace cleanupPhilippe De Muyter1-10/+10
Replace 8 spaces, or even 7, by TAB at begin of lines. Signed-off-by: Philippe De Muyter <phdm@macqel.be> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-01-05m68knommu: support ColdFire caches that do copyback and write-throughGreg Ungerer1-0/+24
The version 3 and version 4 ColdFire cache controllers support both write-through and copy-back modes on the data cache. Allow for Kconfig time configuration of this, and set the cache mode appropriately. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-01-05m68knommu: support version 2 ColdFire split cacheGreg Ungerer1-0/+32
The newer version 2 ColdFire CPU cores support a configurable cache arrangement. The cache memory can be used as all instruction cache, all data cache, or split in half for both instruction and data caching. Support this setup via a Kconfig time menu that allows a kernel builder to choose the arrangement they want to use. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-01-05m68knommu: make cache push code ColdFire genericGreg Ungerer2-1/+49
Currently the code to push cache lines is only available to version 4 cores. Version 3 cores may also need to use this if we support copy- back caches on them. Move this code to make it more generic, and useful for all version ColdFire cores. With this in place we can now have a single cache_flush_all() code path that does all the right things on all version cores. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-01-05m68knommu: clean up ColdFire cache control codeGreg Ungerer1-5/+21
The cache control code for the ColdFire CPU's is a big ugly mess of "#ifdef"ery liberally coated with bit constants. Clean it up. The cache controllers in the various ColdFire parts are actually quite similar. Just differing in some bit flags and options supported. Using the header defines now in place it is pretty easy to factor out the small differences and use common setup and flush/invalidate code. I have preserved the cache setups as they where in the old code (except where obviously wrong - like in the case of the 5249). Following from this it should be easy now to extend the possible setups used on the CACHE controllers that support split cacheing or copy-back or write through options. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-01-05m68knommu: remove empty __iounmap() it is no usedGreg Ungerer1-9/+0
The empty __iounmap() function is not used on m68knommu at all. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-01-05m68knommu: remove kernel_map() code, it is not usedGreg Ungerer2-34/+1
The kernel_map() functions is not used anywhere, remove it. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-01-05m68knommu: remove do_page_fault(), it is not usedGreg Ungerer2-58/+1
The non-MMU m68k does not use the do_page_fault() code, so remove it. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-01-05m68knommu: use user stack pointer hardware on some ColdFire coresGreg Ungerer2-20/+20
The more modern ColdFire parts (even if based on older version cores) have separate user and supervisor stack pointers (a7 register). Modify the ColdFire CPU setup and exception code to enable and use this on parts that have it. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-01-05m68knommu: remove command line printing DEBUGGreg Ungerer1-5/+0
There is no need for the DEBUG based command line printing in here. The kernel will print out the command line in the banner later in the boot up. So remove it. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-01-05m68knommu: remove fasthandler interrupt codeGreg Ungerer1-27/+1
There are no users of the old "fasthandler" interrupt entry code. So remove it. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-01-05m68knommu: fix clock rate value reported for ColdFire 54xx partsGreg Ungerer1-9/+11
The instruction timings of the ColdFire 54xx family parts are different to other version 4 parts (or version 2 or 3 parts for that matter too). Move the instruction timing setting into the ColdFire part specific headers, and set the 54xx value appropriately. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-01-05m68knommu: move ColdFire CPU names into their headersGreg Ungerer1-44/+11
Move the ColdFire CPU names out of setup.c and into their repsective headers. That way when we add new ones we won't need to modify setup.c any more. Add the missing 548x CPU name. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-01-05m68knommu: add support for the ColdFire 547x family of processorsGreg Ungerer1-1/+6
The Freescale M547x family of ColdFire processors is very similar to the M548x series. We use all the same support for it. Initially all we need is a high level configuration option for it. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-01-05m68knommu: make Coldfire 548x support more genericGreg Ungerer5-21/+26
The ColdFire 547x family of processors is very similar to the ColdFire 548x series. Almost all of the support for them is the same. Make the code supporting the 548x more gneric, so it will be capable of supporting both families. For the most part this is a renaming excerise to make the support code more obviously apply to both families. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2010-11-17BKL: remove extraneous #include <smp_lock.h>Arnd Bergmann1-1/+0
The big kernel lock has been removed from all these files at some point, leaving only the #include. Remove this too as a cleanup. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-29Merge branch 'kconfig' of ↵Linus Torvalds1-7/+0
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6 * 'kconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6: (38 commits) kbuild: convert `arch/tile' to the kconfig mainmenu upgrade README: cite nconfig Revert "kconfig: Temporarily disable dependency warnings" kconfig: Use PATH_MAX instead of 128 for path buffer sizes. kconfig: Fix realloc usage() kconfig: Propagate const kconfig: Don't go out from read config loop when you read new symbol kconfig: fix menuconfig on debian lenny kbuild: migrate all arch to the kconfig mainmenu upgrade kconfig: expand file names kconfig: use the file's name of sourced file kconfig: constify file name kconfig: don't emit warning upon rootmenu's prompt redefinition kconfig: replace KERNELVERSION usage by the mainmenu's prompt kconfig: delay gconf window initialization kconfig: expand by default the rootmenu's prompt kconfig: add a symbol string expansion helper kconfig: regen parser kconfig: implement the `mainmenu' directive kconfig: allow PACKAGE to be defined on the compiler's command-line ... Fix up trivial conflict in arch/mn10300/Kconfig
2010-10-28ptrace: cleanup arch_ptrace() on m68knommuNamhyung Kim1-29/+25
Use new 'regno', 'datap' variables in order to remove duplicated expressions and unnecessary castings. Alse remove checking @addr less than 0 because addr is now unsigned. Signed-off-by: Namhyung Kim <namhyung@gmail.com> Acked-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-28ptrace: change signature of arch_ptrace()Namhyung Kim1-3/+4
Fix up the arguments to arch_ptrace() to take account of the fact that @addr and @data are now unsigned long rather than long as of a preceding patch in this series. Signed-off-by: Namhyung Kim <namhyung@gmail.com> Cc: <linux-arch@vger.kernel.org> Acked-by: Roland McGrath <roland@redhat.com> Acked-by: David Howells <dhowells@redhat.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-25Merge branch 'for-linus' of ↵Linus Torvalds36-193/+499
git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu: (21 commits) m68knommu: convert to using tracehook_report_syscall_* m68knommu: some boards use fixed phy for FEC ethernet m68knommu: support the external GPIO based interrupts of the 5272 m68knommu: mask of vector bits in exception word properly m68knommu: change to new flag variables m68knommu: Fix MCFUART_TXFIFOSIZE for m548x. m68knommu: add basic mmu-less m548x support m68knommu: .gitignore vmlinux.lds m68knommu: stop using __do_IRQ m68knommu: rename PT_OFF_VECTOR to PT_OFF_FORMATVEC. m68knommu: add support for Coldfire 547x/548x interrupt controller m68k{nommu}: Remove unused DEFINE's from asm-offsets.c m68knommu: whitespace cleanup in 68328/entry.S m68knommu: Document supported chips in intc-2.c and intc-simr.c. m68knommu: fix strace support for 68328/68360 m68knommu: fix default starting date arch/m68knommu: Removing dead 68328_SERIAL_UART2 config option arch/m68knommu: Removing dead RAM_{16,32}_MB config option arch/m68knommu: Removing dead M68KFPU_EMU config option arch/m68knommu: Removing dead RELOCATE config option ...
2010-10-23Merge branch 'for-linus' of ↵Linus Torvalds2-4/+3
git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: m68k: Add missing I/O macros {in,out}{w,l}_p() for !CONFIG_ISA m68k: Remove big kernel lock in cache flush code m68k: __pa(): cast arg to long fbdev: atafb - Remove undead ifdef ATAFB_FALCON zorro: Fix device_register() error handling fbdev/m68k: Fix section mismatches in q40fb.c m68k/m68knommu: merge the MMU and non-MMU traps.h m68k/m68knommu: merge MMU and non-MMU thread_info.h m68k/m68knommu: merge MMU and non-MMU atomic.h m68k/m68knommu: clean up page.h m68k/m68knommu: merge machdep.h files into a single file m68k/m68knommu: merge MMU and non-MMU string.h m68k/m68knommu: Remove dead SMP config option m68k: move definition of THREAD_SIZE into thread_info_mm.h m68k: Use asm-generic/ioctls.h (enables termiox) m68k: Remove dead GG2 config option
2010-10-22m68k/m68knommu: merge MMU and non-MMU thread_info.hGreg Ungerer1-2/+2
The MMU and non-MMU versions of thread_info.h are quite similar. Merge the two files. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2010-10-22m68k/m68knommu: Remove dead SMP config optionChristian Dietrich1-2/+1
CONFIG_SMP doesn't exist in Kconfig (for this architecure), therefore remove all references to it from the source. Signed-off-by: Christian Dietrich <qy03fugy@stud.informatik.uni-erlangen.de> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2010-10-22m68knommu: convert to using tracehook_report_syscall_*Greg Ungerer4-22/+19
Break up syscall_trace() into separate entry and exit routines that use tracehook_report_syscall_entry() and tracehook_report_syscall_exit(). Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2010-10-22m68knommu: some boards use fixed phy for FEC ethernetGreg Ungerer1-0/+16
Define a fixed phy setup for use on boarts that directly connect the FEC ethernet controller to a switch. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2010-10-21m68knommu: support the external GPIO based interrupts of the 5272Greg Ungerer1-5/+51
The external GPIO interrupts of the ColdFire 5272 SoC are edge triggered, unlike the internal interrupt sources (which are level triggered). Add proper support for these interrupts. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2010-10-21m68knommu: mask of vector bits in exception word properlyGreg Ungerer1-5/+8
The vector field of the processors exception frame actually contains both the vector exception number and fault status field bits. The exception processing code was not correctly masking out the fault status field bits before switching on the vector number. The default case was catching the bad check, but we are reporting the wrong kind of exception in some cases. Reported-by: Alexander Stein <alexander.stein@systec-electronic.com> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2010-10-21m68knommu: change to new flag variablesmatt mooney12-24/+24
Replace EXTRA_CFLAGS with ccflags-y and EXTRA_AFLAGS with asflags-y. Signed-off-by: matt mooney <mfm@muteddisk.com> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2010-10-21m68knommu: add basic mmu-less m548x supportPhilippe De Muyter6-1/+288
Add a very basic mmu-less support for coldfire m548x family. This is perhaps also valid for m547x family. The port comprises the serial, tick timer and reboot support. The gpio part compiles but is empty. This gives a functional albeit limited linux for the m548x coldfire family. This has been tested on a Freescale M548xEVB Lite board with a M5484 processor and the default dbug monitor. Signed-off-by: Philippe De Muyter <phdm@macqel.be> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2010-10-21m68knommu: .gitignore vmlinux.ldsPhilippe De Muyter1-0/+1
Signed-off-by: Philippe De Muyter <phdm@macqel.be> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-26 06:31:18 +0300