summaryrefslogtreecommitdiff
path: root/arch/m68k
AgeCommit message (Collapse)AuthorFilesLines
2023-05-30m68k: Move signal frame following exception on 68020/030Finn Thain1-4/+10
commit b845b574f86dcb6a70dfa698aa87a237b0878d2a upstream. On 68030/020, an instruction such as, moveml %a2-%a3/%a5,%sp@- may cause a stack page fault during instruction execution (i.e. not at an instruction boundary) and produce a format 0xB exception frame. In this situation, the value of USP will be unreliable. If a signal is to be delivered following the exception, this USP value is used to calculate the location for a signal frame. This can result in a corrupted user stack. The corruption was detected in dash (actually in glibc) where it showed up as an intermittent "stack smashing detected" message and crash following signal delivery for SIGCHLD. It was hard to reproduce that failure because delivery of the signal raced with the page fault and because the kernel places an unpredictable gap of up to 7 bytes between the USP and the signal frame. A format 0xB exception frame can be produced by a bus error or an address error. The 68030 Users Manual says that address errors occur immediately upon detection during instruction prefetch. The instruction pipeline allows prefetch to overlap with other instructions, which means an address error can arise during the execution of a different instruction. So it seems likely that this patch may help in the address error case also. Reported-and-tested-by: Stan Johnson <userm57@yahoo.com> Link: https://lore.kernel.org/all/CAMuHMdW3yD22_ApemzW_6me3adq6A458u1_F0v-1EYwK_62jPA@mail.gmail.com/ Cc: Michael Schmitz <schmitzmic@gmail.com> Cc: Andreas Schwab <schwab@linux-m68k.org> Cc: stable@vger.kernel.org Co-developed-by: Michael Schmitz <schmitzmic@gmail.com> Signed-off-by: Michael Schmitz <schmitzmic@gmail.com> Signed-off-by: Finn Thain <fthain@linux-m68k.org> Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> Link: https://lore.kernel.org/r/9e66262a754fcba50208aa424188896cc52a1dd1.1683365892.git.fthain@linux-m68k.org Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-04-05m68k: Only force 030 bus error if PC not in exception tableMichael Schmitz1-1/+3
[ Upstream commit e36a82bebbf7da814530d5a179bef9df5934b717 ] __get_kernel_nofault() does copy data in supervisor mode when forcing a task backtrace log through /proc/sysrq_trigger. This is expected cause a bus error exception on e.g. NULL pointer dereferencing when logging a kernel task has no workqueue associated. This bus error ought to be ignored. Our 030 bus error handler is ill equipped to deal with this: Whenever ssw indicates a kernel mode access on a data fault, we don't even attempt to handle the fault and instead always send a SEGV signal (or panic). As a result, the check for exception handling at the fault PC (buried in send_sig_fault() which gets called from do_page_fault() eventually) is never used. In contrast, both 040 and 060 access error handlers do not care whether a fault happened on supervisor mode access, and will call do_page_fault() on those, ultimately honoring the exception table. Add a check in bus_error030 to call do_page_fault() in case we do have an entry for the fault PC in our exception table. I had attempted a fix for this earlier in 2019 that did rely on testing pagefault_disabled() (see link below) to achieve the same thing, but this patch should be more generic. Tested on 030 Atari Falcon. Reported-by: Eero Tamminen <oak@helsinkinet.fi> Link: https://lore.kernel.org/r/alpine.LNX.2.21.1904091023540.25@nippy.intranet Link: https://lore.kernel.org/r/63130691-1984-c423-c1f2-73bfd8d3dcd3@gmail.com Signed-off-by: Michael Schmitz <schmitzmic@gmail.com> Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> Link: https://lore.kernel.org/r/20230301021107.26307-1-schmitzmic@gmail.com Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-11m68k: Check syscall_trace_enter() return codeMichael Schmitz3-0/+7
[ Upstream commit 2ca8a1de4437f21562e57f9ac123914747a8e7a1 ] Check return code of syscall_trace_enter(), and skip syscall if -1. Return code will be left at what had been set by ptrace or seccomp (in regs->d0). No regression seen in testing with strace on ARAnyM. Signed-off-by: Michael Schmitz <schmitzmic@gmail.com> Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> Link: https://lore.kernel.org/r/20230112035529.13521-2-schmitzmic@gmail.com Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-11m68k: /proc/hardware should depend on PROC_FSRandy Dunlap1-0/+1
[ Upstream commit 1e5b5df65af99013b4d31607ddb3ca5731dbe44d ] When CONFIG_PROC_FS is not set, there is a build error for an unused function. Make PROC_HARDWARE depend on PROC_FS to prevent this error. In file included from ../arch/m68k/kernel/setup.c:3: ../arch/m68k/kernel/setup_mm.c:477:12: error: 'hardware_proc_show' defined but not used [-Werror=unused-function] 477 | static int hardware_proc_show(struct seq_file *m, void *v) | ^~~~~~~~~~~~~~~~~~ Fixes: 66d857b08b8c ("m68k: merge m68k and m68knommu arch directories") # v3.0 Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> Link: https://lore.kernel.org/r/20230209010825.24136-1-rdunlap@infradead.org Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-02-06exit: Add and use make_task_dead.Eric W. Biederman2-2/+2
commit 0e25498f8cd43c1b5aa327f373dd094e9a006da7 upstream. There are two big uses of do_exit. The first is it's design use to be the guts of the exit(2) system call. The second use is to terminate a task after something catastrophic has happened like a NULL pointer in kernel code. Add a function make_task_dead that is initialy exactly the same as do_exit to cover the cases where do_exit is called to handle catastrophic failure. In time this can probably be reduced to just a light wrapper around do_task_dead. For now keep it exactly the same so that there will be no behavioral differences introducing this new concept. Replace all of the uses of do_exit that use it for catastraphic task cleanup with make_task_dead to make it clear what the code is doing. As part of this rename rewind_stack_do_exit rewind_stack_and_make_dead. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-25m68k: use fallback for random_get_entropy() instead of zeroJason A. Donenfeld1-1/+1
commit 0f392c95391f2d708b12971a07edaa7973f9eece upstream. In the event that random_get_entropy() can't access a cycle counter or similar, falling back to returning 0 is really not the best we can do. Instead, at least calling random_get_entropy_fallback() would be preferable, because that always needs to return _something_, even falling back to jiffies eventually. It's not as though random_get_entropy_fallback() is super high precision or guaranteed to be entropic, but basically anything that's not zero all the time is better than returning zero all the time. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Arnd Bergmann <arnd@arndb.de> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-14m68knommu: fix undefined reference to `_init_sp'Greg Ungerer1-0/+1
[ Upstream commit a71b9e66fee47c59b3ec34e652b5c23bc6550794 ] When configuring a nommu classic m68k system enabling the uboot parameter passing support (CONFIG_UBOOT) will produce the following compile error: m68k-linux-ld: arch/m68k/kernel/uboot.o: in function `process_uboot_commandline': uboot.c:(.init.text+0x32): undefined reference to `_init_sp' The logic to support this option is only used on ColdFire based platforms (in its head.S startup code). So make the selection of this option depend on building for a ColdFire based platform. Reported-by: kernel test robot <lkp@intel.com> Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Greg Ungerer <gerg@linux-m68k.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-06-14m68knommu: set ZERO_PAGE() to the allocated zeroed pageGreg Ungerer1-1/+2
[ Upstream commit dc068f46217970d9516f16cd37972a01d50dc055 ] The non-MMU m68k pagetable ZERO_PAGE() macro is being set to the somewhat non-sensical value of "virt_to_page(0)". The zeroth page is not in any way guaranteed to be a page full of "0". So the result is that ZERO_PAGE() will almost certainly contain random values. We already allocate a real "empty_zero_page" in the mm setup code shared between MMU m68k and non-MMU m68k. It is just not hooked up to the ZERO_PAGE() macro for the non-MMU m68k case. Fix ZERO_PAGE() to use the allocated "empty_zero_page" pointer. I am not aware of any specific issues caused by the old code. Link: https://lore.kernel.org/linux-m68k/2a462b23-5b8e-bbf4-ec7d-778434a3b9d7@google.com/T/#t Reported-by: Hugh Dickens <hughd@google.com> Signed-off-by: Greg Ungerer <gerg@linux-m68k.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-06-14m68k: math-emu: Fix dependencies of math emulation supportGeert Uytterhoeven1-1/+1
[ Upstream commit ed6bc6bf0a7d75e80eb1df883c09975ebb74e590 ] If CONFIG_M54xx=y, CONFIG_MMU=y, and CONFIG_M68KFPU_EMU=y: {standard input}:272: Error: invalid instruction for this architecture; needs 68000 or higher (68000 [68ec000, 68hc000, 68hc001, 68008, 68302, 68306, 68307, 68322, 68356], 68010, 68020 [68k, 68ec020], 68030 [68ec030], 68040 [68ec040], 68060 [68ec060], cpu32 [68330, 68331, 68332, 68333, 68334, 68336, 68340, 68341, 68349, 68360], fidoa [fido]) -- statement `sub.b %d1,%d3' ignored {standard input}:609: Error: invalid instruction for this architecture; needs 68020 or higher (68020 [68k, 68ec020], 68030 [68ec030], 68040 [68ec040], 68060 [68ec060]) -- statement `bfextu 4(%a1){%d0,#8},%d0' ignored {standard input}:752: Error: operands mismatch -- statement `mulu.l 4(%a0),%d3:%d0' ignored {standard input}:1155: Error: operands mismatch -- statement `divu.l %d0,%d3:%d7' ignored The math emulation support code is intended for 68020 and higher, and uses several instructions or instruction modes not available on coldfire or 68000. Originally, the dependency of M68KFPU_EMU on MMU was fine, as MMU support was only available on 68020 or higher. But this assumption was broken by the introduction of MMU support for M547x and M548x. Drop the dependency on MMU, as the code should work fine on 68020 and up without MMU (which are not yet supported by Linux, though). Add dependencies on M68KCLASSIC (to rule out Coldfire) and FPU (kernel has some type of floating-point support --- be it hardware or software emulated, to rule out anything below 68020). Fixes: 1f7034b9616e6f14 ("m68k: allow ColdFire 547x and 548x CPUs to be built with MMU enabled") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by: Greg Ungerer <gerg@linux-m68k.org> Link: https://lore.kernel.org/r/18c34695b7c95107f60ccca82a4ff252f3edf477.1652446117.git.geert@linux-m68k.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-26m68k: set a default value for MEMORY_RESERVERandy Dunlap1-0/+1
[ Upstream commit 1aaa557b2db95c9506ed0981bc34505c32d6b62b ] 'make randconfig' can produce a .config file with "CONFIG_MEMORY_RESERVE=" (no value) since it has no default. When a subsequent 'make all' is done, kconfig restarts the config and prompts for a value for MEMORY_RESERVE. This breaks scripting/automation where there is no interactive user input. Add a default value for MEMORY_RESERVE. (Any integer value will work here for kconfig.) Fixes a kconfig warning: .config:214:warning: symbol value '' invalid for MEMORY_RESERVE * Restart config... Memory reservation (MiB) (MEMORY_RESERVE) [] (NEW) Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") # from beginning of git history Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greg Ungerer <gerg@linux-m68k.org> Cc: linux-m68k@lists.linux-m68k.org Signed-off-by: Greg Ungerer <gerg@linux-m68k.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-10-17m68k: Handle arrivals of multiple signals correctlyAl Viro1-46/+42
[ Upstream commit 4bb0bd81ce5e97092dfda6a106d414b703ec0ee8 ] When we have several pending signals, have entered with the kernel with large exception frame *and* have already built at least one sigframe, regs->stkadj is going to be non-zero and regs->format/sr/pc are going to be junk - the real values are in shifted exception stack frame we'd built when putting together the first sigframe. If that happens, subsequent sigframes are going to be garbage. Not hard to fix - just need to find the "adjusted" frame first and look for format/vector/sr/pc in it. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Tested-by: Michael Schmitz <schmitzmic@gmail.com> Reviewed-by: Michael Schmitz <schmitzmic@gmail.com> Tested-by: Finn Thain <fthain@linux-m68k.org> Link: https://lore.kernel.org/r/YP2dBIAPTaVvHiZ6@zeniv-ca.linux.org.uk Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-10-06m68k: Double cast io functions to unsigned longGuenter Roeck1-10/+10
[ Upstream commit b1a89856fbf63fffde6a4771d8f1ac21df549e50 ] m68k builds fail widely with errors such as arch/m68k/include/asm/raw_io.h:20:19: error: cast to pointer from integer of different size arch/m68k/include/asm/raw_io.h:30:32: error: cast to pointer from integer of different size [-Werror=int-to-p On m68k, io functions are defined as macros. The problem is seen if the macro parameter variable size differs from the size of a pointer. Cast the parameter of all io macros to unsigned long before casting it to a pointer to fix the problem. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20210907060729.2391992-1-linux@roeck-us.net Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-22m68k: emu: Fix invalid free in nfeth_cleanup()Pavel Skripkin1-2/+2
[ Upstream commit 761608f5cf70e8876c2f0e39ca54b516bdcb7c12 ] In the for loop all nfeth_dev array members should be freed, not only the first one. Freeing only the first array member can cause double-free bugs and memory leaks. Fixes: 9cd7b148312f ("m68k/atari: ARAnyM - Add support for network access") Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Link: https://lore.kernel.org/r/20210705204727.10743-1-paskripkin@gmail.com Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-01m68k: q40: Fix info-leak in rtc_ioctlFuqian Huang1-0/+1
[ Upstream commit 7cf78b6b12fd5550545e4b73b35dca18bd46b44c ] When the option is RTC_PLL_GET, pll will be copied to userland via copy_to_user. pll is initialized using mach_get_rtc_pll indirect call and mach_get_rtc_pll is only assigned with function q40_get_rtc_pll in arch/m68k/q40/config.c. In function q40_get_rtc_pll, the field pll_ctrl is not initialized. This will leak uninitialized stack content to userland. Fix this by zeroing the uninitialized field. Signed-off-by: Fuqian Huang <huangfq.daxian@gmail.com> Link: https://lore.kernel.org/r/20190927121544.7650-1-huangfq.daxian@gmail.com Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-26m68knommu: fix overwriting of bits in ColdFire V3 cache controlGreg Ungerer1-3/+3
[ Upstream commit bdee0e793cea10c516ff48bf3ebb4ef1820a116b ] The Cache Control Register (CACR) of the ColdFire V3 has bits that control high level caching functions, and also enable/disable the use of the alternate stack pointer register (the EUSP bit) to provide separate supervisor and user stack pointer registers. The code as it is today will blindly clear the EUSP bit on cache actions like invalidation. So it is broken for this case - and that will result in failed booting (interrupt entry and exit processing will be completely hosed). This only affects ColdFire V3 parts that support the alternate stack register (like the 5329 for example) - generally speaking new parts do, older parts don't. It has no impact on ColdFire V3 parts with the single stack pointer, like the 5307 for example. Fix the cache bit defines used, so they maintain the EUSP bit when carrying out cache actions through the CACR register. Signed-off-by: Greg Ungerer <gerg@linux-m68k.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-19m68k: mac: Fix IOP status/control register writesFinn Thain1-9/+3
[ Upstream commit 931fc82a6aaf4e2e4a5490addaa6a090d78c24a7 ] When writing values to the IOP status/control register make sure those values do not have any extraneous bits that will clear interrupt flags. To place the SCC IOP into bypass mode would be desirable but this is not achieved by writing IOP_DMAINACTIVE | IOP_RUN | IOP_AUTOINC | IOP_BYPASS to the control register. Drop this ineffective register write. Remove the flawed and unused iop_bypass() function. Make use of the unused iop_stop() function. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Tested-by: Stan Johnson <userm57@yahoo.com> Cc: Joshua Thompson <funaho@jurai.org> Link: https://lore.kernel.org/r/09bcb7359a1719a18b551ee515da3c4c3cf709e6.1590880333.git.fthain@telegraphics.com.au Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-19m68k: mac: Don't send IOP message until channel is idleFinn Thain1-6/+3
[ Upstream commit aeb445bf2194d83e12e85bf5c65baaf1f093bd8f ] In the following sequence of calls, iop_do_send() gets called when the "send" channel is not in the IOP_MSG_IDLE state: iop_ism_irq() iop_handle_send() (msg->handler)() iop_send_message() iop_do_send() Avoid this by testing the channel state before calling iop_do_send(). When sending, and iop_send_queue is empty, call iop_do_send() because the channel is idle. If iop_send_queue is not empty, iop_do_send() will get called later by iop_handle_send(). Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Tested-by: Stan Johnson <userm57@yahoo.com> Cc: Joshua Thompson <funaho@jurai.org> Link: https://lore.kernel.org/r/6d667c39e53865661fa5a48f16829d18ed8abe54.1590880333.git.fthain@telegraphics.com.au Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-07-22scsi: sr: remove references to BLK_DEV_SR_VENDOR, leave it enabledDiego Elio Pettenò12-12/+0
[ Upstream commit 679b2ec8e060ca7a90441aff5e7d384720a41b76 ] This kernel configuration is basically enabling/disabling sr driver quirks detection. While these quirks are for fairly rare devices (very old CD burners, and a glucometer), the additional detection of these models is a very minimal amount of code. The logic behind the quirks is always built into the sr driver. This also removes the config from all the defconfig files that are enabling this already. Link: https://lore.kernel.org/r/20200223191144.726-1-flameeyes@flameeyes.com Reviewed-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Diego Elio Pettenò <flameeyes@flameeyes.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-07-22m68k: mm: fix node memblock initAngelo Dureghello1-1/+1
[ Upstream commit c43e55796dd4d13f4855971a4d7970ce2cd94db4 ] After pulling 5.7.0 (linux-next merge), mcf5441x mmu boot was hanging silently. memblock_add() seems not appropriate, since using MAX_NUMNODES as node id, while memblock_add_node() sets up memory for node id 0. Signed-off-by: Angelo Dureghello <angelo.dureghello@timesys.com> Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Greg Ungerer <gerg@linux-m68k.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-07-22m68k: nommu: register start of the memory with memblockMike Rapoport1-1/+2
[ Upstream commit d63bd8c81d8ab64db506ffde569cc8ff197516e2 ] The m68k nommu setup code didn't register the beginning of the physical memory with memblock because it was anyway occupied by the kernel. However, commit fa3354e4ea39 ("mm: free_area_init: use maximal zone PFNs rather than zone sizes") changed zones initialization to use memblock.memory to detect the zone extents and this caused inconsistency between zone PFNs and the actual PFNs: BUG: Bad page state in process swapper pfn:20165 page:41fe0ca0 refcount:0 mapcount:1 mapping:00000000 index:0x0 flags: 0x0() raw: 00000000 00000100 00000122 00000000 00000000 00000000 00000000 00000000 page dumped because: nonzero mapcount CPU: 0 PID: 1 Comm: swapper Not tainted 5.8.0-rc1-00001-g3a38f8a60c65-dirty #1 Stack from 404c9ebc: 404c9ebc 4029ab28 4029ab28 40088470 41fe0ca0 40299e21 40299df1 404ba2a4 00020165 00000000 41fd2c10 402c7ba0 41fd2c04 40088504 41fe0ca0 40299e21 00000000 40088a12 41fe0ca0 41fe0ca4 0000020a 00000000 00000001 402ca000 00000000 41fe0ca0 41fd2c10 41fd2c10 00000000 00000000 402b2388 00000001 400a0934 40091056 404c9f44 404c9f44 40088db4 402c7ba0 00000001 41fd2c04 41fe0ca0 41fd2000 41fe0ca0 40089e02 4026ecf4 40089e4e 41fe0ca0 ffffffff Call Trace: [<40088470>] 0x40088470 [<40088504>] 0x40088504 [<40088a12>] 0x40088a12 [<402ca000>] 0x402ca000 [<400a0934>] 0x400a0934 Adjust the memory registration with memblock to include the beginning of the physical memory and make sure that the area occupied by the kernel is marked as reserved. Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Greg Ungerer <gerg@linux-m68k.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-06-25m68k/PCI: Fix a memory leak in an error handling pathChristophe JAILLET1-1/+3
[ Upstream commit c3f4ec050f56eeab7c1f290321f9b762c95bd332 ] If 'ioremap' fails, we must free 'bridge', as done in other error handling path bellow. Fixes: 19cc4c843f40 ("m68k/PCI: Replace pci_fixup_irqs() call with host bridge IRQ mapping hooks") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Greg Ungerer <gerg@linux-m68k.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-06-22m68k: mac: Don't call via_flush_cache() on Mac IIfxFinn Thain3-20/+8
[ Upstream commit bcc44f6b74106b31f0b0408b70305a40360d63b7 ] There is no VIA2 chip on the Mac IIfx, so don't call via_flush_cache(). This avoids a boot crash which appeared in v5.4. printk: console [ttyS0] enabled printk: bootconsole [debug0] disabled printk: bootconsole [debug0] disabled Calibrating delay loop... 9.61 BogoMIPS (lpj=48064) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) devtmpfs: initialized random: get_random_u32 called from bucket_table_alloc.isra.27+0x68/0x194 with crng_init=0 clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns futex hash table entries: 256 (order: -1, 3072 bytes, linear) NET: Registered protocol family 16 Data read fault at 0x00000000 in Super Data (pc=0x8a6a) BAD KERNEL BUSERR Oops: 00000000 Modules linked in: PC: [<00008a6a>] via_flush_cache+0x12/0x2c SR: 2700 SP: 01c1fe3c a2: 01c24000 d0: 00001119 d1: 0000000c d2: 00012000 d3: 0000000f d4: 01c06840 d5: 00033b92 a0: 00000000 a1: 00000000 Process swapper (pid: 1, task=01c24000) Frame format=B ssw=0755 isc=0200 isb=fff7 daddr=00000000 dobuf=01c1fed0 baddr=00008a6e dibuf=0000004e ver=f Stack from 01c1fec4: 01c1fed0 00007d7e 00010080 01c1fedc 0000792e 00000001 01c1fef4 00006b40 01c80000 00040000 00000006 00000003 01c1ff1c 004a545e 004ff200 00040000 00000000 00000003 01c06840 00033b92 004a5410 004b6c88 01c1ff84 000021e2 00000073 00000003 01c06840 00033b92 0038507a 004bb094 004b6ca8 004b6c88 004b6ca4 004b6c88 000021ae 00020002 00000000 01c0685d 00000000 01c1ffb4 0049f938 00409c85 01c06840 0045bd40 00000073 00000002 00000002 00000000 Call Trace: [<00007d7e>] mac_cache_card_flush+0x12/0x1c [<00010080>] fix_dnrm+0x2/0x18 [<0000792e>] cache_push+0x46/0x5a [<00006b40>] arch_dma_prep_coherent+0x60/0x6e [<00040000>] switched_to_dl+0x76/0xd0 [<004a545e>] dma_atomic_pool_init+0x4e/0x188 [<00040000>] switched_to_dl+0x76/0xd0 [<00033b92>] parse_args+0x0/0x370 [<004a5410>] dma_atomic_pool_init+0x0/0x188 [<000021e2>] do_one_initcall+0x34/0x1be [<00033b92>] parse_args+0x0/0x370 [<0038507a>] strcpy+0x0/0x1e [<000021ae>] do_one_initcall+0x0/0x1be [<00020002>] do_proc_dointvec_conv+0x54/0x74 [<0049f938>] kernel_init_freeable+0x126/0x190 [<0049f94c>] kernel_init_freeable+0x13a/0x190 [<004a5410>] dma_atomic_pool_init+0x0/0x188 [<00041798>] complete+0x0/0x3c [<000b9b0c>] kfree+0x0/0x20a [<0038df98>] schedule+0x0/0xd0 [<0038d604>] kernel_init+0x0/0xda [<0038d610>] kernel_init+0xc/0xda [<0038d604>] kernel_init+0x0/0xda [<00002d38>] ret_from_kernel_thread+0xc/0x14 Code: 0000 2079 0048 10da 2279 0048 10c8 d3c8 <1011> 0200 fff7 1280 d1f9 0048 10c8 1010 0000 0008 1080 4e5e 4e75 4e56 0000 2039 Disabling lock debugging due to kernel taint Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b Thanks to Stan Johnson for capturing the console log and running git bisect. Git bisect said commit 8e3a68fb55e0 ("dma-mapping: make dma_atomic_pool_init self-contained") is the first "bad" commit. I don't know why. Perhaps mach_l2_flush first became reachable with that commit. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-and-tested-by: Stan Johnson <userm57@yahoo.com> Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Cc: Joshua Thompson <funaho@jurai.org> Link: https://lore.kernel.org/r/b8bbeef197d6b3898e82ed0d231ad08f575a4b34.1589949122.git.fthain@telegraphics.com.au Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-27m68k: Call timer_interrupt() with interrupts disabledFinn Thain11-47/+105
[ Upstream commit 1efdd4bd254311498123a15fa0acd565f454da97 ] Some platforms execute their timer handler with the interrupt priority level set below 6. That means the handler could be interrupted by another driver and this could lead to re-entry of the timer core. Avoid this by use of local_irq_save/restore for timer interrupt dispatch. This provides mutual exclusion around the timer interrupt flag access which is needed later in this series for the clocksource conversion. Reported-by: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/alpine.DEB.2.21.1811131407120.2697@nanos.tec.linutronix.de Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-27m68k: mac: Fix VIA timer counter accessesFinn Thain1-49/+53
[ Upstream commit 0ca7ce7db771580433bf24454f7a1542bd326078 ] This resolves some bugs that affect VIA timer counter accesses. Avoid lost interrupts caused by reading the counter low byte register. Make allowance for the fact that the counter will be decremented to 0xFFFF before being reloaded. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-01m68k: fix command-line parsing when passed from u-bootAngelo Dureghello1-1/+1
[ Upstream commit 381fdd62c38344a771aed06adaf14aae65c47454 ] This patch fixes command_line array zero-terminated one byte over the end of the array, causing boot to hang. Signed-off-by: Angelo Dureghello <angelo@sysam.it> Signed-off-by: Greg Ungerer <gerg@linux-m68k.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-10-05m68k: Prevent some compiler warnings in Coldfire buildsFinn Thain3-10/+6
[ Upstream commit 94c04390225bcd8283103fd0c04be20cc30cc979 ] Since commit d3b41b6bb49e ("m68k: Dispatch nvram_ops calls to Atari or Mac functions"), Coldfire builds generate compiler warnings due to the unconditional inclusion of asm/atarihw.h and asm/macintosh.h. The inclusion of asm/atarihw.h causes warnings like this: In file included from ./arch/m68k/include/asm/atarihw.h:25:0, from arch/m68k/kernel/setup_mm.c:41, from arch/m68k/kernel/setup.c:3: ./arch/m68k/include/asm/raw_io.h:39:0: warning: "__raw_readb" redefined #define __raw_readb in_8 In file included from ./arch/m68k/include/asm/io.h:6:0, from arch/m68k/kernel/setup_mm.c:36, from arch/m68k/kernel/setup.c:3: ./arch/m68k/include/asm/io_no.h:16:0: note: this is the location of the previous definition #define __raw_readb(addr) \ ... This issue is resolved by dropping the asm/raw_io.h include. It turns out that asm/io_mm.h already includes that header file. Moving the relevant macro definitions helps to clarify this dependency and make it safe to include asm/atarihw.h. The other warnings look like this: In file included from arch/m68k/kernel/setup_mm.c:48:0, from arch/m68k/kernel/setup.c:3: ./arch/m68k/include/asm/macintosh.h:19:35: warning: 'struct irq_data' declared inside parameter list will not be visible outside of this definition or declaration extern void mac_irq_enable(struct irq_data *data); ^~~~~~~~ ... This issue is resolved by adding the missing linux/irq.h include. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Acked-by: Greg Ungerer <gerg@linux-m68k.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-03-23m68k: Add -ffreestanding to CFLAGSFinn Thain1-1/+4
commit 28713169d879b67be2ef2f84dcf54905de238294 upstream. This patch fixes a build failure when using GCC 8.1: /usr/bin/ld: block/partitions/ldm.o: in function `ldm_parse_tocblock': block/partitions/ldm.c:153: undefined reference to `strcmp' This is caused by a new optimization which effectively replaces a strncmp() call with a strcmp() call. This affects a number of strncmp() call sites in the kernel. The entire class of optimizations is avoided with -fno-builtin, which gets enabled by -ffreestanding. This may avoid possible future build failures in case new optimizations appear in future compilers. I haven't done any performance measurements with this patch but I did count the function calls in a defconfig build. For example, there are now 23 more sprintf() calls and 39 fewer strcpy() calls. The effect on the other libc functions is smaller. If this harms performance we can tackle that regression by optimizing the call sites, ideally using semantic patches. That way, clang and ICC builds might benfit too. Cc: stable@vger.kernel.org Reference: https://marc.info/?l=linux-m68k&m=154514816222244&w=2 Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-13m68k: Fix memblock-related crashesGeert Uytterhoeven2-2/+2
[ Upstream commit bed1369f51901b17108a4bb4f7210aab183bea42 ] When running the kernel in Fast RAM on Atari: Ignoring memory chunk at 0x0:0xe00000 before the first chunk ... Unable to handle kernel NULL pointer dereference at virtual address (ptrval) Oops: 00000000 Modules linked in: PC: [<0069dbac>] free_all_bootmem+0x12c/0x186 SR: 2714 SP: (ptrval) a2: 005e3314 d0: 00000000 d1: 0000000a d2: 00000e00 d3: 00000000 d4: 005e1fc0 d5: 0000001a a0: 01000000 a1: 00000000 Process swapper (pid: 0, task=(ptrval)) Frame format=7 eff addr=00000736 ssw=0505 faddr=00000736 wb 1 stat/addr/data: 0000 00000000 00000000 wb 2 stat/addr/data: 0000 00000000 00000000 wb 3 stat/addr/data: 0000 00000736 00000000 push data: 00000000 00000000 00000000 00000000 Stack from 005e1f84: 00000000 0000000a 027d3260 006b5006 00000000 00000000 00000000 00000000 0004f062 0003a220 0069e272 005e1ff8 0000054c 00000000 00e00000 00000000 00000001 00693cd8 027d3260 0004f062 0003a220 00691be6 00000000 00000000 00000000 00000000 00000000 00000000 006b5006 00000000 00690872 Call Trace: [<0004f062>] printk+0x0/0x18 [<0003a220>] parse_args+0x0/0x2d4 [<0069e272>] memblock_virt_alloc_try_nid+0x0/0xa4 [<00693cd8>] mem_init+0xa/0x5c [<0004f062>] printk+0x0/0x18 [<0003a220>] parse_args+0x0/0x2d4 [<00691be6>] start_kernel+0x1ca/0x462 [<00690872>] _sinittext+0x872/0x11f8 Code: 7a1a eaae 2270 6db0 0061 ef14 2f01 2f03 <96a9> 0736 2203 e589 d681 e78b d6a9 0732 2f03 2f40 0034 4eb9 0069 b8d0 260e 4fef Disabling lock debugging due to kernel taint Kernel panic - not syncing: Attempted to kill the idle task! As the kernel must run in the memory chunk with the lowest address, ST-RAM is ignored, and removed from the m68k_memory[] array. However, it is not removed from memblock, causing a crash later. More investigation shows that there are 3 places where memory chunks are ignored, all after the calls to memblock_add() in m68k_parse_bootinfo(), and thus causing crashes: 1. On classic m68k CPUs with a MMU, paging_init() ignores all memory chunks below the first chunk, cfr. above, 2. On Amigas equipped with a Zorro III bus, config_amiga() ignores all Zorro II memory, 3. If CONFIG_SINGLE_MEMORY_CHUNK=y, m68k_parse_bootinfo() ignores all but the first memory chunk. Fix this by moving the calls to memblock_add() from m68k_parse_bootinfo() to paging_init(), after all ignored memory chunks have been removed from m68k_memory[]. Reported-by: Andreas Schwab <schwab@linux-m68k.org> Fixes: 1008a11590b966b4 ("m68k: switch to MEMBLOCK + NO_BOOTMEM") Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-12-29mm: make the __PAGETABLE_PxD_FOLDED defines non-emptyMartin Schwidefsky1-2/+2
[ Upstream commit a8874e7e8a8896f2b6c641f4b8e2473eafd35204 ] Change the currently empty defines for __PAGETABLE_PMD_FOLDED, __PAGETABLE_PUD_FOLDED and __PAGETABLE_P4D_FOLDED to return 1. This makes it possible to use __is_defined() to test if the preprocessor define exists. Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-11-13crypto: speck - remove SpeckJason A. Donenfeld12-12/+0
commit 578bdaabd015b9b164842c3e8ace9802f38e7ecc upstream. These are unused, undesired, and have never actually been used by anybody. The original authors of this code have changed their mind about its inclusion. While originally proposed for disk encryption on low-end devices, the idea was discarded [1] in favor of something else before that could really get going. Therefore, this patch removes Speck. [1] https://marc.info/?l=linux-crypto-vger&m=153359499015659 Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Acked-by: Eric Biggers <ebiggers@google.com> Cc: stable@vger.kernel.org Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-03m68k: fix early memory reservation for ColdFire MMU systemsMike Rapoport1-1/+1
The bootmem to memblock conversion introduced by the commit 1008a11590b9 ("m68k: switch to MEMBLOCK + NO_BOOTMEM") made reservation of kernel code and data to start from a wrong address. Fix it. Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Tested-by: Angelo Dureghello <angelo@sysam.it> Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
2018-08-31m68k/mac: Use correct PMU response formatFinn Thain1-6/+4
Now that the 68k Mac port has adopted the via-pmu driver, it must decode the PMU response accordingly otherwise the date and time will be wrong. Fixes: ebd722275f9cfc67 ("macintosh/via-pmu: Replace via-pmu68k driver with via-pmu driver") Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2018-08-24kbuild: rename LDFLAGS to KBUILD_LDFLAGSMasahiro Yamada1-1/+1
Commit a0f97e06a43c ("kbuild: enable 'make CFLAGS=...' to add additional options to CC") renamed CFLAGS to KBUILD_CFLAGS. Commit 222d394d30e7 ("kbuild: enable 'make AFLAGS=...' to add additional options to AS") renamed AFLAGS to KBUILD_AFLAGS. Commit 06c5040cdb13 ("kbuild: enable 'make CPPFLAGS=...' to add additional options to CPP") renamed CPPFLAGS to KBUILD_CPPFLAGS. For some reason, LDFLAGS was not renamed. Using a well-known variable like LDFLAGS may result in accidental override of the variable. Kbuild generally uses KBUILD_ prefixed variables for the internally appended options, so here is one more conversion to sanitize the naming convention. I did not touch Makefiles under tools/ since the tools build system is a different world. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reviewed-by: Palmer Dabbelt <palmer@sifive.com>
2018-08-20Merge branch 'for-next' of ↵Linus Torvalds2-2/+31
git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu Pull m68knommu updates from Greg Ungerer: "Only two changes. One cleans up warnings in the ColdFire DMA code, the other stubs out (with warnings) ColdFire clock api functions not normally used" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu: m68knommu: Fix typos in Coldfire 5272 DMA debug code m68k: coldfire: Normalize clk API
2018-08-18Merge branch 'akpm' (patches from Andrew)Linus Torvalds1-2/+2
Merge updates from Andrew Morton: - a few misc things - a few Y2038 fixes - ntfs fixes - arch/sh tweaks - ocfs2 updates - most of MM * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (111 commits) mm/hmm.c: remove unused variables align_start and align_end fs/userfaultfd.c: remove redundant pointer uwq mm, vmacache: hash addresses based on pmd mm/list_lru: introduce list_lru_shrink_walk_irq() mm/list_lru.c: pass struct list_lru_node* as an argument to __list_lru_walk_one() mm/list_lru.c: move locking from __list_lru_walk_one() to its caller mm/list_lru.c: use list_lru_walk_one() in list_lru_walk_node() mm, swap: make CONFIG_THP_SWAP depend on CONFIG_SWAP mm/sparse: delete old sparse_init and enable new one mm/sparse: add new sparse_init_nid() and sparse_init() mm/sparse: move buffer init/fini to the common place mm/sparse: use the new sparse buffer functions in non-vmemmap mm/sparse: abstract sparse buffer allocations mm/hugetlb.c: don't zero 1GiB bootmem pages mm, page_alloc: double zone's batchsize mm/oom_kill.c: document oom_lock mm/hugetlb: remove gigantic page support for HIGHMEM mm, oom: remove sleep from under oom_lock kernel/dma: remove unsupported gfp_mask parameter from dma_alloc_from_contiguous() mm/cma: remove unsupported gfp_mask parameter from cma_alloc() ...
2018-08-18mm: convert return type of handle_mm_fault() caller to vm_fault_tSouptick Joarder1-2/+2
Use new return type vm_fault_t for fault handler. For now, this is just documenting that the function returns a VM_FAULT value rather than an errno. Once all instances are converted, vm_fault_t will become a distinct type. Ref-> commit 1c8f422059ae ("mm: change return type to vm_fault_t") In this patch all the caller of handle_mm_fault() are changed to return vm_fault_t type. Link: http://lkml.kernel.org/r/20180617084810.GA6730@jordon-HP-15-Notebook-PC Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Richard Henderson <rth@twiddle.net> Cc: Tony Luck <tony.luck@intel.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Michal Simek <monstr@monstr.eu> Cc: James Hogan <jhogan@kernel.org> Cc: Ley Foon Tan <lftan@altera.com> Cc: Jonas Bonn <jonas@southpole.se> Cc: James E.J. Bottomley <jejb@parisc-linux.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: David S. Miller <davem@davemloft.net> Cc: Richard Weinberger <richard@nod.at> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: "Levin, Alexander (Sasha Levin)" <alexander.levin@verizon.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-17Merge tag 'powerpc-4.19-1' of ↵Linus Torvalds4-47/+13
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: "Notable changes: - A fix for a bug in our page table fragment allocator, where a page table page could be freed and reallocated for something else while still in use, leading to memory corruption etc. The fix reuses pt_mm in struct page (x86 only) for a powerpc only refcount. - Fixes to our pkey support. Several are user-visible changes, but bring us in to line with x86 behaviour and/or fix outright bugs. Thanks to Florian Weimer for reporting many of these. - A series to improve the hvc driver & related OPAL console code, which have been seen to cause hardlockups at times. The hvc driver changes in particular have been in linux-next for ~month. - Increase our MAX_PHYSMEM_BITS to 128TB when SPARSEMEM_VMEMMAP=y. - Remove Power8 DD1 and Power9 DD1 support, neither chip should be in use anywhere other than as a paper weight. - An optimised memcmp implementation using Power7-or-later VMX instructions - Support for barrier_nospec on some NXP CPUs. - Support for flushing the count cache on context switch on some IBM CPUs (controlled by firmware), as a Spectre v2 mitigation. - A series to enhance the information we print on unhandled signals to bring it into line with other arches, including showing the offending VMA and dumping the instructions around the fault. Thanks to: Aaro Koskinen, Akshay Adiga, Alastair D'Silva, Alexey Kardashevskiy, Alexey Spirkov, Alistair Popple, Andrew Donnellan, Aneesh Kumar K.V, Anju T Sudhakar, Arnd Bergmann, Bartosz Golaszewski, Benjamin Herrenschmidt, Bharat Bhushan, Bjoern Noetel, Boqun Feng, Breno Leitao, Bryant G. Ly, Camelia Groza, Christophe Leroy, Christoph Hellwig, Cyril Bur, Dan Carpenter, Daniel Klamt, Darren Stevens, Dave Young, David Gibson, Diana Craciun, Finn Thain, Florian Weimer, Frederic Barrat, Gautham R. Shenoy, Geert Uytterhoeven, Geoff Levand, Guenter Roeck, Gustavo Romero, Haren Myneni, Hari Bathini, Joel Stanley, Jonathan Neuschäfer, Kees Cook, Madhavan Srinivasan, Mahesh Salgaonkar, Markus Elfring, Mathieu Malaterre, Mauro S. M. Rodrigues, Michael Hanselmann, Michael Neuling, Michael Schmitz, Mukesh Ojha, Murilo Opsfelder Araujo, Nicholas Piggin, Parth Y Shah, Paul Mackerras, Paul Menzel, Ram Pai, Randy Dunlap, Rashmica Gupta, Reza Arbab, Rodrigo R. Galvao, Russell Currey, Sam Bobroff, Scott Wood, Shilpasri G Bhat, Simon Guo, Souptick Joarder, Stan Johnson, Thiago Jung Bauermann, Tyrel Datwyler, Vaibhav Jain, Vasant Hegde, Venkat Rao, zhong jiang" * tag 'powerpc-4.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (234 commits) powerpc/mm/book3s/radix: Add mapping statistics powerpc/uaccess: Enable get_user(u64, *p) on 32-bit powerpc/mm/hash: Remove unnecessary do { } while(0) loop powerpc/64s: move machine check SLB flushing to mm/slb.c powerpc/powernv/idle: Fix build error powerpc/mm/tlbflush: update the mmu_gather page size while iterating address range powerpc/mm: remove warning about ‘type’ being set powerpc/32: Include setup.h header file to fix warnings powerpc: Move `path` variable inside DEBUG_PROM powerpc/powermac: Make some functions static powerpc/powermac: Remove variable x that's never read cxl: remove a dead branch powerpc/powermac: Add missing include of header pmac.h powerpc/kexec: Use common error handling code in setup_new_fdt() powerpc/xmon: Add address lookup for percpu symbols powerpc/mm: remove huge_pte_offset_and_shift() prototype powerpc/lib: Use patch_site to patch copy_32 functions once cache is enabled powerpc/pseries: Fix endianness while restoring of r3 in MCE handler. powerpc/fadump: merge adjacent memory ranges to reduce PT_LOAD segements powerpc/fadump: handle crash memory ranges array index overflow ...
2018-08-15Merge tag 'kconfig-v4.19-2' of ↵Linus Torvalds2-35/+1
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kconfig consolidation from Masahiro Yamada: "Consolidation of Kconfig files by Christoph Hellwig. Move the source statements of arch-independent Kconfig files instead of duplicating the includes in every arch/$(SRCARCH)/Kconfig" * tag 'kconfig-v4.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kconfig: add a Memory Management options" menu kconfig: move the "Executable file formats" menu to fs/Kconfig.binfmt kconfig: use a menu in arch/Kconfig to reduce clutter kconfig: include kernel/Kconfig.preempt from init/Kconfig Kconfig: consolidate the "Kernel hacking" menu kconfig: include common Kconfig files from top-level Kconfig kconfig: remove duplicate SWAP symbol defintions um: create a proper drivers Kconfig um: cleanup Kconfig files um: stop abusing KBUILD_KCONFIG
2018-08-13Merge branch 'locking-core-for-linus' of ↵Linus Torvalds2-19/+11
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking/atomics update from Thomas Gleixner: "The locking, atomics and memory model brains delivered: - A larger update to the atomics code which reworks the ordering barriers, consolidates the atomic primitives, provides the new atomic64_fetch_add_unless() primitive and cleans up the include hell. - Simplify cmpxchg() instrumentation and add instrumentation for xchg() and cmpxchg_double(). - Updates to the memory model and documentation" * 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (48 commits) locking/atomics: Rework ordering barriers locking/atomics: Instrument cmpxchg_double*() locking/atomics: Instrument xchg() locking/atomics: Simplify cmpxchg() instrumentation locking/atomics/x86: Reduce arch_cmpxchg64*() instrumentation tools/memory-model: Rename litmus tests to comply to norm7 tools/memory-model/Documentation: Fix typo, smb->smp sched/Documentation: Update wake_up() & co. memory-barrier guarantees locking/spinlock, sched/core: Clarify requirements for smp_mb__after_spinlock() sched/core: Use smp_mb() in wake_woken_function() tools/memory-model: Add informal LKMM documentation to MAINTAINERS locking/atomics/Documentation: Describe atomic_set() as a write operation tools/memory-model: Make scripts executable tools/memory-model: Remove ACCESS_ONCE() from model tools/memory-model: Remove ACCESS_ONCE() from recipes locking/memory-barriers.txt/kokr: Update Korean translation to fix broken DMA vs. MMIO ordering example MAINTAINERS: Add Daniel Lustig as an LKMM reviewer tools/memory-model: Fix ISA2+pooncelock+pooncelock+pombonce name tools/memory-model: Add litmus test for full multicopy atomicity locking/refcount: Always allow checked forms ...
2018-08-02kconfig: include kernel/Kconfig.preempt from init/KconfigChristoph Hellwig1-4/+1
Almost all architectures include it. Add a ARCH_NO_PREEMPT symbol to disable preempt support for alpha, hexagon, non-coldfire m68k and user mode Linux. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-08-02Kconfig: consolidate the "Kernel hacking" menuChristoph Hellwig2-7/+0
Move the source of lib/Kconfig.debug and arch/$(ARCH)/Kconfig.debug to the top-level Kconfig. For two architectures that means moving their arch-specific symbols in that menu into a new arch Kconfig.debug file, and for a few more creating a dummy file so that we can include it unconditionally. Also move the actual 'Kernel hacking' menu to lib/Kconfig.debug, where it belongs. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-08-02kconfig: include common Kconfig files from top-level KconfigChristoph Hellwig1-24/+0
Instead of duplicating the source statements in every architecture just do it once in the toplevel Kconfig file. Note that with this the inclusion of arch/$(SRCARCH/Kconfig moves out of the top-level Kconfig into arch/Kconfig so that don't violate ordering constraits while keeping a sensible menu structure. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-07-31macintosh/via-pmu: Replace via-pmu68k driver with via-pmu driverFinn Thain4-43/+11
Now that the PowerMac via-pmu driver supports m68k PowerBooks, switch over to that driver and remove the via-pmu68k driver. Tested-by: Stan Johnson <userm57@yahoo.com> Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-07-31macintosh/via-pmu68k: Don't load driver on unsupported hardwareFinn Thain1-4/+2
Don't load the via-pmu68k driver on early PowerBooks. The M50753 PMU device found in those models was never supported by this driver. Attempting to load the driver usually causes a boot hang. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Reviewed-by: Michael Schmitz <schmitzmic@gmail.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-07-30m68knommu: Fix typos in Coldfire 5272 DMA debug codeGeert Uytterhoeven1-2/+2
If DEBUG_DMA is defined: include/asm/dma.h: In function ‘set_dma_mode’: include/asm/dma.h:393: error: ‘dmabp’ undeclared (first use in this function) include/asm/dma.h:393: error: (Each undeclared identifier is reported only once include/asm/dma.h:393: error: for each function it appears in.) include/asm/dma.h: In function ‘set_dma_addr’: include/asm/dma.h:424: error: ‘dmawp’ undeclared (first use in this function) Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
2018-07-30m68k: coldfire: Normalize clk APIGeert Uytterhoeven1-0/+29
Coldfire still provides its own variant of the clk API rather than using the generic COMMON_CLK API. This generally works, but it causes some link errors with drivers using the clk_round_rate(), clk_set_rate(), clk_set_parent(), or clk_get_parent() functions when a platform lacks those interfaces. This adds empty stub implementations for each of them, and I don't even try to do something useful here but instead just print a WARN() message to make it obvious what is going on if they ever end up being called. The drivers that call these won't be used on these platforms (otherwise we'd get a link error today), so the added code is harmless bloat and will warn about accidental use. Based on commit bd7fefe1f06ca6cc ("ARM: w90x900: normalize clk API"). Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
2018-07-29m68k/defconfig: Update defconfigs for v4.18-rc6Geert Uytterhoeven12-143/+218
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2018-07-29m68k: switch to MEMBLOCK + NO_BOOTMEMMike Rapoport7-61/+29
In m68k the physical memory is described by [memory_start, memory_end] for !MMU variant and by m68k_memory array of memory ranges for the MMU version. This information is directly use to register the physical memory with memblock. The reserve_bootmem() calls are replaced with memblock_reserve() and the bootmap bitmap allocation is simply dropped. Since the MMU variant creates early mappings only for the small part of the memory we force bottom-up allocations in memblock. Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Acked-by: Greg Ungerer <gerg@linux-m68k.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2018-07-29m68k/page_no.h: force __va argument to be unsigned longMike Rapoport1-1/+1
Add explicit casting to unsigned long to the __va() parameter Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Acked-by: Greg Ungerer <gerg@linux-m68k.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2018-07-29m68k/bitops: convert __ffs to match generic declarationMike Rapoport1-2/+6
The generic bitops declare __ffs as static inline unsigned long __ffs(unsigned long word); Convert the m68k version to match the generic declaration. Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Acked-by: Greg Ungerer <gerg@linux-m68k.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-08-27 15:52:53 +0300